12 best glass fiber lab filters

Product description

Grade 934-AH: The fine particle retention of this popular grade is superior for its high retention efficiency at high flow rates and its high loading capacity. This is a smooth surface, high-retention borosilicate glass microfiber filter which withstands temperatures over 500 degree C. Used for determining total suspended solids in water, removal of turbidity, and filtration of bacterial cultures. Grade 934-AH is used for a wide range of laboratory applications. It is recommended for water pollution monitoring, cell harvesting, liquid scintillation counting, and air pollution monitoring. Properties: Fast, high loading. Particle retention in liquid (µm): 1.5. Particle retention rating at 98 percent efficiency. Filtration speed herzberg (s): 47. Basis weight(g/m sq): 64.

• Excellent fine particle retention
• Binder-free, high-grade borosilicate glass microfiber
• Available in a wide range of sizes
• High loading capacity
• Low fiber shedding
• Grade 934-AH Filter for Total Suspended Solids Analysis, 47 mm circle
• Borosilicate glass

Product description

HYDRATED WATER BEADS ARE THE FILTERS YOU NEVER KNEW YOU NEEDED

Experience the ultimate chill with YippyGroove water bead filters. These fun water beads may look like a fun kids toy but make no mistake - these round beads are most definitely for adults only.

They act as filtering screens in your water pipe or bowl to filter and cool down the smoke. It's absolutely essential that you hydrate these beads for at least 8 hours before use or overnight. After that, just pop a few hydrated water beads into your piece and get ready for a totally chill and far out smoking experience!

Notice them getting a bit dark and dirty? That's great news since it means they are doing their job to filter out and absorb ash, resin, and embers which not only makes for a better smoking experience, but an easier clean up too! Just toss them and put some new beads into water to prep them for their turn in the bowl.

YippyGroove water beads are the way to a cooler, smoother, and cleaner draw every time. They come in a rad Limited Edition stash tin that keeps them safe and prevents breakage so you're ready to chill anywhere anytime. They are also just fun to play with, so enjoy them however you like.

PRODUCT FEATURES

• Hydrated water beads for water pipes and bowls
• A fun and functional filtering piece
• Filters out ash and resin
• Helps evenly disperse heat for a cooler draw
• Contains 10 grams which yields 2 quarts

OUR PROMISE

YIPPYGROOVE is committed to the quality of our products and to offering the best customer service possible. If you have any issues with your order or product please contact us right away so that we can make sure you walk away a happy customer.

Product description

SEOH Syringe filters are purpose-built with features designed to bring the highest levels of performance and purity to your research. We incorporate a variety of membranes to offer separation and purification solutions for the majority of your laboratory needs. MS glass fiber syringe filter is designed for clarification of extremely viscous samples that may clog a membrane filter is not necessary. Moreover this product has a high contamination loading ability for high throughputs. Filtration Area(cm2)- 1.09. Housing Material- PP. Hold-Volume(?l) <20. Sample Volume(ml) <10. Connections (Inlet/Outlet)- Female Luer-Lok inlet and Male Luer slip outlet. Max Operating Pressure(psi)- 87. Filter Medium- Glass Fiber. Diameter(mm)- 13. Pore Size(?m)- 0.7. Sterile- No. Wettability- Hydrophilic. No Prefilter.

• Wettability- Hydrophilic
• Max Operating Pressure(psi)- 87
• Pore Size(?m)- 0.7
• No Prefilter
• Sample Volume(ml) <10

Product description

Tisch Brand SF14699 Glass Fiber Syringe Filter, 1.0um 25mm, 1/pk/100 per pack | Wettability: Hydrophobic | Maximum operating temperature: 180 Degrees C | Burst pressure (psi): 87 |

Product description

Binder Free Borosilicate Glass Fiber Filter, 1.2μm, 47mm Pack of 100.

User questions & answers

Product description

These GF/A glass microfiber filters offer fine particle retention and high flow rate, as well as good loading capacity. Used for high efficiency general purpose laboratory filtration, including water pollution monitoring of effluents, for filtration of water, algae and bacteria cultures, foodstuff analyses, protein filtration and radioimmunoassay of weak ß emitters. Recommended for gravimetric determination of airborne particulates, stack sampling and absorption methods of air pollution monitoring. Retention: 1.6µm. Diameter: 4.7cm. 100/Pack. Whatman #: 1820-047.

• Diameter: 4.7cm
• Grade GF/A; Retention: 1.6µm
• Fine particle retention; high flow rate; good loading capacity; used for high efficiency general purpose laboratory filtration
• Uses include water pollution monitoring of effluents, water filtration, algae and bacteria cultures, foodstuff analyses, protein filtration, radioimmunoassay of weak ß emitters
• Recommended for gravimetric determination of airborne particulates, stack sampling and absorption methods of air pollution monitoring

Product description

Labware, Consumables & Furniture. Advantec GA10047MM Grade GA100 Glass Fiber Filters; 47mm dia; 100/box. Manufactured by COLE-PARMER. Advantec brand products.

Product description

Offers a full range of glass microfiber filters manufactured from 100 percent pure borosilicate glass. Because of their intrinsic properties, glass microfiber filters have wide applications in many areas of laboratory analysis, especially when fine filtration and high loading capacity is required. Microfiber filters include environmental analysis for water, wastewater, testing of soils, air pollution and monitoring, research and process biochemistry, and gravimetric analysis involving ignition of samples. It is also found in the filtration of hot gases and liquids, and in pre-filtration. Laboratory analysis, 100 percent pure borosilicate glass, rapid flow rate, high loading capacity, chemical and thermal resistance (up to 500 degree C), long shelf life, brilliant white color reflecting more than 96 percent of visible light, custom cut. Standard Glass Microfiber Filters. Standard glass microfiber filters contain no binders or other additives that may cause interference to sensitive enzymatic or other chemical reactions. The unique characteristics of glass microfiber filters make its use particularly advantageous to laboratory filtration by enabling fast filtration of large volumes and difficult solutions without premature clogging. This popular grade offers finer particle retention and higher flow rate than traditional analytical filter papers. Grade 161 is used in general laboratory applications, cell harvesting, liquid scintillation counting, and in the monitoring of air and water pollution. Grade 161 is generally recommended for water pollution monitoring techniques for total suspended solids.

• Laboratory analysis
• 100 Percent pure borosilicate glass
• Rapid flow rate
• High loading capacity
• Long shelf life

Product description

Glass Fiber (GF) Syringe Filters 25mm Diameter 1.2μm Pore Size Pre-filtration Filters by Allpure Biotechnology 【PACK OF 100】

FEATURES:

1.Hydrophilic

2.High protein binding

3.High dirt holding capacity

4.High flow rate

5.Suitable for almost all solutions, and also the Gas/Air filtration.

APPLICATION:

1.Filtration of aqueous, organic and alcohol solutions, AIR/GAS filtration.

2.Analytical sample preparation, HPLC

3.Clarification

4.Environmental samples

5.Food analysis

PACKAGE:

100pcs * Syringe Filter With Glass Fiber 25mm  1.2μm

Filter Medium: Glass Fiber Filter

Diameter(mm): 25

Pore Size(μm):1.2

Wettability: Hydrophilic

Sterile: No

Filtration Area(cm²): 3.9

Housing Material: Medical grade PP

Volume Throughput(ml): <100

Holdup-Volume(μl): <100

Connections (Inlet/Outlet): Female Luer Lock inlet and Male Luer slip outlet

Max Operating Pressure(psi): 7 Bar (100PSI)

Max Operating Temperature(℃): 80 

Qualifications of our factory:

* A world class manufacturing facility, Class 10,000cleanroom.

* ISO 9001, ISO13485 certificated, CE certificated.

* Products quality achieved by Japanese quality controlsystem during production.

* Cost-effective, state-of-the-art production technology.

• [CASE OF 100pcs] Syringe Filter with Glass Fiber (GF) membrane 1.2μm Pore Size filter in 25mm Diameter Polypropylene (PP) housing.
• 25mm diameter syringe filters designed to filter 10-100 ml, with 3.9cm² big Effective Filtration Area.
• Glass Fiber filters with High Flow Rate, Large Through-put, High dirty holding capacity, good chemical resistance, could both treat the Hydrophilic and Hydrophobic solutions, and also the Gas/Air filtration.
• The special 0.7μm usually used for Separation and filtration of Protein solutions, and also the HPLC pre-filtration, and the particles analysis. For 1.2μm usually used for collection of Protein solutions, cells, and also the environment analysis, such as the water filtration and water quality monitoring and testing.
• We will provided 30 days after-sales protection with a new replacement or money back.

Product description

Grade 934-AH: The fine particle retention of this popular grade is superior for its high retention efficiency at high flow rates and its high loading capacity. This is a smooth surface, high-retention borosilicate glass microfiber filter which withstands temperatures over 500 degree C. Used for determining total suspended solids in water, removal of turbidity, and filtration of bacterial cultures. Grade 934-AH is used for a wide range of laboratory applications. It is recommended for water pollution monitoring, cell harvesting, liquid scintillation counting, and air pollution monitoring. Properties: Fast, high loading. Particle retention in liquid (µm): 1.5. Particle retention rating at 98 percent efficiency. Filtration speed herzberg (s): 47. Basis weight(g/m sq): 64.

• 100 pike
• 9347AH
• Whitman
• Package Dimensions: 11.938 L x 1.524H x6.35W(centimeters)

Product description

Glass Fiber Syringe Filter 25mm, 1.6um Non-Sterile Pack of 100.

Product description

The fine particle retention of this popular grade is superior for its high retention efficiency at high flow rates and its high loading capacity. This filter is a smooth surface, high retention borosilicate glass microfibre which withstands temperatures over 500°C. Specified in Standard Methods 2540D for determining total suspended solids in water, removal of turbidity and filtration of bacterial cultures. Grade 934-AH is used for a wide range of laboratory applications. It is recommended for water pollution monitoring, cell harvesting, liquid scintillation counting and air pollution monitoring. Retention: 1.5µm. Diameter: 4.25cm. 100/Pack. Whatman #: 1827-042.

• Diameter: 4.25cm; retention: 1.5µm
• Grade 934-AH; used for a wide range of laboratory applications; fine particle retention is superior for its high retention efficiency at high flow rates and its high loading capacity
• This filter is a smooth surface, high retention borosilicate glass microfibre which withstands temperatures over 500°C
• Specified in Standard Methods 2540D for determining total suspended solids in water, removal of turbidity and filtration of bacterial cultures
• Recommended for water pollution monitoring, cell harvesting, liquid scintillation counting and air pollution monitoring