14 best strongest glue for wood

Product description

J-B Wood Weld is a fast setting two-part epoxy system formulated for wood bonding and repairs. When fully cured it can be shaped, tapped, filed, sanded and drilled. It provides a lasting permanent bond that is stronger than the wood! J-B Wood Weld has a 1: 1 mixing ratio, sets in 6 minutes and cures in 1-3 hours. Rated at a tensile strength of 1800 PSI, J-B Wood Weld cures to a light tan colour.

• J-B Weld Woodweld: a fast setting two-part epoxy system formulated for wood bonding and repairs. WoodWeld provides permanent and lasting bonds that are stronger than wood! Perfect for all indoor/outdoor wood DIY repair projects
• Cure and set time: after mixing the tubes at a 1:1 ratio, it takes 6 minutes to set and 1-3 hours to cure. Once cured, WoodWeld can be painted, tapped, filled, sanded, molded and drilled. WoodWeld’s set and cure color is light tan
• Versatile and depedable: J-B Weld WoodWeld has a tensile strength of 1800 PSI. The product will not shrink or foam allowing it to be used as a structural adhesive or filler. No clamping necessary due to the short set time
• Applications: indoor or outdoor projects, furniture, doors, windows, trim, molding, decks, wood restoration projects, rotting wood repair, and more
• Do it yourself: big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond

User questions & answers

Question:	Can the mixed epoxy be injected with a syringe to ensure it fills a deep screw hole? Need to make sure the hole is filled in order to drill a new hole
Answer:	You can certainly try. I am not sure it will be thin enough to fit in a syringe. I would use the original JB Weld (8265S) rather than the Wood Weld. It can be drilled and tapped and is the strongest product we have. Thanks JB Weld support
Question:	Can I use this to repair chair legs that my dog chewed ver badly or should I use regular wood filler
Answer:	This is much stronger than wood filler, you can only work with a little at a time though, it dries very quickly so I suppose it depends how many repairs you need to make. I would probably still use J-B Weld, the finished repairs will be much stronger. Don't know what sort of finish you want to use afterwards that would be a factor too. If you are painting over the repairs it will be great for that.
Question:	can one drill and srew into it
Answer:	Yes, but I would always drill a pilot hole before screwing in a wood or sheet metal screw,
Question:	What is highest temperature a cured joint can withstand
Answer:	It's made for wood, so if wood burns then that is the highest temperature it can withstand.

Product features

Quick Setting Epoxy

WoodWeld is a fast setting two-part epoxy system formulated for wood bonding and repairs. When fully cured it can be shaped, tapped, filed, sanded and drilled. It provides a lasting permanent bond that is stronger than wood! WoodWeld has a 1:1 mixing ratio, sets in 6 minutes and cures in 1-3 hours. Rated at a tensile strength of 1800 PSI, WoodWeld will cure to a light tan color.

Additional Attributes

• WoodWeld will not shrink or foam allowing it to be used as a structural adhesive or as a filler.
• 6 minute set time eliminates the need for clamping.
• WoodWeld can be used on wood repairs inside or outside!

• ★ One Glue To Rule Them All – Glue Masters offers premium quality industrial strength Cyanoacrylate Resin with the strongest bond on the market for your money. With a fast cure and extended shelf life, you can’t go wrong with us!
• ★ A True Quick Fix – Settles in just under 60 seconds, this glue is the epitome of easy. Gently apply a small amount of our Instant Glue, and watch the magic happen. Our well balanced thick viscosity offers more control to the user while still giving you a nice even flow to get the job done right without the mess or hassle.
• ★ A Hobbyist's Best Friend – Helping bring your models, puzzles, and more to completion is our goal! Our glue is the model builder’s first pick for a quality clear hold and a flow you can trust with those delicate planes, trains, and boats. Don’t take our word for it, just take a look at our customer reviews and see for yourself!
• ★ Versatility – From building scale models to repairing shoe sole, fabric, wood, and more, we’re THE glue for general household repairs, carpentry and whatever else you need fixed! It’s truly a must have for anyone’s toolbox. Our 2oz container offers you enough fixing power for any job, large or small.
• ★ Warning – Not to use on fabrics or clothing and always ware eye protection, working in a well ventilated area.

User questions & answers

Question:	will this bond fabric to glass
Answer:	Most definitely. I've used it for bonding various projects. Door seals, jewellery, shoes even! and its incredibly durable and will dry clear, use it sparingly.
Question:	Could I use this for turquoise inlay in wood
Answer:	Should work well for that purpose. I use on wood all the Time.
Question:	what does cps stand for
Answer:	Hello! CPS (unit of centipoise) is a unit of viscosity. We have several viscosity levels in our 16oz format (5 cps, 50 cps, 100 cps, 300 cps, 700 cps, 1500 cps): from 5 cps - super thin to 1500 cps extra thick. It gives you better modulation capabilities depending on your application from curing time and penetration perspective.
Question:	Hi! how can the applicator tip be kept clear? and what is the shelf-life - how long before he whole bottle soldifies...? thank you
Answer:	After you cut the nose and used the ca, put the bottle vertically and squeeze it gently to make sure there is no remaining glue in the applicator. Wipe it and put the cap on. Best way to prolong the shelf life - keep it refrigerated. It will not dry out.

• CRAZY STRONG: Pasco is the strongest CA adhesive. Makes bonding just as strong as welding
• GLUE ANYTHING: There is hardly any material that can't be glued with Pasco's Cyanoacrylate glue
• EASY: Super easy to use. Dries and hardens in seconds. Machineable, tappable, sandable, paintable
• REPAIR: Pasco industrial glue works where other glues fail. Great for Car repairs
• MADE IN GERMANY: Engineered and made in Germany. Highest quality guaranteed

User questions & answers

Question:	Will this work to glue two smooth and polished stainless steel surfaces together
Answer:	Yes-absolutely. Please use a thin layer of the glue only without the filler).
Question:	Will this stick two glossy pieces of Formica laminate countertop together
Answer:	it will stick ,i used it on two smooth metal surfaces that get wet all day in a sink and it has held together for over a month. great stuff use what you need then put the remaining in a frezzer and it lasts for months.
Question:	could it be used to fix a denture
Answer:	Yes, that’s what I used it for. I had a temporary that broke 6 weeks before my implants were ready. I used the “welding” method where you glue the pieces together and then sprinkle the powder over the seam. It held for the 6 weeks I needed and showed no signs of breaking down.
Question:	an old video on youtube on pasco glue states plastics need be "prepared" with a specific fluid before being glued. Is that still the case
Answer:	The following materials should be prepared with PSACO PRIME: PTFE (Teflon) PE (Polyethylen) PP (Polypropylen) TPE (termoplastic elastomere) Silicone Unfortunately the primer product is not available in the US currently. The glue works the upper materials in most cases without the primer as well but the bonding is slower and not as strong as normal.

Product features

Usable just like regular super glue - yet much stronger!

• simple application
• bonds in seconds
• 6 times stronger than regular super glue
• bonds shoes, soles, metal, ceramic, porcelain, glass, wood, stone, etc.

Reinforcement using the filler - the chemical weld

• for extremely strong bonding
• "welding" of broken parts
• allows "impossible" repairs

Filling of holes and cracks

• sanding
• drilling
• tapping
• painting

Modelling

• reconstruction of broken or missing parts
• headlight repair kit
• mirror repair kit
• bumber repair kit
• ...

1. Clean

Thoroughly clean the parts to be welded from oil, grease, dirt, dust, and glue residuals.

Use acetone or nail polish remover for better cleaning results if necessary.

2. Bond

Apply a thin layer of PASCO FIX glue to one of the parts. Usually a single drop of glue is all it takes!

Press the parts together for 5 to 10 seconds.

3. Welding

To create an extremely strong "chemical weld" bonding intermittently apply thin layers of PASCO FIX glue and PASCO FILL filler.

4. Apply force

A few seconds later the bonding is strong enough to resist strong mechanical force.

The strongest glue for almost all materials

• Plastic
• Metal
• Rubber
• Wood
• Glass
• Ceramic
• Stone
• ... almost anything except PE, PP, PTFE, TPE, and silicone

Usable for most bonding tasks

• Shoes
• Tents and foils
• Ceramic and plastic parts
• Furniture
• Camping gear
• Car parts and oldtimer repair
• ... almost anything

Box contents:

• 20ml PASCO FIX glue
• 20gr PASCO FILL filler

• CONVENIENT STORAGE - 1 adhesive system, 4 application options: can be stored in refrigerator/freezer for 1-2 years or longer; use for bonding, strengthening, modelling, filling. Up to 600% more effective than regular adhesives.
• HG POWER GLUE BONDS 93% OF ALL MATERIALS - plastic, wood, rubber, glass, metal, aluminum, ceramics, stone etc., this adhesive system forms a tight bond with everything that belongs together
• IDEAL GLUE FOR A HOST OF APPLICATIONS - a crack in the bumper or motorcycle fairing, a broken headlight bracket, torn RV paneling or simply an instant fix for your child’s favorite toy
• SAVE TIME AND MONEY - Nearly all household items can be salvaged quickly at an affordable price. The chemical weld only takes seconds to set and is weatherproof and extremely durable. Resistant to heat and cold (-49°F to +239°F), waterproof and machineable
• SUPERIOR BOND STRENGTH - Welding Glue from the bottle is unparalleled in its performance and, due to its unique combination of powder and glue, achieves significantly better bonds than standard glues

Product features

YOUR TOP BENEFITS AT A GLANCE:

• 600% more sticking strength than anything you’ve ever known.
• Makes impossible repairs possible
• No more gluing of the dosing tip – it holds for 1-2 years
• 4 different possible applications
• No prior knowledge necessary

Delivery: Adhesive: 25ml (0.8 oz) granules: 40g (1.4 ounces)

Made in USA

What can the HG Power Glue really do?

Through the alternating application of powder and industrial adhesive, a bomb-proof chemical compound is created in just a few seconds, which permanently and cost-effectively repairs broken parts, cracks, and tears.

The HG industrial adhesives are very long lasting cyanoacrylate adhesives.

For filling and reinforcing

• Ideally suited for use on extreme fractures.

For cracks

• With soft materials (such as tarpaulins, rubber, etc.) the bonding joint remains elastic.
• With transparent materials (such as glass, perspex, etc.) the bonding joint remains transparent.

Modelling

• Reconstruct broken parts

The bonded area can be sanded and painted immediately after curing.

Which materials work with HG Power Glue?

Plastic, metal, glass, wood, rubber, stone, and porcelain are all materials that can easily and permanently be glued using HG Power Glue.

Which ones don’t?

Attention: silicone and plastics like PE (Polyethylene) or PP (Polypropylene) can only be permanently bonded together by using a primer.

Not suitable for absorbent materials (textils, jeans, ...)

Step 1: Clean surface

In order for the Weld in a Bottle to develop its full adhesive power, it is essential that the surface of the breakage is first sand the surface then clean it thoroughly. The surface must be clear of any and all residue such as rust, grease, glue or dust and the surface must be completely dry.

We recommend the specially manufactured HG Cleaner to ensure a fully cleaned surface.

Step 2: Apply powder

Now that the surfaces are properly prepared, the damaged parts are joined together exactly at the point of the breakage. The welding powder is applied directly and generously but the height of the powder should not exceed 2mm during application.

Without the second component – the industrial adhesive – there is no chemical reaction at this point.

Step 3: Apply adhesive

In the third step, the glue is dripped over top of the granulate until the powder is saturated. When the two substances come into contact, there is an immediate chemical reaction and heat is generated.

It is recommended that both sides of the breakage. The more often you repeat the application process, the stronger the adhesive will be.

Step 4: Harden the chemical weld seam

It only takes a few seconds for the complex chemical reaction to be completed and for the Weld from a Bottle to develop its bomb-proof strength.

The bonded area can be sanded and painted immediately after curing and is much more stable than conventional adhesive bond.

Actual strength may vary by material.

USE GLUE ONLY? - No problem (examples below)

• PVC taroaulin
• Porcelain
• Ceramic repair
• Shoes repair
• Leather
• and much more

Watch the videos above! We show you a few applications and of course some hardness tests.

Product description

GF 260 High Strength Glue Stick, 1/2" x 12", 15 Sticks To A 1 Lb Bag, Strongest Hot Melt Available, Works With Plastics, Wood And Other Materials

• One of the best Steinel glue sticks, which holds flawless also with strong load
• After cleaning and re-bonding the items they have held together not only under normal use, but under heavy stress as well
• Once set this adhesive provides a tough bond, that is extremely shock resistant
• Steinel glue sticks are recommended when other hot melts fail to do the job
• Suitable for Steinel Hot-Melt Glue Gun TM 6000 and GF 3002

User questions & answers

Question:	Are the general purpose sticks safe for aquarium use? They say non-toxic but do they have additives other than plastic
Answer:	I would not use them for an aquarium
Question:	the plastic handle of the dryer broke, will this be strong enougth to bond plastic to metal and not come off
Answer:	While this is a strong hot glue. I could not recommend for this particular application. A two part epoxy would definitely work much better and last longer.
Question:	Is this good for both porous and non-porous materials
Answer:	Seems to work well on both. On a non porous surface I found it needed to be cleaned with alcohol or paint thinner. Not doing this step will cause the glue to fail in a short period of time.
Question:	These sticks can be bent easily? Like conventional sticks of all purpose? ie they are flexible? I would also like to know the stiffness of this sticks
Answer:	yes they can easily be bent and are flexible too. we use them to stick led lights to the aluminum base of illuminated signs.

• Grade: Medium, Curing Speed: 30 seconds, Viscosity: 100 cps
• Extended Shell Life, Fast Cure, Strongest Bond on The Market
• Less than a minute Cure Time
• Perfect for any material: Metal, Plastic, Wood and More
• Strongest Super Glue

User questions & answers

Question:	I broke a high heel of a pair of shoes, will this glue help me to keep the high heel back
Answer:	I am cautious as well. I phoned the company about this issue. The live microbes withstand a relatively high temperature for a period of time ( I think two weeks) so they can be shipped without ice packs. Prior to opening, they should be stored in a cool, dry place ( below 77 degrees I think). The way to tell if they are still viable is to open the bottle and check the color. They should be a nice cream color. If they are too dark and look yellow or brown, they are either old or have not been stored well or were in too much heat for too long, etc. But, the color is the best way to tell. When they arrive I always put them in the refrigerator.
Question:	Will this dry clear. I am wanting to fill a knot hole in a piece of wood
Answer:	I cut and paste the following out of my amazon review of this product: I was very nervous about purchasing online because of the refrigeration issue but went ahead and ordered with 2 day shipping. After taking them for several days I read an answered question on Amazon about a "milk test". It said you could open a capsule into some milk, and if it was live probiotics, it would curdle in 20 minutes. I decided to research this and found several things online. However, 20 minutes will not do the trick. Depending on the probiotic, it can take anywhere from 12-48 hours. I got two glasses and filled each with a 1/4 cup of milk. One glass was left untouched, the other I opened a RenewLife capsule into. After 18 hours the glass with the renewlife looked like custard and smelled like sour milk. The glass with plain milk remained unchanged. Success! Google "milk test for probiotics" and you'll find several sources including video.
Question:	Is this product thick enough to be able to glue something light onto a vertical surface? It's a small plastic bracket
Answer:	We do ship DHL Express
Question:	The bumper on my car is a little bit lose on one end. Would this hold it fine
Answer:	Este producto puede viajar 14 días a temperatura ambiente.

Product description

Aliphatic resin glue is used by more than 95% of instrument builders due to its unique properties. Titebond Original Wood Glue is the industry standard for aliphatic resin wood glue.

• Provide a much stronger bond than the wood itself
• Offer excellent heat-resistance and are very easy to sand
• Are water cleanup while still wet
• Provide strong initial tack and a 30-minute clamp time
• Conform to ASTM D4236 – Non-toxic and safe to use

User questions & answers

Question:	Would titebond iii work well adhering wine corks to a mirror
Answer:	With a non-slip concave design and a portable handle buckle，the bottle is very easy to carry. And the bottle is very light in weight, about 210g.Nice for working!
Question:	Is it clear when it dries
Answer:	This bottle keeps you accountable on a subconscious level.It is marked to make sure that your daily water intake is on track.
Question:	i'm planning to make an arched laminate wood beam about 14 foot long 2 x 6, is this glue strong enough to hold the beam together
Answer:	This bottle is made of food-grade BPA Free eco-friendly plastic which is free from plastic taste and odors.
Question:	Since this glue "cleans up with water" (yet its water proof?), if i use this in joints, on an outdoor bench, willrain affect the glue
Answer:	You just need to unscrew the cap, then it becomes a wide-mouth bottle, there is no problem putting fruit into it!

Product features

Titebond III Ultimate Wood Glue

Description:

Titebond III Ultimate Wood Glue is the first one-part, water cleanup wood glue ever offered that is proven waterproof. The waterproof formula passes the ANSI/HPVA Type I water-resistance specification and offers superior bond strength, longer open assembly time and lower application temperature. Titebond III is non-toxic, solvent free and cleans up with water - safer to use than traditional waterproof wood glues. It provides strong initial tack, sands easily without softening and is for indirect food contact (cutting boards). The ultimate in wood glues - ideal for both interior and exterior applications.

Features:

• Passes ansi/hpva type I water-resistance
• Waterproof formula that cleans up with water
• Superior strength - strong initial tack
• Designed for interior and exterior applications
• Longer open assembly time
• Lower application temperature
• Unaffected by finishes

Product description

The gorilla super glue gel is an easy-to-use, thicker and more controlled formula great for multiple surfaces and vertical applications. Developed for long-lasting repairs in an instant, the clear glue Dries in 10–45 seconds. This super glue gel is specially formulated to absorb drops, impacts and shocks. Super glue, also referred to as cyanoacrylate glue, or CA glue, works on a variety of materials, including plastic, metal, fabric, stone, ceramic, paper, rubber and more. In addition to its high performance formula, we’ve added an anti-clog cap with a metal pin inside to ensure an airtight seal for maximum reusability. It’s Gorilla tough, every time. Not recommended for use on polyethylene or polypropylene plastic. Service Temperature 65 Degrees Fahrenheit to 220 Degrees Fahrenheit.

• GEL FORMULA: No run control gel formula that is great for use on vertical surfaces
• ANTI CLOG CAP: Helps keep glue from drying out. It's Gorilla tough use after use
• IMPACT TOUGH: Specially formulated for increased impact resistance and strength.
• FAST-SETTING: Dries in 10-45 seconds. No clamping required
• VERSATILE: Bonds plastic, wood, metal, ceramic, rubber, leather, paper and more. Not recommended for use on polyethylene or polypropylene plastic or similar materials

User questions & answers

Question:	Can this be used to repair a car's plastic intake manifold (nylon polymer) ? Is it compatible
Answer:	Hello this is Christopher Stafford of reflections, unfortunately I wouldn’t recommend this item for your particular application. I would recommend Loctite 404. Thanks for your message and interest.
Question:	EPO Foam safe? I have several RC models that are made from EPO and EPP Foam. Would like a quick to repair glue.... Thanks
Answer:	Hello, Gorilla Super Glue Gel is not recommended for use on foam surfaces. If we can be of further assistance, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact and reference case #315176. Thank you, The Gorilla Glue Company
Question:	Will it glue leather to metal
Answer:	Hello, Gorilla Super Glue Gel will work on leather and metal surface. For smooth surfaces, we recommend roughing the surface to provide a texture for the glue to adhere to. For further assistance with your application, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact and reference case #194392. Thank you, The Gorilla Glue Company
Question:	What's the difference between their super glue gel and their super glue
Answer:	Hello Ryan N.,Gorilla Super Glue Gel is a thicker consistency that is perfect for applications on vertical surfaces. Our Gorilla Super Glue and Gorilla Super Glue Gel will have the same holding power. For further assistance with your application, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact.Thank you,The Gorilla Glue Company

Product description

The product that started it all. Original Gorilla Glue built a name for itself with its incredible, industrial holding power and versatility. The water activated polyurethane formula expands into materials to form an incredibly strong bond to virtually anything. Gorilla Glue is a 100% waterproof glue, safe for indoor and outdoor use and strong enough to stand up to the elements. Gorilla Glue’s your solution for almost any project or repair. Sand it, paint it, and stain it. Simply stated, it’s the Toughest Glue on Planet Earth. Directions: 1. Prepare and Dampen the Surfaces: All surfaces must be clean, dust free and tight fitting. For shiny surfaces, such as metals, glass and some plastics, roughen up the material to give the glue something to bite into. Lightly dampen one surface with water. We recommend using a damp cloth or spraying with water. Do not saturate the surface. For dense hardwoods, lightly dampen both surfaces prior to gluing. 2. Evenly Apply Gorilla Glue Onto the Dry Surface. Carefully apply onto the dry surface. Do not over apply. We recommend wearing gloves or spreading the glue with a disposable brush. 3. Clamp the Two Surfaces Together Tightly. Make sure the clamping pressure is distributed evenly across the surface. Or, if you don’t have a clamp, use heavy objects or Gorilla Tape to achieve the appropriate clamping pressure. Clamp objects for 1–2 hours. For best results, allow 24 hours to cure. 4. Clean up: If you need to remove any uncured “squeeze out” or wet glue, we recommend wiping with a dry cloth or using a standard paint thinner. Once the glue is dry, it is best removed mechanically: Try sanding, chiseling, scraping or picking. 5. Storage Tips: After each use, wipe the bottle’s lid and nozzle clean with a dry cloth. While still squeezing, tightly replace the cap and then store in a cool, dry place. You should expect a year shelf life. Click on the Gorilla link at the top of this page to see more fine products from the Gorilla Glue Company.

• Incredibly strong and versatile; The leading multi-purpose waterproof glue
• Best for tough repairs on dissimilar surfaces, both indoors and out
• 100% waterproof; Doesn't break down when exposed to outdoor elements
• Versatile; Easily bonds wood, stone, metal, ceramic, foam, glass, concrete and much more
• Incredibly Strong: Expands 3 times into the materials to form an incredibly strong bond

User questions & answers

Question:	Will this work on vinyl
Answer:	polyurethane glue sticks to practically everything - including your skin and clothing. One thing you should know about it is that as it dries, Gorilla Glue expands when it cures, creating a foam 3x thicker than the original application. If you are trying to seam-seal vinyl flooring, this would not be a good choice.
Question:	Does this work with concrete to concrete? My 4' blue stone step fell and I don't want to redo the mortar
Answer:	Answer: VHB Tape provides the simplicity of a tape fastener with incredible strength. May replace rivets, bolts, screws, spot welds, liquid adhesives and other permanent fasteners. Glue is unaffected be extreme heat, cold, or water - great for indoor and outdoor repairs - 100 Percent waterproof Creates an incredibly strong bond to most surfaces including wood, stone, metal, ceramics, foam, glass, brick, concrete and more Glue expands 3-4 times while penetrating the surfaces for additional strength; Dried glue is paintable, stainable and sandable
Question:	Can I use this to add tile to painted sheetrock
Answer:	The glue swells as it dries, it would not be suited for gluing anything together that you would want to be perfectly flat and can not vice together. Since this glue swells according to how much you use, you would have to be pretty darn accurate per tile.
Question:	How do I get gorilla premium glue off my hands? I have tried thinners, turpentine, meths,petrol & hand cleaner
Answer:	First off, never use soap and water initially, or it will just make it alot harder (nearly impossible) to remove. The best solution I have found is to just use Goop all by itself first. The stuff with pumice seems to work best. Anyway, apply the Goop to your hands and rub them together vigorously, use one hand to wrap around each finger of the other a clean each finger individually, then repeat with the other hand, then sprwad your fingers on both hands and interlace them to get between all fingers. THEN (very important) wipe off your hands completely with a DRY paper towel or rag. If your hands still feel at all sticky, then do the above AGAIN. Once you have wiped off all the glue and most of the goop with the paper towels you can wash your hands if desired, but it would be best to wait if you can as the goop will continue to break down the slight glue residue. If after all this you still have sticky hands tyou can make them less annoying by applying talcum (baby) powder.

Product description

The strength and versatility you have come to expect from Gorilla Glue is now available in an easy to use, crystal clear, non-foaming formula. Clear Gorilla Glue is incredibly strong and is ideal for indoor and outdoor applications and bonds virtually everything.

• Crystal clear
• Non-foaming
• Water resistant
• Incredibly strong
• Easy to use

User questions & answers

Question:	I need to secure some metal screw bushings for a guitar bridge. With this bond or secure the metal bushings into the wood of the guitar
Answer:	Hello, Clear Gorilla Glue will work on metal and wood surfaces. For further assistance with your application, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact and reference case #269461. Thank you, The Gorilla Glue Company
Question:	Will this work to glue edges of linoleum in our camper
Answer:	Hello, Clear Gorilla Glue will work on linoleum. The application will need to be clamped for at least two hours. If we can be of further assistance, please contact our Consumer Affairs team at 800-966-3458 or the website listed on the back of the packaging and reference case #370123. Thank you, The Gorilla Glue Company
Question:	Is there a low viscosity version of this glue or can it be thinned. I want to adhere some tinted, translucent plastic film to glass. Thanks
Answer:	Hello, Clear Gorilla Glue cannot be thinned. If we can be of further assistance, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact and reference case #293416. Thank you, The Gorilla Glue Company
Question:	Will this work on a terracotta planter
Answer:	Hello, Clear Gorilla Glue will work on terracotta, however, it is water resistant and not waterproof. If we can be of further assistance with your application, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact and reference case #232709. Thank you, The Gorilla Glue Company

Product description

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B Weld has a tensile strength of 3960 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550ºF when fully cured.

• J-B WELD ORIGINAL PRO SIZE: Professional 5 OZ Tubes of the Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces and creates a bond stronger than steel. Perfect for DIY household, automotive, marine, craft repair and much more.
• CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original set and cure color is dark grey.
• VERSATILE AND DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius. When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid.
• SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass.
• DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.

User questions & answers

Question:	Could this be used to fix a small (1 x 1/4 inch) crack in a dryer drum? Is there danger it will come off on the clothes
Answer:	When I have had questions about JB Weld products I have called JB Weld & they have answered with good information. Your problem is special because of the temperature that the drum attains. Ask JB Weld.
Question:	Is this product electrically conductive
Answer:	It is NOT electrically conductive. JB Weld is classified as an insulator my the manufacturer (see JB Weld FAQs). In fact it's rated to be microwave safe. Metallic conductors should never be used in a microwave oven, but JB Weld is OK for microwave use.
Question:	I have a number of small leaks in an older aluminum boat-- would JB work for a repair on this as a weld/filler for small punctures? thanks
Answer:	This is a general purpose epoxy that worked great for me on cast iron. It does say you can use it for marine purposes, however you might also consider their product made specifically for water:http://www.amazon.com/J-B-Weld-8277-Water/dp/B000BRQ0TW/ref=sr_1_5?ie=UTF8&qid=1392730373&sr=8-5&keywords=jb+weldor look into the Permatex product made specifically for metalshttp://www.amazon.com/Permatex-84109-PermaPoxy-Minute-Multi-Metal/dp/B000ALDXV2/ref=sr_1_1?ie=UTF8&qid=1392730252&sr=8-1&keywords=metal+epoxy
Question:	block crack between cyls 5 & 7 against the head, at the narrowest point between cyls. both cyls are sleeved. will jb hold the temp without breaking do
Answer:	thanks gpower. was looking online at the temp ratings of different epoxy products, actually found one @2100F, but with low tensile strength. I would like to stay away from welding as the crack is five eights long and sleeved at each end. just now pressure testing and the waterjacket has held 30 lbs for 12 hrs. I may also entertain some of the hi-tech block sealers, if it continues to hold pressure. thanks again for your input, and wish me luck putting life back in this old hemi. Dean

Product features

Original Twin Tube Epoxy

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond with tensile strength of 5020 PSI after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color and fully cures in 15-24 hours.

Additional Attributes

• Can withstand 550°F/287°C
• Compatible Surfaces: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile, Fiberglass and more!
• Repairs/Uses: Household, Automotive, Marine, Plumbing, Crafts, Outdoor Equipment, Agriculture Equipment, Motorcycles, Toys, Boats, Watercraft, In/Outboard Engines, Deck & Hull Accessories and more!

Product description

Only waterproof and stainable wood glue available. Painted formula delivers superior bond strength and stainability. Resists heat, mold, and mildew. Great for indoor and outdoor projects. Sandable and paintable. Easy water clean up and nontoxic. No. E7290: Size: 4 oz., Pkg Qty: 1, Package Type: Bottle No. E7300: Size: 8 oz., Pkg Qty: 1, Package Type: Bottle No. E7310: Size: 16 oz., Pkg Qty: 1, Package Type: Bottle No. E7330: Size: 1 gal, Pkg Qty: 1, Package Type: Bottle For more than 65 years, Elmer's Products, Inc. has been providing creative adhesive solutions that support success and turn ideas into reality.

From the Manufacturer

For decades, Elmer's has been making it easier to successfully complete projects exactly the way you want. Elmer's products have been a familiar sight in workshops and homes across the country for over 60 years. Elmer's Carpenter's Wood Glue MAX is for interior and exterior applications. Carpenter's Wood Glue MAX combines real wood fibers in its formula, which delivers superior staining when the job is done. You'll get better results on staining, painting, and sanding than with ordinary wood glues. With Wood Glue MAX, the wood will break before the bond does. ANSI Type 1 waterproof. Easy to clean up with water. Comes in a variety of sizes. When it's time for a specific fix, Elmer's application-focused adhesives make it easy to find exactly the right Elmer's for the job!

• Bonds stronger than wood
• Non-toxic, no harmful fumes, and easy to clean up with water
• Resists heat, mold, and mildew
• 16-ounce bottle of extra-strength wood adhesive
• Elmer's: The Glue with the Orange Cap
• 16 ounce bottle of extra-strength wood adhesive
• Resists heat, mold and mildew

User questions & answers

Question:	On E7310's product description, it says ANSI Type 1 waterproof. It is not soluble in water after dry. right
Answer:	I've never glued drywall and prefer to use the recommended placement of it using drywall screws or nails. This has a drying time when using it. Do not know how to stabilize the drywall in place if you were to glue it. Although I think it would hold, once dry, I wouldn't recommend it.
Question:	Hi, I'm trying to glue a mirrow to the hutch part of my desk. Do you think this will work and not fall apart on me
Answer:	This product has an average shelf life of two years if unopened.
Question:	What is the lowest temperature the glue can set at
Answer:	You will still need nails to hit the wall joists. The glue will work, but it will eventually pull the layer of paint or Sheetrock paper from the wall. Glue is mainly used in corners where molding like chair rails meet each other.
Question:	Is this pet friendly
Answer:	This is very good glue, but I do not know if it will hold under water. I use this glue for exterior wood projects and I am satisfied for my use.

Product description

The product that started it all. Original Gorilla Glue built a name for itself with its incredible, industrial holding power and versatility. The water activated polyurethane formula expands into materials to form an incredibly strong bond to virtually anything. Gorilla Glue is a 100% waterproof glue, safe for indoor and outdoor use and strong enough to stand up to the elements. Gorilla Glue’s your solution for almost any project or repair. Sand it, paint it, stain it. Simply stated, it’s the Toughest Glue on Planet Earth. Directions: 1. Prepare and Dampen the Surfaces: All surfaces must be clean, dust free and tight fitting. For shiny surfaces, such as metals, glass and some plastics, roughen up the material to give the glue something to bite into. Lightly dampen one surface with water. We recommend using a damp cloth or spraying with water. Do not saturate the surface. For dense hardwoods, lightly dampen both surfaces prior to gluing. 2. Evenly Apply Gorilla Glue Onto the Dry Surface. Carefully apply onto the dry surface. Do not over apply. We recommend wearing gloves or spreading the glue with a disposable brush. 3. Clamp the Two Surfaces Together Tightly. Make sure the clamping pressure is distributed evenly across the surface. Or, if you don’t have a clamp, use heavy objects or Gorilla Tape to achieve the appropriate clamping pressure. Clamp objects for 1–2 hours. For best results, allow 24 hours to cure. 4. Clean up: If you need to remove any uncured “squeeze out” or wet glue, we recommend wiping with a dry cloth or using a standard paint thinner. Once the glue is dry, it is best removed mechanically: Try sanding, chiseling, scraping or picking. 5. Storage Tips: After each use, wipe the bottle’s lid and nozzle clean with a dry cloth. While still squeezing, tightly replace the cap and then store in a cool, dry place. You should expect a year shelf life. Click on the Gorilla link at the top of this page to see more fine products from the Gorilla Glue Company.

• Imported
• Incredibly strong and versatile; The leading multi-purpose waterproof glue
• Best for tough repairs on dissimilar surfaces, both indoors and out
• 100% Waterproof; Doesn't break down when exposed to outdoor elements
• Versatile; Easily bonds wood, stone, metal, ceramic, foam, glass, concrete and much more!
• Incredibly Strong: Expands 3 times into the materials to form an incredibly strong bond

User questions & answers

Question:	Has anyone glued marble
Answer:	YUP works good.
Question:	Is this clear colored when dried
Answer:	No it does not drie clear, It dries with a beige color. It also expands a good bit after application so use cautiously.
Question:	is gorilla glue food safe
Answer:	can gorilla glue be used to repair food dishes
Question:	Will this glue work on shoe insoles to prevent slipping
Answer:	It would likely hold well, but dry to lumpy for comfort for insoles. I've used it to glue soles on slippers which works well, and holds for a long time.Used shoe glue in the past for outer soles, and found it worthless, which is why I tried Gorlla this time.

Product description

Its high strength and quick set time make Gorilla Super Glue the go-to for a variety of household projects. Developed for long-lasting repairs in an instant, Gorilla Super Glue is designed with an impact-tough formula to handle bumps and drops with a strong, reliable bond.

• Impact Tough: Reinforced to increase impact resistance and strength
• Anti Clog Cap: Keeps glue from drying out. It's Gorilla Tough use after use
• Fast-setting: Dries in 10-45 seconds, no clamping required
• Versatile: Bonds plastic, wood, metal, ceramic, rubber, leather, paper, and more

User questions & answers

Question:	Is this made from gorillas saliva
Answer:	No I won't Gorilla glue is a polyurethane and can't be affected by saliva
Question:	can i use it in Jewerlies
Answer:	Hi... Please don't rely on my opinion exclusively, but I don't think I would suggest using this version on jewelry. The reason I say this is because one of my repairs involved a piece of painted glass that cracked in half. While the glue certainly held well, it also left a strange, powdery-looking residue around the outside of the repair that is hard to get off and does not look very good at all. I think I would suggest using this glue only on "bigger" repairs like fixing a broken chair leg or something along those lines where you won't be seeing the repair point closely. Hope this helps!
Question:	Can I use this to install a car spoiler instead of 3m
Answer:	You can, I'd imagine. You'd need a lot of it, and you would want to be sure it bonded to the metal, not the paint. AND you'd want to clean the metal well with rubbing alcohol or some such. I'd stick to the recommended material for anything that's going to be encountering 70+mph wind resistance.
Question:	What is the difference between regular Gorilla super glue and the super glue XL in both the gel and regular,thanks
Answer:	Hello, "XL" just pertains to the larger size bottles containing more glue. The difference between Gorilla Super Glue and Gorilla Super Glue Gel is the consistency. Gorilla Super Glue Gel has a much thicker consistency making it ideal for vertical applications. If we can be of further assistance, please contact our Consumer Affairs team at 800-966-3458 or the website listed on the back of the packaging and reference case #369933. Thank you, The Gorilla Glue Company