11 best gizmo dorks kindles

Product description

Gizmo Dorks ABS filament is made of top notch pure ABS resin. Our ABS resins are of the highest quality and produced with the utmost purity. ABS, Acrylonitrile Butadiene Styrene, is a favorite filament among 3D printer users because it is light weight and durable. ABS is a hard strong plastic with some flexibility when compared to PLA. It is also soluble in acetone, and it can be easily sanded and machined. ABS is one of the most widely used plastics in 3D printing and for good reason. The filament extrudes easily and smoothly with very little stringing or oozing. ABS does cool and shrink after extrusion, so it must be printed on a heated bed and preferably within an enclosed-case.

Color changing filament is a special filament formulation that changes color when heat is applied. When the temperature of the plastic rises above approximately 88 F, the filament will change to another color. This also means that the plastic will change colors simply by touch such as when holding it in your hand. When the temperature drops down below 88 F, the filament changes back to it's default color.

• Extrusion Temperature: 225 - 250 C
• Heated Bed: 80 - 110 C
• Diameter: 2.85mm +/- 0.03mm
• Net Weight: 200 grams

Colors available in 200g size

• Standard - Black, Blue, Glow in the Dark, Green, Grey, Orange, Purple, Red, Transparent, and White
• Heat Color Changing Colors - Blue to White, Green to Yellow, Gray to White, and Purple to Pink
• Black Light Reactive Colors - Fluorescent Yellow

Gizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to try the filament quality and color before committing to a larger 1 kilogram spool. It's a perfect size to sample!

• ABS (Acrylonitrile Butadiene Styrene) 3D printer filament vacuumed sealed with desiccant
• Extrusion nozzle temperature: 225 - 250 C; Recommended to use a heated build platform
• 2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm)
• Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5"
• Filament color is purple at room temperature and pink when heated above 88F. Filament color returns back to purple when cooled below 88F.

User questions & answers

Question:	Approximately how many feet are on this roll
Answer:	It fit my 8 year old Grandson with room to spare. I could wear the helmet.

Product description

Gizmo Dorks PLA filament is made from the highest quality virgin material. PLA, Polylactic Acid, is created from processing a number of plant products. PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. PLA is a more earth friendly plastic and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. PLA can be sanded and machined. PLA has a lower melting temperature compared to ABS. As a material, PLA has much less warping versus ABS. Additionally, a heated bed is not required to print it. PLA generally enjoys sharper details and corners compared to ABS without the risk of cracking or warping. PLA can also be printed at higher throughput speeds.

• Extrusion Temperature: 190 - 225 C
• Heated Bed: Not required but recommended at 60 C
• Diameter: 1.75mm +/- 0.03mm
• Net Weight: 5 kilograms
• Available Colors in 5kg Size: Black, Gray, White

Gizmo Dorks has proudly released this filament with a net weight 5 kilograms. The larger amount of filament allows continuous prints without the need to swap out spools. It's perfect for larger builds.

• PLA (Polylactic Acid) 3D printer filament vacuumed sealed with desiccant
• Recommended Nozzle Temperature: 190 - 225 C
• 1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm)
• Net weight: 5kg / Spool Diameter: 11.75" / Spool Width: 6.25" / Spool Hub Diameter: 1.25"
• PLA filament is compatible with various 3D printers such as the Monoprice Maker Select, Printrbot, Robo 3D, and many more!

User questions & answers

Question:	What is the diameter of the spool? and what is the texture of the pla after it has been printed? is it shiny or matte
Answer:	It's one sizes fits all for kids maybe 7 and under. If was a little loose on our grandson that was 5. The two that are 3 it very loose.The chin strap helps. It's a great helmet and jersey. The 3 grandsons love them.You can maybe modify it by adding pads. For the price and the quick delivery you will be very happy.

• PLA (Polylactic Acid) 3D printer filament vacuumed sealed with desiccant
• Recommended Nozzle Temperature: 205 - 225 C; Filament diameter - 1.75mm
• Net weight: 200 grams / Spool Diameter: 6" / Spool Width: 1.5" / Spool Hub Diameter: 2.25"
• PLA filament is compatible with various 3D printers such as the Monoprice Maker Select, Lulzbot, Flash Forge, and many more
• Color pack contains 4 spools, each spool contains 200g of filament. Colors: Blue, Green, Orange, Red

User questions & answers

Question:	Do you have other colors for the 200g pla 1.75mm? looking for yellow and be interested in other colors
Answer:	FYI, these roll, I purchased in April, have become brittle. Not sure if its moisture in the plastic, but just letting you know.
Question:	are these individualy sealed or not, if i open one can i keep the rest sealed
Answer:	Yes, they are individually sealed.
Question:	How many feet of filament is on each spool
Answer:	There is approximately 67 meters on each spool.
Question:	Are gizmo dorks pla food safe
Answer:	The PLA is not certified as food safe. Regardless of the type of filament that is used, 3D printing that uses FDM technology generally is not safe for printing food safe parts. There are many reasons for this. One main factor is because bacteria can build up in the small gaps that is created in between the layers that are printed. Another reason is because typical stock nozzles are made out of brass, which contains lead.

Product features

PLA Filament

Polylactic Acid (PLA) is created from processing a number of plant products, it's considered the greener plastic compared to ABS. Since PLA is derived from sugars, it gives off a semi-sweet smell when heated during printing. This is generally preferred over ABS filament, which gives off the smell of hot plastic.

PLA is stronger and more rigid, which generally produces sharper details and corners compared to ABS. The 3D printed parts will feel more glossy. The prints can also be sanded and machined. PLA has much less warping versus ABS, and thus a heated build platform is not required. Because a heated bed plate is not required, many users often prefer to print using blue painters tape instead of kapton tape. PLA can also be printed at higher throughput speeds.

Please store PLA plastic filament in a dry cool space. Absorption of moisture can cause bubbles to form because PLA reacts with water at high temperatures.

• 1.75mm diameter, 1kg net weight, HIPS Filament
• Filament Roundness: +/- 0.07mm
• Filament Diameter: +/- 0.05mm
• Recommended Print Temperature: 210 - 230°C, depending on printer model
• Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer

User questions & answers

Question:	Can i make replacement model parts and use the "ultra thin model cement" solvent to glue them together
Answer:	No
Question:	What chemical should i use to disolve this that won't effect the abs
Answer:	Yes
Question:	what bed surface and temp should be used
Answer:	Maybe a large...? That way if it’s a little big he can grow into it. I bought the 49ers gear for my son last Christmas (which he was 2 years at the time) so everything is big on him. But he wears the helmet almost everyday!
Question:	Is it food safe
Answer:	Hello! the measurements are as follow. Waist 22"-25", Chest 25"-29", and height 48"-54".

Product features

HIPS Filament

High Impact Polystyrene (HIPS) 3D Printer Filament share many of the same printing characteristics and qualities as ABS. It has comparable strength and durability. The main difference is HIPS filament dissolves in D-limonene (acetone is used to dissolve ABS). Therefore, HIPS filament is commonly used as a supporting material especially in conjunction with ABS filament.

When printing using an FDM 3D printer, sometimes there are issues with objects with large overhangs or bridging. This is where printing with a dissolvable material such as HIPS filament really shines. Using a dual extruder printer with HIPS and ABS filament can produce complicated objects with the HIPS providing support for the ABS. Dissolving HIPS filament in a Limonene bath will leave behind just the ABS filament printed sections.

Product description

Gizmo Dorks is now pleased to introduce low odor ABS that eliminates the nasty foul smell emitted during 3D printing. For all of the great mechanical characteristics of ABS, it is known to give off a pungent smell during extrusion. Low odor ABS now gives you all of the wonderful ABS attributes while eliminating the smelly fumes.

ABS plastic has always been a great thermoplastic to use in manufacturing and 3D printing for various reasons such as strength and durability. It's why so many commonly used products are made using ABS such as Legos. It has a high glass transition temperature to reduce deformation, but it is also low enough to be safely attainable with standard 3D printers. ABS is a hard strong plastic with increased flexibility when compared to PLA. It is also soluble in Acetone, and it can be easily sanded and machined. Being one of the most widely used filaments in 3D printing, ABS extrudes easily and smoothly with very little stringing or oozing. ABS does cool and shrink after extrusion, so it must be printed on a heated bed and preferably within an enclosed chamber.

• Extrusion Temperature: 225 - 250 C
• Heated Bed: 80 - 110 C

After many requests for a smaller sample spool, Gizmo Dorks has proudly released this filament with a net weight of 200 grams per spool. The smaller weight spool allows users to try the filament quality and color before committing to a larger 1 kilogram spool.

• Uniquely formulated to be virtually smell free while 3D printing
• Low odor ABS prints are high in strength and durability while providing for maximum impact resistance.
• 200 gram net weight is the perfect sample size to try out filament
• Nozzle temperature range 225 - 250 C; filament diameter of 1.75 mm +/- .03 mm
• Spool dimensions are 6 inches by 1.5 inches with a 2.25 inch spindle diameter; the net weight of the filament is 200 grams

• 3mm diameter, 1kg net weight, PLA Filament
• Filament Roundness: +/- 0.07mm
• Filament Diameter: +/- 0.05mm
• Recommended Print Temperature: 200 - 210°C, depending on printer model
• Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer

User questions & answers

Question:	Can anyone specify the exact color of the dark blue? any scale (pantone, hex, cmyk etc). i am looking for a specific blue
Answer:	No you can not.

Product features

PLA Filament

Polylactic Acid (PLA) is created from processing a number of plant products, it's considered the greener plastic compared to ABS. Since PLA is derived from sugars, it gives off a semi-sweet smell when heated during printing. This is generally preferred over ABS filament, which gives off the smell of hot plastic.

PLA is stronger and more rigid, which generally produces sharper details and corners compared to ABS. The 3D printed parts will feel more glossy. The prints can also be sanded and machined. PLA has much less warping versus ABS, and thus a heated build platform is not required. Because a heated bed plate is not required, many users often prefer to print using blue painters tape instead of kapton tape. PLA can also be printed at higher throughput speeds.

Please store PLA plastic filament in a dry cool space. Absorption of moisture can cause bubbles to form because PLA reacts with water at high temperatures.

• MADE IN THE USA: Single 1mm thick sheet installs quickly on top of existing flat build platforms (e.g. borosilicate glass)
• ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry.
• REMOVE FILM FROM BOTH SIDES BEFORE USING: Blue protective film guards against scratches during shipping and handling.
• Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results
• Sheet can be easily cut down to desired size by scoring with a utility knife

User questions & answers

Question:	Will z-probing with the nozzle (as in a piezo-sensor setup) damage pei
Answer:	Regardless of the filament type that you choose, 3D printing, in today's standards, is not typically food safe. A 3D printer lays down lines. These lines are not perfectly flat and bacteria can grow in these cracks. Additionally, brass nozzles used in the hot end of a printer may contain lead.
Question:	What's the best way to cut this stuff? I have a 220x270 print bed and no one carries it in that size
Answer:	The spool is just shy of 12 inches or 300mm in diameter and 5.25 inches or 135mm wide. It has a somewhat shiny finish when printed. I am on my fourth spool (all three colors in the 5KG size) of their pla and have been very pleased with the results.
Question:	Does anyone have an stl file for that awesome print pictured in the description
Answer:	The approximate length is 95 feet.
Question:	I have a CR-10S with a glass plate, would this sit on top of the glass plate or on top of the heated bed directly
Answer:	(Kids) Medium fits a 5 to 6 yoa child. Says it on the tag. I bought it for my 5 yoa son. He's 6 now and it still fits. Size (Youth) are for bigger kids 8 and older. So the small would be to big for your child if they're under 8 yoa.

Product description

Installation

The Polyetherimide (PEI) sheet comes with 3M 468MP adhesive already laminated to the PEI. Apply the PEI with pressure and at an angle to prevent and minimize air bubbles. Once applied set the print bed to 60C and apply pressure evenly across the PEI in a sweeping fashion to firmly set the adhesive. Please use a towel to avoid getting burned. Level the bed and set the height of the nozzle before printing.

If PEI is installed to the top surface of a bed sandwich (a build plate with multiple layers), it is recommended to install PEI on top of borosilicate glass.

Use

Heat the bed to the desired temperatures for printing (60 C for PLA and 100 C for ABS). Depending on how thick your bed sandwich is, your set temperature may not be your surface PEI temperature.

Let the part cool and the print will be easy to release from the PEI surface. Parts are actually easier to remove if released before the bed becomes completely cold.

Leveling the bed is very, very important when using PEI. The first layer should be squished a little. PETG is an exception and doesn't like squished layers, in which case a Z gap should be used.

Maintenance

Clean in between prints with isopropyl alcohol. Acetone can be used instead of isopropyl alcohol, but must be used on a cold bed. Light sanding with 600 grit sand paper can be done after lots of printing to give the PEI sheet more life.

Compatibility

Build volume and bed size are not always the same! This PEI sheet precisely fits the following printers.

Creality CR-10 V2 / Creality CR-10S Pro / Creality CR-10S Pro v2 / Creality CR-X / And more! PEI can be cut to size by scoring with a hobby knife.

Dimensions

310 x 320mm (12.2 x 12.6 inches)

PEI thickness: 0.56mm (0.022 inches)

3M 468MP adhesive thickness: 0.13mm (0.005 inches)

• Made in the USA - Ultem 1000 PEI sheet installs quickly via the laminated adhesive on top of existing flat build platforms (e.g. borosilicate glass)
• Bubble free application - The 3M 468MP adhesive is already preapplied to the PEI; simply peel back the tape liner for quick adhesion to the bed
• Build Surface - PEI is the perfect no prep build surface which is endlessly reusable for multiple prints; clean with isopropypl alcohol between prints (or with acetone on a COLD bed)
• ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry
• PEI Dimensions: 310mm x 320mm x 0.56mm / Laminated 3M 468MP adhesive thickness: 0.13mm (0.005 inches) / Fits the Creality CR-10S Pro v2 printer and others perfectly

Product description

Gizmo Dorks PLA filament is made from the highest quality virgin material. PLA, Polylactic Acid, is created from processing a number of plant products. PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. PLA is a more earth friendly plastic and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. PLA can be sanded and machined. PLA has a lower melting temperature compared to ABS. As a material, PLA has much less warping versus ABS. Additionally, a heated bed is not required to print it. PLA generally enjoys sharper details and corners compared to ABS without the risk of cracking or warping. PLA can also be printed at higher throughput speeds.

Black Light reactive filament is a special formulation that enables the plastic to shine under UV light. This is commonly seen in bowling alleys that have a rock and glow atmosphere or at a roller rink that has black light neon skating. The black light reactive filament has all the benefits of typical plastic with the added benefit of glowing under UV light.

• Extrusion Temperature: 190 - 225 C
• Heated Bed: Not required but recommended at 60 C
• Diameter: 1.75mm +/- 0.03mm
• Net Weight: 200 grams

Colors available in 200g size

• Standard - Black, Blue, Glow in the Dark, Green, Grey, Orange, Purple, Red, Transparent, and White
• Heat Color Changing Colors - Blue to White, Green to Yellow, Gray to White, and Purple to Pink
• Black Light Reactive Colors - Fluorescent Yellow

Gizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to try the filament quality and color before committing to a larger 1 kilogram spool. It's a perfect size to sample!

Product description

Gizmo Dorks PLA filament is made from the highest quality virgin material. PLA, Polylactic Acid, is created from processing a number of plant products. PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. PLA is a more earth friendly plastic and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. PLA can be sanded and machined. PLA has a lower melting temperature compared to ABS. As a material, PLA has much less warping versus ABS. Additionally, a heated bed is not required to print it. PLA generally enjoys sharper details and corners compared to ABS without the risk of cracking or warping. PLA can also be printed at higher throughput speeds.

Color changing filament is a special filament formulation that changes color when heat is applied. When the temperature of the plastic rises above approximately 88 F, the filament will change to another color. This also means that the plastic will change colors simply by touch such as when holding it in your hand. When the temperature drops down below 88 F, the filament changes back to it's default color.

• Extrusion Temperature: 190 - 225 C
• Heated Bed: Not required but recommended at 60 C
• Diameter: 2.85mm +/- 0.03mm
• Net Weight: 200 grams

Colors available in 200g size

• Standard - Black, Blue, Glow in the Dark, Green, Grey, Orange, Purple, Red, Transparent, and White
• Heat Color Changing Colors - Blue to White, Green to Yellow, Gray to White, and Purple to Pink
• Black Light Reactive Colors - Fluorescent Yellow

Gizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to try the filament quality and color before committing to a larger 1 kilogram spool. It's a perfect size to sample!

Product description

The 3M 468MP sheet has a high performance 3M acrylic adhesive that bonds extremely well to plastic and metal. It performs well under hot/cold cycles and temperatures up to 400 F. The outstanding shear strength of the adhesive provides resistance against slippage and edge lighting. Commonly used to bond nameplates, signs, graphic overlays, etc. The 3M 468MP transfer tape is ideal for bonding PEI sheets onto 3D print beds. Well within most 3D printer's print bed temperature range, the 3M 468MP Adhesive Tape is the perfect solution for attaching a level and flat PEI sheet. Each sheet has a protective liner on each side of the adhesive. Simply remove the polycoated kraft paper to expose the double sided adhesive.

• Standard for applying PEI sheets or other print surfaces on to 3D printing build plates. Also industry standard for graphic attachment and general industrial joining applications.
• High performance acrylic adhesive performs well after exposure to humidity and hot/cold cycles. Heat resistance of up to 400 F. Great for 3D printing applications, since 3D printer heated bed temps remain within that range.
• Excellent shear strength to resist slippage and edge lifting. This is important when having a level and sturdy bond is required.
• Cut to size for easy application with no mess. Peel off the polycoated kraft paper liner when ready to use, and apply to clean surface.
• Double sided adhesive tape is great for adhering, bonding, mouting, holding, and attaching PEI to print beds.

User questions & answers

Question:	How difficult is it to remove/replace a PEI sheet that has been adhered with this tape sheet
Answer:	It is almost exactly the same color as the photo...
Question:	Is it clear, I want to stick two pieces of clear polycarbonate (like a greenhouse) together
Answer:	Hi Ryan - Not sure which solvent is the ultra thin model cement glue. It may work. Do you have a brand name or somewhere we can see your glue? I believe most thin cement glues are used for polystyrene plastic. HIPS filament does fall under this category, but again I would like to see what cement glue you are using.
Question:	Is this adhesive the same as what's sold on rolls of 1/4" and 1/2" tape
Answer:	I used 100% D-Limonene Citrus Solvent Oil 1 Gallon (by Pro Supply Outlet) that I got on Amazon. It worked for me with an overnight soak and had no noticeable effects on the ABS. You do need to be careful what the container you put it in to soak is made of. A big Disney souvenir plastic glass was fine. A Solo cup, not so much.
Question:	Is this skin safe? Like could you use this to make body stickers
Answer:	HIPS filament prints just like ABS. ABS can print on a variety of surfaces such as glass, glass with glue, kapton tape, PET tape, blue tape, PEI, and more. 110 degrees is a good bed temperature.