13 best brass metal raw materials
Brass is a popular metal alloy known for its various industrial and commercial applications, particularly in tubing, pipes, and plumbing. Here is some information about brass as a raw material in these contexts:
Composition:
- Brass is primarily composed of copper (usually around 60-80%) and zinc (20-40%). The exact composition can vary to achieve specific properties and characteristics.
Properties:
- Brass exhibits several desirable properties, making it suitable for various applications:
- Corrosion Resistance: Brass is resistant to corrosion, which makes it ideal for use in pipes and tubing for carrying liquids, including water.
- Malleability: It is highly malleable, allowing it to be easily shaped and formed into different sizes and shapes.
- Good Conductivity: Brass is a good conductor of electricity, making it useful in electrical applications.
- Aesthetic Appeal: Brass has an attractive golden or yellowish appearance, making it a preferred choice for decorative purposes.
- Brass exhibits several desirable properties, making it suitable for various applications:
Tubing and Pipes:
- Brass tubing and pipes are used in a wide range of applications, including plumbing, HVAC systems, and industrial processes.
- Brass tubes are often employed for the transportation of fluids, such as water and gases, due to their corrosion resistance and durability.
- The malleability of brass allows for easy bending and shaping of tubing to meet specific installation requirements.
- Brass pipes are commonly used for water supply lines and plumbing fixtures.
Hydraulics and Pneumatics:
- Brass is widely used in hydraulics and pneumatics for various components like fittings, valves, and connectors.
- Brass fittings are favored for their resistance to corrosion and leakage in hydraulic and pneumatic systems.
- Valves and connectors made from brass are durable and reliable, ensuring smooth fluid control and pressure regulation.
Industrial and Scientific Applications:
- Brass is used in industrial equipment, scientific instruments, and machinery due to its excellent machinability and electrical conductivity.
- It is employed in the manufacture of gears, bearings, and bushings, where its low friction properties are beneficial.
- The electrical conductivity of brass makes it suitable for electrical connectors and terminals.
Alloy Variations:
- Different brass alloys are available to cater to specific requirements. For instance, dezincification-resistant (DZR) brass is used in environments where corrosion resistance is crucial, such as in plumbing and marine applications.
Finishes and Surface Treatments:
- Brass surfaces can be treated with various finishes, such as chrome plating, to enhance their appearance and provide additional corrosion protection.
Recyclability:
- Brass is a highly recyclable material, and recycling brass products helps conserve resources and reduce environmental impact.
In summary, brass is a versatile and widely used metal alloy in industries related to tubing, pipes, hydraulics, pneumatics, plumbing, and scientific equipment. Its unique combination of properties, including corrosion resistance, malleability, and electrical conductivity, makes it a valuable raw material for various applications in the industrial and scientific sectors.
Below you can find our editor's choice of the best brass metal raw materials on the market
Brass Flat Bar Stock 3/8"(.375") x 1" x 6" C360 Extruded Rectangle Metal - 1pc
Product description
Brass Flat Bar Stock 3/8"(.375") x 1" x 6" C360 Extruded Rectangle Metal - 1pc Brass flat bar stock 3/8"(.375) inches thick 1" wide by 6" long This is extruded C360 brass. Listing price is for 1 ea 6" bar of material.
- Item specifics Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
- Brand: Unbranded
- Model: brass flat bar
User questions & answers
| Question: | Is this a true 3/8/ inch |
| Answer: | It's a pretty soft rubber. I'm using it as gasket material between a handle and metal door. Under a good amount of pressure I imagine it would split. |
1/8" x 2" C360 BRASS FLAT BAR 12" long Solid .125" Plate Mill Stock H02
Stoner Metals
Product description
1/8" x 2" C360 BRASS FLAT BAR 12" long Solid .125" Plate Mill Stock H02
- Solid Brass Bar Stock
- H02 (Half Hard) Temper
- Mill Finish
- Sourced and Assembled In the USA!
User questions & answers
| Question: | Any chance to custom order a 2”x 28” piece |
| Answer: | I’m not a seller. |
| Question: | Looking for 24" length. Do you have that |
| Answer: | i don't sellem ... i bought one is all |
| Question: | Do you sell one that is just slightly less wide? I need 1 7/8” wide instead of |
| Answer: | I suppose it would depend upon how you're doing the engraving. I've engraved brass with a Hermes setup and this material should work fine for that. |
| Question: | Can this brass plate be engraved? I want to make some custom shape name plates |
| Answer: | Actually, I just measured the bar (.412) I did not surface it any, just a wire brush etching. So, the .375 has to be nominal like lumber is notated from the mill. Hope this helps |
2mm x 100mm x 1000mm H62 Brass Metal Thin Sheet Foil Plate Roll
Yodaoke
Product description
1pcs H62 Brass Metal Thin Sheet Foil Plate Roll 0.02mm x 100mm x 1000mm
User questions & answers
| Question: | Can this me cut with scissors |
| Answer: | Yes |
| Question: | Will this patina |
| Answer: | beats me .. i bought mine off amazon |
K&S Precision Metals 5078 Bendable Brass Strips.032" X 1/4 & 1/2 X 12" Long, 3 Pieces per Pack, Made in The USA
K&S
- INCLUDES: 3 Bendable Brass Strips from K&S
- FEATURES: May be bent to desired shape and cut to desired length Great for scratch builders, modelers, crafts, machine shops, and architectural applications
User questions & answers
| Question: | Can these be cut to size if I need them to be shorter |
| Answer: | This brass is bendable, so it really depends on your experience. I would get an extra piece to have on hand in case you get a kink or twist on your first attempt. It will help you a lot if you have something solid (same diamter as the lamp shade) to work against rather than trying to bend around the lamp shade itself. |
| Question: | Could I bend this around a round metal lamp shade that I’m making |
| Answer: | Yes you can solder brass |
| Question: | can you solder these |
| Answer: | It's several different pieces in three different sizes the same thickness |
| Question: | is this one continuous strip or several small ones |
| Answer: | Yes. I have used scissors and Xacto knives. The material could have a paper pattern attached with a removable adhesive and still be easily cut with a scissor. |
Brass Flat Bar Stock 3/16"(.1875") x 1" x 6" C360 Extruded Rectangle Metal - 1pc
SuperDi
Product description
Brass Flat Bar Stock 3/16"(.1875") x 1" x 6" C360 Extruded Rectangle Metal - 1pc Brass flat bar stock 3/16"(.1875) inches thick 1" wide by 6" long This is extruded C360 brass. Listing price is for 1 ea 6" bar of material.
- Item specifics Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
- Brand: Unbranded
- Model: brass flat bar
K&S Precision Metals 9733 Brass Strip, 0.064" Thickness x 1" Width x 36" Length, 3 pc, Made in USA
14 years and up
Product description
Easy to bend, cut and shape. For hobbies, model building, shims and spacers. Brass assorted pieces.
User questions & answers
| Question: | Is this 3, 36 inch pieces or just |
| Answer: | Yes they can, with either shears or a cut off tool. .032" is a pretty slim profile on the thickness. |
Product features
Variety Of Sizes
K&S Metals offers a wide variety of sizes to suit your specific project!
Variety Of Uses
- Hobby/Craft
- Home Improvement/DIY
- Electrical
- Engineering
- Education
- Static Models
- Puppetry
- Prototyping and more!
Glarks 21pcs 3 Sets of Metals Round Rod Lathe Bar Stock for DIY Craft Tool, Diameter 2mm - 8mm, Length 100mm, Metals Include Brass, Stainless Steel, Aluminum
10 months and up
Product description
High quality Glarks 21pcs 3 sets of Metals Round Rod Lathe Bar Stock
Materials: Brass, stainless steel, aluminum
Diameter: 2mm, 2.5mm,3mm, 4mm, 5mm, 6mm, 8mm
Length: 100mm
Color: Golden, Silver
Packaging Details:
Brass:
2mm ---------- 1pc
2.5mm -------- 1pc
3mm ---------- 1pc
4mm ---------- 1pc
5mm ---------- 1pc
6mm ---------- 1pc
8mm ---------- 1pc
Stainless Steel:
2mm ---------- 1pc
2.5mm -------- 1pc
3mm ---------- 1pc
4mm ---------- 1pc
5mm ---------- 1pc
6mm ---------- 1pc
8mm ---------- 1pc
Aluminum:
2mm ---------- 1pc
2.5mm -------- 1pc
3mm ---------- 1pc
4mm ---------- 1pc
5mm ---------- 1pc
6mm ---------- 1pc
8mm ---------- 1pc
Total: 21pcs
Application: Widely used in Gear shaft, motor shaft, short support shaft, shaft pocket model, miniature axle, model plane, model ship, model cars
Note: small parts, keep away from children
- 1. Materials included: Brass, stainless steel, aluminum
- 2. Diameter: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm
- 3. Package: 1pc for each size, 7 sizes for each material, 21pcs in total, stored in a transparent box
- 4. Feature: Good material for DIY craft making, sturdy and durable
- 5. Application: Widely used in Gear shaft, motor shaft, short support shaft, shaft pocket model, miniature axle, model plane, model ship, model cars
User questions & answers
| Question: | What’s the length |
| Answer: | I’m not certain, maybe contact the vendor? |
| Question: | Is this variety of diameters & materials available in a longer length, ie 12" (300mm |
| Answer: | No, they are made of brass, stainless steel, aluminum. no galvanized on the surface. |
| Question: | Is it galvanized |
| Answer: | From the few I’ve used so far (7-8 different rods), they have all been accurate checking with calipers. |
| Question: | I need a 2.5mm brass rod (not 3/32")... Are the listed diameters of the rods accurate |
| Answer: | Yes, 3 - 36" pcs |
1/8" x 2" C360 Brass Flat BAR 12" Long Solid .125" Plate Mill Stock Solid Brass
Aladean Brass Bar
- Mill Finish Solid Brass Bar 1/8", A Variation of (+/-1mm) is always possible as its Fresh Cut
- Brass Flat Bar Plate Sheet 1/8" x 2 inch x12 inch approximately 3mm thickness & A Variation of (+/-1mm) is always possible as its Fresh Cut
- Medium Hard , easy milling, Brass Flat bar perfect for tooling , crafting
- Best Quality brass flat bar Knife Blade raw material,
User questions & answers
| Question: | So, I ordered and received two of these. The first piece was at least .025" narrower than 2". What is the tolerance on sizes for this brass |
| Answer: | They are 100mm/3.9inch in length. |
Product features
Brass Flat Bar - Fresh Cut Mill finish C360 Brass Plate in various sizes & thickness for Craft, Milling, Lathe , Knife , blade model
Brass flat bar Mill stock fresh cut custom sizes are offered in high quality. Select your size from one of listing variations carefully. We offer a wide variety of size variation and hence recommend that you choose the right size as per your requirement. If you wish to get a size that is not listed here send us your requirements. Fresh cut Brass Flat Bar stock is perfect for a variety of Craft , milling, lathe, knife hobby raw material & custom engraved plates.
Solid Brass Round Bar Rods Rectangular Square Round shape Brass available in different sizes.
We offer a wide variety of Fresh Cut Brass Flat Rectangular bars , Square, Hexagonal & Round Rods, Rectangular Plate Sheets in semi hard quality that are perfect for milling, Lathe , Tooling & DIY craft work. Perfect for hand made Knife Blade project and raw material of great quality. Premium quality Brass parts can be crafted using this raw material. Select the size based on your project requirements.
Mill finish Brass Raw Material Stock- Can be polished to achieve high Luster finish.
The Brass Raw material we supply is in mill finish, The stock is fresh cut and can be polished to achieve a very high Luster Polished finish for your project.
Brass Bars, Rods , Plates & Sheets are offered in various custom thickness and lengths. Note that as these are mill finish cleaning of the surface might be required.
High quality brass parts , handles, screws , custom project parts can be crafted in this.
Brass Flat Bar Mill Stock Fresh Cut Plate
Various width & thickness are available in brass flat bars. Kindly note there can be a (+/-)1mm Tolerance in the sizes.
- 2" inch is approximately 50 mm
- 1" inch is approximately 25 mm
- 6" inch is approximately 150 mm
- 12" inch is approximately 300 mm
- 4" inch is approximately 100 mm
Spend some time to understand the brass flat bar sizes, so you get the right size of brass bar for your project.
Square Brass Rods & Bars
- 1/2" inch Square Brass Bars
- 1" inch square Brass bars
- 2" inch square Brass bars
Available in 6" inch & 12" inch lengths options.
Custom lengths can also be supplied on order.
Brass Round Bars & Rods Mill stock
- 1/4" inch Round Brass Rods
- 1/2" inch Round Brass Rods
- 1" inch Round Brass Rods
- 3/8" inch Round Brass Rods
- 2" inch Round Brass Rods
Available in 6" inch & 12" inch lengths options. Custom lengths are also supplied on order
Comonc 8 Pcs 12 Inch 1/8 Brass Rod Brass Round Stock Lathe Bar Stock Kit Brass Rod Stock Solid Brass Rod 1/8 Inch in Diameter 12 Inch in Length,C27400
Product description
Item: 1/8 inch brass rod
Material: brass
Color: golden
Size: 30 cm/ 12 inch in length ，1/8 inch in diameter
Quantity: 8 pieces
Product characteristics:
Excellent cutting, drilling performance, high strength, good plasticity and
strong corrosion resistance.
Applications: Widely used in lathe processing,shaft pocket models, miniature
shafts, model frames, model boats, model cars, DIY crafts, etc.
- SMOOTH SURFACE:These brass rods have a smooth surface and are wrapped in professional metal wrapping paper. Even long-term storage, the brass rods are as bright as the new ones.
- EXACT SIZE: 30cm/12 inch in length ，1/8 inch in diameter
- FEATURES: The 1/8 brass round rod is a free cutting brass . It can be easily soldered and brazed and provides good resistance to corrosion.
- WIDE APPLICATION - This 1/8 inch brass round rod is suitable for DIY crafts, home decoration, electrical, engineering, education, static models, etc.
- BEST SERVICE - We are committed to providing each customer with the highest standard of customer service.If you encounter any problems when using brass rods, please contact us and we will resend a new one for you or give you a full refund.
1/4" x 1" C360 BRASS FLAT BAR 12" long Solid .250" Mill Stock H02 .25"x 1.00"
Stoner Metals
Product description
1/4" x 1" C360 BRASS FLAT BAR 12" long Solid .250" Mill Stock H02 .25"x 1.00"
- Solid Brass Bar Stock
- H02 (Half Hard) Temper
- Mill Finish
- Sourced and Assembled In the USA!
User questions & answers
| Question: | Can this be cut out with a cnc router |
| Answer: | YES---VERY WELL--- |
| Question: | Does the brass polish well? Want to build brackets |
| Answer: | .250" or 1/4" |
| Question: | How thick is it |
| Answer: | Yes, it can be bent and shaped as any nonferrous metal. I use it for guards and pummels. |
| Question: | Can this bar be bent for a knife guard, a quillion |
| Answer: | (+-) 1mm is the normal tolerance in brass bars as these are fresh cut brass bars . |
24 Pieces Brass Round Rods Bar Assorted Diameter 1.5-8 mm for 100 mm Length Lead-Free Brass Rod for Drift Punches Various Shaft DIY Craft Model Plane Model Ship Model Cars
Hotop
Product description
24 Pieces brass round rods bar assorted diameter 1.5 - 8 mm for 100 mm length lead-free brass rod for various shaft DIY craft model plane model ship model cars
Feature: lead-free brass, no harm to human
Easy to store:
These solid brass rods are well wrapped in a plastic box, convenient to organize and pick, portable to keep these brass bars in order.
For multiple application:
These brass rod assortments are suitable for DIY craft, can be applied for various shaft DIY model plane, model ship, model cars and more.
Specifications:
Material: quality H59 brass
Color: golden
Size:
Diameter: 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm
Length: 100 mm
Package includes:
1 Piece 8 x 100 mm brass rod
2 Pieces 6 x 100 mm brass rod
3 Pieces 5 x 100 mm brass rod
3 Pieces 4 x 100 mm brass rod
6 Pieces 3 x 100 mm brass rod
3 Pieces 2.5 x 100 mm brass rod
3 Pieces 2 x 100 mm brass rod
3 Pieces 1.5 x 100 mm brass rod
- Reliable material: brass round rods bars are made of quality H59 brass, no harm to human
- Size: 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm in diameter, 100 mm in length, diverse sizes to meet your different needs
- Well wrapped: these solid brass rods are stored in a plastic box, convenient to organize and pick, portable to keep these brass bars in order
- Wide range of uses: these brass rod assortments are suitable for DIY craft, can be applied for various shaft DIY model plane, model ship, model cars and more
- What you get: comes with 1 piece 8 x 100 mm brass rod, 2 pieces for 6 x 100 mm, 3 pieces for 5 x 100 mm, 3 pieces for 4 x 100 mm, 6 pieces for 3 x 100 mm, 3 pieces for 2.5 x 100 mm, 3 pieces for 2 x 100 mm and 3 pieces for 1.5 x 100 mm
7 Pcs 9/64 inch Solid Brass Rods Lathe Bar Stock Kit Brass Round Stock 3.6 mm/ 9/64 inch in Diameter 12 Inch in Length,C27400
Comonc
Product description
Item: 9/64 inch brass rod
Material: brass
Color: gold
Size: 30cm/12 inch in length ，3.6mm/9/64 inch in diameter
Quantity: 7 PCS
Product characteristics:
Excellent cutting, drilling performance, high strength, good plasticity and
strong corrosion resistance.
Applications: Widely used in lathe processing,shaft pocket models, miniature
shafts, model frames, model boats, model cars, DIY crafts, etc.
- SMOOTH SURFACE - These brass rods have a smooth surface and are wrapped in professional metal wrapping paper. Even long-term storage, the brass rods are as bright as the new ones.
- BRASS ROD SIZE - 30cm/12 inch in length ,3.6mm/ 9/64 inch in diameter
- FEATURES - The 9/64 brass round rod is a free cutting brass . It can be easily soldered and brazed and provides good resistance to corrosion.
- WIDE APPLICATION - This 9/64 inch brass round rod is suitable for DIY crafts, home decoration, electrical, engineering, education, static models, etc.
- BEST SERVICE - We are committed to providing each customer with the highest standard of customer service.If you encounter any problems when using brass rods, please contact us and we will resend a new one for you or give you a full refund.
K & S Precision Metals 3406 Brass Tube, Square - 1/16, 5/32, 1/8, 5/32, 3/16, 7/32, 1/4 Rectangle - 3/32 x 3/16, 1/8 x 1/4, 5/32 x 5/16, 3/16 x 3/8, 11 Pieces per Pack, Made in The USA
K & S Precision Metals
Product description
This package contains the following: Square - 1/16, 5/32, 1/8, 5/32, 3/16, 7/32, 1/4 Rectangle - 3/32 x 3/16, 1/8 x 1/4, 5/32 x 5/16, 3/16 x 3/8 (11 pieces per pack)
- SIZE: Square: 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4 O. D. X . 014" Wall Thickness X 12" Long / Rectangle: 3/32 x 3/16, 1/8 x 1/4, 5/32 x 5/16, 3/16 x 3/8 O. D. X . 014" Wall Thickness X 12" Long
- VERSATILE USES: hobby/craft, home improvement, DIY, Electrical, woodworking, engineering, education, static models, prototyping, puppetry and more.
- HIGH-QUALITY MATERIAL: Precision brass tubing, ASTM B135, Alloy 260, 1/2-3/4 hard, mill finish
- Total of 11 pieces
Latest Reviews
View all
Chest Creams
- Updated: 11.02.2023
- Read reviews
100 Silk Pillowcases
- Updated: 03.05.2023
- Read reviews
Diet Tea
- Updated: 08.04.2023
- Read reviews
Heart Monitor For Running
- Updated: 04.06.2023
- Read reviews
Power Inverters With Car Batteries
- Updated: 22.03.2023
- Read reviews