12 best neo neodymium magnets

• The Applied Magnets Super Strong Neodymium Magnet is one of the world’s strongest and most powerful rare earth magnets. We manufacture every piece in state of the art ISO certified Magnet manufacturing facilities to ensure maximum quality.
• STRONG - Includes 10 Neodymium Rare Earth Permanent Cup Magnets 1.26" diameter x 0.31" thick with incredible Grade N42 Magnetic Energy, stronger than N40, N38, N35, and a whopping 10x Stronger than the strongest ceramic magnet.
• POWERFUL - Applied Magnets Rare Earth Neodymium Magnets have an estimated pull force of 90 lbs. and are triple layer coated (nickel-copper-nickel) for maximum durability and protection against corrosion.
• USEFUL – Use your rare earth magnet for just about anything, including finding studs in your wall, fastening, holding, lifting objects, various projects & presentations, education, & more. NASA even uses them on Mars Exploration Rovers!
• SATISFACTION GUARANTEED – We’re confident that you’ll love our Neodymium Permanent magnets, which is why we’re happy to include a 100% satisfaction, 30-day guarantee with your neodymium order.

User questions & answers

Question:	Are these available in 1" size
Answer:	im sorry but the smallest size available through Amazon is 1.26"
Question:	What dia. is the hole
Answer:	.22" as per the details
Question:	Can i hang a 1/12 lb tin sign on my fridge with these magnets? Maybe dumb question but will it damage my refrigerator
Answer:	These are far more than strong enough to hold up a 1/12 pound (1.33 ounce) weight. The question becomes, Is the "tin" sign really tin, or is it steel? Tin is "paramagnetic" and not very attracted to magnets. Steel is very attracted to magnets. The "magnetism" will not harm your fridge, but ... strong magnets like these can get away from you if you let them. They can pinch your finger between the magnet the a fridge door if you're not careful. I'm using them to hold a K-cup rack beneath a kitchen cabinet, among other uses. Hope this helps.
Question:	Will they hold 90lbs each of vertical pull, or 9lbs each (x10 magnets = 90 lbs total
Answer:	90 lbs is the force required to separate 2 of the cup magnets from each other.Rule of thumb is to divide by 3 for what weight 1 of the cup magnets will support....so...about 30 lbs.

Product features

SAFELY Separate your Applied Magnets Products !!

CORRECT 1. Slide one magnet off the top of the stack. 2. Once off thestack,carefully start lifting the magnet. 3. Lift the magnet to free it from the stack. INCORRECT 1. DO NOT attempt to pull, lift, or pry amagnet from the stack before sliding it to the side. 2. DO NOT throw away the white storage spacers. 3. DO NOT allow the magnets to snap to each other or any magnetic surface. doing so may cause magnets to break!

CAUTION When you use these Magnets

1. Keep away from pacemakers.

2. Powerful magnets can hurt your fingers.

3. Not for children, parental supervision required.

4. All magnets may chip and shatter, but if used correctly can last a lifetime.

5. If damaged please dispose of completely. Shards are still magnetized and if swallowed can inflict serious damage.

Product description

CONGRATULATIONS!



Your search for the Perfect Neodymium Magnets is officially over!



X-bet N52 Neodymium magnets (also known as Neo, NdFeB, NIB) are designed & manufactured to meet the highest quality standards using the latest technology!



Main Advantages:

Made from neodymium, iron, boron and other minor elements N45NdFeB which have a high resistance to demagnetization, unlike most other types of magnets. They will not lose their magnetization around other magnets or if dropped.

Max Operating Temperature: 80°C/176°F

Nickel-Copper-Nickel triple layer coated for maximum durability and protection again corrosion.

Strength - 13,200 internal Gauss. If you are currently using ceramic magnets in your project, you could probably use a much smaller neodymium magnet and have greater holding force.

X-bet magnets offer the highest quality magnets with consistent performance at lowest price.

Using:

Home Improvement, Industrial Equipment, Electronics, Healthcare & Medicine, Jewellery, Automotive, Arts & Crafts, Hobby & Science Projects etc.

Notes:

All magnets are fragile and may snap when collide into each other or a steel. If not usecarefully, they will be broken. If handled correctly, they will last for a lifetime

Keep it away from children under 5 years old

Return & Warranty:

30 Days Money Back Guarantee. We'll refund every penny (or replace it)!

Feedback

We request that you contact us immediately BEFORE you give us negative feedback, so that we can satisfactorily address your concerns

-> Receive the X-bet MAGNET now!

• GRADE N52 neodymium-iron-boron (NdFeB) NEODYMIUM MAGNET with 33 LB of holding force per magnet and 13,200 internal GAUSS
• NI+CU+NI TRIPLE LAYER PLATED, THE BEST COATING AVAILABLE. Tight tolerance +/-0.002"
• MAX OPERATING TEMPERATURE: 80°C/176°F MAGNETIZED THROUGH THICKNESS so that the N and S poles are on the opposite flat surfaces
• HIGH QUALITY MAGNET made under ISO 9001:2008 certified management system
• 30 DAYS MONEY BACK GUARANTEE: If there is a problem, we'll refund every penny (or replace it)

User questions & answers

Question:	Can this type of magnet be used to magnetize water for health benefits
Answer:	Yes. Placing these magnets around water pipes will ionize calcium and other minerals in the water so that they will not create as much scaling, or buildup, in your pipes. It will also "soften" the water by charging the calcium and magnesium to where they are not attracted to the molecules of soap. Your wording in the question is a little off, but magnets are a better and cheaper, not to mention brilliant, substitute for salt based water softeners - which cause more problems in your health than you know. I tested a pair of 1" cube magnets on my shower pipe and IMMEDIATELY noticed the water felt much silkier and softer. I tested the lathering of the soap between the shower water and the bathroom faucet (which didn't have any magnets on the pipe) and the shower water made several times more suds than the faucet water was able to do with the same amount of soap. NO LONGER A MYTH. Culligan and other water companies have done their best to NOT show you these SIMPLE AND POWERFUL substitutes to their water softening systems that cost on average SEVERAL THOUSAND DOLLARS A YEAR to maintain and operate. Magnets are cheap so try it out if you don't believe my success story.
Question:	Do you think these will hold a small nylon bag in place on a motorcylce gas tank
Answer:	It will definitely hold! The only problem you'd have to worry about would be the nylon bag ripping (if you're planning on driving the motorcycle with the bag/magnet).
Question:	Is the "north" of the magnet on the small end or along the long side
Answer:	Long
Question:	Does it come with a case? Like the clear one in the review
Answer:	Yes it comes with the clear case but it is a little flimsy. I cracked the top of it when I put the magnet back in and put the cap on.

User questions & answers

Question:	I want to use magnets to hold boutenieres on lapels for a wedding. Will a dab of hot glue hold the magnet to the bout? 16 to do and not much Time
Answer:	Do not use a hot glue gun on neodymium magnets! While this adhesive works really well on so many surfaces, the high temperatures can demagnetize your magnets. Even the so-called low temperature hot melts are well above the Maximum Operating Temperatures of most neodymium magnets. Don't do it! In a majority of applications, we see, epoxy works best. It's generally good at bonding with both the nickel plating of our magnets and many other surfaces.
Question:	Can this be used to detect nails for drywall that is behind a brick wall
Answer:	These strong neodymium magnets are good to locate steel nails that hold the drywall. If you slowly slide a magnet along the surface of your drywall, it will be attracted to the steel nails/screws that come up very close to the surface of the wall. But cover the magnet with a piece of tape before sliding it all around your painted wall. Neodymium magnets are coated with metal which can make marks on the wall.
Question:	Woild these be good to add weight to the bottom cornor of a flag to prevent it from getting tangled
Answer:	These magnets have a very powerful magnetic field, but they are very thin and light weight. The weight of a single magnet is about 0.267oz.
Question:	Does stacking two or more of these increase the gauss rating? I'm looking for 12,000 to 15,000 gauss
Answer:	They seem to be slightly stronger when stacked, I believe there is too much diminishing returns to reach 12k-15k gauss with these.

Product features

SET OF RARE-EARTH PERMANENT MAGNETS

Magnets have huge significance in the modern world. It is difficult to envision existence without their contributions in today's products.

These magnets are used with applications across educational, household or business segments:

CONVENIENT SIZE

Our magnets come in 1.26" diameter and 0.06" thickness which is an ideal size for a variety of applications. Neodymium magnets are solid. If you haven't handled neodymium magnets before, you will be amazed at their remarkable quality and will love it for its many amazing features and benefits.

SAFETY PRECAUSTIONS

Small parts are not for children under 3 years or any individuals who have a tendency to place inedible objects in their mouth. Magnets could affect the functioning of pacemakers and implanted heart defibrillators. If you wear these devices keep sufficient distance to magnets.

POWERFUL GRADE

Our magnet discs are the strongest and most powerful grade of commercially available Neodymium magnets which have the capacity to hold up to 8.5 pounds of weight – thus letting you hang/hold an impressive amount of load despite its coin-like small size.

• The Applied Magnets Super Strong Neodymium Magnet is one of the world’s strongest and most powerful rare earth magnets. We manufacture every piece in state of the art ISO certified Magnet manufacturing facilities to ensure maximum quality.
• STRONG - Includes 4 Neodymium Rare Earth Permanent Magnet Discs with incredible Magnetic Energy, and a whopping 10x Stronger than the strongest ceramic magnet.
• POWERFUL - Applied Magnets Rare Earth Neodymium Magnets have an estimated pull force of 18 lbs. and are triple layer coated (nickel-copper-nickel) for maximum durability and protection against corrosion.
• USEFUL – Use your rare earth magnet for just about anything, including finding studs in your wall, fastening, lifting, hanging objects, various projects & presentations, education, & more. NASA even uses them on Mars Exploration Rovers!
• SATISFACTION GUARANTEED – We’re confident that you’ll love our Neodymium Permanent magnets, which is why we’re happy to include a 100% satisfaction, 30-day guarantee with your neodymium order.

User questions & answers

Question:	The description says 4pcs but the features and details say 6pcs. Which is it
Answer:	this is a 4pc I will update the details now that is a mistake.
Question:	Is this magnet enuf to attract the needle of the fuel guage on the instrument panel of aBuick auto
Answer:	im sorry but without having the application in house i cant answer that question with certainty
Question:	How brittle are these
Answer:	Not sure, but I know that if you get your finger in between 2 of then if will hurt. And they did not break.
Question:	What is the gauss strength
Answer:	BrMax: 14800 gauss.

Product features

1.26" x 1/8" NEODYMIUM DISC MAGNET FEATURES AND SPECIFICATIONS

Applied Magnets Rare Earth Neodymium Magnets (also known as Neo, NdFeB, or Super Magnets) are:

• Magnetized axially through the thickness with poles on the long flat surfaces.
• Grade N42 Magnetic Energy, stronger than N40, N38, N35, and much stronger than the strongest ceramic magnet.
• Triple layer coated (nickel-copper-nickel) for maximum durability and protection against corrosion.
• Manufactured in state of the art ISO certified Magnet manufacturing facilities to ensure maximum quality.
• Useful for just about anything including fastening, holding, hanging objects, finding studs in walls, and more.
• Made from Neodymium, Iron, Boron and other minor elements.
• Resistant to demagnetization.

How to SAFELY Separate your Applied Magnets Products ! !

CORRECT

1. Slide one magnet off the top of the stack.

2. Once off thestack,carefully start lifting the magnet.

3. Lift the magnet to free it from the stack.

INCORRECT

1. DO NOT attempt to pull, lift, or pry amagnet from the stack before sliding it to the side.

2. DO NOT throw away the white storage spacers.

3. DO NOT allow the magnets to snap to each other or any magnetic surface. doing so may cause magnets to break!

• MAGNETS COATED - Ni+Cu+Ni Triple Layer Coated. The Best Coating Available, which Provides a Shiny and Rust Resistant Protection for the Magnets.
• POWERFUL MAGNETS - Made of Strongest Magnetic Material! Strong Holding Power, Holding Power is not Less than 12 lb per Magnet with Direct Touch and Direct Pull. Rated 14,400 Gauss Internally or 5,000 Gauss on the Surface.
• DIY PROJECTS & SCIENCE EXPERIMENTS - Refrigerator Magnets, Shower Door, Work or Office, Scientific Purposes, Arts and Crafts or School Classroom.
• QUALITY GUARANTEED - Made under ISO 9001 Quality Systems. The Highest Quality Available! 30 Days Money Back Guaranteed!
• VARIOUS SIZES - If you need to buy more sizes of magnets (eg 3inch, 4inch, 5inch, etc.), please search for DIYMAG brand. DIYMAG provides professional design and consultation service according to customers’ requirements.

User questions & answers

Question:	How did they do on magnetic paint
Answer:	They are super strong and stick to just about anything - even THROUGH the box. If you are looking for magnets for kids/classrooms, find something less intense. I have to store these in the styrofoam casing and box they came in and stuff STILL sticks to them. They have a special place in my house so they won't interfere with electronics because they are STRONG. But yeah, should be great on magnetic paint. But they are VERY thin and break easily
Question:	Will these hold a cloth curtain to a metal shelf
Answer:	It depends on many factors, like the metal the shelf is made of, and how heavy the curtains are. I believe these magnets could probably manage it as long as the shelf isn’t super skinny materials or aluminum. The I find the name of these magnets to be accurate. They are pretty powerful and can probably do the job.
Question:	What grade are these magnets? They don't seem strong enough to be n52, and the grade is conveniently left out of the description
Answer:	Hmmm, I’m pretty sure that these are N52. Just keep in mind that one disk is not big, so it’s magnetic field will be relatively small. If you combine the disks without any spacers, you will see the force greatly increases to what I believe is appropriate for N52. I have never measured the grade of a magnet, but I know that these are not weak compared to toy magnets.
Question:	Has anyone that purchased these used them for diy spice jars? (specifically, is the strength appropriate? ie: not too strong or too weak
Answer:	I am going to use these for this purpose. Here's why: a standard ceramic magnet can stick to another magnet with a pretty strong pull, but on a metal surface it is much weaker. These are VERY difficult to pull away from each other, but I imagine it will be much easier to pull a spice jar off the fridge, since the fridge is not a magnet. They also provide enough strength that I am not concerned about a glass spice jar falling off the fridge.

Product features

ABOUT DIYMAG

• DIYMAG brand neodymium magnets for science, innovation, engineering, and industry. We specialize in providing strong high-quality neodymium-iron-boron (NdFeB) magnets. Our neodymium magnets are made with the world's most advanced magnetic materials. We only sell new rare earth magnets produced under license to the highest standards. 
• In addition to the DIYMAG line of permanent magnets, DIYMAG is a leading producer of magnetic products for industrial, research and engineering applications.  We produce a comprehensive line of advanced permanent magnets in many stock sizes.  Additionally, we can produce magnets to our customers specifications and private label these magnets. 

DIYMAG Neodymium Disc Magnets - 1.26"D x 0.08"H ( 20 PCS )

How to Safely Seperate Your DIYMAG Magnets?

OUR FACILITIES

We never compromise on quality and all our products are performance tested using a computer controlled tensile and compression machine. The system accurately measures the weight a magnet can hold when pulled vertically and the amount of pull a magnet can exert when there is a gap or non-magnetic material between the magnet and the material it is applied to attract. Using the best technology, we make sure our customers always get the correct magnet for their application.

• MAGNETS COATED - Ni+Cu+Ni Triple Layer Coated. The Best Coating Available, which Provides a Shiny and Rust Resistant Protection for the Magnets.
• POWERFUL MAGNETS - Made of Strongest Magnetic Material! Strong Holding Power, Holding Power is not Less than 18 lb per Magnet with Direct Touch and Direct Pull.
• MAGNETS DIMENSIONS - Diameter 32mm x Thick 3mm (approx. 1.26" x 1/8" ). Tolerances: ±0.2mm x ±0.2mm.
• DIY PROJECTS & SCIENCE EXPERIMENTS - Refrigerator Magnets, Shower Door, Work or Office, Scientific Purposes, Arts and Crafts or School Classroom.
• QUALITY GUARANTEED - Made under ISO 9001 Quality Systems. The Highest Quality Available! 30 Days Money Back Guaranteed!

User questions & answers

Question:	What is the actual size?...Anybody counter sink these with forstner bit?...If so, what size bit?..Thanks
Answer:	I used a 1.25" forstner bit and it was a fraction too small. Had to carve them out a bit too get the magnets to fit. These claim they're 1.26" in diameter and i believe that's accurate.
Question:	Is there a trick for separating them? I struggle to pull them apart
Answer:	I found sliding them off one at a time works best. Once you slide one off the top a couple of centimeters, you can separate them by pushing a thin piece of plastic between them - like a guitar pick or a tiddlywink.
Question:	Will they work with a 1inch piece of wood between them
Answer:	magnetic force dies off at the rate of about 1/r with r raised to the 4th power so the greater the 'r', the distance to the item attracted, then the attraction is reduced by a huge amount... Hold two magnets an inch apart and feel how week the force is between them, either attractive or repulsive, then try bringing them within an 8th of an inch of each other and see how the force increases!
Question:	Do they stand up to heat
Answer:	I use Neos on oil filters without a problem. Any fine ferrous material in the oil stops there. I use 1" dia x 1/2 thick 45lb pull Neos. (Strong enough to put on a closed steel tool box and pull tools to the top from the top tray inside the tool box.) No noticeable degradation in strength over 30,000 miles (car) 25,000 miles (water cooled motorcycle). As for actual temp, I would suspect much higher temp than what I run them at (180F or so), they would begin to lose their magic.

Product features

ABOUT DIYMAG

• DIYMAG brand neodymium magnets for science, innovation, engineering, and industry. We specialize in providing strong high-quality neodymium-iron-boron (NdFeB) magnets. Our neodymium magnets are made with the world's most advanced magnetic materials. We only sell new rare earth magnets produced under license to the highest standards.
• In addition to the DIYMAG line of permanent magnets, DIYMAG is a leading producer of magnetic products for industrial, research and engineering applications. We produce a comprehensive line of advanced permanent magnets in many stock sizes. Additionally, we can produce magnets to our customers specifications and private label these magnets.

DIYMAG Neodymium Disc Magnets - 1.26"D x 1/8"H ( 10 PCS )

OUR FACILITIES

We never compromise on quality and all our products are performance tested using a computer controlled tensile and compression machine. The system accurately measures the weight a magnet can hold when pulled vertically and the amount of pull a magnet can exert when there is a gap or non-magnetic material between the magnet and the material it is applied to attract. Using the best technology, we make sure our customers always get the correct magnet for their application.

Product description

About The HHOOMY Tiny Round Disc Magnets

Condition: Brand new and high quality

Color: Sliver

Shape: Round

Size: 12x3mm / Approx. 1/2” x 1/8”



Multi-Purpose Mini Magnets

As for the prefect size and magnetic, HHOOMY Mini Magnets can be easily attached to most of stainless steel refrigerator, washing machine, office whiteboard, school lockers etc.



No-Scratch Technology

These modern stainless steel magnets feature a smooth round magnet shape to avoid harming surfaces. Do no worry it might scratch the fridge, tools or your new table.



Warning:

Keep away from all children. Do not swallow or place into mouth or nose. Also keep away from heart pacemaker.

Be cautious not to collide them fiercely. Throw away when broke.



Package Includes:

25PCS x Fridge magnets

• Countless ways to re-organize and simplify your life. Organize your tools, make-up, jewelry, kitchen, office, school, classroom. There's so many ways to use magnets.
• Say Goodbye to scratches and clutter as they are past and hello to your new table tops robust, long-lasting, stainless steel, corrosion resistant Magnets made from Brushed Nickle silver satin material.
• Magnets have high resistance to demagnetization, corrosion and oxidation.
• Great for all Home, Office, Craft, Science Projects and Product Manufacturing applications.
• Your satisfaction is what drives us to provide the highest quality products. If at any time you are not completely satisfied with your purchase feel free to return it to us for a full and prompt refund- No Questions asked. We want you to be 100% satisfied 99% is not good enough for us.

User questions & answers

Question:	Will these magnets work on a magnetic glass board that calls for rare earth magnets
Answer:	Yes they will
Question:	Are these strong enough to hold through a glass panel
Answer:	How thick is the glass , it will on 1/16 “ th glass
Question:	what glue to sue to adhere this magnet to porcelain
Answer:	I would use E6000
Question:	I know heat will eventially demagnetize them, but would they hold toaster oven door closed
Answer:	Yes

Product description

LOVIMAG Neodymium Countersunk Hole Magnets - 1.26"D x 0.2"H (12 PCS)

Rare earth magnets are the strongest type of permanent magnet currently made. They are amazingly powerful for their size and have innumerable uses. These pot magnets are 1.26 inch (32mm) diameter and 0.2 inch (5mm) thick. They are magnetized through the thickness. They are composed of neodymium iron boron magnetic material and are plated in nickel-copper-nickel for a shiny corrosion resistant finish. Maximum working temperature is 176 F (80 C). Ideal for furniture fixings, hanging artwork and keeping doors and drawers closed, countersunk magnets have a central hole which allows them to be fixed to non-magnetic surfaces with a screw. Because of their superb strength these 32mm x 5mm countersunk circular magnets are also used in recovery and retrieval applications, providing an astonishing magnetic pull for a relatively small magnet. Countersunk magnets with opposite poles on the countersunk face can be used to attract two surfaces or two opposing countersunk magnets with the same pole on the countersunk face can be used to create a damping, shock absorbing or repelling effect. Also available with the north pole on the countersunk face.



Warning

1. Keep away from pacemakers.

2. Powerful magnets can hurt your fingers.

3. Not for children, parental supervision required.

4. All magnets may chip and shatter, but if used correctly can last a lifetime.

5. If damaged please dispose of completely. Shards are still magnetized and if swallowed can inflict serious damage.

• VERY DURABLE - Coated with three layers of nickel, copper and nickel to reduce corrosion and provide a smooth finish which greatly increase the longevity of the Magnets.
• POWERFUL MAGNETS - Each magnet can support 12kg pull vertically from the magnetic face when in flush contact with a mild steel surface.
• MAGNETS DIMENSIONS -32mm diameter x 5mm thick with a 5mm diameter countersunk hole for fixing ,+/-0.1mm tolerance.
• DIY PROJECTS & SCIENCE EXPERIMENTS - Refrigerator Magnets, Shower Door, Work or Office, Scientific Purposes, Arts and Crafts or School Classroom.
• QUALITY GUARANTEED - Made under ISO 9001 Quality Systems. The Highest Quality Available! 30 Days Money Back Guaranteed!

User questions & answers

Question:	where can i get a counter sink magnet with opposite poles on the counter sink face for attracting and repelling
Answer:	Appliedmagnets.com
Question:	What is the grade of magnetic energy (n number) for these
Answer:	Most likey N45 preferred for this type
Question:	What is the thread size of the magnet screws
Answer:	These powerful neodymium (Nd) magnets come with the metric equivalent of an imperial #8 x 3/4 wood screw. I checked the indent with #6 and #10 flat head screws. All three sizes fit. Nut the screw that comes with the magnets isn’t important. Use any #6, #8, or #10 FH screw that your proj ct requires. The important item is that these 1.25” x .2” Nd magnets are powerful! Rated at 12 kg (~25 lb) pull force, each magnet can support a 25 lb weight if not pulled vertically. That’s a lot of magnetic attraction. I’m using one to attach a 4 lb engineers hammer to a cast iron I-beam by a work bench. No movement at all with that heavy hammer.
Question:	I want to connect 2 desks together. If i put one magnet on one desk and another magnet on the other desk, will they connect, or do i flip one magnet
Answer:	All the magnets have the same polarity so the front of one magnets attract the back of another. They repel face to face or back to back.

• Premium brushed nickel magnets great for fridge, kitchen, office, classroom, school, science. Prefect size and easy to find.
• Set of 100, bulk package, durable disc magnets, corrosion resistant. Ideal as magnetic push pins, whiteboard magnets, dry erase board magnets,map magnets ect.
• Easily removable magnets: No marks or stains while removing from your metal board or wall etc.
• Widely used magnets in your daily life or work: crafting, jewelry, photos, greeting cards displaying, even create DIY magnet projects and more.
• Super value pack of magnets for hanging what you want.

User questions & answers

Question:	I need a magnet to hold my temp gauge (which has a magnet background) inside my geckos vivarium. Glass is not thick, will this work
Answer:	These magnets have an astoundingly strong field of influence. They will definitely be strong enough for the job.
Question:	Are these Neyodinium magnets
Answer:	Yes they are. Very strong for their tiny size.
Question:	I want to magnatize ratchet extensions and sockets. Could I glue the small ones to my extensions thereby magnitizing my sockets
Answer:	Aren't extensions already magnetized? If so, you'd simply need to magnetize the socket; however, if neither end of the connection is magnetic, you'd need to insert a magnet into both, keeping in mind how this would compromise the fitment of the socket onto your extension, causing the possibility of it falling off while in use. These are strong magnets, but likely not strong enough to make up the difference for good fitment on a socket/ratchet connection if we're talking about, say, auto mechanic work.
Question:	A project calls for rare earth magnets. Will these work
Answer:	My new glass/magnetic white board stated it needed rare earth magnets, so I bought these based on the manufacturer's answer to this question. They did NOT work.

Product features

Product Features

Magnets have enough strength, small size, light weight and have high resistance to demagnetization and belong to fragile product, so be careful during operations.

No-Scratch Technology

Each magnets won't leave a single scratch on it. Each Magnet Features Clean And Sleek Round Form Manufactured Using New No-Scratch Technology And Sturdy Magnetic Ability.

Daily Use

Yarn window installation, curtain fixing, oil-absorbing paper fixing on exhaust hoods, hanging badge boutonniere, hanging metal widget, hanging kitchenware and so on.

Product description

Rare earth magnets are the strongest type of permanent magnet currently made. They are amazingly powerful for their size and have innumerable uses.

These 32mm diameter Neodymium disc magnets produce an astonishing pull of 18lb and every magnet has a triple coating of nickel, copper and nickel again to prevent against corrosion.



These disc magnets are 1.26 inch (32mm) diameter and 0.12 inch (3mm) thick. They are magnetized through the thickness.

They are composed of grade52 neodymium iron boron magnetic material and are plated in nickel-copper-nickel for a shiny corrosion resistant finish. Maximum working temperature is 176 F (80 C).



Our Neodymium magnets are commonly used in creative applications such as models and theatre design, furniture making, exhibition stands and packaging.

They also have many uses in engineering and manufacturing where compact size and maximum strength are required.

What's more, because of their resistance to demagnetisation they are ideal for creating a shock-absorbing or damping effect when used to repel other magnets.

• MAGNETS COATED - Ni+Cu+Ni Triple Layer Coated. The Best Coating Available, which Provides a Shiny and Rust Resistant Protection for the Magnets.
• POWERFUL MAGNETS - Made of Strongest Magnetic Material! Strong Holding Power, Holding Power is not Less than 18 lb per Magnet with Direct Touch and Direct Pull.
• MAGNETS DIMENSIONS - Diameter 32mm x Thick 3mm (approx. 1.26" x 1/8" ). Tolerances: ±0.2mm x ±0.2mm.
• DIY PROJECTS & SCIENCE EXPERIMENTS - Refrigerator Magnets, Shower Door, Work or Office, Scientific Purposes, Arts and Crafts or School Classroom.
• QUALITY GUARANTEED - Made under ISO 9001 Quality Systems. The Highest Quality Available! 30 Days Money Back Guaranteed!

User questions & answers

Question:	strong enough to hold a comforter to a duvet? they are relatively thin
Answer:	Probably not. They have to be within a quarter inch or so of each other or some ferrous metal to hold very strongly. I use them to hold down some canvass material against a metal rail but I have to use one disc every foot or so.
Question:	Are these magnets food grade for use in spice jars
Answer:	they have a shiny metal outer covering which would be easy to clean. I manage a food store and would think that they would be safe. there in nothing in the packaging about being food grade. they are very fragile and have a dark material inside which is very crumbly and would be a problem if they were cracked or broken. dont let them hit together. They are very strong and easy to break.
Question:	Are these N
Answer:	I’m not sure but about half of them broke to pieces with basic use. I tried writing a review but it was refused... I might have gotten a bad batch but what I did get was not good quality!
Question:	can 10000 magnets hold a thunderbird
Answer:	Depends on where you want to hold it.

• 100% Brand New By DIYMAG. Magnetized through thickness, poles on the flat surfaces.
• Super strong and powerful magnet, much stronger than ceramic magnets!
• Dimension: Length 40mm x width 40mm x thickness 20mm Max Operating Temperature: 80°C/176°F.
• Quantity: 1 Block Industrial Lifting Rare Earth Magnets N52 per Package.
• Neodymium magnets are brittle; they can be broken or can splinter in a collision. One should wear gloves and protective glasses when handling these magnets, because splinters could disengage and fly from the magnets.You should avoid having constant contact with magnets of any size and keep a distance of at least 3 feet to large magnets.

User questions & answers

Question:	what is the pull force
Answer:	Surprisingly low!
Question:	How do you protect from other electronic ites - Such as car keys, IPhone, etc
Answer:	I have been told that many of the electronics you own are magnetically shielded, like your computer, but I am not willing to test that theory. I just keep them away from my electronics. I would also worry about the magnetic strip on your credit cards.
Question:	What grade is this
Answer:	N52
Question:	How many lbs can this magnet hold
Answer:	Depends what you’re attaching it to. A refrigerator door is quite different from a steel beam. Either way you don’t want a body part between the magnet and metal.

Product features

DIYMAG Neodymium Magnets - 40 x 40 x 20 mm

• This magnet are bounded by six equal square faces, the angle between any two adjacent faces of the magnet is a right angle.

• This magnet are made of neodymium, which makes them up to 21 times stronger than ceramic magnets of equivalent size.

• They are magnetized through the thickness. They are composed of neodymium iron boron magnetic material and are plated in nickel-copper-nickel for a shiny corrosion resistant finish. Maximum working temperature is 176 F (80 C).

How to Safely Seperate Your DIYMAG Magnets?

CORRECT

1. Slide one magnet off the top of the stack.

2. Once off thestack,carefully start lifting the magnet.

3. Lift the magnet to free it from the stack.

INCORRECT

1. DO NOT attempt to pull, lift, or pry amagnet from the stack before sliding it to the side.

2. DO NOT throw away the white storage spacers.

3. DO NOT allow the magnets to snap to each other or any magnetic surface. doing so may cause magnets to break!

• MAGNETS COATED - Ni+Cu+Ni Triple Layer Coated. The Best Coating Available, which Provides a Shiny and Rust Resistant Protection for the Magnets.
• POWERFUL MAGNETS - Made of Strongest Magnetic Material! Strong Holding Power, Holding Power is not Less than 18 lb per Magnet with Direct Touch and Direct Pull.
• MAGNETS DIMENSIONS - 60mm x 10mm x 3mm . Tolerances: ±0.2mm x ±0.2mm.
• DIY PROJECTS & SCIENCE EXPERIMENTS - Refrigerator Magnets, Shower Door, Work or Office, Scientific Purposes, Arts and Crafts or School Classroom.
• WARNING - The bar magnet is very fragile, it is forbidden to collide with other metal objects (including another magnet), so be careful when you are trying separte them !

User questions & answers

Question:	how big is this in inches
Answer:	They are not too big length about 2.4 inches
Question:	How good would these be for the metal earth models
Answer:	Not sure what those are however they are extremely strong, we are using them in an industrial setting holding clipboards to metal structures. They are a little brittle so do not bang them and you should be good to go. Be careful taking them apart and don't let them snap back to another on because they will pinch your fingers.
Question:	what is the measurement from center to center of the mounting screw holes
Answer:	1 31/32”
Question:	what is the dimension of one magent bar. Length x width x height thanks
Answer:	2-3/8" long x 1/2" wide x 1/8" thick. HOle spacing is 2"