13 best sla printer

• Fast Printing and Longer Lifespan: Creality LD002H lcd resin 3d printer uses a 6 inch monochrome LCD of 2K HD 2560x1620 resolution, only taking 1-4s/layer exposure to cure resin, which could significantly increase your printing efficiency and save your time. Moreover, monochrome LCD has a much longer lifespan and stable performance during long-time printing.
• Ultra Accurcy Printing: Creality LD002H sla 3d printer equipped with a UV integrated light source module and upgraded transmission system, working together with 2K mono LCD, the light source can reache 8000uw/cm2, which greatly improve the printing precision and details.
• Air Filtration System with Activated Carbon: LD002H resin printer built-in air filtering system. There is a small box at the rear of the print chamber containing a pouch of activated carbon, which can absorb the fume of the exposed resin and offer you a refreshing printing experience.
• CHITUBOX Slicing Software: This resin 3d printer installs the latest version of CHITU BOX Slicing Software, which supports one-key to add the model support and adjust the modeling size, easy to achieve all functions you want.
• Easy to Operate and Level the Print Platform: LD002H lcd 3d printer adpots user-friendly 3.5 inch full-color touch screen UI design interface can monitor real-time printing information, easy to operate. Lower the print platform and keeping only a distance of a piece of paper, then lock the leveling nut to finish the leveling, saving much time than before.

User questions & answers

Question:	Where can I get a replacement screen
Answer:	If your printer has any issue, please contact with the seller. They can help you to fix your printer issue.
Question:	I am looking to purchase this printer very soon and wanted to know what is the recommend type of resin for this printer
Answer:	I have used only water washable resin for my own ease of not having to buy IPA. I believe any 3d resin will work, just depends on the purpose of the use.
Question:	In creality site they list the ld-002h as "2k monochrome lcd screen", is this the same version? cause i can't find any reference to mono screen here
Answer:	LD002H is 2k monochrome lcd screen and the resolution is 2560x1620.

Product features

Z-axis Linear Rail

Stability is the prerequisite to realize high print precision, the Z-axis linear rail ensures a high precision movement. A stable mechanical structure gives you refined results.

2K Monochrome LCD

Creality LD002H lcd resin 3d printer uses a monochrome LCD of 2K HD 2560x1620 resolution. It is four times longer in lifespan and two times faster in printing speed than the regular RGB LCD 3D printers, which means higher printing efficiency, more stable performance, and less maintenance.

High Quality and Durable

Sturdy structure of the full metal body and acrylic cover, not only beautiful, but also not easy to wear, have longer using life, which still looks like the new one even many years later.

High Precision and Resolution

Creality LD-002H 3D Printer uses a 2560x1620 2K HD masking LCD as to provide accurate printing.

• Air Filter: LD002R equipped with air filtering system. There is a small box at the rear of the print chamber containing a pouch of activated carbon, which can help to remove part of the stench of exposed resin from the air.
• Fast CHITUBOX Slicing Software: LD002R uses the latest version of CHITUBOX Slicing Software which gives you an extraordinary user experience. CHITUBOX takes only 1 minute to slice 30Mb .stl model files while the open-sourced slicing software would take up to 10minutes.
• Incredible Precision and Resolution: 30W Powerful UV light for fast printing, ensuring 4s per layer. LD002R also uses a 2560x1440 2K HD masking LCD.
• Anti-Aliasing: LD002R use an LCD screen to mask an image of a layer over a UV light source. Comprised of hundreds of thousands of pixels, each a little rectangle itself, this tech leaves a telltale sign of the edges of these pixels on the print surface. Often barely visible, this effect can be lessened through the use of a digital processing called anti-aliasing, which interpolates between these edges, smoothing the effect out.
• Easy to Operate: Easy to set up, easy to choose printing file and view print progress through an user-friendly 3.5'' full color touch screen. Level the platform by adjusting 4 hex screws — loosen them before dropping the plate, and it will align to the level of the screen. LD002R allows you to start printing job within 5 minutes after assembly. OFFICIAL SERVICES: Comgrow team provides you lifetime technical assistance and 24 hours professional customer service.

User questions & answers

Question:	The XY resolution is .075mm in the chart, but it's .045mm in the description, which is it
Answer:	I believe the .045 or .05 is in reference to the "Z" axis resolution. I forget how the "X" &"Y" resolution is calculated, but I believe its a calculation based on the masking LCD resolution.
Question:	will it resume print if loss of power? and also i did not recieve any snippers
Answer:	no you will have to completely start the print over with a complete loss of power. there are no snippers with the printer.
Question:	Anyone tried printing directly on the bed without supports? My print is getting layers in first 1mm squished. Tried leveling the plate. Doesn't help
Answer:	You're getting UV bleed through, since the first layers anchor everything to the plate your BOTTOM LAYERS will have an extended cure time that extra time allows UV to bleed through and cure resin around the open screen. It's not actually "squished" but more or less "Chonky" there is no way of fixing that if you are printing directly onto the plate except sanding it back down
Question:	What's the warranty on the products unit and lcd screen
Answer:	If you don't but it from Creality directly, they won't honor a warranty. I've had this model before and the screen cracks very easily. Went through multiple before I said enough and got a different resin printer.

Product features

Air Purification Function

LD002R equipped with dual fans for excellent ventilation, and applies activated carbon air filtration, thus able to effectively reduce the divergence of odor.

Fast CHITUBOX Slicing Software

LD002R uses the latest version of CHITUBOX Slicing Software which gives you an extraordinary user experience. CHITUBOX takes only 1 minute to slice 30Mb .stl model files while the open-sourced slicing software would take up to 10minutes.

Convenient Resin Vat Cleaning

Special FEP release film tightened from both sides, prolonging service life. Quickly remove residuces from the resin vat with the removal of release film.

Full Touch Color Screen

User-friendly 3.5'' full color touch screen. Level the platform by adjusting 4 screws, allows you to start printing job within 5 minutes after assembly.

Large Print Volume Infinite Creativity

Large print volume 119x65x160mm enables you to finish bigger and larger prints at a time. Unlock your creativity!

Off-line Printing

Creality LD002R has an integrated computer board for printing directly from USB. You don't need to connect it to the computer while printing. Simple and fast.

All-metal Body+CNC Aluminum

All-metal integrated machine body by CNC cutting technique strengthens the frame structure reduces vibration, and prints more smoothly.

Ball Linear Rails Stable Z-axis Movement

Ball linear rails ensure Z-axis to move steadily, eliminates riffles on final prints, producting out smooth surface and delicate testure.

Easy to Leveling

LD002R only need to loosen 4 screws, then lower the Z axis to connect with the LCD screen horizontally, and then tighten the screws to start the print job.

2K HD Masking Screen

LD002R is equipped with special high-strength tempered glass and integrated into the 2k lcd screen. During the printing process, the release film is smoother and more durable, and the printing area is 119*65*160(mm).

• ANYCUBIC Photon Mono LCD screen Adopts matrix parallel light source 15 pcs lamp beads, is able to carry out uniform exposure, improve the quality of models, Z-axis guide rail structure and stepper motor have better stability, with an accuracy of 0.01mm, it effectively eliminating layer patterns, It's a great 3D printer for printing games, movies, cartoon characters, miniatures, etc.
• Photon Mono 3D Printer's printing speed is 2.5X faster than the regular 3d printers, rapid prototyping greatly improved printing efficiency and saved more time, comes with a 6.08'' 2K Monochrome LCD and only takes 1.5 seconds per layer exposure to cure resin.
• Off-line printing function with size 5.11"(L) x 3.14"(W) x 6.49"(H) / 130 x 80 x165MM, Photon Mono resin 3d printer uses a removable one-piece transparent cover to make the internal space of the machine, and the printer can be set to stop printing immediately after opening the cover, Friendly use for beginners and good performance for the enthusiasts
• he transparent cover blocks up to 99.95% of ultraviolet rays with a wavelength of 405nm, can be effective high resin solidification rate and ensure your success printing, reduce wasting of resin, New photon mono uses One-piece FEP, which can be easier and quicker to replace
• All of our 3d printers provide one month free return and exchange, one year warranty (exclude consumable parts like LCD screen & FEP film) and lifetime technical support, If you encounter any problems, please feel free contact us

User questions & answers

Question:	Mine did not come with a resin sample. Are there no resin samples being shipped with the Photon anymore
Answer:	No computer needed. Everything is included
Question:	Would you suggest this printer for a first time 3d printer
Answer:	Amazon Customer Service, is where I would start, assuming it was fulfilled by them.
Question:	Is this a photon or photon s? will make a big difference to me
Answer:	Just a 220v 50/60Hz adaptor to USB 5VDC and 2 Amp rated, any less and it won't heat right.
Question:	i was going to get this printer, and saw mention of a dual-leadscrew conversion kit, where might I find that
Answer:	No. It's not. We found a power pack for it from another vendor that makes it more mobile.

Product features

ANYCUBIC Fast 3D Printer--Photon Mono

From Photon to Photon mono, we always hope to provide customers with better and more cost-effective machines. As a newer machine, Photon mono can bring you the pleasure of fast printing and save your maintenance cost.

We believe each of us deserve the freedom to make our ideas, creativity and imagination a reality. ANYCUBIC is committed to being one of the best choices for freedom to make.

Side by side with you, we know we will make it.

Faster Printing Speed

The fastest printing speed per hour of ANYCUBIC Photon Mono 3d Printer reaches 50mm/h, which is 2.5X faster than regular resin printers. Greatly reduce printing time and save your costs.

New Matrix Light Source

ANYCUBIC Photon Mono Resin 3d Printer uses 15 pcs lamp beads to make a new matrix parallel light source, which can spread the light source evenly and dissipate heat, and can well ensure the precision of the model during the printing process

Support Multiple Slicing Software

ANYCUBIC Photon Mono 3d printer supports the use of Photon workshop, Chitubox, Lychee and other common slicing software, to meet different usage habits as much as possible

2K Monochrome Screen

ANYCUBIC Photon Mono 3D Printer comes with a 6.08" Monochrome LCD with 2K HD resolution. It only takes 1.5 seconds per layer exposure to cure resin, and service life is 4 times than that of RGB LCD screen, saves material and costs.

Easy Replacement of FEP

Photon Mono's specific FEP strip steel ring, when replacing, only need to unscrew the screw, remove the old FEP film, replace it with a new one and tighten the screws. No special adjusting, simple and convenient.

UV-blocking Top Cover

The top cover blocks 99.95% of ultraviolet rays, which can reduce the influence of ineffective light during the printing process and ensure the model to be better cured.

Top Cover Detection

Photon Mono 3d Printer can be set to stop printing when the cover is opened. Just click the lock icon on the tool page to successfully set it up. If this is not needed, please cancel the setting under the same operation

High Quality Power Supply

All of ANYCUBIC 3D Printers power supply has UL certification, CE marking, and ETL certification. We ensure safe use.

• Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs.
• Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
• Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable.
• Safety Protected Power Supply: Only needs 5 minutes for hot bed to reach 110℃.
• Strict Test: Strict testing for key components before delivery and life-time technical supports available.

User questions & answers

Question:	I am looking to purchase a 3D printer as a gift for a beginner. Does anyone have any recommendations? Thank you
Answer:	My son is 15 and he handpicked this one as a gift. He doesn’t know that I’ve purchased it, but he was very adamant that this was the best one. If the recipient is very technically inclined, I think it would be a great fit. I’ve read tons of reviews and watched several on YouTube. Once it’s properly assembled ( does seem to take some time), then operation is suitable for a beginner (again, must be very technically inclined). My son did request a different type of filament that I also purchased on Amazon, because the included roll isn’t that great. I don’t remember which one I purchased, but it was about 20.00. He also suggested getting or building a table to sit it on, as you should not sit it directly on the floor. He’s making one to put beside his desk, but I’m sure any small table would do. I’m very excited myself to see it in action, but I guess I’ll have to wait until Christmas.
Question:	Does the creality ender 3 has the dual extruders like the bibo 3d printer
Answer:	No, but. You could upgrade it if you have the expertise
Question:	Hi. Purchasing for my young granddaughter. will I need to purchase anything else with the unit in order to use it christmas day
Answer:	You also need the filament sold on spools. It comes in many colors. The filament is the actual product that is used to make the 3D creation.
Question:	Seriously how difficult is the build
Answer:	It is very straightforward, but the downloadable PDF instructions leave a lot to be desired. I highly recommend using the top-rated "how to build" video, along with the PDF. Here is a link to that video: https://www.youtube.com/watch?v=me8Qrwh907Q The video contains a huge number of hints which, having now completed my first 3D print, which was 100% successful, I can now fully appreciate. The video helps you get everything square, and makes sure that many minor adjustments which were not done perfectly at the factory, are tweaked just right.

Product features

Fully Open Source

Allow users to improve their printer upon the source code and share the changes within the community, resulting in an improved experience for all.

Branded power supply

Branded power supply and high-watt hot bed ensure fast heating to the printing platform.

Resume Printing Function

Ender 3 can resume printing after power outage or any other unexpected stoppage.

Upgraded Extruder Design

Greatly reduces the risk of clogged nozzle and bad extrusion.

High Precision Printing

Allow you to print high precision models, creat your own world.

Suitable gift for kids

This semi-assembled kit 3D printer is a perfect gift for kids, allow them to learn about the basic construction of 3D printers.

Ideal for STEM Projects

Invite imagination and innovation to student, help them discover the wonders of all the STEM fields.

• Great starter 3D Printer, Super easy to setup since it comes almost entirely preassembled, come with all the proper tools to get started, and just a single grub screw to level instead of having to level each corner. Great introduction to 3D printing
• With the Dual Rails, No worry about Z wobble issue; The dual Z axis rail make the bed very stable, this helps with the movement and to make sure the bed does not shift in the middle of printing; Better choice for large x-y objects with super-fine details
• Upgraded LED Array, With the UV upgraded lighting, it makes the resolution and the accuracy in your printing that much better and tighter than any other 3d printer in its class. The pitting in the skin, the hair and the texture in the clothing all can shows up
• More Function, 1 Touch screen, offer a new-Level use experience 2 Sanded Aluminum platform, greatly enhance adhesion make it more stable during printing 3 Double air filtration system, effectively reduce the divergence of odor 4 CE Certified Power Supply
• Photon Owner's Group, On Facebook as the people there are very knowledgeable and love to help with issues; They are eager to give suggestions and advice for everyone to get the best of their Photon and photon S

User questions & answers

Question:	Can the resin shipped with the system be used to print functional parts ( such as electronic enclosures) that will be in direct sunlight post curing
Answer:	It could, but the Resin it comes with is pretty brittle
Question:	Has anyone had problems with the usb drive? i have tried 6 different drive. i just opened a ticket with them
Answer:	I just received my machine and it was version 2.9.9, the current version is 5.0.2 and updated them to UI 2.6. I used a Sandisk Extreme USB 3.0 64GB to update it went smoothly and was pretty fast. I did reformat the drive fro FAT 32 with Disk Utility on the Mac.
Question:	Given the max work dimension are: 4.53"(L) x 2.56"(W) x 6.49"(H), can a single tray of the resin build a solid block of this max size
Answer:	No. A solid block filling the work area would take almost 1.25 liters of resin. The suggested max amount of resin in the vat is approx 75-100 ml So you would have to add resin 12 times or so in order to build that solid block :-)
Question:	The power supply that came with the printer seems to not be working correctly. What kind of power supply should I purchase to replace it
Answer:	The operating voltage is 110V / 220V.Your power adaptor is not work?You can try it with your computer's adapter first. It is universal.Please contact us,we will give you a replace.

Product features

ANYCUBIC Photon S - easy to set up

1. Build the print platform together
2. Set the printing platform (Leveling)
3. Build the resin container together

• And now you can enjoy the world of 3D printing

Upgraded UV Module

Adopt matrix UV lighting and 2560*1440 high resolution screen, which will contribute to uniform distribution of energy and enhancement of prototype precision.

Z-axis Dual Linear Rail Design

Maximally improve the stability of Z axis, and ensure its smooth surface and detailed reconstruction. Start with the details for a more enjoyful print experience.

Air filtration system

This 3d printer equipped with dual fans for excellent ventilation, and applies activated carbon air filtration, thus able to effectively reduce the divergence of odor.

Creative structure offers more easiness to leveling

• Lower the platform down to the screen,
• Feel the resistance when pulling the paper in-between,
• Tighten one screw
• Leveling doneLower the platform down to the screen,

Refined details and high degree of accuracy for excellent visual quality

• 【Intelligent Time Control】The LED time display enable you to control the curing time conveniently.
• 【Light Driven Turntable】The light driven turntable is able to absorb UV light to rotate without battery.
• 【Reflective Sheet】There is reflective sheet inside the cabinet which have the lights focused to get a better curing effect.
• 【Two 405nm LED Strip】ELEGOO curing box adopts two 405nm LED strip (14 UV LED light in total) in order to fast cure and evenly illuminate printed models.
• 【See-through Window】The see-through window not only assists you to observe the curing process, but also help keep the UV light away from leakage.

User questions & answers

Question:	Can you handle your print with bare hands after washing in ISP or do you need to cure your print first
Answer:	Please wear gloves even after washing your in ISP and while placing it in the curing chamber. Once fully cured, the print will be able to be handled without gloves.
Question:	Can this be used to cure resin on acrylic blanks
Answer:	It is in the 405nm range. Find out if that suits your resin.
Question:	tried to contact elegoo support and they are on vacation. is there supposed to be a capacitor to the right of the timer? all but the lights work
Answer:	No. The booths timer once set leaves the light on till it runs out. Plain and simple
Question:	Is this curing station only for elegoo printers or can it be used to cure a model from any printer
Answer:	This curing chamber can be used with any resin based printer. The UV wavelength is 405; as long as the resin used with other brand resin printers use the 405 wavelength it will cure the print fully.

Product features

Operation Instructions:

Please do not take away the box cover while the machine is working.

To avoid overheating of the curing cabinet, please do not use it for more than 40 minutes at a time.

After the model is printed, please clean and blow-dry the model before putting it into the curing machine.

The recommended ambient temperature is 0-40 degrees, and the ambient humidity temperature is 20%-50%.

If the model become yellow after curing, please adjust the curing time. Over curing will lead to a yellowing model.

• 【Fast Slicing Software】ELEGOO Mars comes with the latest version of CHITUBOX Slicing Software which gives you extraordinary user experience. CHITUBOX takes only 1 minute to slice 30Mb .stl model files while the open-sourced slicing software would take up to 10minutes.
• 【Resin saving and Better Printing】CHITUBOX allows you to hollow out your model before slicing which could save your resin dramatically during photocuring process. Equiped with 40W UV lights and using ELEGOO resin, you can get a better printing result.
• 【Smart and Convenient】3.5'' inch color touch screen equipped with the latest ELEGOO CHITUBOX 5.5 system makes it very easy for off-line printing. The build platform with steel ball balancing structure inside allows you to start printing within 5 minutes after assembly.
• 【High Precision and Resolution】ELEGOO Mars uses a 2560x1440 2K HD masking LCD as to provide accurate printing with XY axis resolution of 0.00185inches / 0.047mm
• 【Warranty and Service】We provide total one-year machine warranty (3 month warranty for FEP and 2K LCD consumable parts) and if you have any questions regarding product operation or software please feel free to contact us

User questions & answers

Question:	Where do i download the chitu box slicing software
Answer:	Pls. download it from here: https://www.elegoo.com/tutorial/ELEGOO%20MARS%203D%20Printer.zip
Question:	Why is this not available anymore
Answer:	It is very popular.
Question:	Has anyone experience horizontal cracks on the side of the UV cover after starting to use the machine? I start to see some but not sure why
Answer:	This can also be caused (assuming the covers are acrylic) by exposure to alcohol or even window cleaners with alcohol. This is a typical issue in acrylic fabrication shops. Points of stress (i.e. glued seams, heat polished edges, or bending) are the most sensitive.
Question:	Can this printer be used with Simplify 3D software for slicing or does it have to be the Chitu box slicer
Answer:	no it can't this is not about proprietary lock in. LCD Masking printers do not have "tool paths" (which is what slicers generate) they display a Masking Image on an LCD screen and permit UV light to "pass" where you want resin to cure. so the "file" is quite literally a GIF of sorts a set of "pictures" one image per layer. you can't use S3D or Cura or Slic3r because they literally "can't make" this kind of a file. there is no X or Y there is only "z" and "burn time" and "what image to display" the Chitu software is very good and this machine has an AMAZING feature wherein you can define bottom layers their burn time and normal burn time "ON THE MACHINE" dynamically. burn time too long or short? you don't have to reslice just change it right on the display. hands down the best UI I have EVER seen on a resin machine!

Product features

Mars Printer Tech. Specs

System: ChiTu L5.5 Series

Operation: 3.5 Inch Touch Screen

Slicer Software: ChiTu DLP Slicer

Connectivity: USB

Unique Industrial Design

With the unique steel ball design, you only need the Z-axis to return to zero, then lock the leveling screw to start printing.

Large Screen

Large colorful 3.5 inches touch screen. You can preview the model in SD card like you saw pictures in Windows OS. Real-time display printing process.

Speed

ELEGOO Mars comes with the latest version of CHITUBOX Slicing Software which gives you extraordinary user experience. CHITUBOX takes only 1 minute to slice 30Mb .stl model files while the open-sourced slicing software would take up to 10minutes. CHITUBOX allows you to hollow out your model before slicing which could save your resin dramatically during photocuring process.

Off-line Printing

The ELEGOO Mars has an integrated computer board for printing directly from USB. You don't need to connect it to the computer while printing.

Precision

ELEGOO Mars uses a 2560x1440 2K HD masking LCD as to provide accurate printing with XY axis resolution of 0.00185inches / 0.047mm

Sturdy Structure

Semi-assembled printer allows you to start printing within 5 minutes.

Sturdy structure of the all-aluminum fuselage plus acrylic cover, which is elegant and durable.

• Ultra Fast Printing Resin 3D Printer, ANYCUBIC Photon Mono SE’s printing speed is 4X faster than ANYCUBIC photon, comes with a 6.08'' 2K Monochrome LCD and only takes 1 second per layer exposure to cure resin, rapid prototyping greatly improved printing efficiency and saved more time. Mono LCD has a much longer lifespan,which is 4 times longer than RGB color screen and can print over 2000 hours
• High Precision and Strong Stability, This LCD 3d printer adopts new upgraded matrix parallel light source, able to spread the UV light more evenly across the LCD, working together with dual Z-axis guide rail structure, the printing details and precision are greatly improved and the quality of printed models will blow your mind, it's a great sla 3d printer for printing cartoon characters and miniatures, etc
• Sturdy Build Quality: Metal frame and CNC machined aluminum body makes Photon Mono Se a very formidable machine, with sanded aluminum platform, greatly enhance the adhesion between platform and prints and enables consistent printing success, and double built-in active carbon maximally absorb the fume of resin and offer you a refreshing printing experience
• WIFI Control and Easy Leveling: Photon Mono SE adopts Anycubic 3d app through wifi, which can remote control your print operations, monitor printing progress and adjust print settings at any time. Our resin 3d printer comes with 90% pre-assembled, and leveling can be done in few simple steps; 1, loosen the platform, 2, Click "Tools" - "Move Z" - "Home" icon and auto adjusts, 3, Tighten the screw on the right side of the platform.Then ready for your printing
• Better Heat Dissipation System, Anycubic Photon Mono SE 's UV Cooling System has exclusive UV heat dissipation channel, efficient cooling, improving printing quality and service life. All ANYCUBIC 3D printers backed with lifetime technical support and 24 hours professional customer service

User questions & answers

Question:	Is it possible to order a replacement lcd screen and glass for the photon mono se
Answer:	We currently don't have this screen in stock in our Amazon warehouse. If you have the Photon Mono SE printer and need to replace the LCD screen, you can contact our after-sales service team by submitting a help ticket in our website(http://support.anycubic.com/Login/template). Once confirming the problem, you can get a free replacment screen within warranty.

Product features

Photon Mono SE Resin 3D Printer

Technical Specifications

• System: ANYCUBIC Photon Mono SE
• Operation: 3.5 inch Touch Screen
• Software: ANYCUBIC Photon workshop / ChituBox
• Connectivity: USB
• Technology: LCD-based SLA
• Light-source: high-quality filament (wavelength 405nm)
• XY Res.: 0.051mm 2560 x1620(2K)
• Printing Speed: MAX 80mm/h
• Rated Power: 55W

Dual Z-axis Motion System

The ANYCUBIC Photon Mono SE's Z-axis is supported by dual linear rails, stepper motor and clearance nut combination which will dramatically improves stability while in motion and reduces the risk of shifted layering.

New Matrix Parallel Light Source

Photon Mono SE 3D Printer adopts new upgraded matrix parallel light source, is able to spread the UV light more evenly across the LCD. Greatly improved printing quality precision and quality.

UV Cooling System

ANYCUBIC Photon Mono SE 3D Printer's UV Cooling System has exclusive UV heat dissipation channel, efficient cooling, improving printing quality and service life.

High Quality Power Supply

All of ANYCUBIC 3D Printers power supply has UL certification, CE marking, and ETL certification. We guaranty safe use.

Brushed Aluminum Platform

Photon Mono SE updated the platform craft, significantly enhanced the adhesion between platform and prints, and reduced the printing failure rate.

3.5inch Touch Screen

ANYCUBIC Photon Mono SE 3D Printer uses 3.5 inch touchscreen with fully functional menu, the New UI is highly intuitive and responsive.

• Newest Upgraded and More Convenient: Newest Wash and Cure machine added lens to UV lamp beads, the light source intensity distribution is more uniform, and the surface of the model is smoother. With the 360° automatic rotating curing table and added bottom reflector, the bottom curing has no dead ends, so that the entire model is cured more thoroughly
• 2-In-1 Wash and Cure Station: Dual functions of cleaning and curing can not only remove most of the chemicals, settle scrubbing and mess issues, but also seriously streamline the whole post-processing. It's a professional solution to the messy clean up job of your fabulous prints and also helps reduce the clutter on your desk. 1-60min time adjustable, customize knob cleaning and curing time. Each layer of the 3D printer model can be better cleaned and cured according to your DIY needs
• Widely Compatibility: The ANYCUBIC wash and cure machine is a great addition to most type of regular resin printer, Compatible with most LCD/DLP/SLA 3D printers such as QIDI Shadow, NOVA, Mars series and other regular resin printers with similar build volume size as it does for photon series, this Wash & Cure machine has opened up a whole new world of 3d printing for you and greatly enhance your workflow
• Effective and Diverse Washing Modes: There is a propeller in the bottom of wash cure station, when work, it spins the solution like a little tornado and changes spin direction halfway through the wash , which creates the perfect flow to clean every inch of the print. 2 modes of Cleaning: 1. Basket washing, Remove the model and put it into the basket for direct cleaning; 2. Suspension washing, Directly hang the print platform on the basket or cleaning stand to clean, reducing exposure to resin
• Anti-UV Light Hood: The transparent cover of this wash cure machine can block up to 99.95% of ultraviolet rays with a wavelength of 405nm, thus able to be effective in high resin solidification rate; and this wash and curing box adopts sealed cleaning, which effectively prevents the cleaning agent from splashing and volatilization, and provides more safety.

User questions & answers

Question:	Is this unit required to use with the anycubic 3d printers
Answer:	no, it is not required. Just pay attention to the size of the bucket that came with this machine and make sure your 3d printed models are not larger than the bucket. You should be fine if you use any of those small size resin printers like Elegoo Mars, Mars Pro, Mars Pro 2, Phorzen sonic mini.....just to name a few.
Question:	Does the Elegoo Mars Pro build plate hook into this or will it need an adapter
Answer:	No! it does not fit Mars Pro's build plate. The build plate knob and the adjustable bracket come in contact with each other just a bit, but the diameter of the build plate screw is too big for the 2 adapters that come with the Anycubic unit. I will put both of the parts in a vise and reem them out with a drill to widen it enough to accept the build plate screw. Otherwise just remove the print and put it in the basket.
Question:	Can you put the build plate from the anycubic photon mono x in it or do you need to take your work off the build plate and wash it separately
Answer:	I don’t have the mono X but both the Photon and Photon mono SE both fit in along with the build just fine. The hit has an adjustable height bracket to hand the build plates so they are immersible in the IPA capacity of the provided container.
Question:	Mine spins the platform for a half second, stops, then starts constantly beeping. Anyone have this happen
Answer:	there's an IR light in the back, if you don't have the lid on the right way (there's a white square on one side) to trigger that IR sensor it won't work. It's a safety measure.

Product features

ANYCUBIC Curing and Washing Machine

Specifications

Machine: Curing and washing

Control Method: Digital tube, LED indicator, Control knob

Power: 25W

Input Voltage: AC 110/220V, 50/60Hz

UV Lights: 405nm

Curing and Washing Time: 1-60min

Max Model Size for Washing: 120mm(L) *74mm(W) *165mm(H)

Max Model Size for curing: 140mm(D) *165mm(H)

Machine Size: 225mm(L) *235mm(W) *365mm(H)

UV Lamp Beads Upgrade

Lenses are added to the UV lamp beads, so UV light distribution is more uniform, model surface will cure more smoothly

Rotatable Curing Platform

the curing platform rotates 360 degrees which always has a perfect even cure when finished and ensure even coverage

Concise User Settings

The time can be adjusted: 1-60 minutes. Allows you to adjust the cleaning and curing time according to your specific needs

UV-blocking Top Cover

The use of a transparent cover can block 99.95% of ultraviolet rays and has a safety protection effect

Closed Cleaning

able to be washed thoroughly, and completely prevent the detergent from splashing, much safer

All-in-One Function

Dual functions of cleaning and curing is a professional solution to the messy clean up job of your fabulous prints

Comparison after Use

After being cleaned and cured, the material properties of the resin are significantly improved.

• 【High Precision & Larger Printing Size】Orange 30 is a higher precision resin 3d printer, with built-in 2k LCD screen at 2560x1440 resolution and 47.25µm pixel size, offering bigger size of printing at 4.72 x 2.68x 6.69 inches; Improved solid linear guide and special slider design to enhance the accuracy and stability of Z axis.
• 【Uniform Matrix UV Lighting】Integrated with matrix UV LED arrays, Orange 30 provides better printing performance since the matrix illumination provides better uniformity, higher intensity and shorter time of curing.
• 【Easy Operation & Fast Slicing】 Full color touch screen. Real-time printing status preview. Easy leveling. Upgraded trough with scale, more convenient. LONGER self-developed slicing software, output 100M slicing file in 1 minute, 3 times faster. Smart support generation in one-click. Also supported by CHITUBOX.
• 【Fast Cooling & High Temperature Warning System】Temperature detection system included. The system will stop printing when temperature is too high. Equipped with high efficiency cooling system to improve lifespan of this 3D printer.
• 【Warranty and Service】NOTE: The printer comes without resin. 12-Month machine warranty and Lifetime Technical Support. High-efficiency and considerate community support on Facebook.

User questions & answers

Question:	What size FEP film should be ordered for the longer
Answer:	140x200mm Thickness 0.2mm
Question:	what do I use to rinse my prints and what happens if I dont
Answer:	use isoprophyl alchohol 90% or higher, or you can use denatured alchohol, acetone is harsh but it works, use those to wash away the resin, dip in and swish around for a cpl minutes then rinse in water. if you dont then the resin sits on the print and all the details will be covered when you cure it, also that wet resin is still toxic so its not safe
Question:	I’d like to print the jewelry, what’s the overall dimension of printing? Is it able to print jewelry
Answer:	Dear friend, Thanks for your interesting. This Orange30 sla 3d printer is with 120 x 68 x 170mm of printing size, bigger than others. With castable resin, you would print high precision jewelry models. If you have any operation question, welcome to join our fb group" longer3dprinter" to keep online communicating. Best regards Longer3d Official Team
Question:	What is the difference between this and the Orange 10? Just the size
Answer:	As far as I know, Orange 30 is the upgraded version of Orange 10. The printing size is bigger, it is 4.72 x 2.68x 6.69 inches. The precision is 2K 2560x1440, pixel resolution up to 47.25μm. I have printed some models, the details are super.

Product features

LONGER Orange 30 3d printer makes life better!

Orange 30 is built-in 2k resolution LCD screen, which will provide more details on the printing of miniatures.

With 10/25/50μm layer thickness resolution, Orange30 would print with a more smooth surface and high precision of models.

Upgraded industrial design and user-friendly system, makes Orange30 printer suitable for anyone, even though you have never used a 3D printer before.

2k High Precision

2K 2560x1440 high-resolution LCD screen, pixel resolution up to 47.25μm, ensures super fine and smooth printing.

Unifrom Matrix Light

Integrated with our matrix UV LED Design, Orange30 will provide better performance on illuminant uniformity, intensity and shorter time of curing.

Fast and Smart Slicing

Self-developed slice software (LongerWare), easy to operate, one-click generates supports, and the slicing speed is three times faster than other printers. And compatible with Chitubox.

Friendly Touch Screen Design

Easy to use the full-color touch screen, easy to select file printing and preview the printing status real-time.

Fast Cooling System

LONGER Orange 30 has upgraded the cooling system, shorten the cooling time, increase machine's using life.

Esay to Assemble and Use

Machine preassembled and easy setup, just 3 steps to finish and begin your printing.

• 【SLA 3D Printer】Entry-level UV light curing LCD 3D printer. Machine preassembled and easy setup. Rapid prototyping with high precision details. LCD printers have higher precision than FDM printers.
• 【24 Parallel LED Lighting】Compare to other printers(4 spotlights), this 3d printer uses 24 parallel LED lights. Improved printing quality, curing speed and substrate adhesion with parallel LED lighting and uniform lighting intensity distribution.
• 【Smart and Fast Slicing】LONGER self-developed slicing software. Output 100M slicing file in 1 minute, 3 times faster. Smart support generation in one-click, enhanced cross-link structure. Also supported by CHITUBOX.
• 【Easy to Use】Full color touch screen, preview and monitor print status in real-time. Easy leveling. Full metal body, Robust adhesion. Safety temperature warning system.
• 【Warranty and Service】NOTE: The printer comes without resin. 12-Month machine warranty (4.5'' LCD Screen and FEP film excluded) and Lifetime Technical Support. High-efficiency and considerate community support on Facebook.

User questions & answers

Question:	Is this printer compatible with a mac
Answer:	Yes, our slicing software supports Windows and Mac, and we can use our own developed software" LongerWare" (this will be easier to operate) or Chitubox software for slicing.
Question:	Is this printer have resume printing when it works for long time with high temperature? I want to be sure before try it
Answer:	Yes. This printer has a unique device that monitors temperature during the printing process, automatically pause or stop printing when the temperature exceeds limits, resume printing when temperature normalizes. Hope this to be helpful for you, you can contact us, we have 24hrs technical support.
Question:	How many 28mm miniatures would I get out of a 500mL or a 1000mL bottle of resin
Answer:	Assuming 28mm tall, 15 mm wide, and 7 mm deep, that gets you 2.625 cm^3. Assuming supports are about 1/4 the volume of the figurine, that’s 3.28 ml per figurine. 1000/3.28=305 figurines 500/3.28=152 figurines But 28 mm is miniscule. You won’t be able to see anything without a magnifying glass (though the printer can still handle it if you get the settings right)
Question:	What is the LCD resolution
Answer:	Orange 10 LCD resolution is 854*480 Pixel, LCD pixel size is 115μm, hope this to be helpful for you.

Product features

Why you need a 3d printer of LCD?

LCD Printer vs FDM Printer

-Precision. LCD printers have higher precision and can print models with greater details like miniatures and jewelry, while FDM can not.

-Ease of use. SLA LCD printers don’t require as much setup as FDM printers, easier to start printing. The software of LCD printers is relatively simple to use. Far fewer settings to adjust vs FDM printers.

-New Technology. As LCD new technology develops, LCD printers become more popular.

Do not miss LONGER Orange 10 3D printer which is Entry-level, Affordable, Easy to use, Better Printing Quality, and Full of Fun!

Uniform UV Light Design

Upgraded UV-LED Module, provide special optical path design, uniform distribution of energy, both contribute to enhance prototype precision, you can get a better printing result.

Resin Flow Back Design

The declined plate facilitates the resin flow back to the material vat. Prevent drip out and waste. Metal printing platform is not only beautiful but also not easy to wear, has longer using life, which still looks like the new one even many years later.

Full Touch Color Screen

This 3d printer equipped with 2.8-inch colorful touch screen, you can preview model, choose file etc, which makes operation easier and convenient. It supports offline printing by transmitting printing job file data from the TF card (8G comes with the printers).

Standarded Printing Size

The printing size is 3.86 x 2.17x 5.5 inch,which is designed accordding to the market survey, can meets the needs of more than 90% customers, especially suitable for teaching, amateurs, designer and artists etc.

Smart Support and Fast Slicing

Automatically detect suspended parts with one button and add cross-linked grid support, which is more stable, to increase the success rate of complex models printing. Professional slicing software output 100M slicing file in 1 minute, 3 times faster than open source solution.

High Temperature Warning

This sla 3d printer equipped with temperature detective, when the UV LED temperature is abnormal, it will auto pause, and resume print after back to normal, provide a safe printing environment and save materials.

Product description

The MP Mini SLA 3D Printer produces higher quality, more detailed, and smoother prints when compared to filament-based 3D printers. It uses an LCD display to cure layers of UV photosensitive resin with layer heights as small as 35 microns. The printer is ready to print right out of the box. Simply pair it with your Wi-Fi network and add the included sample resin. It has a built-in Web UI, which can slice and print model files without the need for a separate software package. It automatically calibrates and levels the print platform whenever a print is started, ensuring a perfect print every time.

• UPDATED: Improved Z-axis lead screw and rail system prevents wobble | More robust Z-axis couple prevents over torqueing and helps keep the print surface steady while printing.
• UPDATED: The ball joint that connects the bed to the z-axis is now held tighter in place and will not slip while leveling or printing |  Build surface improvement helps prevent failed prints
• AUTO LEVELED BUILD PLATE: Part of the difficulty of resin prints is making sure that the build plate is level with the vat. This printer has a unique system that automatically levels the build plate for you.
• ON-BOARD PROFILE MANAGEMENT: The printer supports multiple, on-board profiles, allowing you to quickly and easily load the proper settings for your print. The different profiles can be used to change the curing time, lift height, and other critical print parameters.
• SIMPLE WI-FI WEB UI: Slice, print, and manage model files without the need for a separate software program using the convenient, built-in Web UI. You can print directly from the Web UI over your Wi-Fi network or save the files to a microSD card for permanent storage and traditional printing from the microSD card.

User questions & answers

Question:	What is the longevity of the resin vat
Answer:	I have 253 hours on mine, still looks good. Just clean well after print and replace FEP when required and it will last
Question:	what size of FEP is used
Answer:	I use 200x140 and trim excess
Question:	Is this the V2 version with the updated coupler and z-axis
Answer:	no. v1
Question:	What is the build area? It isnt mentioned in the listing - critical information to buy a 3d printer
Answer:	Maximum Print Size 4.6" x 2.6" x 4.3" (118 x 65 x 110 mm)

Product features

MP MINI SLA

Produces higher quality, more detailed, and smoother prints when compared to filament-based 3D printers. It uses an LCD display to cure layers of UV photosensitive resin with layer heights as small as 35 microns. The printer is ready to print right out of the box. Simply pair it with your Wi-Fi network and add the included sample resin. It has a built-in Web UI, which can slice and print model files without the need for a separate software package.

AUTO LEVELED BUILD PLATE

Part of the difficulty of resin prints is making sure that the build plate is level with the vat. This printer has a unique system that automatically levels the build for you.

PARALLEL LET ARRAY

The 57W parallel LED array allows the curing UV light to be distributed evenly for high quality prints

ON-BOARD PROFILE MANAGEMENT

The Printer Supports multiple, on-board profiles, allowing you to quickly and easily load the proper settings for your print. The different profiles can be used to change the curing time, lift height, and other critical print parameters

• [Wash and Cure]Creality wash and cure machine UW-01 support printing model washing and curing. The electromagnetic propeller moves to stir the alcohol and wash the uncured resin. When the printed objects have soft texture. The UV light treatment gives them excellent surface properties.
• [Large-Size Washing Container] The UW-01 comes with 190x154x200mm Sealed washing container, it supports larger size models for cleaning; With a sealed container and lid, it supports larger size models for cleaning; With a sealed containder and lid, it avoids cleaning solution volatilization and also stores the cleaning solution for the repeated use.
• [Flexible Washing Method] With three-gear speed mode, it includes washing and curing; The washing and curing time has 2-90min optional. Delicate models come from the curing and washing.
• [Double-Row UV Lamp Beads& 360°rotating platform] The curing size of UW-01 is 165*200mm. It built-in LED beads(18 pieces of UV LED lights), the machine is compatible with most of resin printers; The double row 9-bead desin with a higher irradiated area realizes quick curing and even irradiation for the larger model. Further more, the UW-01 adopts 360° curing tray with magnetic force andd reflective mirror make full use of the light source, which cures the model all the angle.
• [LED HD Touch Button]The UW-01 Equipped with touch-sensitive buttons and LED large-size screen, the machine gives you a premium experience. Once the machine cover is removed during the curing process, it will immediately suspend the curing, which avoids light source glare and reduces light pollution.

User questions & answers

Question:	Can the jewelry model be printed with high resolution
Answer:	I’m using end temp 215 bed temp 60 and having no issues with it. Prints really smoothly.
Question:	How well does the filter work, do you still need a lot of ventilation? New to resin 3D printing
Answer:	If i am not mistaken and you can thank your state for this one. Seven localities in California have banned the use of PLAs.
Question:	This item lists for $299 on creality site, $269 on sale right now(3/19/2020). what justifies the higher price? (toauto is the current seller
Answer:	While PETG is generally food safe (depending on the color - metallics can be iffy), I wouldn't 3D print a pet toy, due to the tendency for 3D prints to break into thin filaments under the sort of pressure that animal teeth can impart.
Question:	Is it required to use Creality resin or can I use other brands
Answer:	Yes, they are each 1kg spools. Unfortunately, their claim of no stringing or zits is totally false. I had very bad stringing on my Kingroon KP3 with this filament. To be honest, the only brand that seems to work well for me is CC3D.

Product features

CREALITY UW-01 Washing and Curing Machine

We are the officially authorized seller of Creality 3D. We are devoted to provide high quality and economical 3D printers/3D printer accessories, excellent after-sales service to all customers.

For any further assistance,or any professional suggestions to the machine, our after-sales technical team will provide you with detailed solutions within 24 hours.

Self-adjustable Bracket

The water level to wash the model depends on the the washing container size and model size.

Flexible Wash Method

The model can be washed separately in the washing basket or tegether with bottom plates.

360° Specular Reflections Curing Rotatong Platform

360° curing tray with magnetic force and reflectiive mirror make full of the light source, which cures the model all the angle.