14 best shark lathes
If "Shark lathes" is a new or specialized product introduced after 2023, we won't have any information on it. we recommend checking with reputable sources, manufacturers, or industry-specific websites for the most up-to-date information on this product.
Below you can find our editor's choice of the best shark lathes on the market
Shark 060-6 Accu-Turn Style Positive Rake Bit for Disc/Drum Lathes, 6-Pack
Shark
Product description
We have been a supplier/manufacturer to the Automotive Aftermarket since 1983. Our products are designed with the professional mechanic, technician, welder, or fabricator in mind. All of our products are manufactured for professional or production use; and many are made in our own facility in Rockford, MN.
From the Manufacturer
Shark Toolholders are guaranteed to perform as good as any OEM Toolholder. Made to exacting standards, we offer an alternative to OEM without excessive cost. Use on Models: 8911, 8922, 8944, 8989, 8991 or 8993. Cutting Edges: 3
- Hardened carbide bits
- Less wear and tear than typical OEM bits
- Offers you 3 cutting edges
- Precision pressed and ground
- Durable and long lasting
User questions & answers
| Question: | Sirve para Torno Johnbean |
| Answer: | Hello, our 103-10 Bits https://www.amazon.com/dp/B00JBQ2NOK. May work best for your John Bean Lathe. 3 Cutting Edges for use on OEM# 907681-610 for Ammco. OEM# 7681-10 for FMC, John Bean, Barrett, Snap-On-the-Car Lathes. OEM# 221-640-3 Hunter. Let us know if you have more questions. Thanks! |
Shark A4347N Basic Brake Lathe Adaptor Set without Arbor Or Nut
Product description
Total adaptor set required for mounting drums and rotors on 1-Inch arbors. Our full line of Welding Supplies and Accessories include electrodes, wire, abrasives, wire wheels, accessories for cutting and welding; as well as helmets, goggles, glasses and face shields. We also offer welding blankets, screens, protective clothing and many other items which complement our welding line.
From the Manufacturer
Total adaptor set required for mounting drums and rotors on 1-Inch arbors. Our full line of Welding Supplies and Accessories include electrodes, wire, abrasives, wire wheels, accessories for cutting and welding; as well as helmets, goggles, glasses and face shields. We also offer welding blankets, screens, protective clothing and many other items which complement our welding line.
- Does NOT include arbor or nut
- Replacement part for Ammo brake lathes
- Made in the US
- Model number: A4347N
Ammco 1175 Clamp on Silencer for Brake Lathe
Ammco
Product description
Ammco clamp on brake rotor silencer is designed to reduce or eliminate chattering and deflects metal chips as rotor is being turned
- Chip Deflecting
- Designed for brake rotors
- Clamp on style for easy on / off access
- Package Dimensions : 15.24 L x 2.032 H x 12.446 W (centimeters)
WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe
Product description
Remember when you could turn your own pens? Fill your house with as many pens as you can with the WEN 8-inch by 12-inch variable speed mini wood Lathe. Adjust the variable speed anywhere from 750 to 3200 rotations per minute. The WEN 8-inch by 12-inch variable speed Benchtop wood Lathe features an MT1 spindle and Tailstock taper to tightly grip workpieces, two tool rests (4-1/2 inch and 7 inch) to provide needed support for chisels and tools during operation, and a 3.2-Amp motor to keep things turning. The easy-to-use Lever clamping system makes adjustments to both the tool rest and the Tailstock simple and precise. The WEN wood Lathe also includes a flat wrench, a headstock spur center, A Tailstock cup center, A knockout rod and a 2.3-Inch faceplate for non-spindle work pieces. And, because its a WEN product, your Lathe comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line. Remember when you could turn pens, chess pieces and more? Remember WEN.
- Perfect for pens, bowls, cups, chess pieces, and other small workpieces
- Fits workpieces up to 12 inches long and 8 inches wide
- 3.2-Amp motor provides over 50% more power than most 8-inch wood lathes
- Adjust the soft start variable speed motor anywhere from 750 to 3200 RPM
- Features a 2.3-Inch face plate, an MT1 spindle and tailstock taper, and two interchangeable tool rests
User questions & answers
| Question: | Anybody know the thread size for the three tapped mounting holes on the underside of the lathe |
| Answer: | From their website: Benchtop mounting bolts: 0.30 Inch x 20 TPI (M8 x 1.25 pitch) |
| Question: | can you use a dedicated pen drilling chuck on this on this model 3420 or will it burn up the motor. I want to drill my blanks with it to |
| Answer: | I use a drilling chuck for all my pen blanks. As suggested, drill slowly, and frequently pull out the drill to remove shavings, as the blank may overheat and split. |
| Question: | How long did it take for you to get it? Says it ships in 2 months, with Prime |
| Answer: | When bought this lathe, they sent me 2. That being said, I got it when they said I would get it. |
| Question: | I'm interested in buy this lathe, does it run with 220 v or 150v, here were I'm living we run only 220. Waiting for answer, regards |
| Answer: | 110 |
Product features
WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe
You will now easily be able to fit work pieces up to 12 inches long and 8 inches wide with the WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe. The minimal design is ideal for pens, bowls, cups, chess pieces, and other small work pieces. You will be able to take on larger projects around your home with this tool.
Straightforward, Sturdy and Easy to Operate
With a stunning build quality, the WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe provides sturdy frame for various work pieces. Made from cast iron, features a 2.3 inch face plate, an MT1 spindle and tailstock taper and two interchangeable tool rests for added versatility.
Shark 70B Clamping Silencer Band for Ammco, Fmc, Accu-Turn and Other Style Lathes
SHARK
Product description
Chatter depressing, chip deflecting clamping silencer band for Accu-turn, FMC and many other brake lathes. Used on bench or on-the car brake lathes of all types, the silencer rides behind the tool bit to meet the vibration and noise where it starts-at the tool itself. Long-life pad material will give you long life.
- Spring for applying tension
- Made in usa
- It comes in a pack of 1
User questions & answers
| Question: | How thick are the pads on this silenser |
| Answer: | 1/4 to 5/16 of an inch. |
| Question: | Will this work on hunter bl505 lathe |
| Answer: | Hello, Yes the Clip-on silencer will work on a Hunter BL505 Brake Lathe Thank you, Shark |
Shark 71B Clamping Silencer Band for Pro-Cut Style On-The-Car Lathes
Product description
Chatter depressing, chip deflecting clamping silencer band for Pro-Cut as well as Accu-turn, FMC and other brake lathes. Used on bench or on-the car brake lathes of all types, the silencer rides behind the tool bit to meet the vibration and noise where it starts-at the tool itself. Long-life pad material will give you long life.
- Tough dampening pads
- Spring for applying tension
- Made in USA
- 1-Pack
Shark 980 Spring Silencer Band for Use On Vented Rotors to Silence Noise
SHARK
Product description
Rubber filled spring silencer band is used to deaden the noise and vibration associated with cutting rotors.
- 9-Inch diameter
- Metal steel spring construction
- Made in USA
- Quality product Dampens machining vibrations
User questions & answers
| Question: | It says 4 pack does it mean four springs? Or four complete set of these springs |
| Answer: | Jit mean 4 is one set it take four spring to go around the rotor |
Shark Industries FMC/John Bean/Barrett/Snap-on Style Positive Rake Bit - 10 Pk
Shark Industries
Product description
We have been a supplier/manufacturer to the Automotive Aftermarket since 1983. Our products are designed with the professional mechanic, technician, welder, or fabricator in mind. All of our products are manufactured for professional or production use; and many are made in our own facility in Rockford, MN.
- High quality zirconia
- Aggressive and excellent for sanding
- Easy to use
- Quality material
- Durable and long lasting
User questions & answers
| Question: | Will these fit ranger lathes |
| Answer: | If it is a brake lathe yes it would. If not I am unsure. |
Shark 428 Positive Rake Right Hand and Left Hand Round Tool Holder Set
Shark
Product description
We have been a supplier/manufacturer to the Automotive Aftermarket since 1983. Our products are designed with the professional mechanic, technician, welder, or fabricator in mind. All of our products are manufactured for professional or production use; and many are made in our own facility in Rockford, MN.
From the Manufacturer
Shark Toolholders are guaranteed to perform as good as any OEM Toolholder. Made to exacting standards, we offer an alternative to OEM without excessive cost. Use on Rels 2000. Ammco Model 3000, 4000, 4100 and 7000. Accu 8911, 8922, 8944, 8989, 8991, 8993, and many other lathes. Uses 066 Bits. OEM #: Shark 428, Ammco 40630, RELS 48010, Hunter.
- Positive rake tool holder tool
- Right and left handed
- Easy to use
- Quality material
- Durable and long lasting
Shark Industries Pro-Cut Positive Rake Bit. With Grooves - 10 Pk
Shark Industries
Product description
We have been a supplier/manufacturer to the Automotive Aftermarket since 1983. Our products are designed with the professional mechanic, technician, welder, or fabricator in mind. All of our products are manufactured for professional or production use; and many are made in our own facility in Rockford, MN.
- Hardened carbide bits
- Less wear and tear than typical OEM bits
- Offers you 3 cutting edges
- Precision pressed and ground
- Durable and long lasting
User questions & answers
| Question: | are these interchangeable for |
| Answer: | sure |
| Question: | does this come with the screws also |
| Answer: | yes |
| Question: | Do the Shark 069-10 cut rotors well? Our techs say we purchased the Shark bits in the past and they wouldn't cut rotors |
| Answer: | They cut brake rotors fine for us on our pro cut brake lathe. |
Shark 193 Negative Rake Right Hand and Left Hand Tool Holder Set
Product description
We have been a supplier/manufacturer to the Automotive Aftermarket since 1983. Our products are designed with the professional mechanic, technician, welder, or fabricator in mind. All of our products are manufactured for professional or production use; and many are made in our own facility in Rockford, MN.
From the Manufacturer
Shark Toolholders are guaranteed to perform as good as any OEM Toolholder. Made to exacting standards, we offer an alternative to OEM without excessive cost. One 191 and 1 192. For use on One 191 and 1 192. Uses Performance 062 Bits. OEM #: All Tool 8586, Performance 8586, Hunter RP8 8586, Ammco 6999, RELS 45701.
- Used for disc and combination brake lathes when cutting rotors
- Works with Ammco models 3000,4000,4100 and 7000 lathes
- Also works on RELS 2001
- Easy to use
- Durable and long lasting
Shark 408-6 Extra Life – Superior Grade .048 Radius Positive Rake Carbide Bits for Bench & On-The-Car- Brake Lathes. Accu-Turn, Ammco, FMC, John Bean, Barrett, Snap-On, Ranger, RELS
SHARK
Product description
We have been a supplier/manufacturer to the Automotive Aftermarket since 1983. Our products are designed with the professional mechanic, technician, welder, or fabricator in mind. All of our products are manufactured for professional or production use; and many are made in our own facility in Rockford, MN.
- Package Dimensions :16.51 Cm L X4.318 Cm W X1.777 Cm H
- Product Type :Vehicle Light Assembly
- Country Of Origin :United States
- Package Weight :2.0Lbs
- Aggressive And Excellent For Sanding
Shark 192 Negative Rake Left Hand Tool Holder
Product description
Shark Toolholders are guaranteed to perform as good as any OEM Toolholder. Made to exacting standards, we offer an alternative to OEM without excessive cost. Use on disc cutting brake lathes and combination lathes when cutting rotors. Use with Ammco Models 3000, 4000, 4100 and 7000 Lathes. Rels 2000. Uses 062 Bits. OEM#: All Tool 8586, Performance 8586, Hunter RP 8586, Ammco 10702, RELS 45006.
From the Manufacturer
Shark Toolholders are guaranteed to perform as good as any OEM Toolholder. Made to exacting standards, we offer an alternative to OEM without excessive cost. Use on disc cutting brake lathes and combination lathes when cutting rotors. Use with Ammco Models 3000, 4000, 4100 and 7000 Lathes. Rels 2000. Uses 062 Bits. OEM#: All Tool 8586, Performance 8586, Hunter RP 8586, Ammco 10702, RELS 45006.
- Guaranteed to perform as good as any OEM Toolholder
- Alternative to OEM without the excessive cost
- For bench and on-the-car lathes
- Use on disc cutting brake lathes
- Use on combination lathes when cutting rotors
