12 best coffee water tank repair glue

Product description

This 80-Watt welding iron heats up quickly to a maximum temperature of 525 degrees F and can easily handle repairs on TPO, TEO and PP materials, which are often used in car bumpers. The welding iron comes with a standard multipurpose welding iron, sand paper, 2 stainless steel wire mesh, 20 plastic welding rods, 2 welder tips, and wire brush.

• Repair TPO, TEO, and PP Materials - Airless Plastic Welder (120V, 60Hz Max) heats up to 525°F. in Just a few mins
• Specially Engineered Plastic Welding Rods (included) Bond to Various Surfaces: Car Bumper, Dashboard, Kayak, Canoe, Fuel Tank
• DIY Welder Kit Includes Sandpaper, 20 Plastic Rods, 2 Welder Tips, 2 Reinforcing Stainless Steel Wire Mesh, 1 Iron Stand, 1 Wire Brush
• Great Savings for a Quick DIY Auto or Plumbing Plastic Repair and Arts and Crafts Projects

User questions & answers

Question:	Will it work on ABS
Answer:	Just match the composition, ie., ABS rods for ABS, HDPE for HDPE, etc.
Question:	Can you fix a rc car body
Answer:	Yes you can.
Question:	Would you recommend this kit for fixing a plastic/poly wheelbarrow tub that has cracked
Answer:	Definitely! As mentioned above, this kit comes equipped with wire mesh to imbed into the poly wheelbarrow and specially formulated rods to work with most any plastic. Make sure to sand a grove for the rods to fill using 40-80 grit sand paper. This will also help the rods stick to the wheelbarrow for better adhesion. Any further questions don't hesitate to reach out to us.
Question:	will it work with hdpe
Answer:	Are you asking if you can use the provided plastic rods to repair HDPE? As far as I know, yes. I was told you can weld low-density polyethyl­ene (LDPE) welding rod to high-density polyethylene (HDPE) sheet but not the other way around. If you purchase the product and it didn’t work on your HDPE surface please call us at 310-773-0735. But, please be reminded this welding kit (80w) is mainly for relatively quick repair jobs for cracks on a car bumper or tears on a Kayak. (You can achieve stronger bond by using the wire mesh included. You can easily search and find Youtube videos on how to do this.) For bigger and longer projects, we suggest you go with a $200 or more expensive higher wattage welder.

Product description

Repair ripped or torn waders, wetsuits, inflatables, boots and all your outdoor gear with Aquaseal FD. It’s a flexible, durable adhesive that’s waterproof and bonds to all types of outdoor fabrics. This clear, rubber glue cures in 8-12 hours and is ideal for fixing pinhole leaks and tears on watersports and fishing gear. As a multipurpose fabric repair adhesive that’s waterproof, it keeps you dry and offers excellent abrasion resistance to keep gear protected from scrapes and scratches. When you rip your waders or tear your wetsuit, fix it with Aquaseal FD.

• Fix rips and tears permanently on waders, wetsuits, PVC inflatables, muck boots, and more with this waterproof and flexible adhesive
• Use it as a fabric and vinyl repair adhesive to patch holes and seal leaks; cures in 8-12 hours to a flexible urethane rubber (available in 0.75 oz or 8 oz tube)
• Apply this clear glue to neoprene, nylon, canvas, leather, rubber, and GORE-TEX fabric; creates a water-tight seal that won’t peel or crack over time
• Resist abrasions and scratches with a repair that is unaffected by extreme temperatures
• Packaging may vary

User questions & answers

Question:	Will this work on a bicycle inner tube made of butyl
Answer:	Someone said that it might not hold up to the pressure of being used on an inner-tube. Actually, as long as you only inflate it while it's in the bicycle tire when you inflate it, the pressure helps push the patch tighter into the inner tube. My best guess is that it should work as patch glue, but use it only if you already have it...and nothing else. Otherwise you should just get a cheap tire repair kit that someone in the bike shop recommends for your tire.
Question:	What is the shelf-life for aquaseal
Answer:	Once the tube has been opened it will last anywhere from 2 months to 12 months depending on storage and the amount of moisture present. It is recommended to store in a low moisture area to increase shelf life.
Question:	How is this different from the normal AquaSeal
Answer:	This product is normal Aquaseal. It is available from our store in tubes of 0.75oz or 8oz.
Question:	I need to bond a large patch of pvc plastic over a big hole in my pvc plastic inflatable kayak. Will this bond pvc to pvc
Answer:	Hi Audrey,Not sure about the PVC. The packaging says nothing about it. I would think it would probably work, but you might consider contact cement as well.

Product description

J-B Weld Plastic Weld Epoxy Putty Plastic Weld is a hand-mixable, fast-setting epoxy putty that forms a durable bond to most major plastic types. After mixing, it forms a polymer compound that can be molded or used to build up and repair just about anything made from plastic. When cured, it can be sawed, drilled, carved, sanded and painted. Plastic Weld has a 20-25 minute work life; functional cure occurs in 2-3 hours. Plastic Weld cures to an off-white color, is rated at a tensile strength of 350 PSI. Does not adhere to polyethylene, polypropylene or some other plastics. Test for adhesion first. Use on: AutomotiveCeramicFiberglassPlastic/Composite/PVCAnd more Instructions 1. Cut: Remove required amount of putty. 2. Mix: Thoroughly knead putty with fingers to a uniform color. 3. Apply: Press putty firmly to the surface to be repaired. J-B Weld is proudly made in the USA

• J-B WELD PLASTICWELD: A hand mixable two part epoxy putty stick that is formulated to repair and rebuild various plastic compounds and surfaces. J-B Weld PlasticWeld is designed for DIY plastic repairs on ABS, PVC & CPVC pipes and plastics, auto bumpers and more! PlasticWeld is certified by the NSF and is safe for contact with potable water.
• CURE AND SET TIME: After kneading the two part formula together by hand, PlasticWeld takes 25 minutes to set and cures in 3 hours. J-B Weld PlasticWeld set and cure color is off white.
• PRODUCT FEATURES AND STRENGTH: J-B Weld PlasticWeld has lap shear strength of 600 PSI. PlasticWeld can withstand continuous temperatures up to 250oF (121oC) and intermittent temperatures up to 300oF (148oC) when fully cured. PlasticWeld does not shrink and can be molded, shaped, sanded, drilled and cut.
• APPLICATIONS: ABS, PVC & CPVC pipes and plastics, auto bumpers and trim, vinyl surfaces and siding, marine repairs & fiberglass parts, plastic water tanks, and plumbing.
• DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.
• Repair and rebuild any rigid and semi-flexible plastic including ABS, PVC and CPVC
• Bonds instantly

User questions & answers

Question:	Will this product repair broken plastic boat windshield inviisibly
Answer:	will this product repair a broken plastic door handle
Question:	Can it be used more than once, or is thrown away after one use
Answer:	Comes with a resealable cap, I opened mine at least two weeks ago and have still been able to use it (also used on multiple projects during those weeks). Just be careful to replace the cap in the same holes you removed it from or you will mix the two components and seal the lid.
Question:	Will it seal a PVC pipe that has a 1 inch slit? Must hold 75lbs of water press. Would put a rubber patch & 2 pipe clamps over it
Answer:	Yes, it is awesome! I've used it for years! It should work great!!
Question:	Is this product good for the broken plastic frame of eyeglasses? The eyeglasses is broken on the temple leg
Answer:	As an optician for over 30 years, sadly, nothing I've found short of a 2 part epoxy/resin will work...but only .temporarily. plus you'll probably get it everywhere including the lenses. I suggest visiting your local optician. I have tons of discontinued frames and can usually hand-edge the lenses if its a close fit . BTW, its the same with so-called scratch removers for eyeglass lenses:snake oil. hope this helps... John shameless plug follows: glassescontacts.com or FB.

Product features

Epoxy Putty

PlasticWeld is a hand-mixable, fast-setting epoxy putty that forms a durable bond to most major plastic types. *After mixing, it forms a polymer compound that can be molded or used to build up and repair just about anything made from plastic. When cured, it can be sawed, drilled, carved, sanded and painted. PlasticWeld has a 20-25 minute work life; functional cure occurs in 2-3 hours. PlasticWeld cures to an off-white color, is rated at a lap shear strength of 600 PSI. Does not adhere to polyethylene, polypropylene, or some other plastics.

Additional Attributes

• PlasticWeld NSF Certified - Safe for contact with potable water.
• PlasticWeld can resist continuous temperatures of 250°F (121°C) and intermittent temperatures of 300°F (149°C).

Product description

Tank Weld is hand-mixable, steel-reinforced, non-rusting epoxy putty that quickly repairs or rebuilds anything made of metal. After mixing, it forms an industrial-strength polymer compound that can be molded into shapes or used to build up, patch and repair steel components. Tank Weld sets in 5 minutes and after 60 minutes, can be drilled, tapped, machined, ground, filed and painted. Auto Weld cures to a dark grey color, is rated at a tensile strength of 900 PSI and will withstand temperatures up to 300 degrees F.

• J-B WELD TANKWELD: A hand mixable, steel reinforced two part epoxy putty stick that is formulated to repair and rebuild various holding tanks. J-B Weld TankWeld is chemical resistant against petroleum, hydraulic fluids and many other harsh chemicals once fully cured. TankWeld is certified by the NSF and is safe for contact with potable water.
• CURE AND SET TIME: After kneading the two part formula together by hand, it takes 5 minutes to set and cures in 1 hour. J-B Weld TankWeld set and cure color is dark grey.
• PRODUCT FEATURES AND STRENGTH: J-B Weld TankWeld has lap shear strength of 900 PSI. TankWeld can be molded, shaped, sanded, drilled and tapped.
• MAJOR USES: Fuel tanks, metal radiators, metal fuel or chemical tanks, metal housings and stripped threads. Surface applications include: iron, stainless steel, copper, brass, aluminum, and bronze.
• DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.

User questions & answers

Question:	Can i use it on air compressor tank (high pressure) ? Thanks
Answer:	I believe it does but it’s not all bleach. It cleaned my seats better then they have been since it was new.
Question:	Will a magnet stick to the cured epoxy
Answer:	Yes. Standard light bulb socket.
Question:	Does the gas tank have to be completely empty and dry? I have a tiny hole in the bottom of a metal gas tank
Answer:	Yes, includes the fuses
Question:	Will it bind to plastic? The top of my fuel pump housing has a small chip, and its now leaking fumes. How well will this patch up the plastic housing
Answer:	No You would need a c7 single bulb cord.

Product features

Epoxy Putty

TankWeld is a hand-mixable, steel-reinforced, non-rusting epoxy putty that quickly repairs or rebuilds anything made of metal. After mixing, it forms an industrial-strength polymer compound that can be molded into shapes or used to build up, patch and repair steel components. TankWeld sents in 5 minutes and after 60 minutes can be drilled, tapped, machined, ground, filed and painted. TankWeld cures to a dark grey color, is rated lap shear strength of 900 PSI and will withstand temperatures up too 300°F.

Additional Attributes

• Chemical resistant against petroleum, hydraulic fluid, and many other harsh chemicals when fully cured.
• NSF Certified - Safe for contact with potable water.
• Can resist continuous temperatures of 300°F (149°C) and intermittant temperatures of 450°F (232°C).

Product description

908570 3oz Features: -Adhesive sealant. -Flexible. -Waterproof. -Clear. Product Type: -Silicone Sealants. Dimensions: Overall Height - Top to Bottom: -3. 81 Inches. Overall Width - Side to Side: -8 Inches. Overall Depth - Front to Back: -1. 25 Inches. Overall Product Weight: -0. 24 Pounds.

From the Manufacturer

For over 50 years, Loctite has provided customers with advanced adhesive and sealing solutions. Loctite Clear Silicone is a multipurpose adhesive and sealant which creates a waterproof, protective seal that is ideal for metal, glass, rubber, tile and porcelain. It is designed to be used indoors and outdoors to repair everything from electrical connections to seams on boots to stop leaks in wet weather. Loctite Clear Silicone can be used to bond or repair saltwater or freshwater aquariums. Our uncompromising level of quality and innovation is achieved through a strong commitment to research and development. This commitment to innovation, quality and reliability has truly earned Loctite the reputation of delivering "Trusted Performance. Proven Results".

• Use for sealing or repairing door frames, windows, vents, toys, appliances, gaskets, weather-stripping, outside of fireplace doors, shoes and boots
• Bonds ABS, glass, ceramic, porcelain, wood, aluminum, stainless steel, cultured marble, fiberglass, granite, vinyl tile, some rubbers and plastics
• Aquarium safe
• No cracking, peeling or shrinking
• 2. 7 oz.

User questions & answers

Question:	Need to seal 3 cracks on top glass panel of aquarium that i plan to use as a terrarium.is it visible when it dries?don't want to see/feel any residue
Answer:	It may not be significantly visible, but it will not hide surface cracks of clear glass. Any residue can be cleanly removed on the surface with a razor blade. Whether or not it can be felt depends on the gap width. The number of cracks does not matter, but the type of crack does, and that was not described.
Question:	Can this be used instead of grout for ceramic tile installed outdoors, under a roof but exposed to weather, in Florida. Is it totally clear
Answer:	It is clear, and I doubt it would hold up under the weather as it doesn’t bond water tight to smooth surfaces. It’s easy to peel off most surfaces.
Question:	My sunroof is leaking in my car. can i use this to seal the sunroof shut? i don't need it to open but i do need it to stop leaking
Answer:	Lesley, I have used this product for years and believe me, it works. Yes, I think you could use this to seal your sunroof, but you might have a tough time getting it open, that is if you decide to do so. Use it as it works. JB
Question:	Is this 100% Silicone
Answer:	Yes

Product features

Clear Silicone Waterproof Sealant

Loctite Clear Silicone Waterproof Sealant is a multipurpose adhesive and sealant which creates a waterproof, protective seal that is ideal for metal, glass, rubber, tile and porcelain. It is designed to be used indoors and outdoors to repair everything from electrical connections to seams on boots to stop leaks in wet weather. Loctite Clear Silicone Waterproof Sealant can be used to bond or repair saltwater or freshwater aquariums.

Recommended For:

Loctite Clear Silicone Waterproof Sealant can be used for bonding ABS, glass, ceramic, porcelain, wood, aluminum, stainless steel, cultured marble, fiberglass, granite, vinyl tile, some rubbers and plastics.

Use for sealing or repairing door frames, windows, vents, toys, appliances, gaskets, weather-stripping, outside of fireplace doors, shoes and boots.

Limitations:

Preparation

Use between -35°F (-37°C) and 140°F (60°C). Protect work area. Surfaces must be clean, dry and free of old caulk, grease, dust and other contaminants. Note: Paint will not adhere to silicone. If desired, paint items prior to gluing. Remove cap. Puncture inner seal with other side of cap. Attach nozzle and cut to desired bead size (3 oz. tube only).

Product description

Tank Repair Kit, Color White, 2 Oz Container Size, Mixing Ratio 1 to 1, Temp. Range 500 F, Application Time 5 Minutes, Full Cure 1 Hour, Shear Strength 740 PSI, Application For Repairing and Bonding Heavy Duty, Automotive, Home, Industrial, Farm and Marine Situations, Includes 2 Oz Cement, Saddle Soap, Alcohol Swab Pad, Screen and Sandpaper

• Manufacturer: BLUE MAGIC
• Country of manufacture: United States
• Part number: 6522KTRI
• Included components: Unit, Instruction Guide

User questions & answers

Question:	Will this work on pe plastic fresh water tank
Answer:	Yes
Question:	Will this seal a crack on the plastic top of my tank mounted fuel pump
Answer:	I sprayed this on my vinyl seats and the mildew disappeared before my eyes without scrubbing. Then I sprayed it on the fiberglass on my older boat that I was considering painting because I could never get those dark streaks out. Again, the stains disappeared Unbelievable
Question:	Can I use this on a cracked radiator it’s only a small crack in the plastic right now I have a bit of jb weld plastic glue on it
Answer:	Absolutely. This is the best product I have ever used.
Question:	Is this stuff strictly used for Plastic and not metal
Answer:	I have no idea about convertible tops, but it worked great on boat seats

Product features

QuikSteel Tank Repair Kits - MIXES LIKE PUTTY ~ BONDS LIKE EPOXY!

Includes everything needed to repair larger leaks. Impervious to gasoline, diesel fuel, oil, automotive fluids, water, coolant, and Solvents. Can be drilled, tapped, filed, machined, sanded & painted. Available for Metal and Plastic repair.

EASY TO USE ~ MAKE PERMANENT REPAIRS ~ HARDENS LIKE STEEL

STRONGER

• Strength 5,950 PSI
• 500°F/260°C Resistant
• Bond Holds to -90°F/-68°C

QUICKER

• Set time – 5 Minutes
• Full Cure in 1 Hour

BETTER

• Set up under Water
• Plastic Tank Repair Kit Cures Color Off White
• Metal Tank Repair Kit Cures Color Gray

Product description

WaterWeld will plug or seal leaks and patch holes and cracks in almost anything. Ideal for repairing plumbing, fuel tanks, tub and shower, drains, pool and spa, boats and potable water tanks; setup occurs even under water. After curing, it can be drilled, tapped, filed, sanded and painted. WaterWeld has a set time of 15-25 minutes and sets hard in one hour. WaterWeld cures to an off-white color, is rated at a tensile strength of 900 PSI and will withstand temperatures up to 300ºF.

• J-B WELD WATERWELD: A hand mixable two part epoxy putty stick, that can cure under water and is ideal for repairing plumbing, fuel tanks, tubs and showers, drains, pool and spa, boats & potable water tanks and more! J-B Weld WaterWeld is certified by the NSF and is safe for contact with potable water.
• CURE AND SET TIME: After kneading the two part formula together by hand, WaterWeld takes 25 minutes to set and cures in 1 hour. J-B Weld WaterWeld set and cure color is off white.
• PRODUCT FEATURES AND STRENGTH: J-B Weld WaterWeld has lap shear strength of 1300 PSI, can withstand continuous temperatures up to 300F (149C) and intermittent temperatures of 350F (176 degrees Celsius) and is chemical resistant against petroleum, hydraulic fluids and other chemicals when fully cured.
• SURFACE APPLICATIONS: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass and Plastic & PVC.
• DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.

User questions & answers

Question:	Will it stick to something already wet
Answer:	Yes it will work on the silicon caulking. Spray on to the areas, I wait about 3-4 minutes and then wash off thoroughly. During the use I recommend to have a well ventilated area. (windows open and a fan blowing air out)
Question:	Can I use it to fix a pin hole in my gas tank? Do I have to drain my gas tank to do the repair
Answer:	Choose gel to control where the product was applied, allowed it soak in.
Question:	does it work to fix pool leaks
Answer:	Starbrite Mildew Stain Remover 1/3 the price at Walmart worked wonders on my boat seats
Question:	bathtub
Answer:	I don’t see why not. I have used it on several things from vehicles, boats and used it on the rubber around my boat windshield. I have also Used it on upholstery and haven’t had any problems with Discoloring, fading or dry rotting. So it should be just fine for a washing machine door gasket.

Product features

Epoxy Putty

WaterWeld will plug or seal leaks and patch holes and cracks in almost anything. Ideal for repairing plumbing, fuel tanks, tub and shower, drains, pool and spa, boats and potable water tanks; setup occurs even under water. After curing, it can be drilled, tapped, filed, sanded and painted. WaterWeld has a set time of 15-25 minutes and sets hard in one hour. WaterWeld cures to an off-white color, is rated at a tensile strength of 1300 PSI and will withstand temperatures up to 300ºF.

Additional Attributes

• WaterWeld can withstand continuous temperatures of 300oF/149oC and intermittent temperatures of 350°F/177°C.
• WaterWeld is waterproof, petroleum, chemical and acid resistant once fully cured!
• WaterWeld can set and cure underwater!
• WaterWeld is NSF certified and is safe for contact with potable water.
• Surface Applications: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze and Plastic & PVC and more!

Product description

The Versachem Heavy Duty Fuel Tank Repair Kit permanently repairs gasoline and diesel fuel tank leaks in less than 20 minutes. Use it to repair pinholes, rust-outs, hairline cracks and holes up to 1/2" in diameter. Resistant to water, gasoline, diesel and kerosene. No draining and no welding required. Have the repair ready before mixing the hardener and resin together, so that you can begin repair as soon as the pouch contents are thoroughly mixed. Heat is generated while the epoxy mixture cures. Works best on metal and plastic tanks, fuel tanks, and oil pans. Tensile strength: 1500 PSI; temperature range: 40F to 200F.

• Permanently repairs gasoline and diesel fuel tank leaks
• Repairs leaks in less than 20 minutes; no draining or welding required
• Chemical solvent resistance to gasoline, diesel and kerosene
• Temperature Range: 40°F to 200°F
• Suggested Applications: Repair pinholes, rust-outs, hairline cracks and holes up to 1/2" in diameter

User questions & answers

Question:	Can i seal a 275 oil tank with oil in it after a delivery
Answer:	If you encounter quality problems, you may be able to contact the manufacturer, after all, they admit that it will be replaced for free within one year.
Question:	it says it will seal tanks but what about water heater tanks? heat is a big factor
Answer:	Yes it works. But you need to test the color fastness on a small area, like with ONE drop of the stuff, or it will turn black to light tan. BEWARE. Do not get ANY on any sewed fabric connections. This stuff eats right thru thread, and all sewn connections will break down and pop open. REAL destructive stuff....
Question:	Will this work on an aluminum tank
Answer:	I used this product and didn’t smell bleach . It worked very well and I would recommend it b cause it did what she t said it would do . Great cleaning product for boat mildew and mold .
Question:	can be applied with the tank full
Answer:	Yes. You could treat the whole pontoon. Marine 31 is the best product I've ever found.

Product features

Versachem 90180 Heavy-Duty Fuel Tank Repair Kit - 30 Grams

This complete repair kit permanently repairs gasoline and diesel fuel tank leaks in less than 20 minutes. Use it to repair pinholes, rust-outs, hairline cracks and holes up to 1/2" in diameter. No draining and no welding required.

• Works Best On: Metal tank, plastic tank, fuel tank, oil pan
• Tensile Strength: 1500 psi
• Color: Gray
• Water Resistant
• Set Time: 8-10 Minutes
• Cure Time: 1 Hour
• Temperature Range: 40˚F to 200˚F
• Chemical Solvent Resistance to gasoline, diesel and kerosene

Product description

Type: Liquid Glue



Material：Transparent Semi-Fluid



Color：Transparent



Capacity: 25ML



Weight：About 25g



Packing Included: 2 * 25ml B7000 Glues



 ★B-7000 is a special environmental protection and other industries bonding glue crafts, compared with other adhesives, B-7000 pungent odor but also tiny FRESH fragrance;  having a high elastic film soft, anti-vibration and waterproof.



★B-7000 paste adhesive can be used on metals, glass, ceramics, stone, bamboo wood, cloth, leather, PVC, ABS, nylon, sponge, film, textiles, electronic components, plastics, rubber, fiber class,sheet, cell phone stickers border, LCD screen, in the box, and other materials, and has a very good paste properties.



If you have any problem, pls feel free to contact us, thanks！



PS:The glue may leak out because the tube squeezed,please contact our customer service soon,we will send a new replacement for free,We have improved the packing quality,thank you for your understanding and support.

• ★Using a needle design, can be opened after use, won't get gagging..Allows Small Adhesive drops for fine, Precise , Controlled and no mess Applications.
• ★Multi Purpose,Able to permanently bond various materials.Suited for Smart Phone,Jewelry,Electronic Components,Toys, Metal, Glass, Rubber, Fiber, Paper, Ceramics, Wood, Cloth, Textile, Nylon, PVC, Leather and other materials.
• ★Impact resistance: Very high elasticity, can be stretched to its own length of 900% will not break, effectively bonding with the expansion of the material with the surface, improve the durability of the load bearing structure.
• ★Sealing characteristics: sealed and isolated gas, liquid, air flow, in the underwater environment with plastic long-term to maintain excellent bonding strength.
• ★Surface dry time:about 6 minutes.

User questions & answers

Question:	Can I use this to glue glass to wood
Answer:	It could possibly work if you follow the instructions on the tube very carefully, depending on how much stress is placed on the joined area(s).
Question:	Do these have the precision metal tip for better accuracy
Answer:	It has a small tip yes.
Question:	Does this work to apply Rhinestones on acrylic nails
Answer:	Well thats not what i used it for i had bought it to replace a phone screen But i know for sure it didn't work for that that well because after a week or so the screen started to lift
Question:	Will this glue Glass to glass
Answer:	This is a knock off glue and isn’t worth purchasing.
Question:	Does this glue dry flexible
Answer:	No. Our glue with flexible bond is Fabric & Paper Glue.
Question:	What is the viscosity of the glue e.g. water like, thick goo, or something in-between. I need to use it in small crack and want it to flow freely
Answer:	E7502 is watery kind of glue, should run and fill the space for you but if the crack is too small, the air sometimes will stop the glue from dropping in, you may have to use some kind of tool to get it in.
Question:	Would this be safe to glue broken pieces together on a ceramic pan
Answer:	Elmer's ProBond Advanced was designed specifically for bonding porous surfaces, such as wood, concrete and drywall, to non-porous surfaces, such as metal, glass and ceramic. While this glue is AP Certified, we do not recommend using it on areas of items that may come in contact with food or the mouth. We encourage you to be safe and only use products as advised.
Question:	How long does it take to dry
Answer:	I live in Hilo, Hawaii. Rains almost every day, on days with little rain and low humidity, dries to the touch in about 10 - 15 minutes. Days with pouring rain seams to always be dry to the touch in about a half an hour. This goes on grey and dries clear. Total clear takes about 6 - 12 hours. I would like to add this is the best all propose glue I found. Has worked GREAT on everything I have tried it on.

Product description

Easy-to-use self-mixing dispenser and precision applicator. High-strength formula bonds wood, metal, tile, ceramic, glass, plastic and more. Final bond is high strength and weather-, water- and solvent-resistant. Sand able and paintable.

From the Manufacturer

For over 50 years, Loctite has provided customers with advanced adhesive and sealing solutions. Loctite Epoxy 5 Minute Instant Mix is a two-part adhesive consisting of an epoxy resin and a hardener. When mixed in equal volumes, the resin and hardener react to produce a tough, rigid, high strength bond, which starts to set in 5 minutes and reaches handling strength in 1 hour. The static mix nozzle delivers a uniform mixture of resin and hardener every time. It can be used as an adhesive for a wide range of materials or as versatile filler for gap bonding, surface repairs and laminating. Loctite Epoxy 5 Minute Instant Mix does not shrink and is resistant to water and most common solvents. It can be tinted with earth pigments, cement or sand for color matching and can be sanded and drilled. Our uncompromising level of quality and innovation is achieved through a strong commitment to research and development. This commitment to innovation, quality and reliability has truly earned Loctite the reputation of delivering "Trusted Performance. Proven Results".

• Easy-to-use self-mixing dispenser and precision applicator
• High-strength formula bonds wood, metal, tile, ceramic, glass, plastic and more
• Waterproof, sand able and paintable
• It can be used as an adhesive for a wide range of materials or as a versatile filler for gap bonding, surface repairs and laminating.
• Loctite Epoxy Instant Mix 5 Minute does not shrink and is resistant to water and most common solvents.
• The static mix nozzle delivers a uniform mixture of resin and hardener every time.
• It can be tinted with earth pigments, cement or sand for color matching and can be sanded and drilled.
• Recommended for bonding metal, glass, ceramic, wood, many rigid plastics, china, tile, fiberglass, concrete and stone.

User questions & answers

Question:	Can this be used to repair scratches in quartz countertops
Answer:	I wouldn't use it to repair quartz since it is a porous solid when it cures.
Question:	does the Marine Epoxy come in another color other than white. And are any of your other products suited for constant outdoor use
Answer:	Thank you for your question about Loctite Epoxy Five Minute Instant Mix. This product is not the Marine variation, however that is currently only available in white through us. For any other questions about product specifications feel free to reach us at 800-453-0349. Thanks and have a great day!
Question:	Can this be used multiple times or only once before it dries out or otherwise becomes unusable
Answer:	Two times with the supplied nozels. You can use it more than two times but must mix epoxy by hand and apply with tooth pick or other device
Question:	where can i get extra mixing tips
Answer:	I’ve had good success just squirting it onto some cardboard, mixing with a popsicle stick, then applying to surface.

Product features

5 Minute Instant Mix Epoxy

• CONVENIENT STORAGE - 1 adhesive system, 4 application options: can be stored in refrigerator/freezer for 1-2 years or longer; use for bonding, strengthening, modelling, filling. Up to 600% more effective than regular adhesives.
• HG POWER GLUE BONDS 93% OF ALL MATERIALS - plastic, wood, rubber, glass, metal, aluminum, ceramics, stone etc., this adhesive system forms a tight bond with everything that belongs together
• IDEAL GLUE FOR A HOST OF APPLICATIONS - a crack in the bumper or motorcycle fairing, a broken headlight bracket, torn RV paneling or simply an instant fix for your child’s favorite toy
• SAVE TIME AND MONEY - Nearly all household items can be salvaged quickly at an affordable price. The chemical weld only takes seconds to set and is weatherproof and extremely durable. Resistant to heat and cold (-49°F to +239°F), waterproof and machineable
• SUPERIOR BOND STRENGTH - Welding Glue from the bottle is unparalleled in its performance and, due to its unique combination of powder and glue, achieves significantly better bonds than standard glues

Product features

YOUR TOP BENEFITS AT A GLANCE:

• 600% more sticking strength than anything you’ve ever known.
• Makes impossible repairs possible
• No more gluing of the dosing tip – it holds for 1-2 years
• 4 different possible applications
• No prior knowledge necessary

Delivery: Adhesive: 25ml (0.8 oz) granules: 40g (1.4 ounces)

Made in USA

What can the HG Power Glue really do?

Through the alternating application of powder and industrial adhesive, a bomb-proof chemical compound is created in just a few seconds, which permanently and cost-effectively repairs broken parts, cracks, and tears.

The HG industrial adhesives are very long lasting cyanoacrylate adhesives.

For filling and reinforcing

• Ideally suited for use on extreme fractures.

For cracks

• With soft materials (such as tarpaulins, rubber, etc.) the bonding joint remains elastic.
• With transparent materials (such as glass, perspex, etc.) the bonding joint remains transparent.

Modelling

• Reconstruct broken parts

The bonded area can be sanded and painted immediately after curing.

Which materials work with HG Power Glue?

Plastic, metal, glass, wood, rubber, stone, and porcelain are all materials that can easily and permanently be glued using HG Power Glue.

Which ones don’t?

Attention: silicone and plastics like PE (Polyethylene) or PP (Polypropylene) can only be permanently bonded together by using a primer.

Not suitable for absorbent materials (textils, jeans, ...)

Step 1: Clean surface

In order for the Weld in a Bottle to develop its full adhesive power, it is essential that the surface of the breakage is first sand the surface then clean it thoroughly. The surface must be clear of any and all residue such as rust, grease, glue or dust and the surface must be completely dry.

We recommend the specially manufactured HG Cleaner to ensure a fully cleaned surface.

Step 2: Apply powder

Now that the surfaces are properly prepared, the damaged parts are joined together exactly at the point of the breakage. The welding powder is applied directly and generously but the height of the powder should not exceed 2mm during application.

Without the second component – the industrial adhesive – there is no chemical reaction at this point.

Step 3: Apply adhesive

In the third step, the glue is dripped over top of the granulate until the powder is saturated. When the two substances come into contact, there is an immediate chemical reaction and heat is generated.

It is recommended that both sides of the breakage. The more often you repeat the application process, the stronger the adhesive will be.

Step 4: Harden the chemical weld seam

It only takes a few seconds for the complex chemical reaction to be completed and for the Weld from a Bottle to develop its bomb-proof strength.

The bonded area can be sanded and painted immediately after curing and is much more stable than conventional adhesive bond.

Actual strength may vary by material.

USE GLUE ONLY? - No problem (examples below)

• PVC taroaulin
• Porcelain
• Ceramic repair
• Shoes repair
• Leather
• and much more

Watch the videos above! We show you a few applications and of course some hardness tests.

Product description

For invisible repairs to difficult-to-bond plastics like polyethylene, polypropylene and Polytetrafluoroethylene, Loctite Super Glue Plastics Bonding System (681925) gets the job done. Loctite Plastics Bonding System is a two-part cyanoacrylate adhesive that sets in seconds, dries transparent, and successfully bonds plastics with no mixing or clamping required. Resistant to water, most chemicals, and even freezing temperatures, Loctite Super Glue Plastics Bonding System delivers truly tremendous strength in just a single drop. Each order includes one 4ml activator for priming and one 2g tube of super glue.

• Advanced Bonding System: Two-part adhesive formula includes glue and activator to prime surfaces for a superior bond
• Fuses Hard-to-Bond Plastics: Easily bonds to plastics such as polyethylene (PE), polypropylene (PP), and Polytetrafluoroethylene (PTFE)
• Tremendous Strength: Highly-resistant, strong cyanoacrylate adhesive with no required clamping or mixing
• Sets in Seconds: Bonding system instantly dries transparent for invisible repairs
• Weatherproof: Resistant to water, most chemicals, and freezing temperatures

User questions & answers

Question:	Looking for something which will glue dirt bike fenders and atv bodies, does this work by dissolving the polyethelyne similar to how pvc cement does
Answer:	No.not even close ....sorry.
Question:	Will this work on polyethelyne
Answer:	I used it to relaminate the tips and tails on cross country ski bottoms that had 15 plus seasons on them. It was the only thing I found that worked. It wasn’t perfect, as there were a few small voids, but it was hard to apply clamping force everywhere on compressed surface. I put several more season on them, before getting new skis and they still get use for guests and backup. I ski quite a bit as the cabin is on North America’s largest XC trail system and there is much steep terrain. Polethylene is the most come material for ski bottom. I had tried basic cyanoacrylate before with no success. The Loctite is still a cyanoacrilate but the catalyst supplied with it must be the key. Easy to use too, the catalyst applies like a magic marker. Good luck.
Question:	Does it come with the syringe
Answer:	No
Question:	What is the set time
Answer:	I broke the ear piece on my glasses. I applied the loctite plastic glue to the broken part and in about an hour I was wearing my glasses and so for the last three weeks the repaired part is still holding together.