14 best loctite adhesives
Product description
We combine innovation and technology leadership and close customer partnership to deliver solutions that are an essential part of countless industrial and consumer goods. We utilize our global presence and our expert knowledge to offer a winning combination of best-in-class service and leading technologies to customers and consumers around the world.
From the Manufacturer
Loctite Power Grab All-Purpose Clear Construction Adhesive in a squeeze tube is a premium quality, high strength, gap-filling adhesive.
- Item Weight: 0.698 lb
- Country of Origin: China
- Brand name: Loctite
- Item Dimensions: 2.0"L x 6.0"W x 1.5"H
User questions & answers
Question: | How easy is it to clean off |
Answer: | I have not had to clean any product off. I only applied what was necessary. the container says to clean with soap and water before product dries |
Question: | Can I use it on fabric |
Answer: | Doubtful! |
Question: | can this be used to glue down carpet tile |
Answer: | Personally I used it for a bathroom wall tile & it's been a year and it's still there. I found this glue to work very well. It might be so good that it would be extremely hard to remove. |
Question: | Can this be used for outdoor applications. Will it withstand hot/cold/wet weather |
Answer: | It is water soluble coming out of the tube...not rubbery like tile caulk. It grows very hard when dried. I have not seen it in direct weather. I experience a slight molding in high a humidity environment....that alone may make it unsuitable. |
Question: | Will this work for installing around bathroom ceiling when instaling new pvc planks |
Answer: | I haven't done it on the ceiling personally, but there is a guy who has done it on the reviews, where he's done it on his ceilings as ceiling moldings or PVC as you want to do. Hope that helps. |
Question: | Does this have a fold in the middle of tape |
Answer: | Yes. The caulk tape has a fold so you can position half on the wall and half on the bath. |
Question: | What is the height of the actual strip |
Answer: | 1.5 inches |
Question: | Is each roll 3.2m or is that the total length |
Answer: | 3.2 m for each roll. The length is enough for normal size bathtub on 3 sides with some spare. |
Product features
Use our caulk strip to make your house like a new one!
Waterproof and Mildewproof Strip:
Made of hight quality PVC material, waterproof, damp proof, corrosion-resistant, anti-acid and caustic, mould proof, oil-proof, anti-bumping, durable and sturdy to use.
Convenient self adhesion:
Made of high-quality PVC material,features stronger stickiness and adhesion than traditional PVC
Easy to clean:
This Waterproof resistant sealant strip has a smooth and beautiful surface which is easy to wipe off oil stains and dirt
Free cutting:
Caulking strip tape is flexible makes it convenient and fast to cut as much as you need according to the actual needs.
Step 1
Clean and dry the gap.
Step 2
Heat the caulk strip by hair dryer, Peel off the backing paper protection layer.
Step 3
Fold the caulk strip in half, make the strip centre line and corner coincide exactly.
Step 4
Press the caulk strip, make it stick tightly to the wall surface, cut off the extra part, and then wait 10-24 hours before using.
Widely Use
Stick them around the gas stove, underneath your toilet, sink, basin, tile joints , fix ugly and old grout to prevent getting oily and black.
Attentions:
Product description
Provides adhesion to most common construction materials. Designed for sub-floor installations. Can be used on polystyrene foam, wood, metal, fiberglass, masonry, ceramic tile, marble, osb and most common types of building materials. Resistant to moisture, dampness and temperature changes. Fast cure. Non-staining. Meets afg-01 astm c 577, astm d 3498 and conforms to hud um 60a specifications. With a 1/4 inch bead 10.2 oz cartridge covers approximately 30 lin. Ft. And a 29 oz. Cartridge covers approximately 90 lin. Ft.
From the Manufacturer
For over 50 years, Loctite has provided customers with advanced adhesive and sealing solutions. Loctite PL Premium Polyurethane Construction Adhesive is a one component, polyurethane based, moisture-curing adhesive. It is VOC compliant and contains no chlorinated solvents or water. Loctite PL Premium provides superior adhesion to most common construction materials. It can be used for interior or exterior projects and is three times as strong as conventional solvent based construction adhesives. It is also waterproof, paintable and cures even in cold temperatures, making it ideal for sub floor installations. Our uncompromising level of quality and innovation is achieved through a strong commitment to research and development. This commitment to innovation, quality and reliability has truly earned Loctite the reputation of delivering "Trusted Performance. Proven Results".
- High performance urethane-based adhesive, environmentally safe, twice the coverage of conventional adhesives & 3 times stronger
- Adds extra shine to your product
- Manufactured in China
- It provides superior adhesion to most common construction materials.
- Can be used for interior or exterior projects and is 3 times as strong as ordinary construction adhesives.
- It is also waterproof, paintable and cures even in cold temperatures.
- Ideal for sub floor installations.
- Can be applied directly to dry, wet or frozen lumber.
User questions & answers
Question: | Can I use this to re-glue some self stick floor ties that have come loose |
Answer: | Yes, I believe it will work. You should be careful not to apply too much as it may ooze around the edges of the tiles. Wipe up any that does seep out right away with a paper towel with mineral spirits. You will probably want to weigh the tiles down until the glue fully sets - about a half hour should do it. Avoid full traffic for 24 hours. |
Question: | Will this work on a painted concrete surface ? Applying a stone veneer to an outside painted cinder block wall |
Answer: | I used it to waterproof holes in a reinforced concrete roof for the passage of solar electric cables and solar hot water circulating pipes. The roof was painted with standard latex. Worked perfectly. |
Question: | could I use this product to "glue" metal screen to concrete block (to block out rats |
Answer: | The "performance Facts" as written on the label reads: Adheres to Wood,OSB,Drywall,Brick,CONCRETE, Masonry,Stone,Marble, Granite,METAL,Pvc,Foam Insulation.I have used it to glue together broken Roof tiles and it works pretty good for that too. I would suggest using some tape To help maintain the screen in its place while the glue completely cures. |
Question: | can glue be used to reinforce stick on tiles in corners and around pipes and radiators |
Answer: | Yes, it will stick and it will stay. |
Product features
Loctite PL Premium Polyurethane Construction Adhesive
Ideal for Bonding: wood, treated wood, hardwood flooring, concrete, stone, marble, slate, masonry, brick, foam insulation, metal, lead, cement-based product, ceramic, fiberglass, and drywall.
Benefits: 3x as strong as ordinary construction adhesive, Interior or Exterior use, Waterproof, Paintable, Cures in Cold Temperatures.
Size: 10 fl. Oz. and 28 fl. Oz cartridge.
3x Stronger Than Ordinary Adhesive
Superior Bonding
Bonds Most Materials
Interior/Exterior Use
Step 1:
Cut tip and puncture inner seal.
Step 2:
Apply with caulk gun.
Step 3:
Press together within 15-20 minutes.
Step 4:
Full cure in 24 hours.
Product description
Loctite Power Grab Express Heavy Duty Construction Adhesive 9 Ounce Cartridge (2032666)
- Bonds a variety of construction materials indoors and out such as wood, drywall, plaster, ceramic, concrete, masonry, brick, foam board, cork and aluminum
- Made in United States
- Repositionable for 15 minutes
- Package weight :0.408 kg
- Meets ASTM D3498 for wet and frozen lumber and is GREENGUARD Indoor Air Quality Certified for children and schools
User questions & answers
Question: | Would this hold rear wheelwell panels? Like metal to metal bond |
Answer: | Might work if you use screws to hold both together, but use with nothing else to make sure it holds, will come apart in a short time |
Question: | Will this work overhead |
Answer: | We used it to put up sound panels on a ceiling. The panels were reasonably lightweight similar to foam rubber 2 inches thick. Power grab held them in place immediately. |
Question: | Did yours come with a cap? Seems like the cost-cutting is getting riddiculous |
Answer: | Yes mine had a cap. They should always come with a cap, I would imagine yours just got lost somewhere along the packaging and shipping. |
Question: | Can you glue concrete blocks together |
Answer: | You can glue concrete blocks together but would not use on like a wall construction |
Product description
Loctite Spray Adhesive High Performance 200, 13.5 Oz. Spray Can (2235317)
- No reworking
- Invisible bond
- Does not bubble
- Increases bond strength
User questions & answers
Question: | Will this product still work on fabric after it's been washed several times |
Answer: | I doubt it, the adhesive will be useless. |
Question: | Can u use this spray inside a jacket |
Answer: | I wouldn’t use it on any type of clothing. |
Question: | Can this be used to lock a puzzle |
Answer: | I'm sure it can, it's a great adhesive |
Question: | Has anyone used this spray on sublimation transfers to prevent ghosting |
Answer: | Yes |
Product features
Loctite Spray Adhesive High Performance 200
Loctite Spray Adhesive High Performance is a premium quality formulation that dries clear and has a superior bonding strength.
It dries quickly and is ideal for a wide range of household and automotive repair projects. Loctite Spray Adhesive High Performance will work on a variety of porous and nonporous substrates.
- Variety of applications
- Invisible bond
- Increases bond strength
- No reworking
- Will not damage photographs
- Repositionable or permanent bonding
- Dries clear and will not yellow with age
- Can apply multiple coats
- Does not bubble
- Acid Free
Product description
Loctite PL Premium Polyurethane Construction Adhesive is a one component, polyurethane based, moisture-curing adhesive. It is VOC compliant and contains no chlorinated solvents or water. Loctite PL Premium provides superior adhesion to most common construction materials. It can be used for interior or exterior projects and is 3X as strong as ordinary construction adhesives. It is also waterproof, paintable and cures even in cold temperatures. Ideal for sub floor installations.
- Adhesive comes in a 4 oz. Tube, is perfectly safe to use, repositionable and VOC compliant for sale in all 50 States
- Constructed of 100% polyurethane, this adhesive is perfect for both indoor and outdoor projects and is guaranteed to last as long as the surface you’re using it on
- This polyurethane adhesive is as much as 8X stronger than your typical construction adhesive
- It performs better than the original PL premium formulation, especially when it comes to grab power
- The adhesive makes a great choice for bonding nearly all types of construction materials like wood, treated wood, hardwood, flooring, concrete, stone, marble, slate, masonry, brick and more
User questions & answers
Question: | Can this be used to attach ceramic tile to the front of a mirror |
Answer: | Have not tried to attach impervious objects to impervious substrates. In the project I just completed, (following the advice of a local stained glass store) I used 'Weldbond' glue to attach stained glass to a glass table top. It has not been in use long enough for me to comment on durability. |
Question: | Is this product suitable for attaching a towel rack to a tile wall |
Answer: | Yes but it’ll take 24 hrs for the adhesive to cure completely |
Question: | Will this work to paste an acrylic sheet (plexiglass) onto a plywood table top |
Answer: | I don't know why it wouldn't. We used it on rocks that make up our firepit and it's holding them in place quite well. |
Question: | Has anyone used this to bond wood to metal? I'm needing to re-glue a metal piece to the bottom of a drawer. The drawer slides on that metal piece |
Answer: | Yes, this product will bond the drawer slide to the bottom of the drawer. Make sure both surfaces are clean before applying. |
Product description
Loctite, 13. 5 OZ, General Purpose, Spray Adhesive, Dries Clear and Quickly, Superior Bonding Strength, Ideal For Household and Automotive Repair Projects, Works On A Variety Of Porous and Nonporous Substrates, Bonds Paper, Cardboard, Foam, Fabric, Leather, Felt, Cork, Foil, Certain Plastics, Metal, Glass and Wood.
- Premium quality clear formula for arts and crafts, paper, cloth, cardboard, cork and many other materials
- Use for temporary or permanent bonds
- Dries quickly
User questions & answers
Question: | Can you use this spray to keep glitter on a dress? Will it make the dress stiff |
Answer: | I would not. It'll remain tacky. Glitter would stick but the fabric will stick to your skin and on its own folds. |
Question: | Does it dry clear |
Answer: | Yes! It dries clear. I don't care for the sprayer cap, which I changed out from an old can. But it's a good product. |
Question: | Will this work for a puzzle |
Answer: | Absolutely. I used it to secure leather to foam for a motorcycle seat and it has held up great. You should have no issues using it to secure puzzle pieces. Although if you are using it to spray over the top, consider epoxy resin or spray lacquer. |
Question: | When this is first sprayed on, does it bubble up or does it go on flat - like a spray paint |
Answer: | It definitely doesn't bubble up and, it's not as "wet" as spray paint. |
Product description
Loctite 2292244 Construction Adhesive, Gray
- Strongest bond to all materials even compared to PL premium
- Remains solid and doesn’t develop air pockets, better resisting building material movement
- Fast grab and is re-positional
- Easy to gun in cold weather
- No run-on
User questions & answers
Question: | will this product bond PVC trim board to vinyl |
Answer: | Yes it will. |
Question: | after application and drying, does the adhesive remains flexible or stone hard |
Answer: | it will hard up as it sets and cures |
Question: | What's the difference between this and the less expensive premium 3x version |
Answer: | faster set up time more durable and stronger bond... |
Question: | Will this bond concrete to concrete for outdoor use |
Answer: | I have not tried that application... The instructions state that it adheres to concrete ..... thus, I would try a sample application, & Allowing for required curing time, give the sample joint a simulated stress-test about 2 to 3 times the intended strain. I’d bet you’ll be satisfied. Wes |
Product description
For over 50 years, Loctite has provided customers with advanced adhesive and sealing solutions. Loctite power grab express all purpose interior construction adhesive with 0 second instant grab holds objects instantly without nailing or bracing. An object applied with the adhesive can be repositioned for up to 15 minutes after initial application. It has a very low odor, and requires only soap and water to clean up. This makes it safe, easy to use and environmentally friendly. Loctite power grab express all purpose is also third party greenguard indoor air quality certified for children and schools. Our uncompromising commitment to innovation, quality and reliability has truly earned Loctite the reputation of delivering "trusted performance. Proven results".
- Bonds a variety of construction materials such as wood, drywall, plaster, ceramic, concrete, masonry, brick, foam board and cork
- 0 second instant grab holds instantly without nailing or bracing
- Repositionable for 15 minutes
- Low odor, water clean-up
- Greenguard indoor air quality certified for children and schools
User questions & answers
Question: | Does this work with pvc ceiling palels |
Answer: | I never had the opportunity to use on ceiling panels. I used it to glue the handle on my favorite coffee mug which is quite heavy. I've had no issues since I glued it, I even put the mug in the microwave every morning to warm milk, and the glue has tested to be a great product! |
Product description
Gel Control Super Glue is resistant to moisture, most chemicals and freezing temperatures. With easy, no-drip application, glue stays put with no running. Gel glue works faster and holds stronger on more surfaces than ordinary instant adhesives thanks to a patented additive. The gel formula works on a variety of porous and nonporous surfaces and is ideal for vertical applications. Use on ceramics, leather, rubber, wood, paper, metal and plastics. Glue dries clear and sets without clamping. Glue comes in patented, side-squeeze design for maximum control.
- Ideal for ceramics, leather, rubber, wood, paper, metal and plastics
- Comes in patented, side-squeeze design for maximum control
- Glue dries Clear and sets without clamping
- 0.14 fl oz.; 1 Each
User questions & answers
Question: | Can I use in refrigerator |
Answer: | Yes you should be able to. The gel glue is absolutely awesome. Its quick to hold and stronger than the same.brand super glue by far. The cold temps shouldn't be an issue.. |
Question: | Is this cyanoacrylate |
Answer: | Yes it does contain cyanoacrylate. |
Question: | If I use this to repair a ceramic mug, would it still be dishwasher and microwave safe |
Answer: | Hi No the heat from the dishwasher will break down the glue |
Question: | Can it be used to glu felt fabric |
Answer: | I know this is an old post,but... I use it to glue paper models and it works great. I had a friend try to glue fabric with it and it would not work at all; the fabric was to porous. |
Product description
High-strength, gap-filling adhesive delivers instant grab for your indoor jobs. This extremely high-tack adhesive reduces the need for nails and screws in many do-it-yourself projects and repair jobs. It is recommended for bonding a variety of construction materials such as wood, drywall, plaster, ceramic, concrete, masonry, brick, foam board and cork. It requires only soap and water to clean up. Easy cleanup and very low odor make this premium-quality adhesive safe easy to use and environmentally friendly. Loctite Power Grab Express All-Purpose Adhesive is also third-party, Greenguard Indoor Air Quality Certified and Greenguard Certified for Children and Schools.
- Zero second instant grab reduces need for bracing and nailing
- Repositionable for 15 minutes so ideal for precision alignment of surfaces
- Water-based, low-odor formula
- Soap and water cleanup eliminates the use of chemicals
- Environmentally friendly
User questions & answers
Question: | Would this be a good option for gluing xps rigid foam to basement concrete wall |
Answer: | I think that is an issue as to the foam. So far this stuff has been effective for me with everything but bonding a threshold of laminate to concrete floors. |
Question: | Is this suitable for no nail towel rack onto glazed bathroom tiles |
Answer: | NO,I TRIED TO PUT A THIN VINYL SQUARE ON MY PORCH(WOOD)AND IT CAME OFF AFTER ONE DAY |
Question: | Does Lactate power grab dry clear |
Answer: | It fires white. |
Question: | does this item dry clear |
Answer: | Really like this product, but it doesn't dry exactly clear, dries translucent white. |
Product description
Loctite PL Premium Fast Grab Polyurethane Construction Adhesive 10-Ounce Cartridge (1417170)
- Loctite PL premium, 10 oz., fast grab polyurethane construction adhesive, superior results & is safe to use
- Adds extra shine to your product
- Manufactured in China
User questions & answers
Question: | Will this work on cinder block in my basement that is bringing water in |
Answer: | If you are very careful in applying it. |
Question: | How much old stock did you receive |
Answer: | Not sure what you meant by old stock. The tubes we received worked great. |
Question: | will this product hold pictures on plaster walls |
Answer: | Yes it will! |
Question: | Hints on how to get glue out of tube easier |
Answer: | Believe it or not, most people forget to puncture the end of the tube inside the white plastic spout. If you look at the end of your caulking gun, there's a metal spike about two inches in length that's designed to puncture the cap inside that spout. Even then, that glue is pretty thick and it's still difficult to get out. I lay a tube in the sun for a couple of hours prior to using. Helps it flow easier. |
Product features
Loctite PL Premium 3x
Ideal for Bonding: wood, treated wood, hardwood flooring, concrete, stone, marble, slate, masonry, brick, foam insulation , metal, lead, cement-based product, ceramic, fiberglass, drywall, mirrors.
Benefits: 3x as strong as ordinary construction adhesive, Interior or Exterior use, Waterproof, Paintable, Cures in Cold Temperatures.
Size: 10 fl. Oz. and 28 fl. Oz cartridge.
Loctite PL Premium 8x Fast Grab
Ideal for Bonding: wood, treated wood, hardwood flooring, concrete, stone, marble, slate, masonry, brick, foam insulation of all sorts, carpets, metal, lead, cement-based products, ceramic, fiberglass, drywall and mirrors.
Benefits: 8x as strong as ordinary construction adhesives, Interior or exterior use, Superior Initial Grab, Allows for repositioning, VOC Compliant, Waterproof, Paintable, Cures in all temperatures.
Size: 10 fl. Oz cartridge.
Product description
Vinyl fab plastic adhesive 1.0oz.. this product is manufactured in Canada. Product belongs to arts, crafts and sewing.
From the Manufacturer
For over 50 years, Loctite has provided customers with advanced adhesive and sealing solutions. Loctite Vinyl, Fabric and Plastic Flexible Adhesive is a clear liquid adhesive formulated for repairing and mending flexible plastics such as vinyl seats, cushions, tarps and outdoor gear. It dries to a transparent and waterproof bond. It will not yellow or go brittle with age or sunlight. Our uncompromising level of quality and innovation is achieved through a strong commitment to research and development. This commitment to innovation, quality and reliability has truly earned Loctite the reputation of delivering "Trusted Performance. Proven Results".
- This product is manufactured in canada
- Flexible adhesive for vinyl, fabric & plastic
- Repair household items such as, shoes, toys, tools and weather stripping
- Bonds paper, glass, leather, wood, fabric, rubber and some plastics. Ideal for repairing seat covers, beach balls, vinyl inflatable mattresses, vinyl upholstery, raincoats and wading pools
- Dries clear for invisible repairs
- Waterproof for interior or exterior applications
- 1-Fluid ounce tube
User questions & answers
Question: | Will this work on polypropylene (pp |
Answer: | I have a distinct feel that it will in fact dissolve or melt polypropylene materials. I put some in the bottom of a solo cup so I could paint it onto a canvas patch, and it was breaking down the inside of the cup. |
Question: | Will this work for re-attaching the fabric top of my Spenco insole for my jogging shoes? It has lifted off from the rubber bottom. Thanks |
Answer: | I don't think it will adhere to the rubber of the sole. |
Question: | Would this work to repair a rubber watch band |
Answer: | I do not know. It works on the padded seat to my weight bench |
Question: | Can this be used to repair a vinyl dock bumper |
Answer: | I've used it to repair a torn vinyl weather stripping on a 12 X 12 foot commercial garage door by just doing multiple layers. |
Product features
Loctite Vinyl, Fabric and Plastic Repair Adhesive 1-Ounce Tube
Loctite Vinyl, Fabric & Plastic Flexible Adhesive is a clear liquid adhesive formulated for repairing and mending flexible plastics such as vinyl seats, cushions, tarps and outdoor gear.
It dries to a transparent and waterproof bond. It will not yellow or go brittle with age or sunlight.
- Interior or exterior applications
- Easy to use; Invisible repairs
- Long lasting repairs
- Waterproof
- Dries clear; Eliminates unsightly tapes or patches
- Remains flexible; Will not brittle or yellow with age
Product description
Loctite's Prism series instant adhesives are the highest performance instant adhesives available to the industry. Toughened products provide superior impact resistance and shear strength. Product: 380 Typical Use: Close Fitting Parts Color: Black Gap Fill: 0.006" Resin Base: Ethyl Viscosity Cp: 200 Strength (Psi) Tensile Shear: 3,750 Temperature Range: -65°F - 225°F Cure Speed Fixture: 90 Sec. Full Cure: 24 Hrs. 1 oz. bottle Hazmat Product. All Hazmat items are non-refundable and non-returnable, and must ship via ground carrier. Additional shipping charges may apply.
User questions & answers
Question: | Will this bond PVC plastic to silicone rubber |
Answer: | I can't say. I'd try silicone adhesive first. |
Question: | Once applied, how much time do you have to work with this adhesive before it starts to set up |
Answer: | Think of 380 as a super glue that is more flexible and less brittle. When the parts are pressed together it starts to set in minutes depending on how much pressure you apply. Until than it stays fairly liquid. |
Question: | Which Loctite 380 would work for gluing rubber on a boat? Are any 100% marine grade |
Answer: | I only know of one Loctite 380. It is simply a super glue that dries none-brittle. It may have a higher peel strength than regular super glue. I would do a test section. It works great but not on all surfaces. |
Question: | Can it be removed with acetone after setting up |
Answer: | It's almost impossible to remove from the skin on your fingers with acetone if it dries on them (wear gloves!) - no way it will come off a glued object after it dries - you have to scrub it off your skin with an abrasive pad. I use this stuff to glue golf club heads to shafts because of it's high strength - you can remove heads from shafts by heating up the old glue with a heat gun and using a special head puller, so you might be able to separate parts by heating them up after the glue cures - but DO NOT heat this glue to get it to dry or cure faster - when heated while still wet, it releases toxic fumes that will make your eyes and nose feel like you got hot peppers in them! (no smells or fumes if you let it air dry) |
Product description
Loctite 60 Second Universal Glue, 0. 6-Fluid Ounce Tube (1983330)
- Fast, versatile, 1 part all-purpose glue, bonds in 60 seconds
- Easy to use gel formula stays in place during application, can be used on vertical or overhead application without dripping
- Can be used on a wide variety of common materials
- Repositionable for 10-15 seconds
- 60 second high bond strength, full cure in 24 hours
- Remains permanently flexible for a durable, long lasting bond
- Water resistant bond, not recommended for constant submersion though
User questions & answers
Question: | Will this hold a 40 lb mirror to the wall |
Answer: | No way, don't even try unless you want 7 years of bad luck!! |
Question: | What color does it dry |
Answer: | Clear. |
Question: | Has anyone used this to attach fabric o silicone |
Answer: | It will bond to both. They make a fabric glue, also |
Latest Reviews
View all
Ge Large Room Fans
- Updated: 03.06.2023
- Read reviews

Medical Mask
- Updated: 21.05.2023
- Read reviews

New Electric Wine Openers
- Updated: 11.05.2023
- Read reviews

Wall Mounting Screws
- Updated: 10.05.2023
- Read reviews

Car Adapters
- Updated: 24.01.2023
- Read reviews