12 best cb jack stands

Product description

Trail Jack Mount; For Use w/Pivot Heavy Duty Oversize Rear Tire Carrier PN[2843]; These are complete line of Heavy-Duty Shop Products that will bring you years of reliable performance.

• Trail Jack Mount; For Use W/Pivot Heavy Duty Oversize Rear Tire Carrier Pn[2843]; These Are Complete Line Of Heavy-Duty Shop Products That Will Bring You Years Of Reliable Performance
• These Are Complete Line Of Heavy-Duty Shop Products
• Through Creativity, Productivity And Innovation - This Brand Continues To Develop The Finest Automotive Accessories

User questions & answers

Question:	Will this work with a after market bumper
Answer:	I doubt it because this actually mounts to pre-drilled holes that are in the SmittyBilt spare tire carrier that I mounted in place of the stock hinges.
Question:	Can you mount Rotopax instead of a HiLift to this mount
Answer:	- Thanks for the query. The height of the Crown is 10.5 cm. And the brim Width is 7.5 cm
Question:	can this be locked and how much does it rattle (on and off road
Answer:	Yes, a woman surely can wear this. Kindly provide us with your head measurements in Amazon messaging so we can recommend a decent fit.
Question:	Can this fit a stock jk hinge
Answer:	No my hat was rained on and it’s still in good condition but mine has sweat stains and I’m still working on getting it out with out damaging it

Product description

RhipGear's sturdy, durable RhinoRamps allow for reliable and convenient access to the underside of your vehicle. Patented polymer internal support system and wide stance offer excellent weight distribution and unbeatable strength. The innovative CoreTRAC non-skid base helps reduce slippage while the 17 degree incline provides easy use for low clearance vehicles. These portable automotive ramps are great for cars, pick-ups, sport utility vehicles, and vans.

• Portable automotive ramps with a rugged and structural design
• Provides reliable and convenient access to the underside of your vehicle as well as nestability for maximum storage space
• CoreTRAC non-skid base helps reduce slippage
• 17 degree incline provides easy use for low clearance vehicles
• 16,000 pound GVW (gross vehicle weight) capacity

User questions & answers

Question:	My car has 305 width tires. Will they be too wide
Answer:	Hi, depending on your location ,amazon will ship FBA Prime orders from the warehouse nearest to you. Thanks. ILMotor
Question:	Where are they made
Answer:	Yes, we use it for dirt biking. My son says it’s not very warm, but it can still work if you have a face mask.
Question:	Is there a difference in height/clearance between the 12k# model and the 16k#max model or are the both 6inch clearance
Answer:	A mi me resultó las medidas que da el vendedor, tengo dos niños de la misma edad y los medí con una cinta metrica de tela , midieron diferentes M y L y les quedó perfectamente.
Question:	Can somebody tell me how much do those add to the vehicle clearance? Thanks in advance
Answer:	You can contact the seller directly to exchange the helmet for a replacement of a different size.

Product features

FLOTOOL RHINORAMPS - 11912ABMI - 16,000 lb. GVW

Lifting DIY oil change to the highest standard.

- Strong as steel: the only ‘P.A.L.D.’ certified resin ramps.

- Extra-wide tire width for supreme confidence.

- 17 degree angle for low clearance vehicles.

- Proper use guidelines must be followed (see ‘warning statement’ among images above).

FLOTOOL RHINORAMPS - 11909ABMI - 12,000 lb. GVW

Lifting DIY oil change to the highest standard.

- Strong as steel: the only ‘P.A.L.D.’ certified resin ramps.

- Wide tire width for supreme confidence.

- 17 degree angle for low clearance vehicles.

- Proper use guidelines must be followed (see ‘warning statement’ among images above).

Patented Design

Core-Trac non-skid feet reduce sliding during use while an improved tread pattern and wide design make these the most secure ramps on the market.

Strongest

The only resin ramp that meets and exceeds P.A.L.D. (Portable Automotive Lifting Device) standards.

Nestable

Space saving design for efficient storage.

• Long Cable Extension: Particularly features a 3.3 feet super long cable, making LENTION CB-C37 USB C hub an ideal solution to maximize your device's capability to create a more efficient workstation and freely adjust the desktop layout as you like
• Both Video & Audio: Mirror or extend your desktop onto any HDMI-enabled TVs, monitors or projectors via HDMI. Supporting 3840x2160 4K@30Hz, 2560x1600 and lower resolutions at 60Hz. The 3.5mm audio port support mic in & out
• Dual USB C Ports: One is only for charging which provides up to 60W power pass-through. Another is for data transfer which supports USB 3.0 standard with speed up to 5Gbps (not support video signal transfer). Dual USB C ports can work simulaneously
• Super Speed Transmission: 2 USB-A female ports support USB 3.0 super speed transmission (up to 5 Gbps). SD & Micro SD card readers support UHS-1 (up to 95 MB/S), both card reader slots can read and write simultaneously
• Universal Compatibility: Broadly work with MacBook Air/Pro 2020 M1 Version, 2016 2017 2018 2019 2020 MacBook Pro 13/15/16 with Thunderbolt 3 ports, New MacBook Air with Thunderbolt 3 ports, MacBook 12, Surface Go/Book 2/Pro 7, Chromebook, More. (Not for previous generation of MacBook Air & Pro; Not for Apple SuperDrive)

User questions & answers

Question:	Does cable work on IPads
Answer:	Yes IF U HAVE IPAD PRO WITH USB-C INPUT (NOT LIGHTNING)
Question:	Is it compatible to Surface pro x
Answer:	I am not sure.

Product features

Fulfill Your Need

The hub have 8 ports for you to support your work and your entertainment. The perfect match for office, presentations, movies, and gaming.

Longer Cable Extension

Explore more possibilities with 3.3-ft cable, put your device wherever you like and enjoy the stunning world with bigger screen under 4K 30Hz.

Dual Card Slots

The hub support SD card and Micro SD card read and write simultaneously. Transfer speed up to 95 MB/S (UHS-I).

60W Power Delivery

The hub support up to 60W power pass-through, it can charge your device and stabilize all the peripherals you plug in.

Super Speed Transfer

2 x USB 3.0 ports + 1 x USB C data port allow you to connect multiple devices at the same time with transfer speed up to 5Gbps, 10 times faster than USB 2.0.

Wide Compatibility

For New MacBook Air & Pro (With Thunderbolt 3 Ports), MacBook 12, Surface Pro 7/Book 2/Go, Chromebook, Windows laptops, etc.

Product description

Fast Lift to the Jacking Point

Blackhawk B6350 Service Jack is a 3-1/2 ton (7,000 lbs) capacity service jack that features the unique design of fast list technology to fast lift to the jacking point with no load.

It features the swivel saddle that provides you with the easy jack positioning and user safety. Its heavy duty steel construction also provides you the safe use and long term durability.

Blackhawk B6350 Service Jack also features the bypass device that preventing the damage from over pumping.

Blackhawk B6350 Service Jack also features the built-in internal safety valve and vent plug to ensures the safe operation.

- 3½Ton (7,000 Lbs.) Lift Capacity

- Fast Lifting Technology

- Heavy Duty Steel Construction & Swivel Saddle

- Built-In Safty Valve and Bypass Device

Blackhawk B6350 Service Jack is backed by the full one year warranty from the date of the purchase.

Click the buy button now to get your long lasting professional sevice jack

• Built-in internal safety valve and vent plug ensures safe operation
• Swivel saddle provides easy jack positioning and user safety.Saddle Diameter: 4 inch
• 3.5-ton/7,000 lb. lift capacity
• Jack Size: 28 1/2" L x 13 3/4" W x 6 1/2" H
• Rugged universal joint for precise load control
• Great for working in the garage and other outdoor activities such as picnics or ball games
• Note: The hydraulic jack is designed to lift, not to support the object. Immediately after lifting, loads must be supported by a pair of appropriately rated jack stands

User questions & answers

Question:	Hi, Wondering if it will fit my new XtremepowerUS 1/2 Ton Transmission Hydraulic Floor Jack Adapter it has a 1 1/4 inch hole
Answer:	I would say no. The hole in this jack only measures 1 1/8". It would seem your adapter needs an 1 1/4" hole for the "peg" to drop into .
Question:	How high does it lift
Answer:	The lifting range on the jack is 5.5" to 22" H.
Question:	Will this fit under a low profile car like a 350Z
Answer:	It's unlikely. I have a 2006 Mustang GT. If I'm not mistaken, a Mustang has about the same ground clearance as a 350Z. The jack will not fit under my Mustang. It's about an inch or two too tall. It is a great jack in spite of this. I use it on my other vehicle.
Question:	Anyone know of any jack that has this weight capacity, but is made in the USA
Answer:	My Blackhawk B6350 I bought 3 months ago has a made in the USA sticker. For whatever that means. Maybe to sticker was made here!

Product features

Lifting Range: 5.5 inches - 22 inches

• Note: Before it uses, it needs to make sure the release valve needs to be turned clockwise until the firm resistance is felt.
• Note: Since the hydraulic jack is designed to lift, not to support the object. Immediately after lifting, loads must be supported by a pair of appropriately rated jack stands

Product description

Pro lift T-6903D is a 3-ton double locking jack stands. It features a high quality cast ductile Iron Ratchet bar and sturdy stamped steel base provide durability and longevity which makes ideal for home, professional and farm use. Always used in pairs, counter weighted pawls serve as a safe secure locking device to prevent the load from accidental disengagement. An attached pin lock provides support, locking the ratchet bar in place for an additional carrying point. One piece, multi position ductile ratchet bar provides strength and durability as well as a quick adjustment mechanism that securely locks into the desired position.

• Sturdy stamped Steel Construction with 3 ton capacity
• High quality cast ductile iron ratchet bar
• Double locks mechanism with both handle locks and mobility pin
• Height adjustment mechanism allows smooth upward movement while release handle locks and mobility pin
• Meets or exceeds ANSI/PALD standards. Ideal for home, Auto, truck service, farm, and shop use
• Fit type: Universal Fit

User questions & answers

Question:	Where can I buy just the locking pin
Answer:	Max 16 1/2 min 11 inches
Question:	what is the extended maximum height
Answer:	It mounts to the Smittybilt Pivot hinge, so it will clear most aftermarket bumpers as long as they don’t have an integrated tire carrier.
Question:	Does it come with 2 or just one jack
Answer:	No
Question:	What are the max and min lift dimensions
Answer:	I use an insulator for the handle but the mount is very secure and makes little to no noise compared to my old one.

Product features

Pro-Lift Double Pin Jack Stands - 3 Ton

Features:

• Sturdy stamped steel construction
• High quality cast ductile iron ratchet bar
• Height adjustment mechanism allows smooth upward movement while release handle locks into position
• Ideal for auto, truck service, farm and shop use

Product description

Fit Under Low Ground Clearance Vehicle

Pro-Lift F-767 Grey Low Profile Floor Jack is a 2 Ton floor jack that give you better access to low ground clearance vehicle. And,give you the lifting range from 3-1/2 inches to 14 inches.

The Jack can be fit under a clearance of 3-1/2 inches and maneuvered easily into position.

Pro Lift F-767 floor jack also features the heavy duty steel construction that provides the long lasting durability.

Pro Lift unique patented bypass device protects against over pumping. Its built-in safety valve provides overload protection.

- Extra Low Profile

- Lifting Range from 3-1/2 inches to 14 inches

- Patented bypass device protect over pumping

- Built-In Safty Valve Provides overload protection

Pro Lift F-767 floor jack is backed with SFA 90 Days Warranty from the Date of Purchase.

Take one now to access to the areas you never access before.

• Extra low profile
• Lifting range of 3-1/2 inches to 14 inches
• Patented bypass device protects against over pumping for safe operations
• Built-in safety valve provides overload protection. Rust Resistant
• Heavy duty steel construction provides long term durability

User questions & answers

Question:	Does it come with a portable case
Answer:	No, but the box it comes in is pretty sturdy. If you remove the cardboard packing the jack easily slides back into the box. The inside bottom of the box is reinforced. Not sure how long it will hold up, but it’s better than nothing.
Question:	Will this raise a 2011 cadillac cts enough to get jack stands underneath it? i want to change transmission oil ... thanks
Answer:	A Cadillac CTS is roughly 4,300 pounds. Which is a little over the capacity of this jack. As long as you're placing it on jack stands and you don't leave the jack holding it too long, it should be okay. Although all the armchair experts on this site will implore you to buy a 3 or 4 ton jack. Just remember to always put the car on jack stands and do your work on a flat, level surface.
Question:	Can anyone tell me the outside diameter of the lifting cup? Thanks
Answer:	The cup itself is 2 1/4 inches, with the inner portion (The part that spins freely, with the 4 tabs) 1 7/8ths, and the tabs extend about 1/4 inch up from the cup. Hope this helps.
Question:	What kind of oil does this take? The screw was loose when it was shipped to me and some oil had poured out into the box. I just want to top it off
Answer:	hydraulic jack oil. The screw IS loose upon arrival. If you read the SHORT instructions....this (grey) screw is HOW TO LOWER the jack when you are done lifting and have supported the weight/vehicle with jack stands. Turning just a bit using the handle you used to pump up the vehicle - you will notice it lower ever so gently. ONCE it is fully lowered - it is best to immediately turn the screw clockwise until it stops - this prepares the jack for its next use. Do this so you will not forget it is closed. IMO - some people with oil spewing - did not 'get it' how important it is to assure the valve is closed BEFORE raising the vehicle.

Product features

Pro-Lift F-767 Grey Low Profile Floor Jack - 2 Ton Capacity

About Us:

Our ProLift hydraulic automotive jacks, lifts and garage equipment range will cater to many 'do it yourself' enthusiast. The product line includes bottle jacks, floor jacks, garage jacks, aluminum jacks. scissor jack, lawn mower lifts, utility lifts, chokes, dirt bike lift, creepers, mechanic seats and more! Explore our range on the products page.

ProLift has become a global presence in the go to automotive garage maintenance equipment with locations in the United States, The Netherlands, Taiwan and Australia. We create dependable and reliable performance hydraulic equipment.

Product description

Heavy duty blocks are safe and easy to use. They offer many options for leveling single wheels, dual wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks and tandem axles. Customize your levels: Stack interlocking blocks to desired height. Strong and durable blocks are available in a ten block set and a four block build up set. Patented. Each set comes in a convenient storage bag.

• 10 interlocking blocks stack to the desired height for safe and easy leveling
• Strong and durable construction
• Solid bottom to help keep them from sinking in soft ground
• Includes zippered storage bag with handle
• Each leveling block measures 8.5 inch x 8.5 inch x 1 inch

User questions & answers

Question:	How sturdy are these? i have a class b rv that weighs about 9500 lbs dry (only 4 wheels). i used plastic block levelers from campingworld and they broke in their first use
Answer:	This is my second set of these blocks (because I needed more to level on steep incline) only one of the first ten has failed and that's because i did line it up with the jack. My class A Rv weighs 22000 dry they have served me well for 6 months
Question:	What's the difference between Camco 44512 and 44505 models
Answer:	44505 is our leveling blocks. 44512 is our Fasten Leveling Blocks with T-Handle. You can give us a call at 800-334-2004 if we can be of further assistance. Thanks.
Question:	What is the weight limit for these Camco blocks? For the Camco Trileveler it is only 4000 lbs
Answer:	I've used them used under the wheels of some rather large class A motorhomes. What destroys them is if they start to slide when you drive onto them. You have to orient them like a staircase so that you are not attempting to "climb" more than the thickness of "one block per step". Rough, rocky ground can also damage them. In many situations, you'll need more than just 10 blocks. If you really want to be prepared, get 20, or even 30 blocks (two or three 10-pks.) If you use them under the rear of a motorhome that has duals, you need separate "staircases" of blocks for inner/outer wheels, because the blocks are not wide enough to support both inner and outer wheels on the width of a single block.
Question:	What are the dimensions of each block
Answer:	8 1/2 x 8 1/2 x 1 Warning: The 10 answers you will find here all have one thing in common, none of them had a clue but decided to added a few inches here and there. If you can't scroll down the description to find the dimensions, maybe it's time to put your mouse pad away for the winter.

Product features

Interlocking Leveling Blocks

The Camco Leveling Block 10-pack allows you to stack the interlocking blocks to the desired height for safe and easy leveling. These blocks can be used with single wheels, double wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks and tandem axles.

Camco’s RV Leveling Blocks make it easy to customize your levels. Simply stack the interlocking blocks together to your desired height. They have a strong, durable construction and a solid bottom to help keep them from sinking into the ground.

Engineered with a patented design to optimize both strength and weight, resin is UV stabilized and built to last even when exposed to sunlight for extended periods of time. Bright, visible yellow color helps you see them so you don’t leave them behind. They can also be used to help prevent your stabilizers from sinking in soft ground.

Camco's RV Leveling Blocks measure 8.5 inch x 8.5 inch and can be used with stack jacks, trailer tongues, 5th wheel jacks and swing arm supports. If dirt or debris build up in the leveling blocks, just knock it off and hose it out before storage. Product includes a zippered storage bag with handle to keep them all together when not being used.

Easy to drive on and off

Bright yellow blocks are highly visible

Solid bottom resists sinking

Zippered carrying bag fits all 10 blocks

About Camco Manufacturing

Camco proudly manufactures many of our 4,000+ products in 5 facilities across the United States, including items from flagship brands like RhinoFLEX, TastePURE, TST, Currituck, and FasTen.

Product description

Pro lift T-6906D is a 6-ton double locking jack stands. It features a high quality cast ductile Iron Ratchet bar and sturdy stamped steel base provide durability and longevity which makes ideal for home, professional and farm use. Always used in pairs, counter weighted pawls serve as a safe secure locking device to prevent the load from accidental disengagement. An attached pin lock provides support, locking the ratchet bar in place for an additional carrying point. One piece, multi position ductile ratchet bar provides strength and durability as well as a quick adjustment mechanism that securely locks into the desired position.

• Sturdy stamped Steel Construction with 6 ton capacity
• High quality cast ductile iron ratchet bar
• Double locks mechanism with both handle locks and mobility pin
• Height adjustment mechanism allows smooth upward movement while release handle locks and mobility pin
• Meets or exceeds ANSI/PALD standards. Ideal for home, Auto, truck service, farm, and shop use
• Comes with 2 Adjustable Beam and a Single stand;It has both commercial and residential applications

User questions & answers

Question:	Is the pin attached to the back so it doesn't get lost
Answer:	I took some measurements for you. Base weight 8.6 pounds Tongue weight 4.8 pounds Weight per stand 13.4 pounds each Total weight per set of 2 jack stands 26.8 pounds Tongue head contact size 1 inch x 3-31/32 inches Number of notches in tongue 11 Distance between notches in tongue: 3/4 inch steps Base stand dimensions 9 inches x 10-3/8 inches All height measurements are from floor to lowest U shaped contact point in tongue head (true resting point) Minimum lift height tongue base resting on floor: 14-3/16 inches Minimum height to first notch (non locking): 15-7/16 inches Minimum height to first locking notch: 16-1/8 inches Maximum lift height (locking) 22-7/8 inches. Note the lift is a little higher if you add the top of the saddle points, that is if the object is not resting in the U shaped saddle but at the top of the crown-ridges Weld quality-good/acceptable box and packing o.k. capacity as stated in literature: 6 tons per pair Country of manufacture: China Based on the above, I bought a second set, as I liked the first set.
Question:	Are these 6 tons each or 2 three ton stands that equal 6 tons
Answer:	Lifting range is 6-3/8" to 22".
Question:	How high they can extend and hold
Answer:	china
Question:	Please add some more info to your listing. What's the minimum and maximum clearance? What are the dimensions on the heads? Base
Answer:	These jacks will hold 3 tons or 6,000 pounds. Since you won’t be holding the entire weight of your vehicle you should be fine. These are great light weight jacks for tire changes and auto maintenance too.

Product features

Pro-LifT Double Pin Jack

Pin style jack stands offer the ultimate in security and safety. All Black-hawk Automotive pin style stands are offer some of the best values on the market today.

• Sturdy stamped steel construction
• Height adjustment mechanism allows smooth upward movement while release handle locks into position
• Ideal for auto, truck service, farm, and shop use

Product description

The Torin BIG RED T10152 steel scissor lift jack car kit is a collapsible, compact jack can be used as a rugged replacement jack or as an extra utility jack that can be stored in the trunk of your car. Engineered using a drop forged alloyed steel construction for quality and durability and features a lifting range of 4-1/8" to 15-1/8" with a 1.5 ton (3,000 lb) capacity. It's equipped with an extra-wide base which adds stability and strength. The 1 piece handle delivers on-the-spot quick response and speed to get the job done quickly and safely. This unit is 100% factory tested for reliability and safety to meet and comply with ANSI/ASME PASE safety standards. Includes a limited 1 year manufacturer warranty.

• Collapsible, steel scissor lift jack has a compact design that can be used as a rugged replacement jack or as an extra utility jack that can be stored in the trunk of your car
• Features a lifting range of 4-1/8" to 15-1/8" with a 1.5 ton (3,000 lb) capacity
• Engineered using a drop forged alloyed steel construction for quality and durability
• Equipped with an extra-wide base which adds stability and strength; 1 piece handle delivers on-the-spot quick response and speed
• Meets ANSI/ASME PASE safety standards and includes a limited 1 year manufacturer warranty

User questions & answers

Question:	Can you tell me the width of the base on this jack? Thanks. RMW
Answer:	The base is 6&1/2" wide, is 4&1/2" deep at the ends, but narrower at the middle. Realize that made-in-China items can quickly change depending on their latest vendor, i.e., low-bidder. I'm happy with mine, although the picture for mine showed it had a flat top, and mine has two small bumps that protrude--although only a very little bit. These might provide stability in some situations, don't pose a problem in most, but I'd have peferred that the top be flat.
Question:	what is the fully collapsed height -- will it fit within a gap of 3-3/4 inches
Answer:	Yes. It will clear that distance. Its collapsed height is 3 1/2 inches.
Question:	Can you tell me about the length of the jack when it closed , I want to see if it match it's place in my car ( Toyota Camry
Answer:	When completely closed, as flat as can be, this item measures 5" high, 5" wide and 18" long.
Question:	Will this jack for toyota corolla le 2009 model
Answer:	I'm sure it will work for the 2009 Toyota Corolla. The limit on the Jack is 3,000 pounds. This jack should easily lift the weight from one side or one corner. Be sure the jack is firmly under a frame member. I would recommend a Jack stand or blocks to place under the frame in the event of a mishap.

Product features

Torin BIG RED Steel Scissor Lift Jack Car Kit, 1.5 Ton (3,000 lb) Capacity

Product description

Camco RV 20' Sidewinder Plastic Sewer Hose Support is sturdy and lightweight. Plastic support with strong snap fit hinges has deep cradles to hold sewer hose in place without straps. No staples to rust. Easily positions around obstacles and stays where you put it. Won’t creep closed. Convenient handle makes storage even easier. The bottom of the Sidewinder cradle is 7 1/4" high at its highest point and 4" high at its lowest point. Patented.

• The ultimate protection and support for your sewer hose: The 20 feet Sidewinder RV Sewer Hose Support by Camco lifts and cradles your sewer hose while in connection from your RV to the dump station. It keeps your sewer hose off the ground and prevents potential damage or punctures to your RV or camper sewer hose by safely nesting it in heavy duty plastic
• Hassle free preparation and setup: Conveniently ready to use straight of the box with no assembly required. Comes complete with winding sidewinder RV sewer hose support, and orange custom fit storage handle that clasps on to your compressed Sidewinder for simple toting and handling
• Lightweight yet durable and sturdy frame: This all plastic design, creates a lightweight and weatherproof product made to last long. It is constructed with a rust and corrosion resistant plastic material that is durable enough to carry your hose over the roughest terrains
• Designed for simplicity and reliability – Designed with deep cradles and grooves that will secure your sewer hose in place without having to use frustrating straps. Once sewer hose support is extended to the desired length, will remain in place without creeping closed. Flexible design allows this support to curve around and avoid obstacles with ease. Easy to clean, just hose it off and let air dry. Compatible with all standard 3” diameter sewer hoses
• Increased sewer hose drainage –Angled to help in drain sewer hose contents, it is 7.25” at its highest point and 4” at its lowest. Each cradle, slightly decreases in height, creating a gentle downward slope as your hose gets closer to the septic connection, ensuring better drainage in comparison to a non angled surface

User questions & answers

Question:	How to remove coupon
Answer:	I would think it would work, unless you are running up hill.
Question:	If you have a 15' hose do you need the 10' support or the 15' support? It seems like you wouldn't really need as long of a support as your hose is
Answer:	The 10' will work
Question:	Will a 10' hose stay on the 20' supoort? any issues with doing this
Answer:	Sure. It opens up to the full 20 ft. If you need it but you can extend it less to hold a 10 footer.
Question:	Are the heights of each one adjustable
Answer:	Each section is slightly lower than the section before it, creating a gentle slope. Each individual section is not independently adjustable however.

Product features

The 20ft Sidewinder RV Sewer Hose Support by Camco

Camco 20 feet Sidewinder Plastic RV Sewer Hose Support keeps everything flowing smoothly to the dump station. The Sidewinder is sturdy and lightweight. The plastic support system has strong interlocked hinges and deep cradles to hold the sewer hose in place without straps. The Sidewinder easily stretches out without creeping closed and positions around obstacles to stay where you put it. The convenient handle makes storage and transportation even easier. The bottom of the Sidewinder cradle is 7-1/4 inches high at its highest point and 4 inches high at its lowest point. It extends to fit a 20-foot hose and compresses to just 12-1/2 inches.

How it works

Remove the orange handle from the Sidewinder and extend Sidewinder to the desired length. Position between your RV and the sewer inlet with the highest end at the RV and the lowest end at the sewer inlet. Lay the sewer hose into the cradle of the Sidewinder and then hook up the sewer hose as you normally would. When complete, Collapse the Sidewinder and use the handle to secure it closed.

Simple Collapsible Structure with Convenient Carrying Handle

The sidewinder sewer hose comes with a reliable carrying handle for simple toting and storage after each use. Collapses to 12.5 inches for easy storage.

Lightweight and Durable Build with a Downward Slope for Easier Drainage

Angled to help in drain sewer hose contents, it is 7.25” at its highest point and 4” at its lowest. Each cradle, slightly decreases in height, creating a gentle downward slope as your hose gets closer to the septic connection ensuring better drainage in comparison to a non-angled surface.

Strong Interlocked Hinges with Deep Cradles For Reliability

Designed with deep cradles and grooves that will secure your sewer hose in place without having to use frustrating straps. Once sewer hose support is extended to desired length, will remain in place without creeping closed.

Bendable Design Easily Avoids Obstacles and Stretches Extended Lengths

Flexible design allows this support to curve around and avoid obstacles with ease.

About Camco Manufacturing

Camco started in 1966 with one employee and one product. Today, over 40 years later, we have more than 350 employees, over 3,000 products and multiple manufacturing facilities in the USA and across the globe.

Competitive pricing, superior service, quality products and customer satisfaction are the foundations upon which Camco operates. Our friendly, knowledgeable customer service staff stands ready to assist our customers with any questions. At Camco, we take pride in meeting the ever changing demands of a challenging marketplace while serving you, our most valuable asset.

• [HEAVY DUTY]- Heavy duty steel frame provides stability and reliability when in use
• [LARGE BASE]- With a 10" x 10" base dimension you can rest easy there won't be any movement of the jack while in use under your vehicle
• [LIFTING RANGE] - Minimum Height: 13-3/10" (338mm) & Maximum Height: 19-7/10" (500mm)
• [HOLDING PINS] - Heavy duty holding pins for adjustable heights
• [WARRANTY] - Covered by a 2 years warranty that covers materials and workmanship

User questions & answers

Question:	What is the minimum height of stand without extension
Answer:	read ad 13" min i dont know why u would use with out extent. 10 1/2 inch just the base
Question:	How tall are these without the pin and at the first setting
Answer:	11.5” in the middle and 11.75” higher edges of the v shape
Question:	How many pin holes, and what is the distance between the pin holes
Answer:	4 pin holes about an 1 and 1/4 inch
Question:	Are these 22 ton each or 22 ton a pair
Answer:	Each jack stand is rated for 22 tons.

Product features

Dimensions

• 10" X 10" Base providing a large base to ensure stability and ease of use
• Heavy duty steel frame provides that piece of mind and reliability in any situation

Piece of Mind

• Work with a HIGH level of confidence knowing this heavy duty steel stand will hold.
• Robust but easy to move
• Makes other jack stands seem like toothpicks ready to break

Versatile

• Can be used for cars, trucks and even large heavier trailers
• Great for agriculture, industrial and construction environments
• Could support equipment in fleet garage

Adjustable Height Positions

• 13 3/10" to 19 7/10" Height Adjustments for any level of use
• Heavy Duty Holding Pins ensure safety when height adjusted upward

• HEAVY DUTY FLOOR JACK - Premium quality, durable high-carbon steel floor jack. Coated to prevent corrosion. Self-centering plates (size: 4” x 5” x 0.82” minimum thickness) constructed to mitigate movement and prevent dishing.
• ADJUSTABLE FLOOR JACK DESIGNED FOR A CUSTOM FIT - This all-in-one jack stand is easy to assemble and install. All moving parts fit snugly to avoid lateral displacement, and the top and bottom plates are deeply embossed to mitigate movement and prevent dishing.
• SAFE - Akron floor jacks are fully adjustable and come with a double carriage lock for added strength and safety.
• TEMPORARY OR SECONDARY SUPPORT - Perfect temporary or additional support for primary areas such as stairs, porches, decks, crawl spaces and heavy load areas. This service jack can also be used permanently as a secondary support.
• SPECIFICATIONS - Size Range: 1'-1' 3", Weight: 8 lbs., Unit Cube: 0.2, Compression Load Range: up to 18,000 lbs.

User questions & answers

Question:	What is the max extension of the c-4? Looks like it extends only 3". Am i reading this right
Answer:	Yes. The extension is 3". I used these to level our mobile home....saved me HUNDREDS of dollars and I got it done correctly. This jack supports 18000 pounds. As an engineer, I appreciate how this jack is made and how WELL it is made
Question:	What is the manufacturer's maximum recommended working load for one jack
Answer:	Max-18,000 lbs- more info at website www.akronproducts.com. Hope this helps
Question:	how far do these expand
Answer:	On the akron website and on the c-4 adjustable floor jack box itself it says the range is lowest 12" to 15" highest. I see comments that say it has a 6" range but that would not be correct for this jack and if installed to that extension would probably not be safe. That said akron does sell a large variety of adjustable floor jacks with a range of extensions. I bought this one because I had a space of about 13" that needed to go up only slightly to level out the floor.
Question:	How does one "jack them up?" Can I extend these until they touch the beams under my fifth wheel and then jack them up to hold my slid out up
Answer:	Yes, you turn the collar on the top of the shaft-it is threaded-to raise or lower the top plate.