13 best eclipse neodymium magnets

Product description

Nickel plated neodymium (rare earth) disc magnet. Neodymium magnets are the strongest magnets available. Neodymium material itself is brittle and the nickel coating provides protection to the magnet. This is a higher than standard grade of Neodymium (N38SH grade) magnets and operates at a maximum temperature (145 degrees C).

User questions & answers

Question:	How many magnets come in a pack
Answer:	One. It's a very powerful magnet.

Product description

This neo-hold bi-pole magnet (neodymium iron boron magnet assembly) has a 11 pounds pull capacity. The neodymium pole pieces are encased in an aluminum pot. Neodymium magnets can achieve equal or greater holding forces than larger conventional pot magnets.

• Aluminum pot, mild steel pole pieces
• Eclipse Magnetics is at the forefront of development in magnetic materials and design. With over 100 years of experience, we have a proven track record of supplying quality products

Product description

Plated neodymium (rare earth) disc magnet. Neodymium magnets are the strongest magnets available. Neodymium material itself is brittle and has poor corrosion resistance so it is usually coated. They are best used where space is at a premium or a very high level of magnetism is required. Alnico or ceramic magnetics are a more cost-effective alternative if the strength to size ratio is not critical. Neodymium magnets operate at a relatively low operating temperature (120 degrees C) vs alnico and ceramic magnets. Magnetism is through thickness (poles are on the circular faces).

• Neodymium (rare earth) magnet disc, nickel coated - N35 Grade (standard grade)
• Neodymium magnets are the strongest magnets available
• Operate at a relatively low operating temperature (120 degrees C) vs alnico and ceramic magnets
• 08 pounds of pull force
• 0.187-inch diameter x 0.06-inch thickness
• Eclipse Magnetics is at the forefront of development in magnetic materials and design. With over 100 years of experience, we have a proven track record of supplying quality products

Product description

Nickel plated steel pot with neodymium (rare earth) magnet, supplied with bolt and nut. Neodymium magnets are the strongest magnets available. Neodymium material itself is brittle and has poor corrosion resistance so it is usually coated or used as part of a magnetic assembly, such as this, where the neodymium material is contained in a metal "pot". They are best used where space is at a premium or a very high level of magnetism is required. Alnico or ceramic magnetics are a more cost-effective alternative if the strength to size ratio is not critical. Neodymium magnets operate at a relatively low operating temperature (120 degrees C) vs alnico and ceramic magnets.

Product description

Plated neodymium (rare earth) disc magnet. Neodymium magnets are the strongest magnets available. Neodymium material itself is brittle and has poor corrosion resistance so it is usually coated. They are best used where space is at a premium or a very high level of magnetism is required. Alnico or ceramic magnetics are a more cost-effective alternative if the strength to size ratio is not critical. Neodymium magnets operate at a relatively low operating temperature (120 degrees C) vs alnico and ceramic magnets.

• Neodymium (rare earth) magnet disc, nickel coated - N35 Grade (standard grade)
• Neodymium magnets are the strongest magnets available
• Operate at a relatively low operating temperature (120 degrees C) vs alnico and ceramic magnets
• 4.4 pounds of pull force
• 0.5-inch length, 0.5 width, 0.5-inch thickness
• Eclipse Magnetics is at the forefront of development in magnetic materials and design. With over 100 years of experience, we have a proven track record of supplying quality products

Product description

Nickel plated steel pot with neodymium (rare earth) magnet, supplied with threaded loop. Neodymium magnets are the strongest magnets available. Neodymium material itself is brittle and has poor corrosion resistance so it is usually coated or used as part of a magnetic assembly, such as this, where the neodymium material is contained in a metal "pot". They are best used where space is at a premium or a very high level of magnetism is required. Alnico or ceramic magnetics are a more cost-effective alternative if the strength to size ratio is not critical. Neodymium magnets operate at a relatively low operating temperature (120 degrees C) vs alnico and ceramic magnets.

• Nickel plated steel pot with neodymium (rare earth) magnet, supplied threaded loop
• Neodymium magnets are the strongest magnets available; the metal pot helps to contain the neodymium magnetic material
• Operate at a relatively low operating temperature (120 degrees C) vs alnico and ceramic magnets
• 200 pounds of pull force
• 2.62-inch diameter x 1-inch height
• Eclipse Magnetics is at the forefront of development in magnetic materials and design. With over 100 years of experience, we have a proven track record of supplying quality products

Product description

Nickel plated steel pot with neodymium (rare earth) magnet, supplied with threaded loop. Neodymium magnets are the strongest magnets available. Neodymium material itself is brittle and has poor corrosion resistance so it is usually coated or used as part of a magnetic assembly, such as this, where the neodymium material is contained in a metal "pot". They are best used where space is at a premium or a very high level of magnetism is required. Alnico or ceramic magnetics are a more cost-effective alternative if the strength to size ratio is not critical. Neodymium magnets operate at a relatively low operating temperature (120 degrees C) vs alnico and ceramic magnets.

• MAGNETS COATED - Ni+Cu+Ni Triple Layer Coated. The Best Coating Available, which Provides a Shiny and Rust Resistant Protection for the Magnets.
• POWERFUL MAGNETS - Made of Strongest Magnetic Material! Strong Holding Power, Holding Power is not Less than 18 lb per Magnet with Direct Touch and Direct Pull.
• MAGNETS DIMENSIONS - 60mm x 10mm x 3mm . Tolerances: ±0.2mm x ±0.2mm.
• DIY PROJECTS & SCIENCE EXPERIMENTS - Refrigerator Magnets, Shower Door, Work or Office, Scientific Purposes, Arts and Crafts or School Classroom.
• WARNING - The bar magnet is very fragile, it is forbidden to collide with other metal objects (including another magnet), so be careful when you are trying separte them !

• PREMIUM QUALITY - Our Votex drain plugs are MADE IN USA. From the Stainless Steel bar stock material, CNC machine that cuts our plug right down to the hands that craft each individual one. We carefully and pridefully construct our plugs here in our home state of Wisconsin. This ensures that your plug will be manufactured with real quality stainless steel (Not Pot Metal) that will last for countless years to come. Included with the drain plug is an aluminum crush washer.
• HIGH TEMPERATURE NEODYMIUM MAGNET – Our plug uses a rare earth high strength neodymium magnet, rated specifically to function in high temperature environments extracting unwanted ferrous particles from your vehicles engine. Neodymium magnets are one of the strongest magnets available on the planet, giving the strength to hold weights over 2.2lbs. This empowers our plug with enormous strength to effectively pull these unwanted metals out of your motor oil resulting in longer engine life.
• PREMIUM STAINLESS STEEL – The drain plug market has a plethora of options which are constructed of aluminum. Aluminum is an inferior metal choice due to its strength and commonly shear/snap leaving you with a broken plug stuck in your oil pan. Our goal is to provide plugs of the highest quality standard, that starts with using a metal that will be strong enough to last years. Our steel is sourced from the states, promising not to be a weak recycled material often found in foreign metals.
• PROMISED PERFORMANCE - Our drain plugs use choice quality materials. Our magnet will extract small metal particles that are too fine for oil filters to catch along with capturing large metal shavings that plug filters. If you're not 100% satisfied with its quality or performance, return your drain plug for a full refund!
• EASY TO INSTALL - Our plug will install in place of your current drain plug. It will arrive with an aluminum crush washer which is recommend to be replaced with every oil change. Simply wipe the magnet clean of debris during oil change. USE AMAZON FITMENT DROP DOWN, EMAIL OR ASK A QUESTION TO ENSURE THIS WILL WORK WITH YOUR VEHICLE. [ SEE PRODUCT DETAILS BELOW FOR MORE DETAILED INFORMATION ] - USES 17MM WRENCH. FOR REPLACEMENT WASHERS SEARCH PART # B07ZQP2M94

User questions & answers

Question:	I ordered this for a 2015 jeep jku - it is larger than stock and will not screw into the drain plug hole easily. is p/n dp001 correct for this jeep
Answer:	DP001 is the correct plug for all 3.6L Mopar engines. Zach
Question:	Dose this fix a 2013 Chevy Sonic
Answer:	The 2013 Chevy Sonic came with 3 different engines, and each engine takes a different size oil drain plug. The 1.4 liter turbocharged engine came with a M14-1.5 drain plug, so this plug (Votex DP001) will fit. The 1.2 liter engine takes a M12-1.75 plug, so this plug will not fit. For the 1.2 liter 4 cylinder engine, use Votex DP002, which can be found at Amazon: https://www.amazon.com/Votex-DP002-Stainless-Neodymium-Magnet/dp/B07WHFGBJQ/ref=sr_1_1?keywords=M12-1.75+votex&qid=1582895090&sr=8-1 . The 1.8 liter engine came with a M14-1.5 plug, so this part will fit. The specs say to tighten the plug to 10 ft-lbs (just tight enough to seal), or 14 Nm (120 inch pounds), as otherwise you risk stripping the oil pan threads.
Question:	Will this fit a 2015 chevy sonic lt
Answer:	Hello, Yes this will fit both the 1.4L and 1.8L. Zach
Question:	Does is fit Honda Civic
Answer:	Hello, This will fit the 1.8L yes. Zach TheAntennaSource

Product description

Alnico round bar magnets offer high temperature and corrosion resistance as well as greater magnetic pull than ceramic magnets. They are in an unpainted color of gray.

• Round Bar magnets made from Alnico Grade 5 material, unpainted in color gray and have a maximum temperature of 550 degrees C
• Length tolerance is +/- 0.045", diameter tolerance is +/- 0.032"
• 1/8-inch diameter, 4-inch length
• Maximum pull of 0.35 pounds
• Eclipse Magnetics is at the forefront of development in magnetic materials and design. With over 100 years of experience, we have a proven track record of supplying quality products

• STRONGER THAN THE COMPETITION - Made from the world's strongest magnetic element, our pure neodymium disc magnets are incredibly powerful. This set of premium rare earth magnets can handle your project or task.
• UNMATCHED QUALITY - Your safety is our highest priority. Chipped, broken magnetic shards are dangerous. We use thicker, industrial grade, durable N45 grade neodymium rather than extremely brittle N52 used by our competitors.
• PREMIUM QUALITY COATING - You will love the smooth and shiny finish. Our magnets are protected with a corrosion resistant Ni-Cu-Ni (Nickel-Copper-Nickel) coating to create a high quality silver look that doesn't rust or scratch.
• UNLIMITED USES - No matter your application, our powerful magnets can handle the job. These thin magnetic discs work great as strong refrigerator magnets, arts and crafts, DIY projects, hanging spice jars, pictures, whiteboards, tools in the garage, or science classroom at school.
• 100% "NO BREAK" MONEY-BACK GUARANTEE - If you are not absolutely thrilled with your magnets, return them for a full refund or replacement. No questions asked. We stand behind the quality of our magnets and are confident you will LOVE your magnet set. Hit "Add To Cart" now.

User questions & answers

Question:	How does this magnet stick to Wood in the picture shown? Magnets do nor stick to wood
Answer:	Wood does not have metal therefore magnets will not stick to wood. If you want to put a magnet on wood you may want to glue it on
Question:	I want to use these to make a file holder for my office so that it can be attached to the side of a file cabinet. Are these strong enough
Answer:	The magnets are. The 3m adhesive disc is probably where you would see failure. If you could somehow bond the magnets to the file holder with some strong glue... It would probably work quite well.
Question:	Would you use the magnet to mount to a motocyle gas tank
Answer:	Well I have zero knowledge of motorcycle gas tanks, all I can say is that I purchased it to attach an LED light to my sewing machine. The magnet is powerful but the self adhesive pads are not that great. Hope that helps you.
Question:	I want to use the magnets to keep wooden file drawers from sliding out of wooden cabinet. Can they oppose each other and attract or will they repel
Answer:	Magnets always have two poles, north and south. Opposite poles attract each other and the same poles are repeled. These are powerful magnets that were magnetized axially, which means one ‘face’ is north and one ‘face’ is south. So yes, they will oppose and attract each other depending on the polarity of the face (it’s easy to find which side is which based on whether it is attracted or repelled by its partner magnet). Hope this helps! As for whether these magnets have the adhensive on one pole or not, I received magnets with the adhesive on both poles 1/2 of them on N and 1/2 on S.

• MAGNETS COATED - Ni+Cu+Ni Triple Layer Coated. The Best Coating Available, which Provides a Shiny and Rust Resistant Protection for the Magnets.
• POWERFUL MAGNETS - Made of Strongest Magnetic Material! Strong Holding Power, Holding Power is not Less than 18 lb per Magnet with Direct Touch and Direct Pull.
• MAGNETS DIMENSIONS - Diameter 32mm x Thick 3mm (approx. 1.26" x 1/8" ). Tolerances: ±0.2mm x ±0.2mm.
• DIY PROJECTS & SCIENCE EXPERIMENTS - Refrigerator Magnets, Shower Door, Work or Office, Scientific Purposes, Arts and Crafts or School Classroom.
• QUALITY GUARANTEED - Made under ISO 9001 Quality Systems. The Highest Quality Available! 30 Days Money Back Guaranteed!

User questions & answers

Question:	will these work to find stud in plaster and lathe? if i put 2 or more magnets together will that strength the pull? thanks
Answer:	Worth a try, they are pretty stong
Question:	How much does each individual magnet weigh
Answer:	approx. one half an ounce. I don't have a scale that weighs ounces so this is based on shipping weight and my guess holding the magnet.
Question:	Can I attach to back of phone so I wouldn’t need to buy magnetic mount
Answer:	The 3M stickers allow you to place the magnets where you would like. Not sure how they would effect the function of your phone service.
Question:	What is the gauss rating
Answer:	I am not sure but the data sheet would give you this

Product features

ABOUT DIYMAG

• DIYMAG brand neodymium magnets for science, innovation, engineering, and industry. We specialize in providing strong high-quality neodymium-iron-boron (NdFeB) magnets. Our neodymium magnets are made with the world's most advanced magnetic materials. We only sell new rare earth magnets produced under license to the highest standards.
• In addition to the DIYMAG line of permanent magnets, DIYMAG is a leading producer of magnetic products for industrial, research and engineering applications. We produce a comprehensive line of advanced permanent magnets in many stock sizes. Additionally, we can produce magnets to our customers specifications and private label these magnets.

DIYMAG Neodymium Disc Magnets - 1.26"D x 1/8"H (16 PCS )

OUR FACILITIES

We never compromise on quality and all our products are performance tested using a computer controlled tensile and compression machine. The system accurately measures the weight a magnet can hold when pulled vertically and the amount of pull a magnet can exert when there is a gap or non-magnetic material between the magnet and the material it is applied to attract. Using the best technology, we make sure our customers always get the correct magnet for their application.

• MAGNETS COATED - Ni+Cu+Ni Triple Layer Coated. The Best Coating Available, which Provides a Shiny and Rust Resistant Protection for the Magnets.
• POWERFUL MAGNETS - Made of Strongest Magnetic Material! Strong Holding Power, Holding Power is not Less than 18 lb. per Magnet with Direct Touch and Direct Pull.
• DIY PROJECTS & SCIENCE EXPERIMENTS - Refrigerator Magnets, Shower Door, Work or Office, Scientific Purposes, Arts and Crafts or School Classroom.
• QUALITY - Made under ISO 9001 Quality Systems. The Highest Quality Available! 30 Days Money Back !
• VARIOUS SIZES - If you need to buy more sizes of magnets (e. g. 3inch, 4inch, 5inch, etc. ), please search for DIYMAG brand. DIYMAG provides professional design and consultation service according to customers’ requirements.

User questions & answers

Question:	Do these have adhesive backing? If so, you should indicate that in your product title and description
Answer:	These do not have adhesive backing. They are really strong and a bit difficult to separate when unpacked. Keep them separated from other metal objects when you work with them.

Product features

Be sure to read the following instructions before use:

CORRECT:

1.Slide one magnet off the top of the stack.

2.Once off the stack, carefully start lifting the magnet.

3.Lift the magnet to free it from the stack.

INCORRECT:

1.DO NOT attempt to pull, lift or pry a magnet from the stack before sliding it to the side.

2.DO NOT throw away the white storage spacers.

3.DO NOT allow the magnets to snap to each other or any magnetic surface. Doing so may cause magnets break!

WARNING PLEASE USE IT WITH CARE

Keep away from pacemakers and implanted cardioverter defibrillator.

Powerful magnets may hurt your fingers.

If damaged, please dispose completely.

NOT TOYS

These magnets are NOT TOYS. Don’t let children play with them.