12 best high temperature epoxys

Product description

J-B Weld ExtremeHeat is formulated to allow for repairs to iron, steel and metal in high temperature environments (2400°F / 1300°C). When fully cured, this metallic compound can be drilled, machined or sanded. It is great for repairing cracks, small gaps, seam connections or holes in exhaust manifolds, pipe connections, mufflers, catalytic converters, outdoor grills, fire boxes, gas and commercial furnaces and water heaters. This product is water based, non-flammable and contains no solvents or Volatile Organic Compounds (VOCs).

• JB WELD EXTREME HEAT: Is formulated for repairs to iron, steel and metal in high temperature environments 1000°F / 538°C. Non-flammable, it contains no solvents or Volatile Organic Compounds (VOCs).
• THE ORIGINAL COLD WELD: JB Weld was developed as an alternative to torch welding. Designed to be effective in extreme environments, once it sets, it creates a permanent bond stronger than steel.
• SIMPLE TO USE: When fully cured, this metallic compound can be drilled, machined or sanded. It is great for repairing cracks, small gaps, seam connections or holes.
• VERSATILE & DEPENDABLE: Ideal for repair work on : exhaust manifolds, pipe connections, mufflers, catalytic converters, outdoor grills, fire boxes, gas and commercial furnaces and water heaters.
• DO IT YOURSELF: Big or small, you can DIY it with J-B. Our heavy duty adhesives repair & restore it right the first time. JB Weld delivers the legendary performance of the World's Strongest Bond.

User questions & answers

Question:	Can this be used to"glue 2 pieces of metal together
Answer:	Yes, it can glue metal, that's what it's designed for. What you must consider is the type of stresses the metal is subject to. Any glue joint will be weaker than the original homogeneous metallic structure
Question:	can I use this thing on coolant pipe for little bit leak
Answer:	it will only work on metal, not plastic or rubber. coolant would have to be drained prior to application as part must be clean and dry. 24HR cure time is minimum. product has the consistency of cake batter, not putty as is the case with most other JB Weld materials. might require several thin layers applied over time so don't plan on an overnight fix. has held up well in fixing catalytic converter which is obviously very hot at operating temp.
Question:	Is this waterproof
Answer:	Not in my experience. I used it to fix a hole on my barbecue and some moisture got in contact which caused it to crack and fall apart.
Question:	Can I use this to repair a stove burner grate? I dropped it and the pieces need to glued together. Thanks
Answer:	No, this will not provide any type of structural support. This is a filler, we also do not recommend any of our products to be in direct flame. Thank you, J-B Weld Support

Product description

J-B Weld High Heat Epoxy Putty High Heat is a hand mixable epoxy putty stick specifically formulated to bond and repair materials that will be exposed to high temperatures in automotive and industrial maintenance applications. It cures to a tough, hard bond with little to no shrinkage. This industrial-strength product outperforms conventional epoxy putties at high temperatures and sets in 1 hour at room temperature. After 8 hours, it can be drilled, tapped, machined, ground, filed and painted. High Heat is rated at a tensile strength of 800 PSI and cures to a machine grey in color. It is able to withstand continuous heat exposure of 400 degrees F and intermittent heat exposure to 550 degrees F. Use on: Automotive Metal And more Instructions 1. Cut: Remove required amount of putty. 2. Mix: Thoroughly knead putty with fingers to a uniform color. 3. Apply: Press putty firmly to the surface to be repaired. J-B Weld is proudly made in the USA

• J-B WELD HIGHHEAT: A hand mixable two part epoxy putty stick that is formulated to repair and rebuild materials that will be exposed to high temperatures in automotive and industrial maintenance applications. J-B Weld HighHeat is designed for DIY repairs on exhaust manifolds, tail pipes, mufflers, engine blocks, duct work and other various high temperature projects.
• CURE AND SET TIME: After kneading the two part formula together by hand, HighHeat takes 1 hour to set and cures in 8 hours. J-B Weld HighHeat set and cure color is machine grey.
• PRODUCT FEATURES AND STRENGTH: J-B Weld HighHeat has lap shear strength of 800 PSI at room temperature and 600 PSI at 400oF (204oC) or more. HighHeat is able to withstand continuous heat up to 450oF (232oC) and intermittent heat of 500oF (260oC). HighHeat is 3x stronger at higher temperatures than conventional epoxy puttys and can be tapped and drilled.
• MAJOR USES: Exhaust Manifolds, Tail Pipes, Mufflers, Engine Blocks, Duct Work, Machinery and other high temperature equipment.
• DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.
• 3 times stronger at high temperatures
• Withstands continuous heat up to 450 degrees Fahrenheit, and intermittent heat up to 500 degrees Fahrenheit

User questions & answers

Question:	J-B does NOT recommended this for exhaust manifold use, per their site FAQ. My truck's manifold is cracked: Would furnace cement work on such a crack
Answer:	I am not familiar with furnace cement, but I would doubt such cement would stand the pressure from leaking gasses. However cast iron exhaust manifolds canbe successfully welded.
Question:	I striped out an oil drain plug on a generator motor. But there is a second drain on the other side of the engine. Will this seal in oily environment
Answer:	if you are thinking about plugging the hole, yes, but if you have access to the inside of the pan i would use it to attach a plate to the inside. you could also grind down the outside free of rust / dirt and use it to bond a plate to the outside. i would be concerned about just using it as a plug, where using it to bond something to the pan would not span a 1/2 to 5/8 in. gap. you might even use a quarter or a nickle or something stainless that will not rust. after it sets, hit it with some high temp paint.
Question:	can you use this to seal a leaking transfer case seal? (would work ? instead of having to replace the seal
Answer:	I guess it depends on if you ever want to fix it right. Once you use this stuff thats how it will be forever, it's not pliable or removable
Question:	Will this fix a hole in a muffler
Answer:	I used it on the muffler and tailpipe on my Honda four wheeler and it has been holding up well. If fact that's what I bought it for originally. The holes I patched you could cover with a dime.

Product features

Epoxy Putty

HighHeat is a hand-mixable epoxy putty stick specifically formulated to bond and repair materials that will be exposed to high temperatures in automotive and industrial maintenance applications. It cures to a tough, hard bond with little to no shrinkage. This industrial-strength product outperforms conventional epoxy putties at high temperatures and sents in 1 hour at room temperature. After 8 hours it can be drilled, tapped, machined, ground, filed and painted. HighHeat is rated at a tensile strength of 800 PSI and cures to a machine grey in color. It is able to withstand continuous heat exposure of 400°F and intermittent heat exposure of 550°F.

Product description

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B Weld has a tensile strength of 3960 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550ºF when fully cured.

• J-B WELD ORIGINAL PRO SIZE: Professional 5 OZ Tubes of the Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces and creates a bond stronger than steel. Perfect for DIY household, automotive, marine, craft repair and much more.
• CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original set and cure color is dark grey.
• VERSATILE AND DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius. When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid.
• SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass.
• DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.

User questions & answers

Question:	Could this be used to fix a small (1 x 1/4 inch) crack in a dryer drum? Is there danger it will come off on the clothes
Answer:	When I have had questions about JB Weld products I have called JB Weld & they have answered with good information. Your problem is special because of the temperature that the drum attains. Ask JB Weld.
Question:	Is this product electrically conductive
Answer:	It is NOT electrically conductive. JB Weld is classified as an insulator my the manufacturer (see JB Weld FAQs). In fact it's rated to be microwave safe. Metallic conductors should never be used in a microwave oven, but JB Weld is OK for microwave use.
Question:	I have a number of small leaks in an older aluminum boat-- would JB work for a repair on this as a weld/filler for small punctures? thanks
Answer:	This is a general purpose epoxy that worked great for me on cast iron. It does say you can use it for marine purposes, however you might also consider their product made specifically for water:http://www.amazon.com/J-B-Weld-8277-Water/dp/B000BRQ0TW/ref=sr_1_5?ie=UTF8&qid=1392730373&sr=8-5&keywords=jb+weldor look into the Permatex product made specifically for metalshttp://www.amazon.com/Permatex-84109-PermaPoxy-Minute-Multi-Metal/dp/B000ALDXV2/ref=sr_1_1?ie=UTF8&qid=1392730252&sr=8-1&keywords=metal+epoxy
Question:	block crack between cyls 5 & 7 against the head, at the narrowest point between cyls. both cyls are sleeved. will jb hold the temp without breaking do
Answer:	thanks gpower. was looking online at the temp ratings of different epoxy products, actually found one @2100F, but with low tensile strength. I would like to stay away from welding as the crack is five eights long and sleeved at each end. just now pressure testing and the waterjacket has held 30 lbs for 12 hrs. I may also entertain some of the hi-tech block sealers, if it continues to hold pressure. thanks again for your input, and wish me luck putting life back in this old hemi. Dean

Product features

Original Twin Tube Epoxy

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond with tensile strength of 5020 PSI after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color and fully cures in 15-24 hours.

Additional Attributes

• Can withstand 550°F/287°C
• Compatible Surfaces: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile, Fiberglass and more!
• Repairs/Uses: Household, Automotive, Marine, Plumbing, Crafts, Outdoor Equipment, Agriculture Equipment, Motorcycles, Toys, Boats, Watercraft, In/Outboard Engines, Deck & Hull Accessories and more!

Product description

Loctite Hysol 9340 is a general purpose adhesive with exceptional high temperature performance. This easy to use epoxy is can be used in many demanding applications where resistance to chemicals and heat extremes are required. Hysol 9340 can be used on many different substrates such as wood, metal, ceramics, and most plastics. This exceptional epoxy can be sanded and drilled and painted after curing making it ideal for finish work.

• Excellent Heat Resistance
• Good Tensile Sheer Strength
• Resistant to Automotive Fluids
• Sandable
• Easy to Mix

User questions & answers

Question:	Could i use this on a bbq grill as a gasket
Answer:	It hardens, it’s not rubbery it would not make a good gasket. We used it for our chimenea
Question:	Is this flexible after setting up? I need something for gluing sanding belts
Answer:	Not very Flexible
Question:	Will it work on glass
Answer:	YES, IF ETCHED..
Question:	Will this withstand the temperatures from an exhaust manifold which has a crack in it
Answer:	High temp is 180 deg f. Your manifold can hit 800 or more depending on how close you are to the exhaust valve and what type of engine you have. No will not stand it. You can contact locktite at 1001 Trout Brook Crossing RockyHill,CT06067-3910 Telephone: (860) 571-5100 FAX: (860) 571-5465

Product description

832HT potting and encapsulating compound is designed for high temperature applications and is especially useful when extreme physical strength and chemical resistance are required. It also provides excellent electrical insulation and protects components from static discharges, vibration, abrasion, thermal shock, environmental humidity, salt water and many harsh chemicals. 832HT potting and encapsulating compound is a general purpose, hard, black, two-part epoxy that offers extreme environmental, mechanical and physical protection for printed circuit boards and electronic assemblies. 832HT can be cured at room temperature or higher.

• Suitable for very high temperature applications; service temperature range -40 to 225 °C (-40 to 437 °F)
• Extreme resistance to chemicals. water and humidity (allows for submersion where needed)
• 1.7A:1B volume mix ratio
• Extreme compressive and tensile strength
• Excellent electrical insulating characteristics

User questions & answers

Question:	In the picture there is only part A, does it come with the hardener, part B
Answer:	It is a kit and comes with both parts, some mixing sticks as well as a few mixing cups.
Question:	How viscus is it? Is it thin and pourable or thick and pasty
Answer:	The compound is as thick as honey. Part A is very thick, while part B is pourable.
Question:	Is this resistant to gasoline
Answer:	Yes... It's one the most high temp, chemical resistant potting epoxies that I use... If you need specifics google the company and email/chat with their tech support...
Question:	Does this work with hydrocarbon? c
Answer:	I really wish i could help you with that question but, i no longer have the containers & its been a few years ago when i made the purchase. i used the epoxy a few times on a circuit boards for tankless water heaters that had exposed conductors from water leaks

Product description

J-B Weld Hi-Temp Red Silicone Gasket Maker & Sealant is an RTV (Room Temperature Vulcanized) Silicone gasketing material, designed for use in mechanical assemblies where the existence of higher, continuous temperatures up to 550º F or 650º F intermittent might exist. Upon curing, which occurs when the product is exposed to the moisture in air, the silicone forms a tough, waterproof seal on most surfaces. It will not shrink or crack, resists weathering, is sensor safe and is great for many automotive applications.

• HI TEMP RED SILICONE GASKET MAKER & SEALANT: Is an RTV (Room Temperature Vulcanized) Silicone gasketing material, designed for use in mechanical assemblies where the existence of higher, continuous temperatures up to 550º F or 650º F intermittent might exist
• COUNT ON US: For more than 40 years, our products have earned a loyal following from people who take pride in their work. With each product we innovate, we continue to provide the world's strongest bond for your projects
• EASY TO USE: Curing when the product is exposed to the moisture in air, it forms a tough, waterproof seal on most surfaces. It will not shrink or crack, resists weathering and is sensor safe
• VERSATILE & DEPENDABLE: Ideal for automotive, metal, oil pans, exhaust manifolds, water pumps, timing covers, differential covers, drive housings and oven doors
• DO IT YOURSELF: Big or small, you can DIY it with J-B. Our heavy duty adhesives repair & restore it right the first time. JB Weld delivers the legendary performance of the World's Strongest Bond

User questions & answers

Question:	Can you remove it if needed
Answer:	Believe the instructions are on the back side of the package. You can use acetone or paint thinner to remove.Its great stuff. Works well.
Question:	Can I use it to glue shower mirror to tile in my shower
Answer:	You can but it will probably leach through the mirror coating and appear as mold. Buy mirror mastic.
Question:	Would this be a good product for sealing a crack in a dishwasher liner
Answer:	Yes- I did this, along with filling in a gap on the dishwasher door gasket (which was ultimately replaced). Worked great! Be sure to clean the surface and rough it up a little (a bit of sandpaper, then clean the sandpaper dust off before application of the RTV). Used it a few years ago- is still sealed; all is well.
Question:	My portable convection oven (heats to 500 degrees) glass door fell out of the metal bracket. Would this work to glue it back in
Answer:	Be careful of sealant giving off toxic fumes the first few times you use it. Try heating up the oven 2-3 times before actually placing food inside that could absorb the toxic off-gasses.

Product features

J-B Weld Silicone Sealant & Adhesive

J-B Weld Hi-Temp Red Silicone Gasket Maker & Sealant is an RTV (Room Temperature Vulcanized) Silicone gasketing material designed for use in mechanical assemblies where the existence of higher, continuous temperatures up to 550°F or 650° intermittent might exist. Upon curing, which occurs when the product is exposed to the moisture in the air, the silicone forms a tough, waterproof seal on most surfaces. It will not shrink or crack, resists weathering, is sensor safe, and is great for many automotive applications.

Product description

Pre-mixed, ready-to-use high temperature silicate cement. Designed for patching or repairing cracked or chipped firebrick and mortar. Multi-purpose cement for bonding and sealing both masonry and metals with working temperatures up to 2,000-Degree F. Effective in re-setting and cementing furnaces, stoves, chimney collars, boilers and duct work. Gray in color.

From the Manufacturer

Pre-mixed, ready-to-use high temperature silicate cement. Designed for patching or repairing cracked or chipped firebrick and mortar. Multi-purpose cement for bonding and sealing both masonry and metals with working temperatures up to 2,000-Degree F. Effective in re-setting and cementing furnaces, stoves, chimney collars, boilers and duct work. Gray in color.

• Pre-mixed, ready-to-use, high-temperature cement/mortar
• Designed for patching or repairing cracked or chipped firebrick and mortar
• Withstands working temperatures up to 2,000-Degrees F
• Gray in color
• Made in the USA

User questions & answers

Question:	If im using on my liner and insert stove, how long before i can have a fire
Answer:	Depends on how much movement (and expansion/contraction) your afraid will disturb your final product. - I'd give it at least 12hrs if not 24hrs.. to at least get it mostly dried, adhered and set.. It's a water soluble sand impregnated caulk.. (Hence, it won't go up in flames off-gassing) It will only dry out more with heat..
Question:	would this work to fix a crack in a panel of the refractory in my fireplace
Answer:	Yes this worked great for our fireplace panels. We had multiple cracks and applied this product with a caulking gun and then used a putty knife to smooth it out and pushed it into the cracks. It says on it that it IS NOT to be used on cracks larger than 1/4 ". It is rated for 2000 degree heat. Liked the price and 2 day shipping.
Question:	Can this be used to repair hairline cracks in a Kamodo ceramic firebix
Answer:	It’s all purpose fire place mortar so unless manufacture prohibits I would say yes
Question:	is this product water clean-up
Answer:	Yes it is.

Product description

J-B Weld 37901 2 Pack 3 oz. Extreme Heat Temperature Resistant Metallic Paste

User questions & answers

Question:	an i roll this material between my fingers and form asoft ball
Answer:	Delivered by Amazon, you don't have to worry about security and timeliness.
Question:	Is this product food safe
Answer:	No
Question:	What is the color of the paste product
Answer:	This Metal Projector Screen is also suitable for on regular (non-3d) projector, you can use this screen. But if your projector doesn't support 3D, you can't see 3d image on this Metal Projector Screen, you just see Ordinary image I hope I can help you
Question:	Will this bond fired clay
Answer:	We have the size from 100 to 300 size, such as 100 120 150 180 200 300 inch. It shipped by folded.

Product description

Permatex Muffler and Tailpipe Sealer seals holes and leaks in mufflers, tailpipes and around joints. This sealer makes new installations more secure and resists temperatures to 2000 degrees Fahrenheit. Permatex offers a range of products to repair cracks, leaks and holes on mufflers, tailpipes, catalytic converters and joints

• Seals holes and leaks in mufflers, tailpipes and around joints
• Makes new installations more secure
• Waterproof, non-shrinking paste formula; shock resistant
• Temperature Range: up to 2000°F (1000°C)
• Suggested Applications: Mufflers, tailpipes, joints, and catalytic converters; exhaust system must be cool before applying

User questions & answers

Question:	Can this be removed when you need to drop exhaust for transmission repairs? Or is it like a weld where uou have to make a cut
Answer:	Think of this as pipe thread compound.It is hard when it sets up.It should crack and break apart . The residue should be able to be sanded off if any is left.
Question:	can i use this as gasket dressing to insure a tight seal, or is it to thick like a putty instead of a gasket maker/sealant
Answer:	Yes!!! It'll seal up great. It's not like putty it's pretty thin when it comes out probably about like rtv but not sticky like that just the same consistency then dries like drywall mud does
Question:	How long did the seal hold up? A few months? A year? Thanks
Answer:	Went over a year, probably at 16 months or so and it's still good! I used it in my pipe joints before clamping
Question:	How many (average sized) seals can you get out of one 3oz tube? How many tubes I need if my exhaust has 6+ single exhaust pipe connections
Answer:	I got about 6 exhaust joints out of one tube.

Product features

Permatex Muffler and Tailpipe Sealer

Permatex Muffler and Tailpipe Sealer seals holes and repairs leaks in mufflers, tailpipes, catalytic converters and around joints.

This sealer makes new installations more secure, is shock resistant, high temperature resistant, and is waterproof for all weather conditions.

Directions for Use:

Product description

Permatex High Temp Epoxy is an industrial strength, titanium-reinforced epoxy that cures to a hard, metal-like repair. This non-shrinking formula bonds and repairs materials exposed to high temperatures up to 500 degrees Fahrenheit.

• Industrial strength, titanium-reinforced epoxy
• Bonds and repairs materials exposed to high temperatures up to 500F
• Cures to a hard, metal-like repair
• Non-shrinking formula

User questions & answers

Question:	will this bond metal to plastic
Answer:	Yes
Question:	will this bond stainless steel pot lid handle
Answer:	Yes
Question:	Can this be used in an oven
Answer:	Yes. Max advertised temp is 500 degrees Fahrenheit.
Question:	Will this bond to molded plastic
Answer:	Works on automotive radiators with plastic tanks.

Product description

This Kit includes the popular MixPac DMA50 Dispenser, which will work excellently with this 2:1 cartridge. Araldite 2014 is a Beige-Grey colored two component, room temperature curing, thixotropic Epoxy adhesive (Thick Gel that will also fill crevices). It is high-strength and very tough, with excellent environmental and chemical resistance. It is It performs well bonding to metals, electronic components, plastics, and where higher operating temperature or aggressive environmental conditions apply. It produces very little ‘out gassing’ when curing, and is suitable for specialized electronics, telecommunications, and aerospace applications. Work Time: 60 minutes Handling Strength: 3 hours Shear Strength: up to 3,150 PSI Resists temperatures up to 275F Low-to-no Shrinkage Color: Grey Dries: Grey Viscosity: Gel/Paste (thixotropic, so also fills voids and crevices) Shelf Life: 3 Years (36 Months) Please Note: This is a kit that includes on cartridge, one syringe, and one MixPac DMA50 Dispenser, the industry-standard for efficient adhesive dispensing.

• This Kit includes the popular MixPac DMA50 Dispenser, which will work excellently with this cartridge
• High Resistance to High Temperature, Chemicals, and Water; High Shear and Peel Strength
• 60 Min Working Time - Perfect for Craftsmen, DIY, and Industrial uses
• Thixotropic Grey Epoxy Gel (Thick non-dripping gel that also fill cracks & crevices) Thick Viscosity for Vertical Applications
• This is a Regulated Dangerouse Goods Item, Air/Expedited Shipments include DG Shipment Fee

User questions & answers

Question:	can i use this at (loudspeaker) magnet voice coil winding? haw do you think? is it the best
Answer:	It's material thicker and made of high quality fabrics.
Question:	will included gun work for 1:1 as well as 2:1 mixes? thanks
Answer:	Make a wooden frame. Cost $20.00 Attach the hooks to the frame. Since this is permanent I put wood screws through the plastic hooks to keep them in place. Than hang it on the wall like you would a picture. It weighs about 10lbs 120 inch screen with DIY frame. You can spend Hundreds of dollars on a fixed frame screen that is really heavy and can be difficult to put together. The DIY fixed frame can look professional and the screen is the same one that is in the expensive fixed frame screens.

Product description

J-B KwikWeld is a fast setting version of The Original J-B Weld two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. J-B KwikWeld has a 1:1 mixing ratio, sets in 6 minutes and is fully cured in 4-6 hours. J-B KwikWeld cures to a dark grey color, is rated at a tensile strength of 2424 PSI and will withstand temperatures up to 300ºF.

• J-B Weld KwikWeld: A fast setting version of The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to multiple surfaces. Perfect for DIY household, automotive, marine, craft repair and much more
• Cure and Set Time: After mixing the tubes at a 1: 1 ratio, it takes 6 minutes to set and 4-6 hours to cure. Once cured, KwikWeld can be tapped, filled, sanded, molded and drilled. KwikWeld’s set and cure color is dark grey
• Versatile and Dependable: J-B Weld KwikWeld is steel reinforced, has a tensile strength of 3127 PSI and can withstand temperatures up to 230 degrees Fahrenheit (110 degrees Celsius). When fully cured, KwikWeld is waterproof and resistant to petroleum, chemical and acid
• Surface Applications: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass
• Do it Yourself: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond

User questions & answers

Question:	Weird question i know but would i be able to glue my led light strip to the carpet part of my vehicle with this
Answer:	Yes but it doesn't set quickly like super glue. You'll need to hold the led in place for at least 6 minutes and then let the glue dry completely. I used the glue to reattach a rearview mirror support slug to a windshield. I held the slug in place for 6 minutes and then let it dry overnight before I attached the rearview mirror to it. The instructions on the package will explain this. Also, be aware that you will NEVER be able to remove the led without ripping out the carpet.
Question:	Would this work to fill a small hole in a slab of granite
Answer:	Yes but it won't be pretty
Question:	We put in peel and stick flooring, and there are a few gaps between boards. Would this work to fill in the gaps
Answer:	Can it? Sure. Is it practical to use it in this manner? Probably not. It is messy, but if you tape the areas where you do not want the epoxy and pull the tape up before it sets, you'll be fine. You can also clean it up with acetone as long as you get to it before it sets. I also wouldn't recommend 5/6 minute epoxy, either. If you are filling a long gap, you'll need the extra time for clean up.
Question:	can it hold metal to plastic
Answer:	yes it can

Product features

Original Twin Tube Epoxy

KwikWeld is a fast setting version of The Original J-B Weld two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. KwikWeld has a 1:1 mixing ratio, sets in 6 minutes and is fully cured in 4-6 hours.

Additional Attributes

• Can withstand 230°F/110°C
• When fully cured KwikWeld is waterproof, petroleum, chemical, and acid resistant!
• Surface Applications: Metal, Plastic, PVC, Concrete, Ceramic & Tile and Fiberglass
• Use on: Household, Automotive, Marine, Plumbing, Crafts, Outdoor Equipment, Agricultural Equipment, Motorcycle, Toys, Boats, Personal Watercraft, In/Outboard Engines and Deck & Hull Accessories.