14 best epoxy resin finish

• Perfect for any application - the Dr Crafty epoxy resin kit is ideal for wood finishes, clear coating plus many more applications. It is strong, transparent and fully UV resistant ensuring long lasting results.
• Everything you need included - our art resin kit comes with bonus items so you can get started right away: 2 x 16.9 ounce measuring cups with spouts, 2 x large sticks for mixing and 2 x plastic spreader to ensure an even finish.
• Easy to use - straightforward and no confusion, just mix one part resin to one part hardener and then you'll have 45 minutes of work time at room temperature to produce your finest work!
• Great quality - unlike cheap alternatives this epoxy resin will remain clear all the time, our resin is fully resistant to yellowing as well as being non-toxic
• Read the manual carefully - Please read the instruction manual provided with the DR.CRAFTY epoxy resin kit closely before use. If you have any questions or issues regarding the kit please do not hesitate to send the seller a message through Amazon and we will respond within 24 hours.

User questions & answers

Question:	what is the viscosity of the epoxy? Also, can it stay underwater
Answer:	Tried these on a small painted sheet metal flap on an outdoor squirrel feeder. 50% failure rate for adhesion in 40F weather.
Question:	FDA compliant
Answer:	1/8-inch
Question:	can you use a hand held blow dryer instead of a heat gun for air bubbles
Answer:	Of course, BAIPOK non slip furniture pads have a strong sticky 3m backing, it can stick firmly on wood, metal, fabric , and other surfaces.
Question:	how can i activate my free gift card, No one answers the text I send, and the QR code takes me to a page that has nothing to do with them
Answer:	Yes, they can. These furniture non slip pads are designed to anti-slip, and the soft rubber can protect floors and reduce noise when moving furniture.

Product features

Practical & Convenient.

____________

Dr. Crafty Epoxy Resin is here to exceed your expectations. We proudly provide you a formula that allows you to bring you projects to life with no unnecessary stress!

2 Part Epoxy Casting Resin Kit. Total Of 64 Oz.

.

All You Need & More!

____________

Always wanted to get into DIY projects? Or maybe you're already an experienced handyman? Our Epoxy Resin set gives you all the tools you need to start creating!

Get Creative!

Our art resin kit comes with everything you need, so you can get started right away: 2 x 16.9 ounce measuring cups with spouts, 2 x large sticks for mixing and 1 x plastic spreader to ensure an even finish.

.

Get Your Formula Ready!

Dr. Crafty Epoxy Resin is ready whenever you are, just mix it and use it straight away according to your needs. We're ready for your next move!

Reliable Consistency.

Our formula was developed to help you every step of the way. We give you the reliable consistency you've been looking for, so you can show off your incredible craft skills!

Remove Imperfections.

Here's the cherry on top! Make your last touch the most important one. To achieve that perfect, clear & strong Epoxy look make sure to use the Heat Gun to get rid of the air bubbles and other undesired features.

Crystal Clear Outcome!

____________

Dr. Crafty Epoxy Resin is what you've been looking for. We promise that our formula is not only easy to use, but also ready to make your projects look like the ones from viral videos about DIY crafts.

.

We are here for you!

____________

In Dr. Crafty we care about our customers. Same as you, all of the Dr. Crafty team members are handyman amateurs and DIY enthusiasts! That's why we provide you the best products possible to help you with all of your projects, no matter how big they are.

.

• Use our clear epoxy resin for all of your casting AND coating applications. Hardens crystal clear and hard as a rock
• Rigorous testing was done to ensure that our resin is a perfect match for all of our glow in the dark and other craft pigments
• Our resin is self leveling, self degassing, odor free, resistant to yellowing from sun exposure, and is made in the U.S.A.
• One to one mix ratio is fool proof and has a forgiving 40 minute work time
• Use to coat tables and bars, encapsulate objects, cast figurines and jewelry, make resin paintings and more

User questions & answers

Question:	How thick can I pour this resin
Answer:	If you set up a damn you could pour it fairly thick (1/4" or so). But depending on the area you wanted to cover you might want to buy more resin. These are about the size of bottles that Bubbles come in. You could also do multiple layers, but that might take a while. Amazon is a good resource, but YouTube has more examples.
Question:	Could I use this to cover a photo mounted on cardboard? If yes, what would be the longevity until the photo underneath would yellow
Answer:	Yes you can definitely do that. Just glue down the photo first with a glue stick and then brush a thin layer of epoxy over the photo and cardboard before doing the actual pour. This will hold the photo in place and prevent air bubbles from escaping from the paper and into the thick coating of resin. As long as the epoxy is kept indoors it should stay clear for a long time. It should only yellow if it is exposed to the sun too much.
Question:	Is this fda approved for use with products that potentially touch food
Answer:	It is okay to use for a table top where food may spill and touch it for a short amount of time but it should not be used for any food containers or in an application that has prolonged contact with food.
Question:	What is the total cure time
Answer:	I've been making dice with this resin, and although it comes out amazingly well, I'd let it cure the full 72 hours before removing from the molds. I have dice that are still tacky after 36 hours. It's worth the wait.

Product features

Artist Approved Epoxy Resin Designed For Your Imagination

Our epoxy resin can be used on canvas, wood, concrete, granite, ceramics, precious stones, rocks, paper, and more to give a durable, glass-like, and crystal clear finish. Our customized epoxy resin formula can also be used for casting objects using any suitable mold available. Whatever your creative idea, art project, or material, bring it to life and make it shine with our specially formulated art resin.

Product Specifications

• Material: Epoxy Resin and Hardener
• Longevity: Resists yellowing due to UV exposure but should not be left permanently outdoors as all epoxy resins will eventually yellow from sun exposure
• Safety: Keep out of reach of children. Use only in a well ventilated area.

Casting

Our proprietary epoxy resin blend is ideal for casting jewelry, including earrings, pendants, rings, figurines, coasters, paperweights, DIY crafts, and custom molds. (Max casting size is 6 fluid ounces.)

Clear Coating

Art ‘N Glow resin is ideal for clear coating and sealing artwork, photography, paintings, paper collages, tabletops, bartops, counters, and more. Our resin cures crystal clear and as hard as a rock.

Fluid Art Pours

Mix our resin with pearl powder, resin tint, and alcohol ink to create one-of-a-kind fluid pour creations. Choose from 19 pearl pigment colors. All pigments are designed to work flawlessly with our resin.

Glow in the Dark Crafts

Blend our resin with Art 'N Glow glow in the dark pigment powder to create artwork that glows for up to 12 hours. We have 14 glow in the dark colors to choose from. Just charge with a UV light or the sun for a bright and long lasting glow!

• ✔ CRYSTAL CLEAR - Our Table Top Epoxy cures ultra clear making it perfect for table tops, bar tops, and countertops
• ✔ UV RESISTANT - Unlike many other epoxies, our epoxy resist yellowing caused from exposure to Ultra Violet Light Sources
• ✔ SELF LEVELING - Bar Top Epoxy self levels on application including corners, over bar rails and edges.
• ✔ HIGH GLOSS DURABLE FINISH - Epoxy resin leaves durable, blemish resistant, water resistant and impact resistant coating
• ✔ 100% SOLIDS - Low Odor, ZERO VOC, consistent thickness, quick curing 1 to 1 mixture, 1 Gallon Kit

User questions & answers

Question:	Is it required to use a ventilator mask when using? and is this Resin food safe
Answer:	It is not required. However, you should use the epoxy in a well-ventilated area. It is possible to be food safe. However, because the customer is mixing/pouring we cannot say this is food safe. Each mixture/application would have to be assessed individually.
Question:	Id like to dye the epoxy different shades of green but I need it to stay transparent. Any suggestions
Answer:	There are various dyes and pigments to choose from. It really depends on how deep of a green you'd like while maintaining transparency. I would suggest trying multiple on a sample area so that you can gauge the color/transparency of the pigment/dye.
Question:	I have stained my bar top with an oil based stain. Can I use the epoxy over it or do I need to do some other prep
Answer:	You can use a water-based clear coat on top of the stain. After the clear coat has cured, use a 320grit sand paper to take the shine off. You can then apply the table top epoxy.
Question:	What’s the diameter of the cap? I want to buy pumps to fit, thanks
Answer:	The cap is 1.5 inches in diameter. Let us know if you have any other questions. Thanks!
Question:	How much does it discover ( sq feet
Answer:	Covers apx 750 sq inches.
Question:	I have a heavy marble table, the bottom mount under the top broke off, would it be strong enough for this application
Answer:	I got a job to put together a 13 foot marble altar, weighing several tons. I used this stuff to glue the hundreds of marble pieces together, after testing the bond strength, and it's still standing today. Granted there isn't any real strain on the joints in most places, but the bond is stronger than the marble itself. This is good stuff.
Question:	Can it fix on the cracks of corina counter top
Answer:	Hi Chris,It is great for crack repair as long as the crack is wide enough to be able to get the material down in it. A good rule of thumb is that crack needs to be wide enough to get a credit card wedged between. Good luck!
Question:	What type of colorant can be used with the product - is the resin considered a polyester resin. The product details are not very precise
Answer:	For coloring the resin I have used Custom 4 Coloring Kit for Epoxy Gluing or Repairing of Granite,...Sold by: GRANITE POLISHING PADSYou can order this item from amazon. The dye is very efficient and seems to work very well with the resin. Yes this epoxy appears to be some sort of polyester. As soon as u add the hardener the epoxy hardens fast but it gives you enough time work with. My results were very good although didn't polished it yet. Good luck

Product features

Crystal Clear Finish

High gloss, ultra clear finish makes our epoxy perfect for Table Tops, Bars Tops, Coffee Tables, Live Edge Tables and other coating applications. However, epoxy is not flexible. River tables must be supported to prevent flexing which could cause cracking.

*Do not pour over oil-based paint or stain.

Common Question: My project is painted or stained with an oil based product, what can I do?

A: You can apply a water based clear coat (must be water based). Once the water based clear coat has fully cured, you can apply the epoxy. If the clear coat leaves a shine/gloss you may want to scuff the surface to ensure the epoxy properly sticks. We recommend using 320 grit sandpaper. If you do sand, be sure to thoroughly clean the surface prior to applying the epoxy. We recommend using Isopropyl Alcohol 99% (be sure it is 99%) to clean.

UV Resistant

Although most epoxies will yellow over time, some resist yellowing caused by exposure to ultraviolet light better than others. Our epoxy contains UV Inhibitors which helps to resist yellowing. *Although our epoxy is UV resistant, which resists yellowing, we do not recommend leaving finished projects in direct sunlight or for permanent outdoor applications.

Common Question: Can I use this on a table that will be outside on a covered patio?

A: It is possible to leave the epoxy outdoors if not exposed to direct UV exposure. If the epoxy is exposed to direct UV, the epoxy can yellow. This will be more noticeable on white or lightly colored substrates/surface. We recommend exercising caution when considering use over white or light-colored surfaces.

It is also important to consider temperature fluctuations. Materials such as metal and glass can expand and contract at a different rate from the epoxy. This could cause glass to crack or the epoxy to peel away from a metal surface.

Food Safe Epoxy

Properly cured epoxy is possible to be food safe. However, because the customer is mixing/pouring we cannot say this is food safe approved. Each mixture/application would have to be assessed individually. This is not a high heat epoxy. We recommend using hot pads/coasters for coffee mugs, hot pans, pots, etc.

Common Question: Can I use this epoxy to make tumblers?

A: We have many customers using our epoxy for custom tumbler designs. However, this epoxy self levels. Therefore, many customers utilize a "cuptisserie" which is a rotating device that keeps the tumbler rotating while the epoxy is curing so that the finish is even.

Again, keep in mind: Properly cured epoxy is possible to be food safe. However, because the customer is mixing/pouring we cannot say this is food safe approved. Each mixture/application would have to be assessed individually.

Colored Epoxy Compatible

How To Color Epoxy: Our epoxy mixes well with mica pigment powders for colored epoxy applications. River tables, resin art canvas and more may require tinted epoxy. Epoxy is not meant to be mixed with or poured over oil-based products. Do not pour over oil-based paint or stain.

Common Question: What type of pigment or dye should I use with this epoxy.

A: We do not recommend mixing epoxy with paint or anything oil based. Many of our customers use mica pigment powders. Mica pigment powders come in many different colors, glitters, metallics, and even glow in the dark.

Q: How Much Pigment Powder Should I Use?

A: This is a subjective answer as it depends on the certain hue and level of opacity desired. We suggest starting with a very small amount and adding more until the desired color is achieved. We also always suggest testing a small scrap piece of material to understand how the epoxy will flow and how the color will cure in the epoxy.

Easy To Use 1:1 By Volume Mixture

Self Leveling, Impact Resistant, Superior Air Release

Popular uses include wooden bar tops, river tables, embedding pictures or embedding solid objects into a desired surface. Because our epoxy cures crystal clear, multiple layers will not compromise color/transparency. Each poured layer should not exceed 1/4" at a time. Working Time: 25 (+/-5 Minutes)

How Much Epoxy Do I Need?

Our rule of thumb regarding coverage is 12 sqft per mixed gallon at 1/8 inch.

Family Owned Business, Made In USA

VARIETY OF APPLICATIONS

For Uses On

• Wood
• Concrete
• Bottle Caps
• Artwork
• Canvas

Common Question: Can I apply epoxy over paper products like photographs, cigar wrappers, playing cards, and more?

A: If you wish to apply paper decals, bottle caps, or other objects under the Table Top surface, those objects need to be bonded to the surface with craft glue or a thin layer of Table Top Epoxy. Paper products must be sealed prior to applying any epoxy as the epoxy could soak in and ruin the paper product.

You can use something like mod podge or a similar water based clear coat/glue. Allow this seal coat to dry thoroughly before applying epoxy. For figurines, shells, and other large more three-dimensional items, using a thin epoxy seal coat is best, prior to encapsulating.

HIGH GLOSS FINISH

Epoxy resin leaves durable, blemish resistant, water resistant and impact resistant coating.

The beauty of epoxy is the ability to recoat a surface after years of use to regain a smooth, high gloss finish.

Common Question: I see that your epoxy requires thin pours of no more than 1/4" per application. How long do I need to wait between pouring a new layer?

You can apply the second coat when the prior coat is tacky to the touch (usually 4-6 hours depending on temperature). If you wait longer than 12 hours between coats, we recommend a light sanding. You can use 320 grit to scuff the surface. This will help the next coat to properly stick. If you do sand, be sure to thoroughly clean the surface prior to pouring the flood coat. We recommend using Isopropyl Alcohol 99% (make sure it is 99%) to clean.

TOP QUALITY

Incredible Solutions Table Top Epoxy is proudly MADE IN THE USA.

Competent Knowledge Base helps plan and troubleshoot even the most complicated projects.

Common Question: Does your epoxy require specific temperature environment to mix/pour epoxy?

A: The ideal working temperature is around 77°F. Best results can be obtained at temperatures between 75°F and 85°F, in a clean, dry, dust-free environment. Avoid working in high humidity. It is important you keep your project in this environment throughout the entire curing process. We recommend using this product on a leveled and flat work surface so that it can flow and self-level properly.

• ✔ CRYSTAL CLEAR EPOXY RESIN- Cures Ultra Clear For Superior, Smooth Glossy Finish
• ✔ UV Resistant- Enhanced UV PRO Resistance Formula Helps Resist Yellowing Caused By Exposure To Ultraviolet Light
• ✔ EASY TO USE- 1:1 By Volume Mixture, 100 Solids, Low Odor, Direction For Use Pamphlet Included
• ✔ SELF LEVELING - Perfect For Bar Tops, Table Tops, Live Edges, Bar Rails & Countertops
• ✔ DURABLE FINISH- Impact Resistant, Waterproof When Cured, Resist Scratches & Blemishes

User questions & answers

Question:	Is it FDA approved
Answer:	Yes! A hairdryer is ok, but it is best to use a heat gun.
Question:	Can you use this product in molds for a solid project like a clear paper weight
Answer:	Same for me. The QR code on the flyer does not work and no response with I set the number listed. Just want to receive my free pigments and powders.
Question:	Do you recommend this product or crystal clear naked fusion for outdoor bar cover
Answer:	Don’t know. I use under dish plates etc
Question:	My product has a coat of water-based primer. Can I apply the epoxy to this
Answer:	We use them on a glass table and they work great.

Product features

Crystal Clear Finish

High gloss, ultra clear finish makes our epoxy perfect for Table Tops, Bars Tops, Coffee Tables, Live Edge Tables and other coating applications. However, epoxy is not flexible. River tables must be supported to prevent flexing which could cause cracking.

*Do not pour over oil-based paint or stain.

Common Question: My project is painted or stained with an oil based product, what can I do?

A: You can apply a water based clear coat (must be water based). Once the water based clear coat has fully cured, you can apply the epoxy. If the clear coat leaves a shine/gloss you may want to scuff the surface to ensure the epoxy properly sticks. We recommend using 320 grit sandpaper. If you do sand, be sure to thoroughly clean the surface prior to applying the epoxy. We recommend using Isopropyl Alcohol 99% (be sure it is 99%) to clean.

UV Resistant

Although most epoxies will yellow over time, some resist yellowing caused by exposure to ultraviolet light better than others. Our epoxy contains UV Inhibitors which helps to resist yellowing. *Although our epoxy is UV resistant, which resists yellowing, we do not recommend leaving finished projects in direct sunlight or for permanent outdoor applications.

Common Question: Can I use this on a table that will be outside on a covered patio?

A: It is possible to leave the epoxy outdoors if not exposed to direct UV exposure. If the epoxy is exposed to direct UV, the epoxy can yellow. This will be more noticeable on white or lightly colored substrates/surface. We recommend exercising caution when considering use over white or light-colored surfaces.

It is also important to consider temperature fluctuations. Materials such as metal and glass can expand and contract at a different rate from the epoxy. This could cause glass to crack or the epoxy to peel away from a metal surface.

Food Safe Epoxy

Properly cured epoxy is possible to be food safe. However, because the customer is mixing/pouring we cannot say this is food safe approved. Each mixture/application would have to be assessed individually. This is not a high heat epoxy. We recommend using hot pads/coasters for coffee mugs, hot pans, pots, etc.

Common Question: Can I use this epoxy to make tumblers?

A: We have many customers using our epoxy for custom tumbler designs. However, this epoxy self levels. Therefore, many customers utilize a "cuptisserie" which is a rotating device that keeps the tumbler rotating while the epoxy is curing so that the finish is even.

Again, keep in mind: Properly cured epoxy is possible to be food safe. However, because the customer is mixing/pouring we cannot say this is food safe approved. Each mixture/application would have to be assessed individually.

Colored Epoxy Compatible

How To Color Epoxy: Our epoxy mixes well with mica pigment powders for colored epoxy applications. River tables, resin art canvas and more may require tinted epoxy. Epoxy is not meant to be mixed with or poured over oil-based products. Do not pour over oil-based paint or stain.

Common Question: What type of pigment or dye should I use with this epoxy.

A: We do not recommend mixing epoxy with paint or anything oil based. Many of our customers use mica pigment powders. Mica pigment powders come in many different colors, glitters, metallics, and even glow in the dark.

Q: How Much Pigment Powder Should I Use?

A: This is a subjective answer as it depends on the certain hue and level of opacity desired. We suggest starting with a very small amount and adding more until the desired color is achieved. We also always suggest testing a small scrap piece of material to understand how the epoxy will flow and how the color will cure in the epoxy.

Easy To Use 1:1 By Volume Mixture

Self Leveling, Impact Resistant, Superior Air Release

Popular uses include wooden bar tops, river tables, embedding pictures or embedding solid objects into a desired surface. Because our epoxy cures crystal clear, multiple layers will not compromise color/transparency. Each poured layer should not exceed 1/4" at a time. Working Time: 25 (+/-5 Minutes)

How Much Epoxy Do I Need?

Our rule of thumb regarding coverage is 12 sqft per mixed gallon at 1/8 inch.

Family Owned Business, Made In USA

VARIETY OF APPLICATIONS

For Uses On

• Wood
• Concrete
• Bottle Caps
• Artwork
• Canvas

Common Question: Can I apply epoxy over paper products like photographs, cigar wrappers, playing cards, and more?

A: If you wish to apply paper decals, bottle caps, or other objects under the Table Top surface, those objects need to be bonded to the surface with craft glue or a thin layer of Table Top Epoxy. Paper products must be sealed prior to applying any epoxy as the epoxy could soak in and ruin the paper product.

You can use something like mod podge or a similar water based clear coat/glue. Allow this seal coat to dry thoroughly before applying epoxy. For figurines, shells, and other large more three-dimensional items, using a thin epoxy seal coat is best, prior to encapsulating.

HIGH GLOSS FINISH

Epoxy resin leaves durable, blemish resistant, water resistant and impact resistant coating.

The beauty of epoxy is the ability to recoat a surface after years of use to regain a smooth, high gloss finish.

Common Question: I see that your epoxy requires thin pours of no more than 1/4" per application. How long do I need to wait between pouring a new layer?

You can apply the second coat when the prior coat is tacky to the touch (usually 4-6 hours depending on temperature). If you wait longer than 12 hours between coats, we recommend a light sanding. You can use 320 grit to scuff the surface. This will help the next coat to properly stick. If you do sand, be sure to thoroughly clean the surface prior to pouring the flood coat. We recommend using Isopropyl Alcohol 99% (make sure it is 99%) to clean.

TOP QUALITY

Incredible Solutions Table Top Epoxy is proudly MADE IN THE USA.

Competent Knowledge Base helps plan and troubleshoot even the most complicated projects.

Common Question: Does your epoxy require specific temperature environment to mix/pour epoxy?

A: The ideal working temperature is around 77°F. Best results can be obtained at temperatures between 75°F and 85°F, in a clean, dry, dust-free environment. Avoid working in high humidity. It is important you keep your project in this environment throughout the entire curing process. We recommend using this product on a leveled and flat work surface so that it can flow and self-level properly.

• CRYSTAL CLEAR, HIGH GLOSS FINISH: Get stunningly clear, beautiful results on bar tops, table tops, and countertops. Ideal for kitchen and bath remodeling projects.
• TWO PART POURABLE EPOXY IS EASY TO USE: Simple 1: 1 mix ratio, easy to tint with mica powder, alcohol ink, and liquid pigments. Self-leveling resin system is easy to pour.
• DURABLE EPOXY RESISTS SCRATCHES, STAINS, AND YELLOWING: Cures smooth as glass at room temperature, with no blushing. 100% waterproof upon full cure.
• WIDE RANGE OF PROJECTS: Get pro results on wood, metal, stone, ceramic and concrete tables, bar tops, countertops as well as resin art, embedding objects, decoupage, casting & other crafting projects.
• PREMIUM QUALITY EPOXY SYSTEM FOR DIY AND PROFESSIONAL MAKERS. BPA-free formula contains no VOCs. Choose this smart alternative to products containing harsh industrial chemicals. 1 Gallon kit includes 1/2 gallon resin & 1/2 gallon hardener. 100% Made in the USA.

User questions & answers

Question:	I want to end up with a 1/4 inch thick surface. I'm reading that I should pour in 2 batches? Are there any caveats for multiple pours
Answer:	Although our epoxy is UV resistant, which resists yellowing, we do not recommend leaving finished projects in direct sunlight or for permanent outdoor applications.
Question:	What do you use to thin this
Answer:	As long as this is water-based and it has fully cured, this should be fine. On the other hand, epoxy cannot be poured directly over oil based products. How long ago did you apply the water based primer?
Question:	Can I pour this into a mold up to 1 1/2" thick at one time
Answer:	Viscosity is 10000-12000cps
Question:	Is it a good adhesive for joining wood
Answer:	Hi there! Our product is non-toxic, however, it hasn't been tested as food-contact safe.

Product features

TotalBoat TableTop Epoxy Gallon Kit Creates 12 Square Feet of Crystal Clear Perfection.

TotalBoat TableTop Epoxy is a 2-part, ultra-clear, 100% waterproof, liquid epoxy resin coating for bar tops, counter tops, table tops, furniture, chart tables, galley tables, coasters, DIY arts & crafts projects, and much more. This easy-to-use, pourable resin has a simple 1:1 mix ratio by volume to ensure great results, even if it's your first time working with it. After pouring the mixed resin onto the prepared surface, small bubbles may appear, but they can be popped easily by waving a heat gun back and forth just above the surface. This self-leveling epoxy spreads out evenly as it cures. After it dries clear & glossy, it looks so wet, people are afraid to touch it!

TableTop is also thicker, clearer & easier to use than varnish—and a lot more heat resistant. It creates the same thick, glossy, super-clear coating you see on restaurant bar and table tops. Plus its high viscosity and high-build properties mean a single coat is equal in appearance to several coats of expensive varnish.

Customize your top by embedding objects beneath the surface.

Clear coat a flat surface as is, or be creative & embed interesting objects beneath the crystal clear coating. Preserve & display photos, bottle caps, magnets, charms, & other cherished trinkets on your custom top. For a striking 3-D effect that makes objects seem to float beneath the surface, pour multiple 1/8" flood coats (waiting 4-8 hours between each coat), and embed objects in each layer.

Is cured TableTop food safe?

TotalBoat TableTop contains no harmful VOCs, which means a safer work environment when mixing, pouring, stirring & spreading, but be sure to wear proper gloves and have adequate ventilation.

TableTop is also BPA-free, so once cured, it's more suitable for contact with food. That said, we don't recommend using epoxy for a cutting board.

Frequently Asked Questions

Q: What’s the coverage for TotalBoat TableTop Epoxy?

A: At 1/8” thickness: 6 sq. ft. per mixed 2-Quart Kit; 12 sq. ft. per mixed Gallon Kit; 24 sq. ft. per mixed 2-Gallon Kit. At ¼” thickness: 3 sq. ft. per mixed 2-Quart Kit; 6 sq. ft. per mixed Gallon Kit; 12 sq. ft. per mixed 2-Gallon Kit.

Q: Why do I need multiple coats? Won’t one thick coat do the trick?

A: Multiple thin layers give you a sealer/leveling coat and as much build as you would like without the high risk for errors, bubbles, or a wavy surface.

Q: Can I use it on my bar top outside?

A: You can, but it will be exposed to UV rays that can make it look amber or delaminate over time, depending on substrate. You’ll want to overcoat it with a quality UV-filtering varnish.

Prepare the surface

• To contain the liquid epoxy, apply plastic packing tape (as it can be removed easily) around the edges of the table.
• Delicate objects such as photos or maps can be damaged by epoxy. Coat them first with an alternate clear coat (polyurethane or acrylic sealers are recommended) before applying TableTop Epoxy.
• Combine the epoxy resin (Part A) and hardener (Part B) at the specified, simple mix ratio of 1 to 1 by volume, and mix for 3-5 minutes, then transfer to another mixing cup and keep stirring until the mixture is blended thoroughly.
• To begin, use a brush to apply a very thin sealer coat of TableTop Epoxy to the table top or bar top to seal porous surfaces. This includes applying a thin sealer coat to any objects that will be embedded. If you skip this step, the porous surface or embedded objects will release large air bubbles that can ruin your project.

Pour the mixed epoxy

• Once the sealer coat has set, apply a flood coat.
• Pour less epoxy into any narrower areas, and more epoxy into wider, more open areas.
• Each flood coat should be no more than 1/8” thick.
• You can pour multiple flood coats (waiting at least 4 hours in between each coat) until you achieve the desired thickness. Tip: Multiple pours are recommended. Do not attempt one thick flood coat because air bubbles will get trapped beneath the surface, and the excess heat generated by a thick pour will distort the surface itself. The epoxy will not self level or cure properly.

Spread evenly

• Flood coats will flow and self level, but tools such as brushes, plastic spreaders, and squeegees may be used to help spread the mixed epoxy resin evenly across the surface.
• If you like, you can embed objects such as shells or bottle caps at this stage. You can also embed objects in subsequent flood coats in order to make the objects appear to float beneath the surface.

Remove surface bubbles

• A few minutes after the flood coat is applied, bubbles will rise to the surface. To pop the bubbles, use a heat gun (or butane torch) on low power, hold it six inches above the surface of the epoxy resin, and slowly sweep the heat gun back and forth over the surface, until the bubbles disappear. It's very important to wave the heat gun around and keep it moving, so you don't burn or singe embedded objects.
• TotalBoat TableTop Epoxy can usually be recoated in 4-8 hours without any additional prep work or sanding.
• If the previous layer is allowed to dry completely, the surface should be scuff-sanded with 220-320 grit sandpaper, for optimal adhesion between coats. After sanding, wipe the surface with a solvent such as acetone or denatured alcohol to remove dust and other contaminants. Allow the surface to dry before applying the next 1/8" flood coat.
• For any areas that have blemishes, sand with 80-grit sandpaper, before applying a final coat.

Coffee table with embedded pennies

"Great product. Exactly what I needed to finish my penny coffee table project." - Vince, via Amazon Reviews

Dining table with embedded decal

"My wife wanted a custom dining table with an embedded Compass Rose decal. I did a seal coat, then the first flood coat of TableTop Epoxy. I applied the Compass Rose decal on top of the first flood coat because I wanted the decal to be raised above the wood surface. Waited four hours, then did a second 1/8" pour of TableTop Epoxy. I beveled the edges and the table is beautiful. All my neighbors want me to make one for them!" - Joe O., TotalBoat store customer

Boat table with embedded objects

"This stuff is awesome. Use a small heat gun to quickly pop any bubbles. We used this for a boat table with a map, compass, micrometer, anchor trinket, and a silver dollar "trapped" in the clear epoxy. One tip: order extra. A whole gallon did not cover the galley table more than a quarter inch. I wish I had bought two gallons because you can recoat between four to eight hours without any prep or sanding. Highly recommend!" - Brendan Keefe, via Amazon Reviews

Clear coated tabletop

"Easy to work with, perfect clear finish." - Nicole Littletaylor, via Amazon Reviews

• ✔ CRYSTAL CLEAR - Our Table Top Epoxy cures ultra clear making it perfect for table tops, bar tops, and countertops
• ✔ UV RESISTANT - Unlike many other epoxies, our epoxy resist yellowing caused from exposure to Ultra Violet Light Sources
• ✔ SELF LEVELING - Bar Top Epoxy self levels on application including corners, over bar rails and edges.
• ✔ HIGH GLOSS DURABLE FINISH - Epoxy resin leaves durable, blemish resistant, water resistant and impact resistant coating
• ✔ 100% SOLIDS - Low Odor, ZERO VOC, consistent thickness, quick curing 1 to 1 mixture, TWO Quart Kit

User questions & answers

Question:	can it be spread with a stick or brush
Answer:	Yes you can, but be sure you thoroughly mix the two parts together. If you do, you will have no problem. I would add, that if you pour the mix into a mold that is narrow and tall, like the graphite shaft of a golf club (something I did) you will develop noticeable heat which accelerates the cure, you can reduce the hardener to less than 1-1. Also, on thick pours, you will want to watch the mixture for the first hour and use a heat source to eliminate bubbles coming to the surface. Mix thoroughly but mix slowly and smoothly to avoid creating excess bubbles.
Question:	Is this product usa nsf
Answer:	This is not the product for joining wood, you would want to use a regular epoxy and add some fillers.
Question:	My bbq pit has a wood table attached to it ,can i use epoxy on in for a custom design without the resin melting or burning
Answer:	It is possible to be FDA approved. However, because the customer is mixing/pouring we cannot say this is FDA approved. Each mixture/application would have to be assessed individually.
Question:	Can i use this as a leveling agent on a low spot on vinyl floor prior to laying a laminate floor over top
Answer:	Yes, you can. However, this requires thin pours of no more than 1/8" per application. Therefore, you would have to build up the layers. Alternatively, we have a Deep Pour Casting Resin: https://www.amazon.com/Pourable-Plastic-Clear-Casting-Resin/dp/B07HGNHM7V which may be more suitable. We actually have a video of clear molds here: https://www.amazon.com/vdp/6e9f8bc7633d4a9eb0cc3f436ca64c6d?ref=cm_sw_em_r_ib_dt_iO5nD5DCTNiH9

Product features

Crystal Clear Finish

High gloss, ultra clear finish makes our epoxy perfect for Table Tops, Bars Tops, Coffee Tables, Live Edge Tables and other coating applications. However, epoxy is not flexible. River tables must be supported to prevent flexing which could cause cracking.

*Do not pour over oil-based paint or stain.

Common Question: My project is painted or stained with an oil based product, what can I do?

A: You can apply a water based clear coat (must be water based). Once the water based clear coat has fully cured, you can apply the epoxy. If the clear coat leaves a shine/gloss you may want to scuff the surface to ensure the epoxy properly sticks. We recommend using 320 grit sandpaper. If you do sand, be sure to thoroughly clean the surface prior to applying the epoxy. We recommend using Isopropyl Alcohol 99% (be sure it is 99%) to clean.

UV Resistant

Although most epoxies will yellow over time, some resist yellowing caused by exposure to ultraviolet light better than others. Our epoxy contains UV Inhibitors which helps to resist yellowing. *Although our epoxy is UV resistant, which resists yellowing, we do not recommend leaving finished projects in direct sunlight or for permanent outdoor applications.

Common Question: Can I use this on a table that will be outside on a covered patio?

A: It is possible to leave the epoxy outdoors if not exposed to direct UV exposure. If the epoxy is exposed to direct UV, the epoxy can yellow. This will be more noticeable on white or lightly colored substrates/surface. We recommend exercising caution when considering use over white or light-colored surfaces.

It is also important to consider temperature fluctuations. Materials such as metal and glass can expand and contract at a different rate from the epoxy. This could cause glass to crack or the epoxy to peel away from a metal surface.

Food Safe Epoxy

Properly cured epoxy is possible to be food safe. However, because the customer is mixing/pouring we cannot say this is food safe approved. Each mixture/application would have to be assessed individually. This is not a high heat epoxy. We recommend using hot pads/coasters for coffee mugs, hot pans, pots, etc.

Common Question: Can I use this epoxy to make tumblers?

A: We have many customers using our epoxy for custom tumbler designs. However, this epoxy self levels. Therefore, many customers utilize a "cuptisserie" which is a rotating device that keeps the tumbler rotating while the epoxy is curing so that the finish is even.

Again, keep in mind: Properly cured epoxy is possible to be food safe. However, because the customer is mixing/pouring we cannot say this is food safe approved. Each mixture/application would have to be assessed individually.

Colored Epoxy Compatible

How To Color Epoxy: Our epoxy mixes well with mica pigment powders for colored epoxy applications. River tables, resin art canvas and more may require tinted epoxy. Epoxy is not meant to be mixed with or poured over oil-based products. Do not pour over oil-based paint or stain.

Common Question: What type of pigment or dye should I use with this epoxy.

A: We do not recommend mixing epoxy with paint or anything oil based. Many of our customers use mica pigment powders. Mica pigment powders come in many different colors, glitters, metallics, and even glow in the dark.

Q: How Much Pigment Powder Should I Use?

A: This is a subjective answer as it depends on the certain hue and level of opacity desired. We suggest starting with a very small amount and adding more until the desired color is achieved. We also always suggest testing a small scrap piece of material to understand how the epoxy will flow and how the color will cure in the epoxy.

Easy To Use 1:1 By Volume Mixture

Self Leveling, Impact Resistant, Superior Air Release

Popular uses include wooden bar tops, river tables, embedding pictures or embedding solid objects into a desired surface. Because our epoxy cures crystal clear, multiple layers will not compromise color/transparency. Each poured layer should not exceed 1/4" at a time. Working Time: 25 (+/-5 Minutes)

How Much Epoxy Do I Need?

Our rule of thumb regarding coverage is 12 sqft per mixed gallon at 1/8 inch.

Family Owned Business, Made In USA

VARIETY OF APPLICATIONS

For Uses On

• Wood
• Concrete
• Bottle Caps
• Artwork
• Canvas

Common Question: Can I apply epoxy over paper products like photographs, cigar wrappers, playing cards, and more?

A: If you wish to apply paper decals, bottle caps, or other objects under the Table Top surface, those objects need to be bonded to the surface with craft glue or a thin layer of Table Top Epoxy. Paper products must be sealed prior to applying any epoxy as the epoxy could soak in and ruin the paper product.

You can use something like mod podge or a similar water based clear coat/glue. Allow this seal coat to dry thoroughly before applying epoxy. For figurines, shells, and other large more three-dimensional items, using a thin epoxy seal coat is best, prior to encapsulating.

HIGH GLOSS FINISH

Epoxy resin leaves durable, blemish resistant, water resistant and impact resistant coating.

The beauty of epoxy is the ability to recoat a surface after years of use to regain a smooth, high gloss finish.

Common Question: I see that your epoxy requires thin pours of no more than 1/4" per application. How long do I need to wait between pouring a new layer?

You can apply the second coat when the prior coat is tacky to the touch (usually 4-6 hours depending on temperature). If you wait longer than 12 hours between coats, we recommend a light sanding. You can use 320 grit to scuff the surface. This will help the next coat to properly stick. If you do sand, be sure to thoroughly clean the surface prior to pouring the flood coat. We recommend using Isopropyl Alcohol 99% (make sure it is 99%) to clean.

TOP QUALITY

Incredible Solutions Table Top Epoxy is proudly MADE IN THE USA.

Competent Knowledge Base helps plan and troubleshoot even the most complicated projects.

Common Question: Does your epoxy require specific temperature environment to mix/pour epoxy?

A: The ideal working temperature is around 77°F. Best results can be obtained at temperatures between 75°F and 85°F, in a clean, dry, dust-free environment. Avoid working in high humidity. It is important you keep your project in this environment throughout the entire curing process. We recommend using this product on a leveled and flat work surface so that it can flow and self-level properly.

Product description

CRYSTAL CLEAR EPOXY is a SUPER GLOSS , clear polymer that is used for coating wood, veneer, metal, stone, painted surfaces, table tops and many other surfaces to give a rich super gloss look and protect from scratching and air humidity. New improved UV resistance formula. Surfaces coated with this product are very durable, water resistant and easy to care for. Crystal Clear Epoxy contains two parts: 8 oz resin and 8 oz hardener, which are mixed together at a 1 to 1 ratio by volume. Work time is 30-35 min. Detailed instructions are included with each kit. Suitable for wood , metal, concrete, marble, and more!

• Super Gloss Durable Finish
• Water resistant
• Self leveling
• Odorless
• Detailed instruction included with each kit

User questions & answers

Question:	Can this be used in molds
Answer:	Hello, Great question. Our product can withstand 120 degrees Fahrenheit. It would probably not be a good idea since it would be so close to the grill.
Question:	Can this be mixed with wood chips and color dye to create small turning blanks 2 to 3 inches in diameter
Answer:	Self leveling concrete would be a better option. For a bag of concrete and a bottle of primer, you would only be spending 10-15 bucks. We had to level a couple areas in our kitchen before putting down laminate, we were installing the laminate within 4 hours of putting down the concrete.
Question:	coverage level in square feet
Answer:	I believe the product says to do the second pour around 4 hours. I waited 3 days to do my second pour with a very light sanding of 320 grit and a good cleaning/wipe down before the second pour. The sanding did not gouge the first layer or cause any imperfections. With my second pour I only got about 1/8 of an inch. I think you might have to dam up your project if you're looking for 1/4 inch. Good luck...
Question:	I need to fill a couple 3" deep, 12" long, 1/4" wide cracks in a walnut slab. can i use this, or would epoxy adhesive be better
Answer:	This is not designed to be thinned, it is a 1:1 mix ratio.

• ✅ BEAUTIFUL RESULT: Designed to look gorgeous, strong and durable. crystal clear epoxy, amazing clear cast , deep pour. Craft Resin increases the attractiveness and value of whatever it's used on!
• ✅ ALL IN ONE KIT: This kit will give you everything you need to get started with Craft Resin - 500ml/17Oz epoxy resin and 500ml/17Oz hardener; reusable mixing stick and gloves
• ✅ CRYSTAL CLEAR: Cures clear to a glass-like finish.
• ✅ EASY TO USE: Craft Resin is self-leveling, its 1:1 mixing ratio, simply mix two part epoxy: resin and hardener by volume.
• ✅ SAFE: Craft Resin is UV resistant, Food safe, Non-toxic. No VOCs. No solvents. Odorless. Non-flammable. Non-hazardous

User questions & answers

Question:	Can this be used for a door sign
Answer:	Depends on what kind of door sign you are making, I suppose! You could layer resin over a wood sign, you could mold a sign from the resin, etc.
Question:	Can you use this to glue broken ceramic together
Answer:	Super glue or glass glue would be better
Question:	Can this be used on a mosaic tile table top that has a rim around it
Answer:	Yes. This will work on your table top. Just read the directions & follow them to the "T". This resin works very well but the directions have to be followed closely. Good luck & have fun.
Question:	How long is the work time? How long does it typically take before the resin gets tacky
Answer:	Gets tacky about 25 to 35 minutes after you have mixed the 2 parts. Not to say it isnt applyable. That takes...maybe 50 minutes before signs of firming. Should not be messed with at that point. Prepare ahead of time!

• ✔ CRYSTAL CLEAR - Our Table Top Epoxy cures ultra clear making it perfect for table tops, bar tops, and countertops
• ✔ UV RESISTANT - Unlike many other epoxies, our epoxy resist yellowing caused from exposure to Ultra Violet Light Sources
• ✔ SELF LEVELING - Bar Top Epoxy self levels on application including corners, over bar rails and live edges.
• ✔ HIGH GLOSS DURABLE FINISH - Epoxy resin leaves durable, blemish resistant, water resistant and impact resistant coating
• ✔ 100% SOLIDS - Low Odor, ZERO VOC, consistent thickness, quick curing 1 to 1 mixture, 2 Gallon Kit

User questions & answers

Question:	What is the maximum thickness of this epoxy
Answer:	This epoxy requires thin pours of no more than 1/4" per application. However, multiple layers can be poured. We recommend waiting until the prior layer is tacky to the touch (usually 4-6 hours) to pour an additional layer.
Question:	at a half inch depth how many sq feet does the 2 gallon kit cover
Answer:	We have a coverage calculator on our site. Do you need a seal coat? Will you build a dam? Our general rule of thumb is 12 sq ft. per mixed gallon at 1/8 inch. Do not mix more than 1 gallon at a time and do not pour more than 1/4 inch per application. In your case, a 2 Gallon kit would cover approximately 6 sqft at 0.5 inch. However, do NOT pour more than 1/4 inch per application or you risk an accelerated reaction. Wait until the previous layer is tacky to the touch (usually 4-6 hours depending on temperature) to pour the next layer. Please let us know if you have any other questions.
Question:	May i used this for a countertops that have the heat coming from the stove ? Will it hold up
Answer:	This is not a high heat epoxy. We recommend using hot pads/coasters for coffee mugs, hot pans, pots, etc. High heat epoxies are quite a bit more expensive.
Question:	Can't find indication of coverage anywhere. Help. I don't know how much to buy
Answer:	at 1/8 thick it is like 26 gallons for 350 square feet, realy allot more than I would have thought, I learned the hard way too

Product features

Crystal Clear Finish

High gloss, ultra clear finish makes our epoxy perfect for Table Tops, Bars Tops, Coffee Tables, Live Edge Tables and other coating applications. However, epoxy is not flexible. River tables must be supported to prevent flexing which could cause cracking.

*Do not pour over oil-based paint or stain.

Common Question: My project is painted or stained with an oil based product, what can I do?

A: You can apply a water based clear coat (must be water based). Once the water based clear coat has fully cured, you can apply the epoxy. If the clear coat leaves a shine/gloss you may want to scuff the surface to ensure the epoxy properly sticks. We recommend using 320 grit sandpaper. If you do sand, be sure to thoroughly clean the surface prior to applying the epoxy. We recommend using Isopropyl Alcohol 99% (be sure it is 99%) to clean.

UV Resistant

Although most epoxies will yellow over time, some resist yellowing caused by exposure to ultraviolet light better than others. Our epoxy contains UV Inhibitors which helps to resist yellowing. *Although our epoxy is UV resistant, which resists yellowing, we do not recommend leaving finished projects in direct sunlight or for permanent outdoor applications.

Common Question: Can I use this on a table that will be outside on a covered patio?

A: It is possible to leave the epoxy outdoors if not exposed to direct UV exposure. If the epoxy is exposed to direct UV, the epoxy can yellow. This will be more noticeable on white or lightly colored substrates/surface. We recommend exercising caution when considering use over white or light-colored surfaces.

It is also important to consider temperature fluctuations. Materials such as metal and glass can expand and contract at a different rate from the epoxy. This could cause glass to crack or the epoxy to peel away from a metal surface.

Food Safe Epoxy

Properly cured epoxy is possible to be food safe. However, because the customer is mixing/pouring we cannot say this is food safe approved. Each mixture/application would have to be assessed individually. This is not a high heat epoxy. We recommend using hot pads/coasters for coffee mugs, hot pans, pots, etc.

Common Question: Can I use this epoxy to make tumblers?

A: We have many customers using our epoxy for custom tumbler designs. However, this epoxy self levels. Therefore, many customers utilize a "cuptisserie" which is a rotating device that keeps the tumbler rotating while the epoxy is curing so that the finish is even.

Again, keep in mind: Properly cured epoxy is possible to be food safe. However, because the customer is mixing/pouring we cannot say this is food safe approved. Each mixture/application would have to be assessed individually.

Colored Epoxy Compatible

How To Color Epoxy: Our epoxy mixes well with mica pigment powders for colored epoxy applications. River tables, resin art canvas and more may require tinted epoxy. Epoxy is not meant to be mixed with or poured over oil-based products. Do not pour over oil-based paint or stain.

Common Question: What type of pigment or dye should I use with this epoxy.

A: We do not recommend mixing epoxy with paint or anything oil based. Many of our customers use mica pigment powders. Mica pigment powders come in many different colors, glitters, metallics, and even glow in the dark.

Q: How Much Pigment Powder Should I Use?

A: This is a subjective answer as it depends on the certain hue and level of opacity desired. We suggest starting with a very small amount and adding more until the desired color is achieved. We also always suggest testing a small scrap piece of material to understand how the epoxy will flow and how the color will cure in the epoxy.

Easy To Use 1:1 By Volume Mixture

Self Leveling, Impact Resistant, Superior Air Release

Popular uses include wooden bar tops, river tables, embedding pictures or embedding solid objects into a desired surface. Because our epoxy cures crystal clear, multiple layers will not compromise color/transparency. Each poured layer should not exceed 1/4" at a time. Working Time: 25 (+/-5 Minutes)

How Much Epoxy Do I Need?

Our rule of thumb regarding coverage is 12 sqft per mixed gallon at 1/8 inch.

Family Owned Business, Made In USA

VARIETY OF APPLICATIONS

For Uses On

• Wood
• Concrete
• Bottle Caps
• Artwork
• Canvas

Common Question: Can I apply epoxy over paper products like photographs, cigar wrappers, playing cards, and more?

A: If you wish to apply paper decals, bottle caps, or other objects under the Table Top surface, those objects need to be bonded to the surface with craft glue or a thin layer of Table Top Epoxy. Paper products must be sealed prior to applying any epoxy as the epoxy could soak in and ruin the paper product.

You can use something like mod podge or a similar water based clear coat/glue. Allow this seal coat to dry thoroughly before applying epoxy. For figurines, shells, and other large more three-dimensional items, using a thin epoxy seal coat is best, prior to encapsulating.

HIGH GLOSS FINISH

Epoxy resin leaves durable, blemish resistant, water resistant and impact resistant coating.

The beauty of epoxy is the ability to recoat a surface after years of use to regain a smooth, high gloss finish.

Common Question: I see that your epoxy requires thin pours of no more than 1/4" per application. How long do I need to wait between pouring a new layer?

You can apply the second coat when the prior coat is tacky to the touch (usually 4-6 hours depending on temperature). If you wait longer than 12 hours between coats, we recommend a light sanding. You can use 320 grit to scuff the surface. This will help the next coat to properly stick. If you do sand, be sure to thoroughly clean the surface prior to pouring the flood coat. We recommend using Isopropyl Alcohol 99% (make sure it is 99%) to clean.

TOP QUALITY

Incredible Solutions Table Top Epoxy is proudly MADE IN THE USA.

Competent Knowledge Base helps plan and troubleshoot even the most complicated projects.

Common Question: Does your epoxy require specific temperature environment to mix/pour epoxy?

A: The ideal working temperature is around 77°F. Best results can be obtained at temperatures between 75°F and 85°F, in a clean, dry, dust-free environment. Avoid working in high humidity. It is important you keep your project in this environment throughout the entire curing process. We recommend using this product on a leveled and flat work surface so that it can flow and self-level properly.

Product description

Envirotex lite is a reactive polymer compound. It cures to a thick, glossy coating in about 8-hour at 70-Degree f and reaches full strength and toughness in about 72-hour. This durable, resilient material requires no polishing to produce a high gloss. One coat is all that is usually required for a deep attractive finish. However, two or more coats maybe applied one over the other by simply wiping the surface with a clean cloth and alcohol prior to recoating. Envirotex lite may be used on wood, fabric, decals, bisque, photos, paper, metal, models, painted surfaces, dried flowers, plaster, rocks, sea shells, bread dough, Styrofoam and more.

• Preserves and beautifies
• Solvent free formula
• Waterproof
• Heat and alcohol resistant
• 128-Ounce kit covers approximately 32 square feet at 1/16-Inch

User questions & answers

Question:	Can Envirotex be poured over an already existing polycrylic coat, or does it have to be sanded first? How many sq ft does the gallon size cover
Answer:	It covers about 3-4 sq. ft (flood coat, 1 layer)
Question:	Does this product stays clear or does it turn yellowish
Answer:	You can use this epoxy to fill cracks, you can mix sawdust to epoxy and use it as a patch
Question:	Plan to use on an outside table - Gets half sun and half day of shade. Using over boards that are stained and Sikens coated. Only problems with that
Answer:	You can use a plastic spreaders or foam brush. Do not use a traditional paint brush.
Question:	Is this good for resin charms and key chain molds
Answer:	This product is Made In USA. Properly cured epoxy is possible to be food safe. However, because the customer is mixing/pouring we cannot say this is food safe approved. Each mixture/application would have to be assessed individually.

Product features

Environmental Technology 128-Ounce Kit Lite Pour-On, High Gloss Finish, Gallon

EnviroTex Lite is a water clear reactive polymer compound. It cures to a thick, glossy coating in about 8 hours at 70°F, and reaches full strength and toughness in about 48 hours.

This durable, resilient material requires no polishing to produce a high gloss. One coat is all that is usually required for a deep attractive finish, however, two or more coats maybe applied one over the other by simply wiping the surface with a clean cloth and alcohol prior to re-coating.

• Perfect for any application - the Dr Crafty epoxy resin kit is ideal for wood finishes, crystal clear coating plus many more applications. It is strong, transparent and fully UV resistant ensuring long lasting results.
• Everything you need included - our art resin kit comes with bonus items so you can get started right away: 2 x 16.9 ounce measuring cups with spouts, 2 x large sticks for mixing and 2 x plastic spreader to ensure an even finish.
• Easy to use - straightforward and no confusion, just mix one part resin to one part hardener and then you'll have 45 minutes of work time at room temperature to produce your finest work!
• Great quality - unlike cheap alternatives this epoxy resin will remain crystal clear all the time, our resin is fully resistant to yellowing as well as being non-toxic.
• Read the manual carefully - Please read the instruction manual provided with the DR.CRAFTY epoxy resin kit closely before use. If you have any questions or issues regarding the kit please do not hesitate to send the seller a message through Amazon and we will respond within 24 hours.

User questions & answers

Question:	Can this be used as a seal coat
Answer:	Should not matter as this material hardens like 50 coats of varnish and sunlight should not hurt it. I use it on guitars,tables ,signs whatever just make sure you mix it per instructions and I use a heat gun to get out bubbles it works better than a torch.
Question:	What is the best temperature for best results? What is the pot time? What is the casting depth
Answer:	I used this resin for a comic book coffee table
Question:	Hi, just received my order 2 gallon epoxy resin. This resin is twice as thick as the hardener. Is this normal
Answer:	Yes, it can be used in open mold for casting up to 1/2 inch per layer
Question:	Can this be used when creating tumblers
Answer:	Yes, you can do that.

Product features

Practical & Convenient.

____________

Dr. Crafty Epoxy Resin is here to exceed your expectations. We proudly provide you a formula that allows you to bring you projects to life with no unnecessary stress!

2 Part Epoxy Casting Resin Kit. Total Of 2 Gallons.

.

All You Need & More!

____________

Always wanted to get into DIY projects? Or maybe you're already an experienced handyman? Our Epoxy Resin set gives you all the tools you need to start creating!

Get creative!

Our art resin kit comes with everything you need, so you can get started right away: 2 x 16.9 ounce measuring cups with spouts, 2 x large sticks for mixing and 2 x plastic spreader to ensure an even finish.

.

Get Your Formula Ready!

Dr. Crafty Epoxy Resin is ready whenever you are, just mix it and use it straight away according to your needs. We're ready for your next move!

Reliable Consistency.

Our formula was developed to help you every step of the way. We give you the reliable consistency you've been looking for, so you can show off your incredible craft skills!

Remove Bubbles.

Here's the cherry on top! Make your last touch the most important one. To achieve that perfect, clear & strong Epoxy look make sure to use the Heat Gun to get rid of the air bubbles and other undesired features.

Crystal Clear Outcome!

____________

Dr. Crafty Epoxy Resin is what you've been looking for. We promise that our formula is not only easy to use, but also ready to make your projects look like the ones from viral videos about DIY crafts.

This epoxy resin will remain crystal clear all the time, our resin is fully resistant to yellowing as well as being NON-TOXIC.

.

We are here for you!

____________

In Dr. Crafty we care about our customers. Same as you, all of the Dr. Crafty team members are handyman amateurs and DIY enthusiasts! That's why we provide you the best products possible to help you with all of your projects, no matter how big they are.

.

Product description

CRYSTAL CLEAR EPOXY is a SUPER GLOSS , clear polymer that is used for coating wood, veneer, metal, stone, painted surfaces, table tops and many other surfaces to give a rich super gloss look and protect from scratching and air humidity. New improved UV resistance formula. 1 Gallon kit covers around 25 sq.f. (layer thickness 1.5-2 mm) Surfaces coated with this product are very durable, water resistant and easy to care for. Crystal Clear Epoxy contains two parts: resin 1/2 gallon and hardener 1/2 gallon, which are mixed together at a 1 to 1 ratio by volume. Work time is 30-35 min. Detailed instructions are included with each kit.

• Super Gloss Durable Finish
• Water resistant
• Self leveling
• Odorless
• Detailed instruction included with each kit

User questions & answers

Question:	Do they make in matte or satin, or is there any additive to make a matte/satin finish
Answer:	Typically,it is thicker than the hardener. Not sure if it is twice as thick but there is a noticeable difference.
Question:	Can it be poured cast in very thin fine layer as For jewelry
Answer:	Hi there! Even though our epoxy is non-toxic, these have not yet been tested as food-contact safe. So we highly recommend that you avoid contact with food/water for consumption. However, if you plan on epoxying the outer surface of your tumbler then this will work fine.
Question:	can I sand and buff the epoxy once it cures and still have a crystal clear appearance? If so what grit sand paper and with what should I buff it
Answer:	Normaly the previous coats melts with the new ones, the surface should be very clean and dry. You can add a thin layer first, a second one 24 hrs. later and to avoid bubbles use the gas torch. I would'nt recomend sanding, porosity will create a lot of bubbles. In the Envirotex's web page there is a chart which shows amounts of Pour On per sq ft.
Question:	how much do I need to cover a kitchen counter that one is 10 feet long the other is six foot long both are 25 inches
Answer:	No it stays clear

Product description

Want to give your surfaces a long-lasting crystal clear finish?



Applying epoxy resin to your tabletops or countertops will give them a clear, protective coat. Not all epoxy resins stay clear and bright at all times, though. Some resins can start looking dull, especially if it is exposed to elements.



If you are looking for an epoxy resin solution that mixes quickly, pours easily, and stays crystal clear for many years, this easy pour epoxy resin gallon kit is what you need.



Give your surfaces a stunning protective coating with the EasyPour Epoxy Gallon Kit.



When applied properly, epoxy resin can bring out the beauty and detail of different surfaces, such as wooden tabletops, sculptures, and art work. This epoxy resin solution pours smoothly, reducing the formation of bubbles and lumps in the mixture.



Forget about heading to your local hardware to purchase mixing materials. Each kit already includes 2 mixing cups, a silicone spatula, and a plastic spreader. Spend less time sourcing supplies and start working on your DIY projects right away.



Other epoxy resins tend to appear yellowish or lose their clarity under prolonged sun exposure. Our epoxy resin is formulated to withstand UV rays, so you can expect a crystal clear protective coating that lasts much longer.



Need more time to make a decision? Here are more reasons to love this epoxy resin gallon kit:



✔️ Plastic spreader, cups, bottles, and epoxy solution are made in the USA

✔️ BPA-free epoxy resin

✔️ Full-sized cups for quicker mixing

• ✅ START RIGHT AWAY - This Liquid Epoxy Resin Kit Comes With A 64oz Bottle Of Resin And Hardener (Totaling A Gallon Of Epoxy Resin When Mixed), 2 Mixing Cups, A Silicone Spatula, And A Plastic Spreader
• 💎CRYSTAL CLEAR FINISH - Unlike Other Epoxy Resin Crystal Clear And Hardener Kits That Yellow Over Time This Epoxy Resin Crystal Clear Coating Produces A Hard Gloss That Withstands Water And Scratches
• 💧BUBBLE FREE - Create And Culture Seamless Works Of Art. Our Epoxy Crystal Clear Resin Epoxy Is Designed To Mix And Pour Easily, Reducing Bubbles To Deliver A Clear Laminating Finish
• 🔨 ALL YOUR CRAFTS - This Clear Epoxy Resin Art Kit Can Give A Glass-like Glaze To Your Plywood, Floor, Paint, Coffee Table, Countertops, Jewelry, Coasters, Tiles And Marine Boat Fiberglass Projects
• 😄 PERFECT FINISH - This Gallon Of Resin Epoxy Kit Is Self-leveling Epoxy Resin Creates An Amazing, Clear Coating On Wood, Granite, Ceramic, Porcelain, Marble, Laminate, Metal, Canvas, And Much More.

User questions & answers

Question:	what is the heat tolerance? I would like to use this for coasters but have to know if this will tolerate the heat from a hot cup
Answer:	Yes. It is up light sealed or torched. It can withstand the heat from a mug
Question:	Estimated time this product takes to harden
Answer:	Three hours
Question:	can a roller be use to apply
Answer:	I can’t imagine the need for a roller. This product is heavier than paint but self leveling. Pour and if needed, use the tool that comes with it to move it.
Question:	Can I use this to glass a surfboard
Answer:	Yes

• Designed for Table Tops, Bars, Wood finishes, See-Through Encapsulations, Art work, and other applications
• Self Leveling and High Gloss U.V. Resistant Formula
• Produces a Tough, High Gloss, Water Resistant Coating
• Eliminates Craters, Crawling and Fish Eyes
• Blush Resistant. A total of 2 gallon combined

User questions & answers

Question:	Putting 3/4 of an inch down. Do i need to prep different layers. Gonna do it a couple days apart
Answer:	I would sand before recoating... but... it took mine about 3days before i could sand it @ 1/4" thick... so plan for that... maybe sand it with 600grit or even 400 should be just fine
Question:	Are there paints/ primers/ stains/ adhesives that I should avoid using under the resin? I am planning to stain/ prime a wood base w/ objects glued on
Answer:	Embedding solid objects: Wood, rocks, shells, bottle caps, coins, etc. may be embedded with this product also. Allporous objects must be sealed first with a good coat of epoxy. If the objects are not properly sealed, they will releasetiny air bubbles which will form around the object during the flood coat. Placement of these objects may be donebefore you apply the first seal coat or they can be placed into a seal coat using it as glue to hold them down. Makesure that your seal coat completely surrounds the embedded objects so that when it hardens they are secured to yoursurface and do not float up into the flood coat. You will want to wait 24 hours before pouring the flood coat if you areusing the seal coat as a glue. This will allow the seal coat enough time to harden. If you are not placing objects in theseal coat, then they must be glued down or they can float up into the flood coat. Most regular glues will work fineexcept for hot glue sticks. In that instance you will pour the flood coat 4 hours after the seal
Question:	What about wood expansion/movement? Once the wood is imbeded in the epoxy, will it continue to expand/contract causing the epoxy to crack
Answer:	I coated the wood I embedded and the wood trim before I poured. Keeps the air bubbles from surfacing and the wood from expanding
Question:	Is this product fda compliant
Answer:	From their website and blog dated sept 10, 2017.... The short answer is, yes. Once Pro Marine Supplies Table Top Epoxy has cured it becomes safe, per FDA code, 21CFR175.300 which states "Resinous and polymeric coatings may be safely used as the food-contact surface of articles intended for use in producing, manufacturing, packing, processing, preparing, treating, packaging, transporting, or holding food" and can be used as a "functional barrier between the food and the substrate" and "intended for repeated food-contact use

Product features

Beautiful and Versatile, Crystal Clear Finish...Every Single Time!

High Gloss & Durable

High performance and Crystal clear! Produces a tough, high gloss, water and scratch resistant coating.

Versatile

Can be used for a wide variety of applications, art, and home projects.

Food Safe

Food Safe formula for artistic items used around food, such as trays, tumblers, and glassware.

Easy 1:1 Self Leveling Formula

Use our product with ease, featuring an easy self leveling 1:1 formula.