13 best paslode framing nailers

Product description

The cordless XP framing nailer system is designed to deliver 15% more power to increase productivity. Less standing nails and better drive performance into harder woods means you can put your hammer away and let this cordless nailer do it all. Plus, the new Paslode framing fuel with all season formula lets you keep working in temperatures down to 14⁰F when compressor hoses are freezing. The lightweight Paslode cordless XP framing system offers the nailer, nails, and fuel so you enjoy the power to drive non-stop nailing all day, every day.

• Increased Productivity - Drives nails flush in LVL and other hardwoods that remodelers encounter.
• All Season Formula - Works in temperatures down to 14°F.
• Lightweight - 7.2lbs. for better comfort and control while working overhead or in tight spaces.
• Guaranteed Durability 50% Longer Run-time with 7V Li-ion Battery for up to 9,000 nails per charge.
• Compact Design: Fits between 16" o.c. studs, joists and roof trusses.

User questions & answers

Question:	Dumb question: is the charger included (no mention specifically of same
Answer:	This framing nail does not work with plastic collated nails. This model requires clip head or offset round paper collated nails. If you need the one that uses round head plastic collated nails, you will need model NR1890DR or NR1890DRS.
Question:	What gas cart is used
Answer:	This tool is not made in the USA.
Question:	is the nails for this gas nails the same as the air nailer? i will be using both together
Answer:	First, a reminder that this version of the nailer is only made to shoot papertape nails, 30-34 degree. If the nails you have are trul plastic collated them they are 21 degree and will cause damage. After making sure you have put in the correct nails, there are two buttons right by the bottom of your hand when holding the tool. One is on/off, and the other changes from sequential mode to bump mode. Press and hold the on button till a green light comes on, then operate.
Question:	What is the largest length nail that can be used with this gun? I'll be doing some floor plates in a remote location, so probably need at least
Answer:	In most cases you shouldn't have any problems with this.

Product description

Paslode PowerMaster Plus framing nailer system will allow you to have the job done in no time. Heavy-duty jobs require a heavy-duty nailer with a powerful performance in a lightweight design. That's why the pros turn to the proven performance, durability and driving power only a Paslode pneumatic framing nailer can provide. This low-recoil nailer offers a center of gravity close to the trigger for great balance and less arm fatigue. When used with Paslode framing nails, this nailing system's heavy-duty power can frame walls faster, helping get jobs done on time, every time.

The Paslode F-350S PowerMaster Plus 30-Degree Framing Nailer is a reliable workhorse that no jobsite should be without. Offering an unmatched combination of power, comfort, and durability, this heavy-duty pneumatic nailer is the perfect tool for framers, general contractors, custom homebuilders, and remodelers. Delivering more than 10% more power-per-pound than the competition, the PowerMaster Plus easily drives nails through engineered lumber, so it will make short work of everything from framing and sheathing to fence and deck construction.

The F-350S PowerMaster Plus 30-Degree Framing Nailer At a Glance: Drives 2" to 3-1/2" 30-degree nails into tough lumber Compact size fits between 16" studs, joists, and rafters On-tool depth of drive adjustment Balanced for premium performance 1-year limited warranty on housing and cap parts

Center of gravity is close to the trigger for optimal balance.

Compact size easily fits between 16" joists, rafters, and on-center studs.

Professional-Grade Tool Simplifies Framing Jobs

Ideal for professional framing work, the PowerMaster Plus drives 2" to 3-1/2" 30-degree clipped and full-head papertape nails with .113" - .131" diameters in engineered lumber, so you can handle decking, sub-assembly blocking, sheathing, and trussing of all types. And when you're tackling a big job, you'll be grateful for the PowerMaster Plus's high-capacity one-piece aluminum magazine, which holds up to 84 nails (two strips).

Sequential Operation for Greater Efficiency

With the PowerMaster Plus you can choose either manual or sequential operation and drive up to 12 nails per second--the barrel-shaped nose will ensure an easy line of sight when nailing. To keep things simple, a durable work contact element adjusts on the tool--not the compressor--for precise depth of drive, so you'll be sure to get the right depth for the job. To top it off, the contact element is specially designed to securely grip wood during toenailing.

Big Power in a Compact Package

Weighing just 8.4 pounds and operating at 80-120 psi (5.5-8.3 bar), the PowerMaster Plus delivers over 10% more power per pound than the competition. Offering all the muscle you need to drive through engineered lumber. This tool is surprisingly easy to handle.

To save you time and energy, the PowerMaster Plus features an ergonomic design that places the center of gravity close to the trigger, providing optimal balance and the lowest recoil of a tool of its size. And with a soft-grip handle, it's comfortable to hold, even during all-day jobs.

Incredibly compact, the PowerMaster Plus has a height of just 13.3", so it will easily fit between 16" joists, rafters, and on-center studs. A rafter hook--which is located on the magazine and can be moved out of the way when it's not needed--makes it easy to hang the PowerMaster Plus on your tool belt, ladder, or rafter.

For further ease of use, this pneumatic nailer features an adjustable air-deflector cap and a main valve that improves airflow and performance over a wide range of operating conditions. A bolt-on-end plug makes for quick service and secure compressor attachments.

The PowerMaster Plus is backed by a 90-day limited warranty on wear parts, a six-month limited warranty on magazine parts, and a one-year limited warranty on housing and cap parts.

About Paslode: Providing Professionals with Innovative Solutions

With more than 70 years of experience, Paslode provides the standard by which other pneumatic and cordless fastening systems are measured. With its goal to provide professional users with high-quality fasteners and fastening tools, Paslode has achieved many industry firsts and innovations, including powerful tools that drive through the toughest woods--even LVL--and fuel-cell batteries that save time and energy.

What's in the Box

Nailer; bump fire trigger; reducing bushing; hex wrench (on tool); safety glasses; and owner' s manual.

From the Manufacturer

Paslode F-350S PowerMaster Plus™ Framing Nailer #501000 drives both Clipped Head nails (2" - 3 1/2") and RounDrive nails (2" - 3 1/4"). The Paslode PowerMaster Plus™ tool offers all the power needed to drive into engineered lumber, yet is still comfortable to use. Features of the Paslode PowerMaster Plus™ include the Overmolded Grip, for increased durability and user comfort, the Rafter Hook, making it easy to hang the nailer on a tool belt or on a wood structure and a Ruler on the magazine, allowing for quick measurements without using a tape. The Paslode PowerMaster Plus™ offers an Adjustable Work Contacting Element, a Depth of Drive adjustment on the tool rather than at the compressor saving time and energy. The rugged design of the Paslode PowerMaster Plus™ has stood up to job site and lab testing in heat, humidity and freezing temperatures while the ergonomic design places the center of gravity closer to the trigger, providing better balance and offers the lowest recoil for a tool of its size. Use the Paslode PowerMaster Plus™ tool for: Framing, Wall Sheathing, Roof Sheathing, Floor Decking, Blocking Sub-Assemblies.

• Great Maneuvering - Low-recoil offers a center of gravity close to the trigger for great balance and less arm fatigue.
• Powerful Performance - Heavy duty power helps frame walls faster - drives nails into the hardest woods, even LVL. Works with fewer jams or misfires.
• Compact - Its size fits between 16" o.c. studs, joists, and rafters.
• Convenient Design - Soft grip handle provides comfort and rafter hook moves out of the way when not in need.
• Versatile Application - The Paslode F350S framing nailer is great for framing, wall sheathing, roof sheathing, floor decking and more.

User questions & answers

Question:	I understand this does not come with any air fittings, so what are people using? 1/4" fittings with 3/8" hoses or 3/8" fittings with 1/2" hoses
Answer:	This comes with s reducer bushing which I used and am using 1/4" fitting and 1/4" hose without any issues.
Question:	Is any of the paslode make for plastic collated nails
Answer:	No. All paper.
Question:	Nail gun misfires why
Answer:	When you load nails into the magazine, don't let the magazine slide ram into the nails. It seems a lot of people think it is ok to release the slide at the bottom without guiding it with there hand. The speed and momentum of the slide, unattended will crush the paper back between the nails and cause misalignment when it reaches the firing mechanism. Which results in many misfires. Straight nail magazines will misfire much less.
Question:	Can this be used for baseboards or doing cabinets
Answer:	The smallest nail is 2" x .113 -- definitely not for cabinets or any finish work.....

Product description

Paslode Pneumatic Compact Framing Nailer is designed specifically with remodelers in mind. Get the access and maneuverability you need in tight spaces with this lightweight, yet powerful, pneumatic nailing system. When used with Paslode nails, this nailer experiences fewer jams and misfires which means less downtime. The Paslode Compact Framing Nailer System makes remodeling easier.

• Lightweight - Lightest framing nailer ever - only 5.9 lbs- for less fatigue and more control when working overhead and in tight spaces.
• Great Maneuverability - Fits easily into the tightest spaces such as between 16" o.c. studs.
• Increased Productivity - By-pass follower provides quick 2-step re-loading.
• Remodeler'S Fit - Great for sheathing, blocking, and moving interior walls.
• Precise - Fewer Jams And Misfires When Used With 30° Paslode Framing Nails: 2" to 3-1/4" in length, .113" to .131" shank diameter.

User questions & answers

Question:	can you get a plastic or rubber tip on it if you use it on cedar decking
Answer:	Product shown is a full size framing nailer.with no info to the contrary would recommend a2 tank 3/4 + hp compressor.Hatachi and senco have worked well for us.
Question:	Does the Paslode F325R include a carrying case
Answer:	Yes it does shoot both
Question:	Need nailer by 10/17 can it be shipped faster
Answer:	Yes
Question:	What size nails does the paslode 325 use
Answer:	Well I have one of those machines haven't really used been able to use it for what I intended yet depending on where the O-ring is you should be able to go someplace like Harbor Freight or Ace Hardware and get an o-ring kit and put it in better yet you should be able to go to a Milwaukee dealer that repairs Milwaukee tools and I'll probably take care of it for you for free don't go to Amazon go to Milwaukee Tools

Product description

When you need precision in tight spaces, reach for the lightweight Paslode 16 Ga Angled Cordless Li-ion Finish Nailing System. A versatile nailer designed for trim applications, this cordless nailer gives you great maneuverability to place the nail exactly where you want it, wherever you're working: overhead, on ladders, or on your knees. The Finish Nailer fits in tight spaces so nailing crown molding or baseboard in the corners becomes a breeze. Our cordless nailer, finish nails, and fuel cell is designed to work together so you can experience non-stop accuracy

• Precise Nail Placement - Angled magazine reaches tight spots and allows precise nail placement, crown molding or baseboard in the corners.
• No Downtime - 7V Li-ion battery and up to 12,000 nails per charge lessens downtime and provide fuel that will last a full day.
• Lightweight - Only 4.5 lbs. for added comfort and control.
• Convenient Maneuvering - Cordless design and no hoses make work easier.
• No Mar Tip - Preserves smooth surface and prevents scratching and markings on work surfaces.

User questions & answers

Question:	What model is it
Answer:	This is Paslode model 902400.
Question:	How many batteries does it come with
Answer:	It comes with one battery. But that one battery will last for a few days of constant use.
Question:	Does the Paslode 902400 Cordless 16 gauge Angled Lithium Ion Finish Nailer come with a protective carrying case
Answer:	The case is an exceptionally made case but does not come close to the quality of this tool. Both make it an great value.
Question:	does it come with a battery charger
Answer:	Yes, these include the battery and charger. Your choice of nails and yellow trim fuel will need to be purchased separately. This is a great tool!

Product description

When you need precision in tight spaces, reach for the Paslode 18 Ga. Cordless Li-ion Brad Nailing system. At 4.25 lbs., this is the lightest Cordless Brad Nailer on the market. Designed for fine trim applications, it leaves only a small hole in detailed trim work. This cordless nailer gives you great maneuverability to place the nail exactly where you want it wherever you're working: overhead, on ladders, or on your knees. Our cordless nailer, brad nails, and fuel cell are designed to work together so you can fasten with precision, finish without fatigue

• Easy Access - Provides superior access by reaching directly into tighter spaces.
• Consistent - Drives each nail flush into all trim for high-quality craftsmanship.
• Lightweight - The lightest Cordless Brad Nailer on the market for reduced fatigue and increased productivity.
• No Downtime - Paslode provides non-stop nailing with fuel that will last a full day.
• Durable - 7.4-Volt Li-ion battery drives up to 12,000 nails per charge; 1-1/2-hour full charge; 2-minute quick charge for up to 200 extra shots.

User questions & answers

Question:	Does it come with 2 batteries
Answer:	Yes it is, it just unscrews. If your going to bore into something that needs the power this drill has that handle might keep you fromgetting injured, boy this thing really has power. If you put it in a bind something is going to give. Great drill used one for 25 years.
Question:	Does this use staples too
Answer:	I bought one a couple months ago and it was made in Japan. It is a really nice drill lots of power, smooth, and quiet. I think you will be very happy with it.
Question:	Can this shoot a 3" pin nail
Answer:	No its a rocker trigger forward & reverse with no trigger lock
Question:	Does it take the same battery as the 16 gauge
Answer:	I don't know the torque in numbers. You have to really have a strong grip on the extended handle and good stance with your feet. If the drill bit hits some tough going it will pull loose from your hand if you don't. If you don't have a good stance with your feet it will twist your body so much you will lose your balance. Very powerful drill.

Product description

The Paslode 16-Gauge. Pneumatic Finish Nailer has a best in class design that allows for comfort in all applications. This is a reliable and durable tool you can trust to keep up with you. The oil-free design allows for long term, maintenance-free operation which reduces cleanup time and associated costs. Experience non-stop nailing with Paslode trim nails.

• Powerful Precision - Nails with powerful precision for hardwoods, crown molding, and other finish applications.
• Convenient Design - Flared out trigger allows for 2 finger placement to assist the index reach and handle can be fully gripped for improved comfort and balance.
• Low Maintenance - Oil-free design allows for a long term maintenance-free operation which reduces cleanup time and associated costs.
• Best In Class Ergonomics - Designed with enhanced features to optimize balance, maximize comfort, reduce fatigue and increase productivity.
• Consistent Nailing - Each time the trigger is pulled, the nail drives flush into the trim.

User questions & answers

Question:	Can this bump fire
Answer:	Yes
Question:	Do they sell just the drive pin replacement
Answer:	I'm sure they do. Look it up with the model number added.
Question:	I don't see what length of nails this gun can use. Anyone know
Answer:	The nail range for this pneumatic finish nailer is 1" - 2-1/2".
Question:	USA made
Answer:	This tool is made in Taiwan.

Product description

The NV83A5 Round Head Coil Framing Nailer is used for construction work such as wall sheathing, roof decking, subflooring, mobile and modular home construction, making of wooden boxes, pallets and drums, packing operations in manufacturing plants, and for other types of general packing and crating work. The NV83A5 is like the original NV83A that you have come to trust, but now with an improved trigger design and sharing all the same internal parts as the original NV83A. The NV83A5 relies on the same cylinder valve drive system as the NV83A, which offers both rapid response and great driving power.

• LIGHTWEIGHT: Only 8.8 lbs (or 9.1 lbs if the rafter hook is installed) lightweight and well balanced for easy maneuverability
• POWER AND SPEED: Cylinder valve drive mechanism provides quick response and rapid, powerful driving
• AWARD: Rated the Pro Preferred Nailer for 7 years running (2014 - 2020) by Builder and Developer Magazine
• APPLICATIONS: For wall sheathing, roof decking, subflooring, packing and crating work, and more
• SELECTIVE ACTUATION: Selectable trigger mode; choose contact or single sequential actuation mode via switch in the trigger
• FASTENERS: Accepts 16° wire coil nails from 2-IN - 3-1/4-IN
• HARDENED CLAW TIP: Resists wear on the nose and minimizes slippage when driving at an angle or toe-nailing

User questions & answers

Question:	Where is this made (country
Answer:	My local Home Depot did not carry Paslode roofing nails. I had read previous reviews stating you could use other brands of roofing nails. My nailer performed flawlessly. The coils were wound too tight to go straight into the gun, so I loosened the coil and inserted them.
Question:	Does this come with a “no mar” tip, if not can I buy one
Answer:	Where do I get the belt hook. And how in the hell can Hitachi consider themselves a premium brand and sell a ladder access tool without one? I'm livid.
Question:	can i shoot nails on concrete or cement blocks ? for furring strips
Answer:	Good morning, We offer a 60 day warranty. After your first 60 days you have a one year from date of purchase directly with Hitachi. Have a great day.
Question:	How long is the warranty
Answer:	I use it for siding facia and soffit. The nails have to be compatable with the gun. Don't have to be Hitachi brand. lots of generic brands out there

Product description

The Metabo HPT 18V Cordless Paper Strip Framing Nailer NR1890DCS completely raises the bar for cordless framing nailers.



This cordless framing nailer is designed so you no longer need the dirty hoses, loud compressors or expensive gas cartridges. It's equipped with Metabo HPT unique air spring drive system that delivers similar performance as a pneumatic nalier, but offers total cordless freedom. It uses sealed compressed air to drive each nail, which results in zero ramp up time, up to 2 nails driven per second, recoil that feels like a pneumatic nailer best of all, there is no refilling of the air tank required.



This cordless framing nailer is ideal for all construction framing applications but is particularly useful for punch-out work on a jobsite for quick in-and-out operation with minimal hassle and professional results.

• INCLUDED: 18V Cordless Paper Strip Framing Nailer
• CORDLESS FREEDOM: Pneumatic power with 18 volt cordless freedom
• FASTENERS: Accepts 30 degree clipped or offset round head nails from 2-In to 3.5-In length for jobsite versatility
• POWER: Drives 400 nails per charge using Metabo HPT's new compact 3.0 Ah Li-ion battery
• APPLICATIONS: Ideal for all construction framing applications but is particularly useful for punch-out work on a jobsite without the need for a tank or hose
• DEPTH ADJUSTMENT: Get a professional finish with varying materials with the tool-less depth of drive adjustment
• PNEUMATIC-LIKE FEEL: The unique air spring drive system delivers similar performance as a pneumatic nailer

User questions & answers

Question:	It works whit a plastic strip
Answer:	No. 2 completely different cameras. Yours I believe is a 20MP, the w80 is a 7MP. Also your battery is a BN1, not BG1
Question:	This item made in usa
Answer:	Not sure, is your item a Sony, first of all, and second, look at your battery that is already in your camera and see what the # is on the actual battery. That is how I knew it would fit mine. there is a number on the battery itself and that will confirm if it will fit.. thank you - if it does fit your camera, you will not regret getting this.. I love it; and the battery life is so much stronger .... and I love that you can charge the batteries in your vehicle on the car charger!!! it is simply the best thing!!!
Question:	I bought this gun i charged the battery and i put in 30 degree plasic strip nails and its not shooting. Whats going on
Answer:	I’m not sure. The bottom of my camera where battery goes says 3.6 v so check your camera. I don’t have my original battery to check.
Question:	Does it sink nails in engineered lumber
Answer:	You can plug the charger into a wall outlet or into the power outlet in a car. However make sure that for the sony batteries you turn them over when you plug it into the charger . This means the rounded sides are down and the rear of the battery is up. Otherwise the batteries will not charge. Other than that Ihave used the batteries since January and they work well.

Product description

The Metabo HPT NR1890DRS 18V cordless framing nailer Hitachi power tools is now Metabo HPT. Same tools. New name. The Metabo HPT NR1890DRS 18V cordless plastic strip framing nailer completely raises the bar for cordless framing nailers. Get the power and performance of Metabo HPT (formerly Hitachi power tools) pneumatic nailers with the freedom of cordless technology. This cordless framing nailer is ideal for all construction framing applications along with punch-out work on a jobsite. Get quick in-and-out operation with minimal hassle and professional results. Designed so you no longer need to worry about dirty hoses, loud compressors or expensive Gas cartridges. High stable driving power allows the nailer to drive 3-1/2” nails into even the toughest of engineered lumber with ease Equipped with Metabo HPT unique air spring drive system that delivers similar performance as a pneumatic nailer, but offers total cordless freedom. Sealed compressed air drives each nail instant drive performance means there is zero ramp up time to drive nails drive up to 2 nails per second and up to 400 nails per charge using the compact 3.0Ah battery. Recoil feels like a pneumatic nailer. Best of all, no air tank required. Covered by Metabo HPT lifetime Lithium Ion tool & 2-year Lithium Ion battery & 1 Year charger. Dry fire Lock out system prevents nailer from driving when fasteners are low for added safety. Ergonomically formed soft grip handle provides comfort and ensures a secure hold. Side lock trigger switch located on handle, locks the trigger to prevent accidental firing when nailer is not in use. Pivoting rafter hook for easy storage when cordless nailer is not needed. 10. 8 lbs. And well balanced for easy maneuverability.

• Same tools. New name. Hitachi power tools have renamed to Metabo HPT
• Cordless Framing Nailer
• Included: NR1890DRS, Compact 3. 0Ah Lithium Ion Battery, Fast Charger, Contractor Bag, Safety Glasses
• Drives plastic strip nails from 2" to 3 1/2" at 2 nails per second and up to 400 nails per charge
• Zero Ramp up time: air spring system increased driving speed and provides recoil like a pneumatic nailer
• Unique air spring drive system: compressed air drives each nail
• Selective actuation: transitions between sequential mode and bump Fire mode

User questions & answers

Question:	This nail gun is for 21 degrease. ? Or for the convencional framing nails
Answer:	21° and 30° are both conventional framing nails. But this is a 21° nailer.
Question:	Just to make sure, the cordless nail only does bring a battery, fast charger, bag, and safety glasses
Answer:	Yes, and an M5 Allen Wrench. The Fast Charger is the UC18YFSL and it will charge the 3.0 Ah battery in 45 min. There is a Rapid Charger (UC18YSL3) that charges the same battery in 30 min.
Question:	Garantia pistola
Answer:	We offer a 60 day warranty. Hitachi offers a one year from date of purchase. All warranty issues after the first 60 days must go directly through Hitachi. Have a great day.
Question:	Will this gun dry fire? I just bought it and charged the battery but it doesnt fire. Does it have to have nails in it to fire
Answer:	No it will not, nor should you try to dry-fire a nail gun. It's generally very bad on the tool. It requires about three or four nails in it to fire, depending on the size of the nail. Which means that once you us it, the gun is NOT EMPTY just because it won't fire the last nail or two; there is every chance that if you drop it or kick it out of the way it will manage to fire one of the remaining nails. Always treat this nail gun and any other nail gun like it's ready to fire.

Product features

Unique Air Spring Drive System

Uses compressed air to drive each nail resulting in zero ramp up time, increased driving speed, recoil that feels like a pneumatic nailer and quicker response time between drives

Tool-less Depth of Drive Adjustment

For a professional finish with varying materials

Selective Actuation on the Control Panel

Transitions between sequential mode and bump fire mode, when rapid nailing is preferred. Battery charge indicator located on tool control panel to easily check the available power in battery pack for less downtime

Pivoting Rafter Hook

For easy storage when nailer is not needed

Product description

PASLODE smooth Brite 30 degree framing nail is paper tape collated and specially engineered to be the latest innovation in interior nailing delivering top performance results. Designed for use with PASLODE pneumatic and cordless framers. Product measures 3-1/4" x .131 and is available in a 2500 count.

• Powerful Performance - Reinforced round head design for better drive performance in the hardest materials
• Productivity - 10% more nails per strip means less reloading and downtime
• Strength - Bonds strongly with wood fibers to increase holding power
• Cleanliness - Paper tape collation means no job site debris to clean up
• Expert Approval - Building code compliant, approved per ICC ES-3072

User questions & answers

Question:	Do these have a round or flat head? The title says round but the product information in the description says “clipped
Answer:	2500 per box
Question:	How many nails in a box
Answer:	yes pretty much the whole lenght of the nail

Product description

Paslode Fuel+Nail Combo Packs include 1,000 nails and one framing fuel cell that are matched to work like a fuel gaug+K38:P41 - when you drive all the nails, it's time for more fuel. Perfect size helps keep exterior remodeling jobs on budget.

From the Manufacturer

Have you ever run out of fuel? Paslode's new Fuel plus Nail Combo Packs for the new CF325 Cordless Framing Nailer have the right amount of fuel packed in with the right amount of nails. This new QuickLode fuel cell offers a patented no-step design with no snapping, no twisting, no aligning. Just Drop it in and go. The combo pack also comes with Paslode's 30 degree full head RounDrive GalvGuard Hot Dipped Galvanized Strip fasteners featuring Premium Corrosion and Streak Protection for use in all pressure treated lumber applications, including ACQ.

• Convenient - Fuel and Nails come in one convenient package
• Precision - Smooth Brite Nails are correctly sized for remodeling and small production jobs
• Powerful Performance - Fuel cell drives all 1,000 nails in combo pack
• Durability - All-Season Formula fuel works in temperatures down to 18 F
• Low Maintenance - Polymer coating reduces staining and streaking by 80% compared to traditional Hot Dipped Galvanized nails

User questions & answers

Question:	What is the degree of Angle
Answer:	I have not yet used a sprayer with my compresser but I probably will in the future. I think you should be fine as long as you are spraying small areas. I bought a die grinder and a 1/2 impact wrench that I use with this compressor and they both work... to an extent. I can get all 5 lug nuts off of a tire before the air runs out and the tank needs to recharge. For my needs, this is not a big inconvenience. You may have a similar experience with an HVLP sprayer. Painting a bench, no problem. Painting a house, you should probably look elsewhere. Hope this helps.
Question:	will it work in my senco framepro
Answer:	This vacuum sealer is perfect for vacuum sealing fresh garden herbs.

Product description

When you need precision in tight spaces, reach for the lightweight Paslode 16 Ga Straight Cordless Finish Nailing System. It is designed to fit in tight spaces to place the nail exactly where you want wherever you're working: overhead, on ladders, or on your knees. Our cordless nailer, finish nails, and fuel cell are designed to work together so you get the powerful precision you need to finish the job right the first time.

• Powerful Precision - Nails with powerful precision for crown molding and other surfaces.
• No Downtime - Paslode provides non-stop nailing with fuel that will last a full day.
• Lightweight Tool - Only 4.6 lbs. for added comfort and control.
• No Mar Tip - Preserves smooth surface and prevents scratching and markings on work surfaces.
• Reliable Power - 7.4V Li-ion battery drives up to 12,000 nails per charge, including 16 ga 1-1/4-in to 2-1/2-in length straight finish nails into hardwood.

User questions & answers

Question:	Is there any warranty
Answer:	I don't remember if it had a case or not. It just sits on a shelf until I use it. Every other Makita I have bought has had a case. But this one I don't seem to have a case. As far as the drill goes, it is one of the best ones I have had in the past 45 years. Plenty of power and the chuck works good and is true. I would buy no other if I needed another. I have used many drills that the chuck holds the bits a fraction off to one side. They are a pain to use. This Makita is the best.
Question:	does it include battery, charger, and case
Answer:	Mine didn’t come with a case but the description didn’t say that it did. I wasn’t needing a case.
Question:	To be clear what all comes with the gun
Answer:	per tag on drill it is 7 amp. It will still hurt your wrist.
Question:	Can this be used for boxcarsiding
Answer:	2 prong

Product description

The NR90ADS1 Framing Nailer drives paper collated nails from 2" up to 3-1/2" In length and features Metabo HPT next generation "industrial design. " The redesigned head guard allows for faster and easier disassembly process, saving valuable time during tool maintenance. Weighing only 7 lbs, it is easy to use all day, while still providing the power of a bulkier, heavier nailer. It can be used for floor and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction.

• Same tools. New name. Hitachi power tools has renamed to Metabo HPT
• APPLICATIONS: Great for flooring and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction
• LIGHTWEIGHT: At only 7. 5 lbs and well-balanced allowing for ease of maneuverability and less user fatigue
• SELECTIVE ACTUATION: Allows for quick changes between sequential and contact nailing with the flip of a switch
• TOOL-LESS DEPTH ADJUSTMENT: Depth adjustment to countersink or flush drive into a variety of materials
• FASTENERS: Accepts 2-in up to 3-1/2-in plastic collated framing nails
• NEW HEAD GUARD DESIGN: Allows for quicker disassembly during tool maintenance

User questions & answers

Question:	Does this use the Paslode paper collates nails
Answer:	Yes
Question:	can someone link nails they purchased for use with this gun? Looking for 3" to frame basement
Answer:	Hi. I've used Paslode nails, with the framer. Check the nail gun to see if it requires "paper collated", or "plastic-collated" nails, Otherwise they should be ok. Disclaimer: I've only used nails up to 2.5" long.
Question:	The picture shown is for model nr 90ae{s1} look at the model number on the nail magazine
Answer:	Yes that will tell you size angel and degree you need
Question:	does this have an adjustable exhaust system
Answer:	The exhaust port pivots so you can keep it from your face. Even if you catch the exhaust, the paper collating strip doesn’t pepper you like the plastic type.