12 best dremel chainsaws

Product description

The Dremel Sharpening Kit contains three attachments that let you maintain your outdoor garden tools with ease. The Lawn Mower Sharpener sharpens your lawn mower blades for a healthy, beautiful lawn. The Garden Tool Sharpener sharpens garden tools such as shovels, shears, hoes and axes so they work more efficiently. And the Dremel Chain Saw Sharpener lets you sharpen dull, slow-cutting chain saw blades. Instructions included. The Dremel A679-02 Sharpening Kit Includes: Garden tool sharpening attachment, Lawn mower sharpening attachment, Chain saw sharpening attachment, Gauge, Spacers, Instruction Manual, Wrench, Sharpening stones: 453, 454, 455 and 932. Fits Dremel Rotary tool model(s): 4200, 4000, 400, 3000, 300, 398, 395, 285, 275, 200, 100, 8220, 8200, 8100, 800, 770.

From the Manufacturer

The New Dremel A679-02 Sharpening Kit gives the user the added capability of sharpening chainsaw blades, mulching lawn mower blades, as well as various gardening tools.

• Lawn mower sharpener guide provides optimal sharpening angle for all lawn mower blades
• Easily sharpen dull, slow-cutting chain saw blades
• Guide helps restore edge on garden tools such as shears, hoes, and shovels
• 1-year warranty & USA BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI.

User questions & answers

Question:	will this work with craftman rotary tool
Answer:	That's what I did to mine and it worked for me. I bought extra spike type nails for added stability.
Question:	Does this kit come with a 5/32 stone
Answer:	Yes, that's exactly what I used it for.
Question:	Does anyone know if this sharpening attachment fits a Black & Decker RTX-B 3-Speed RTX Rotary Tool
Answer:	All I know is it worked for me I put a couple inches of Bark in and it works just fine. Matter fact it's exactly the product I was looking for
Question:	Has anyone tried using this kit to sharpen a sword
Answer:	Yes, it's very similar to it. I put it on a walkway to my front door, holdinging gravel away from my flower beds that have bark dust. However, I am very disappointed by the way it expands in sunny weather. It looks awful in the heat, then it shrinks when it cools down. I wouldn't install it again. I'd spend the extra money on thicker product.

Product features

Sharpening Kit: A679-02

Flex Shaft: 225-01

A true must-have accessory for all hobbyists and do-it-yourselfers, the Dremel 225 Flex Shaft Attachment has a flexible, 36-inch shaft that attaches easily and adds an improved level of versatility to your project capabilities.

Work Station: 220-01

Ideal for crafts, hobbies, metal working, and a variety of around-the-house jobs, the 220-01 Dremel Work Station transforms any Dremel rotary tool into a tabletop drill press. It can be bolted on to your workbench, and it has the versatility to operate as a tool holder, flex shaft holder, and drill press.

Plunge Router: 335-01

Turn your Dremel rotary tool into a mini plunge router and cut perfect decorative edges, straight slots or rout freehand. Plunge feature lets you start your cut in the middle of your work piece.

Shaper/Router Table: 231

Gain the flexibility and precision you need to shape, detail, and sand a variety of soft and hard woods with the Dremel 231 Shaper/Router Table.

Detailer's Grip: A577

The handy Dremel Detailer’s Grip attachment is a quick and easy to use extra support for any rotary tool having a threaded nose piece. It transfers the weight of the tool to the palm of your hand for improved tool balance and control.

Sanding/Grinding Guide: A576

Stabilizes a handheld tool by providing an edge guide or serves as a work platform when the tool is mounted in a secure position.

Shield Kit: A550

Increased comfort from debris and sparks during cutting, grinding, sanding, and polishing applications.

Sharpening Kit: A679-02

Give your go-to tools a new lease on life. The A679-02 Sharpening Kit includes three of our most-popular attachments: the Dremel chain saw sharpener, lawn mower sharpener, and garden tool sharpener.

Multipurpose Cutting Kit: 565

Allows for sturdy controlled cuts in a variety of materials; including drywall, laminate, fiberglass, plastic and vinyl siding.

Tile Cutting Kit: 566

Turn your Dremel tool into a high-powered rotary tile cutter. Ideal uses include cutting around fixtures or plumbing during bathroom or kitchen tile installations and creating mosaics.

Not appropriate for cutting floor tiles.

Grout Removal: 568

Get the grout out and make re-grouting a breeze. With our grout removal attachment, you can turn your favorite Dremel rotary tool into a powerful, electric grout removal machine. Best of all, the attachment's unique shape keeps the bit at the perfect cutting angle and keeps it centered between the tiles.

Right Angle: 575

Enhances the versatility of your Dremel rotary tool by allowing you to get into hard-to-reach areas. Whether you're drilling, grinding or cutting, all sorts of hard-to-reach areas become instantly accessible with the Dremel 575 Right Angle Attachment.

Mini Saw: 670

A unique, innovative rotary tool accessory that allows you to cut through wood and wood-like materials as never before.

Circle Cutter and Straight Edge Guide: 678-01

The simple way to cut circular holes in many types of materials. Convenient measurement guides in both inches and centimeters, so you can out the right-sized circle every time.

Dust Blower: 490

Offers an innovative solution for improving visibility when using your Dremel rotary tool. By removing fine debris from your line-of-sight, our small air blower is great for detailed projects, sanding, engraving, and carving.

Multi-Vise: 2500-01

Helps you secure your project or free up a hand for extra control when using your Dremel rotary tool. The removable cushioned jaws help protect delicate work pieces while providing a firm, steady grip.

Product description

Dremel 454 3/16" Grinding Stone, 2 Pack

From the Manufacturer

For quick, easy sharpening of chain saw blades. A precision-ground abrasive made for extended usage. This brown sharpening stone has a diameter of 3/16". Use with Dremel chain saw sharpening attachment 1453.

• The product is 3/16"ORG Grinding Wheel
• Ideal for sharpening chain saw blades, quickly and easily
• A precision-ground abrasive made for extended usage
• Use with Dremel chain saw sharpening attachment 1453
• 3/16" diameter

Product features

Silicon Carbide Grinding Stones

Tougher than aluminum oxide points, these are made especially for use on hard materials such as glass and ceramics; ideal for sharpening, deburring and general purpose grinding. Typical uses include removal of stilt marks and excess glaze on ceramics and engraving on glass. 1/8" shank.

Alumnium Oxide Grinding Stones/Wheels

Round, pointed, flat - you name the shape and there is one available in this category! These are made of aluminum oxide and cover virtually every possible kind of grinding application. Use for sharpening lawn mower blades, screwdriver tips, knives, scissors, chisels and other cutting tools. Use to remove flash from metal castings, deburring any metal after cutting, smoothing welded joints, grinding off rivets and removing rust. 1/8" shank.

Aluminum Oxide Abrasive Wheel/Point

The aluminum oxide abrasive wheel (500) is perfect for cleaning, deburring, removing rust, and polishing most metals, including stainless steel. 1/8" shank.

The aluminum oxide abrasive point (516) is great for finishing work and light deburring. It can be used for paint and rust removal without removing the base material! 1/8" shank.

Chain Saw Sharpening Stones

Precision-ground for quick, easy sharpening of chain saw blades. 1/8" shank. 2 per pack.

• 【160w & 6 level speed】160w electric rotary tool with pure copper motor, it supports variable 6 level speed, meet the requirements of diy; handle with led light can work clearly in dark, and the auxiliary handle can realize precise operation.
• 【145pcs accessories】covering all needs of cutting, grinding, milling, cleaning, polishing, drilling, sanding, and engraving. high-quality multifunctional milling cutters can easily cut wood, plastic, fiberglass, gypsum board, laminate, and aluminum and vinyl siding, it‘s ideal for multi-purpose cutting.
• 【Alumina abrasive band &tin bronze chuck】instead of ordinary sand ring, our sand ring of alumina abrasive is bonded with a dense emery cloth to solve the problem of cracking in use. 3-jaw sandwich core made of tin bronze chuck is more flexible than conventional aluminum, which fits tightly to the handle of the accessory and improves the concentricity, ensuring that there is no shaking during use.
• 【All-covered soft rubber & abrasive buff 】made from soft rubber, this rotary tool is more comfortable to use for a long time. the abrasive buff with handle is very suitable for use on metal, glass, wood, aluminum and plastic, and can easily remove rust on brass.
• 【Storage & support】re-designed storage bag is convenient for placing accessories and preventing damage to the machine from falling. if you have any question about this item, please feel free to contact us, tilswall team is always serving for you!

Product description

Dremel Chainsaw Sharpening Stone

• Shank: 1/8"
• Cutter Size: 3/16" Diameter X 1" Tall
• Use With Sharpening Kit #A679-02
• Ideal For Sharpening Chain Saw Blades, Quickly And Easily
• Precision Ground Abrasive Stone For Quick, Easy Sharpening

Product description

Dremel 453 5/32" Grinding Stone, 2 Pack

From the Manufacturer

For quick, easy sharpening of chain saw blades. A precision-ground abrasive made for extended usage. This gray sharpening stone has a diameter of 5/32". Use with Dremel chain saw sharpening attachment 1453.

• Use with Dremel chain saw sharpening attachment 1453
• Manufacturer determines stone size
• Gray - 5/32"

User questions & answers

Question:	What is the correct size stone for 3/8 pitch chain
Answer:	3/8 inch low profile chains typically require a 5/32 inch file, standard 3/8 inch chains require 7/32 inch file. Keep in mind a stone will wear away more than a file. As it wears you may experience less than optimum results. In any case one needs to determine whether they have a low profile or standard 3/8 inch chain.
Question:	One area says 2 pack, while lower in the listing it reads pack of 1. What quantity did you receive? TY
Answer:	Been since 2011 for me, I think it was 2, need to buy more thanks for the reminder. BTW they work great!!!

Product features

Silicon Carbide Grinding Stones

Tougher than aluminum oxide points, these are made especially for use on hard materials such as glass and ceramics; ideal for sharpening, deburring and general purpose grinding. Typical uses include removal of stilt marks and excess glaze on ceramics and engraving on glass. 1/8" shank.

Alumnium Oxide Grinding Stones/Wheels

Round, pointed, flat - you name the shape and there is one available in this category! These are made of aluminum oxide and cover virtually every possible kind of grinding application. Use for sharpening lawn mower blades, screwdriver tips, knives, scissors, chisels and other cutting tools. Use to remove flash from metal castings, deburring any metal after cutting, smoothing welded joints, grinding off rivets and removing rust. 1/8" shank.

Aluminum Oxide Abrasive Wheel/Point

The aluminum oxide abrasive wheel (500) is perfect for cleaning, deburring, removing rust, and polishing most metals, including stainless steel. 1/8" shank.

The aluminum oxide abrasive point (516) is great for finishing work and light deburring. It can be used for paint and rust removal without removing the base material! 1/8" shank.

Chain Saw Sharpening Stones

Precision-ground for quick, easy sharpening of chain saw blades. 1/8" shank. 2 per pack.

Product description

Sharpen your dull chainsaw blades faster and easier with the diamond sharpening bits from Hobby Tool Supply. Each of the four bits is coated in industrial diamonds and features an industry standard 1/8" shank.

• 1-3/4" overall length; 3/16" burr diameter; 1/8" diameter shank
• 120 - 150 grit industrial diamond coating
• Designed for use in rotary tools that accept a 1/8" shank
• Set includes 4 bits

User questions & answers

Question:	Is this available in 3/16" size? That's what my Husqvarna needs
Answer:	Do a google search that is how I fond them.
Question:	Where are these made
Answer:	Good question wish I new
Question:	What size do i need for 90px052x (oregon) chain
Answer:	Oregon specifies 4.5 mm, so 5/32" would be smaller. 3/16" is a little large, but closer to Oregon spec.
Question:	Will these bits work for a 14 inch electric chainsaw
Answer:	Most 14” chainsaws have chains that use a 5/32” bit. So I doubt it. But I think they sell them that size too. But you should make sure if the chain you have.

Product description

Specification:

Material: Carbide (tungsten steel)

Surface Treatment: Titanium Coated

Shank Diameter: 3.175mm

Cutting Edge Diameter: 0.8-3mm ( 0.8,1.0,1.2,1.4,1.6,1.8,2.0,2.2,2.4,3.0mm)

Cutting Edge Length: 12mm

Overall Length: 37mm

Quantity: 1set (10pcs)



Application:



PCB,SMT, CNC, Mould, pastic fiber, carbon fiber, super hard wood, printed circuit board, other precision parts processing.







Package Includes:



10 pcs Carbide End Mills

• These carbide end mills are Made of ultra-fine grain carbide material (tungsten steel), with great cutting and milling performance.
• Carbide rods and tungsten steel rods, with high hardness, high wear resistance, high strength, resistance to bending, anti-impairment and long tool life.
• Coated with titanium Improves the speed and feed rate of the tool, and also Improve the surface wear resistance.
• Range of processing: PCB, SMT, the CNC, mold, plastic, copper, stainless steel and other precision metal parts processing.
• Overall Length: 37mm,Shank Diameter: 3.175mm

User questions & answers

Question:	Where are these manufactured
Answer:	The rpm for the Milling Bits, more than likely, is based on the rpm of the dremel tool you are using. How tolerant the bit is would depend of the material you are carving or working with. In the description they are noted as high strength, etc. they would work well.
Question:	What is the rated maximum rpm
Answer:	They do cut from the side.
Question:	Will these cut from the side or only from the end? I intend to cut slots in .020 brass sheet
Answer:	Hi, yes, it fits your dremel 3000.
Question:	wil it fit in the end of my dremel
Answer:	These will not unstick a bolt. They will grind off the head of a bolt, eventually

Product description

This heavy-duty, long-lasting, replacement sharpening stone fits the electric Sure Sharp.

• Includes three 5/32" (4.0 mm) replacement shapening stones
• Use with Oregon electric sure sharp handheld grinder to easily sharpen your saw chain
• These stones leave an excellent cutting edge on saw chain and are easily replaced on most electric chain sharpeners
• Carded
• 5/32 inches
• Ideal for sharpening chain saw teeth

User questions & answers

Question:	are these good for sharpening carbide saw chain
Answer:	Love it, I put it in a dremel. No more file.
Question:	Dr 12" chain saw lithium power oregon chain what size is teeth
Answer:	The answer should be on the bar of the saw
Question:	Is this a solid carbide replacement stone
Answer:	No these are abrasive grain stones.
Question:	what size shank is the
Answer:	As near a I can measure, the shaft from the stone to the end is 25mm, and the overall length is 44mm. The shaft diameter is 2.5mm.

Product description

Get your chainsaw razor sharp. Instead of sharpening the chain by hand with a file and guide you can bring dull and slow-cutting chains back to life in minutes. Choose the grinding stone that fits the size of your chainsaw, attach the stone and the sharpening angle guide and your Multi-Tool do the work.

User questions & answers

Question:	Is sharpening a chain with this kit really as easy as it looks
Answer:	I don’t know. I have not used mine yet. I loaned my stemmed to my daughter. When she returns it, I can test the kit out.
Question:	Can a full chisel chain be sharpened wilth a dremel
Answer:	I use it to sharpen an 18 inch Husqvarna I'm not sure what you mean by full chisel chain
Question:	Will this work on a Chicago Electric dremel like tool
Answer:	I do not know for certain, but my guess is that it will likely not work with anything other than a Dremel rotary tool as the plastic guide piece screws onto the tool in place of the removable plastic collar.

Product description

Exceptional Products For Exceptional Yards. Great yards demand equipment that's as dedicated and hardworking as you. Fortunately, the Husqvarna range of lawn and garden equipment offers everything from lawnmowers and ride-on mowers to trimmers and chainsaws to let you master your great outdoors. You and Husqvarna - together we will make your yard the envy of the neighborhood.

• For Models 340, 345, 346XP, 350, 351, 353
• Everything you need to file your chain
• Includes file handle, combination filing gauge, 2 round files, and 1 flat file for depth gauges
• The combination gauge helps ensure the correct filing angle and simplifies the filing process

User questions & answers

Question:	would it work with a stihl 261c? (the same .325 inch
Answer:	.325 Stihl's that I know of uses a 5/32 file and not a 3/16 file That Husqvarna/Oregon uses.Don't be misslead. There are two(that I know of) .325 sharpeners that are Husqvarna. This one is for the ""narrow kerf"" bar (H30, 95VP).The one you ~might~ be looking for 505698194 (H21,22,23,25 & 26). Look on your bar and or bar chain for replacement model number and size of file needed.
Question:	will this sharpner work on my
Answer:	Yes, this will work on the 450 with a .325 chain pitch.
Question:	it works with 445e models
Answer:	It will work on all chains with a .325 pitch no matter what model or manufacturer.
Question:	Will this version of the file kit fit my new 450 in
Answer:	Hi Luke. Yes, you'll be good to go with this file kit. Thank you so much for considering Husqvarna for your outdoor power equipment needs.

Product description

Dremel Chainsaw Sharpening Stone

• Shank: 1/8"
• Cutter Size: 7/32" Diameter X 1" Tall
• Use With Sharpening Kit #A679-02
• Ideal For Sharpening Chain Saw Blades, Quickly And Easily
• Precision Ground Abrasive Stone For Quick, Easy Sharpening

User questions & answers

Question:	is the stone gray or pink
Answer:	Mine's Pink , or was till I used it. Anyway it didn't work out for me to sharpen the chain by hand. Just a waste of time . I bought a new chain. There are people who have special accurate machines for sharpening chain blades.

Product description

Premium Quality Sharpener Burrs



Our chainsaw diamond sharpener burrs will sharpen faster and last longer than any traditional steel sharpener.







Features:

• Quantity: 4 Burrs
• Total length: 1-3/4"
• Shank Diameter: 1/8"
• Burr diameter: 7/32"
• Grit: 120-150

• Superior Quality Sharpener Burrs
• Quantity: 4 Burrs
• Total length: 1-3/4" Burr diameter: 7/32" Shank Diameter: 1/8"
• Grit: 120-150

User questions & answers

Question:	are these threaded at the end
Answer:	No, they are not threaded. The 7/32 end has the diamond coating, and the 1/8" end is smooth and goes into your Dremel arbor.
Question:	What size would be needed to sharpen H30-72 (95VP) Pixel Saw Chain, .325-Inch by .050-Inch ? (husqvarna 18inch 450e
Answer:	Husqvarna states to use a 3/16" file for the H30-72 (95VP) Chain. Amazon offers the diamond sharpeners in 3/16" diameter.
Question:	could these be used in an electric drill to sharpen a chain
Answer:	Yes, they can be used in a drill to sharpen the chain. I used a Dremel 5000 to sharpen the chains and it did a great job.
Question:	can this be used in a Dremel
Answer:	It can be used in any driver that can be turned on and off with a single action without having to relocate the hand. I didn't have an appropriate Dremel driver, so I use a Proxxon power carving driver when I sharpen my saw chains.