10 best porter cable 15 gauge finish nailers

Product description

The Porter-Cable DA250C 1-to-2-1/2-inch 15-gauge Angled Finish Nailer comes with a maintenance-free motor for added reliability and longer tool life.

The Porter-Cable DA250C 1-to-2-1/2-inch 15-gauge Angled Finish Nailer comes with a maintenance-free motor for added reliability and longer tool life. With the ability to drive 1-to-2-1/2-inch 15-gauge "DA" style angle finish nails, this brad nailer features an internal piston catch for consistent maximum power on every shot, a tool-free adjustable exhaust to keep contaminates away from the work, and a tool-free depth-of-drive adjustment with detents for proper setting of nail heads. Also included is a tool-free jam release mechanism for easy nail removal and a sequential style trigger with a lock off switch. Other features include a contact safety located behind driver guide for better visibility, an adjustable belt hook, an integrated rubber grip for improved comfort, and a low nail reload indicator. With a 100-nail magazine ( which can be loaded as a rear load and lock style), this nailer's single mode (sequential fire) operates at 70-to-120 PSI for added versatility. Its strong and lightweight die-cast aluminum body measures 9-3/4 x 10.4 inches and weighs 2.6 pounds.

From the Manufacturer

Featuring a long life maintenance/oil-free motor that prevents oil from staining the work surface, an internal piston catch for consistent max power on every shot, and a rear exhaust that keep contaminates away from work, the DA250C is part of the newest generation of Porter Cable finish nailers. With the ability to drive 15 gauge nails from 1" to 2 1/2" in length, a tool-free depth-of-drive adjustment with detents for proper setting of nail heads, tool-free jam release mechanism for easy nail removal, a sequential style trigger with lock off switch and a removable non-marring nose tip with on tool storage, the DA250C meets all of the requirements that the discerning end user demands. Includes: Nailer, safety glasses, one ¼” fitting, finish nails and carrying case.

• Drives 15 ga. DA style angle finish nails from 1-inch to 2-1/2-inch length; Tool-free jam release mechanism for easy nail removal
• Maintenance-free motor designed to deliver long life
• Internal piston catch for consistent max power on every shot
• Tool-free depth-of-drive adjustment with detents for proper setting of nail heads
• Drives 15 ga. DA style angle finish nails from 1-inch to 2-1/2-inch length; Tool-free jam release mechanism for easy nail removal

User questions & answers

Question:	I need a sequential trigger
Answer:	If you can get something closer to 58 to 60 that would be good. If that's the only length they have I would get it any way, Its hard to find these blinds in certain lengths. If you don't buy it someone else will. Its 30 days to return, as long as there's no damage from use.
Question:	What is required CFM
Answer:	The largest width size we carry is a 48 inch.
Question:	Will this nailer be good for hanging a pre-hung oak door with oak frame
Answer:	They are not lined. I was worried about buying these online because I thought the quality might not match some custom shades I had previously had installed in my house (which I paid A LOT more for). The quality of these shades is just as good. Be sure to measure carefully.
Question:	which nails can be used in this nailer beside porter cable nails
Answer:	As long as they are not getting directly wet. Humidity is fine. We have solar shades that can get wet if you upgrade to outdoor brackets.

Product description

The NT65MA4 15-Gauge Angled Finish Nailer is the ideal nailer for installing crown and base moldings, window and door casings, chair rails, cabinets, exterior trim and staircases. The NT65MA4 nailer has a compact body and angled magazine making for easier placement and operation in tight angles. The integrated air duster clears debris from the work site allowing for faster and cleaner job completion. The NT65MA4 accepts 15-gauge nails from 1-1/4" up to 2-1/2" in length.

• 15 Gauge Finish Nailer
• Integrated air duster can be used to clear away dust and debris from the work surface in preparation for nailing or gluing
• Same tools. New name. Hitachi power tools has renamed to Metabo HPT
• Selective actuation switch allows for either sequential or contact nailing with a simple flip of the switch- no tools or parts required
• Tool-less depth of drive dial adjusts for flush fastening into varying materials for improved control and a professional finish
• 360-degree fully adjustable exhaust portal directs air exhaust away from the user or work piece
• At only 4.2 lbs, this finish nailer minimizes user fatigue, while increasing maneuverability

User questions & answers

Question:	will bostich FN type nails work in this gun
Answer:	No, you must use DA-type nails. The good news is that 95% of nail brands are DA-type: Hitachi, Senco, Nail Pro, Fastener USA, and so on.
Question:	Is this similar to Makita nailer and does use other brands of nails
Answer:	Good morning, This tool accepts the following. It doesn't have to be Hitachi nails. Have a wonderful day. It accepts 15-gauge nails from 1-1/4" long to 2-1/2" long.
Question:	Can I purchase a nose cap for this nailer.. mine didn’t come with one
Answer:	Look carefully at your gun. The nose cap is mounted, for transport, on the bottom end of the magazine. It's black, and easy to miss. I returned my first gun, thinking that it was missing the nose cap, as well.....
Question:	Nails for this item
Answer:	Use only DA-type nails (i.e., NOT Bostitch FN-style).

Product features

Selective Actuation Switch

Allows for either sequential or contact nailing with a simple flip of the switch- no tools or parts required

Tool-less, Easy to Clear Nose

For quick nail extraction should a nail jam during use

360-degree Fully Adjustable Exhaust Portal

Directs air exhaust away from the user or work piece

Factory Installed Air Fitting

Angled upwards to keep the compressor hose conveniently out of the way of the user and work piece

Product description

PORTER-CABLE PCC792LA 20V MAX Cordless Lithium 16GA Straight Finish Nailer Kit is driven by 100% battery power, which eliminates need for a compressor, hose or costly gas cartridges. The motor design provides consistent firing power into various materials (baseboard, crown moldings, cabinet assembly) and assorted climate conditions. This 16GA Straight Finish Nailer has a fastener length capacity of 1" to 2-1/2" and a magazine capacity of 100 nails. It also features multiple tool free settings that provide increased productivity and user safety and it has multi functional dual LED lights function for workspace illumination and error indication. The unit's lightweight and optimal center of gravity provide user comfort in multiple positions. Backed by PORTER-CABLE'S 3-Year Limited Warranty. Kit includes: PCC792 Nailer, PCC680L Battery, PCC691L Charger.

• 100% battery power: Eliminates need for a compressor, hose or costly gas cartridges
• Multiple Tool Free Settings: provide increased productivity and user safety
• Motor design: provides consistent firing power into various materials and climate conditions
• Multiple tool free settings: Provides increased productivity and user safety
• Fastener length capacity of 1" to 2-1/2" and a magazine capacity of 100 nails

User questions & answers

Question:	where can you find extra batteries
Answer:	The short answer is extra batteries should be available from the place you got the tool. The longer response would be Amazon or big retailers such as Lowes and Home Depot.
Question:	I'm installing pine flooring (softer wood) will this tool get the job done
Answer:	yes you can set the impact for thickness and hardness of wood
Question:	Is it more powerful than the Arrow 200 Electric brad nailer? And does the battery charger have trickle charging
Answer:	I have had 2 different electric nailers. Also have had and still use two 18 volt 18 gauge nailers. One is a combo brad/staple nailer. I must say this 16 gauge Porter-Cable is the most powerful nailer I own. It does have a trickle charge as well. This a GREAT nailer.
Question:	Is there a roofing nail available with this gun
Answer:	No, it uses 16 gauge brads only. You would need a specific roofing nail gun.

Product description

2750-4034 Features: -Use with the Porter Cable angle nailer kit DA250A (2750-8555).-Senco type.-15 gauge.-1-1/2''.-1,000 per package. Color/Finish: -Angle finish nails.

From the Manufacturer

2750-4034 Features: -Use with the Porter Cable angle nailer kit DA250A (2750-8555).-Senco type.-15 gauge.-1-1/2''.-1,000 per package. Color/Finish: -Angle finish nails.

• Fastener Gauge: 15
• Pack Quantity: 1,000
• Fasteners Per Stick: 50
• Master Pack Quantity: 10
• Fastener Coating: Brite Basic; Fastener Point Type: Chisel

Product description

The 15-Gauge Cordless Angled Finish Nailer NT1865DMAS allows the user to move easily around the jobsite without hoses or compressors!



Equipped with brushless motor technology and powered by a compact 3.0 Ah Lithium Ion battery, it is capable of driving up to 1,100 nails per charge.



It employs a unique air spring drive system (similar to Metabo HPT's pneumatic line) that uses compressed air to drive each nail resulting in zero ramp up time, increased shooting speed, recoil that feels like a pneumatic nailer, quicker response time between drives, and better flush driving -- even at an angle.



It also features a low battery indicator, selective actuation, tool-less jam release, tool-less depth of drive, variable position belt hook and LED light.



This 15-Gauge cordless angled finish nailer drives nails from 1-1/4" to 2-1/2" in length and can be used for a variety of applications including chair rail, install molding, cabinetry and other finish applications.

• CORDLESS NAILER: 15 Gauge Cordless Nailer
• INCLUDES: NT1865DMAS, Compact 3.0Ah Lithium Ion Battery, Charger, Contractor Bag, Safety Glasses
• FASTENERS: 15 gauge angled finish nails from 1-1/4-in - 2-1/2-in
• POWER: 1,100 Nails per charge using Metabo HPT's compact 3.0 Ah Li-ion battery
• APPLICATIONS: Ideal for all construction framing applications but is particularly useful for punch-out work on a jobsite without the need for a tank or hose
• DEPTH ADJUSTMENT: Get a professional finish with varying materials with the tool-less depth of drive adjustment
• PNEUMATIC-LIKE FEEL: The unique air spring drive system delivers similar performance as a pneumatic nailer

User questions & answers

Question:	why is the kit less expensive than the tool only? Is it tool in the kit the same as the standalone tool
Answer:	Comes with the pole mount, the power supply for the light, the light itself and the quick start guide.
Question:	Thanks, bu I realized the nails were different. I was wondering if there was something in the performance of the 16 gauge that made it more expensive
Answer:	yes. .5m
Question:	I need a push rod for an 18 volt finish nailer
Answer:	The diameter of the pole itself at it's biggest point is roughly ~1 inch. In my personal home setup, I too use a threaded camera clamp to hold onto the pole under the light and it works well. Hope this helps! - CorsairLobo
Question:	Why didn’t i get the rubber tip with mine? and i noticed someone else wrote a review about that. please send it to me. thanks
Answer:	This is a key light, not a set, it'd come with 1.

Product features

Unique Air Spring Drive System

Uses compressed air to drive each nail resulting in zero ramp up time, increased shooting speed, recoil that feels like a pneumatic nailer, quicker response time between drives, better flush driving- even at an angle and easy maintenance due to fewer parts to manage

Quick Clear Nose

With tool-less jam release for easy maintenance and reduced downtime

Side-lock Switch

Is incorporated to prevent accidental firing

Selective Actuation Switch

Transitions between sequential mode and bump fire mode, when rapid nailing is preferred

Product description

Maintenance-free motor Designed to deliver long life. Internal piston catch for consistent maximum power on every shot. Tool-free depth-of-drive adjustment with detents for proper setting of nail heads. Drives 16-gauge, finish Style finish Nails from 1" To 2-1/2" Length. Tool-free jam release mechanism for easy nail removal. Sequential style trigger with lock off switch. Magazine can be loaded as a rear load and lock style.

Included components Finish Nailer, 1/4" Fitting, safety glasses, and carrying case. This product is manufactured in Taiwan. This product meets customer requirement.

• Maintenance-free motor designed to deliver long life
• Internal piston catch for consistent max power on every shot
• Tool-free depth-of-drive adjustment with detents for proper setting of nail heads
• Drives 16 ga. FN style finish nails from 1-inch to 2-1/2-inch length; Tool-free jam release mechanism for easy nail removal

User questions & answers

Question:	does it have a dry-fire lockout
Answer:	It's a linen - these roman shades are superb! I LOVE mine! Well worth the money!
Question:	where can i find retainer spring for nose of portercablefn250sb
Answer:	Just a little - they are not room darkening shades
Question:	nail gun says for siding is it used for molding as well
Answer:	Are you measuring inside the window trim or from edge to edge of the window trim?
Question:	says 16 gauge will it do 18 gauge
Answer:	No.
Question:	How do i get extra batteries
Answer:	Yes, the mounting bracket is about 2.5 inches wide
Question:	Will you ship to New Zealand? If so, at what price please
Answer:	Yes they can be used for a indoor screened porch.

Product description

The PORTER-CABLE PDA15125-1 1-1/4-Inch, 15 Gauge Finish Nails are angled nails which feature a Brite Basic coating with chisel points tips. Designed for use in Porter Cable: DA250B, DA250C / DEWALT®: D51275K, D51257K, DC628K. Can also be used in HITACHI: NT65MA2, NT65AA; SENCO: FP35, FP41XP, FP42XP, SFN30. 1000 Nails per pack / 50 nails per stick.

• Fastener gauge: 15
• Pack quantity: 1,000
• Fasteners per stick: 50
• Master pack quantity: 10
• Fastener coating: brite basic; fastener point type: chisel

User questions & answers

Question:	What is the degree of the angle
Answer:	Yes, please email our customer support team.

Product description

The PORTER-CABLE PDA15250-1 2-1/2-Inch, 15 Gauge Finish Nails feature a Brite Basic coating, with chisel point tips. Designed to be used with Porter Cable DA250B, DA250C Nailers; DEWALT®: D51275K, D51276K, DC628K. Also can be used in HITACHI NT65MA2, NT65AA; SENCO FP35, FP41XP, FP42XP, SFN30, Cordless Finish 41

• Fastener Gauge: 15
• Pack quantity: 1,000
• Master pack quantity: 10
• Master Pack Quantity: 10
• Fastener Coating: Brite Basic; Fastener Point Type: Chisel

User questions & answers

Question:	Not listed but I'm guessing 34 degrees "DA
Answer:	No, the length can not be shortened.
Question:	Will these fit a porter cable model 250a? the description says that they fit models 250b and 250c. i can't find nails for my perfectly good model 250a
Answer:	Please contact our support team via Amazon messaging and we will be happy to send you a PDF file with the installation instructions.

Product description

The Makita 15 gauge angled finish nailer (model AF635) offers an array of features and powerful performance in a compact size. The AF635 has a rear-loading magazine that accepts standard DA style (34⁰), 15 ga. Angled finish nails sized 1-1/4" to 2-1/2". the nail Lock-out and large windows alert the user when to reload nails as the contact arm and trigger are used together for controlled firing. With a compact size and weighing in at only 4 lbs., the AF635 was engineered for all-day professional use. Additional convenience features include a reversible belt hook that allows the tool to remain close-by, a multi-directional exhaust port that directs exhaust air away from the user, a built-in air Duster that provides convenient air flow to clear your workspace, and a 2-mode selector switch offering quick control over nailing operation.

• Powerful motor drives 15 gauge "DA" style angled finish nails from 1-1/4" to 2-1/2"
• Magnesium body, aluminum MAGAZINE and cylinder deliver strength and durability
• "Tool-less" depth adjustment for more precise flush and Countersink nailing
• Nail lock-out mechanism protects tool and work surface from dry-fires
• Built-in air duster provides convenient air flow to clear work surface

User questions & answers

Question:	Need to replace nail set
Answer:	Not sure what that means. But don't buy that nail gun! You end up having to set one-third of the nails by hand and that's annoying
Question:	Will this shoot 16 gauge nails too
Answer:	No, it is designed for only 15ga nails
Question:	Anybody has the bare gun weight
Answer:	Specs say 4 lb but it feels much lighter and has great power. Been a loyal Senco finish nailer user for years but this is a much better nail gun especially for the price.
Question:	Are these 34* nails hard to find in say, a big box store??? I cant even find them on Amazon and thats my only concern is not finding the right nails
Answer:	I ordered Senco A302000 15 gauge 2 in. and Senco A302500 15 gauge 2 1/2 in. that work fine. These were recommended by Amazon. Some nail guns are 33 1/3 degree and some are 34 degree. Not much of a difference there.

Product features

Makita AF635 15 Gauge, 2-1/2" Angled Finish Nailer, 34⁰

The Makita 15 Gauge Angled Finish Nailer (model AF635) offers an array of features and powerful performance in a compact size. The AF635 has a rear-loading magazine that accepts standard DA style (34⁰), 15 ga. angled finish nails sized 1-1/4" to 2-1/2". The nail lock-out and large windows alert the user when to reload nails as the contact arm and trigger are used together for controlled firing. With a compact size and weighing in at only 4 lbs., the AF635 was engineered for all-day professional use. Additional convenience features include a reversible belt hook that allows the tool to remain close-by, a multi-directional exhaust port that directs exhaust air away from the user, a built-in air duster that provides convenient air flow to clear your workspace, and a 2-mode selector switch offering quick control over nailing operation.

Includes:

3 Year Warranty

Pnewumatics - 3yr. Warranty

Each Makita Tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita Tool within 30 days of purchase, return it and Makita will provide, at Makita's option, a replacement or refund.

Every Makita Pneumatic Nailer is warranted to be free of defects from workmanship and materials for the period of three years from the date of original purchase. Should any trouble develop during the three-year period, return the complete Pneumatic Nailer, freight prepaid, to one of Makita’s Factory or Authorized Service Centers. If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at our option, replace) without charge. This limited does not apply to Makita Pneumatic Nailer Accessories.

This warranty does not apply where:

Repairs have been made or attempted by others.

Repairs are required because of normal wear and tear. Normal wear parts include the following and are not covered under this warranty: piston/driver assemblies, piston stops, driver blades, rubber o-rings, seals, isolators, air filters, and driver belts.

The Pneumatic Nailer has been abused, misused, improperly maintained or operated. Improper operation includes the failure to use clean, dry regulated compressed air and/or air pressures exceeding the maximum indicated on the nailer casting.

Alterations have been made to the tool.

In no event shall makita be liable for (a) any indirect, incidental, punitive or consequential damages arising from the sale or use of the products sold hereunder, or (b) any amount in excess of the amount actually paid to makita for the products sold hereunder for any liability arising from the sale or use of the products sold hereunder. This limitation applies both during and after the terms of the warranty.

Makita disclaims liability for any implied warranties, including implied warranties of 'merchantability' and 'fitness for a specific purpose,' after the three-year term of this limited warranty.

This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.

Product description

2750-4059 Features: -Use with the Porter Cable angle nailer kit DA250A (2750-8555).-Senco type.-15 gauge.-2''.-1,000 per package. Color/Finish: -Angle finish nails.

From the Manufacturer

2750-4059 Features: -Use with the Porter Cable angle nailer kit DA250A (2750-8555).-Senco type.-15 gauge.-2''.-1,000 per package. Color/Finish: -Angle finish nails.

• Fastener gauge: 15
• Pack quantity: 1,000
• Fasteners per stick: 50
• Master pack quantity: 10
• Fastener coating: brite basic; fastener point type: chisel

User questions & answers

Question:	can i use this for wood fence
Answer:	You can adjust the height of the shade by raising and lowering the shade. This style shade is not available in custom order length sizes.