14 best inline lab filters
Inline lab filters are specialized filtration devices used in laboratory and industrial settings to remove impurities and particulate matter from various liquids and gases. These filters are designed to be installed directly in the fluid or gas lines, allowing for continuous filtration during the transfer or processing of substances. Inline lab filters play a crucial role in ensuring the purity and quality of the final product in various scientific, industrial, and manufacturing applications.
Key features and aspects of inline lab filters include:
Filtration Mechanisms: Inline lab filters employ various filtration mechanisms, including mechanical, chemical, and physical processes, to separate contaminants from the fluid or gas being processed. Common filtration methods include microfiltration, ultrafiltration, and membrane filtration.
Materials: These filters are typically made from materials that are compatible with a wide range of chemicals and fluids. Common materials include stainless steel, polypropylene, PTFE (polytetrafluoroethylene), and ceramic.
Particle Size: Inline lab filters come in different pore sizes to accommodate various applications. The choice of filter pore size depends on the specific requirements of the process, such as the size and type of particles that need to be removed.
Applications: Inline lab filters are used in diverse applications across industries such as pharmaceuticals, biotechnology, food and beverage, chemical processing, water treatment, and more. They are essential for maintaining product quality, ensuring regulatory compliance, and safeguarding equipment downstream.
Configurations: Inline lab filters are available in various configurations, including cartridge filters, disc filters, capsule filters, and inline filter housings. The selection of the filter type depends on factors like flow rate, pressure, and the volume of fluid or gas to be filtered.
Maintenance: Regular maintenance and replacement of inline lab filters are essential to ensure optimal performance and prevent contamination issues. Many filters have a finite lifespan and must be replaced periodically.
Quality Control: In laboratory settings, inline lab filters are crucial for quality control and research applications.They help scientists and researchers ensure that samples and reagents are free from contaminants that could skew experimental results.
Regulatory Compliance: Industries with stringent quality and safety regulations rely on inline lab filters to meet compliance standards and ensure product consistency.
In summary, inline lab filters are indispensable components in laboratory and industrial processes where the purity of liquids or gases is of utmost importance. They come in various forms and materials, catering to a wide range of applications across different industries, ultimately contributing to the production of high-quality products and reliable research outcomes.
Below you can find our editor's choice of the best inline lab filters on the market
Whatman 6723-5000 Hepa-Vent Venting Filter Disc with Inlet 1/4" to 3/8" SB and Outlet 1/4" to 3/8" SB, 60 psi Maximum Pressure, 50mm Diameter (Pack of 10)
Whatman
Product description
The Whatman Hepa-Vent in-line venting disc filter features glass filter media strengthened by dual lamination with a tough polyester monofilament. Retains 99.97% of all particles = 0.3 µm in air inside a durable polypropylene housing. The feature high flow rates with low pressure drops across filter media, ensuring clean air passing in and out of vessels. They are suitable for particulate removal from air and gases, prefilter for suction or to serve gas inline filters. Repeatedly autoclavable at 121° C for 20 minutes (132° C max) and available in a variety of end-fitting configurations. Manufactured in clean room facilities under ISO Quality Systems. Repeatedly autoclavable at 121° C for 20 minutes (132° C max) for assured sterility. Each filter allows bi-directional flow. Depth filter design allows for high loading capacity. Prevents bacterial, algal or fungal contamination in fermentors or incubators. Ideal for tissue culture applications as well. Max Pressure: 60 psi (4.1 Bar) - Capsule. Biosafety: Pass USP Class VI. Filtration Area: 16 cm2. Fittings: Stepped Barb for 6-10mm 1/4 to 3/8 inch Tubing. Filter Diameter: 50mm. 10/Pack. Whatman #: 6723-5000.
- Hepa-Vent 50mm disc venting filter
- Inlet 1/4 to 3/8 inch stepped barb; outlet 1/4 to 3/8 inch stepped barb
- Laminated hydrophobically treated glass microfiber
- Suitable for particulate removal from air and gases; prefilter for suction or to serve gas inline filter
- Tissue culture applications
User questions & answers
| Question: | Have you whatman inlet 0,45um ptfe l |
| Answer: | we currently have 2 in stock ready to ship. Whatman 6723-5000 Hepa-Vent Venting Filter Disc with 50mm Diameter (Pack of 10) |
| Question: | Are they indivually wrapped/packed |
| Answer: | No. They don't come individually wrapped. However, their manual says they can withstand autoclaving in case you want them sterile. |
Whatman 6720-5001 Polydisc TF PTFE In-line Filter 0.1 Micron, 50 psi Maximum Pressure, 200 Flow Rate (Pack of 10)
Whatman
Product description
This Polydisc TF 50mm in-line filter device by Whatman has a pore size of 0.1µm. It features a PTFE membrane which is ideal for chemically aggressive solutions, reagents, and organic solvents. This lightweight unit is particularly suitable for protective vents and for in-line filtration and isolation applications. It is fully autoclavable for sterile applications and may be re-used multiple times. It is integrity testable via bubble point or water breakthrough pressure 'in situ' methods. It is biosafe and Lightweight at 11.5 grams; avoids the collapsing of tubing which can be caused by heavy filter devices. Pore Size: 0.1µm. 10/Pack. Whatman #: 6720-5001.
- Pore size: 0.1µm
- Fully autoclavable for sterile applications
- Integrity testable; biosafe and lightweight
- Features a PTFE membrane which is ideal for chemically aggressive solutions
- Pharmaceutical, biotech, laboratory, and electronics applications
Omicron 200050R PTFE Venting Filter Disc, 60 psi Maximum Operation Pressure, 50 mm, 0.2 µm Sterile, Individually Packed (Pack of 10)
Omicron
Product description
PTFE Venting Filter Disc, 60 psi Maximum Operation Pressure, 50mm, 0.2um Sterile (Individually Packed) Pack of 10.
User questions & answers
| Question: | I understand these filters are autoclavable. How many cycles can you autoclave them for and at what temperature? (i.e. ## cycles @ ## degrees |
| Answer: | Omicron Air Vent Filter maintains integrity after 60 autoclave, steam sterilization cycle at 121 degree Centigrade of 20 min at 15 psi. |
| Question: | Are these filters autoclavable |
| Answer: | Yes, these filters are autoclavable. |
| Question: | is this in stock. how quickly can it ship |
| Answer: | Thank you for your interest in Omicron products. The requested product Omicron 200050R is In-Stock and can be shipped out today via USPS.Best RegardsSales @ Omicron Scientific |
| Question: | How long do they last? When do they need to be replaced |
| Answer: | These are disposable Sterile Air Vent Filters. They can withstand multiple Autoclaving up to 60 times. Thank you Omicron Scientific |
General Pump 100647 Inline High-Pressure Filter, 100 Mesh Screen, Brass, 8.0 GPM 5000 Maximum psi
General Pump
Product description
The General Pump 100647 is an Inline High-Pressure Filter, 100 Mesh Screen, Brass. Its maximum operating gpm is 8.0 and its maximum psi is 5,000. Its materials include Brass, Stainless Steel, and Buna-N. The max Temp for this model is 200°F. The Inlet Connection is 1/4\" NPT-F and the Outlet Connection is 1/4\" NPT-M.
User questions & answers
| Question: | What about this is a "quick disconnect"? Also, is the male npt a swivel? A live swivel |
| Answer: | This filter is not a quick disconnect. The ad is incorrect. It is 1/4"NPT male X 1/4"NPT female. The male is not a swivel. |
General Pump 100622 Inline High-Pressure Filter, 100 Mesh Screen, Brass, 8.0 GPM, 5000 Maximum psi
General Pump
Product description
The General Pump 100622 is an Inline High-Pressure Filter, Quick Disconnect, 100 Mesh Screen, Brass. Its maximum gpm is 8.0 and its maximum psi is 5,000. Its materials include Brass, Stainless Steel, and Buna-N. The max Temp for this model is 200°F. The Inlet Connection is 1/4" NPT-M and the Outlet Connection is 1/4" NPT-M.
User questions & answers
| Question: | Is this filter serviceable? (Cleaned and reused |
| Answer: | The filter will disassemble for filter cleaning. |
Yield Lab 6 inch 440 CFM Duct Inline Fan with 6" Carbon Filter Ducting and Clamps
Yield Lab
Product description
Yield Lab 6 Inch 440 CFM Inline Duct Fan With 6 Inch Carbon Filter is the premiere fan and filter system for your indoor hydroponic needs. Enjoy a system that will not only keep your setup free of odor and stale air, but cool your grow room in the process. Yield Lab 6 Inch 440 CFM Air Duct Fan Vent System. CE Certified 2700 RPM and 440 CFM Frequency: 50/60Hz Moisture resistant - great for use in damp environment Extended collar and lip for easy duct hook-up Backward curved impeller to ensure quite operation possible Suitable for domestic, commercial and industrial applications Yield Lab 6 Inch Purifier Activated Charcoal Filter 6" Flange 20 " Tall Activated Carbon Charcoal Filter Maintenance Free Design Safe and Effective Operation Pre-filter Included
- HIGH PERFORMANCE FAN: If you are looking for a powerful yet compact fan, look no further! Boasting an optimum 440 CFM and 2700 RPM, you can insure proper circulation. With a balanced motor and lubricated ball bearings keep this fan will continuously run as long as you need it. Not to mention a solid metal construction and powder coat housing, this blower is built to last!
- QUALITY FILTER: Built with carbon charcoal and cotton pad design, this filter is perfect for your stale air needs! Enjoy a maintenance free design that requires no additional tedious work. With a life expectancy of 1.5 years, you can expect this item to last. So toss out your old gels, sprays or incense and pick up the Yield Lab 6” Charcoal Filter.
- PRE FILTER INCLUDED: As an added bonus, enjoy a free built in pre-filter to get optimal air purification!
- WIDE VARIETY OF APPLICATIONS: If you do not have a grow tent, do not fret as this system can be applied to many situations. These can include but are not limited to; Greenhouses, kitchens, bathrooms, grow rooms, and many other HVAC set ups. So if you have air filtration issue that needs to be fixed, this kit is for you!
- INCLUDED COMPONENTS: 1x Yield Lab 6 Inch Purifier Activated Charcoal Filter, 1x Yield Lab 6 Inch 440 CFM Air Duct Fan Vent System, 1x 6”x 16.5” Ducting, 2x 6” Duct Clamps
User questions & answers
| Question: | What size grow tent would you recomend |
| Answer: | This size fan is best for a 4x4 flower tent when used on the max setting, however I use mine in a 5x5 L.E.D. veg tent on low with great results so far. I would definitely recommend Yield Labs over Vivosun’s same sized fan. |
Harrison Labs FMOD Inline Rumble Subsonic Filter Crossover Pr 30Hz High Pass RCA
Product description
SOLD AS A PAIR, Many Frequencies Available - Contact us if you need help selecting the proper frequency. The Harrison Labs FMOD is an in-line active crossover simulator. FMOD's are passive so noise free & better than a much more expensive electronic crossover that requires power to operate. Frequencies available for every need such as: Subsonic filter, Subwoofer, Woofer, Midbass, Midrange, Tweeter, Super Tweeter, Horns and Ultrasonic filter Combine with other FMODs & traditional electronic crossovers for bandpass ranges or to change the slope and crossover frequency point Install in seconds by placing the FMOD in-line with the RCA patch cable running between the source (head unit/preamp/etc) and the amplifier Low Pass available Frequencies: 50, 70, 100, 150, 200, 500, 1000, 2500, 3500, 6500, 20K High Pass Available Frequencies: 20, 30, 50, 70, 100, 150, 200, 300, 500, 1000, 2500, 3500, 6500
- 12dB/Octave slope
- 24kt gold over brass construction
- 10 volts maximum RMS input
- One-year manufacturer warranty
- Made in the U.S.A
User questions & answers
| Question: | Are the bi-directional or does the signal have to enter a particular end |
| Answer: | Signal needs to enter female end with male end towards/in amplifier |
| Question: | I have a yamaha p-350 turntable with a grado g needle, kenwood ks-4000r receiver, and monitor radius 90 speakers. what fmod should i use |
| Answer: | I think the FMOD you use depends on what frequencies you want to go to these speakers. Do you have a subwoofer? If so, decide what you want going to the subwoofer, and what you want going to the monitors. As an example, I have the Audioengine A2's. They have a ~2inch subwoofer and claim to go down to something like 70 or 60HZ. I didn't want them to try because I have a subwoofer with a built in crossover on the plate amp from 20HZ to 180HZ. I bought the 100HZ FMODS and had another pair of FMODS that are 150HZ. I settled on using the 150HZ FMODS for that application. So that means I have the subwoofer reproduce frequencies below 150 and let the Audioengines handle the frequencies above that. This cleaned up the sound, and put less strain on the Audioengines to reproduce frequencies it couldn't really do well anyway. Of course 150HZ is where the cutoff is 12HZ per octave below 150HZ, it's not a sharp cutoff, it is gradual. I hope this helped. |
| Question: | Does the turntable rca cables plug into the female end of the filters and the male end of the filters plug into the phono inputs on my integrated amp |
| Answer: | Male end in or inline towards amp. Will not work properly if Male is towards signal source |
| Question: | Does the female end of the filter plug into the male end of the turntables rca cable and the male end of the filter plug into phone input |
| Answer: | Not sure about phono level. But will work on the input of amp that phono preamps outputs are going to. |
Phresh GL56701180 701180 Inline Carbon Filter, 8 in | 750 CFM, Silver science-lab-ph-meters, natural
Phresh
Product description
Carbon filters are no longer just for the ends of your air filtration system. Now they can be installed "in-line" like the lights and fans. It is the same Phresh Carbon Filter users' trust, built into an air conserving body. Point to point air movement and filtration. Phresh Inline Filters are state of the art carbon filters that practically scour the air to clean it of dust, foreign particulates, organic compounds and odors. Phresh Inline Filters are twice as light and last twice as long.
- Carbon filters are no longer just for the ends of your air filtration system
- Now they can be installed in-line like the lights and fans
- Phresh Inline Filters are twice as light and last twice as long
- Point to point air movement and filtration
- Phresh Inline Filters are state-of-the-art carbon filters that practically scour the air to clean it of dust, foreign particulates, organic compounds and odors
User questions & answers
| Question: | What kind of box it comes in |
| Answer: | Should come in a plain regular shipping box. Or at least that we do. No defining markings |
| Question: | can the filter be installed with a fan blowing through it instead of pulling air through it |
| Answer: | Should not matter as long as the flow direction is same as marked |
PALL 1119 Polycarbonate in-Line Filter Holder for 47 mm Filter Disc, Non-Sterile, 3.4 bar Maximum Operating Pressure, 5.8 cm Length x 6.4 cm Diameter
Pall
Product description
- Connections: 1⁄4 in. -18 FNPT in
- EFA (Effective Filtration Area): 9.6 cm²
- Quantity: 1 pkg
- Size (Metric): 47 mm filter holder
- Sterile: Non-sterile
- 121°C Maximum Operating Temperature
- 9.6 sm square Effective Filtration Area
- 3.4 Bar (340 KPA, 50 PSI) Maximum Operating Pressure
- Unit count: 1.0
User questions & answers
| Question: | Does it come with in/outlet connectors |
| Answer: | Yes, there are screw-in poly bayonet connectors for both the inlet and outlet. The inlet connector is shown in the picture. The outlet is the same. |
Whatman 6702-7500 Hepa-Cap 75 In-Line Venting Filter, 60 psi Maximum Pressure, Inlet 3/8" to 1/2", Outlet 3/8" to 1/2" Stepped Barb
Whatman
Product description
The Whatman Hepa-Cap 75 in-line venting filter features glass filter media strengthened by dual lamination with a tough polyester monofilament. Retains 99.97% of all particles = 0.3 µm in air inside a durable polypropylene housing. High flow rates with low pressure drops across filter media, ensuring clean air passing in and out of vessels. Suitable for particulate removal from air and gases and a prefilter for suction or to serve gas inline filters. Repeatedly autoclavable at 121° C for 20 minutes (132° C max) and available in a variety of end-fitting configurations. Manufactured in clean room facilities under ISO Quality Systems. Repeatedly autoclavable at 121° C for 20 minutes (132° C max) for assured sterility. Each filter allows bi-directional flow. Depth filter design allows for high loading capacity. Prevents bacterial, algal or fungal contamination in fermentors or incubators. Ideal for tissue culture applications. Max Pressure: 60 psi (4.1 Bar) - Capsule. Biosafety: Pass USP Class VI. Filtration Area: 1,300cm2 (201 in sq). Fittings: 1/2 inch Stepped Barb. 1/Pack. Whatman #: 6702-7500.
- Hepa-Cap 75 in-line venting filter
- Inlet 3/8 to 1/2 inch stepped barb; outlet 3/8 to 1/2 inch stepped barb
- Glass filter media strengthened by dual lamination
- Suitable for particulate removal from air and gases; prefilter for suction or to serve gas inline filter
- Tissue culture applications
Disposable 3/16" Hose ID Hose Barb Inline Air Particle Disk Disc Filter
MettleAir
Product description
Please ensure that your tubing/hose inner diameter matches the Hose ID before ordering
Quantity: 1 (One) piece
Body Material: Nylon
Diaphragm Material: HDPE 4903
PSI Range: 1 - 150 PSI
Filter Element: 45-90 Micron
Phresh Inline Filter 6 in 500 CFM
Phresh
Product description
Carbon filters are no longer just for the ends of your air filtration system. Now they can be installed "in-line" like the lights and fans. It is the same Phresh Carbon Filter users' trust, built into an air conserving body. Point to point air movement and filtration. Phresh Inline Filters are state of the art carbon filters that practically scour the air to clean it of dust, foreign particulates, organic compounds and odors. Phresh Inline Filters are twice as light and last twice as long
- Carbon filters are no longer just for the ends of your air filtration system
- Now they can be installed in-line like the lights and fans
- It is the same Phresh Carbon Filter users trust, built in to an air conserving body
- Point to point air movement and filtration
- Phresh Inline Filters are state-of-the-art carbon filters that practically scour the air to clean it of dust, foreign particulates, organic compounds and odors
User questions & answers
| Question: | On average how often does the filter need to be changed? I do realize that there are variables that will affect longevity |
| Answer: | I generally change these every 12 to 18 months |
| Question: | What are the tiny black clips included in the box for |
| Answer: | They hang over the edge of the carbon filter flange to support fans that have a smaller diameter than the filter. |
| Question: | Was a prefilter and flange to be included in box? or does this not need a prefilter or flange? i did not receive either |
| Answer: | NO |
| Question: | can you use for air condictioner exaust |
| Answer: | yes, why wouldn't you be able to? It will slow the air flow down by 20 to 30 percent so just make sure your air conditioner is not being over worked. but it should be fine. good luck. |
Whatman 2609T Hepa-Cap 36 In-Line Venting Filter, 60 psi Maximum Pressure, Inlet 3/8" FNPT, Outlet 3/8" FNPT
Whatman
Product description
The Whatman Hepa-Cap 36 in-line venting filter features glass filter media strengthened by dual lamination with a tough polyester monofilament. Retains 99.97% of all particles = 0.3 µm in air inside a durable polypropylene housing. High flow rates with low pressure drops across filter media, ensuring clean air passing in and out of vessels. Suitable for particulate removal from air and gases and a prefilter for suction or to serve gas inline filters. Repeatedly autoclavable at 121° C for 20 minutes (132° C max) and available in a variety of end-fitting configurations. Manufactured in clean room facilities under ISO Quality Systems. Repeatedly autoclavable at 121° C for 20 minutes (132° C max) for assured sterility. Each filter allows bi-directional flow. Depth filter design allows for high loading capacity. Prevents bacterial, algal or fungal contamination in fermentors or incubators. Ideal for tissue culture applications. Max Pressure: 60 psi (4.1 Bar) - Capsule. Biosafety: Pass USP Class VI. Filtration Area: 625 cm2 (97 in2). Inlet: 3/8 inch FNPT. Outlet: 3/8 inch FNPT. 5/Pack. Whatman #: 2609T.
- Hepa-Cap 36 in-line venting filter
- Inlet 3/8 inch FNPT; outlet 3/8 inch FNPT
- Glass filter media strengthened by dual lamination
- Suitable for particulate removal from air and gases; prefilter for suction or to serve gas inline filter
- Tissue culture applications
User questions & answers
| Question: | Is this a single filter or a box or |
| Answer: | it's a box of 5 |
Pall 1109 In-line Filter Holder with Delrin Plastic Material, 25 mm Filter size, Delrin Plastic, Pack of 6
Pall Life Sciences
Product description
- Material: Delrin Plastic
- Type: Filter Holder
- Filter Size: 25mm
- Dimenssion: Length 2 cm (0.8 inch) & Diameter 3.5 cm (1.4 inch)
- Effective Filtration Area: 3.7 cm(square)
- Construction: Body/Caps: Delrin (acetal resin), Support Screen: Type 316 stainless steel, O-Ring: Viton, Hose Barb Adapters: Nylon
- Sterilization: Provided non-sterile. Autoclavable if desired at 121 - 123 degree celcius at 1.0 bar (100 kPa, 15 psi) for 15 - 20 min
- Maximum Operating Temperature: In Air: 85 degree celcius & In Water: 66 degree celcius
- Maximum Operating Pressure: 2.8 bar (280 kPa, 40 psi)
- Use: Filtration
Lightweight Filter Holder for Particulate Sampling
All images used are for illustrative purposes only and may not be an exact representation of the product. Pall Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications. If you require further assistance in product selection for your chosen application, please contact [email protected] or call 1-800-521-1520.
Latest Reviews
View all
M Wave Bicycle Water Bottle Holders
- Updated: 07.03.2023
- Read reviews
Coleman Cpu Water Coolers
- Updated: 27.02.2023
- Read reviews
Sony Running Headphones
- Updated: 13.06.2023
- Read reviews
Rubber Worms
- Updated: 26.03.2023
- Read reviews
Spanish Guitars
- Updated: 24.07.2023
- Read reviews