13 best strongest plastic glue

Product description

PlasticBonder is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete & more. PlasticBonder has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, PlasticBonder sets black in color and cures to a hard, permanent bond.

• J-B WELD PLASTICBONDER (Black): A quick setting and multipurpose two part urethane adhesive & gap filling system that provides a strong and lasting bond to many plastic surfaces J-B Weld PlasticBonder is great for DIY plastic repairs, filling dents, bumper repairs and more J-B Weld PlasticBonder now comes in a syringe allowing for an easy 1: 1 mix ratio The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses
• CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, PlasticBonder takes 15 minutes to set and 30 hours to cure J-B Weld PlasticBonder set and cure color is black
• STRENGTH: J-B Weld PlasticBonder has tensile strength of 3770 PSI
• SURFACE APPLICATIONS: Thermoset & Carbon Fiber Composites, Thermoplastics and Coated Metals, Plastic & PVC, Concrete, Ceramic & Tile, Fiberglass, and Aluminum
• DO IT YOURSELF: Big or small, you can DIY it with J-B Weld Our heavy duty epoxy and adhesives repair & restore it right the first time J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond

User questions & answers

Question:	Will this material self-level
Answer:	This Plastic Bonder Body Panel Adhesive is self-leveling, for a few minutes anyhow after mixing. This stuff dries to a very glossy surface even if disturbed immediately after application, so touchups are sorta possible. It is a two-part urethane and cures to a quite hard, durable, tough, and fairly strong plastic. It is almost more a solidifying liquid plastic than it is a glue, though it does seem to stick to stuff well. I look forward to making some casted plastic parts with this stuff by utilizing silicone molds that I make from 3d printed patterns There are many casting resins out there but sometimes I want small parts and this convenient two-part urethane should be a quick and easy application.
Question:	Would this product work for gluing a plastic speaker cover back onto a rear plastic door panel
Answer:	It depends on the plastic. I have had great success repairing a couple of "automotive" parts. It will either work or it won't. Make sure the surfaces are clean and free of dirt and oil. It helps to "ruff up" the surrounding surfaces with sand paper especially if the plastic surface is smooth and shiny.
Question:	does is repair a very thin crack from the sun on dashboards
Answer:	If you can get the bond inside the crack, i think it would work. I used it to repair a broken stained glass shade and a hanging plastic bug zapper roof. The bond dries hard and holds very well. It is glossy so it may show a little.
Question:	is this product ok for a gas can seam that is bad. or will the gas eat it away
Answer:	I would buy a new gas can or get a bigger insurance policy.

Product features

Quick Setting Adhesive

PlasticBonder is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete & more. PlasticBonder has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, PlasticBonder sets black in color and cures to a hard, permanent bond.

Additional Attributes

All J-B Weld Syringes have a unique dispensing system allowing customers to re-seal the product, which prevents air from curing the epoxy or adhesive, so they can use it multiple times. J-B Weld also provides a mixing tray and stick in the package so you can get to work right away!

Product description

J-B Weld Plastic Weld Epoxy Putty Plastic Weld is a hand-mixable, fast-setting epoxy putty that forms a durable bond to most major plastic types. After mixing, it forms a polymer compound that can be molded or used to build up and repair just about anything made from plastic. When cured, it can be sawed, drilled, carved, sanded and painted. Plastic Weld has a 20-25 minute work life; functional cure occurs in 2-3 hours. Plastic Weld cures to an off-white color, is rated at a tensile strength of 350 PSI. Does not adhere to polyethylene, polypropylene or some other plastics. Test for adhesion first. Use on: AutomotiveCeramicFiberglassPlastic/Composite/PVCAnd more Instructions 1. Cut: Remove required amount of putty. 2. Mix: Thoroughly knead putty with fingers to a uniform color. 3. Apply: Press putty firmly to the surface to be repaired. J-B Weld is proudly made in the USA

• J-B WELD PLASTICWELD: A hand mixable two part epoxy putty stick that is formulated to repair and rebuild various plastic compounds and surfaces. J-B Weld PlasticWeld is designed for DIY plastic repairs on ABS, PVC & CPVC pipes and plastics, auto bumpers and more! PlasticWeld is certified by the NSF and is safe for contact with potable water.
• CURE AND SET TIME: After kneading the two part formula together by hand, PlasticWeld takes 25 minutes to set and cures in 3 hours. J-B Weld PlasticWeld set and cure color is off white.
• PRODUCT FEATURES AND STRENGTH: J-B Weld PlasticWeld has lap shear strength of 600 PSI. PlasticWeld can withstand continuous temperatures up to 250oF (121oC) and intermittent temperatures up to 300oF (148oC) when fully cured. PlasticWeld does not shrink and can be molded, shaped, sanded, drilled and cut.
• APPLICATIONS: ABS, PVC & CPVC pipes and plastics, auto bumpers and trim, vinyl surfaces and siding, marine repairs & fiberglass parts, plastic water tanks, and plumbing.
• DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.
• Repair and rebuild any rigid and semi-flexible plastic including ABS, PVC and CPVC
• Bonds instantly

User questions & answers

Question:	Will this product repair broken plastic boat windshield inviisibly
Answer:	will this product repair a broken plastic door handle
Question:	Can it be used more than once, or is thrown away after one use
Answer:	Comes with a resealable cap, I opened mine at least two weeks ago and have still been able to use it (also used on multiple projects during those weeks). Just be careful to replace the cap in the same holes you removed it from or you will mix the two components and seal the lid.
Question:	Will it seal a PVC pipe that has a 1 inch slit? Must hold 75lbs of water press. Would put a rubber patch & 2 pipe clamps over it
Answer:	Yes, it is awesome! I've used it for years! It should work great!!
Question:	Is this product good for the broken plastic frame of eyeglasses? The eyeglasses is broken on the temple leg
Answer:	As an optician for over 30 years, sadly, nothing I've found short of a 2 part epoxy/resin will work...but only .temporarily. plus you'll probably get it everywhere including the lenses. I suggest visiting your local optician. I have tons of discontinued frames and can usually hand-edge the lenses if its a close fit . BTW, its the same with so-called scratch removers for eyeglass lenses:snake oil. hope this helps... John shameless plug follows: glassescontacts.com or FB.

Product features

Epoxy Putty

PlasticWeld is a hand-mixable, fast-setting epoxy putty that forms a durable bond to most major plastic types. *After mixing, it forms a polymer compound that can be molded or used to build up and repair just about anything made from plastic. When cured, it can be sawed, drilled, carved, sanded and painted. PlasticWeld has a 20-25 minute work life; functional cure occurs in 2-3 hours. PlasticWeld cures to an off-white color, is rated at a lap shear strength of 600 PSI. Does not adhere to polyethylene, polypropylene, or some other plastics.

Additional Attributes

• PlasticWeld NSF Certified - Safe for contact with potable water.
• PlasticWeld can resist continuous temperatures of 250°F (121°C) and intermittent temperatures of 300°F (149°C).

Product description

Plastic Bonder is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete & more. Plastic Bonder has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, Plastic Bonder sets to a tan color and cures to a hard, permanent bond.

• J-B WELD PLASTICBONDER (Tan): A quick setting and multipurpose two part urethane adhesive & gap filling system that provides a strong and lasting bond to many plastic surfaces. J-B Weld PlasticBonder is great for DIY plastic repairs, filling dents, bumper repairs and more! J-B Weld PlasticBonder now comes in a syringe allowing for an easy 1:1 mix ratio. The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses!
• CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, PlasticBonder takes 15 minutes to set and 30 hours to cure. J-B Weld PlasticBonder set and cure color is tan
• STRENGTH: J-B Weld PlasticBonder has tensile strength of 3770 PSI.
• SURFACE APPLICATIONS: Thermoset & Carbon Fiber Composites, Thermoplastics and Coated Metals, Plastic & PVC, Concrete, Ceramic & Tile, Fiberglass, and Aluminum.
• DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.

User questions & answers

Question:	Work on battery
Answer:	Might work on the plastic case - but I would not use in contact with battery acid
Question:	Can this be used to fix a small crack in a dashboard
Answer:	Yes! I used it to repair the vacuum
Question:	Will this work on hdpe
Answer:	I used this on a PVC job and it worked well for that, but I mixed it on a plastic lid that was HDPE (#2 recyclable) before applying it. There was some left on the lid, and after it dried, it pealed right off the lid, so I'm not too sure about using this on HDPE.
Question:	I want to bond glass to polypropylene. Does this work? If not any good epoxy that works for this
Answer:	I did not know if the plastic bonder would stick to glass, so I tried it on some empty glass jars and old prescription pill bottles which were made of Polypropylene, (type 5 plastic). I cleaned and sanded both the plastic bottles and the glass jars. I applied the JB Weld Plastic Bonder to one sample and also tried PC-11 Marine Power Epoxy Paste on another, (the jars and bottles were put together bottom to bottom). After they had cured I tried to pull them apart. Both the Plastic Bonder and the Epoxy Paste held with light pulls and twists. Both came apart with a medium/heavy pull. Both the Plastic Bonder and the Epoxy Paste stuck tenaciously to the glass jar, and came off cleanly from the plastic bottle. So it does stick to glass rather well, while holding, but not bonding to the Polypropylene bottle. I would try some on your particular application, (a sample), and see if the medium holding power to the Polypropylene will work for you. The Plastic Bonder was much easier to mix and apply than the Epoxy Paste. The Plastic Bonder cured in about two hours while it took 24 hours for the Epoxy Paste to cure. Both had about the same results as far as the holding power, but the Plastic Bonder when mixed is like a gel, while the Epoxy is a much thicker paste, which means you could use it to fill gaps and holes. It was easy to file/sand the Plastic Bonder after it had cured, the Epoxy Paste could be worked after it had cured, but it was much harder to do so.

Product features

Quick Setting Adhesive

PlasticBonder is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete & more. PlasticBonder has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, PlasticBonder sets to a tan color and cures to a hard, permanent bond.

Additional Benefits

All J-B Weld Syringes have a unique dispensing system allowing customers to re-seal the product, which prevents air from curing the epoxy or adhesive, so they can use it multiple times. J-B Weld also provides a mixing tray and stick in the package so you can get to work right away!

• ★ One Glue To Rule Them All – Glue Masters offers premium quality industrial strength Cyanoacrylate Resin with the strongest bond on the market for your money. With a fast cure and extended shelf life, you can’t go wrong with us!
• ★ A True Quick Fix – Settles in just under 60 seconds, this glue is the epitome of easy. Gently apply a small amount of our Instant Glue, and watch the magic happen. Our well balanced thick viscosity offers more control to the user while still giving you a nice even flow to get the job done right without the mess or hassle.
• ★ A Hobbyist's Best Friend – Helping bring your models, puzzles, and more to completion is our goal! Our glue is the model builder’s first pick for a quality clear hold and a flow you can trust with those delicate planes, trains, and boats. Don’t take our word for it, just take a look at our customer reviews and see for yourself!
• ★ Versatility – From building scale models to repairing shoe sole, fabric, wood, and more, we’re THE glue for general household repairs, carpentry and whatever else you need fixed! It’s truly a must have for anyone’s toolbox. Our 2oz container offers you enough fixing power for any job, large or small.
• ★ Warning – Not to use on fabrics or clothing and always ware eye protection, working in a well ventilated area.

User questions & answers

Question:	will this bond fabric to glass
Answer:	Most definitely. I've used it for bonding various projects. Door seals, jewellery, shoes even! and its incredibly durable and will dry clear, use it sparingly.
Question:	Could I use this for turquoise inlay in wood
Answer:	Should work well for that purpose. I use on wood all the Time.
Question:	what does cps stand for
Answer:	Hello! CPS (unit of centipoise) is a unit of viscosity. We have several viscosity levels in our 16oz format (5 cps, 50 cps, 100 cps, 300 cps, 700 cps, 1500 cps): from 5 cps - super thin to 1500 cps extra thick. It gives you better modulation capabilities depending on your application from curing time and penetration perspective.
Question:	Hi! how can the applicator tip be kept clear? and what is the shelf-life - how long before he whole bottle soldifies...? thank you
Answer:	After you cut the nose and used the ca, put the bottle vertically and squeeze it gently to make sure there is no remaining glue in the applicator. Wipe it and put the cap on. Best way to prolong the shelf life - keep it refrigerated. It will not dry out.

• CRAZY STRONG: Pasco is the strongest CA adhesive. Makes bonding just as strong as welding
• GLUE ANYTHING: There is hardly any material that can't be glued with Pasco's Cyanoacrylate glue
• EASY: Super easy to use. Dries and hardens in seconds. Machineable, tappable, sandable, paintable
• REPAIR: Pasco industrial glue works where other glues fail. Great for Car repairs
• MADE IN GERMANY: Engineered and made in Germany. Highest quality guaranteed

User questions & answers

Question:	Will this work to glue two smooth and polished stainless steel surfaces together
Answer:	Yes-absolutely. Please use a thin layer of the glue only without the filler).
Question:	Will this stick two glossy pieces of Formica laminate countertop together
Answer:	it will stick ,i used it on two smooth metal surfaces that get wet all day in a sink and it has held together for over a month. great stuff use what you need then put the remaining in a frezzer and it lasts for months.
Question:	could it be used to fix a denture
Answer:	Yes, that’s what I used it for. I had a temporary that broke 6 weeks before my implants were ready. I used the “welding” method where you glue the pieces together and then sprinkle the powder over the seam. It held for the 6 weeks I needed and showed no signs of breaking down.
Question:	an old video on youtube on pasco glue states plastics need be "prepared" with a specific fluid before being glued. Is that still the case
Answer:	The following materials should be prepared with PSACO PRIME: PTFE (Teflon) PE (Polyethylen) PP (Polypropylen) TPE (termoplastic elastomere) Silicone Unfortunately the primer product is not available in the US currently. The glue works the upper materials in most cases without the primer as well but the bonding is slower and not as strong as normal.

Product features

Usable just like regular super glue - yet much stronger!

• simple application
• bonds in seconds
• 6 times stronger than regular super glue
• bonds shoes, soles, metal, ceramic, porcelain, glass, wood, stone, etc.

Reinforcement using the filler - the chemical weld

• for extremely strong bonding
• "welding" of broken parts
• allows "impossible" repairs

Filling of holes and cracks

• sanding
• drilling
• tapping
• painting

Modelling

• reconstruction of broken or missing parts
• headlight repair kit
• mirror repair kit
• bumber repair kit
• ...

1. Clean

Thoroughly clean the parts to be welded from oil, grease, dirt, dust, and glue residuals.

Use acetone or nail polish remover for better cleaning results if necessary.

2. Bond

Apply a thin layer of PASCO FIX glue to one of the parts. Usually a single drop of glue is all it takes!

Press the parts together for 5 to 10 seconds.

3. Welding

To create an extremely strong "chemical weld" bonding intermittently apply thin layers of PASCO FIX glue and PASCO FILL filler.

4. Apply force

A few seconds later the bonding is strong enough to resist strong mechanical force.

The strongest glue for almost all materials

• Plastic
• Metal
• Rubber
• Wood
• Glass
• Ceramic
• Stone
• ... almost anything except PE, PP, PTFE, TPE, and silicone

Usable for most bonding tasks

• Shoes
• Tents and foils
• Ceramic and plastic parts
• Furniture
• Camping gear
• Car parts and oldtimer repair
• ... almost anything

Box contents:

• 20ml PASCO FIX glue
• 20gr PASCO FILL filler

Product description

GF 260 High Strength Glue Stick, 1/2" x 12", 15 Sticks To A 1 Lb Bag, Strongest Hot Melt Available, Works With Plastics, Wood And Other Materials

• One of the best Steinel glue sticks, which holds flawless also with strong load
• After cleaning and re-bonding the items they have held together not only under normal use, but under heavy stress as well
• Once set this adhesive provides a tough bond, that is extremely shock resistant
• Steinel glue sticks are recommended when other hot melts fail to do the job
• Suitable for Steinel Hot-Melt Glue Gun TM 6000 and GF 3002

User questions & answers

Question:	Are the general purpose sticks safe for aquarium use? They say non-toxic but do they have additives other than plastic
Answer:	I would not use them for an aquarium
Question:	the plastic handle of the dryer broke, will this be strong enougth to bond plastic to metal and not come off
Answer:	While this is a strong hot glue. I could not recommend for this particular application. A two part epoxy would definitely work much better and last longer.
Question:	Is this good for both porous and non-porous materials
Answer:	Seems to work well on both. On a non porous surface I found it needed to be cleaned with alcohol or paint thinner. Not doing this step will cause the glue to fail in a short period of time.
Question:	These sticks can be bent easily? Like conventional sticks of all purpose? ie they are flexible? I would also like to know the stiffness of this sticks
Answer:	yes they can easily be bent and are flexible too. we use them to stick led lights to the aluminum base of illuminated signs.

Product description

The gorilla super glue gel is an easy-to-use, thicker and more controlled formula great for multiple surfaces and vertical applications. Developed for long-lasting repairs in an instant, the clear glue Dries in 10–45 seconds. This super glue gel is specially formulated to absorb drops, impacts and shocks. Super glue, also referred to as cyanoacrylate glue, or CA glue, works on a variety of materials, including plastic, metal, fabric, stone, ceramic, paper, rubber and more. In addition to its high performance formula, we’ve added an anti-clog cap with a metal pin inside to ensure an airtight seal for maximum reusability. It’s Gorilla tough, every time. Not recommended for use on polyethylene or polypropylene plastic. Service Temperature 65 Degrees Fahrenheit to 220 Degrees Fahrenheit.

• GEL FORMULA: No run control gel formula that is great for use on vertical surfaces
• ANTI CLOG CAP: Helps keep glue from drying out. It's Gorilla tough use after use
• IMPACT TOUGH: Specially formulated for increased impact resistance and strength.
• FAST-SETTING: Dries in 10-45 seconds. No clamping required
• VERSATILE: Bonds plastic, wood, metal, ceramic, rubber, leather, paper and more. Not recommended for use on polyethylene or polypropylene plastic or similar materials

User questions & answers

Question:	Can this be used to repair a car's plastic intake manifold (nylon polymer) ? Is it compatible
Answer:	Hello this is Christopher Stafford of reflections, unfortunately I wouldn’t recommend this item for your particular application. I would recommend Loctite 404. Thanks for your message and interest.
Question:	EPO Foam safe? I have several RC models that are made from EPO and EPP Foam. Would like a quick to repair glue.... Thanks
Answer:	Hello, Gorilla Super Glue Gel is not recommended for use on foam surfaces. If we can be of further assistance, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact and reference case #315176. Thank you, The Gorilla Glue Company
Question:	Will it glue leather to metal
Answer:	Hello, Gorilla Super Glue Gel will work on leather and metal surface. For smooth surfaces, we recommend roughing the surface to provide a texture for the glue to adhere to. For further assistance with your application, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact and reference case #194392. Thank you, The Gorilla Glue Company
Question:	What's the difference between their super glue gel and their super glue
Answer:	Hello Ryan N.,Gorilla Super Glue Gel is a thicker consistency that is perfect for applications on vertical surfaces. Our Gorilla Super Glue and Gorilla Super Glue Gel will have the same holding power. For further assistance with your application, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact.Thank you,The Gorilla Glue Company

Product description

Gorilla super glue gel is an easy-to-use, thicker and more controlled formula great for multiple surfaces and vertical applications. Developed for long-lasting repairs in an instant, the clear glue Dries in 10–45 seconds. This super glue gel is specially formulated to absorb drops, impacts and shocks. Super glue, also referred to as cyanoacrylate glue, or CA glue, works on a variety of materials, including plastic, metal, fabric, stone, ceramic, paper, rubber and more. In addition to its high performance formula, we’ve added an anti-clog cap with a metal pin inside to ensure an airtight seal for maximum reusability. It’s Gorilla tough, every time. Not recommended for use on polyethylene or polypropylene plastic. Click on the Gorilla link at the top of the page to see more great products from The Gorilla Glue Company.

• No run control gel formula; Great for use on vertical surfaces
• Anti-clog cap: Keeps glue from drying out, its Gorilla tough use after use
• Impact tough: Unique rubber particles increase impact resistance and strength
• Fast-setting: dries in 10-30 seconds, no clamping required
• Versatile: Bonds plastic, wood, metal, ceramic, rubber, leather, paper and more

User questions & answers

Question:	Can you glue something to the wall
Answer:	Hello, Gorilla Super Glue Gel will work on most surfaces and has a thick consistency, which makes it ideal for vertical applications. So we can be of further assistance, please contact our Consumer Affairs team at 800-966-3458 or through our website, found in our profile, and reference case #379223. Thank you, The Gorilla Glue Company
Question:	Would this bond steel to wood
Answer:	Hello this is Christopher Stafford of Reflections thanks for your message and interest, unfortunately I wouldn’t recommend this particular unit. I would recommend an epoxy resin for a strong bond. Thanks again for your message.
Question:	How does this perform in consistency and performance to Loc-tite gel control
Answer:	I prefer the gel control
Question:	Does this work on glass
Answer:	Hello, We do not recommend using Gorilla Super Glue Gel on glass. Due to alkalinity in glass, the bond will weaken over time. So we can help, please contact our Consumer Affairs team at 800-966-3458 or the website listed on the back of the packaging and reference case #371617. Thank you, The Gorilla Glue Company

Product description

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B Weld has a tensile strength of 3960 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550ºF when fully cured.

• J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces and creates a bond stronger than steel. Perfect for DIY household, automotive, marine, craft repair and much more.
• CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey.
• VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid.
• SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass.
• DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.
• Will set in 4-6 hours, and cure in 16-24 hours
• Waterproof, petroleum, chemical, and acid resistant when fully cured

User questions & answers

Question:	Could this be used to fix a small (1 x 1/4 inch) crack in a dryer drum? Is there danger it will come off on the clothes
Answer:	When I have had questions about JB Weld products I have called JB Weld & they have answered with good information. Your problem is special because of the temperature that the drum attains. Ask JB Weld.
Question:	Is this product electrically conductive
Answer:	It is NOT electrically conductive. JB Weld is classified as an insulator my the manufacturer (see JB Weld FAQs). In fact it's rated to be microwave safe. Metallic conductors should never be used in a microwave oven, but JB Weld is OK for microwave use.
Question:	I have a number of small leaks in an older aluminum boat-- would JB work for a repair on this as a weld/filler for small punctures? thanks
Answer:	This is a general purpose epoxy that worked great for me on cast iron. It does say you can use it for marine purposes, however you might also consider their product made specifically for water:http://www.amazon.com/J-B-Weld-8277-Water/dp/B000BRQ0TW/ref=sr_1_5?ie=UTF8&qid=1392730373&sr=8-5&keywords=jb+weldor look into the Permatex product made specifically for metalshttp://www.amazon.com/Permatex-84109-PermaPoxy-Minute-Multi-Metal/dp/B000ALDXV2/ref=sr_1_1?ie=UTF8&qid=1392730252&sr=8-1&keywords=metal+epoxy
Question:	block crack between cyls 5 & 7 against the head, at the narrowest point between cyls. both cyls are sleeved. will jb hold the temp without breaking do
Answer:	thanks gpower. was looking online at the temp ratings of different epoxy products, actually found one @2100F, but with low tensile strength. I would like to stay away from welding as the crack is five eights long and sleeved at each end. just now pressure testing and the waterjacket has held 30 lbs for 12 hrs. I may also entertain some of the hi-tech block sealers, if it continues to hold pressure. thanks again for your input, and wish me luck putting life back in this old hemi. Dean

Product features

Original Twin Tube Epoxy

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond with tensile strength of 5020 PSI after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color and fully cures in 15-24 hours.

Additional Attributes

• Can withstand 550°F/287°C
• After curing, J-B Weld Original can be drilled, tapped, filed, sanded, molded and shaped.
• J-B Weld Original is waterproof, petroleum, chemical and acid resistant once fully cured.
• Surface Applications: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass.
• Use On: Household, Automotive, Marine, Plumbing, Crafts, Outdoor Equipment, Agricultural Equipment, Motorcycle, Toys, Boats, Personal Watercraft, In/Outboard Engines and Deck & Hull Accessories.

Product description

Gorilla Super Glue Micro Precise Gel is an easy-to-use, thicker formula combined with a precise, controlled dispensing tool. Designed to fulfill consumers’ desire for an easy-to-use, precise application experience, this NEW Gorilla Super Glue form allows you to apply only the amount of glue that you want, exactly where you need it. This tool was specially designed to fit comfortably into your hand. Click on the Gorilla link at the top of the page to see more great products from The Gorilla Glue Company.

• Gorilla Super Glue Micro Precise Gel is an easy-to-use, thicker formula combined with a precise, controlled dispensing tool.
• No Run Control Precise Gel Formula
• Impact Tough: Reinforced to increase impact resistance and strength
• Smooth Application: Precise, controlled dispensing tool that fits comfortably in hand
• Fast Setting: Dries in 10-45 seconds, no clamping required
• Versatile: Bonds plastic, wood, metal, ceramic, rubber, leather, paper, and more!

User questions & answers

Question:	Will this work on brass to wood
Answer:	In my experience, this glue will join ANYTHING
Question:	for my craft project will it bond together hard plastic and fabric
Answer:	I would say it should. If it keep a thumb nail together, it should glue fabric to hard plastic.
Question:	Is gorilla glue non toxic? Want to put it on a crack in a cup
Answer:	No where can I find that it is non toxic. I would not chance using it on anything that you would eat or drink from
Question:	Can i use this to bond a piece of rope to a piece of resin jewelry
Answer:	It might work, maybe research a bit more on what it works with/for

Product description

The product that started it all. Original Gorilla Glue built a name for itself with its incredible, industrial holding power and versatility. The water activated polyurethane formula expands into materials to form an incredibly strong bond to virtually anything. Gorilla Glue is a 100% waterproof glue, safe for indoor and outdoor use and strong enough to stand up to the elements. Gorilla Glue’s your solution for almost any project or repair. Sand it, paint it, and stain it. Simply stated, it’s the Toughest Glue on Planet Earth. Directions: 1. Prepare and Dampen the Surfaces: All surfaces must be clean, dust free and tight fitting. For shiny surfaces, such as metals, glass and some plastics, roughen up the material to give the glue something to bite into. Lightly dampen one surface with water. We recommend using a damp cloth or spraying with water. Do not saturate the surface. For dense hardwoods, lightly dampen both surfaces prior to gluing. 2. Evenly Apply Gorilla Glue Onto the Dry Surface. Carefully apply onto the dry surface. Do not over apply. We recommend wearing gloves or spreading the glue with a disposable brush. 3. Clamp the Two Surfaces Together Tightly. Make sure the clamping pressure is distributed evenly across the surface. Or, if you don’t have a clamp, use heavy objects or Gorilla Tape to achieve the appropriate clamping pressure. Clamp objects for 1–2 hours. For best results, allow 24 hours to cure. 4. Clean up: If you need to remove any uncured “squeeze out” or wet glue, we recommend wiping with a dry cloth or using a standard paint thinner. Once the glue is dry, it is best removed mechanically: Try sanding, chiseling, scraping or picking. 5. Storage Tips: After each use, wipe the bottle’s lid and nozzle clean with a dry cloth. While still squeezing, tightly replace the cap and then store in a cool, dry place. You should expect a year shelf life. Click on the Gorilla link at the top of this page to see more fine products from the Gorilla Glue Company.

• Incredibly strong and versatile; The leading multi-purpose waterproof glue
• Best for tough repairs on dissimilar surfaces, both indoors and out
• 100% waterproof; Doesn't break down when exposed to outdoor elements
• Versatile; Easily bonds wood, stone, metal, ceramic, foam, glass, concrete and much more
• Incredibly Strong: Expands 3 times into the materials to form an incredibly strong bond

User questions & answers

Question:	Will this work on vinyl
Answer:	polyurethane glue sticks to practically everything - including your skin and clothing. One thing you should know about it is that as it dries, Gorilla Glue expands when it cures, creating a foam 3x thicker than the original application. If you are trying to seam-seal vinyl flooring, this would not be a good choice.
Question:	Does this work with concrete to concrete? My 4' blue stone step fell and I don't want to redo the mortar
Answer:	Answer: VHB Tape provides the simplicity of a tape fastener with incredible strength. May replace rivets, bolts, screws, spot welds, liquid adhesives and other permanent fasteners. Glue is unaffected be extreme heat, cold, or water - great for indoor and outdoor repairs - 100 Percent waterproof Creates an incredibly strong bond to most surfaces including wood, stone, metal, ceramics, foam, glass, brick, concrete and more Glue expands 3-4 times while penetrating the surfaces for additional strength; Dried glue is paintable, stainable and sandable
Question:	Can I use this to add tile to painted sheetrock
Answer:	The glue swells as it dries, it would not be suited for gluing anything together that you would want to be perfectly flat and can not vice together. Since this glue swells according to how much you use, you would have to be pretty darn accurate per tile.
Question:	How do I get gorilla premium glue off my hands? I have tried thinners, turpentine, meths,petrol & hand cleaner
Answer:	First off, never use soap and water initially, or it will just make it alot harder (nearly impossible) to remove. The best solution I have found is to just use Goop all by itself first. The stuff with pumice seems to work best. Anyway, apply the Goop to your hands and rub them together vigorously, use one hand to wrap around each finger of the other a clean each finger individually, then repeat with the other hand, then sprwad your fingers on both hands and interlace them to get between all fingers. THEN (very important) wipe off your hands completely with a DRY paper towel or rag. If your hands still feel at all sticky, then do the above AGAIN. Once you have wiped off all the glue and most of the goop with the paper towels you can wash your hands if desired, but it would be best to wait if you can as the goop will continue to break down the slight glue residue. If after all this you still have sticky hands tyou can make them less annoying by applying talcum (baby) powder.

Product description

3M Scotch-Weld Plastic & Rubber Instant Adhesive PR40 is a low viscosity instant adhesive. Our PR100 instant adhesive is formulated to give exceptional performance on difficult-to-bond substrates, such as EPDM, nylon, polypropylene and polyethylene with the use of an appropriate primer. Once applied, the glue is fast handling time and care to keep jobs moving quickly.

• Bonds to a number of substrates, including plastics and rubbers
• Precise application: pinch container for a precise drop or squeeze for a steady bead
• Low viscosity adhesive is easily applied from the bottle
• Strong, durable and long lasting bond on a variety of substrates
• Fast curing to keep projects moving quickly

User questions & answers

Question:	Can this be used for the plastic hinge in a car console? Plastic on plastic
Answer:	I used this to repair the hood on my John Deer Lawn Tractor. I believe the material is ABS. After using the 3M Scotch Weld to stich the 12 individual pcs back together I used body compound on the outer surface sanded and repainted the broken hood. That was in October of 2020. The hood is holding up well. Be aware that I used Scotch weld and Baking soda. See -You tube regarding this method. The baking soda creates an instant strong bond. Wear the proper gloves.
Question:	This product was the result of a search for best ceramic glues. Is it good for antique china repairs
Answer:	Not my first choice
Question:	Would it work on gluing back rubber pads on the nose bridge of plastic frame sunglasses
Answer:	Yes, This glue will be effective in gluing pads onto sunglasses frames. If they are metal, you'd be best off scuffing the metal with sandpaper to ensure adhesion; for plastic this won't be a problem.
Question:	Can this glue be used on hdpe coupling to pvc pipe
Answer:	I wouldn't suggest it. Use PVC pipe glue. It comes in clear as well.

Product features

3M Scotch-Weld Plastic & Rubber Instant Adhesive PR40

3M Scotch-Weld Plastic & Rubber Instant Adhesive PR40 is a low viscosity instant adhesive. The PR100 instant adhesive is formulated to give exceptional performance on difficult-to-bond substrates, such as EPDM, nylon, polypropylene and polyethylene with use of an appropriate primer. Once applied, the glue has fast handling time and cure to keep jobs moving quickly.

Product description

Features:

Especially applied to small units and resident families

10 times stronger than any other glue pen

Features as non-toxic, permanent, odorless and water resistant,can repair almost anything



3 easy steps, very simple to apply

1. Used advanced technology, glue is environmental safe and passed the EU 174 project non-hazardous testing

2. Quick and supper powered permanent bonding in 5-10 seconds

3. Glue:4ML Density:1.12 Viscosity:1200CPS 1pen with 320 drops

4. Light with special wave length and battery lifespan are 10 hours

How to use:

Gave a gentle squeeze on the tube, and got some of the goopy liquid out onto the seam between the two pieces shined the UV light LED onto the liquid.

1. Use Prep Pad Clean The Bonding Face

2. Apply appropriate glue to cure

3. Harden with the UV light for 5-10 seconds.

Note:



If any question, please feel free to contact our team, we will try best to help.

• Not A Normal Glue,Much Stronger Than Any Other Glue Guaranteed, Fix Other Glue Cannot and You Can Even Build Up Material with It, and That Material is Structually Strong. Magical for Small Parts that Demand Great Strength
• Repair Almost Anything: Plastic,Glass,Wood,Metal,Fabric,Stainless Steel, PVC,ABS,Acrylic,Ceramic And More. From the Precious Jewelry to Multiple Craft Projects with the Lowest Cost
• Creates a Permanent Bond In 5-10 Seconds With the Prep Pad Clean The Bonding Face And Cure&Shape Under The UV Light. The UV Curing is Very Fast and Makes Precarious Repairs Possible Without Difficult Clips and Jigs to Hold a Complex Joint While Glue Dires
• Safe,Non-hazardous Formula,Water Proof and Heat Resistant. Used Advanced Technology, It is also Environmental Safe and Passed the EU 174 Project Testing
• Kit Includes: 1 Glue Pen + 8g Refill+UV Light With Battery. Please Follow the Instruction on the Backside.

User questions & answers

Question:	what type batterydoes it use...is it replacable
Answer:	Battery is not replaceable. Buy a new one.
Question:	will this hold up on a broken false tooth
Answer:	I really don't know for sure. I know it will set up pretty fast, but really does not cure real hard for at least 24 hours. I seen video were the set up and then sand or grind to shape the material to the desired shape. It is suppose to set up fast, but I found it cured really hard after about 12 hours. It might work for you, sure can't hurt, if it does not hold, you will have to remove all the excess by sanding or grinding. Also don't know what the saliva in your mouth will do to the clue over time. Might ask a dentist, what they would use.
Question:	Will it work on bath tub (outside) to hold a plastic moulding
Answer:	It worked for me inside a refrigerator for a shelf and for a tray. I would think it would work to hold plastic molding. Just remember, it is NOT glue. Unless the light can reach it, it will not set up. It must be in an area the light can "see".
Question:	How do I "unglue" this because the item was glued crooked
Answer:	as far is my experience I would intuitively say live with it and be more careful next time