12 best straight flute taps

Product description

Straight threaded flute, suitable for hand machine where metric threads are specified.

Straight 3 flutes are ground to provide rapid chip removal for efficient threading.

• Product Name : Hand Tap;Material : SKS2;Color : Silver Tone
• Thread Type : Bottoming ,Taper;Number ofFlutes : 3;Flute Diameter : M4(4mm)
• Flute Length(Approximately) : 20mm/ 0.8";Pitch Size : 0.7mm;SquareEnd Size : 4 x 4mm / 0.16" x 0.16"(L*W)
• Shank Diameter : 5mm / 0.2";Overall Length : 56mm / 2.2"
• Weight : 23g;Package Content : 3 x Hand Tap1 x Plastic Storage Case

Product description

Metric M3 x 0.5mm High Speed Steel Right Hand Thread



Suitable for in ordinary lathe, drilling and tapping machine of screw thread processing, machine use to cuts a thread on the inside surface of a hole, creating a female surface which functions like a nut.

• Item name:Metric Tap,Plug type;Material : HSS(High Speed Steel)
• 3 Straight threaded flute;Thread Direction:Right Hand
• Flute Diameter : 3mm / 0.1";Flute Teeth Pitch : 0.5mm / 0.02"
• Total Length : 42mm / 1.66"; Shank Dia : 3mm / 0.1"
• Package include : 10 x Taper and Metric Tap

Product description

Drill America dwt series qualtech National pipe straight Taps marked NPS is suitable for tapping holes, or couplings, for low pressure work to assemble with taper threaded pipe or fittings to secure a tight joint when a sealer is used. It is suitable for npsc and NPSM work. High-speed steel tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of tool holding systems. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.

• High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
• Round shank with square end
• Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
• Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction

User questions & answers

Question:	What is the overall length of the 3/4-14 tap
Answer:	Hello This is a standard size NPS (National Pipe Straight) tap. the overall length is 3-1/4" and thread length is 1-3/8"
Question:	Looking for a 3/4 nps tap, what part number do i need
Answer:	Look at the table on this page: https://www.amazon.com/dp/B01LYFRJUF?ref_=pe_527950_33920290_dpLink According to the table, you will need part number DWT64120 for a 3/4 NPS tap.
Question:	what is the drive size on 3/8 NPS tap
Answer:	Hello the shank szie on the 3/8" NPS tap is 0.7 inches Thanks
Question:	What is the size of the square drive end of this? Is it 1/2 inch
Answer:	The shank Diameter 1-1/2" and the square size 1-1/8"

Product features

Drill America NPS Taps

Suitable for tapping holes, or couplings, for low pressure work to assemble with taper threaded pipe or fittings to secure a tight joint when a sealer is used. It is suitable for NPSC and NPSM work.

High Speed Steel NPS Tap

For use in re-threading damaged threads or making new threads in a wide range of materials such as plastic and steel.

Product description

Specifications:

Material: Bearing steel

Tap Size: M3, M 4, M5, M6

Tapping On: Aluminum, wood, plastic and other soft materiel

Features:

Wrench and taps are made of high quality steel for durability and long service life. Tap wrench is very convenient and practical and it is a necessary tool for tapping. Adjustable chuck easily and firmly clamp the tap. Mainly used for hand tapping operation.

This set contains four taps in different size for tapping various threads. It is a great tool set used to create screw threads on wood, plastic, aluminum or many other soft materials.

Instruction:

1, Insert cone part first and make sure the tap center line agrees with drilling center line.

2, Rotate tap wrench with a even force to feed tap, don't need to add force after feed.

3, Reverse rotate about 45 ° each time rotate tap to cut chip in order to avoid blocking.

4,  If it is difficult to rotate tap, stop adding force or tap will be broken.

Package includes:

1 x Tap Wrench

4 x Taps

• Adjustable chuck easily and firmly clamp the tap. Mainly used for hand tapping operation
• Tap wrench is very convenient and practical and it is a necessary tool for tapping
• It is a great tool set used to create screw threads on wood, plastic, aluminum or many other soft materials
• This set contains four taps in different size for tapping various threads
• Wrench and taps are made of high quality steel for durability and long service life

Product description

Feature:



These machine hand taps are ideal for hand machine where metric threads are specified.

fit for machining nuts or other common thread on the machine

Used for clocks and watches, and low hardness of wood and soft metal hole processing

Made of high speed steel with high wear and heat resistant,durable and with opening direction sign on the box.

Standard metric thread design, clear and tidy, no burr, provide rapid chip removal for efficient threading

Standard metric thread and smaller thread tab design, clear and tidy, no burr, provide rapid chip removal for efficient threading and smooth tapping.

With these machine hand taps, you will have a smooth tapping experience

Thread pitch of straight flute tap is as follows:M1 x 0.25,M1.2 x 0.25,M1.4 x 0.3,M1.6 x 0.35,M1.7 x 0.35,M1.8 x 0.35,M2 x 0.4,M2.5 x 0.45,M3 x 0.5,M3.5 x 0.6 Specifications:



Material: high speed steel

Size:M1,M1.2,M1.4,M1.6,M1.7,M1.8,M2,M2.5,M3,M3.5

Quantity:10 pcs

Weight:35g

There are total 10 pieces of taps in different metric sizes from M1 to M3.5(M1 M1.2 M1.4 M1.6 M1.7 M1.8 M2 M2.5 M3 M3.5),and with carved marking size on the corresponding shank. Package Included:



10 x Micro Taps for Clocks and Watches Tapping

• Micro Taps for Clocks and Watches Tapping, Mini NC High Speed Steel Metric Straight Flute Coarse Thread Design,10 pcs(M1 M1.2 M1.4 M1.6 M1.7 M1.8 M2 M2.5 M3 M3.5)
• These machine hand taps are ideal for hand machine where metric threads are specified fit for machining nuts or other common thread on the machine
• Standard metric thread and smaller thread tab design, clear and tidy, no burr, provide rapid chip removal for efficient threading and smooth tapping;With these machine hand taps, you will have a smooth tapping experience
• Thread pitch of straight flute tap is as follows:M1 x 0.25,M1.2 x 0.25,M1.4 x 0.3,M1.6 x 0.35,M1.7 x 0.35,M1.8 x 0.35,M2 x 0.4,M2.5 x 0.45,M3 x 0.5,M3.5 x 0.6
• Package Included:10 x Micro Taps for Clocks and Watches Tapping

Product description

Specifications:

Product Name: Drill Metric Tap

Material: HSS (High-Speed Steel) 

Thread Size: M6

Accuracy: H2

Shank Width: 6mm / 0.23 inch

Thread Length: 27mm / 1.06 inch

Total Length: 67mm / 2.63 inch

Weight: 11g



Features:

Straight 3 flutes are ground to provide rapid chip removal for efficient threading.

Used with some cutting fluid or keep it wet when tapping, the tap will last longer.

The mini metric taps are mainly used for clocks, watches, low hardness wood and soft metal hole processing.



Package Contents:

1 x Metric Tap

• Thread size: M6; shank diameter: 6mm; pitch: 1mm
• Thread length: 27mm; total length: 67mm; material: HSS; flute: straight
• Left-hand cut tools have a cutting action that engages when they are run in a counter-clockwise direction.
• Round shank with square end, standard metric thread design, clear and tidy, fast chip removal for efficient threading.
• Ideal for auto repair and machinery where metric threads are specified, allows you to remove broken screws or bolts. Suitable for bicycle repair, assemble furniture, machinery manufacturing.

Product description

Straight Flute hand taps are used for hand tapping and machine tapping in through holes or blind holes in a wide variety of materials.

• List No. 2068
• 3 Piece Tap Set
• High Speed Steel
• Package Weight : 0.09 kilograms

User questions & answers

Question:	If this is a tap set, why doesn't it indicate taper plug bottoming? Be clear
Answer:	This tap set is manufactured in the USA.
Question:	Are these taps manufactured in the United States
Answer:	Total size: 9.4" x 4.7" x 1" Every compartment size: 2" x 1.3" x 0.8"

Product description

Used for cutting threads on screws and watch repair.

Design for hand cutting applications.

Plug style tap is the most commonly used style of tap.

Taps is the most important tool for manufacturing operator to thread processing.



Specification:

Material: High Speed Steel

Size: 1mm 1.2mm 1.4mm 1.6mm 1.7mm 1.8mm 2mm 2.5mm 3mm 3.5mm

Thread Diameter: 1mm(M1) / 1.2mm(M1.2) / 1.6mm(M1.6) / 1.7mm(M1.7) / 1.8mm(M1.8)

Length: 30mm / 33mm / 34.5mm / 35mm / 39mm / 44mm / 51mm



Package Included:

1 set of Straight Flute Hand Taps set (Including 10 pcs different size)

• 【Size】The metric size of this tap is from M1 to M3.5 (M1 M1.2 M1.4 M1.6 M1.7 M1.8 M2 M2.5 M3 M3.5). You could see the marker on corresponding shank
• 【Material】Taps are made of high speed steel. Wear resistant, heat resistant, durable, ensure to last longer
• 【Structure】Straight flute coarse thread design. Standard thread distance, clear and tidy, no burr. It can be used for making both internal and external threads on small parts
• 【Application】Metric Tap used in Jewelry making and Watch repair made to be used with soft precious metals (For use with Gold, Silver, Copper and Brass)
• 【Maintenance】Always use a cutting fluid when using the Taps, turn a few threads and reverse slightly to remove the metals that have been cut

Product description

Features:

- Wrench and taps are made of high quality steel for durability and long service life.

- Tap wrench is very convenient and practical and it is a necessary tool for tapping.

- Adjustable chuck easily and firmly clamp the tap. Mainly used for hand tapping operation.

- This set contains four taps in different size for tapping various threads.

- It is a great tool set used to create screw threads on wood, plastic, aluminum or many other soft materials.

Specifications:

Material: Bearing steel

Tap Size: M3, M4, M5, M6

Tapping On: Aluminum, wood, plastic and other soft materiel

Instruction:

1, Insert cone part first and make sure the tap center line agrees with drilling center line.

2, Rotate tap wrench with a even force to feed tap, don't need to add force after feed.

3, Reverse rotate about 45 ° each time rotate tap to cut chip in order to avoid blocking.

4,  If it is difficult to rotate tap, stop adding force or tap will be broken.

Package includes:

1 x Tap Wrench

4 x Taps

• [Necessary Tool for Tapping]: This tap wrench handle is small in size, light and durable, which is an essential tool for tapping
• [Adjustable Chuck]: This t-handle tap ratcheting wrench adopts an adjustable chuck design, which can clamp the tap easily and firmly
• [4 Types of Taps]: This ratcheting t-handle tap wrench has four taps of different sizes, namely M3, M4, M5, M6, which can be used for these types of threads
• [Made of High-quality Steel]: This tapping ratcheting wrench is made of high-quality steel, with good durability and good strength
• [Wide Applications]: This adjustable t-handle ratchet tap holder wrench is very suitable for creating threads on wood, plastic, aluminum or many other soft materials

Product description

The third and most astounding album from the young and talented Swedish multi-instrumentalist Gustav Ejstes, aka Dungen. Originally released in 2004 in Sweden it's now seeing the light of the day in the UK where they have become NME favorites. This is the long-awaited follow up to his two previous highly acclaimed albums, and this recording showcases the ultimate in Swedish psych/prog/pop/folk rock! Ta Det Lugnt is a beautiful, uncompromising, multifaceted musical trip straight into your head and deep in the Swedish forests. It offers Dungen's most exciting and adventurous recordings and features stunning musicianship, stellar vocals, Hammond B-3 organ, flute, violin, groovy bass, swinging drums, electric and acoustic guitars and screaming fuzz. Spellbinding Swedish folk rock pop psych. Subliminal Sounds. 2005.

Product description

The Union Butterfield 1599(M) nitride high-speed steel hand threading tap has straight flutes and a round shank with a square end, and is used to create metric right-hand threads in a number of materials, with best performance in cast iron. The straight flutes are suitable for threading through holes (extending through the workpiece) and blind or bottoming holes (with only one opening). Nitride finish offers increased hardness and wear-resistance, and is good for working with abrasive materials such as cast iron.

Right-hand threads are designed to tighten when the head or nut is rotated clockwise (the most common threading direction). High-speed steel (HSS) is a common general-purpose steel for cutting tools and is compatible with a variety of materials. The round shank with square end makes this tap suitable for hand or power-driven applications. This tool can be used in machines, such as drill presses or lathes, or with hand tools such as tap wrenches.

In the Union Butterfield 1599(M) series all taps have four flutes. They are available with a variety of chamfers. This tap conforms to ANSI standards and can create threads to a depth 1 ½ times its diameter. It is suitable for the ANSI 6H tolerance class: 6H is used for a normal length of thread engagement and medium tolerance quality.

Taps produce internal threads in previously formed holes and can be used in machines (such as drill presses) or with hand tools. Common types of taps include hand taps, spiral point taps, spiral flute taps, thread forming taps, and pipe taps. Hand taps (straight-flute taps) collect chips in the straight flutes of the tool; spiral point taps push chips through holes ahead of the tool; and spiral flute taps pull chips back from the tip of the tool, up and out the hole. Thread forming taps, also known as cold forming taps, press rather than cut to create threads in a drilled hole, and no chips are created. Pipe taps create threads in pipes and pipe fittings. Each thread type designates a thread profile and each type is identified with an abbreviation. In the U.S. and Canada, the Unified Thread Standard is the dominant thread type, including UNC (Unified Coarse), UNF (Unified Fine), and NPT (National Pipe Taper) threads, among others.

Dormer Pramet manufactures cutting tools under the following brands: Precision Twist Drill, Dormer, Union Butterfield and Pramet. The company has locations around the world, and provides tools adhering to ANSI, NAS, and DIN standards.

• Hand threading tap with straight flutes cuts threads in through holes and blind holes
• Nitride finish for increased hardness and wear-resistance, suitable for abrasive materials such as cast iron
• Produces ANSI standard right-hand threads in metric sizes
• High-speed steel is compatible with a variety of materials
• Round shank with square end allows tap to be used in hand or power-driven applications

Product description

Metric M5 x 0.8mm High Speed Steel Right Hand Thread



Suitable for in ordinary lathe, drilling and tapping machine of screw thread processing, machine use to cuts a thread on the inside surface of a hole, creating a female surface which functions like a nut.

• Item name:Metric Tap,Plug type;Material : HSS(High Speed Steel)
• 3 Straight threaded flute;Thread Direction:Right Hand
• Flute Diameter : 5mm / 0.196''; Flute Teeth Pitch : 0.8mm / 0.31''
• Total Length : 56mm / 2.2'';Diameter : 4.5mm / 0.18''
• Package include: 4Pcs Taper and Plug Metric Tap