14 best bostitch framing nails

Product description

BOSTITCH Stanley S10D-FH 3" Smooth shank 28 wire Collated stick Framing nails

From the Manufacturer

Bostitch® manufactures over 2000 types of fasteners. Each fastener is engineered for optimal performance in Bostitch® tools, and for exceeding the performance expectations of our customers. Our goal is to continually increase efficiency, productivity and quality, and to ensure building code compliance through the ICC ESR 2020, ICC ESR 1539 and ICC ER 5426 reports. Our team of engineers leads the industry in innovation and design. Utilizing our advanced laboratory, our team of engineers conducts environmental testing to study the effects of storm forces and other weather conditions, withdrawal testing to evaluate new coatings, penetration testing to evaluate drive characteristics, and development testing to optimize withdrawal, shear and pull-through performance. Bostitch® stick nails are designed, engineered and manufactured in four different forms and are generally identified by what holds the nails together – plastic, wire, paper or adhesive. Adhesive collation is used on finish nails and brads for trim and fine woodwork. Finish nails and brads range in length from 3/8” to 2-1/2” with diameters ranging from 15 to 23 gauge. The plastic, wire and paper collated nails are used for general framing and crating applications. Stick nails range in length from 1-1/2” to 6-1/4” with diameters ranging from 0.113 to 0.165 inches.

• Full Roundhead 3" X . 120" 28 Degree wire Collated framing nail
• Coated finish eases penetration resistance and increases holding power.
• Smooth shank geometry delivers acceptable withdrawal capacity when extra holding power is not required.
• 2, 000 per box
• Works in: F28WW, N88WWB, N79WW, N80SB

User questions & answers

Question:	Will these nails work in a numax framing nailer
Answer:	Yes!
Question:	Can I buy it here
Answer:	Yes, as long as the specifications listed for your nailer match the specifications noted for the nails.
Question:	will these nails work in a old N19 model nailer
Answer:	I think .120 is closer to 11 gauge?
Question:	Are they 10 gauge
Answer:	Tap-con is the supply houses name for these screws. For example....They are used by tradesmen in mounting electrical/plumbing/and misc. in masonry, cement concrete, stone, brick, and etc. You need a hammer drill to make a proper size hole at the right depth and a drill/driver to install screw. Professionals used a tapcon drill/socket in a Bosch bulldog hammer drill. They bore a hole and then use the socket feature to drive in a screw. It is a very fast way.... that cuts labor time from minutes to seconds.You can put in screwed tapcons... to mount a conduit run for an electrical system in minutes....using fancy tools and these screws

Product description

BOSTITCH S12D-FH 28 Degree 3-1/4-Inch by .120-Inch Wire Weld Framing Nails (2,000 per Box)

From the Manufacturer

Bostitch® manufactures over 2000 types of fasteners. Each fastener is engineered for optimal performance in Bostitch® tools, and for exceeding the performance expectations of our customers. Our goal is to continually increase efficiency, productivity and quality, and to ensure building code compliance through the ICC ESR 2020, ICC ESR 1539 and ICC ER 5426 reports. Our team of engineers leads the industry in innovation and design. Utilizing our advanced laboratory, our team of engineers conducts environmental testing to study the effects of storm forces and other weather conditions, withdrawal testing to evaluate new coatings, penetration testing to evaluate drive characteristics, and development testing to optimize withdrawal, shear and pull-through performance. Bostitch® stick nails are designed, engineered and manufactured in four different forms and are generally identified by what holds the nails together – plastic, wire, paper or adhesive. Adhesive collation is used on finish nails and brads for trim and fine woodwork. Finish nails and brads range in length from 3/8” to 2-1/2” with diameters ranging from 15 to 23 gauge. The plastic, wire and paper collated nails are used for general framing and crating applications. Stick nails range in length from 1-1/2” to 6-1/4” with diameters ranging from 0.113 to 0.165 inches.

• Full Roundhead 3-1/4" x .120" 28 Degree Wire Collated Framing Nail
• Coated finish eases penetration resistance and increases holding power.
• Smooth shank geometry delivers acceptable withdrawal capacity when extra holding power is not required.
• 2,000 per Box
• Works in: F28WW, N88WWB, N79WW, N80SB

User questions & answers

Question:	Will these fit a 28 degree N88WW bostitch framing nailer? Building a shed so i don't need galvanized
Answer:	Yes, as long as our specifications listed here for our nails match the requirements listed for your nailer.
Question:	I'm looking for 10 gauge nails 28 degrees Will these work for my gun
Answer:	The nails are are coated finish that will fit the following BOSTITCH tools: N79WW, N80SB, N86S, N88WWB, N100S, F28WW.
Question:	Are these nails compatible with the older 28 degree clip head nails? on my box of clip head nails, #s16d131, n80sb
Answer:	any chance you have a few craftsman nails to compare? Find someone who uses Bostich and make sure they look the same before trying a stick. try the Bostich.com site for interchanging. Dr. J.
Question:	I have a older 80's craftsman framing air nailer that i can't get nails from sears anymore. is there a chart or list online or with bostitch
Answer:	Yes, as long as the specifications listed here for our nails match the requirements listed for your nailer.

Product description

BOSTITCH S8D-FH 28 Degree 2-3/8-inch by . 120-Inch wire weld framing nails (2, 000 per box)

From the Manufacturer

Bostitch® manufactures over 2000 types of fasteners. Each fastener is engineered for optimal performance in Bostitch® tools, and for exceeding the performance expectations of our customers. Our goal is to continually increase efficiency, productivity and quality, and to ensure building code compliance through the ICC ESR 2020, ICC ESR 1539 and ICC ER 5426 reports. Our team of engineers leads the industry in innovation and design. Utilizing our advanced laboratory, our team of engineers conducts environmental testing to study the effects of storm forces and other weather conditions, withdrawal testing to evaluate new coatings, penetration testing to evaluate drive characteristics, and development testing to optimize withdrawal, shear and pull-through performance. Bostitch® stick nails are designed, engineered and manufactured in four different forms and are generally identified by what holds the nails together – plastic, wire, paper or adhesive. Adhesive collation is used on finish nails and brads for trim and fine woodwork. Finish nails and brads range in length from 3/8” to 2-1/2” with diameters ranging from 15 to 23 gauge. The plastic, wire and paper collated nails are used for general framing and crating applications. Stick nails range in length from 1-1/2” to 6-1/4” with diameters ranging from 0.113 to 0.165 inches.

• Full Roundhead 2-3/8" X . 120" 28 Degree wire Collated framing nail
• Coated finish eases penetration resistance and increases holding power.
• Smooth shank geometry delivers acceptable withdrawal capacity when extra holding power is not required.
• 2, 000 per box
• Works in: F28WW, N88WWB, N79WW, N80SB

User questions & answers

Question:	are these galvanized
Answer:	Yes, the BOSTITICH SBD-FH 28 DEGREE 2-3/8" will work for this application.
Question:	Are these nails good for fastening osb to 2x
Answer:	Check the owners manual or check on line they worked fine in My Bostich 20Volt cordless framing nailer I am not near it right now see the model number
Question:	how do i best find if these will work with a Bostitch N80 framing nailer
Answer:	Yep they are the same.
Question:	As far as I could tell clipped nails is same as half round nails, is this correct? 28 deg seems to be standard for clipped nails for older nail guns
Answer:	Yes they will. The 28 degree in the description refers to the angle of the nail. So 28 degree nails will fit any 28 degree nailer.

Product description

The BOSTITCH BTF83WW 28 Degree Wire Weld Framing Nailer provides the user with power and efficiency. The low profile design allows the nailer to be used in small areas. The versatile trigger drive selector enables the user to select from single or multi-drive modes. The fastener’s depth is controlled by the tool-free depth drive adjustment. 840 In-Lbs of pressure is concentrated to powerfully send the fastener into the material. Power and versatility make this nailer an essential tool for the jobsite. Replacement to the BOSTITCH LPF21PL Nailer. 7 Year Limited Liability Warranty

• Low profile design with enhanced ergonomics and balance for comfort and control.
• Powerful enough to drive into engineered lumber.
• Industrial grade design for high volume framing and sheathing applications.
• Tool free features: depth of drive adjustment, selectable trigger for single drive or multi drive actuation modes, adjustable rafter hook.

User questions & answers

Question:	I have nails for a bostitch nail gun but don't have the gun. which gun will shoot s16d131gal nails the box says for use in n 16,n80s,n100s andn100s
Answer:	Must be the same degree, 28 gun & nails
Question:	Is this made in usa
Answer:	The BTF83WW is manufactured in Taiwan.
Question:	The technical details list the tool weight as 3 lbs is this correct for bostitch btf83ww wire weld framing nailer
Answer:	Tool Weight: 7.9 lbs
Question:	Is this 3 1/4" or 3 1/2" max length
Answer:	3” to 3 1/4 max length

Product description

The product is RND Head Framing Nailer. Easy to use. The product is manufactured in China. Magazine Loading - Bottom Load

The Bostitch F21PL Round-Head Framing Nailer is the ideal tool for framing, sheathing, subflooring, and bracing jobs. Perfect for professionals and weekend warriors alike, this nailer features a strong, lightweight magnesium body, quick-change nosepieces for plastic-collated and metal-connector nails, a 16-inch layout indicator, and more.

Designed to Match the Task at Hand

The recommended tool for use with HurriQuake disaster-resistant nails, the F21Pl has a patented feature that lets you set nail depth with the simple push of a button. For further convenience, quick-change nosepieces let you switch from plastic-collated framing nails to metal connector nails in seconds.

The high-capacity magazine holds up to 60 plastic collated 21-degree framing nails (2.0-3.5 inch) or 60 metal connector nails (1.5-2.5 inch). Its 16-inch layout indicator, located on the magazine, lets you know at a glance the correct distance between studs.

And with an adjustable rafter hook, you can conveniently hang the nailer on joists and rafters during work breaks.

Best-in-Class Power-to-Weight Ratio

The magnesium construction of the F21PL Round-Head Framing Nailer means this tool is light enough to use all day, while still being strong enough to reliably use again and again. It also means that this tool has the best power-to-weight ratio in its class: 1,050 in./lbs. to 8.1 pounds.

The Bostitch F21PL Round Head Framing Nailer works with a standard air compressor and is backed by a seven-year limited warranty.

About Bostitch

Stanley-Bostitch manufactures top-quality, innovative fastening tools and fasteners for industrial, construction, and home-improvement applications. Products include pneumatic staplers and nailers; compressors; manual staplers and tackers; coil-fed screw systems; rivet tools; glue guns; a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes; and carton-closing staplers--many of them industry firsts.

What's in the Box

Framing nailer and two quick-change nosepieces.

From the Manufacturer

Magnesium plastic collated framing nailer / metal connector nailer. This new framing nailer drives 1-1/2- to 3-1/2-inch framing nails and comes with an interchangeable tip for placing nails accurately for metal connector applications. You get the benefit of two tools in one, no other competitive framer can match that. This light weight tool is also one of the most powerful framers with 1050 in./lbs. of driving power. It is able to tackle even tough engineered lumber applications. Tool also includes bolt on steel wear guards with integrated rubber skid pads, and printed magazine with scale and 16-inches-on-center layout feature. New smart trigger works as a sequential and bump fire trigger base on how you actuate the tool.

• Compressor/Air Tool Features: Fastener Collation,Fastener Depth Control, 1 1/2 inch to 3 1/2 inch framing nailer; 1,050 inch pounds of driving power; sequential and bump trigger
• 2 nailers in one: includes 2 quick change nose pieces, converts to framing or metal connector applications
• Lightweight magnesium housing; integrated rubber skid pads; rubber grip
• Includes 1 framing nailer; Power Source: Pneumatic
• 14 1/4 by 20 1/2 inches; 8.1 pounds.Operating Pressure:80 120 psi
• 1 1/2 inch to 3 1/2 inch framing nailer; 1,050 inch pounds of driving power; sequential and bump trigger
• 2 nailers in one: includes two quick change nosepieces, converts to framing or metal connector applications

User questions & answers

Question:	Is it true that the hammer is only "positive placement" for nails up to 2.5" long
Answer:	Yes, pp tip for nails up to 2.5" in length. Framing tip for up to 3.5"
Question:	How is it powered? Is it pneumatic or battery operated and/or use compressed gas cylinders
Answer:	It is pneumatic. I've been using a 6 gal Campbell Hausfeld compressor with 1/4" quick disconnects at about 90 - 100 psi for metal connectors and 16d nails and have never run out of air. I bought it mainly for the metal connector ability, which it does great, but is also great for down to 6d nails. Just turn down the pressure on the smaller nails.
Question:	Is it difficult to find nails for this hammer
Answer:	Metal connector nails need to be larger around to fit properly in the holes and have the shear strength. If the nail is longer than 2-1/2 inches the gun will not fire by design. I can only find the 1-1/2 21 degree nails on Amazon and Home Depot online. They are expensive, but surprisingly, I tried some 33 degree 1-1/2 inch nails in this gun and it fires normal. I don't see any wear as a result either. I would not try this with longer 33 degree nails because they would angle out of reach of the driver. The gun out performs my old Senco SN60 by a large margin, is lighter, but about an inch taller.
Question:	What is the difference between a round head and a clipped head nailer
Answer:	The round head is the traditional type nail you would find in a box or bin of nails. The clipped head is the round head clipped off to the width of the nail shank on two sides--does not had the holding power of the round head.

Product features

BOSTITCH F21PL

This 21-degree Plastic Collated Framing Nailer is designed to drive nails into engineered lumber. It is lightweight for easy management and you can control the depth of the nail with a push button.

Features:

• Two nailers in one: includes two quick change nosepieces to convert tool to either framing or metal connector applications
• Patented push button adjustable depth guide sets nails to desired depths
• Lightweight magnesium design for durability
• Adjustable rafter hook allows users to hang tool on rafters and joists

Product description

BOSTITCH S16D131-FH 28 Degree 3-1/2-Inch by . 131-Inch Wire Weld Framing Nails (2, 000 per Box)

From the Manufacturer

Bostitch® manufactures over 2000 types of fasteners. Each fastener is engineered for optimal performance in Bostitch® tools, and for exceeding the performance expectations of our customers. Our goal is to continually increase efficiency, productivity and quality, and to ensure building code compliance through the ICC ESR 2020, ICC ESR 1539 and ICC ER 5426 reports. Our team of engineers leads the industry in innovation and design. Utilizing our advanced laboratory, our team of engineers conducts environmental testing to study the effects of storm forces and other weather conditions, withdrawal testing to evaluate new coatings, penetration testing to evaluate drive characteristics, and development testing to optimize withdrawal, shear and pull-through performance. Bostitch® stick nails are designed, engineered and manufactured in four different forms and are generally identified by what holds the nails together – plastic, wire, paper or adhesive. Adhesive collation is used on finish nails and brads for trim and fine woodwork. Finish nails and brads range in length from 3/8” to 2-1/2” with diameters ranging from 15 to 23 gauge. The plastic, wire and paper collated nails are used for general framing and crating applications. Stick nails range in length from 1-1/2” to 6-1/4” with diameters ranging from 0.113 to 0.165 inches.

• Country Of Origin: China
• Model Number: S16D131-FH
• Item Package Dimension: 11.099999988678" L x 5.799999994084" W x 4.599999995308" H
• Item Package Weight: 5.0 lb

User questions & answers

Question:	Does this nail truly fit model f28ww? these nails say they are round head and model f28ww is a clipped head nail gun? please help
Answer:	I didn't count mine... ? not sure...
Question:	Does the Buy Used box still have 2000 nailsbper box
Answer:	No, these are not galvanized.
Question:	Are they galvanized
Answer:	YES IT WILL
Question:	Will these fit n80sb model
Answer:	No they are not galvanized

Product description

Metal connector nailer, drives galvanized, hardened, 1-1/2 inch metal connector nails, nails come in .131 0R .148 shank diameters, tool weight is 4.6 lbs. compact design 12 inch OC joists, comes with carrying case.

Today’s homes are stronger than ever. More knowledgeable homeowners, natural disasters, and stricter building codes have led the industry to adopt better ways of building houses. One important result of this has been the massive rise in the use of metal connectors. These metal connectors, whether it is in the form of a hurricane tie, joist hanger, or stud plate tie are used to strengthen the weaker joint areas of a home. Their popularity has given rise to a new necessity on the jobsite, the nailer to attach all of these metal connectors.

The Bostitch STRAPSHOT Metal Connector Nailer (MCN-150) is the perfect tool for all types of metal connectors. Its exposed nail tip places the fastener point directly into connector holes for a faster, more precise application. It has a built in safety that prevents the tool from firing when not placed properly into the connector hole. The Bostitch STRAPSHOT Metal Connector Nailer (MCN-150) drives 1-1/2-inch, 35 degree Paper Tape Metal Connector Nails to secure any type of metal connector plate. These nails come specially hardened to ensure that if there is a misfire it can still drive through the metal connector plate safely.

One of the features that set the Bostitch STRAPSHOT Metal Connector Nailer (MCN-150) apart from similar nailers is its size. Its compact design fits easily into hard to reach spaces including 12 inches on center studs (MCN150 only 10-1/2 inches tall). The tool is up to 50% lighter than competitive models for reduced fatigue and added maneuverability. The in line magazine also helps maneuverability by fitting into corners easily. Its low nail lockout feature prevents jams by preventing cycling with less than 5 nails for added safety. The tool also comes with hardened steel wear guards to protect the tool and adjustable exhaust to conveniently direct air away from the user. Finally, Bostitch has included a carrying case and our exclusive 7-Year Limited Warranty.

• Exposed nail tip places fastener point directly into connector holes for a faster, more precise application
• Drives 1 1/2 inch straps hot fasteners as well as all other paper tape collated metal connector nails
• At 4.6 pounds, The tool is up to 50 percent lighter than competitive models

User questions & answers

Question:	Does it still come with the rafter/belt hook? Photo shows no hook and other questions regarding this are almost 3 years old
Answer:	I've only used the BOSTITCH PT-MC14815-1M 1 1/2-Inch x .148 Paper Tape Collated Metal Connector Nails (1,000 per Box) as found on Amazon. They are black, not silver. Haven't tried any others.
Question:	what brands of nails will fit in the MCN
Answer:	This nailer is built to do a specific task. Attach metal ties. If you need to do siding I would suggest buying a siding gun.
Question:	Can you use this nailer with Hardi Plank siding driving 1.1/2” nails
Answer:	You may need to but use the mcn-250 for the toe nails on the hangers. those are 2 1/2 inches as required by code and also wherever 2 1/2 inch ones are needed. the model 250 accepts 1 1/2 inch as well so you might only but one gun I find having both far better because you can have a second installer working there are far too many nails to install in all these tecos. get it on go go go
Question:	Can this be used for deck joist hangers and hurricane straps? Is there enough nail selection to insure I find what will meet code? Thanks
Answer:	I have those nails and they are indeed "clip" headed, which means that the head is round, but is offset from the center of the nail. It will work just fine.

Product description

BOSTITCH RH-S10D131EP Round head 3-inch by . 131-Inch by 21 Degree plastic collated framing nail (4, 000 per box)

From the Manufacturer

3" x .131 Brite, Smooth-shank Framing Nail

• Plastic Collated
• Round head nails at 21 degrees
• Works in: N88RH & N88RH-2MCN

User questions & answers

Question:	what does that mean plastic coated
Answer:	.131" (3.4mm) shank diameter.
Question:	What guage are these nails
Answer:	I would say no because they will split the 2x4 truss. I use the short nails made for metal plates .Iuse a palm nailer to drive the shorter nails
Question:	Are these long nails suitable for attaching metal connectors (hurricane clips etc.) similar to the 1.5" bostitch metal connector nails
Answer:	If you are using a 3 inch long nail it is long enough to nail a 2x4 to a 2x6 on your deck. This is the type nails I use :BOSTITCH RH-S10D131EP Round Head 3-Inch by .131-Inch by 21 Degree Plastic Collated Framing Nail
Question:	Are these nails long enough to nail a 2x4 to a 2x6 like for a deck
Answer:	Each gun I have ordered comes with a hook.

Product description

BOSTITCH S6DR113GAL-FH 28 Degree 2-Inch by .113-Inch Wire Weld Galvanized Ringshank Framing Nails (2,000 per Box)

From the Manufacturer

Bostitch® manufactures over 2000 types of fasteners. Each fastener is engineered for optimal performance in Bostitch® tools, and for exceeding the performance expectations of our customers. Our goal is to continually increase efficiency, productivity and quality, and to ensure building code compliance through the ICC ESR 2020, ICC ESR 1539 and ICC ER 5426 reports. Our team of engineers leads the industry in innovation and design. Utilizing our advanced laboratory, our team of engineers conducts environmental testing to study the effects of storm forces and other weather conditions, withdrawal testing to evaluate new coatings, penetration testing to evaluate drive characteristics, and development testing to optimize withdrawal, shear and pull-through performance. Bostitch® stick nails are designed, engineered and manufactured in four different forms and are generally identified by what holds the nails together – plastic, wire, paper or adhesive. Adhesive collation is used on finish nails and brads for trim and fine woodwork. Finish nails and brads range in length from 3/8” to 2-1/2” with diameters ranging from 15 to 23 gauge. The plastic, wire and paper collated nails are used for general framing and crating applications. Stick nails range in length from 1-1/2” to 6-1/4” with diameters ranging from 0.113 to 0.165 inches.

• Full Roundhead 2" x .113" 28 Degree Wire Collated Framing Nail
• Thickcoat galvanized finish delivers consistent, corrosion-resistant performance in pressure treated lumber and exterior applications.
• Ring shank geometry provides maximum withdrawal capacity when extra holding power is required
• 2,000 per Box
• Works in: F28WW, N88WWB, N79WW, N80SB

User questions & answers

Question:	Can i use it roofing coast side
Answer:	This product can be used with the BTF83WW.
Question:	Will they work with bostich btf83ww
Answer:	As long as you have a nailer designed for use with 28 degree wire-welded nails, you should be fine. These worked great in mine, even though the head shape is different than what it came with.
Question:	I have a 28 degree campell hausfeld , can i use .113 inch nails and .120 inch , doing a yard fence , need galv nails 2 inch long
Answer:	.113
Question:	what gauge pneumatic gun will accomodate the 2 inch x .113 pneumatic nails
Answer:	That is the material used to hold each nail together as it shoots them individual

Product description

3-1/4" x 120 Smooth Shank, Galvanized, 28 Degree, Wire, Weld Full Head Stick Nail. Thick coat galvanization provides consistent high performance. Corrosion resistant coating designed to meet or exceed the performance of ASTM A153. Specifically designed for use in all pressure treated lumber, and exterior applications. Fits Bostitch Model #F28WW, True Value #632556, and other Bostitch Models N80SB, and N88WW.

From the Manufacturer

Bostitch® manufactures over 2000 types of fasteners. Each fastener is engineered for optimal performance in Bostitch® tools, and for exceeding the performance expectations of our customers. Our goal is to continually increase efficiency, productivity and quality, and to ensure building code compliance through the ICC ESR 2020, ICC ESR 1539 and ICC ER 5426 reports. Our team of engineers leads the industry in innovation and design. Utilizing our advanced laboratory, our team of engineers conducts environmental testing to study the effects of storm forces and other weather conditions, withdrawal testing to evaluate new coatings, penetration testing to evaluate drive characteristics, and development testing to optimize withdrawal, shear and pull-through performance. Bostitch® stick nails are designed, engineered and manufactured in four different forms and are generally identified by what holds the nails together – plastic, wire, paper or adhesive. Adhesive collation is used on finish nails and brads for trim and fine woodwork. Finish nails and brads range in length from 3/8” to 2-1/2” with diameters ranging from 15 to 23 gauge. The plastic, wire and paper collated nails are used for general framing and crating applications. Stick nails range in length from 1-1/2” to 6-1/4” with diameters ranging from 0.113 to 0.165 inches.

• 3-1/4" x 120 Smooth Shank, Galvanized, 28 Degree, Wire, Weld Full Head Stick Nail
• Thick coat galvanization provides consistent high performance
• Corrosion resistant coating designed to meet or exceed the performance of ASTM A153
• Specifically designed for use in all pressure treated lumber, and exterior applications
• Fits Bostitch Model #F28WW, True Value #632556, and other Bostitch Models N80SB, and N88WW

Product description

2750-2483 Features: -Full round head nails for metal connector applications.-Diamond point style.-Smooth shank.-Fits Paslode 5250/65G PP, Hitachi NR 65 AK.-Fits Bostitch F33PT, MCN-150, and MCN-250.-90,000 PSI bend yield.-1-1/2'' x .148'' x 35.-100,000 per box.

From the Manufacturer

Bostitch 33 Degree Paper Tape Collated Metal Connector Nail

• 1 1/2" x .148
• Smooth Shank
• 1000 Nails Per Box
• For Use in the Bostitch F33PT Industrial Paper Tape Stick Framing Nailer

User questions & answers

Question:	Can i use these with treated wood
Answer:	No the nails Model Number: PT-MC14815-1M are for nailers 35°
Question:	Will these shoot in a Dewalt 30 degree nailer
Answer:	The nail quantity is 1000.
Question:	Wow, product description says 100,000 nails per box. That’s a lot of nails for
Answer:	No the head is too small, the head will pull through the material.

Product description

BOSTITCH Framing Nails, 28 Degree, Wire Weld, 2-Inch x 113-Inch, 2000-Pack (S6D-FH)

From the Manufacturer

Bostitch® manufactures over 2000 types of fasteners. Each fastener is engineered for optimal performance in Bostitch® tools, and for exceeding the performance expectations of our customers. Our goal is to continually increase efficiency, productivity and quality, and to ensure building code compliance through the ICC ESR 2020, ICC ESR 1539 and ICC ER 5426 reports. Our team of engineers leads the industry in innovation and design. Utilizing our advanced laboratory, our team of engineers conducts environmental testing to study the effects of storm forces and other weather conditions, withdrawal testing to evaluate new coatings, penetration testing to evaluate drive characteristics, and development testing to optimize withdrawal, shear and pull-through performance. Bostitch® stick nails are designed, engineered and manufactured in four different forms and are generally identified by what holds the nails together – plastic, wire, paper or adhesive. Adhesive collation is used on finish nails and brads for trim and fine woodwork. Finish nails and brads range in length from 3/8” to 2-1/2” with diameters ranging from 15 to 23 gauge. The plastic, wire and paper collated nails are used for general framing and crating applications. Stick nails range in length from 1-1/2” to 6-1/4” with diameters ranging from 0.113 to 0.165 inches.

• Country of Origin:China
• Package length:18.0"
• Package width:18.0"
• Package height:21.0"

User questions & answers

Question:	wire nail
Answer:	Mine were purchased a few years ago and were the black oxide which is NOT galvanized. As far as I know you ONLY want galvanized for treated wood.

Product description

BOSTITCH Framing Nails, Wire Weld, Galvanized, Ring Shank, 28 Degree, 2-3/8-Inch x .120-Inch, 2000-Pack (S8DRGAL-FH)

From the Manufacturer

Bostitch® manufactures over 2000 types of fasteners. Each fastener is engineered for optimal performance in Bostitch® tools, and for exceeding the performance expectations of our customers. Our goal is to continually increase efficiency, productivity and quality, and to ensure building code compliance through the ICC ESR 2020, ICC ESR 1539 and ICC ER 5426 reports. Our team of engineers leads the industry in innovation and design. Utilizing our advanced laboratory, our team of engineers conducts environmental testing to study the effects of storm forces and other weather conditions, withdrawal testing to evaluate new coatings, penetration testing to evaluate drive characteristics, and development testing to optimize withdrawal, shear and pull-through performance. Bostitch® stick nails are designed, engineered and manufactured in four different forms and are generally identified by what holds the nails together – plastic, wire, paper or adhesive. Adhesive collation is used on finish nails and brads for trim and fine woodwork. Finish nails and brads range in length from 3/8” to 2-1/2” with diameters ranging from 15 to 23 gauge. The plastic, wire and paper collated nails are used for general framing and crating applications. Stick nails range in length from 1-1/2” to 6-1/4” with diameters ranging from 0.113 to 0.165 inches.

• Full Roundhead 2-3/8" x .120" 28 Degree Wire Collated Framing Nail
• ThickcoatTM galvanized finish delivers consistent, corrosion-resistant performance in pressure treated lumber and exterior applications.
• Ring shank geometry provides maximum withdrawal capacity when extra holding power is required
• 2,000 per Box
• Works in: F28WW, N88WWB, N79WW, N80SB

User questions & answers

Question:	Are the .120 the bigger framing nails
Answer:	According to product description yes.
Question:	Hi, will these work in a bostitch u/lpf28ww-r 28? thanks
Answer:	yes i had no problems
Question:	Do you know if this will work on the bostitch n
Answer:	We do not offer wire weld nails in that size.

Product description

Collated Framing Nail, Round Head Style, Collation Angle 21 Deg, Collation Type Plastic, Shank Dia 0. 113 In, Length 2 3/8 In, Diamond Point Type, Smooth Shank, Steel, Coated Finish, For Use With G0816681, 4WL01, Package Quantity 5000

From the Manufacturer

2-3/8" x .113 Brite, Smooth-shank Framing Nails

• Plastic Collated
• Round head nails at 21 degrees
• Works in: N88RH & N88RH-2MCN