13 best 6 ton jacks

Product description

Pro lift T-6906D is a 6-ton double locking jack stands. It features a high quality cast ductile Iron Ratchet bar and sturdy stamped steel base provide durability and longevity which makes ideal for home, professional and farm use. Always used in pairs, counter weighted pawls serve as a safe secure locking device to prevent the load from accidental disengagement. An attached pin lock provides support, locking the ratchet bar in place for an additional carrying point. One piece, multi position ductile ratchet bar provides strength and durability as well as a quick adjustment mechanism that securely locks into the desired position.

• Sturdy stamped Steel Construction with 6 ton capacity
• High quality cast ductile iron ratchet bar
• Double locks mechanism with both handle locks and mobility pin
• Height adjustment mechanism allows smooth upward movement while release handle locks and mobility pin
• Meets or exceeds ANSI/PALD standards. Ideal for home, Auto, truck service, farm, and shop use
• Comes with 2 Adjustable Beam and a Single stand;It has both commercial and residential applications

User questions & answers

Question:	Is the pin attached to the back so it doesn't get lost
Answer:	I took some measurements for you. Base weight 8.6 pounds Tongue weight 4.8 pounds Weight per stand 13.4 pounds each Total weight per set of 2 jack stands 26.8 pounds Tongue head contact size 1 inch x 3-31/32 inches Number of notches in tongue 11 Distance between notches in tongue: 3/4 inch steps Base stand dimensions 9 inches x 10-3/8 inches All height measurements are from floor to lowest U shaped contact point in tongue head (true resting point) Minimum lift height tongue base resting on floor: 14-3/16 inches Minimum height to first notch (non locking): 15-7/16 inches Minimum height to first locking notch: 16-1/8 inches Maximum lift height (locking) 22-7/8 inches. Note the lift is a little higher if you add the top of the saddle points, that is if the object is not resting in the U shaped saddle but at the top of the crown-ridges Weld quality-good/acceptable box and packing o.k. capacity as stated in literature: 6 tons per pair Country of manufacture: China Based on the above, I bought a second set, as I liked the first set.
Question:	Are these 6 tons each or 2 three ton stands that equal 6 tons
Answer:	Lifting range is 6-3/8" to 22".
Question:	How high they can extend and hold
Answer:	china
Question:	Please add some more info to your listing. What's the minimum and maximum clearance? What are the dimensions on the heads? Base
Answer:	These jacks will hold 3 tons or 6,000 pounds. Since you won’t be holding the entire weight of your vehicle you should be fine. These are great light weight jacks for tire changes and auto maintenance too.

Product features

Pro-LifT Double Pin Jack

Pin style jack stands offer the ultimate in security and safety. All Black-hawk Automotive pin style stands are offer some of the best values on the market today.

• Sturdy stamped steel construction
• Height adjustment mechanism allows smooth upward movement while release handle locks into position
• Ideal for auto, truck service, farm, and shop use

Product description

The Torin BIG RED T46002A steel double locking jack stands are a must have necessity in any garage. Handles a wide range of vehicles including small cars, jeeps, ATV's, UTV's, and more. It's constructed of high-grade steel with a welded frame for quality and long term durability. Features a lifting range of 15-3/8" to 23-13/16" with a 6 ton (12,000 lb) load capacity. Each stand is equipped with a removable locking support pin designed and dedicated to keeping you safe and increases safety by 200%. Multi-position forged iron ratchet bar has a sawtooth design, allowing for quick height adjustments that lock into place. The saddle has a large surface area that provides better contact with the load being supported. Wide pyramid style foot base provides added strength; Large foot base delivers additional stability and measures 7-11/16" x 6-7/8". Meets ASME safety standards and includes a limited 1 year manufacturer warranty.

• Double locking jack stands help support vehicles after lifting with a jack; Handles a wide range of vehicles including small cars, jeeps, ATV's, UTV's, and more
• Features a lifting range of 15-3/8" to 23-13/16" with a 6 ton (12,000 lb) load capacity; Saddle has a large surface area that provides better contact with the load being supported
• Constructed with heavy-duty steel and is industrial welded for quality and long term durability; Removable locking support pin provides added security that increases safety by 200%
• Wide pyramid style foot base provides added strength; Large foot base delivers additional stability and measures 7-11/16" x 6-7/8"
• Multi-position forged iron ratchet bar has a sawtooth design, allowing for quick height adjustments that lock into place; Meets ASME safety standards and includes a limited 1 year manufacturer warranty

User questions & answers

Question:	How much does a single jack hold? 3000 lbs? Or is it 3000 lbs per pair
Answer:	These jacks are rated for 3 tons for the pair, meaning evenly distributed across two jack stands (the pair). This means that the load placed on the PAIR should not exceed 3 tons. Using 4 stands to lift a 4 corners of a vehicle is not recommended and the pair should be used for both sides of the front or both sides of the rear, not to be used for lifting a single side of the vehicle at the front and rear point. Whether a single stand or a pair of stands, the rated capacity is a 3 ton, balanced and centered load. The regulations, at least as it relates to the US, are quite specific on this.
Question:	What are the min and max height for these please? What are the base outside dimensions please? Thanks
Answer:	Base dimensions = 6.5" x 7.25" Min height = 11.5" Max height = 16"
Question:	Anyone know the difference t43002 and t43002a? the former is $10 cheaper, but description identical to this one
Answer:	The difference is the locking pin. A number of jack stands, sold under various brand names, were recently recalled for being unsafe. If I am correct, the recalled models did not have the safety locking pin feature, found on this jack stand. After returning my recalled, unsafe, stands, I purchased these because they had the locking pin. I would suggest that one avoid any jack stand without the extra locking pin. The few extra dollars is well worth the added safety.
Question:	how high do they go
Answer:	Im not sure of the Max height but they go high enough to list a suburban and get wheels off. I just used them this weekend for brake job. I would do a search in google to find the max height, they also make some stands that are meant for SUVs which go higher. If you need to get a transmission out or something like that these wont go high enough.

Product features

Torin BIG RED Steel Jack Stands: Double Locking, 6 Ton (12,000 lb) Capacity, Red, 1 Pair

Product description

Fast Lift to the Jacking Point

Blackhawk B6350 Service Jack is a 3-1/2 ton (7,000 lbs) capacity service jack that features the unique design of fast list technology to fast lift to the jacking point with no load.

It features the swivel saddle that provides you with the easy jack positioning and user safety. Its heavy duty steel construction also provides you the safe use and long term durability.

Blackhawk B6350 Service Jack also features the bypass device that preventing the damage from over pumping.

Blackhawk B6350 Service Jack also features the built-in internal safety valve and vent plug to ensures the safe operation.

- 3½Ton (7,000 Lbs.) Lift Capacity

- Fast Lifting Technology

- Heavy Duty Steel Construction & Swivel Saddle

- Built-In Safty Valve and Bypass Device

Blackhawk B6350 Service Jack is backed by the full one year warranty from the date of the purchase.

Click the buy button now to get your long lasting professional sevice jack

• Built-in internal safety valve and vent plug ensures safe operation
• Swivel saddle provides easy jack positioning and user safety.Saddle Diameter: 4 inch
• 3.5-ton/7,000 lb. lift capacity
• Jack Size: 28 1/2" L x 13 3/4" W x 6 1/2" H
• Rugged universal joint for precise load control
• Great for working in the garage and other outdoor activities such as picnics or ball games
• Note: The hydraulic jack is designed to lift, not to support the object. Immediately after lifting, loads must be supported by a pair of appropriately rated jack stands

User questions & answers

Question:	Hi, Wondering if it will fit my new XtremepowerUS 1/2 Ton Transmission Hydraulic Floor Jack Adapter it has a 1 1/4 inch hole
Answer:	I would say no. The hole in this jack only measures 1 1/8". It would seem your adapter needs an 1 1/4" hole for the "peg" to drop into .
Question:	How high does it lift
Answer:	The lifting range on the jack is 5.5" to 22" H.
Question:	Will this fit under a low profile car like a 350Z
Answer:	It's unlikely. I have a 2006 Mustang GT. If I'm not mistaken, a Mustang has about the same ground clearance as a 350Z. The jack will not fit under my Mustang. It's about an inch or two too tall. It is a great jack in spite of this. I use it on my other vehicle.
Question:	Anyone know of any jack that has this weight capacity, but is made in the USA
Answer:	My Blackhawk B6350 I bought 3 months ago has a made in the USA sticker. For whatever that means. Maybe to sticker was made here!

Product features

Lifting Range: 5.5 inches - 22 inches

• Note: Before it uses, it needs to make sure the release valve needs to be turned clockwise until the firm resistance is felt.
• Note: Since the hydraulic jack is designed to lift, not to support the object. Immediately after lifting, loads must be supported by a pair of appropriately rated jack stands

Product description

Great Addition to any Garage and Home

Pro-Lift B-006D Grey Hydraulic Bottle Jack is a 6-ton bottle jack that is ideal for auto, truck service, farm and shop use. With the heat treated critical stress areas, it ensures long life performance. In addition, the carrying handle makes it so easy to carry around wherever need it.

It features the steel lifting saddle that is engineered to hold load securely.

With the extension screw, it allows Pro Lift B-006D Bottle Jack to be adjusted to accommodate desired work height.

Pro Lift B-006D Bottle Jack also features Built-In bypass system to protect against ram over-travel.

- Steel Lifting Saddle Engineered to Hold Load Securely 

- Extension Screw Adjusts to Accommodate Desired Work Height 

- Built-In Bypass System to Protect against Ram Over-Travel 

- Heat Treated Critical Stress Areas 

- Designed to Meet the Latest ANSI/PALD Standards

Specifications

- Capacity: 6 Ton 

- Lifting Range: 8-1/2 x 16-1/4 inch 

- Carrying Handle: No 

- Item Weight: 12 Lbs

Pro Lift B-006D Bottle Jack is backed with SFA 90 Days Warranty from the Date of Purchase.

Grab one now to add to your home tool set

• The product is 6Ton bottle jack
• Easy and simple use kit
• The product is manufactured in china
• Steel lifting saddle engineered to hold load securely
• Extension screw adjusts to accommodate desired work height
• Built-in bypass system protects against ram over travel
• Heat treated critical stress areas ensure long life performance
• Designed to meet ANSI/PALD standards

User questions & answers

Question:	Will this work with a 2016 Tesla Model S-85, vehicle weight ~4700 lbs
Answer:	I'm sure it would lift the car if there is enough clearance to put the jack under it.
Question:	What is the total amount of lift from fully compressed to fully extended? How long is the handle
Answer:	I have the 12 ton model. The hydraulic ram extends a maximum of 8.5 inches. The screw extension lets you extend the reach about 7 inches but the lift is still 8.5 inches. The handle is very short. I had to make an 18 inch extension out of 3/4 inch electrical conduit so that I could get under my Sequoia to lift the axle to change a tire. Otherwise it works fine and I am satisfied with it.
Question:	Is this the exact same jack as sold in Harbor Freight (just under different labeling)? It looks the same
Answer:	I’m the proud owner of 3 of these so called “junk” harbor freight bottle jacks and they work perfectly. Yes some of the products they sell are crappy but I’ve had a few of them for 7 or 8 years and would recommend them to anyone👍🏻
Question:	Pro-lif b-006d grey hydraulic bottle jack - 6 ton can be used for any truck like tundra and chevy or any suggestion please
Answer:	Certainly a durable bottle jack, because of ground to axle height, you may need to include Block of wood. Overall the bottle jack is good choice. You should not have any problems..

Product description

The Torin BIG RED T90603B hydraulic bottle jack is designed for residential and commercial use. It is industrial welded and engineered using a drop forged alloyed steel construction that is ideal for quality and durability. The inner/outer welded structure and steel construction will keep your bottle jack leak-free and give it an overall stronger build. The fully welded structure is designed for hard-hitting commercial use, making large loads easy to lift. A wide, rugged base adds stability and strength. The lifting range is 8-1/2" to 16-1/4" with a 6 ton (12,000 lb) capacity. It features a high-quality glide-action pressure pump designed to lift with minimal muscle and effort and has an integrated built-in oil-bypass and overload valve that protects the hydraulic system from extending beyond its travel limits. Hydraulics are powered with a high-quality oil, which offers better corrosion resistance and high/low temperature flexibility, allowing the unit to operate at temperatures between 40 degrees Fahrenheit and 105 degrees Fahrenheit. Piston ram utilizes a Y-style polyurethane sealing ring with backup ring, preventing the load from falling slowly. This powerful bottle jack is ideal for lifting cars, trucks, SUVs, farm vehicles, heavy-duty machinery and industrial equipment. It can also be used for military applications, agricultural and industrial environments where the equipment receives heavier abuse. This unit is 100% factory tested for reliability and safety to meet and comply with ASME PASE safety standards. Includes a limited 1 year manufacturer warranty.

• Hydraulic bottle jack designed for residential and commercial use; Serrated, heat treated saddle provides generous lifting area and secure grip
• Features a lifting range of 8-1/2" to 16-1/4" with a 6 ton (12,000 lb) capacity; Adjustable screw top extension adds versatility
• Engineered using a drop forged alloyed steel construction for quality and durability; Inner/outer welded structure delivers leak-free performance
• Glide-action pressure pump is designed to lift with minimal effort; Integrated built-in oil-bypass and overload valve that protects the hydraulic system from extending beyond limits
• Meets ASME PASE safety standards and includes a limited 1 year manufacturer warranty

User questions & answers

Question:	Jack won't come down
Answer:	same problem here. 20 ton. returned one, and new replacement does the same thing. over 100lbs of pressure and still no lower. must stand on... which is effing hard when in a crawlspace.. hard to remove from area jacked up also, because wont lower.
Question:	How tall is this jack when all the way down? I need to get it under 9" high car frame
Answer:	The jack is less then a foot high but it probably at least nine inches. I keep it in the back of my jeep and haven't measured it. If I get a chance I'll do it later and respond again.
Question:	Is there a way to immediately let the whole thing reset (go down to its non pumped height
Answer:	Neighbor ... sounds like you are a newbie. We were all that, once. The handle fits over the operating valve and piston action depends on whether it is open or not. Twist clockwise to close and pump .... the piston goes up. Twist counterclockwise to open and the piston retracts .... if, there is sufficient weight on it or it has a spring to retract the piston. The large screw in the top is manually adjusted out or in. Please remember that this unit isn't reliable enough for you to get under the car after you have lifted it. Jack stands are needed and you must be certain that the car cannot move. That means emergency brake set and wheel chocks are needed. Sorry if I got too specific or described things you already knew. Just tryin' to be a good neighbor .... ron :-)
Question:	What is the diameter of the ram
Answer:	The top of the ram IS 1.084", (NOT 1 and 1/8 inches). The cylinder raising that top IS 1.1 inches (NOT slightly wider at 1.25 inches). The base of the unit is roughly IS 3.7" x 3.85 " (NOT 3.5" x 4.5") and IS approximately 7" (NOT 9") tall before raising ram.

Product features

Torin BIG RED Hydraulic Welded Bottle Jack, 6 Ton (12,000 lb) Capacity

Handle Tool

Includes pump handle with plastic sheaths

Steel Construction

Engineered using a drop forged alloyed steel construction for quality and durability. Inner/outer welded structure delivers leak-free performance

Glide-Action Pump

Features a high-quality, glide-action pressure pump designed to lift with minimal effort

Serrated Saddle

Serrated, heat treated steel saddle provides a generous lifting area and a secure grip

• Safely lifts and holds unibody and body-on-frame vehicles, 3 ton capacity
• Combines jack stand and Hydraulic bottle jack in one unit, eliminating need for separate jack stand
• Height range: 11 inch to 21 inch
• Designed to safely Lift and hold both Regular and unibody cars and trucks
• Highly durable
• Safely lifts and holds Unibody and body-on-frame vehicles
• Combines jack stand and hydraulic bottle jack in one unit, eliminating need for separate jack stand
• Safety bar locks the unit desired height

User questions & answers

Question:	Will this work on a 2012 Toyota corolla
Answer:	The 6000 will need 11.25 inches of clearance to get to the lifting point. I suspect your jeep wrangler Sahara has that, but best to measure to see if you have that clearance. BTW, the lifting height of the 6000 is 11.25 to 17.5 inches.
Question:	What is the stroke length of the bottle jack on the 4000 lb model
Answer:	It's very good, lt will work on 2016 hrv
Question:	Which jack should I get for my 2017 jeep wrangler Sahara the 4000 or the
Answer:	Yes, I've tried several different flavors of the ALO brand, and they all contain pieces of aloe pulp (same consistency across each flavor, they just absorb the flavor of the beverage). Compared to another less-expensive brands (Aldi, Dollar General), this contains more aloe (and tastes better in my opinion).
Question:	Will it work on 2016 honda hrv
Answer:	If I had to rate how much it would be 30% percent but a small delicious amount very smooth

Product features

Powerbuilt 6000 Lb. Unijack Bottle Jack & Jackstand in One

The Powerbuilt Unijack is designed to safely lift and hold both regular and unibody cars and trucks.

All Unibody vehicles have factory-approved lifting points to prevent damage when jacking up the vehicle. But with a conventional jack, it’s challenging to properly lift and hold a unibody vehicle, because once the vehicle is raised with a jack, there’s no space left to add a jackstand.

The Powerbuilt Unijack solves this problem with an ingenious design that both safely lifts and securely holds a Unibody vehicle using a single lift point. The Unijack offers both concave and flat lifting surfaces to accommodate a wide variety of lift points.

What’s more, Unijack eliminates the cost and hassle of a floor jack, it’s easier to lift, move and store and costs a lot less too.

The 6000 pound Unijack offers lift range from 11 to 21 inches, which makes it perfect for trucks, SUVs and vans.

Product description

Great Addition to any Garage and Home

Pro-Lift B-S12D Grey Hydraulic Bottle Jack is a 30 ton bottle jack that is ideal for auto, truck service, farm and shop use. With the heat treated critical stress areas, it ensures long life performance. In addition, the carrying handle makes it so easy to carry around wherever need it.

It features the steel lifting saddle that is engineered to hold load securely.

With the extension screw, it allows Pro Lift B-S12D Bottle Jack to be adjusted to accommodate desired work height.

Pro Lift B-S12D Bottle Jack also features Built-In bypass system to protect against ram over-travel.

- Steel Lifting Saddle Engineered to Hold Load Securely

- Extension Screw Adjusts to Accommodate Desired Work Height

- Built-In Bypass System to Protect against Ram Over-Travel

- Heat Treated Critical Stress Areas

- Designed to Meet the Latest ANSI/PALD Standards

Specifications

- Capacity: 12 Ton Shorty

- Lifting Range: 6 x 10-5/8 inch

- Carrying Handle: Yes

- Item Weight: 14 Lbs

Pro Lift B-S12D Bottle Jack is backed with SFA 90 Days Warranty from the Date of Purchase.

Grab one now to add to your home tool set

• Steel lifting saddle engineered to hold load securely
• Extension screw adjusts to accommodate desired work height
• Built-in bypass system protects against ram over travel
• Heat treated critical stress areas ensure long life performance
• Designed to meet ANSI/PALD standards

User questions & answers

Question:	What is the ram diameter or top diameter of screw top where it lifts
Answer:	The ram-bore is 1-5/8", and the FOOT on top is 1-1/2" at the adjustable screw top.
Question:	Will this fit under a 2015 Charger for a tire change
Answer:	Good question, it may, only because the charger sits lower to the ground than, my '97 Jeep grand Cherokee Laredo, remember you should take in consideration of the tire size your Charger uses, does the tires lift the car higher off the ground, if not than it should fit
Question:	Is it America made
Answer:	No.
Question:	what is the total height of this jack before extending? relaxed
Answer:	The jack is 6" tall before extending, and it is not junk, I lift my 34ft fifth wheel trailor one wheel at a time and it stays up.

Product features

Pro-LifT B-S12D Grey Hydraulic Bottle Jack - 12 Ton Capacity

• Steel lifting saddle cleated for load gripping power
• Extension screw adjusts to accommodate work height
• Patented bypass device protects against over-pumping
• Heat treated critical stress areas ensure long life performance
• Carrying handle
• Ideal for auto, truck service, farm, and shop use

Product description

The Torin BIG RED TA92006 air hydraulic bottle jack is ideal for lifting heavy-duty machinery, industrial construction equipment, farm vehicles, and more. Constructed of heavy-duty steel, it's designed for operating either manually or pneumatically. It features a lifting range between 10-7/16" to 20-1/16" with a 20 ton (40,000 lb) load capacity. The Torin BIG RED TA92006 has an air pressure range of 100 to 175 PSI (note: a minimum of 110 PSI air pressure is required to raise rated capacity load). Equipped with an automatic dual spring controlled lowering system, fully polished and chromed cylinder rams enhanced with high-performance seals, and a push-button trigger control which increases speed and efficiency, reducing lift time. The Torin BIG RED air hydraulic bottle jack is also fitted with safety valve to prevent overloading. Welded handle grip makes this bottle jack easy to move and position. Manufactured with precision for quality and performance. Meets ASME PASE standards. Includes a limited 1 year manufacturer warranty.

• Air hydraulic bottle jack is ideal for lifting heavy-duty machinery, industrial construction equipment, farm vehicles, and more; Wide, rugged base adds stability and strength
• Features a lifting range between 10-7/16" to 20-1/16" with a 20 ton (40,000 lb) load capacity; Designed for operating either manually or pneumatically
• Automatic dual spring controlled lowering system; Fully polished and chromed cylinder rams enhanced with high-performance seals
• Has an air pressure range of 100 to 175 PSI; Push-button trigger control increases speed and efficiency, reducing lift time
• Fitted with safety valve to prevent overloading; Meets ASME PASE standards and includes a limited 1 year manufacturer warranty

User questions & answers

Question:	can this work upside down. I want to make a press with it
Answer:	I have a similar jack used as the power ram for a press. I mounted it right side up and let the ram push against the top bar of the press frame and let the body of the jack rest on the movable press part. If you search for "hydraulic press" and get pictures of the smaller "home shop" style presses, you can see many that are set up that way. Mine works really well. Keeps the cost down because you can use an inexpensive bottle jack like this one rather than a purpose built hydraulic ram made to work inverted.
Question:	Could I air up this jack with my on board compressor rated for 150 psi tank for air bags
Answer:	possibly. depends on your CFM
Question:	Is (max) air pressure 175 psi as described
Answer:	My shop air is set at 175psi and I've had no problems with it. As anything I wouldn't exceed the (max) limit for safety reasons anyway. I own two of the jacks and use them daily lifting heavy equipment. By far some of the best jacks I've ever used and at a very good price.
Question:	what is the difference in the 20 ton and 12 ton version
Answer:	About 8 tons

Product features

Torin BIG RED Pneumatic Air Hydraulic Bottle Jack with Manual Hand Pump, 20 Ton (40,000 lb) Capacity

Product description

The Torin TCE AT90603BU hydraulic bottle jack is designed for residential and commercial use. It is industrial welded and engineered using a drop forged alloyed steel construction that is ideal for quality and durability. The inner/outer welded structure delivers leak-free performance and has a longer operation life and an overall stronger build compared with traditional screw jacks. The fully welded structure is designed for hard-hitting commercial use, making large loads easy to lift. A wide, rugged base adds stability and strength. Features a lifting range of 8-1/4" to 15-15/16" with a 6 ton (12,000 lb) capacity. It has a lifting height of 4-15/16" and an adjustable screw top extension that adds an additional height of 2-3/4". The high-quality, glide-action pressure pump designed to lift with minimal muscle and effort and has an integrated built-in oil-bypass and overload valve that protects the hydraulic system from extending beyond its travel limits. Hydraulics are powered with a high-quality oil, which offers better corrosion resistance and high/low temperature flexibility, allowing the unit to operate at temperatures between 40 degrees Fahrenheit and 105 degrees Fahrenheit. Piston ram utilizes a Y-style polyurethane sealing ring with backup ring, preventing the load from falling slowly. This powerful bottle jack is ideal for lifting cars, trucks, SUVs, farm vehicles, heavy-duty machinery and industrial equipment. It can also be used for military applications, agricultural and industrial environments where the equipment receives heavier abuse. This unit is 100% factory tested for reliability and safety to meet and comply with ASME PASE safety standards. Includes a limited 2 year manufacturer warranty.

• Hydraulic bottle jack designed for residential and commercial use that can be widely used for cars, trucks, and SUV's; Serrated, heat treated saddle provides generous lifting area and secure grip
• Features a lifting range of 8-1/4" to 15-15/16" with a 6 ton (12,000 lb) capacity; Has a lifting height of 4-15/16" and an adjustable screw top extension that adds an additional height of 2-3/4"
• Engineered using a drop forged alloyed steel construction for quality and durability; Inner/outer welded structure delivers leak-free performance and has a longer operation life and an overall stronger build compared with traditional screw jacks
• Glide-action pressure pump is designed to lift with minimal effort; Integrated built-in oil-bypass and overload valve that protects the hydraulic system from extending beyond limits
• Meets ASME PASE safety standards and includes a limited 2 year manufacturer warranty

User questions & answers

Question:	Sirve para Honda crv
Answer:	No es de buena calidad
Question:	What country is this made
Answer:	China
Question:	Is it made in China
Answer:	Yes, it was made in China.
Question:	What size is the threaded screw on the top? I need to b able to take it out and replace it with another type
Answer:	the diameter of the threaded screw on the top is 45/64“ (18mm), and the screw is ladder-shaped.

Product description

The Torin JackBoss hydraulic bottle jack is welded and designed for residential and commercial use. The lifting range is 8.15" to 15.83" with a 6 Ton (12,000 lbs.) capacity. It features an adjustable screw top extension with a heat treated screw that allows a low pickup height adjustment and a maximum lift height. The heat treated saddle is serrated and provides a large lifting area and a secure grip while the rugged base adds stability and strength. The critical stress points are reinforced for added durability and dependability and help extend the life to 5000+ lifting cycles.

• Hydraulic bottle jack designed for residential and commercial use; Lifting range of 8.15" to 15.83" with a 6 Ton (12,000 lbs.) capacity
• Adjustable screw top extension adds versatility; Heat treated extension screw allows low pickup height adjustment and maximum lift height
• Serrated, heat treated saddle provides large lifting area and a secure grip; Wide, rugged base adds stability and strength
• Critical stress points are reinforced for added durability and dependability
• Extended life to 5000+ lifting cycles

User questions & answers

Question:	What is the diameter of the ram
Answer:	The Diameter of the ram is 1.69"（43mm）.
Question:	Can I get a molded case to store it in
Answer:	No, it's only with brown box.
Question:	Will this work in a horizontal position
Answer:	Never tried that. Sealed unit. Don’t see that it would matter.
Question:	Can this jack be stored horizontally without leaking
Answer:	No,It is recommended that you store it vertically to ensure that there is no oil leakage.

Product features

Torin JackBoss Hydraulic Welded Bottle Jack: 6 Ton (12,000 lb) Capacity, Yellow

• Hydraulic bottle jack designed for residential and commercial use
• Dual-stage, steel hardened rams allow for longer travel
• Safety bypass valves prevent overloading
• Hydraulic system is protected from internal damage by a patented by-pass mechanism
• Machined and polished cylinders with die-cut threads provide non-abrasive leak-free, durable performance
• Serrated heat-treated saddle provides generous lifting area and secure grip

Product description

Combines the ease of use of a ratchet style jack stand with the added safety of a pin lock design

Safe engagement of the locking pin can be confirmed visually even at a distance when not under the vehicle

Can easily position or transport stands when pin lock is engaged without possibility of dropping the ratchet bar

Fully ASME/PASE compliant.

• strength and stable - omega lift 32068 is 6 ton jack stands that are designed to support your vehicle after lifting with a floor jack. it features wide pyramid foot base to provide the added strength and stable support.
• sturdy stamped steel - it is constructed with the sturdy stamped steel with a welded frame design for durability. with the lifting range from 16 inches to 23-1/2 inches, it gives you the ability to handle a wide range of vehicles including small cars, suvs, and light duty trucks.
• double locking pins - it features double locking pins mechanism. with both handle lock and mobility pin, and a large saddle surface area is designed for better contact with the load being supported, adding the extra safety while working underneath a car.
• quick height adjustments - the ratchet bar is built with hight quality cast ductile iron with the mulitple position. its sawtooth design allows for quick height adjustments that lock into place. height adjustment mechanism allows smooth upward movement while releasing handle locks and mobility pin
• ansi/pald standards - omega lift heavy duty jack stands are tested for reliability and safety to meets or exceeds ansi/pald standards. ideal for home, auto, truck service, farm, and shop use
• Fit type: Universal

User questions & answers

Question:	What is the minimum and maximum height of these stands
Answer:	measure 15" fully collapsed and 24" fully Extended to the lockable position.
Question:	Are these rated for 6 tons each (can hold a vehicle up to 24,000lbs? Or 6 tons as a pair? (Can hold a vehicle up to 12,000lbs
Answer:	They are rated at 3 tons each for a total of 6 tons per pair.
Question:	Where are these made
Answer:	They're made in China
Question:	What's the maximum height? And if made in usa why the seller is not mentioning
Answer:	measure 15" fully collapsed and 24" fully Extended to the lockable position. Made in China. Don't think one could find a set at this price range made in USA.

Product features

Omega Lift Double Locking Pins 6 Ton Jack Stands (Pair)

Adding Extra Safety with Double Locking Pins while supporting your vehicle after lifting with a floor jack. Omega Lift 6 Ton Jack Stands come in pair that features the wide foot base and is constructed with the sturdy stamped Steel with a welded frame design to provide the strength and stable support. It features a lifting range from 16 inches to 23-1/2 inches to give you the ability to handle a wide range of vehicles including small cars, SUVs, and light-duty trucks.

With the double-locking pins mechanism, it features both handle lock and mobility pin for extra safety. The large saddle surface area is designed for better contact with the load being supported. Also, the ratchet bar is built with high quality cast ductile iron with multiple positions. All of these are design to add extra safety while working underneath a car.

Capacity: 6 Ton

Base Size: 10-1/2" x 8-7/8"

Min height: 16 in

Max Height: 23-1/2 in

Omega Lift Heavy Duty 6 Ton Jack Stands Pair - Double Locking Pins

Product description

1 to 2 Strokes to Allow You to Lift Immediately to Your Desired Load Height

Pro-Lift G-737 Garage Jack is a 3-1/2 garage jack that features speedy lift function. It allows you to immediately lift to your desired load height with 1 to 2 strokes.

It also features universal joint release mechanism to provide precision control of load descent in any handle position.

Pro Lift G-737 Garage Jack is built with the rolled side frame to add strength and reduce twisting. And, its rear swivel casters give you the easy jack positioning. In addition, it features the rubber saddle pad to protect the vehicle while working with the jack

Plus, there is a magnetic tool tray built - in. It gives you the place to keep small parts around the job site for convenience.

- Rubber Saddle Pad to Protect the Vehicle While Working with the Jack

- Universal Joint Release Mechanism to Provide Precision Control

- Magnetic Tool Tray for Convenience, Also Speedy Lift Technology

- Rolled Side Frame and Rear Swivel Casters

Specifications

- Capacity: 3-1/2 Ton

- Lift Range: 5-1/2 to 22 inch

- Package Dimension: 30.3 x 6.9 x 15.75 inch

- Item Weight: 90 Lbs

Pro Lift G-737 Garage Jack is backed with SFA 90 Days Warranty from the Date of Purchase.

Click the buy button now to get your Speedy Lift Garage jack

• The product is 3-1/2 ton garage jack
• Easy and simple use kit
• The product is manufactured in china
• Rubber saddle protects the vehicle while lifting the vehicle
• Universal Joint release mechanism provides precision control of load descent in any handle position
• Magnetic tool tray keeps the small parts around the job site for convenience
• Rolled side frame adds strength to reduce twisting; professional grade
• Foam handle provides comfort to the user while pumping

User questions & answers

Question:	Is this jack "speedy" with weight on it? Or only until you get it started
Answer:	Capacity: 3-1/2 Ton- Lift Range: 5-1/2 to 22 inch- Package Dimension: 30.3 x 6.9 x 15.75 inch- Item Weight: 90 Lbs
Question:	How long is the handle
Answer:	The saddle w/rubber pad is removable and I suppose if you had a trans adapter that mounts the same. I would check with the manufacture, Shinn Fu America.
Question:	What is the range of lift height in inches
Answer:	This is a 6000 lbs jack with lifting range 11 - 21 inches mainly for truck and large SUV. Toyota Corolla is a small car and the bottom height seems not high enough to put this jack underneath. You may look at other Powerbuilt lower profile jack such as below links https://www.amazon.com/Powerbuilt-620484-Inflactor-Electric-inflator/dp/B01N7RFSGG/ref=sr_1_8?dchild=1&keywords=powerbuilt+jack&qid=1610355068&sr=8-8 https://www.amazon.com/Powerbuilt-240076-Profile-Fast-Floor/dp/B07FSTQ944/ref=sr_1_2?dchild=1&keywords=powerbuilt+jack&qid=1610355233&sr=8-2
Question:	Can the saddle be removed to install a trans jack adapter
Answer:	The 4000 pound Unijack offers lift range from 8-5/8 to 18-3/8 inches, which makes it perfect for sedans, minivans and crossovers. Read more at https://www.powerbuilt.com/products/4000-lb-unijack-bottle-jack-jackstand-in-one#RhgJ8m0L7kYgLlRe.99

Product features

Pro-LifT G-737 Grey Speedy Lift Garage Jack - 3-1/2 Ton Capacity

• Innovative design of Speedy Lift technology offers a quick lift for professional performance
• Swivel saddle provides easy jack positioning and user safety
• Heavy duty, steel construction provides safe use and long term durability
• Bypass device prevents over pumping
• Built-in internal safety valve ensures safe operation
• Rear caster for easy jack positioning

• 🚗 [Important Parameters]-- Rated capacity: 6 ton (12,000 lbs) | Max height: 400mm/15.75" | Min height: 160mm/6.30" | Lifting height: 180mm/7.09" | Adjustable height: 60mm/2.36" (adjustable screw top extension) | Net Weight: 4.9kg/10.8lbs
• 🚗 [High Lifting]-- This welded jack breaks through the traditional design, which have double ram. On the basis of constant capacity and volume, the max lifting height is up to 15.75". Easy to carry, and most importantly, it releases a larger working space.
• 🚗 [Sturdy Structure]-- Designed with high-quality alloy steel structure to ensure quality and durability. Inner/outer welded structure, longer service life and stronger overall structure. The pressure pump is designed to lift with minimal effort.
• 🚗 [Widely Use]-- The hydraulic jack is designed for residential and commercial use, which can lift most car, van, off-road vehicle, minivan, truck, SUV, RV, etc.
• 🚗 [One Year Warranty]-- We provide ONE YEAR warranty for every customer. If you have any questions, welcomed to contact us whenever and whatever possible, we're honored to offer you the timely and effective support.

User questions & answers

Question:	What is the diameter of the top cylinder & the top ram? (I have bottle jack accessories into which it must fit
Answer:	The diameter of the top is 20mm. The diameters of the two rams are 22 mm and 8 mm.
Question:	Where is this made
Answer:	It's made in China
Question:	can you send us a black case if we order? if is possible
Answer:	If you purchased Fulfilled by Amazon, we cannot guarantee that the box you received is black because it is shipped randomly. If you choose Boshi Electronic Instrument for purchase, we can send you 4T bottle jack with black box from the factory. Thanks
Question:	What do the terms "self height", "lifting height" and "total height" mean? self height + lifting height do not equal total height
Answer:	Please look at the second picture of the product page, there is a detailed explanation iamge of the height. In addition to the normal lifting height, the jack has a small section to adjust the height of 2.36 inches (black part at the top). Self Height 6.5" + Lift Height 7.68" + Adjust Height 2.36"= Total Height 16.54"

Product features

BAOSHISHAN HYDRAULIC BOTTLE JACK

6 Ton Double Ram Bottle Jack

• High Lifting-- our jacks break through the traditional design, which have double ram. On the basis of constant capacity and volume, the lifting height is up to 15.75".
• Small Size-- while the welded bottle jack can complete the rated load, it has a compact body and weighs only 10.8 lbs.
• Widely Use-- this hydraulic jack is designed for residential and commercial use, which can lift most car, van, off-road vehicle, minivan, truck, SUV, RV, etc.