13 best industrial fire hose nozzles

Product description

◆Thermoplastic 2" NPSH nozzle attached to 2x 2" NPSH aluminum female camlock

◆Maximum operating pressure - 100psi. Approximate gallons per minute (GPM) - 60. Approximate distance - 70 feet

◆NH / NST:  The most common thread type in use by fire departments today is NST or National Standard Thread. NST also goes by the initials NH or National Hose. It can even be referred to as NHT or National Hose Thread. But NST or NH is more common these days. NH = NST.

◆NPSH:  National Pipe Straight Hose (NPSH) or Iron Pipe Thread (IPT) has the same threads per inch (TPI) as National Pipe Tapered (NPT) but the thread does not taper. NPSH is a straight thread and seals by a gasket in the female coupling which allows for a swivel, just like NH / NST, which make both ideal for hose couplings. Warning - It will NOT thread into a female NPT pipe. For example, a male NPSH coupling will NOT thread into a female metal or pvc pipe.

◆NPT: National Pipe Tapered is common in plumbing and some industrial uses. Sometimes referred to as pipe thread because PVC pipe and schedule 40 pipe are typically threaded in NPT. As its name implies this is a tapered thread so that the outside diameter of the male (ODM) gets smaller towards the end of the fitting and the inside diameter of the female narrows with depth. As the two fittings are threaded together the opposite tapers force thread friction and makes the seal without the use of a gasket.

• Thermoplastic 2 inch nozzle with NPSH threads attached to 2 x 2 inch aluminum female / male camlock with NPSH threads
• Adjusts from straight stream to fog for multipurpose use. Maximum 100 psi pressure (water only)
• Camlock Material - Aluminum. Brass stem of nozzle for resistance to corrosion
• Provides consistent volume at any spray angle
• This nozzle will only connect to a 2" male camlock hose

• Adjusts from straight stream to fog for multipurpose use
• Polycarbonate for resistance to high temperature and impact. Brass stem for resistance to corrosion
• 1-1/2" (38 mm) inlet for attaching to a fire hose,both NST/NH and NPSH threads are available
• If you need NPSH thread, please refer to diffrent ASIN
• This nozzle could be also for garden or green house applications, dust suppression, and evaporate cooling

User questions & answers

Question:	is the nozzle adjustable flow
Answer:	Yes. It's a 100% tamarind. The ingredients tamerind and water because water is present in tamarind.
Question:	Does this come with gasket
Answer:	We use seedless pulp however occasionally some seeds will pass through the system. These get ground up also.
Question:	can you get an adapter to make it fit a garden hose
Answer:	We do not add any salt to this product. If there is any sodium it is a naturally occurring from the fruit of tamarind.
Question:	Can i use a standard 1.5 npt male thread to connect this nozzle
Answer:	I had no idea so I did a search and found this recipe at https://www.epicurious.com/recipes/food/views/sparkling-tamarind-tea-366371. It calls for 3 black tea bags and 1 tablespoon of tamarind paste. I would say yes to your question if this is the type of tea you want to make. But if the recipe you want to make calls for tamarind pulp I would say no because this is definitely a thick paste. I hope this helps!

Product features

1-1/2" NH / NST female side will only connect to a male 1-1/2" NH / NST

If you need 1-1/2" NPSH nozzle, this 1-1/2" NST nozzle will be too big for your hose. Please check the thread of your hose before purchasing this item.

NH / NST: The mostcommon thread type in use by fire departments today is NST or National Standard Thread. NST also goes by the initials NH or National Hose. It can even be referred to as NHT or National Hose Thread. But NST or NH is more common these days. NH = NST.

NPSH: National Pipe Straight Hose (NPSH) or Iron Pipe Thread (IPT) has the same threads per inch (TPI) as National Pipe Tapered (NPT), but the thread does not taper. NPSH is a straight thread and seals by a gasket in the female coupling which allows for a swivel, just like NH / NST, which make both ideal for hose couplings. Warning - It will NOT thread into a female NPT pipe. For example, a male NPSH coupling will NOT thread into a female metal or pvc pipe.

Brass stem for resistance to corrosion

Polycarbonate for resistance to high temperature and impact

Adjusts from straight stream to fog for multipurpose use

Product description

◆Thermoplastic 2" NPSH nozzle attached to a 2" NPSH aluminum female cam lock

◆Maximum operating pressure - 100psi. Approximate gallons per minute (GPM) - 60. Approximate distance - 70 feet

◆NH / NST:  The most common thread type in use by fire departments today is NST or National Standard Thread. NST also goes by the initials NH or National Hose. It can even be referred to as NHT or National Hose Thread. But NST or NH is more common these days. NH = NST.

◆NPSH:  National Pipe Straight Hose (NPSH) or Iron Pipe Thread (IPT) has the same threads per inch (TPI) as National Pipe Tapered (NPT) but the thread does not taper. NPSH is a straight thread and seals by a gasket in the female coupling which allows for a swivel, just like NH / NST, which make both ideal for hose couplings. Warning - It will NOT thread into a female NPT pipe. For example, a male NPSH coupling will NOT thread into a female metal or pvc pipe.

◆NPT: National Pipe Tapered is common in plumbing and some industrial uses. Sometimes referred to as pipe thread because PVC pipe and schedule 40 pipe are typically threaded in NPT. As its name implies this is a tapered thread so that the outside diameter of the male (ODM) gets smaller towards the end of the fitting and the inside diameter of the female narrows with depth. As the two fittings are threaded together the opposite tapers force thread friction and makes the seal without the use of a gasket.

• Thermoplastic 2 inch nozzle with NPSH threads attached to a 2 inch aluminum female camlock with NPSH threads
• Adjusts from straight stream to fog for multipurpose use. Maximum 100 psi pressure (water only)
• Cam lock Material - Aluminum. Brass stem of nozzle for resistance to corrosion
• Provides consistent volume at any spray angle
• This nozzle will only connect to a 2" male camlock hose

Product description

◆Thermoplastic 1-1/2" NPSH nozzle attached to a 1-1/2" aluminum female camlock

◆Maximum operating pressure - 100psi. Approximate gallons per minute (GPM) - 60. Approximate distance - 60 feet

◆NH / NST:  The most common thread type in use by fire departments today is NST or National Standard Thread. NST also goes by the initials NH or National Hose. It can even be referred to as NHT or National Hose Thread. But NST or NH is more common these days. NH = NST.

◆NPSH:  National Pipe Straight Hose (NPSH) or Iron Pipe Thread (IPT) has the same threads per inch (TPI) as National Pipe Tapered (NPT) but the thread does not taper. NPSH is a straight thread and seals by a gasket in the female coupling which allows for a swivel, just like NH / NST, which make both ideal for hose couplings. Warning - It will NOT thread into a female NPT pipe. For example, a male NPSH coupling will NOT thread into a female metal or pvc pipe.

◆NPT: National Pipe Tapered is common in plumbing and some industrial uses. Sometimes referred to as pipe thread because PVC pipe and schedule 40 pipe are typically threaded in NPT. As its name implies this is a tapered thread so that the outside diameter of the male (ODM) gets smaller towards the end of the fitting and the inside diameter of the female narrows with depth. As the two fittings are threaded together the opposite tapers force thread friction and makes the seal without the use of a gasket.

• Thermoplastic 1.5 inch nozzle with NPSH threads attached to a 1.5 inch aluminum female camlock
• Adjusts from straight stream to fog for multipurpose use. Maximum 100 psi pressure (water only)
• Camlock Material - Aluminum. Brass stem of nozzle for resistance to corrosion
• Aluminum 1 1/2" camlock and groove nozzle has the option of a shut-off, fog pattern or a straight stream. Heavy-duty 1 1/2 inch nozzle with NPSH thread
• Provides consistent volume at any spray angle. This nozzle will only connect to a 1-1/2" male camlock hose

Product description

◆Female 2" NPSH will only connect to a male 2" NPSH/NPT

◆Inside diameter of 2" NPSH nozzle is 2.24"

◆NH / NST:  The most common thread type in use by fire departments today is NST or National Standard Thread. NST also goes by the initials NH or National Hose. It can even be referred to as NHT or National Hose Thread. But NST or NH is more common these days. NH = NST.

◆NPSH:  National Pipe Straight Hose (NPSH) or Iron Pipe Thread (IPT) has the same threads per inch (TPI) as National Pipe Tapered (NPT) but the thread does not taper. NPSH is a straight thread and seals by a gasket in the female coupling which allows for a swivel, just like NH / NST, which make both ideal for hose couplings. Warning - It will NOT thread into a female NPT pipe. For example, a male NPSH coupling will NOT thread into a female metal or pvc pipe.

◆NPT: National Pipe Tapered is common in plumbing and some industrial uses. Sometimes referred to as pipe thread because PVC pipe and schedule 40 pipe are typically threaded in NPT. As its name implies this is a tapered thread so that the outside diameter of the male (ODM) gets smaller towards the end of the fitting and the inside diameter of the female narrows with depth. As the two fittings are threaded together the opposite tapers force thread friction and makes the seal without the use of a gasket.

• Thermoplastic 2 inch nozzle adjusts from straight stream to fog for multipurpose use
• Maximum 100 psi pressure (water only). Provides consistent volume at any spray angle
• Polycarbonate for resistance to high temperature and impact. Brass stem for resistance to corrosion
• Thermoplastic constant flow fog nozzle. Approximate gallons per minute (GPM) - 60. Approximate distance - 70 feet
• If you need 2" NH /NST nozzle, this 2" NPSH nozzle will be too small for your hose. Please check the thread of your hose before purchasing this item

User questions & answers

Question:	Can the water be shut off at the nozzle
Answer:	Kind of a weird request. As the Garden hose is typically 3/4 at best and the spray nozzle is 1.5. The garden hose is typically a GHT thread and the Fire Nozzle a NH thread. You would need to look for a GHT Male to NH Female. the real problem is water flow, your garden hose can't flow enough water to keep a pressure stream for the nozzle.
Question:	Has anyone used this on a 2" Harbor Freight hose that can be used with their 2" trash pump? Thanks
Answer:	This nozzle could be only connect to 1.5''NH/NST thread. Your 1.5 npt male thread could be connect to other model ASIN B074GXM48V

• If you need 1" NPSH nozzle, this 1" NST / NH nozzle will be too big for your hose. This is 1 inch NST nozzle, not 1.5" nozzle, not NPSH thread nozzle
• 1" NH / NST female side will only connect to a male 1" NH / NST
• Recommended for fire hose and fire hose racks for lined or unlined fire hose
• Excellent watering equipment. 1" cast brass adjustable fog nozzle
• Capable of complete shutoff, straight stream or any degree of conical fog

User questions & answers

Question:	what psi is this rated for
Answer:	yes, you could actually adjust to off.
Question:	How can I get a replacement rubber ring. Mine came off and got lost
Answer:	Came with gasket where it hooks up to keep from leaking. Yes

Product features

1" NH / NST female side will only connect to a male 1" NH / NST

If you need 1" NPSH nozzle, this 1" NH / NST nozzle will be too big for your hose. Please check the thread of your hose before purchasing this item.

NH / NST: The most common thread type in use by fire departments today is NST or National Standard Thread. NST also goes by the initials NH or National Hose. It can even be referred to as NHT or National Hose Thread. But NST or NH is more common these days. NH = NST.

NPSH: National Pipe Straight Hose (NPSH) or Iron Pipe Thread (IPT) has the same threads per inch (TPI) as National Pipe Tapered (NPT), but the thread does not taper. NPSH is a straight thread and seals by a gasket in the female coupling which allows for a swivel, just like NH / NST, which make both ideal for hose couplings. Warning - It will NOT thread into a female NPT pipe. For example, a male NPSH coupling will NOT thread into a female metal or pvc pipe.

Excellent watering equipment. 1" cast brass adjustable fog nozzle

• Recommended for fire hose and fire hose racks for lined or unlined fire hose
• Capable of complete shutoff, straight stream or any degree of conical fog

Product description

Product Feature

Material - Brass

Size - 1 inches

Threads – NH/NST

Approximate Distance - 60 feet

Maximum operating pressure - 100psi

Approximate Gallons Per Minute (GPM) – 75

Positions - Fog, straight stream and off



NOTE: This nozzle will only connect to a 1" NH/NST hose, not for NPSH/NPT thread

◆NH / NST:  The most common thread type in use by fire departments today is NST or National Standard Thread. NST also goes by the initials NH or National Hose. It can even be referred to as NHT or National Hose Thread.

But NST or NH is more common these days. NH = NST.

◆NPSH:  National Pipe Straight Hose (NPSH) or Iron Pipe Thread (IPT) has the same threads per inch (TPI) as National Pipe Tapered (NPT) but the thread does not taper. NPSH is a straight thread and seals by a gasket

in the female coupling which allows for a swivel, just like NH / NST, which make both ideal for hose couplings. Warning - It will NOT thread into a female NPT pipe. For example, a male NPSH coupling will NOT

thread into a female metal or pvc pipe.

◆NPT: National Pipe Tapered is common in plumbing and some industrial uses. Sometimes referred to as pipe thread because PVC pipe and schedule 40 pipe are typically threaded in NPT. As its name implies this is a tapered

thread so that the outside diameter of the male (ODM) gets smaller towards the end of the fitting and the inside diameter of the female narrows with depth. As the two fittings are threaded together the

opposite tapers force thread friction and makes the seal without the use of a gasket.

• Fitment: Fit for standard 1" NH/NST Male thread,not for NPSH/NPT thread
• Control: By rotating, control on and off, and adjust spray size
• Material: brass nozzle, very durable, and adjustable.
• Application: For fire fighter fireman station garden, also for green house applications, dust suppression, and evaporate cooling
• Warranty：We have confidence in our products. We offer a 3-year warranty. Whenever there is any problem with the product, please contact us directly, we will provide you with quality after-sales service immediately.

Product description

◆Female 1" NST/NH  will only connect to a male 1" NST/NH, not NPSH/NPT

◆NH / NST:  The most common thread type in use by fire departments today is NST or National Standard Thread. NST also goes by the initials NH or National Hose. It can even be referred to as NHT or National Hose Thread. But NST or NH is more common these days. NH = NST.

◆NPSH:  National Pipe Straight Hose (NPSH) or Iron Pipe Thread (IPT) has the same threads per inch (TPI) as National Pipe Tapered (NPT) but the thread does not taper. NPSH is a straight thread and seals by a gasket in the female coupling which allows for a swivel, just like NH / NST, which make both ideal for hose couplings. Warning - It will NOT thread into a female NPT pipe. For example, a male NPSH coupling will NOT thread into a female metal or pvc pipe.

◆NPT: National Pipe Tapered is common in plumbing and some industrial uses. Sometimes referred to as pipe thread because PVC pipe and schedule 40 pipe are typically threaded in NPT. As its name implies this is a tapered thread so that the outside diameter of the male (ODM) gets smaller towards the end of the fitting and the inside diameter of the female narrows with depth. As the two fittings are threaded together the opposite tapers force thread friction and makes the seal without the use of a gasket.

• This 1" NST/ NH fire nozzle will only connect to a 1" NST / NH hose, not NPSH /NPT hose
• Brass body with rubber bumper and brass stem
• Constant flow fog nozzle. Provides consistent volume at any spray angle
• For use up to 100 psi (water only); Approximate gallons per minute (GPM) - 36

Product description

◆Female 1.5" NPSH will only connect to a male 1.5" NPSH

◆Inside diameter of 1.5" NPSH nozzle is 1.77"

◆NH / NST:  The most common thread type in use by fire departments today is NST or National Standard Thread. NST also goes by the initials NH or National Hose. It can even be referred to as NHT or National Hose Thread. But NST or NH is more common these days. NH = NST.

◆NPSH:  National Pipe Straight Hose (NPSH) or Iron Pipe Thread (IPT) has the same threads per inch (TPI) as National Pipe Tapered (NPT) but the thread does not taper. NPSH is a straight thread and seals by a gasket in the female coupling which allows for a swivel, just like NH / NST, which make both ideal for hose couplings. Warning - It will NOT thread into a female NPT pipe. For example, a male NPSH coupling will NOT thread into a female metal or pvc pipe.

◆NPT: National Pipe Tapered is common in plumbing and some industrial uses. Sometimes referred to as pipe thread because PVC pipe and schedule 40 pipe are typically threaded in NPT. As its name implies this is a tapered thread so that the outside diameter of the male (ODM) gets smaller towards the end of the fitting and the inside diameter of the female narrows with depth. As the two fittings are threaded together the opposite tapers force thread friction and makes the seal without the use of a gasket.

• ◆Female 1.5" NPSH will only connect to a male 1.5 NPSH. 1-1/2" (38 mm) cast brass adjustable fog nozzle
• ◆Recommended for fire hose and fire hose racks for lined or unlined fire hose
• ◆Industrial constant flow fog nozzle. 1.5" NPSH Adjusts from straight stream to fog for multipurpose use.
• ◆Approximate gallons per minute (GPM) - 85. Maximum 100 psi pressure (water only)
• ◆If you need 1.5" NH /NST nozzle, this 1.5" NPSH nozzle will be too small for your hose. Please check the thread of your hose before purchasing this item

User questions & answers

Question:	I need an adapter for a regular garden home connection
Answer:	Yes. This is exactly what I bought it for. It fits perfectly and works great.

Product description

NPSH: National Pipe Straight Pipe (NPSH) orIron Pipe Thread (IPT) thread per inch (TPI) is the same as National PipeTapered (NPT), but the thread will not taper. NPSH is straight threaded and issealed by a gasket in an internally threaded joint, which can be rotated, justlike NH/NST, both of these joints are very suitable for hose joints. Warning-itwill not screw into the NPT internally threaded tube.

NH/NST: The most common thread type used bythe fire department is NST or national standard thread. NST also uses theabbreviation NH or National Hose. It can even be called NHT or national hose.However, nowadays, NST or NH is more common. NH = NST.

• High quality material: The Fire Hose Spray Nozzle made of brass.
• Size: 1-1 / 2" NH / NST thread internal thread nozzle.
• Widely used: For lined or unlined fire hoses and fire hose racks.
• Able to shut off completely, DC or conical fog of any degree.
• 100% Satisfied Service: Enjoy a smooth & frustration free experience with our 100% Satisfied Service in one Month.

Product description

Product Feature

Material - Plastic and Brass

Size - 2 inches

Threads – NPSH/NPT

Approximate Distance - 60 feet

Maximum operating pressure - 100psi

Approximate Gallons Per Minute (GPM) – 75

Positions - Fog, straight stream and off



NOTE: This nozzle will only connect to a 2" NPSH hose, not for NH/NST thread

◆NH / NST:  The most common thread type in use by fire departments today is NST or National Standard Thread. NST also goes by the initials NH or National Hose. It can even be referred to as NHT or National Hose Thread.

But NST or NH is more common these days. NH = NST.

◆NPSH:  National Pipe Straight Hose (NPSH) or Iron Pipe Thread (IPT) has the same threads per inch (TPI) as National Pipe Tapered (NPT) but the thread does not taper. NPSH is a straight thread and seals by a gasket

in the female coupling which allows for a swivel, just like NH / NST, which make both ideal for hose couplings. Warning - It will NOT thread into a female NPT pipe. For example, a male NPSH coupling will NOT

thread into a female metal or pvc pipe.

◆NPT: National Pipe Tapered is common in plumbing and some industrial uses. Sometimes referred to as pipe thread because PVC pipe and schedule 40 pipe are typically threaded in NPT. As its name implies this is a tapered

thread so that the outside diameter of the male (ODM) gets smaller towards the end of the fitting and the inside diameter of the female narrows with depth. As the two fittings are threaded together the

opposite tapers force thread friction and makes the seal without the use of a gasket.

• Fitment: Fit for standard 2" NPSH/NPT Male thread,not for NH/NSP thread
• Control: By rotating, control on and off, and adjust spray size
• Material: ABS housing, brass nozzle, very durable, and adjustable.
• Application: For fire fighter fireman station garden, also for green house applications, dust suppression, and evaporate cooling
• Warranty：We have confidence in our products. We offer a 3-year warranty. Whenever there is any problem with the product, please contact us directly, we will provide you with quality after-sales service immediately.

Product description

◆Female 1" NPSH will only connect to a male 1" NPSH

◆Inside diameter of 1" NPSH nozzle is 1.199"

◆NH / NST:  The most common thread type in use by fire departments today is NST or National Standard Thread. NST also goes by the initials NH or National Hose. It can even be referred to as NHT or National Hose Thread. But NST or NH is more common these days. NH = NST.

◆NPSH:  National Pipe Straight Hose (NPSH) or Iron Pipe Thread (IPT) has the same threads per inch (TPI) as National Pipe Tapered (NPT) but the thread does not taper. NPSH is a straight thread and seals by a gasket in the female coupling which allows for a swivel, just like NH / NST, which make both ideal for hose couplings. Warning - It will NOT thread into a female NPT pipe. For example, a male NPSH coupling will NOT thread into a female metal or pvc pipe.

• ◆Adjusts from straight stream to fog for multipurpose use
• ◆Polycarbonate for resistance to high temperature and impact. Brass stem for resistance to corrosion
• ◆Basic nozzle for fire hose rack units that are exposed and subject to pilferage
• ◆1 inch fire hose nozzle for extinguishing fires
• ◆If you need 1" NH /NST nozzle, this 1" NPSH nozzle will be too small for your hose. Please check the thread of your hose before purchasing this item

Product description

◆Thermoplastic 2" NPSH nozzle attached to a 2" NPSH aluminum female camlock fitting

◆Maximum operating pressure - 100psi. Approximate gallons per minute (GPM) - 60. Approximate distance - 70 feet

◆NH / NST:  The most common thread type in use by fire departments today is NST or National Standard Thread. NST also goes by the initials NH or National Hose. It can even be referred to as NHT or National Hose Thread. But NST or NH is more common these days. NH = NST.

◆NPSH:  National Pipe Straight Hose (NPSH) or Iron Pipe Thread (IPT) has the same threads per inch (TPI) as National Pipe Tapered (NPT) but the thread does not taper. NPSH is a straight thread and seals by a gasket in the female coupling which allows for a swivel, just like NH / NST, which make both ideal for hose couplings. Warning - It will NOT thread into a female NPT pipe. For example, a male NPSH coupling will NOT thread into a female metal or pvc pipe.

◆NPT: National Pipe Tapered is common in plumbing and some industrial uses. Sometimes referred to as pipe thread because PVC pipe and schedule 40 pipe are typically threaded in NPT. As its name implies this is a tapered thread so that the outside diameter of the male (ODM) gets smaller towards the end of the fitting and the inside diameter of the female narrows with depth. As the two fittings are threaded together the opposite tapers force thread friction and makes the seal without the use of a gasket.

• Thermoplastic 2 inch nozzle with NPSH threads attached to a 2 inch aluminum female camlock with NPSH threads
• Adjusts from straight stream to fog for multipurpose use. Maximum 100 psi pressure (water only)
• Camlock Material - Aluminum. Brass stem of nozzle for resistance to corrosion
• Provides consistent volume at any spray angle
• This nozzle will only connect to a 2" male camlock hose