14 best epoxy wood glues

Product description

J-B Wood Weld is a fast setting two-part epoxy system formulated for wood bonding and repairs. When fully cured it can be shaped, tapped, filed, sanded and drilled. It provides a lasting permanent bond that is stronger than the wood! J-B Wood Weld has a 1: 1 mixing ratio, sets in 6 minutes and cures in 1-3 hours. Rated at a tensile strength of 1800 PSI, J-B Wood Weld cures to a light tan colour.

• J-B Weld Woodweld: a fast setting two-part epoxy system formulated for wood bonding and repairs. WoodWeld provides permanent and lasting bonds that are stronger than wood! Perfect for all indoor/outdoor wood DIY repair projects
• Cure and set time: after mixing the tubes at a 1:1 ratio, it takes 6 minutes to set and 1-3 hours to cure. Once cured, WoodWeld can be painted, tapped, filled, sanded, molded and drilled. WoodWeld’s set and cure color is light tan
• Versatile and depedable: J-B Weld WoodWeld has a tensile strength of 1800 PSI. The product will not shrink or foam allowing it to be used as a structural adhesive or filler. No clamping necessary due to the short set time
• Applications: indoor or outdoor projects, furniture, doors, windows, trim, molding, decks, wood restoration projects, rotting wood repair, and more
• Do it yourself: big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond

User questions & answers

Question:	Can the mixed epoxy be injected with a syringe to ensure it fills a deep screw hole? Need to make sure the hole is filled in order to drill a new hole
Answer:	You can certainly try. I am not sure it will be thin enough to fit in a syringe. I would use the original JB Weld (8265S) rather than the Wood Weld. It can be drilled and tapped and is the strongest product we have. Thanks JB Weld support
Question:	Can I use this to repair chair legs that my dog chewed ver badly or should I use regular wood filler
Answer:	This is much stronger than wood filler, you can only work with a little at a time though, it dries very quickly so I suppose it depends how many repairs you need to make. I would probably still use J-B Weld, the finished repairs will be much stronger. Don't know what sort of finish you want to use afterwards that would be a factor too. If you are painting over the repairs it will be great for that.
Question:	can one drill and srew into it
Answer:	Yes, but I would always drill a pilot hole before screwing in a wood or sheet metal screw,
Question:	What is highest temperature a cured joint can withstand
Answer:	It's made for wood, so if wood burns then that is the highest temperature it can withstand.

Product features

Quick Setting Epoxy

WoodWeld is a fast setting two-part epoxy system formulated for wood bonding and repairs. When fully cured it can be shaped, tapped, filed, sanded and drilled. It provides a lasting permanent bond that is stronger than wood! WoodWeld has a 1:1 mixing ratio, sets in 6 minutes and cures in 1-3 hours. Rated at a tensile strength of 1800 PSI, WoodWeld will cure to a light tan color.

Additional Attributes

• WoodWeld will not shrink or foam allowing it to be used as a structural adhesive or as a filler.
• 6 minute set time eliminates the need for clamping.
• WoodWeld can be used on wood repairs inside or outside!

Product description

Devcon epoxy adhesive cures and joins materials together by a chemical reaction between the resin and hardener. This reaction results in a high strength bond that is resistant to most chemicals. Use Devcon Epoxy adhesive for household, industrial, crafts or for any job that requires a high-strength, high-quality bond. Works best on metal, wood, concrete, glass, ceramics, china and much more. 2-Ton Epoxy sets in 30 minutes with strength up to 2,500 lbs. per square inch. Dries clear; water resistant.

• Ideal for joining wood, metal, concrete, glass, ceramics, china and more
• Sets in 30 minutes with strength up to 2,500 pounds per square inch
• Includes 2 bottles; 4-1/2 ounce bottles
• Dries clear
• water resistant

User questions & answers

Question:	After opening, what are the components shelf life? Anyway to lengthen their viability
Answer:	Bought some of this same brand/same size "at least" 40 years ago! It was kept (unfortunately) in my garage (NO HEATING OR AC) for most of this time... temps here can range anywhere from a low of 12 degrees. F to 105 degrees during the course of what one could consider a "typical" year. To my EXTREME SURPRISE...This stuff worked great up until LAST YEAR!!! The resin now appears to show some signs of "separation", but even still... if I take time to assure the resin is stirred in the bottle to a consistent appearance before dispensing, it will still harden and secure the items I use it on. It takes longer to reach a full cure than in the past, but works for my non-critical needs. I can't comment on whether it has the same total bonding power as when new, but it DOES still bond! I am however now finally buying a NEW set so that I can put projects in service based on the product's original "full bonding time frame" (mine takes longer now), and for items that are either too difficult access at will (for a potential re-do") or too critical in function to take chances with bonding failure. GREAT PRODUCT provided they haven't monkeyed with the formula since I bought mine! Even drinking water has a "shelf-life", so I'm totally amazed this stuff has performed so well during the 40 years or so I've had it!!!
Question:	Will it melt blue styrofoam
Answer:	oh yes as fast as it hits it, jim
Question:	Two questions: Is the mix pourable, and what is the maximum temperature that the cured resin can tolerate
Answer:	After mixing, the mixture is viscous but can still be poured (immediately). Maximum temperature before release of toxic fumes is
Question:	I'm really looking for something equivalent to super glue but in this size bottles. Question is do need to use and mix both bottles for it to glue
Answer:	need to use equal parts of each tube, mix well. drying time will be stated on tubes, depending on type you buy...30 sec. to 30 min. or more. usually acetone clean-up before dried, acetone soak will also release bond, as will heat over 325 degrees.whatever quantity needed will still be a 1-1 mix, but keep in mind working time vs dry time, so not to mix more than you can use before hardening. denatured alcohol can thin mixture

Product description

Gorilla takes epoxy to a new level—the Gorilla tough level. With its superior solvent and water resistance, Gorilla epoxy adhesive is incredibly strong and durable for household and automotive repairs alike. The easy-to-use syringe keeps the epoxy resin and hardener separate, so it is easy to dispense and won’t harden over time. The two-part, gap-filling formula easily bonds steel, aluminum, glass, wood, ceramic, tile and most plastics. Plus, it Dries in an ideal, crystal-clear finish that makes projects look spotless. Directions: 1. Prepare your work area and the surface: It is recommended to use Gorilla epoxy In a well-ventilated area. Prepare the surface: to improve adhesion, roughen smooth surfaces before gluing. Then clean and dry all surfaces to be bonded. 2. Mixing Gorilla epoxy: remove the black cap. With tip pointing upward, cut or snap the end from tip of the syringes. With the tip still pointing upward, eliminate air and ensure even dispensing by slowly pushing the plunger until both the resin and the hardener are at the tip. Push the plunger to dispense even amounts of resin and hardener onto a clean, disposable, contained surface. Mix the two parts for about 20 seconds, until the mixture is uniform. 3. Application: after mixing is complete, apply Gorilla epoxy within 5 minutes. The epoxy mixture will continue to thicken and the bond strength will decrease the longer you wait to apply. 4. Clamping: to reach maximum bond strength, clamp project together and leave undisturbed. Important cure times: set: 5 minutes to apply and position handling: allow to cure for 30 minutes undisturbed (no weight or handling) final cure: allow 24 hours for load-bearing weight storage: to close, pull plunger slightly back. Wipe tip clean with dry cloth and align notch on tip and cap. Close tightly. Click on the Gorilla link at the top of this page to see more fine products from the Gorilla glue company.

• Strong, permanent, fast and gap-filling; great for multiple surface applications
• Best for tough repairs requiring a durable bond, gap-filling and solvent resistance
• Dries clear; ideal for clean, easy finishing
• 6 minute set; plenty of repositioning time for the perfect fit
• Easy-to-use syringe; separate barrels of resin and hardener keep epoxy from hardening, plus syringe dispenses evenly and includes a cap for multiple uses

User questions & answers

Question:	Will Gorilla glue work on hanging something on ceramic tile
Answer:	I have zero doubt that it will work. I would prep the surface of the tile with sandpaper or steel wool at the least.
Question:	Will this work to fix an axe head
Answer:	I used this to fix a maul head to the handle. It was slipping thru extended use and looked like it would come off soon. First sanded and cleaned the fiberglass handle with acetone to created a rough and clean surface. Then wiped the inside of the mall head with acetone. Mixed up a big batch since I didn't want to fall short of product once I started filling. Applied it liberally to the handle then slipped the head on and used the rest to fill in around any crevice left around the head until it was one pool of epoxy flush with the head top. Let it sit for a day then used. Been over a year and it has not had any sign of slipping and looks the same as when I first glued it on.
Question:	I need a clear epoxy to cover and protect a circuit i made in a small box mod i made. its for a small 4- 6 volt device. is this ok
Answer:	Probably YES is your answer with NO guarantees, since I have never used an epoxy to cover ANY type of circuits. I HAVE HOWEVER, used a SILICONE SEALANT (marine grade) also available through AMAZON, to cover AND seal electrical circuits on several watercraft I have owned over the years. ALL with great success. The beauty of the silicone is that it dries clear and can easily be removed while the epoxy dries to an amber hue and is almost impossible to remove. Once it dries, it's there forever. MY suggestion is use a marine grade (waterproof) silicone sealant. GOOD LUCK!
Question:	I'm thinking of using this on ceramic cookware. Is it heat resistant up to 500 degrees F
Answer:	MamaO - researched question - Do NOT use Gorilla epoxy on food ceramics. For other ceramics other than food, should be ok up to 180. From 200-500, epoxy will de-compose. / Look for food safe stuff only, but best to not repair your ceramic for food use. What you want is hard to find !

Product description

C-Tough is a two-part structural epoxy adhesive. The Toughness and flexibility of C-Tough allows it to be impact and shock resistant while being able to withstand vibration, contraction and expansion. C-Tough has tremendous grip to wood, metals, plastics, glass, masonry and fiberglass. C-Tough has an easy 1:1 mixing ratio and allows for a long working time with a fast cure rate.

• knife making and repair
• Boat and canoe building
• Assembling metal, plastic and wood parts
• Golf club repair
• Flexible and tough structural bonding

User questions & answers

Question:	Can you mix a pigment with it to dry White? Wanting to use it to fill some holes on center console of my boat. Thanks
Answer:	I have never tried that. It turns semi-transparence without adding anything.
Question:	Does it react with alcohol? I want to glue something that will be immersed into alcohol solution
Answer:	C-Tough is alcohol resistance after fully cured(72 hours). Hope this answers your question. Regards, CECCORP
Question:	How long is the working time
Answer:	30-40 minutes depending on room temperature
Question:	How many square feet of area to be bonded together will this 8.5oz kit cover, please
Answer:	Considering 0.5 mm to 1 mm thickness for the bond it can roughly cover around 4 to 2 sqft area. I hope this answers your question.

Product description

PC-Clear is a completely clear liquid epoxy. PC-Clear is formulated to remain clear during and after its curing time. PC-Clear is very durable and flexible making it unlike many liquid epoxies. If disguising a repair or the absence of color is needed, PC-Clear is your product of choice. PC-Clear demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. Note: PC-Clear will not bond to wax paper, Teflon, Polyethylene, and some other plastics. There are hundreds of plastics in thousands of combinations. Test a small area when in doubt.

Advisement: Please be aware that PC-Clear will get warm when it cures. How warm it gets depends largely on the amount of resin and hardener mixed. The greater the quantity, the greater the amount of heat generated and potential temperature.

Mix on a flat surface or using a static mixer. Use caution when applying to heat sensitive objects. Wear gloves and avoid getting on skin or eyes.

From the Manufacturer

PC-Products, celebrating 60 years of “Fixing Your Things”, with quality, reliable repair products. Repair solutions for just about anything that needs repair or what you can manage to break. From Concrete to Wood restoration and heavy duty permanent repairs, we have you covered.Yeah; We can fix that!

• Clear epoxy adhesive liquid bonds wood, metal, glass, ceramic, concrete, and fabric
• When mixed it turns opaque initially then clear to full cure to blend in with bonded material
• Continuous service temperature range from -20 to +200 degrees F
• Provides work time of approximately 4 minutes, cure time for function of 1 hour, and full cure time of 24 hours
• Forms tough bond for durability

User questions & answers

Question:	does this seal cracks in glass
Answer:	For 6 bottles
Question:	Is this for exterior use
Answer:	You have to squeeze the sides Good flow of water comes out
Question:	Each bottle is 16 ounces? So, the total amount of epoxy when mixed would be 32 ounces
Answer:	Only if you keep the screw top off and don't fully fill them (maybe only 1/2 to 2/3 full).
Question:	Is this epoxy "foam safe
Answer:	Contact Amazon. I'm sure they will replace it for you

Product features

PC Products PC-Clear Epoxy Adhesive Liquid

PC-Clear is a completely clear liquid epoxy. PC-Clear is formulated to remain clear during and after its curing time. PC-Clear is very durable and flexible making it unlike many liquid epoxies. If disguising a repair or the absence of color is needed, PC-Clear is your product of choice. PC-Clear demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. Note: PC-Clear will not bond to wax paper, Teflon, Polyethylene, and some other plastics. There are hundreds of plastics in thousands of combinations. Test a small area when in doubt.

Great for high detail fixes

PC Clear is excellent for repairs and projects that must be less visible such as art objects or collectibles.

Strong flexible and resilliant bond

Durable and flexible yet demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water.

Proudly made in the USA

All PC Products are made in the USA and shipped from Allentown, PA.

About PC Products

Protective Coating Company was founded and incorporated in 1954 by John (Jack) Long as a service company providing customers with a waterproofing product called 'Spraycrete'. Soon afterward, our signature product PC-7 paste epoxy was developed. This product put Protective Coating Co. on the map. Today, we make a full line of repair and wood restoration products. From wood repairs to concrete repairs and most repairs in between...We have you covered.

Now in its 3rd generation, Protective Coating Co. still maintains their small town philosophy and remains a family run company committed to manufacturing quality products. Every batch of mixed material is still hand tested to insure our high standard of quality. In each of our products you will find more than just a product that performs as intended, you will find a team that stands behind their products. From Concrete to Wood restoration and heavy duty permanent repairs, we have you covered.Yeah; We can fix that!

Product description

C-POXY 30 by CECCORP is a fast/mid setting 30 min general purpose structural-unfilled epoxy adhesive. It's water-proof, heat-resistance, non-yellowing, mixable with fillers (micro balloon, wood flour, organic fillers, bubble glass, and more), pigments, dyes to reinforce or create different viscosities including putty like viscosity. Great for forming and strengthening fillets or joints. Recommended for bonding metal, ceramics, stone, glass, concrete, wood, fiberglass and many plastics such as polyester, ABS and rigid PVC (not suitable for PTFE-PP-PE and rubbers).

• Direction of use: Part A and B need to be mixed thoroughly in the correct volume ratio for minimum 1 minute before use. Gel time of the mixed product is 20-40 minutes at room temperature. Parts requiring bonding should be assembled and kept close without any stress. Assembling is continued until full curing takes place. Excess of the product can be cleaned with Acetone or any solvent-based cleaner compatible with the substrates to bond.
• Works better than other epoxies for bonding brass, bronze, and glass.
• Perfect for countertop repairs and musical instrument manufacturing and repairs.
• Do not mix a large batch. Mixing a large batch can create heat (exothermic reaction) and reduce cure time.
• Shelf life: Minimum two years in unopened packaging at +5°C / +27°C.

User questions & answers

Question:	Is this product UV resistant? Any concerns using it to repair a surfboard
Answer:	Hi, There is no concern using this glue to repair a surfboard. Regarding UV resistant, UV may change the color of the glue to yellow but that is the only change and the glue still works properly. Regards, CECCORP
Question:	I would like to glue 2 marble shower rod holders to my marble shower wall. Will this have enough verticle hold
Answer:	Hello Dear, It will have enough vertical hold. Please make sure to properly clean both surfaces and leave it for 24 hours before applying any load to it. I hope this helps. Regards, CECCORP
Question:	I need to glue metal to pvc , will it be strong and last with this combo
Answer:	Only if you roughen up the PVC and metal surface. Wire brush or grinder. Epoxy is good at filling gaps. CA glue doesn't fill gaps but is strong and fast setting.
Question:	Will this be suitable for filling knot holes and cracks in wood slabs
Answer:	Works well for that purpose. May use a SMALL amount of stain to match if you wish. For rotten or structurally unstable wood, Smiths penetrating Epoxy works better.

Product description

Easy-to-use self-mixing dispenser and precision applicator. High-strength formula bonds wood, metal, tile, ceramic, glass, plastic and more. Final bond is high strength and weather-, water- and solvent-resistant. Sand able and paintable.

From the Manufacturer

For over 50 years, Loctite has provided customers with advanced adhesive and sealing solutions. Loctite Epoxy 5 Minute Instant Mix is a two-part adhesive consisting of an epoxy resin and a hardener. When mixed in equal volumes, the resin and hardener react to produce a tough, rigid, high strength bond, which starts to set in 5 minutes and reaches handling strength in 1 hour. The static mix nozzle delivers a uniform mixture of resin and hardener every time. It can be used as an adhesive for a wide range of materials or as versatile filler for gap bonding, surface repairs and laminating. Loctite Epoxy 5 Minute Instant Mix does not shrink and is resistant to water and most common solvents. It can be tinted with earth pigments, cement or sand for color matching and can be sanded and drilled. Our uncompromising level of quality and innovation is achieved through a strong commitment to research and development. This commitment to innovation, quality and reliability has truly earned Loctite the reputation of delivering "Trusted Performance. Proven Results".

• Easy-to-use self-mixing dispenser and precision applicator
• High-strength formula bonds wood, metal, tile, ceramic, glass, plastic and more
• Waterproof, sand able and paintable
• It can be used as an adhesive for a wide range of materials or as a versatile filler for gap bonding, surface repairs and laminating.
• Loctite Epoxy Instant Mix 5 Minute does not shrink and is resistant to water and most common solvents.
• The static mix nozzle delivers a uniform mixture of resin and hardener every time.
• It can be tinted with earth pigments, cement or sand for color matching and can be sanded and drilled.
• Recommended for bonding metal, glass, ceramic, wood, many rigid plastics, china, tile, fiberglass, concrete and stone.

User questions & answers

Question:	Can this be used to repair scratches in quartz countertops
Answer:	I wouldn't use it to repair quartz since it is a porous solid when it cures.
Question:	does the Marine Epoxy come in another color other than white. And are any of your other products suited for constant outdoor use
Answer:	Thank you for your question about Loctite Epoxy Five Minute Instant Mix. This product is not the Marine variation, however that is currently only available in white through us. For any other questions about product specifications feel free to reach us at 800-453-0349. Thanks and have a great day!
Question:	Can this be used multiple times or only once before it dries out or otherwise becomes unusable
Answer:	Two times with the supplied nozels. You can use it more than two times but must mix epoxy by hand and apply with tooth pick or other device
Question:	where can i get extra mixing tips
Answer:	I’ve had good success just squirting it onto some cardboard, mixing with a popsicle stick, then applying to surface.

Product features

5 Minute Instant Mix Epoxy

Product description

PC-Woody is an epoxy paste formulated to replace missing and rotted wood. It has structural strength greater than most wood. PC- Woody is a permanent wood repair for interior and exterior applications. This epoxy is made from real wood and has many characteristics of wood. PC-Woody formulation provides extended working time, for large and critical jobs, which allows the user time to reposition work or make changes. High "wet grab" or tack of PC-Woody makes overhead and sidewall work easy without drip or sag. PC- Woody demonstrates excellent resistance to all weather elements, mildew dry rot, UV light, fresh and salt water, and also chemicals present in pressure-treated wood. After cure paint, stain, drill, machine, sand, file, tap, or saw. Repair log homes, furniture, window and door sills and much more. Color (component a): Off white. Color (component b): Light brown. Color (mixed): Pine or tan. Work time (70 degree F): 30-40 Minutes. Tack free cure time: 90 Minutes. Cure for service: 24 Hours. Maximum cure: 7 Day. Gardner impact resistance: 100 In/lb. Elongation: 5-7 percent. Conduction (electric): Non conductive. Thermal shock: Excellent. Toxicity: Non toxic once cured. Heat range: -20 To 200 degree F. Tensile shear strength: 850 psi. Compressive yield: 2340 psi. Flexural strength: 1280 psi. Water absorption: 0.44 percent. Weight (specific gravity): 0.72 g/cm cube, 0.42 oz/in cube. Hardness shored: 50-55 (1wk). Heat deflection: 120 degree F.

From the Manufacturer

PC-Products, celebrating 60 years of “Fixing Your Things”, with quality, reliable repair products. Repair solutions for just about anything that needs repair or what you can manage to break. From Concrete to Wood restoration and heavy duty permanent repairs, we have you covered.Yeah; We can fix that!

• Two-part epoxy paste to replace missing or rotted wood is resistant to mildew, dry rot, UV light, and fresh and salt water
• Can be used in indoor and outdoor applications, with an application temperature range of 35 to 115 degrees F and a service temperature range of -20 to +200 degrees F
• High tack helps reduce drips and sags while hardening. PC-Woody part B must be mixed with PC-Woody part A in equal volumes. The PC-Woody part B will not cure by itself and must be removed and mixed properly. It is not recommended to mix PC-Woody in teaspoon size increments or smaller, simply because of the likelihood of an ‘off-ratio’ mix
• Provides work time of 30 to 40 minutes (at 70 degrees F) to allow for adjustments
• Can be painted, stained, and machined after fully cured
• High "wet grab" or tack of PC-Woody makes overhead and sidewall work easy without drip or sag
• Excellent resistance to all weather elements, mildew dry rot, UV light, fresh and salt water, and chemicals present in pressure-treated wood
• Note: PC-Woody will not bond to wax paper, Teflon, Polyethylene and some other plastics. Test a small area when in doubt

User questions & answers

Question:	Is this product ok to use on my porch floor where it gets lots of traffic
Answer:	If the rotted-out section is properly prepared (say, by removing all damaged wood and applying a couple of coats of wood petrifier to soak the adjacent area), then yes, the epoxy paste will be equally as strong as wood and should withstand traffic. Just filling in the rot hole without treating the edges where it binds will eventually result in the "plug" separating. Be sure to paint or eurathane, etc. the finished, sanded repair.
Question:	Is it possible to buy this product in white as the wood items I need to repair will be painted white afterwards
Answer:	It cures to a very light tan. When painting give the product a very light first coat of paint and then a 2nd after that dries.
Question:	the bottom of my sash is rotted, so how do I keep the epoxy in the hole
Answer:	Tape over the bottom if you have access to the bottom, but if not try plugging the bottom of the hole with putty or glazing compound
Question:	If I am using this to fill wood gaps in wood that is not rotted should I still use wood hardener first? How likely is this epoxy to come loose
Answer:	The petrifier can be used to harden rotted wood. You can also remove a lot of the rotted wood if that is possible given the project parameters. If you are filling a large void it is good idea to use some screws to act as rebar for the putty. You install the screws below the surface of the repair and make sure to drive them into good material. Then spread the putty into the hold around the screws when dry the putty will have wrapped around the screws almost like you "screwed" the putty to the surface. Make sure the screws are below the finished surface will allow the putty to hide the screws.

Product description

The strength and versatility you have come to expect from Gorilla Glue is now available in an easy to use, crystal clear, non-foaming formula. Clear Gorilla Glue is incredibly strong and is ideal for indoor and outdoor applications and bonds virtually everything.

• Crystal clear
• Non-foaming
• Water resistant
• Incredibly strong
• Easy to use

User questions & answers

Question:	I need to secure some metal screw bushings for a guitar bridge. With this bond or secure the metal bushings into the wood of the guitar
Answer:	Hello, Clear Gorilla Glue will work on metal and wood surfaces. For further assistance with your application, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact and reference case #269461. Thank you, The Gorilla Glue Company
Question:	Will this work to glue edges of linoleum in our camper
Answer:	Hello, Clear Gorilla Glue will work on linoleum. The application will need to be clamped for at least two hours. If we can be of further assistance, please contact our Consumer Affairs team at 800-966-3458 or the website listed on the back of the packaging and reference case #370123. Thank you, The Gorilla Glue Company
Question:	Is there a low viscosity version of this glue or can it be thinned. I want to adhere some tinted, translucent plastic film to glass. Thanks
Answer:	Hello, Clear Gorilla Glue cannot be thinned. If we can be of further assistance, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact and reference case #293416. Thank you, The Gorilla Glue Company
Question:	Will this work on a terracotta planter
Answer:	Hello, Clear Gorilla Glue will work on terracotta, however, it is water resistant and not waterproof. If we can be of further assistance with your application, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact and reference case #232709. Thank you, The Gorilla Glue Company

Product description

KwikWood is a hand-mixable epoxy putty, formulated to repair and rebuild wood. After mixing, it cures to the same density as wood and becomes an integral part of the repair. For use on exterior or interior applications, it contains no solvents, will not rot, shrink, crack or pull away. KwikWood has a 15-25 minute work life. After 60 minutes, it can be machined, drilled, tapped, sanded, filed and painted. Stronger than wood, KwikWood dries to a light tan color.

• J-B WELD KWIKWOOD: A hand mixable two part epoxy putty stick that is formulated to repair and rebuild wood. J-B Weld KwikWood is designed for all wood household DIY repairs!
• CURE AND SET TIME: After kneading the two part formula together by hand, KwikWood takes 15-25 minutes to set and cures in 1 hour. J-B Weld KwikWood set and cure color is a light tan.
• PRODUCT FEATURES AND STRENGTH: J-B Weld KwikWood has lap shear strength of 900 PSI. KwikWood will not shrink or rot and can be stained, molded, tapped, drilled, sanded and shaped.
• APPLICATIONS: Window/Door Hinge Repairs, Dry Rot Repairs, Gouges and cracks in furniture, knot hole repairs, gap fillers and more!
• DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.

User questions & answers

Question:	Will this product accept wood stain at all
Answer:	Yes, but to control the amount of pigment, I have always sealed the filler 1st, and matched the background color of the wood grain, sealed again, then added the actual wood color on top of the 2nd coat of sealer, then sealed again, painted in grain lines and sealed again. Sealer = lacquer, polyurethane, etc. Usually using a spray finish..
Question:	Can kwikwood be used for rotted wood repair? the window sill has rotted area with high moisture content.the product label mentions dry rot
Answer:	Yes, but dry rot has to be removed and wood needs to be dried out, for a good base for a stable application...also how large of an area is involved needs to be considered. If larger than 3"x3"×2" deep..I would considered a different filler, a bondo type for wood repair, available at most hardware stores, that's more spreadable...for larger holes.
Question:	can this be used to replace the corner of a wooden drawer that is broken off
Answer:	Absolutely. I used it to replace a few corners and patch nail holes
Question:	Once you open the package do you have to use it all at once or can you reseal it and save it for another day
Answer:	I used about 2/3's of a package. Resealed. Used about half of remaining a week later. Resealed. Still seems usable except portion I accidently put in contact. Is binary thick paste, like modeling clay. To activate, must kneed together with fingers quite a bit. Hardens in about 15 minutes. RH

Product features

Epoxy Putty

KwikWood is a hand-mixable epoxy putty, formulated to repair and rebuild wood. After mixing, it cures to the same density as wood and becomes an integral part of the repair. For use on exterior or interior applications, it contains no solvents, will not rot, shrink, crack or pull away. KwikWood has a 15-25 minute work life. After 60 minutes, it can be machined, drilled, tapped, sanded, filed and painted. Stronger than wood, KwikWood dries to a light tan color.

Additional Attributes

• KwikWood will not shrink or rot.
• KwikWood can absorb stain coloring (color should be tested and matched first).

Product description

The product that started it all. Original Gorilla Glue built a name for itself with its incredible, industrial holding power and versatility. The water activated polyurethane formula expands into materials to form an incredibly strong bond to virtually anything. Gorilla Glue is a 100% waterproof glue, safe for indoor and outdoor use and strong enough to stand up to the elements. Gorilla Glue’s your solution for almost any project or repair. Sand it, paint it, stain it. Simply stated, it’s the Toughest Glue on Planet Earth. Directions: 1. Prepare and Dampen the Surfaces: All surfaces must be clean, dust free and tight fitting. For shiny surfaces, such as metals, glass and some plastics, roughen up the material to give the glue something to bite into. Lightly dampen one surface with water. We recommend using a damp cloth or spraying with water. Do not saturate the surface. For dense hardwoods, lightly dampen both surfaces prior to gluing. 2. Evenly Apply Gorilla Glue Onto the Dry Surface. Carefully apply onto the dry surface. Do not over apply. We recommend wearing gloves or spreading the glue with a disposable brush. 3. Clamp the Two Surfaces Together Tightly. Make sure the clamping pressure is distributed evenly across the surface. Or, if you don’t have a clamp, use heavy objects or Gorilla Tape to achieve the appropriate clamping pressure. Clamp objects for 1–2 hours. For best results, allow 24 hours to cure. 4. Clean up: If you need to remove any uncured “squeeze out” or wet glue, we recommend wiping with a dry cloth or using a standard paint thinner. Once the glue is dry, it is best removed mechanically: Try sanding, chiseling, scraping or picking. 5. Storage Tips: After each use, wipe the bottle’s lid and nozzle clean with a dry cloth. While still squeezing, tightly replace the cap and then store in a cool, dry place. You should expect a year shelf life. Click on the Gorilla link at the top of this page to see more fine products from the Gorilla Glue Company.

• Imported
• Incredibly strong and versatile; The leading multi-purpose waterproof glue
• Best for tough repairs on dissimilar surfaces, both indoors and out
• 100% Waterproof; Doesn't break down when exposed to outdoor elements
• Versatile; Easily bonds wood, stone, metal, ceramic, foam, glass, concrete and much more!
• Incredibly Strong: Expands 3 times into the materials to form an incredibly strong bond

User questions & answers

Question:	Has anyone glued marble
Answer:	YUP works good.
Question:	Is this clear colored when dried
Answer:	No it does not drie clear, It dries with a beige color. It also expands a good bit after application so use cautiously.
Question:	is gorilla glue food safe
Answer:	can gorilla glue be used to repair food dishes
Question:	Will this glue work on shoe insoles to prevent slipping
Answer:	It would likely hold well, but dry to lumpy for comfort for insoles. I've used it to glue soles on slippers which works well, and holds for a long time.Used shoe glue in the past for outer soles, and found it worthless, which is why I tried Gorlla this time.

Product description

Devcon Epoxy 20945 9 OZ Devcon Epoxy is a 5 Minute Fast Drying Epoxy. The package contains 4 1/2 OZ Epoxy and 4 1/2 OZ Epoxy Hardener. The epoxy is a high strength glue with 1500psi and dries clear. The all purpose epoxy can be used for Metals, Wood, Glass, Ceramics, China and Concrete. The epoxy is resistant to many chemicals.

• Devcon 9oz 5 Minute Epoxy 1500lb Waterproof Glue 4.5oz
• Epoxy High Strength Bonding 1500 psi
• Sets in 5 Minutes
• Resistant to man Chemicals
• All Purpose Epoxy for Metals, Wood, Glass, Ceramics, China and Concrete

User questions & answers

Question:	Will this work on PVC pipe
Answer:	Yep 16+16=32
Question:	What is the shelf life on this product
Answer:	If you follow good application methods things are fine. The epoxy and resin are a skin irritant. Do not inhale particles if sanding down after curing. Use a mask. You can view the MSDS at www.pcepoxy.com.
Question:	Will this glue magnetic drawer catches to plastic drawers
Answer:	This item is recycle number 4.
Question:	Do I have 5 minutes to get the broken pieces of a ceramic plate lined up properly before it sets
Answer:	Standard cycling water bottle.

Product description

PC Products PC-Clear Epoxy Adhesive Liquid . PC-Clear is a completely clear liquid epoxy. PC-Clear is formulated to remain clear during and after its curing time. PC-Clear is very durable and flexible making it unlike many liquid epoxies. If disguising a repair or the absence of color is needed, PC-Clear is your product of choice. PC-Clear demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. Note: PC-Clear will not bond to wax paper, Teflon, Polyethylene, and some other plastics. There are hundreds of plastics in thousands of combinations. Test a small area when in doubt.

From the Manufacturer

PC-Products, celebrating 60 years of “Fixing Your Things”, with quality, reliable repair products. Repair solutions for just about anything that needs repair or what you can manage to break. From Concrete to Wood restoration and heavy duty permanent repairs, we have you covered.Yeah; We can fix that!

• Clear epoxy adhesive liquid bonds wood, metal, glass, ceramic, concrete, and fabric
• When mixed it turns opaque initially then clear to full cure to blend in with bonded material
• Continuous service temperature range from -20 to +200 degrees F
• Provides work time of approximately 4 minutes, cure time for function of 1 hour, and full cure time of 24 hours
• Forms tough bond for durability

User questions & answers

Question:	Is it FDA approved
Answer:	It does not have an FDA approval. But I wont be eating this it does bond well on plastics and is solid, washable and clear. Held the item I used it on very well.
Question:	Does this glue settle to a smooth, shiny finish
Answer:	Smooth, shiny, tacky, &tough.
Question:	Will it repair broken Indian pottery
Answer:	This worked very well to repair some handmade ceramic pottery of mine. I can hardly see where the crack was.
Question:	can this be used to glue a sheet of stainless steel to wood? thanks
Answer:	As the product details say, "used to bond WOOD, METAL, glass, ceramic, concrete, and fabric."

Product features

PC Products PC-Clear Epoxy Adhesive Liquid

PC-Clear is a completely clear liquid epoxy. PC-Clear is formulated to remain clear during and after its curing time. PC-Clear is very durable and flexible making it unlike many liquid epoxies. If disguising a repair or the absence of color is needed, PC-Clear is your product of choice. PC-Clear demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. Note: PC-Clear will not bond to wax paper, Teflon, Polyethylene, and some other plastics. There are hundreds of plastics in thousands of combinations. Test a small area when in doubt.

Great for high detail fixes

PC Clear is excellent for repairs and projects that must be less visible such as art objects or collectibles.

Strong flexible and resilliant bond

Durable and flexible yet demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water.

Proudly made in the USA

All PC Products are made in the USA and shipped from Allentown, PA.

About PC Products

Protective Coating Company was founded and incorporated in 1954 by John (Jack) Long as a service company providing customers with a waterproofing product called 'Spraycrete'. Soon afterward, our signature product PC-7 paste epoxy was developed. This product put Protective Coating Co. on the map. Today, we make a full line of repair and wood restoration products. From wood repairs to concrete repairs and most repairs in between...We have you covered.

Now in its 3rd generation, Protective Coating Co. still maintains their small town philosophy and remains a family run company committed to manufacturing quality products. Every batch of mixed material is still hand tested to insure our high standard of quality. In each of our products you will find more than just a product that performs as intended, you will find a team that stands behind their products. From Concrete to Wood restoration and heavy duty permanent repairs, we have you covered.Yeah; We can fix that!

Product description

Gorilla Super Glue Gel is an easy-to-use, thicker and more controlled formula great for multiple surfaces and vertical applications.

• GEL FORMULA: No run control gel formula that is great for use on vertical surfaces
• ANTI CLOG CAP: Helps keep the glue from drying out. It's Gorilla tough use after use
• IMPACT TOUGH: Specially formulated for increased impact resistance and strength.
• FAST-SETTING: Dries in 10-45 seconds. No clamping required
• VERSATILE: Bonds plastic, wood, metal, ceramic, rubber, leather, paper and more. Not recommended for use on polyethylene or polypropylene plastic or similar materials
• Non-greasy

User questions & answers

Question:	Can this be used to repair a car's plastic intake manifold (nylon polymer) ? Is it compatible
Answer:	Probably. I have narrower feet and they fit me.
Question:	EPO Foam safe? I have several RC models that are made from EPO and EPP Foam. Would like a quick to repair glue.... Thanks
Answer:	Probably, the soles are a soft smooth suede like material. Concrete will tear them up fast, wood would be a much better surface for moonwalking.
Question:	Will it glue leather to metal
Answer:	They fit just perfectly. Im 9.5 and i just order 8.5. I recommend that you choose 1 size less or 1/2 less for your perfect size
Question:	What's the difference between their super glue gel and their super glue
Answer:	They are not. Both shoes have sliding pad on them, so it perfect for both right and left handed bowlers. I have 3 pair of them and they're the best one for your money unless you willing to spend more money on the Dexter sst series.