13 best power milling machine replacement parts

• Model: Al-310S; Type: X traverse; Voltage: 110V, 50/60Hz
• Rotate speed: 0-200 RPM; Max torque: 450 in-lb; Max feed rate: 650mm/min; Max return speed: 850mm/min
• Small volume and easy installation power feed, jog function operates at any feed speed; Excellent speed control in the entire range
• Noiseless direction changes, better surface smoothness and power table feed won't vibrate or strain in low speed
• Safety feature to protect transmission gear and electronic components, as to meet the requirements of ergonomics.The two gears of this power table feed will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time.

User questions & answers

Question:	i just got burnt bad from another co. on a power feed. will this feed run at the same speed in bouth directions at the slowest speed on the diel ? th
Answer:	My power feed travel's at .200 in 20 sec. or .600/min one direction and after back lash is taken up it feeds .200 in 15 sec. or .800/min. Which after 35 years in the machine shop business on a manual machine is acceptable. If you need better resolution than that you may need to spend the money and step up to a Servo brand but there's no guarantee your repeatability will be any better than that at, at least twice the cost.
Question:	Will it fit a 17mm shaft
Answer:	I had to bore the hole on mine to fit my older import 17mm shaft.
Question:	What size is the keyway on the brass gear? 3mm or 1/8”? My bridgeport series 1 has 1/8” key
Answer:	Hi, I do not know the size of the keyway, I gave the MOPHORN power feed away for parts. It failed working after two weeks. sent emails to Mophorn 3 times with no response, Then tried thru Amazon, but the time frame they give was over. Buy from someone else.
Question:	Can the adapter plate be removed? And if it can, would it be possible to mount this unit on a Bridgeport Z axis
Answer:	The "Z" axis is the Quill. The other ability to raise or lower is the knee. In answer to your question though - No. There are units for the knee but their torque is quite a bit more due in part to the weight of the table. You're lifting the X & Y axis.

Product features

Compact & Versatile

The compact power knee feed can work automatically at a constant speed or manually by pressing the speed control. And the circuit breaker protects the transmission gear and electronic components.​

Sturdy & Durable

The milling machine table power feed is made of rugged aluminum material. Its finish has been polished and resists corrosion and wear. That makes it work for a long time.

Quiet Operation

The power feed for mill adopts spiral bevel gears to move freely and quietly on the mill. Considering that it is noisy in the garage, it would be helpful that the feed cut noises.

Precise Bearing

The mill power feed is also equipped with precise bearings that ensure its smooth and stable movement. Less vibration and strain enhance the efficiency of the whole milling machine.

Excellent Performance

The power feed for milling machine is easy to install and operate. Only a little maintenance is enough for its long-term regular running.

Wide Application

The power table feed fits most vertical knee mills with a 5/8" shaft end, such as Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, etc.

AL-310S X-Axis Power Feed Kit

Our AL-310S x-axis feed kit features a robust shell and precise components. It works efficiently and quietly on a milling machine with a 5/8" shaft end. Besides, it is designed with buttons and knobs for simple operation. It is a good choice for your milling machine.

• New Version: Genmitsu CNC 3018-PRO is an upgraded version of 3018. All components do not need to be positioned, which greatly reduces the difficulty of assembly and improves the working accuracy. Moreover, the base height is raised to 4cm for a better stability.
• Integrated: With an integrated mainboard and custom software, communication between the software and hardware is seamless by design.
• Software: The Genmitsu uses Grbl, high performance, open-source software for controlling movement, and runs on Arduino. Its dependability and simplicity make Grbl an industry standard, so there's no lack of support and resources available when you get stuck.
• Versatile: Capable of cutting all types of plastics, soft aluminum, woods, acrylics, PVCs, and PCBs, the Genmitsu can be used on a wide range of projects and materials.
• Simple Assembly: Assembly instructions are provided, but if you get stuck, check out the SainSmart wiki page or contact us with any questions that arise.

User questions & answers

Question:	Can it engrave medallion/ medals? Are they consider soft aluminum ( Zinc Iron
Answer:	Kit comes with all parts (extrusions, acrylic, T-nuts, etc). to make the CNC enclosure as pictured. Don't need to get any other parts.
Question:	Can this CNC machine carve brass with the appropriate bits
Answer:	The front wall is 4mm, and others are 3mm. The top open is for connecting power cord/ USB cable and replace engraving materials conveniently.
Question:	How do I order the laser module
Answer:	Yes. There is a hole in the corner about 1" by 1.5"
Question:	Will this work with Fusion
Answer:	There is a video - not complicated

Product features

The Genmitsu CNC

Designed for the absolute beginner, the Genmitsu is a great tool for starting CNC learning. If wood-working is your hobby, you can use it to add features like curved words and exquisite patterns. If you are a student just learning CNC, it can help you engrave models that you are coding and designing.

You will find the SainSmart Genmitsu an excellent self-learning tool that allows you to DIY your great projects on a cost-effective platform without the risk of damaging expensive equipment.

Upgraded Power Adapter

The reoptimized power adapter comes with CE, FCC & UL certifications, with over-voltage protection, over-current protection, over-temperature protection, and short-circuit protection. The built-in smart integrated circuit design keeps the power adapter going against overheat on the unit and charging stably.

Offline Control

The offline controller module allows you to control the CNC router remotely without connecting to the computer. Your CNC router can be placed wherever you want, such as garages and workshops.

Redesigned Mainboard

Equipped with ABS case and fan, the performance and stability of the new mainboard have been greatly improved.

Open Source

It’s built on Arduino and Grbl (both open source). You could easily find support, tutorials, additional training, and inspiration elsewhere online.

Versatile

With a 1.8-inch effective engraving depth, the Genmitsu 3018-PRO is capable of cutting all types of plastics, soft aluminum, woods, acrylics, PVCs, and PCBs, and a wide range of other materials.

WHAT'S IN THE BOX

1 x 3018 PRO DIY Router Kit

1 x Extension Rod with ER11 Collet (3.175mm)

4 x Plate Clamps

10 x CNC Router Bits (Cutting Angle: 20 Degree; Shank Diameter: 3.175mm; Tip Diameter: 0.1mm)

1 x Offline Controller

1 x Power Supply

1 x English Manual

1 x CD

Product description

Specifications:

Material: Aluminum Alloy + Zinc Alloy

Color: Black + Red

Motor Speed: 20000rpm

Plug Type: US Plug

Voltage: AC 100-240V 50/60Hz

Output: DC 12V 4A          Power: 48W

6-in-1 Functions: Drilling, Sanding, Turning Lathe, Milling, Sawing, Wood Turning Lathe

Can Process Objects: Wood, Plastics, Soft Metal(Gold, Silver,, Aluminium,etc.

Package Size: 47.5 * 36 * 10cm / 18.70 * 14.17 * 3.94in

Package Weight: 4.5kg / 9.92 lb



Technique Data of Grinder:

Operating Space: 120 * 100mm / 4.72 * 3.94in

Grinding Materials: Wood, Plastics, Soft Metal(Gold, Silver, Aluminium, etc.)

Grinder Weight: 1.5kg / 3.31 lb

Grinder Size: 290 * 100 * 100mm / 11.42 * 3.94 * 3.94in



Technique Data of Wood Lathe:

Maximum Processing Diameter: 50mm  

Processing Length: 135mm

Grinding Materials: Wood, Plastics

Wood Lathe Weight: 2.0kg / 4.41 lb

Wood Lathe Size: 290 * 150 * 130mm / 11.42 * 5.91 * 5.12in



Technique Data of Metal Lathe:

Lengthened Large Slide Block Stroke: 140mm

Maximum Processing Diameter: 50mm  

Processing Length: 135mm

Grinding Materials: Soft Metal(Gold, Silver,Aluminium, etc.)

Metal Lathe Weight: 2.5kg / 5.51 lb

Metal Lathe Size: 290 * 90 * 220mm / 11.42 * 3.54 * 8.66in

Package List:

1 * Long Machine Bed

1 * Wood Board

1 * 3-Jaw Chuck

1 * Abrasive Disc

1 * Working Accessories

1 * Driller Rocker Arm

2 * Small Slider

1 * Big Belt Cover Block

1 * Grinder Protection Cover

2 * Right-angle Fixed Plate

1 * Power Transformer

1 * Plain Vice

1 * Big Slider

1 * Motor 

1 * Counter Shaft

1 * Tail Stock

1 * Short Machine Bed

8 * Copper 1-6mm Collets

3 * Bracket 

1 * Sawing Machine Base + Bracket

• This mini multipurpose machine can be assembled into 6 kinds of different lathes, but you can use only one kind of these lathes at the same time.
• Mini 6 in 1 lathe machine for DIY assembly of sawing machine, grinder, driller, wood lathe, metal lathe, miller.
• Great handcraft tool kit for DIY, hobby, model making, crafts, students, small parts processing, etc.
• Made of advanced aluminum alloy and zinc alloy, durable and non-deformable for usage.
• Very interesting to install and use, perfect gift for lathe DIY enthusiasts.

User questions & answers

Question:	What is the difference between the $233 (this) version and the $130 version
Answer:	Cheaper price for all plastic parts and easy to wear out, but be cautious parts were missing from my set and still waiting on them. Much better and faster service if you buy same item from eBay. Sorry Amazon but that is the truth, way to much run-a-round with you.
Question:	Can you please tell me what size collet this machine has? thx
Answer:	I would love to answer this but the collets and other items were missing from box , I am waiting for them to send missing items but looks like this is starting to become a war story. Now the hold up is China new year or event. Thinking now I should have bought on eBay , I would have had missing items by now not EXCUSES and email run-a-round. Good Luck, John.

Product description

Applicable VFD→ https://www.amazon.com/dp/B0775S7KFW?th=1



Application:

wood carving/engraving machine, advertisement engraving machine,CNC machine, small sized processing center, high speed centrifuge etc.



specification :

●Material: The cover is made of stainless steel, and the water jacket is high compression casting aluminum tube, red copper coil.

●Bearing: 7005 (2pcs)and 7002(1pc) bearings

● Voltage and rated current: AC 220V, 11A

● Max Rotation Speed:24,000 RPM

●Radial runout: 0.01mm

●Coaxality: 0.025mm (2.5 microns)

● Frequencies: 400Hz

●Size:80*213 (mm)

●Collet: ER20 collet, 6mm is standard

●Nut model: ER20-A(B)

●Cooling way: water cycling cooling way

●Lubrication way: high temperature resistance grease lubrication

●Power interface: GX16 water proof aviation plug marked with number 1, 2, 3, 4. Number 1, 2 and 3 inter-faces are connected with inverter power U, V, W respectively. Number 4 is connected with earth wire

• The item is Water Cooled 220V-2.2KW 3 bearings Φ80mm spindle motor.(come with a 6mm collet)
• The bearing adopts high speed angular contact bearing.And shell is cooled by liquid cycle to reduce the heat rise caused by high-speed rotation.
• Adopt precision steel ball holder to ensure the rotation precision of the spindle in high speed grinding.
• Lubricated with grease, which is resistant to 200 degrees high temperature.
• operating speed:6000rpm-24000rpm

User questions & answers

Question:	What is theprocess for getting a warranty replacement
Answer:	[email protected] This is my email, you can contact me through email, or through the Amazon background
Question:	Delta vfd? i have a delta 2.2kw vfd. are the parameters that need to be programmed the same? how do i program for the delta vfd
Answer:	I'm sorry that the parameters of VFD of different models are definitely different, but as long as the VFD can be set to 400Hz, it can be connected with the spindle and used
Question:	Is it a 2 pole or 4 pole spindle
Answer:	it is 2 pole thanks
Question:	Where can I buy replacement aviation connectors
Answer:	Yohii AC 250V 25A 4 Pin Waterproof Aviation Wire Connector PLS20-4 https://www.amazon.com/dp/B07CLNXRH7/ref=cm_sw_r_cp_api_i_ReFRDbHFYPYWW

• 【PREMIUM QUALITY】- CNC 3018 PRO is an upgraded version of 3018 CNC. The components do not need to be positioned, which reduces the difficulty of equipment and improves the work accuracy and stability. The frame and fixed parts are made of aluminum and Bakelite. Effective working area: 300 (X) x 180 (Y) x 45 (Z) mm (11.8 "x7.1" x 1.8 ").
• 【EASE OF USE】- The CNC 3018 pro supports systems as Windows XP, Windows 7, Windows 8, Windows 10, macOS, and Linux. For your convenience, we provide installation instructions in the USB flash drive, which is more portable than CD, and the files are not easily damaged.
• 【CONVENIENT CONTROL】- Connect to the computer via the USB port and be controlled by GRBL.The GRBL open-source software runs on Arduino for controlling movement. An offline controller is also included for easy remote control. Compared to 1" offline controllers, our 1.8" controller has three advantages: 1. No need to connect to a computer; 2. No need to download files. 3. Manually adjust the X, Y, Z-axis position to the starting point of engraving, and manually turn the spindle on or off.
• 【HIGH PERFORMANCE】- The 3018 pro comes with T8 screw rods driving units, three 42 stepper motors, and a 775 24V spindle motor with the rotational speed of 10000r/min.
• 【VERSATILE USE】- The CNC 3018 Pro is used for engraving all types of plastics, soft aluminum, woods, acrylics, PVC, PCB, etc. But the engraver is forbidden to cut or engrave hard metal, jade, or other hard materials.

User questions & answers

Question:	Does it come with the laser and bit engravers? Will it also engrave leather and soft metals
Answer:	No laser Only several bits
Question:	Can this work with Easel or Fusion software
Answer:	It depends on the motherboard you have.
Question:	Can you Cut plexyglass
Answer:	Yes but I would not suggest cutting as plexiglass tends to get hot and gum up quickly with friction, hot wire cutter is what I use for plexiglass cut-outs. However this will make pictures or designs on plexiglass, just don't go too deep or you'll just be melting plastic.
Question:	I am trying to find a way to cut a design in wooden coasters so that I can add an epoxy pour. Don't want to go all the way through. Will this work
Answer:	Yes, just work on hold downs and set your cut depths properly.

Product features

Durable Material

Made of aluminum and bakelite material, the Updated 3018 Pro for wood and metal is of good appearance, high precision, and durability.

3 Refined Axis

Three axes can realize plane engraving, with an effective working area of 300(X)x180(Y)x40(Z)mm (11.8"x7.1"x1.57"). The driving units consist of T8 stainless steel screw rods.

GRBL Control Board

Can be connected to a computer via a USB interface. Able to output 2P/3P, and support PWM, TTL functions, which can achieve greater practicality.

Offline Controller

A multifunctional offline controller is configured to control the engraving machine remotely. 1. Do not need to connect to a computer; 2.Do not need to download files. 3. Manually adjust the X, Y, Z-axis position to the starting point of engraving, and manually turn the spindle on or off.

Efficient Motors

Three 42 stepper motors are included on each of the three axes for smooth movement. The 775 24V spindle motor on Z-axis can reach the speed of 10000r/min.

Wide Application

As the laser cutter and engraver machine, it’s capable of engraving or milling all types of plastics, soft aluminum, woods, acrylics, PVCs, and a wide range of other soft materials.

• 【CNC 3018Pro MAX】- CNC 3018Pro MAX is an upgraded version of 3018-PRO. Control software: GRBL; Working area: 30x18x4.5cm; Spindle: 200W spindle motor, DC24V, 12000r / min. Supported System: Windows XP / Win 7 / Win 8 / Win 10.
• 【200W spindle motor】- Spindle: 200W, The main shaft adopts 52mm diameter professional air-cooled main shaft, rated at 200W, and the maximum power can reach 300W.
• 【All-aluminum alloy body】- The engraving machine adopts and all-aluminum body. The frame is composed of 4040 aluminum and 10mm thick aluminum. The XYZ components are all processed by CNC, non-aluminum plate splicing, high precision and high strength.
• 【New Control Board】Integrated Driver Chip + Fixed Heat Sink + External Fan + Sturdy Casing to extend the life of the control board, Self-contained short circuit protection, Not easy to damage. 12 Months Warranty.
• 【Simple Assembly】- Assembly instructions are provided, but if you get stuck, contact us with any questions that arise. Thank you!

User questions & answers

Question:	What does "non-aluminum plate splicing," mean
Answer:	No is the same. Because have X,Y,Z but the program use other code for change the direction to interact with the program used to run a like engraving or laser.
Question:	Why does the link you provide for the manual and software not work
Answer:	Sounds like a flexing problem. Can also be a large bit size (use 1/8" single flute bit), motor speed not high enough and too fast/deep of a cut. Remember this is a very light duty machine.
Question:	Can i add a laser to the 3018 pro max all aluminum version
Answer:	I never got to use the machine. The motor runs constantly. Has to be in the program. Will only install one way. DONT waste your money
Question:	does this unit come with limit switches and is the controller designed for them to be installed
Answer:	Hi, yes, the x moves left and right, like you're drawing a line in the sand and daring your "X" to cross it. Y goes toward and away from you as if you're pointing at someone then to yourself and saying "Y" are you talking to me? Z goes up and down like a zipper. Hope this helps, Andrew Perkins

Product features

3018Pro MAX 200W Spindle

Working area: 300*180*40mm

Frame size: 400*330*240mm

Control software: GRBL control

Construction: Full aluminum material

Spindle motor: DC24V, Rated power 200W, 12000rpm

Stepper Motor: 1.3A 0.25N.m

Power supply: Input: AC100-240V

Output: DC24V 10A /240W

Supported system: Windows XP/ Win 7/ Win 8/ Win10

• ★Mini multifunctional working table 6350,The table is suitable for mini drill and drill bracket series. It can also be applied to other suitable machines.
• ★The work table is composed of several adjustable dovetail slot aluminum alloy composition, can guarantee the minimum space and ensure the accuracy.
• ★Table size: 350 × 100 mm. Weight: 6.8 kg
• ★Adjustment in X direction: 180 mm. Adjustment in Y direction: 50 mm，Distance between grooves : 34mm
• ★Hand wheel with adjustable scale: A ring = 3 mm.

User questions & answers

Question:	what is the height of the 6330 model
Answer:	Height 3 1/4" to the top of table. With screws 5 1/2"
Question:	If i wanted to buy a set of hold down clamps what size t slot would i need
Answer:	My table came with a set of clamps. The head of the M8 screw fit in the T slot.
Question:	Can the hold down clamps and hardware be purchased separately? I’d like a 2nd set
Answer:	It is probably possible, but I make more as it is less expensive and more fun.
Question:	Do the dials only read metric
Answer:	Yes

Product features

The miniature precision multifunction Milling Machine Bench drill Fixture worktable X Y-axis adjustment working table 6350,

which can be applied to mini drill and drill bracket series or other suitable machines.

6350 is upgraded version of 6330,The base replace aluminum to iron .And the size ,weight is much more than 6300.

Specification:

X axis travel : 180mm

Y axis travel : 50mm

Distance between grooves : 34mm

Working table size : 350mmx100mm

Hand wheel with adjustable scale:A ring=3mm,

Package include:

1 * 6350 Milling Working Table , 1* accessories box, 1* manual

• 【PREMIUM QUALITY】- Made of 2020 aluminum profiles and black injection molding material for Long-term use and high precision. The working travel of this machine is 300(X)x180(Y)x45(Z)mm.
• 【EASE OF USE】- According to the instructions, the machine is easy to assemble. Simply connect to computers via USB port, and controlled by GRBL. Supports windows XP, win7, win8, win10,(32/64)
• 【CONVENIENT CONTROL】- Comes with an ingenious GRBL control board, featuring dual Y-axis, four-axis drive and full functionality.
• 【HIGH PERFORMANCE】- Equipped with T8 screw rods driving units, three 42 stepper motors, and a 775 (12-36V)24V spindle motor with rotational speed of 10000r/min.
• 【VERSATILE USE】- Used to engrave all types of plastics, soft aluminum, acrylics, PVCs, PCBs, etc.

User questions & answers

Question:	Is the gcode used for this machine the same or similar to the gcode used in a fff 3d printer
Answer:	No, it is not suggested to put on any extra thick protective case.
Question:	anyone else have this i have the machine working but am having trouble getting it to not gouge from start of work and from each letter or end of work
Answer:	You can grasp the phone like the picutre shows: https://images-na.ssl-images-amazon.com/images/I/71rNIwo8eHL._AC_SL1500_.jpg But for some phones whose camera is in the middle, the camera might be blocked.
Question:	Would this cut on a 15mil thick material that's 9"x9" to cut the outline of a printed image if I upload the matched size file, positioned it properly
Answer:	I just got my Samsung Galaxy Tab S4 in Dec 2018 for Christmas, and this cover fit perfectly!
Question:	Beginner's questions: A. The bit moves along the x-axis while the table moves along the y-axis, yes
Answer:	No, it does NOT FIT the S5e.

Product features

CNC 3018 DIY Engraving Machine

This CNC engraving machine is an excellent affordable self-learning engraving tool that allows you to try your DIY ideas and without the risk of damaging expensive equipment.

Durable Material

With the external dimensions of 400x300x240mm, frames are made of 2020 aluminum profiles,and the fixed parts are made of black injection molding material, which is of good appearance, high precision and durability.

3 Refined Axis

Equipped with 3 axis, able to realize plane engraving, with effective working travel of 300(X)x180(Y)x45(Z)mm. The driving units consist of T8 stainless steel screw rods, whose lead distance is 5mm, and the double copper nuts can eliminate the difference.

GRBL Control Board

The GRBL control board can be connected to a computer via a USB interface, featuring dual Y-axis, four-axis drive and full functionality. Laser is able to output 2P/3P, and support PWM, TTL functions, which can achieve greater practicality.

Efficient Motors

Equipped with three 42 stepper motor on each of three axis for easy movement. The 775 (12-36V)24V spindle motor on Z axis is able to reach the speed of 10000r/min.

Simple Assembly

The engraving machine comes with detailed user manual and assembly instructions. Simply hand assembled according to the installation instructions, then you can enjoy the delight of using engraving machine.

Wide Application

This CNC engraving machine is capable of engraving all types of plastics, soft aluminum, woods, acrylics, PVCs, PCBs, and a wide range of other soft materials.

Specifications

• Effective Working Travel: 300(X)x180(Y)x45(Z)mm (11.8"*7.1"*1.8")
• Shape Dimension: 400x300x240mm (15.7"*11.8"*9.4")
• Materials: 2020 Aluminum Profile & Injection Molding Material
• Driving Units: T8 Stainless Steel Screws
• Spindle Speed: 10000 rpm/min
• Input Power: DC 24V
• PositionaI Accuracy: 0.08-0.1mm (0.003"-0.004")
• Gross Weight: 17.1 lb (7.76 kg)

• ♞【Upgraded 3018 Pro-MCNC】 Integrated Driver Chip + Fixed Heat Sink + External Fan + Sturdy Casing to extend the life of the control board. Self-contained short circuit protection, not easy to damage.
• ♞【Easy to Install】 This CNC router kit comes with paper instruction, just follow the 8 steps to install.
• ♞【2500 m W Module】Can carve the kraft paper, wood, leather(wallet), bamboo, rubber. ▲It can’t engrave Unpainted metal.
• ♞【Usage of 775 Spindle】Can engrave on wood, plastic, acrylic and PCB engraving/cutting. However, it can't carve hard metals, jade and other hard things.
• ♞【How to Use】3018Pro engraver can be controlled by GRBL software and offline manual control. Knowing how to create Gcode is required if you are new to CNC.

User questions & answers

Question:	Can this cut all thr way thru plastic cases? I wanna use it to cut through game consoles. Let me know please
Answer:	Hi friend, this machine comes with a spindle and laser head, but the laser head cannot cut through plastic. The spindle can cut through plastic, about 3mm. Thank you!
Question:	What is the thickness of acrylic and wood can this machine cut through
Answer:	Hi friend, recommended within 3mm.

Product features

Please let us know if you are NOT familiar with CNC, our team will assist you to master how to use this 3018Pro-M engraver. Thank you!

Specifications:

• 3018Pro-M adds two side panels to prevent engraving fragments from flying out.
• Frame Materials: Aluminum + PF
• Frame Size: 40*33*24cm (15.7*13*9.4″)
• Effective Engraving Area: 30*18*4.5cm (11.8*7.1*1.8″)
• Power Supply: Output 24V, 5A
• XYZ Stepper Motor: 12V, 1.33A
• 775 Spindle: 24V, 0-10000 rpm (Software support gcode files)
• 2500mW Module: 12V, 445nm TTL PWM Control (Software support all picture formats)

Notice:

1. This machine for a full set of spare parts, shall be installed by the buyers.
2. Software used to create Gcode: Carbide Create, Artcam, MeshCam, Fusion360, Inkscape and so on.
3. Comes with a paper manual and a USB flash drive, which contains the control software. If you don't get it, please download it from the link we provide.

2500 mW Module -- 2 Axis Engraving

• Voltage: 12V, 0-2500 mW, adjustable power.
• It can engrave on wood, kraft paper, bamboo, MDF.
• It can cut through thin wood board, kraft paper.

2500mW Module Software v3.0.14

• Imported File Format: All picture formats, *.nc, *.ncc, *.ngc, *.tap, *.cnc.
• Supported System: Windows XP / Win 7 / Win 8 / Win 10.
• Speed: 0-1000 represents the ratio, not the speed value.

Spindle Motor -- 3 Axis Engraving

• Voltage: 24V; 10000 r/min.
• It can engrave on wood, bamboo, plastic, acrylic, MDF, PCB and soft aluminum.
• It can cut through thin wood, bamboo, plastic, acrylic, MDF, PCB.

Grbl 1.1f Software for Spindle Motor

• Imported File Format: *.nc, *.ncc, *.ngc, *.tap, *.cnc.
• Supported System: Windows XP / Win 7 / Win 8 / Win 10.
• Speed: 0-1000 represents the ratio, not the speed value.

Spindle Motor -- 3 Axis Engraving Works

• File Format (gcode): *.nc, *.ncc, *.ngc, *.tap, *.cnc.
• Software used to create Gcode: Carbide Create, Artcam, MeshCam, Fusion360, Inkscape.

2500 mW Module -- 2 Axis Engraving Works

• In addition to the 2 Axis software we provide, you can also use lightburn software;
• File Format: All picture formats, *.nc, *.ncc, *.ngc, *.tap, *.cnc.

Product description

BINSTAK Carbide Inserts Cutters Knives Replacement Blades Square Straight 12 x 12 x 1.5mm Woodworking Spiral Helical Planer Head 10pcs



✔Their solid carbide micro grain tips give superior tool life in a wide variety of materials for all general spiral planer head in hard woods and soft woods, the insert can be used for the heads of your jointer and planer.



✔35°cutting bevel, polished to a mirror finish for smoother cutting work.



✔Replacement carbide tips for CNC router fits NITOMAK Insert Surfacing Router Bit 3-Wing



✔COST-EFFECTIVE. Rotate or replace the two or three small knives that were affected, and you are ready to get back to work. Leaves smooth finishing after cut.



Specification:



Material: Solid Tungsten Carbide



Rockwell Hardness: 93.0HRA



Shape: Square Straight 4-edges



Hole: Straight hole



Length - 12mm



Width - 12mm



Thickness - 1.5mm



Bevel - 35 degree



Applications: woodturning, woodworking



Quantity: 10pcs/box



Package Includes:



10 * Carbide Insert

1 * Plastic Box

• 12mm*12mm*1.5mm (length*width*thick), 35°angle, Hardness: 93HRA, 4 cutting edges.
• Made of solid tungsten carbide, high strength and hardness, own longer use life, sharp and durable.
• Each blade has 4 sharp edges, if one is dull, just change it to the other side. More effective!
• Ideal for giving you a smooth finish on curved, concave surfaces, hollowing jobs and for general turning applications. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc.
• Fits for Spiral/Helical Planer Cutter Heads, Rougher Wood Turning Tools. Replacement carbide tips for CNC router fits NITOMAK and BINSTAK Insert Surfacing Router Bit 3-Wing.

User questions & answers

Question:	Where are made? Usa or China
Answer:	I’m not totally sure but since they are sold by nitomak I assume they are made in China.

Product description

Nose cap used to hold spindle inside the quill of the series i heads.

• Genuine Bridgeport Knee Mill replacement part
• Manufactured to OEM specifications

Product description

MADE IN THE USA! Collet Alignment And Special Set Screw - This Is At The Bottom Of The Spindle. Sold As A Set OEM 2193540 & 1011545. This Will Fit The American Made Bridgeport. See Our Other Quality Bridgeport Products In This Store Including Repair Kits, Replacement Pulleys, Belts And Clock Springs. Shipping Weight: 1Lb.

Product description

Set 8 Pcs Dp16 No1 :Z12~13; No2 :Z14~16; No3 :Z17~20; No4 :Z21~25; No5 :Z26~34; No6 :Z35~54; No7 :Z55~134; No8 :≥135

• Set 8 Pcs Dp16 ：pressure angle: 14.5 degree
• Set 8 Pcs Dp16 ： Outside Dia: 55mm
• Set 8 Pcs Dp16 ：inner Bore: 22mm
• R8 shank gear cutter holder fitting for hole 22mm gear cutter
• R8 shank gear cutter threaded 7/16(Inch)

User questions & answers

Question:	Is this module
Answer:	I believe so, definitely not carbide. They work well just keep them lubricated and don't get over jealous. I've just started learning to cut gears and my first attempt came out very well.
Question:	Are the cutters HSS
Answer:	If the drill chuck is mounted in an R8 spindle. Pop the chuck out and chuck this up. Else, no. Plus how are you rotating the gear? How are you moving it across the cutter with any precision? You normally need an indexer and a mill table, or possibly a mill/drill with a moving table. I have good results with this set but I use a Bridgeport and an indexer.
Question:	Can I stick this in a drill press? For a small gear
Answer:	MAX RPM is 35000 Recommend 25000