12 best thermostat circuits

Product description

The HWPT (hot water) Series Programmable thermostat with 15 minute pump exciser was intended for use as a 2 circuit thermostat controlling a circuit pump and fan on a hydronic coil heating system, though it could be used when needing a 2 circuit control with 1 minute delay on the second circuit. This control solves the historic problem of using a standard 22 Amp bi-metal heating thermostat on a hydronic system which require high Amp loads to be accurate. Without a load they will not shut off properly, continuing to circulate hot water when not needed. This control positively controls both circuits creating energy savings and superior comfort control, while providing excellent hydronic control. The HWPT adds 7 independent day programming with 4 times and temperature settings per day to save energy and also start system before you get home. Plus it adds a 15 minute pump exerciser every 24 hours as required by code on potable water heating systems. First cycle will start in 12 hours from the power on time so that all cycling will happen at night.

• 7 independent day programming with 4 times and temperature settings per day
• 15 minute pump exerciser every 24 hours as required by some codes
• Accuracy: 1. 2°F @ 10 amps, . 9°F @ 4. 2 amps
• 12. 5 amps / 120 volts
• Range: 44°F to 95°F (7°C to 35°C)
• Save up to 28% on your heating costs
• Electronic temperature sensing is the most accurate technology

User questions & answers

Question:	Is this thermostat suitable for wet locations like a bathroom
Answer:	*9 x 4 inch zipper pouch w/ 4 x 2 3/8 inch pockets
Question:	Does it still run 15 minutes the same time every day, even if ran earlier in the day for over 15 minutes
Answer:	yes, that is what we used them for.

Product description

This kit contains all the necessary components for an energy efficient electric floor heating system: a heating element, a circuit check continuity alarm, and a thermostat. All you ll need to enjoy warm floors is the flooring itself and the right embedding agent like thin set or self-leveling cement (sold separately). cut-and-turn design for easy custom sizing this underfloor heating kit includes 32 Square'. of TempZone 120V flex roll floor heating element (1. 5 ft. X 6 ft. ). This option is a fast, easy way to layout floor heating, while still maintaining proper spacing for even heating. The twin conductor heating element is attached to the fiberglass mesh in a serpentine pattern to ensure a heat output of 15 watts per sq. Ft. This mesh also makes it easy to cut-and-turn the rolls during installation without damaging or cutting the cable itself. Nspire touch programmable touchscreen thermostat included this kit also contains an inspired touch programmable thermostat. With its 3. 5 touchscreen and full color display, it s not surprising it s our most popular control. Also included is a circuit check continuity alarm, which will alert you if the heating element is damaged during installation, and a floor sensor. The WarmlyYours advantage every WarmlyYours product comes with free, lifetime technical support just give us a call anytime, day or night. If you re not sure where to start, WarmlyYours can also provide you with a free custom installation plan in typically about 1 day.

• TEMPZONE ELECTRIC RADIANT FLOOR HEATING FLEX ROLL: WarmlyYours TempZone Electric Radiant Floor Heating Flex Roll is perfect for installation underneath ceramic tile, natural stone, nailed hardwood, wood, and other popular flooring materials, this cut-and-turn 32 sq. ft. roll consists of a heating cable secured with double-sided tape onto a fiber-glass mesh, and the heating cable is distributed in serpentine 3" apart loops, which helps deliver even heating throughout flooring areas, with a 1/8" low profile twin conductor, 1 return lead, fits any room shape without significantly raising the floor height
• nSPIRE TOUCH PROGRAMMABLE THERMOSTAT: This dual voltage (120V/240V) thermostat comes with energy log for tracking use and built-in self-testing GFCI, features "Child-Lock" function and a 3.5” full color touchscreen, complimentary floor sensor allows for energy efficient operation of your floor heating system, with the ability to set up 4 separate temperature events per day and the integrated install wizard, lets you customize your comfort while cutting down on operating cost
• CIRCUIT CHECK: This exclusive Circuit Check was developed by WarmlyYours for use in monitoring the floor heating system before, during and after installation, gives you peace of mind and ensures trouble-free installation of your radiant floor heating system, beeps immediately if the heating cable is damaged and a short or break occurs, will alert the installer to a potential problem before the floor covering is installed
• TESTED AND SAFE: The 120 VAC WarmlyYours TempZone Electric Radiant Floor Heating Flex Rolls are cULus Listed

User questions & answers

Question:	Does the thermostat include gfci
Answer:	This thermostat is designed to be the central/primary control for a hydronic heating system... I doubt your central control is in your bathroom. I would suggest more research and buy what you actually need.
Question:	Can it be installed by adding a plug for temporary use, Like in a RV
Answer:	The first cycle is in 12 hours, then every 24 hours it cycles the pump for 15 min.
Question:	Is there a rough in kit available
Answer:	Just the outer sleeve.
Question:	Can i could use this under a rug until floor is redone? (hardwired ok) how long to heat up? cost to run
Answer:	9 3/4 x 3 3/4 inches The front features a clear appointment or business card slot that fits up to a 3 3/4 x 2 inch card.

Product features

Floor Heating Kit 120V-TempZone Flex Roll 1.5' x 21' + Touch Screen Thermostat

Hard flooring surfaces can be cold underfoot any time of year, but are especially so when the weather gets cooler. Who wouldn't enjoy the comfort of a WarmlyYours radiant in-floor heating system in their home? WarmlyYours TempZone Flex Roll installs underneath ceramic tile, natural stone, hardwood, wood, and other popular flooring materials, giving homeowners radiant in-floor heating that's truly luxurious.

TempZone heating mats for floors consist of a heating cable secured onto a green mesh fabric, and the heating cable is distributed in serpentine loops. The cable loops are 3" apart, which helps deliver even heating throughout flooring areas, never leaving cold spots in the room.

With an included floor sensor, your system can cycle on and off and continuously adjust to save energy. This kit also includes a Circuit Check electrical continuity alarm which can alert you if the heating elements are damaged during installation and a programmable floor heating thermostat.

Tempzone Flex Roll

WarmlyYours TempZone Flex Roll installs underneath ceramic tile, natural stone, hardwood, wood, and other popular flooring materials, giving homeowners radiant in-floor heating that's truly luxurious. TempZone heating mats for floors consist of a heating cable secured onto a green mesh fabric, and the heating cable is distributed in serpentine loops.

nSpire Touch Programmable Thermostat

With an integrated Install Wizard, it’s never been easier to set up a radiant heating system according to your preferences and schedule. The nSpire Touch allows you maximum control over the floor temperature with 4 programmable events for each day of the week, which is great for 'Goldilocks households' where there will be frequent adjustments to the temperature or thermostat’s schedule until it’s 'just right'.

Circuit Check

This exclusive tool was developed by WarmlyYours to give you peace of mind and ensure trouble-free installation of your radiant floor heating system. Circuit Check beeps immediately if the heating cable is damaged and a short or break occurs. For use in testing the floor heating system before, during and after installation, Circuit Check will alert the installer to a potential problem before the floor covering is installed.

Product description

Two Circuit Thermostat - Allows 2 independent 15 or 20 amp 2 pole circuit breakers to be controlled by one thermostat location. When a large room needs multiple heater circuits but requires one control location. Featuring a new dial, protected from wandering fingers under the front cover, function selection is an easy twist to the left or right. Need to quickly raise or lower the heat? Just push the up or down arrows. Tap the display button to show time, set point or current temperature. This smart thermostat will conveniently tell you by LCD icon when to change the batteries! At King we know what you want and always strive to give it to you.

• 4 wire connection
• 7 independent day programming
• Two synchronized Snap action relays
• 3 minute cycle delay reduces fast temperature swings
• Adjustable 1-4 degree temperature swings
• Backlit LCD Display

User questions & answers

Question:	This thermostat is listed as hydronic on Amazon but not on King website. Will it safely work on convection baseboards
Answer:	Good morning, It can not be used with a plug no. The roll needs to be put down under the flooring and the electrical run back to the thermostat which is connected to the electrical panel. Please let us know if you should have any other questions.
Question:	how many watts will this control
Answer:	Good morning, We do not offer the rough in kit through amazon.
Question:	will the thermostat work if heaters are on the same cirbuit/breaker, or are they required to be on separate circuits/breakers
Answer:	Good morning, This item can not be used under a rug no, it needs to be installed underneath the flooring embedded in latex modified thinset or self levelling. It takes up to 30min min to get to the desired temperature , and cost to run depends on location and how long it is run for but on average it is 0.60 per hour.

Product description

This genuine Pentair electronic thermostat circuit board replacement is a direct fit for many Pentair heater models. It fits the following: MiniMax Plus, MiniMax CH 150 IID, MiniMax with CSD-1 control, MiniMax Low Nox, commercial MiniMax (manufactured prior to July 2006), commercial PowerMax (manufactured prior to July 2006), and PowerMax models 150, 200, 250, 300, 350, and 400.

• Genuine Pentair Replacement Part
• Fits Pentair MiniMax Plus, Pentair MiniMax CH 150 IID, MiniMax with CSD-1 Control, and MiniMax Low Nox
• Fits Commercial MiniMax and PowerMax Models Manufactured Prior to July 2006
• Fits PowerMax Models 150, 200, 250, 300, 350, and 400

User questions & answers

Question:	Where can I buy some replacement plastic circuit board standoffs? Mine broke and won't hold the board in place
Answer:	Not sure which stand offs you are referring to as I replaced my a while ago, but standoff a are a pretty standard part. I would try McMaster Carr. They carry a wide selection of standoffs. You need to know what size screw you're using.
Question:	Is this item returnable for a full refund ? Thank you
Answer:	I did not need to return it nor did I check.
Question:	Will this work for Pentair compool cp
Answer:	I installed this product on PUREX triton MiniMax 400 heater product. It was an exact match for my pool heater
Question:	Does it work for minimax plus hp
Answer:	To prevent any confusion, I installed this board in a Purex Triton Minimax Plus model 400. It was a drop in replacement. It worked with no issues. Its still working today. You can find a You Tube video on line to take you through the installation. Hope this helps.

• ✹✹ The W1209 thermostat module controller has a sensor input, keys, LED display, and a relay. It can be reprogrammed for control, timing, or counting.
• ✹✹ Temperature Measurement Range: -50~110℃. Control Precision: 0.1 celsius.Input Power (DC): 12V; Measuring Inputs: NTC (10K 0.5%) ; Waterproof Sensor: 0.5M; Output: 1 Channel Relay Output, Capacity: 10A; Power Consumption: Static Current: 35mA; Current: 65mA.
• ✹✹ Electronic digital thermostat with a 3-digit LED display, extremely bright. Operation both in heating and cooling to easily control equipment and devices.
• ✹✹ The output is electronically controlled by a microprocessor, to guarantee the utmost precision of intervention and an excellent resolution of reading temperature.
• ✹✹ The NTC probe is waterproof and allows to control the temperature even of fluids, allowing the controlled heated or cooling【Note: The wood laminate case is the clear plastic case. You need to tear the wood outside layer off carefully, the outside layer is very thin. (It can protect the inside to prevent scratches.) And you need to assemble and install the case by yourself, it comes disassembled with tiny bolts and nuts.)】.

User questions & answers

Question:	Does this forget settings when you power it off or loses power? Or does it remember all your settings
Answer:	It will work on as long as the load doesn't exceed 16A however for a baseboards heater I would recommend another model such as the K302PE, ESP, or K101.
Question:	Where can I get instructions ?.... mine arrived without any
Answer:	7700 @ 240 volt...6656 @ 208 volt and 3840 @ 120 volt..
Question:	What is the maximum amp I can use on the device and noe get burn or damaged
Answer:	I don’t know why you would get this model if your heaters are on just one circuit breaker. They make other models that are for one circuit. This one is specifically designed for two circuits.
Question:	How can it be set to read in fahrenheit
Answer:	Good afternoon, Yes it does. Please let us know if you should have any other questions.

Product features

Specification

• P0 :Cooling / Heating; Range: C/H; Default: C
• P1 :Hysteresis Setting; Range:0.1-15; Default: 2
• P2 :Highest Setting Limit; Range:110; Default: 110
• P3: Lowest setting Limit; Range:-50; Default: -50
• P4 :Temperature Correction; Range:-7~7℃; Default: 0℃
• P5: Delay Start Time; Range:0-10 Minute; Default: 0
• P6: High Temperature Alarm; Range:0-110; Default: Off
• When the Thermostat is power off, long press "- or +", you can restore the factory settings

W1209

• Temperature Measurement Range: -50~110℃
• Single LCD Display Screen
• Package Included: 2 Pack Modules.

W1209 + Case

• Temperature Measurement Range: -50~110℃
• Single LCD Display Screen
• Package Included: 2 Pack Modules + 1 PCS Instruction.

W1219

• Temperature Measurement Range: -50~110℃
• Double LCD Display Screen
• Package Included: 2 Pack Modules

Product description

The standard UL approved 2511 series ¾" bimetal snapdisc thermostats are capable of switching high-current applications over precise temperature ranges. Originally designed and manufactured by Honeywell and Elmwood Sensors. Now manufactured by Senasys. Sealed and gold versions are also available for unique applications.

• UL Approved up to 250 VAC and 25 AMP resistive load.
• Rated for environmental conditions up to 350°F.
• Snapdisc thermal control closes on temperature rise: Close 100°F Open 85°F (+/- 5°F)
• Temperature switch will last for over 100,000 operations under normal usage.
• Model number: 2511F002-351

User questions & answers

Question:	I want to use this to control a fan where the plug is a transformer from 120v to 5v. Should I install the switch between fan and plug or plug and wall
Answer:	it remembers the settings
Question:	When this Switch Fails.... Does it stay open (off) or closed (on
Answer:	I found instructions by using Google and finding the same device with instructions on other websites such as..... https://www.aliexpress.com/item/32827235671.html
Question:	I'm using this in 12v system. Should the switch be wired to the positive wire or to the ground wire
Answer:	Input 12v output 1 channel relay capacity 10 amp.
Question:	can I use this on a Motor home 12 volt vent fan on the back of the refrigerator
Answer:	W1209 C only. W1219 F/C based on seller's stored code. ZERO directions, but while testing parameters, i discovered that on this edition of the W1219 there is a P5 with F/C. That I know of there are no current ROMs shipping preprogramed on the W1209 to display Fahrenheit. That not one seller (or re-seller) has taken the time to write code to display F is a testament to their lack of understanding of the economics of lazy Americans. We would pay $2 extra per unit not to have to deal with Centigrade. Heck, I'd prefer a unit that displayed KELVIN over C. I do wish these sellers would include a sticker/stamp on the device to identify the stored program. Not everyone out here has the ability to plug into the board and read/correct the code. I've got some W1209 with compressor delay on P4 and some with compressor delay on P5. Some with compressor delay 00-10 minutes, and two with delay 000-999 seconds (16:39).

Product description

Type:Voltage Regulator

Condition:New

Supply Voltage:other

Dissipation Power:other

Operating Temperature:other

Features:

Easy use.

Front panel cook control.

Front panel smoke control.

Three digit temperature display.

With smoke mode and high mode.

Compatible with Pit Boss wood pellet grills.

Eight cook temperature settings (200℉ to 475℉).

Includes P一Setting Adjustment (which controls timing on smoke mode).

Package Included:

1 x Digital Thermostat Controller Board

Unit Type:piece

Package Weight:0.38kg (0.84lb.)

Package Size:26cm x 10cm x 10cm (10.24in x 3.94in x 3.94in)

• Easy use.
• Front panel cook control.
• Front panel smoke control.
• Three digit temperature display.
• With smoke mode and high mode.

Product description

Parameter:

Power supply: DC6.0~30V or 5V Micro USB

Temperature control range: -50℃~110℃

Temperature control precision: 0.1℃

Measuring input: NTC10K/B3950

Refresh rate: 0.5 second

Output type: relay output 10A

Probe type: waterproof probe, L: 0.5m



Set Parameter:

Working mode / setting temperature / hysteresis temperature setting:

1. In the running interface, short press the “SET” button to enter the quick setting interface.

2. After entering the quick setting interface, switch the parameter to be set (working mode/setting temperature/ hysteresis temperature) by short pressing the “SET” button.

3. Change the parameter value by pressing 'UP' or 'DOWN' after select parameter.

4. Hold press “SET” button for more than 3 seconds or have no any button operation for 6 seconds, it will save the parameters and exit the quick setting interface automatically.



Set ALA/OPH/OFE (Alarm temperature / delay starting setting / temperature correction:):

1. In the running interface, hold press the “SET” button for more than 3 seconds, enter the parameter setting interface.

2. After entering the parameter setting interface, switch the parameter to be set (alarm temperature/delay starting setting/temperature correction) by short pressing the “SET” button.

3. Use the “UP” “DOWN” button to change the parameter.

4. Hold press “SET” button for more than 3 seconds or have no any button operation for 6 seconds, it will save the parameters and exit the parameter setting interface automatically.



Package Including:

1x Electronic Thermostat Controller

• DROK electronic thermostat controller power supply is DC 6-30V or 5V micro USB; control load current is 10A (Max); test temperature is -50~110℃; sensor length is 0.5 meter.
• High current: Our digital temperature control board adopts high density PC board installation technology, the switch capacity can be up to 10A in spite of the small size.
• LCD display: Designed with bright LCD display, people can check the temperature clearly from any angle.
• User-friendly functions: The thermostat module has the function of real-time temperature reporting, temperature correction function, high-temperature alarm, emergency stop function and support UART Set, which make the module reliable and easy to use.
• Applications: With waterproof temperature sensor probe, it can be widely used for domestic appliance, office machine, audio, equipment, automobile, etc. （Remote control TV receiver, monitor display, Audio,Raspberry Pi equipment high rushing current use application）

User questions & answers

Question:	Do they make an enclosure for it
Answer:	if you wire the switch between the power source (wall)to the transformer it will control power to the transformer and anything that the transformer is sending power to . if you wire it between the transformer and the fan it will shut down the fan but the transformer will stay powered up as long as the transformer is plugged into the wall power source. I would use it on the 110 side to shut down the transformer.
Question:	Is the a pwm speed control version of this controller? i.e. instead of just on/off, it would actually regulate the fan speed according to temperature
Answer:	Mine works fine. That is a 50/50 question, if the contacts fried when loaded I guess it would stay on. Then again it could fail to come on for load. Rated for 100,000 plus cycles at rated amps.
Question:	do i need a external relay with this or is one built in
Answer:	the positive wire should go to one side of the switch. Come off the other side of the switch to the positive side of the component you want to control.The ground(negative) will be straight to the negative side of the component you want to control
Question:	Hi. Wire sensor probe is included in the packaging? Thanks
Answer:	NO! The thermoswitch is designed for 115 volt AC. The 12 Volt circuit you are asking about is 12 Volt DC. It will take the voltage and blow like a fuse will do in less than 30 seconds.

• 🔖【 Ceramic Insulation Element 】 The 12v dc ceramic heater circuit adopts with ceramic insulation, safe to use and can be dry heated for a long time, high reliability
• 🔖【 Eco-friendly Aluminum Housing 】This 12v heating element is made of aluminum, eco-friendly, sturdy and durable in use
• 🔖【 Wide Application 】 100% brand new and high quality ceramic heating element, widely used in Air conditioning, electric heating, automobiles, air curtains, humidifiers, dryers, etc. Also used for car and electronic components preheating
• 🔖【 Temperature Resistant Lead Wire 】 Comes with a 15cm lead wire, which is high temperature resistant. It can be easily used to heat solids and gases. Simple structure, easy to install and long service life
• 🔖【 Warranty 】 We are here with a 100% product promise to give you the best in customer care! Please feel free to contact us if you are not satisfied with it for any reason. We promise all the issue will be solved within 24 hours

User questions & answers

Question:	how mini amps will this us 12v
Answer:	yes
Question:	Can the temperature be controlled and if so, do you sell controller
Answer:	This one set limit on off. No speed control
Question:	What is the lowest heat setting? My egg incubator needs to be at 37.5 C
Answer:	There is a 20A relay built in (Relay #SRA-05VDC-CL on mine).
Question:	Can I get a data sheet for this ptc heating element? Please post a link
Answer:	Wire sensor included

Product description

18-Gauge, 3 Conductor, Solid Copper Thermostat Wire, Class 2 Power-Limited Circuit Cable, Brown Jacket. Southwire Thermostat Wire is manufactured using solid copper conductors with 6 mils of polyvinyl chloride PVC insulation. The two conductor cable is flat-multiconductor cables are round. Southwire's Thermostat Wire is a class 2 power-limited circuit cable for use in heating and air conditioning controls bell and alarm systems. Southwire's thermostat cable adheres to the following specifications: Class 2- Power Limited per NEC Article 725, MP- Multi Purpose Cable per Articles 725, 760, and 800, CM-Communication Cable per Article 800, FPL-Power Limited Fire Protective Signaling Cable per Article 760, Sunlight Resistant, PVC Insulation, and Solid Bare Copper per UL Standard 13, RoHS Compliant, OSHA Acceptable. Southwire provides a full line of products, in both copper and aluminum, for a wide range of applications. The company leads the industry in new and innovative products that help simplify installation, saving time and money. In addition to its standard product line, Southwire can also make custom products offering its customers the most complete line of products for almost any requirement or situation. No matter what the residential, commercial, or industrial application requires, you need look no farther. Southwire has just the right wire and cable product you're looking for.

• Rated 150-Volt
• Sunlight resistant (-20-Degree C to 60-Degree C)
• 18 gauge copper conductors
• Green compliant RoHS
• Made in the U.S.A.

User questions & answers

Question:	rolls 500' each
Answer:	Good luck

Product description

The 91365 SVC Control Board Fuse Combo Kit replaces the Atwood 9385. It will work with Atwood Electronic Water Heater Models: GCH6A-10E, GC6AA-10E, GC10A-4E, GCH10A-4E, GCH10A-4E, XT Series.

• NEWEST MODEL: Replaces Atwood 93851.
• COMPATIBLE WITH WATER HEATERS: Models GCH6A-10E, GC6AA-10E, GC10A-4E, GCH10A-4E, GCH10A-4E.
• COMBO BOARD: Controls BOTH the LP ignition and the Electric Element. Atwood part #93309 (edge pin connector) NOT included.
• TECHNICAL SUPPORT: Atwood provides prompt support in diagnosing and resolving technical problems.

User questions & answers

Question:	Will this replace G6A-8E
Answer:	I don’t know if it’s designed for oven. It’s designed as pilot light for water heater. Best to consult your manual or contact the manufacturer.
Question:	Why do these POSs only last about a 18 months
Answer:	Don’t know exactly. It was a perfect replacement for my Atwood regulator. I was concerned before I bought it but it worked out great. If my memory is correct it was about 9 inches.
Question:	Why does the photo above show part 93305? What am i ordering
Answer:	Yes it can be for replacement on campers. I don't remember the length of the gas line, but I installed it on a camper and had plenty of line. Hope this helps
Question:	Is this replacing mpd
Answer:	yes

• 🌡️Automatically turns fireplace on and off at set temperature of thermostat switch
• 🌡️Snapdisc thermal control closes on temperature rise: Close 100°F Open 85°F (+/- 5°F)
• 🌡️Replaces the majority of fixed disc thermostats now on heating equipment and various appliances.Model number: 2511F002-351
• 🌡️Reduces inventory while providing coverage for a wide range of temperature applications
• 🌡️Funmit is devoted ourselves to provide our customer with quality product and excellent service at a reasonable price,and you can get a free replacement or full refund whatever you are not satisfied

Product features

After-market Replacement

Directly replaces the majority of fixed disc thermostats now on heating equipment and various appliances, reduces inventory while providing coverage for a wide range of temperature applications.

How it Works

They are used in both heating and cooling applications to ensure the process temperatures do not exceed the thermal limits of the equipment or process.

Adjustable Snap Disc Thermostat allows you to set the temperature set point to match your specific needs which simplifies inventory, automatically turns fireplace on and off at set temperature of thermostat switch, Close 100°F Open 85°F (+/- 5°F).

24 Hours Online Service

The 24 hours online service help reslove your problems no matter whatever inquiry you meet about our product.You can get a promptly response.

Confident Buy

Every item from Funmit is well inspected and tested by manufacturer,you can get a free replacement or full refund whatever not satisfied.

Perfect Solution

Funmit will provide a pro tech solution & quality products for every customer to enhance shopping experience from us.