14 best epoxy glues

Product description

Easy-to-use self-mixing dispenser and precision applicator. High-strength formula bonds wood, metal, tile, ceramic, glass, plastic and more. Final bond is high strength and weather-, water- and solvent-resistant. Sand able and paintable.

From the Manufacturer

For over 50 years, Loctite has provided customers with advanced adhesive and sealing solutions. Loctite Epoxy 5 Minute Instant Mix is a two-part adhesive consisting of an epoxy resin and a hardener. When mixed in equal volumes, the resin and hardener react to produce a tough, rigid, high strength bond, which starts to set in 5 minutes and reaches handling strength in 1 hour. The static mix nozzle delivers a uniform mixture of resin and hardener every time. It can be used as an adhesive for a wide range of materials or as versatile filler for gap bonding, surface repairs and laminating. Loctite Epoxy 5 Minute Instant Mix does not shrink and is resistant to water and most common solvents. It can be tinted with earth pigments, cement or sand for color matching and can be sanded and drilled. Our uncompromising level of quality and innovation is achieved through a strong commitment to research and development. This commitment to innovation, quality and reliability has truly earned Loctite the reputation of delivering "Trusted Performance. Proven Results".

• Easy-to-use self-mixing dispenser and precision applicator
• High-strength formula bonds wood, metal, tile, ceramic, glass, plastic and more
• Waterproof, sand able and paintable
• It can be used as an adhesive for a wide range of materials or as a versatile filler for gap bonding, surface repairs and laminating.
• Loctite Epoxy Instant Mix 5 Minute does not shrink and is resistant to water and most common solvents.
• The static mix nozzle delivers a uniform mixture of resin and hardener every time.
• It can be tinted with earth pigments, cement or sand for color matching and can be sanded and drilled.
• Recommended for bonding metal, glass, ceramic, wood, many rigid plastics, china, tile, fiberglass, concrete and stone.

User questions & answers

Question:	Can this be used to repair scratches in quartz countertops
Answer:	I wouldn't use it to repair quartz since it is a porous solid when it cures.
Question:	does the Marine Epoxy come in another color other than white. And are any of your other products suited for constant outdoor use
Answer:	Thank you for your question about Loctite Epoxy Five Minute Instant Mix. This product is not the Marine variation, however that is currently only available in white through us. For any other questions about product specifications feel free to reach us at 800-453-0349. Thanks and have a great day!
Question:	Can this be used multiple times or only once before it dries out or otherwise becomes unusable
Answer:	Two times with the supplied nozels. You can use it more than two times but must mix epoxy by hand and apply with tooth pick or other device
Question:	where can i get extra mixing tips
Answer:	I’ve had good success just squirting it onto some cardboard, mixing with a popsicle stick, then applying to surface.

Product features

5 Minute Instant Mix Epoxy

Product description

QUIK-CURE 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. QUIK-CURE shouldn’t be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. QUIK-CURE is our only epoxy on which you can apply polyester resins. It can be mixed with micro balloons to form a quick setting putty. Items bonded with QUIK-CURE can be handled after 15 minutes. Full strength is reached in 1 hour. Directions in 5 different languages.

• Made in the USA
• Five minute working time
• Handle parts in ten minutes
• Proud Sponsors of Wounded Warrior Project

User questions & answers

Question:	will it bond metal to plastic
Answer:	Yes. If plastic is not polyethelyne or contains a combination of it. Roughen metal surfaces if possible. Might drill holes in materials and allow epoxy to flow through it and it becomes, in effect, a plastic rivet.
Question:	What is the minimum service temperature of this epoxy (once it has already been set
Answer:	I would not subject it freezing temps for extended periods of time. I have a custom knife I made using this epoxy for the handles and I carry it every day all year. I have had zero issues in any weather conditions
Question:	Does it dry clear
Answer:	If you mean color then yes. If you mean can you see through it when it dries then it depends on how much air you introduce into it when you mix the two parts around. I suppose if you mix if very slowly, then no bubbles would be introduced and then it would be clear.
Question:	Does this epoxy dry clear
Answer:	Yes it will dry clear. I think if you stir rapidly you can create more bubbles which may cause the epoxy to look less clear. I like it much better than the joined tubes.

Product features

5 Minute Two Part Epoxy Adhesive

5 minute epoxy cures to a slightly flexible consistency, allowing it to form a lasting bond in areas subjected to high vibration. Items bonded with Quik-Cure can be handled after 15 minutes and full strength is reached after just one hour. Package contains two plastic bottles.

Product description

Gorilla takes epoxy to a new level—the Gorilla tough level. With its superior solvent and water resistance, Gorilla epoxy adhesive is incredibly strong and durable for household and automotive repairs alike. The easy-to-use syringe keeps the epoxy resin and hardener separate, so it is easy to dispense and won’t harden over time. The two-part, gap-filling formula easily bonds steel, aluminum, glass, wood, ceramic, tile and most plastics. Plus, it Dries in an ideal, crystal-clear finish that makes projects look spotless. Directions: 1. Prepare your work area and the surface: It is recommended to use Gorilla epoxy In a well-ventilated area. Prepare the surface: to improve adhesion, roughen smooth surfaces before gluing. Then clean and dry all surfaces to be bonded. 2. Mixing Gorilla epoxy: remove the black cap. With tip pointing upward, cut or snap the end from tip of the syringes. With the tip still pointing upward, eliminate air and ensure even dispensing by slowly pushing the plunger until both the resin and the hardener are at the tip. Push the plunger to dispense even amounts of resin and hardener onto a clean, disposable, contained surface. Mix the two parts for about 20 seconds, until the mixture is uniform. 3. Application: after mixing is complete, apply Gorilla epoxy within 5 minutes. The epoxy mixture will continue to thicken and the bond strength will decrease the longer you wait to apply. 4. Clamping: to reach maximum bond strength, clamp project together and leave undisturbed. Important cure times: set: 5 minutes to apply and position handling: allow to cure for 30 minutes undisturbed (no weight or handling) final cure: allow 24 hours for load-bearing weight storage: to close, pull plunger slightly back. Wipe tip clean with dry cloth and align notch on tip and cap. Close tightly. Click on the Gorilla link at the top of this page to see more fine products from the Gorilla glue company.

• Strong, permanent, fast and gap-filling; great for multiple surface applications
• Best for tough repairs requiring a durable bond, gap-filling and solvent resistance
• Dries clear; ideal for clean, easy finishing
• 6 minute set; plenty of repositioning time for the perfect fit
• Easy-to-use syringe; separate barrels of resin and hardener keep epoxy from hardening, plus syringe dispenses evenly and includes a cap for multiple uses

User questions & answers

Question:	Will Gorilla glue work on hanging something on ceramic tile
Answer:	I have zero doubt that it will work. I would prep the surface of the tile with sandpaper or steel wool at the least.
Question:	Will this work to fix an axe head
Answer:	I used this to fix a maul head to the handle. It was slipping thru extended use and looked like it would come off soon. First sanded and cleaned the fiberglass handle with acetone to created a rough and clean surface. Then wiped the inside of the mall head with acetone. Mixed up a big batch since I didn't want to fall short of product once I started filling. Applied it liberally to the handle then slipped the head on and used the rest to fill in around any crevice left around the head until it was one pool of epoxy flush with the head top. Let it sit for a day then used. Been over a year and it has not had any sign of slipping and looks the same as when I first glued it on.
Question:	I need a clear epoxy to cover and protect a circuit i made in a small box mod i made. its for a small 4- 6 volt device. is this ok
Answer:	Probably YES is your answer with NO guarantees, since I have never used an epoxy to cover ANY type of circuits. I HAVE HOWEVER, used a SILICONE SEALANT (marine grade) also available through AMAZON, to cover AND seal electrical circuits on several watercraft I have owned over the years. ALL with great success. The beauty of the silicone is that it dries clear and can easily be removed while the epoxy dries to an amber hue and is almost impossible to remove. Once it dries, it's there forever. MY suggestion is use a marine grade (waterproof) silicone sealant. GOOD LUCK!
Question:	I'm thinking of using this on ceramic cookware. Is it heat resistant up to 500 degrees F
Answer:	MamaO - researched question - Do NOT use Gorilla epoxy on food ceramics. For other ceramics other than food, should be ok up to 180. From 200-500, epoxy will de-compose. / Look for food safe stuff only, but best to not repair your ceramic for food use. What you want is hard to find !

Product description

PC Products PC-Clear Epoxy Adhesive Liquid . PC-Clear is a completely clear liquid epoxy. PC-Clear is formulated to remain clear during and after its curing time. PC-Clear is very durable and flexible making it unlike many liquid epoxies. If disguising a repair or the absence of color is needed, PC-Clear is your product of choice. PC-Clear demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. Note: PC-Clear will not bond to wax paper, Teflon, Polyethylene, and some other plastics. There are hundreds of plastics in thousands of combinations. Test a small area when in doubt.

From the Manufacturer

PC-Products, celebrating 60 years of “Fixing Your Things”, with quality, reliable repair products. Repair solutions for just about anything that needs repair or what you can manage to break. From Concrete to Wood restoration and heavy duty permanent repairs, we have you covered.Yeah; We can fix that!

• Clear epoxy adhesive liquid bonds wood, metal, glass, ceramic, concrete, and fabric
• When mixed it turns opaque initially then clear to full cure to blend in with bonded material
• Continuous service temperature range from -20 to +200 degrees F
• Provides work time of approximately 4 minutes, cure time for function of 1 hour, and full cure time of 24 hours
• Forms tough bond for durability

User questions & answers

Question:	Is it FDA approved
Answer:	It does not have an FDA approval. But I wont be eating this it does bond well on plastics and is solid, washable and clear. Held the item I used it on very well.
Question:	Does this glue settle to a smooth, shiny finish
Answer:	Smooth, shiny, tacky, &tough.
Question:	Will it repair broken Indian pottery
Answer:	This worked very well to repair some handmade ceramic pottery of mine. I can hardly see where the crack was.
Question:	can this be used to glue a sheet of stainless steel to wood? thanks
Answer:	As the product details say, "used to bond WOOD, METAL, glass, ceramic, concrete, and fabric."

Product features

PC Products PC-Clear Epoxy Adhesive Liquid

PC-Clear is a completely clear liquid epoxy. PC-Clear is formulated to remain clear during and after its curing time. PC-Clear is very durable and flexible making it unlike many liquid epoxies. If disguising a repair or the absence of color is needed, PC-Clear is your product of choice. PC-Clear demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. Note: PC-Clear will not bond to wax paper, Teflon, Polyethylene, and some other plastics. There are hundreds of plastics in thousands of combinations. Test a small area when in doubt.

Great for high detail fixes

PC Clear is excellent for repairs and projects that must be less visible such as art objects or collectibles.

Strong flexible and resilliant bond

Durable and flexible yet demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water.

Proudly made in the USA

All PC Products are made in the USA and shipped from Allentown, PA.

About PC Products

Protective Coating Company was founded and incorporated in 1954 by John (Jack) Long as a service company providing customers with a waterproofing product called 'Spraycrete'. Soon afterward, our signature product PC-7 paste epoxy was developed. This product put Protective Coating Co. on the map. Today, we make a full line of repair and wood restoration products. From wood repairs to concrete repairs and most repairs in between...We have you covered.

Now in its 3rd generation, Protective Coating Co. still maintains their small town philosophy and remains a family run company committed to manufacturing quality products. Every batch of mixed material is still hand tested to insure our high standard of quality. In each of our products you will find more than just a product that performs as intended, you will find a team that stands behind their products. From Concrete to Wood restoration and heavy duty permanent repairs, we have you covered.Yeah; We can fix that!

Product description

C-POXY 30 by CECCORP is a fast/mid setting 30 min general purpose structural-unfilled epoxy adhesive. It's water-proof, heat-resistance, non-yellowing, mixable with fillers (micro balloon, wood flour, organic fillers, bubble glass, and more), pigments, dyes to reinforce or create different viscosities including putty like viscosity. Great for forming and strengthening fillets or joints. Recommended for bonding metal, ceramics, stone, glass, concrete, wood, fiberglass and many plastics such as polyester, ABS and rigid PVC (not suitable for PTFE-PP-PE and rubbers).

• Direction of use: Part A and B need to be mixed thoroughly in the correct volume ratio for minimum 1 minute before use. Gel time of the mixed product is 20-40 minutes at room temperature. Parts requiring bonding should be assembled and kept close without any stress. Assembling is continued until full curing takes place. Excess of the product can be cleaned with Acetone or any solvent-based cleaner compatible with the substrates to bond.
• Works better than other epoxies for bonding brass, bronze, and glass.
• Perfect for countertop repairs and musical instrument manufacturing and repairs.
• Do not mix a large batch. Mixing a large batch can create heat (exothermic reaction) and reduce cure time.
• Shelf life: Minimum two years in unopened packaging at +5°C / +27°C.

User questions & answers

Question:	Is this product UV resistant? Any concerns using it to repair a surfboard
Answer:	Hi, There is no concern using this glue to repair a surfboard. Regarding UV resistant, UV may change the color of the glue to yellow but that is the only change and the glue still works properly. Regards, CECCORP
Question:	I would like to glue 2 marble shower rod holders to my marble shower wall. Will this have enough verticle hold
Answer:	Hello Dear, It will have enough vertical hold. Please make sure to properly clean both surfaces and leave it for 24 hours before applying any load to it. I hope this helps. Regards, CECCORP
Question:	I need to glue metal to pvc , will it be strong and last with this combo
Answer:	Only if you roughen up the PVC and metal surface. Wire brush or grinder. Epoxy is good at filling gaps. CA glue doesn't fill gaps but is strong and fast setting.
Question:	Will this be suitable for filling knot holes and cracks in wood slabs
Answer:	Works well for that purpose. May use a SMALL amount of stain to match if you wish. For rotten or structurally unstable wood, Smiths penetrating Epoxy works better.

Product description

PlasticBonder is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete & more. PlasticBonder has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, PlasticBonder sets black in color and cures to a hard, permanent bond.

• J-B WELD PLASTICBONDER (Black): A quick setting and multipurpose two part urethane adhesive & gap filling system that provides a strong and lasting bond to many plastic surfaces J-B Weld PlasticBonder is great for DIY plastic repairs, filling dents, bumper repairs and more J-B Weld PlasticBonder now comes in a syringe allowing for an easy 1: 1 mix ratio The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses
• CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, PlasticBonder takes 15 minutes to set and 30 hours to cure J-B Weld PlasticBonder set and cure color is black
• STRENGTH: J-B Weld PlasticBonder has tensile strength of 3770 PSI
• SURFACE APPLICATIONS: Thermoset & Carbon Fiber Composites, Thermoplastics and Coated Metals, Plastic & PVC, Concrete, Ceramic & Tile, Fiberglass, and Aluminum
• DO IT YOURSELF: Big or small, you can DIY it with J-B Weld Our heavy duty epoxy and adhesives repair & restore it right the first time J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond

User questions & answers

Question:	Will this material self-level
Answer:	This Plastic Bonder Body Panel Adhesive is self-leveling, for a few minutes anyhow after mixing. This stuff dries to a very glossy surface even if disturbed immediately after application, so touchups are sorta possible. It is a two-part urethane and cures to a quite hard, durable, tough, and fairly strong plastic. It is almost more a solidifying liquid plastic than it is a glue, though it does seem to stick to stuff well. I look forward to making some casted plastic parts with this stuff by utilizing silicone molds that I make from 3d printed patterns There are many casting resins out there but sometimes I want small parts and this convenient two-part urethane should be a quick and easy application.
Question:	Would this product work for gluing a plastic speaker cover back onto a rear plastic door panel
Answer:	It depends on the plastic. I have had great success repairing a couple of "automotive" parts. It will either work or it won't. Make sure the surfaces are clean and free of dirt and oil. It helps to "ruff up" the surrounding surfaces with sand paper especially if the plastic surface is smooth and shiny.
Question:	does is repair a very thin crack from the sun on dashboards
Answer:	If you can get the bond inside the crack, i think it would work. I used it to repair a broken stained glass shade and a hanging plastic bug zapper roof. The bond dries hard and holds very well. It is glossy so it may show a little.
Question:	is this product ok for a gas can seam that is bad. or will the gas eat it away
Answer:	I would buy a new gas can or get a bigger insurance policy.

Product features

Quick Setting Adhesive

PlasticBonder is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete & more. PlasticBonder has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, PlasticBonder sets black in color and cures to a hard, permanent bond.

Additional Attributes

All J-B Weld Syringes have a unique dispensing system allowing customers to re-seal the product, which prevents air from curing the epoxy or adhesive, so they can use it multiple times. J-B Weld also provides a mixing tray and stick in the package so you can get to work right away!

Product description

Devcon epoxy adhesive cures and joins materials together by a chemical reaction between the resin and hardener. This reaction results in a high strength bond that is resistant to most chemicals. Use Devcon Epoxy adhesive for household, industrial, crafts or for any job that requires a high-strength, high-quality bond. Works best on metal, wood, concrete, glass, ceramics, china and much more. 2-Ton Epoxy sets in 30 minutes with strength up to 2,500 lbs. per square inch. Dries clear; water resistant.

• Ideal for joining wood, metal, concrete, glass, ceramics, china and more
• Sets in 30 minutes with strength up to 2,500 pounds per square inch
• Includes 2 bottles; 4-1/2 ounce bottles
• Dries clear
• water resistant

User questions & answers

Question:	After opening, what are the components shelf life? Anyway to lengthen their viability
Answer:	Bought some of this same brand/same size "at least" 40 years ago! It was kept (unfortunately) in my garage (NO HEATING OR AC) for most of this time... temps here can range anywhere from a low of 12 degrees. F to 105 degrees during the course of what one could consider a "typical" year. To my EXTREME SURPRISE...This stuff worked great up until LAST YEAR!!! The resin now appears to show some signs of "separation", but even still... if I take time to assure the resin is stirred in the bottle to a consistent appearance before dispensing, it will still harden and secure the items I use it on. It takes longer to reach a full cure than in the past, but works for my non-critical needs. I can't comment on whether it has the same total bonding power as when new, but it DOES still bond! I am however now finally buying a NEW set so that I can put projects in service based on the product's original "full bonding time frame" (mine takes longer now), and for items that are either too difficult access at will (for a potential re-do") or too critical in function to take chances with bonding failure. GREAT PRODUCT provided they haven't monkeyed with the formula since I bought mine! Even drinking water has a "shelf-life", so I'm totally amazed this stuff has performed so well during the 40 years or so I've had it!!!
Question:	Will it melt blue styrofoam
Answer:	oh yes as fast as it hits it, jim
Question:	Two questions: Is the mix pourable, and what is the maximum temperature that the cured resin can tolerate
Answer:	After mixing, the mixture is viscous but can still be poured (immediately). Maximum temperature before release of toxic fumes is
Question:	I'm really looking for something equivalent to super glue but in this size bottles. Question is do need to use and mix both bottles for it to glue
Answer:	need to use equal parts of each tube, mix well. drying time will be stated on tubes, depending on type you buy...30 sec. to 30 min. or more. usually acetone clean-up before dried, acetone soak will also release bond, as will heat over 325 degrees.whatever quantity needed will still be a 1-1 mix, but keep in mind working time vs dry time, so not to mix more than you can use before hardening. denatured alcohol can thin mixture

Product description

Gorilla takes epoxy to a new level—the Gorilla Tough level. With its superior solvent and water resistance, Gorilla Epoxy adhesive is incredibly strong and durable for household and automotive repairs alike. The easy-to-use syringe keeps the epoxy resin and hardener separate, so it is easy to dispense and won’t harden over time. The two-part, gap-filling formula easily bonds steel, aluminum, glass, wood, ceramic, tile and most plastics. Plus, it dries in an ideal, crystal-clear finish that makes projects look spotless. Directions: 1. Prepare Your Work Area and the Surface: It is recommended to use Gorilla Epoxy in a well-ventilated area. Prepare the surface: To improve adhesion, roughen smooth surfaces before gluing. Then clean and dry all surfaces to be bonded. 2. Mixing Gorilla Epoxy: Remove the black cap. With tip pointing upward, cut or snap the end from tip of the syringes. With the tip still pointing upward, eliminate air and ensure even dispensing by slowly pushing the plunger until both the resin and the hardener are at the tip. Push the plunger to dispense even amounts of resin and hardener onto a clean, disposable, contained surface. Mix the two parts for about 20 seconds, until the mixture is uniform. 3. Application: After mixing is complete, apply Gorilla Epoxy within 5 minutes. The epoxy mixture will continue to thicken and the bond strength will decrease the longer you wait to apply. 4. Clamping: To reach maximum bond strength, clamp project together and leave undisturbed. Important Cure Times: Set: 5 minutes to apply and position Handling: Allow to cure for 30 minutes undisturbed (no weight or handling) Final Cure: Allow 24 hours for load-bearing weight Storage: To close, pull plunger slightly back. Wipe tip clean with dry cloth and align notch on tip and cap. Close tightly.

• Strong, permanent, fast and gap-filling; Great for multiple surface applications
• Best for tough repairs requiring a durable bond, gap-filling and solvent resistance
• Dries Clear; Ideal for clean, easy finishing
• 8 Minute Set; Plenty of repositioning time for the perfect fit
• Easy-to-Use Syringe; Separate barrels of resin and hardener keep epoxy from hardening, plus syringe dispenses evenly and includes a cap for multiple uses

User questions & answers

Question:	Can I use this product on acrylic plastic, like Corian
Answer:	Hello, Gorilla Epoxy will work on Corian. We recommend roughening the surface to provide some texture for the glue to adhere to. If we can be of further assistance, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact and reference case #251233. Thank you, The Gorilla Glue Company
Question:	Can i use the glue on coffee pot
Answer:	Folks might need a little more information. Metal coffee pot? glass pot? plastic handle? what do you want to do with it?

Product features

Gorilla Clear Epoxy

Gorilla takes epoxy to the Gorilla Tough level. With its superior solvent and water resistance, Gorilla Epoxy adhesive is incredibly strong and durable for household and automotive repairs alike. The easy-to-use syringe keeps the epoxy resin and hardener separate, so it is easy to dispense. The two-part, gap-filling formula easily bonds steel, aluminum, glass, wood, ceramic, tile and most plastics. Plus, it dries in an ideal, clear finish that makes projects look spotless.

Bond Strength

When using a 2-part epoxy, it is important that both parts, the resin and hardener, be mixed thoroughly to ensure full bond strength.

5 Minute Set Time

Plenty of repositioning time for the perfect fit.

Indoor/Outdoor

Withstands moderate exposure to water.

Product description

Gorilla Epoxy is a high strength, 2 part adhesive capable of holding up to 33,000 PSI. Developed for long lasting repairs, Gorilla takes epoxy to the next level with superior solvent and water resistance. The easy to use syringe keeps the epoxy resin and hardener separate making application a breeze, and maximizing reusability. The two-part, gap-filling formula easily bonds steel, aluminum, glass, wood, ceramic, tile and most plastics, perfect for a variety of home and auto repairs alike. Gorilla Epoxy dries clear making projects looks spotless. Includes three

• Bonds metal, plastics, stone, wood, and more
• Water resistant and dries clear
• 5 minute set time
• Easy to use syringe
• Includes 3 packages of epoxy

User questions & answers

Question:	How long do you have after you mix the two before it sets up? Putting together 2"x12" boards to make tables with wooden dowels...spreading takes time
Answer:	My experience w/ Gorilla 2 part epoxy is you have probably 8 minutes before it get too tacky.Wear gloves and use a spreading stick that is wide enough to cover as much of the surface as needed after you mix. I'd also deploy both chambers completely and mix it all at once.
Question:	Hurry! how do you clean up tools after using gorilla 5 -minute epoxy...i only have 2 minutes left - thanks
Answer:	Immediately wash them with water. I didn't need to use anything exotic for my little project.
Question:	can this be used to fix a cracked toilet seat
Answer:	hmmm...I suppose it depends on where the crack is located and what the material is...plastic or wood? If it us an area that supports weight via "flexing" then I would say "no". If it is an area that is like gluing on a support nub or in a hinge then I would say give it a shot. Toilet seats are cheap...spend double the amount of the glue and get a new perch.
Question:	How do you clean up excess glue
Answer:	Hello Kris,If the Gorilla Epoxy has not cured, you can wipe the excess away from your project with a dry cloth. Once the epoxy has cured, removal would be mechanical means such as scraping, cutting, sanding, etc. For further assistance, please contact our Consumer Affairs department at 800-966-3458 or through our website at http://www.gorillatough.com/contact.Thank you,The Gorilla Glue Company

Product features

Gorilla Clear Epoxy

Gorilla takes epoxy to the Gorilla Tough level. With its superior solvent and water resistance, Gorilla Epoxy adhesive is incredibly strong and durable for household and automotive repairs alike. The easy-to-use syringe keeps the epoxy resin and hardener separate, so it is easy to dispense. The two-part, gap-filling formula easily bonds steel, aluminum, glass, wood, ceramic, tile and most plastics. Plus, it dries in an ideal, clear finish that makes projects look spotless.

Bond Strength

When using a 2-part epoxy, it is important that both parts, the resin and hardener, be mixed thoroughly to ensure full bond strength.

5 Minute Set Time

Plenty of repositioning time for the perfect fit.

Indoor/Outdoor

Withstands moderate exposure to water.

Product description

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B Weld has a tensile strength of 3960 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550ºF when fully cured.

• J-B WELD ORIGINAL PRO SIZE: Professional 5 OZ Tubes of the Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces and creates a bond stronger than steel. Perfect for DIY household, automotive, marine, craft repair and much more.
• CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original set and cure color is dark grey.
• VERSATILE AND DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius. When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid.
• SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass.
• DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.

User questions & answers

Question:	Could this be used to fix a small (1 x 1/4 inch) crack in a dryer drum? Is there danger it will come off on the clothes
Answer:	When I have had questions about JB Weld products I have called JB Weld & they have answered with good information. Your problem is special because of the temperature that the drum attains. Ask JB Weld.
Question:	Is this product electrically conductive
Answer:	It is NOT electrically conductive. JB Weld is classified as an insulator my the manufacturer (see JB Weld FAQs). In fact it's rated to be microwave safe. Metallic conductors should never be used in a microwave oven, but JB Weld is OK for microwave use.
Question:	I have a number of small leaks in an older aluminum boat-- would JB work for a repair on this as a weld/filler for small punctures? thanks
Answer:	This is a general purpose epoxy that worked great for me on cast iron. It does say you can use it for marine purposes, however you might also consider their product made specifically for water:http://www.amazon.com/J-B-Weld-8277-Water/dp/B000BRQ0TW/ref=sr_1_5?ie=UTF8&qid=1392730373&sr=8-5&keywords=jb+weldor look into the Permatex product made specifically for metalshttp://www.amazon.com/Permatex-84109-PermaPoxy-Minute-Multi-Metal/dp/B000ALDXV2/ref=sr_1_1?ie=UTF8&qid=1392730252&sr=8-1&keywords=metal+epoxy
Question:	block crack between cyls 5 & 7 against the head, at the narrowest point between cyls. both cyls are sleeved. will jb hold the temp without breaking do
Answer:	thanks gpower. was looking online at the temp ratings of different epoxy products, actually found one @2100F, but with low tensile strength. I would like to stay away from welding as the crack is five eights long and sleeved at each end. just now pressure testing and the waterjacket has held 30 lbs for 12 hrs. I may also entertain some of the hi-tech block sealers, if it continues to hold pressure. thanks again for your input, and wish me luck putting life back in this old hemi. Dean

Product features

Original Twin Tube Epoxy

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond with tensile strength of 5020 PSI after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color and fully cures in 15-24 hours.

Additional Attributes

• Can withstand 550°F/287°C
• Compatible Surfaces: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile, Fiberglass and more!
• Repairs/Uses: Household, Automotive, Marine, Plumbing, Crafts, Outdoor Equipment, Agriculture Equipment, Motorcycles, Toys, Boats, Watercraft, In/Outboard Engines, Deck & Hull Accessories and more!

Product description

C-Tough is a two-part structural epoxy adhesive. The Toughness and flexibility of C-Tough allows it to be impact and shock resistant while being able to withstand vibration, contraction and expansion. C-Tough has tremendous grip to wood, metals, plastics, glass, masonry and fiberglass. C-Tough has an easy 1:1 mixing ratio and allows for a long working time with a fast cure rate.

• knife making and repair
• Boat and canoe building
• Assembling metal, plastic and wood parts
• Golf club repair
• Flexible and tough structural bonding

User questions & answers

Question:	Can you mix a pigment with it to dry White? Wanting to use it to fill some holes on center console of my boat. Thanks
Answer:	I have never tried that. It turns semi-transparence without adding anything.
Question:	Does it react with alcohol? I want to glue something that will be immersed into alcohol solution
Answer:	C-Tough is alcohol resistance after fully cured(72 hours). Hope this answers your question. Regards, CECCORP
Question:	How long is the working time
Answer:	30-40 minutes depending on room temperature
Question:	How many square feet of area to be bonded together will this 8.5oz kit cover, please
Answer:	Considering 0.5 mm to 1 mm thickness for the bond it can roughly cover around 4 to 2 sqft area. I hope this answers your question.

Product description

No matter what size your aquarium, Instant Ocean sea salts and water care products offer the smartest, easiest way to bring to ocean home. Our scientifically formulated sea salts are used exclusively by many of leading large-scale aquariums and research facilities across the country. Instant Ocean HoldFast is for bonding to glass or other smooth surfaces. Use it to bond live rock, slate, plants and coral. This is an easy to use product that is safe for all fish and invertebrates and can be used in for freshwater or marine aquariums. Simply clean and rough surfaces to be bonded, cut or break off the desired amount of HoldFast, and knead the mass with your fingers until it turns white. Then apply to bonding surface, being careful to fill any cracks and crevices (NOTE: you have about 7 minutes before HoldFast begins to harden.) Smooth or sculpt any excess HoldFast to blend with surfaces. This product dries within 30 minutes and can be sanded, filled or drilled in less than an hour. It dries to a natural white color.

• aquarium EPOXY: Fish-safe bonding agent secures a range of materials underwater.
• SAFE FOR ANIMALS: Non-toxic epoxy is safe for all fish and invertebrates.
• SUPERIOR BONDING: Lets you create caves, cliffs, steps and walls for aquarium animals to enjoy.
• DRIES WHITE: Once dry, epoxy can be sanded, filled or drilled.
• Age Range Description: All Life Stages

User questions & answers

Question:	can i use this to secure to wet/live rocks together underwater somehow
Answer:	You can but it takes way longer to dry and it takes more of it. Don’t press really hard because it will just spread out to thin. If you can take the rocks out then apply it then put it right back in that works to but I know once you start glueing them all to that opt is out the window.
Question:	Does this stuff cause your protein skimmer to overflow
Answer:	It does and I just learned my lesson after using this and seeing the skimmer overflowing. It has been 2 days and I turned the skimmer all the way and still overflowing!
Question:	Will this work to glue coral pieces together to make one piece
Answer:	No sure, will glue rock or plug to rock
Question:	epoxy sticks to glass
Answer:	I don't think so

Product features

Instant Ocean Holdfast Epoxy Stick Bonding Solution

The HoldFast Epoxy Stick has superior bonding ability that allows you to create steps, caves, cliffs, and walls for aquarium animals to enjoy. It bonds all types of materials from rocks, to corals, to slate, and many more. HoldFast Epoxy Stick is non-toxic to fish and invertebrates and is great for use in freshwater or saltwater.

• Non-toxic, superior bonding agent
• Bonds all types of materials, from rocks to corals, slate and more
• Create steps, caves, cliffs and walls for aquarium animals to enjoy
• Won’t harm fish and invertebrates – use in freshwater or saltwater

Product description

SLOW-CURE 30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest strength of our epoxies. It is waterproof and more heat resistant. SLOW-CURE can be used for bonding if you’re willing to wait overnight. Fillers such as micro balloons can be mixed with SLOW-CURE and FINISH-CURE to form a putty-like consistency. Such fillers will usually decrease the working time by about 25%. Bonded objects can be handled after 8 hours and the cured epoxy reaches full strength within 24 hours. Directions in 5 different languages.

• Made in the USA
• 30 minute working time
• Handle parts in 8 hours
• Proud Sponsors of Wounded Warrior Project

User questions & answers

Question:	Can I use this Epoxy for adhering stones for jewelry
Answer:	Yes, but it will tend to not work as well for larger stones glued to flat surfaces. My wife makes glass jewelry and swears by E6000 silicone
Question:	Does this bond metal and wood together
Answer:	Yes it will bond wood and metal together. Works best when either material is scuffed up a bit. Russ-Pen Kit Mall
Question:	Is the consistency runny enough to use for sealing the end grain of exterior wood
Answer:	I haven't tried it for sealing end grain. That said, I would expect it to work. Just watch your cure time; the BSI-205 gets an initial set after some 30 minutes, but may need 12 or more hours to develop a full set. Double-check the instructions for set time.
Question:	Will this bond together rubber and plastic
Answer:	I do not know if it bonds rubber and plastic. I used it to seal knots in wood, filled in defects in wood instead of wood putty. Excellent adhesive for what I used it for. Bob Smith industries was very helpful to me when I called. They have many different adhesives.

Product description

Pratley Quickset Glue is an high strength adhesive which sets quickly and adheres to most rigid materials like ceramics, stone, concrete, glass, fibre glass and metals.



Can be used where a more runny consistency in close matching joint is required.

• Pratley Quickset Glue is an high strength adhesive which sets quickly and adheres to most rigid materials like ceramics, stone, concrete, glass, fibre glass and metals
• Can be used where a more runny consistency in close matching joint is required.
• Very versatile adhesive which every family will find useful in the home.
• Can be used in applications where the adhesive should not be visible e.g. on ornaments.
• Adheres to most rigid materials. Each pack contains 2 x 20ml tubes.

User questions & answers

Question:	Can it with stand heat up to 100deg C
Answer:	It is not recommended for use above 80 degrees C.
Question:	Will this work to glue a porcelain figurine’s head back on?? Like does it work porcelain on porcelain
Answer:	No - it doesn't work
Question:	Will this work on stone resin, poly resin
Answer:	I"m not sure. I used it on a fairly large piece of ceramic and the bond was very strong. I would contact the manufacturer for a sure answer. Sorry I couldn't be more specific. Chris
Question:	Will it adhere to granite
Answer:	Yes it will.