12 best metal glues

Product description

The gorilla super glue gel is an easy-to-use, thicker and more controlled formula great for multiple surfaces and vertical applications. Developed for long-lasting repairs in an instant, the clear glue Dries in 10–45 seconds. This super glue gel is specially formulated to absorb drops, impacts and shocks. Super glue, also referred to as cyanoacrylate glue, or CA glue, works on a variety of materials, including plastic, metal, fabric, stone, ceramic, paper, rubber and more. In addition to its high performance formula, we’ve added an anti-clog cap with a metal pin inside to ensure an airtight seal for maximum reusability. It’s Gorilla tough, every time. Not recommended for use on polyethylene or polypropylene plastic. Service Temperature 65 Degrees Fahrenheit to 220 Degrees Fahrenheit.

• GEL FORMULA: No run control gel formula that is great for use on vertical surfaces
• ANTI CLOG CAP: Helps keep glue from drying out. It's Gorilla tough use after use
• IMPACT TOUGH: Specially formulated for increased impact resistance and strength.
• FAST-SETTING: Dries in 10-45 seconds. No clamping required
• VERSATILE: Bonds plastic, wood, metal, ceramic, rubber, leather, paper and more. Not recommended for use on polyethylene or polypropylene plastic or similar materials

User questions & answers

Question:	Can this be used to repair a car's plastic intake manifold (nylon polymer) ? Is it compatible
Answer:	Hello this is Christopher Stafford of reflections, unfortunately I wouldn’t recommend this item for your particular application. I would recommend Loctite 404. Thanks for your message and interest.
Question:	EPO Foam safe? I have several RC models that are made from EPO and EPP Foam. Would like a quick to repair glue.... Thanks
Answer:	Hello, Gorilla Super Glue Gel is not recommended for use on foam surfaces. If we can be of further assistance, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact and reference case #315176. Thank you, The Gorilla Glue Company
Question:	Will it glue leather to metal
Answer:	Hello, Gorilla Super Glue Gel will work on leather and metal surface. For smooth surfaces, we recommend roughing the surface to provide a texture for the glue to adhere to. For further assistance with your application, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact and reference case #194392. Thank you, The Gorilla Glue Company
Question:	What's the difference between their super glue gel and their super glue
Answer:	Hello Ryan N.,Gorilla Super Glue Gel is a thicker consistency that is perfect for applications on vertical surfaces. Our Gorilla Super Glue and Gorilla Super Glue Gel will have the same holding power. For further assistance with your application, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact.Thank you,The Gorilla Glue Company

Product description

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B Weld has a tensile strength of 3960 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550ºF when fully cured.

• J-B WELD ORIGINAL PRO SIZE: Professional 5 OZ Tubes of the Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces and creates a bond stronger than steel. Perfect for DIY household, automotive, marine, craft repair and much more.
• CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original set and cure color is dark grey.
• VERSATILE AND DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius. When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid.
• SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass.
• DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.

User questions & answers

Question:	Could this be used to fix a small (1 x 1/4 inch) crack in a dryer drum? Is there danger it will come off on the clothes
Answer:	When I have had questions about JB Weld products I have called JB Weld & they have answered with good information. Your problem is special because of the temperature that the drum attains. Ask JB Weld.
Question:	Is this product electrically conductive
Answer:	It is NOT electrically conductive. JB Weld is classified as an insulator my the manufacturer (see JB Weld FAQs). In fact it's rated to be microwave safe. Metallic conductors should never be used in a microwave oven, but JB Weld is OK for microwave use.
Question:	I have a number of small leaks in an older aluminum boat-- would JB work for a repair on this as a weld/filler for small punctures? thanks
Answer:	This is a general purpose epoxy that worked great for me on cast iron. It does say you can use it for marine purposes, however you might also consider their product made specifically for water:http://www.amazon.com/J-B-Weld-8277-Water/dp/B000BRQ0TW/ref=sr_1_5?ie=UTF8&qid=1392730373&sr=8-5&keywords=jb+weldor look into the Permatex product made specifically for metalshttp://www.amazon.com/Permatex-84109-PermaPoxy-Minute-Multi-Metal/dp/B000ALDXV2/ref=sr_1_1?ie=UTF8&qid=1392730252&sr=8-1&keywords=metal+epoxy
Question:	block crack between cyls 5 & 7 against the head, at the narrowest point between cyls. both cyls are sleeved. will jb hold the temp without breaking do
Answer:	thanks gpower. was looking online at the temp ratings of different epoxy products, actually found one @2100F, but with low tensile strength. I would like to stay away from welding as the crack is five eights long and sleeved at each end. just now pressure testing and the waterjacket has held 30 lbs for 12 hrs. I may also entertain some of the hi-tech block sealers, if it continues to hold pressure. thanks again for your input, and wish me luck putting life back in this old hemi. Dean

Product features

Original Twin Tube Epoxy

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond with tensile strength of 5020 PSI after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color and fully cures in 15-24 hours.

Additional Attributes

• Can withstand 550°F/287°C
• Compatible Surfaces: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile, Fiberglass and more!
• Repairs/Uses: Household, Automotive, Marine, Plumbing, Crafts, Outdoor Equipment, Agriculture Equipment, Motorcycles, Toys, Boats, Watercraft, In/Outboard Engines, Deck & Hull Accessories and more!

Product description

I Love To Create-Aleene's Jewelry & Metal Glue. Perfect for jewelry ceramic pieces leather metal rubber gems mirrors wire and more! Strong and permanent. This package contains three .1oz tube of jewelry and metal glue. Conforms to ASTM D 4236. Made in USA.

• I Love To Create-Aleene's Jewelry & Metal Glue
• Perfect for jewelry ceramic pieces leather metal rubber gems mirrors wire and more! Strong and permanent
• Made in United States
• Bonds quickly and gel formula won't run when applied
• Dries clear, strong and permanent
• 0.3 fl oz contains 3 tubes

User questions & answers

Question:	is this epoxy
Answer:	No, this is not epoxy330. Amazon does sell epoxy so check it out.
Question:	how do you remove the thin collar
Answer:	The thin collar is only on the larger tubes. If you have any further inquiries, please contact Aleene's at [email protected] or call 1-800-438-6226.
Question:	How good is this glue for glass
Answer:	Not good, I tried and instead it glued my fingers to the glass and glued my fingers together
Question:	How to remove excess glue from edges
Answer:	If the glue has not dried, you can wipe the excess with a damp cloth or Q-Tip. If the glue has dried, you can use 85% or higher rubbing alcohol or 100% acetone. If you have any further inquiries, please contact iLoveToCreate at [email protected] or call 1-800-438-6226.

Product description

Permatex Steel Weld Epoxy is a versatile, easy-to-use, multi-metal epoxy two-part adhesive and filler system that eliminates the need for welding or brazing. Sets in four minutes, no clamping needed. Dark grey appearance. Fills gaps and will not shrink. When cured, can be drilled, sanded, threaded or filed. Resistant to water and solvents. Temperature range -60°F to 300°F (-51°C to 149°C). Permanent strength up to 4500 PSI. Ideal for use on complex, multi-piece assemblies and for bonding rigid materials, sealing welded seams, filling metal cracks, and mounting metal components.

• Versatile, easy-to-use, multi-metal dark grey epoxy adhesive that eliminates the need for welding or brazing
• Water and solvent resistant epoxy sets in 4 minutes with no clamping needed; permanent strength up to 4500 PSI
• Fills gaps and will not shrink; when cured can be drilled, sanded, threaded or filed
• Temperature Range: -60°F to 300°F (-51°C to 149°C)
• Suggested Applications: Ideal for complex, multi-piece assemblies; bonds rigid materials including aluminum, brass, chrome, copper, iron, stainless steel, and steel; use to seal welded seams, fill metal cracks, and mount metal components

User questions & answers

Question:	Will it work on lawn tractor radiator hole
Answer:	It's worth a try, the stuff is great. I question that there is a water radiator in a lawn tractor, usually they are air cooled.
Question:	Will this work to fix my cars side view mirror because jb weld was an epic fail
Answer:	This is a lot stronger then jb weld. but use a mesh when using it. Makes it better. Ultimately I would say to go on am-autoparts.com You can get the whole thing for under 100 and free shipping.
Question:	What is the color, black, gray, clear, tan
Answer:	dark Grey
Question:	Does this epoxy do well in heat? Specifically exhaust/muffler heat
Answer:	I used to heat to remove the epoxy when it didn't hold as well as I had hoped. I don't think this would work with a muffler.

Product features

Permatex Steel Weld Epoxy

Versatile, easy-to-use, multi-metal epoxy adhesive is two-part adhesive and filler system that eliminates the need for welding or brazing. Sets in four minutes, no clamping needed. Dark grey appearance. Fills gaps and will not shrink. When cured, can be drilled, sanded, threaded or filed. Resistant to water and solvents. Permanent strength up to 4500 PSI. Ideal for complex, multi-piece assemblies and for bonding rigid materials. Use to seal welded seams, fill metal cracks, and mount metal components.

Product description

Aleene's jewelry and metal glue. This .70 ounce tube of glue is an instant adhesive perfect for metals, stones, glass and beads! make your creative ideas stick with this specialized glue. 1 piece per package.

• Aleene's jewelry and metal glue. This .70 ounce tube of glue is an instant adhesive perfect for metals, stones, glass and beads. Make your creative ideas stick with this specialized glue. 1 piece per package.
• Bonds quickly and gel formula won't run when applied
• Dries clear, strong and permanent
• Available in .7oz metal squeeze tube

User questions & answers

Question:	Hypoallergenic for earring posts
Answer:	I think it is cause I have sensitive skin and have had no issues so far
Question:	can you use this glue on plasric thread for bead knots
Answer:	I would think you could.
Question:	would this glue work for a string of real pearls? thank you
Answer:	To harsh. May affect their shine/luster.
Question:	Does this glue have the vapor which affects stone sparkle
Answer:	Depends on the material the 'stones' are composed of.

Product features

Aleene's Jewelry & Metal Instant Adhesive

Jewelry is important … and so is the glue that holds it together!

Jewelry & Metal Glue is your go-to glue when you need an easy solution for creating or repairing jewelry easily, quickly and permanently . It even works on porous and semi-porous stones, gems, metals and other materials so your jewelry stands out like it’s meant to.

This glue works best on:

• Beads
• Metals
• Stones
• Gems
• Mirrors
• Ceramics
• Plastics

Details

• No-drip, no-run formula provides ultra control
• Strong, permanent bond
• Dries clear and fast
• Great for repairs
• Impact resistant
• Waterproof

Product description

Gorilla Super Glue Micro Precise Gel is an easy-to-use, thicker formula combined with a precise, controlled dispensing tool. Designed to fulfill consumers’ desire for an easy-to-use, precise application experience, this NEW Gorilla Super Glue form allows you to apply only the amount of glue that you want, exactly where you need it. This tool was specially designed to fit comfortably into your hand. Click on the Gorilla link at the top of the page to see more great products from The Gorilla Glue Company.

• Gorilla Super Glue Micro Precise Gel is an easy-to-use, thicker formula combined with a precise, controlled dispensing tool.
• No Run Control Precise Gel Formula
• Impact Tough: Reinforced to increase impact resistance and strength
• Smooth Application: Precise, controlled dispensing tool that fits comfortably in hand
• Fast Setting: Dries in 10-45 seconds, no clamping required
• Versatile: Bonds plastic, wood, metal, ceramic, rubber, leather, paper, and more!

User questions & answers

Question:	Will this work on brass to wood
Answer:	In my experience, this glue will join ANYTHING
Question:	for my craft project will it bond together hard plastic and fabric
Answer:	I would say it should. If it keep a thumb nail together, it should glue fabric to hard plastic.
Question:	Is gorilla glue non toxic? Want to put it on a crack in a cup
Answer:	No where can I find that it is non toxic. I would not chance using it on anything that you would eat or drink from
Question:	Can i use this to bond a piece of rope to a piece of resin jewelry
Answer:	It might work, maybe research a bit more on what it works with/for

Product description

Gorilla super glue gel is an easy-to-use, thicker and more controlled formula great for multiple surfaces and vertical applications. Developed for long-lasting repairs in an instant, the clear glue Dries in 10–45 seconds. This super glue gel is specially formulated to absorb drops, impacts and shocks. Super glue, also referred to as cyanoacrylate glue, or CA glue, works on a variety of materials, including plastic, metal, fabric, stone, ceramic, paper, rubber and more. In addition to its high performance formula, we’ve added an anti-clog cap with a metal pin inside to ensure an airtight seal for maximum reusability. It’s Gorilla tough, every time. Not recommended for use on polyethylene or polypropylene plastic. Click on the Gorilla link at the top of the page to see more great products from The Gorilla Glue Company.

• No run control gel formula; Great for use on vertical surfaces
• Anti-clog cap: Keeps glue from drying out, its Gorilla tough use after use
• Impact tough: Unique rubber particles increase impact resistance and strength
• Fast-setting: dries in 10-30 seconds, no clamping required
• Versatile: Bonds plastic, wood, metal, ceramic, rubber, leather, paper and more

User questions & answers

Question:	Can you glue something to the wall
Answer:	Hello, Gorilla Super Glue Gel will work on most surfaces and has a thick consistency, which makes it ideal for vertical applications. So we can be of further assistance, please contact our Consumer Affairs team at 800-966-3458 or through our website, found in our profile, and reference case #379223. Thank you, The Gorilla Glue Company
Question:	Would this bond steel to wood
Answer:	Hello this is Christopher Stafford of Reflections thanks for your message and interest, unfortunately I wouldn’t recommend this particular unit. I would recommend an epoxy resin for a strong bond. Thanks again for your message.
Question:	How does this perform in consistency and performance to Loc-tite gel control
Answer:	I prefer the gel control
Question:	Does this work on glass
Answer:	Hello, We do not recommend using Gorilla Super Glue Gel on glass. Due to alkalinity in glass, the bond will weaken over time. So we can help, please contact our Consumer Affairs team at 800-966-3458 or the website listed on the back of the packaging and reference case #371617. Thank you, The Gorilla Glue Company

Product description

The Only Glue You'll Ever Need! Rhino Glue Gel is a clear commercial grade instant adhesive that will bond everything. Rhino Glue will instantly bond the same or dissimilar surfaces like hard to bond plastics, vinyls, canvas, woods, rubber, ceramics, metals, glass, fabrics and more. No more failed bonds or dry outs with our triple distilled adhesive that works on materials where others fail. Rhino toughened formula for impacts, shock, moisture, heat and vibrations. Rhino Gel is a thicker version of Rhino Glue. Unlike other gel glues no more gummed up bottles. Faster Stronger Tougher. For more info go to our company site at Rhino Glue Dot Com. Rhino Glue is not available in stores.

• Rhino Glue Gel, Heavy Duty 40 Gram Clear
• Bonds in seconds plastics, vinyl, wood, rubber, metals, canvas, acrylics, ceramic, glass and more.
• Clear Stress Tough formula for impacts, shock, moisture, heat and vibrations
• The Faster Stronger Tougher Glue!

User questions & answers

Question:	Would it bond glass to plastic
Answer:	Yes to both.
Question:	How do you open the rhino glue pro kit. i keep twisting it but still it's not open
Answer:	bend the top and twist and pull
Question:	Would this work on thin rubber? Other super glue I used in past actually basically melts thin material
Answer:	I bought it because I was told that I could use it on my Halloween tombstones which are made of styrofoam. Other superglue melts the foam and this does not so I would think that it will probably work on your rubber as well. It is the strongest glue I have come across. when it sets, your item will stay fixed. In fact, I have used it on rubber. the tip of one of my sneakers came off and nothing would hold it back on. Well, Rhino Glue did and that was rubber to leather on a curved area.
Question:	How does this compare to gorilla glue for holding strength
Answer:	I haven't tried gorilla glue so I can't really compare. All I know is I researched the rhino glue and decided to purchase it to fix my convertible top. It worked like a charm. I'm very satisfied.

Product description

J-B KwikWeld is a fast setting version of The Original J-B Weld two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. J-B KwikWeld has a 1:1 mixing ratio, sets in 6 minutes and is fully cured in 4-6 hours. J-B KwikWeld cures to a dark grey color, is rated at a tensile strength of 2424 PSI and will withstand temperatures up to 300ºF.

• J-B Weld KwikWeld: A fast setting version of The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to multiple surfaces. Perfect for DIY household, automotive, marine, craft repair and much more
• Cure and Set Time: After mixing the tubes at a 1: 1 ratio, it takes 6 minutes to set and 4-6 hours to cure. Once cured, KwikWeld can be tapped, filled, sanded, molded and drilled. KwikWeld’s set and cure color is dark grey
• Versatile and Dependable: J-B Weld KwikWeld is steel reinforced, has a tensile strength of 3127 PSI and can withstand temperatures up to 230 degrees Fahrenheit (110 degrees Celsius). When fully cured, KwikWeld is waterproof and resistant to petroleum, chemical and acid
• Surface Applications: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass
• Do it Yourself: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond

User questions & answers

Question:	Weird question i know but would i be able to glue my led light strip to the carpet part of my vehicle with this
Answer:	Yes but it doesn't set quickly like super glue. You'll need to hold the led in place for at least 6 minutes and then let the glue dry completely. I used the glue to reattach a rearview mirror support slug to a windshield. I held the slug in place for 6 minutes and then let it dry overnight before I attached the rearview mirror to it. The instructions on the package will explain this. Also, be aware that you will NEVER be able to remove the led without ripping out the carpet.
Question:	Would this work to fill a small hole in a slab of granite
Answer:	Yes but it won't be pretty
Question:	We put in peel and stick flooring, and there are a few gaps between boards. Would this work to fill in the gaps
Answer:	Can it? Sure. Is it practical to use it in this manner? Probably not. It is messy, but if you tape the areas where you do not want the epoxy and pull the tape up before it sets, you'll be fine. You can also clean it up with acetone as long as you get to it before it sets. I also wouldn't recommend 5/6 minute epoxy, either. If you are filling a long gap, you'll need the extra time for clean up.
Question:	can it hold metal to plastic
Answer:	yes it can

Product features

Original Twin Tube Epoxy

KwikWeld is a fast setting version of The Original J-B Weld two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. KwikWeld has a 1:1 mixing ratio, sets in 6 minutes and is fully cured in 4-6 hours.

Additional Attributes

• Can withstand 230°F/110°C
• When fully cured KwikWeld is waterproof, petroleum, chemical, and acid resistant!
• Surface Applications: Metal, Plastic, PVC, Concrete, Ceramic & Tile and Fiberglass
• Use on: Household, Automotive, Marine, Plumbing, Crafts, Outdoor Equipment, Agricultural Equipment, Motorcycle, Toys, Boats, Personal Watercraft, In/Outboard Engines and Deck & Hull Accessories.

• Easy Bonding - The simple to use instant glue will make your projects so much easier! After cleaning both surfaces, just spread the 2-3 drops of CA glue per square inch on one surface & spray the glue activator spray on the other, wait 10 seconds and then bond the pieces 5-12 seconds together.
• Powerful Professional Adhesive - Our two part CA Glue with activator will help you achieve a clean and professional result no matter what your project is. Great for industrial and personal projects, this super glue will give you the bond you need!
• Quick Cure Time - No time to wait? With our instant bond adhesive, your project will be ready in seconds! Thanks to our special CA Glue Activator, your project will be ready in 5-12 seconds. Without the activator, cure time can take up to 2 minutes.
• Clean Application - The aerosol super glue accelerator provides a fine mist that is easy to control, and thanks to the viscous liquid of the glue your project won’t be a mess. Just a little bit of two part super glue will be plenty!
• Compatible With Multiple Materials - This cyanoacrylate accelerator is suitable for use on a variety of materials from wood to glass & stone to metal. Avoid using the cyanoacrylate glue on nonstick surfaces and polyethylene products.

User questions & answers

Question:	Storage and shelf life of this material
Answer:	I can’t tell you the exact shelf life of this product, However, when you compare the amount of product you get for the price, verses what you pay in the big box stores for basically super glue I’ve found it to be a very good deal. I use mine for making quick jigs for wood working products. I’m happy with this product.
Question:	Will this glue resin to rubber
Answer:	It might resin to rubber, but over time it might not hold.

Product features

Finish Projects

Whether you need to fix broken furniture, repair a vase, fixing carpentry, kitchen & bathroom cabinet installations or finish up your hobby projects, our CA glue can help you get the job done.

Lasting Results

Our super glue and accelerator spray creates a permanent bond between surfaces, ensuring your finished project will stand the test of time. Usable both indoors and outdoor, and in both personal and professional applications, making magnet, souvenir, plastic models, making models, hobby, DIY, carpenters, decorators, cabinets, architects, students this 2 part super glue is necessary in your toolbox.

Bonds In Seconds

No more waiting on your project to dry with our instant glue! When you use the cyanoacrylate glue activator, your project will be cured and ready for use in just 5-12 seconds! Without the activator, the cure time increases to just 2 minutes. Within just seconds you can tick another project off the list!

Precise Application

With the fine spray from the aerosol can of the two part super glue and narrow tip of the glue activator, you can expect a clean and attractive finish from our adhesive. The thick, viscous liquid can even be applied on vertical surfaces. The instant glue stays where you put it and dries clear. A little bit of the instant bond adhesive goes a long way, making it good for your wallet, too!

Bonds Many Surfaces

While our super glue kit is not ideal for use with polyethylene or polypropylene plastics, the list of compatible bonding surfaces is long. Our glue and activator easily bonds with many different surfaces including glass, stone, tiles, brick, wood, MDF, chipboard, ceramic, and more.

Product description

Type: Liquid Glue



Material：Transparent Semi-Fluid



Color：Transparent



Capacity: 25ML



Weight：About 25g



Packing Included: 2 * 25ml B7000 Glues



 ★B-7000 is a special environmental protection and other industries bonding glue crafts, compared with other adhesives, B-7000 pungent odor but also tiny FRESH fragrance;  having a high elastic film soft, anti-vibration and waterproof.



★B-7000 paste adhesive can be used on metals, glass, ceramics, stone, bamboo wood, cloth, leather, PVC, ABS, nylon, sponge, film, textiles, electronic components, plastics, rubber, fiber class,sheet, cell phone stickers border, LCD screen, in the box, and other materials, and has a very good paste properties.



If you have any problem, pls feel free to contact us, thanks！



PS:The glue may leak out because the tube squeezed,please contact our customer service soon,we will send a new replacement for free,We have improved the packing quality,thank you for your understanding and support.

• ★Using a needle design, can be opened after use, won't get gagging..Allows Small Adhesive drops for fine, Precise , Controlled and no mess Applications.
• ★Multi Purpose,Able to permanently bond various materials.Suited for Smart Phone,Jewelry,Electronic Components,Toys, Metal, Glass, Rubber, Fiber, Paper, Ceramics, Wood, Cloth, Textile, Nylon, PVC, Leather and other materials.
• ★Impact resistance: Very high elasticity, can be stretched to its own length of 900% will not break, effectively bonding with the expansion of the material with the surface, improve the durability of the load bearing structure.
• ★Sealing characteristics: sealed and isolated gas, liquid, air flow, in the underwater environment with plastic long-term to maintain excellent bonding strength.
• ★Surface dry time:about 6 minutes.

User questions & answers

Question:	Can I use this to glue glass to wood
Answer:	It could possibly work if you follow the instructions on the tube very carefully, depending on how much stress is placed on the joined area(s).
Question:	Do these have the precision metal tip for better accuracy
Answer:	It has a small tip yes.
Question:	Does this work to apply Rhinestones on acrylic nails
Answer:	Well thats not what i used it for i had bought it to replace a phone screen But i know for sure it didn't work for that that well because after a week or so the screen started to lift
Question:	Will this glue Glass to glass
Answer:	This is a knock off glue and isn’t worth purchasing.
Question:	Does this glue dry flexible
Answer:	No. Our glue with flexible bond is Fabric & Paper Glue.
Question:	What is the viscosity of the glue e.g. water like, thick goo, or something in-between. I need to use it in small crack and want it to flow freely
Answer:	E7502 is watery kind of glue, should run and fill the space for you but if the crack is too small, the air sometimes will stop the glue from dropping in, you may have to use some kind of tool to get it in.
Question:	Would this be safe to glue broken pieces together on a ceramic pan
Answer:	Elmer's ProBond Advanced was designed specifically for bonding porous surfaces, such as wood, concrete and drywall, to non-porous surfaces, such as metal, glass and ceramic. While this glue is AP Certified, we do not recommend using it on areas of items that may come in contact with food or the mouth. We encourage you to be safe and only use products as advised.
Question:	How long does it take to dry
Answer:	I live in Hilo, Hawaii. Rains almost every day, on days with little rain and low humidity, dries to the touch in about 10 - 15 minutes. Days with pouring rain seams to always be dry to the touch in about a half an hour. This goes on grey and dries clear. Total clear takes about 6 - 12 hours. I would like to add this is the best all propose glue I found. Has worked GREAT on everything I have tried it on.

Product description

QUIK-CURE 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. QUIK-CURE shouldn’t be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. QUIK-CURE is our only epoxy on which you can apply polyester resins. It can be mixed with micro balloons to form a quick setting putty. Items bonded with QUIK-CURE can be handled after 15 minutes. Full strength is reached in 1 hour. Directions in 5 different languages.

• Made in the USA
• Five minute working time
• Handle parts in ten minutes
• Proud Sponsors of Wounded Warrior Project

User questions & answers

Question:	will it bond metal to plastic
Answer:	Yes. If plastic is not polyethelyne or contains a combination of it. Roughen metal surfaces if possible. Might drill holes in materials and allow epoxy to flow through it and it becomes, in effect, a plastic rivet.
Question:	What is the minimum service temperature of this epoxy (once it has already been set
Answer:	I would not subject it freezing temps for extended periods of time. I have a custom knife I made using this epoxy for the handles and I carry it every day all year. I have had zero issues in any weather conditions
Question:	Does it dry clear
Answer:	If you mean color then yes. If you mean can you see through it when it dries then it depends on how much air you introduce into it when you mix the two parts around. I suppose if you mix if very slowly, then no bubbles would be introduced and then it would be clear.
Question:	Does this epoxy dry clear
Answer:	Yes it will dry clear. I think if you stir rapidly you can create more bubbles which may cause the epoxy to look less clear. I like it much better than the joined tubes.

Product features

5 Minute Two Part Epoxy Adhesive

5 minute epoxy cures to a slightly flexible consistency, allowing it to form a lasting bond in areas subjected to high vibration. Items bonded with Quik-Cure can be handled after 15 minutes and full strength is reached after just one hour. Package contains two plastic bottles.