13 best sainsmart 3d printers

User questions & answers

Question:	Is this printer upgradable from 2k to 4k lcd if sainsmart 4k lcd becomes available
Answer:	I doubt a change to 4k would be worth it. I can't see much of a different. I own 2 of these printers and the icd will start going out after a couple hundred hours. Will start getting holes in your prints. The printers that have a mono screen and 4k claim to last 2000 hours. REX
Question:	your 2k lcd is 8.9 inches, compared to most other's 2k lcd that are 5.5 inches, does this mean the print will have less detail
Answer:	Yes but I can't see very little lost. Speed and detail are no problem. How long the ICD lasts is very . REX
Question:	Are replacement LCD's available for this printer
Answer:	Yes, we will list it on Amazon soon.

Product features

Large Build Volume

With a build volume of 120mm x 192mm x 250mm, th e Kumitsu KL9 offers exciting possibilities for your creative ideas, and allows you to print them in one go.

Easy to Assemble

The Kumitsu KL9 Adopts a modular design that can help you get the printer assembled with ease, saving you time and efforts.

One Piece Aluminum Resin Vat and Build Plate

Both the aluminum resin vat and build plate are produced in one-piece, enabling greater durability, and with the upgraded leveling nut on each side, replacing the FEP Film is no longer a headache.

Sturdy Linear Actuators

The Z-axis of the KL9 has a thick aluminum alloy structure, and in combination with the sturdy linear actuators, allowing you to print with accuracy and smoother finish.

Dual Position Platform

With easy switch between Print position and Drain Position, you are able to drain away a lot of the resin before you wash them in alcohol, which allows for easier cleanup.

Enhanced Cooling

The KL9 has enhanced cooling system that enables the LCD Screen to last longer, allowing you to print fast with higher volatility rapid resin without having to change screens as often.

Parallel Light Source

Uniform light everywhere the screen it lit up, those uniformly distribute lights makes it possible for your prints to cure at similar light intensity, ensuring the quality of prints.

Wide Application

Miniatures, high quality parts, or detailed models, the KL9 handles all of them with ease. Plus with its extensive volume, making it a very versatile resin 3d printing solution.

Product description

SPECIFICATION

• Fabric: 100% polyester
• Lining: 100% PVC
• Lining: 100% PVC
• Size: 73.5 x 61.5 x 53 cm (20.9'' x 24.2" x 28.9")

WHAT'S IN THE PACKAGE

• L1 Fiberglass rod x 4
• L2 Fiberglass rod x 4
• L3 Fiberglass rod x 4
• Mixed-angle bracket x 8
• Folding shed x 1

• Consistent Temperature: The SainSmart 3D Printer Enclosure reduces heat losses and prevents external factors that might alter your prints, keeping the printing area at a consistent temperature, delivering stable and smooth printing results.
• Noise & Dust Reduction: A enclosure helps to reduce the annoying fan noise while printing, making it more viable for home and school use. It also protects your printers from dust.
• Comprehensive protection: Using an enclosure makes it possible to contain the unfavorable fumes during printing and vent them outside when printing is done.
• Better organize your printing area: the enclosure is equipped with multiple tool pockets and holders on each side, keeping your printing area clean and tidy.
• With a large area measuring 73.5cm x 61.5cm x 53cm (20.9'' x 24.2" x 28.9"), this enclosure is compatible with Ender-3, Ender-3 Pro, Ender-3 V2, Ender-5 Pro.

User questions & answers

Question:	Does it have a fire rating
Answer:	I don't think so.
Question:	Does this work for the Tevo Tornado Printer
Answer:	I don't think so.
Question:	Will this tent work with the Artillery Sidewinder X
Answer:	I don't think so.
Question:	how deep is this, my closet is 23.5" deep, this says 24.2" deep, but is that with the straps and pouches, or is it the solid structure that deep
Answer:	24" deep for the solid structure,just measured it.

Product features

Consistently Great Prints

Keep your print area isolated from air currents, delivers you consistent print results.

Waterproof Fabric

Waterproof fabric provides resistance to water penetration, avoids accidental water damage.

Open Up More Possibilities

The enclosure helps you print demanding material with ease, which adds up flexibility to your project.

Wide Compatibility

With a volume measuring 73.5cm x 61.5cm x 53cm (20.9'' x 24.2" x 28.9"), this enclosure supports a wide variety of printers on the market, including Creality Ender-3, Ender-3 Pro, Ender-3 V2, Ender-5 Pro, CR-6 SE

Easy Assembly

Set up this enclosure usually takes up to 10 minutes, it is very easy to assemble.

Smooth Zipper

Selected zippers to provide smoother zipping

• Better Value: The Ender 3 V2 has the same 220 x 220 x 250 mm build volume as its predecessor, that's more reliable and easier to use.
• Enhanced Durability and all-metal frame provide the extra rigidity you need for consistently great prints.
• Upgraded power supply: Equipped with a new Meanwell power supply that delivers stable and consistent power for the better performance.
• Simple & Clear UI: redesigned for a better out of box experience.
• No Limits on your creativity - Compatible with most 3D Printer filaments, giving you the flexibility to create what you want.

User questions & answers

Question:	Can the ender units be connected via a usb or wifi to a computer ? I don't use cloud ( and my printer room not have net access unless wifi
Answer:	It connects via usb , or micro SD card. You can set up a raspberi pie to make it WiFi cabable and there are plenty of YouTube videos on that subject.
Question:	Is it covered by Creality manufacture warranty? For how long
Answer:	Hi, SainSmart offers a 1-year manufacturer’s warranty on all our 3D printers.
Question:	Will there be an auto level upgrade for the V2 like the earlier Ender-3's V1 and pro
Answer:	Yes, you can use the same auto level upgrade as the ender 3 and pro. There is actually plugs on the new motherboard for both auto leveling and filament runout devices. But, in order to take advantage of this feature you will have to do a firmware update. There are several videos on YouTube describing this in detail.
Question:	Does manufacturer have a fix for the plastic Z-axis motor mount causing slight mis-alignment of Z-axis screw which puts screw in bind
Answer:	I'm not sure about the manufacturer having a cure but there are several outside manufacturers who offer a fix. Some approach the situation with new motor mounts and some with top stabilizing bearing mounts of the Z- axis. I chose the latter and very pleased with the results.

Product features

Ender-3 V2: Brings your creativity to new heights

• 32-bit Board: Better data processing capacity, less firmware issues and more room for upgrades.

• MeanWell Power Supply: Thinner, quieter but all-around better unit delivers a more stable performance.

• TMC2208 Silent Drive: Brings down the noise level, suitable for home and school use.

• Filament Run-out Sensor & Resume printing support: Keep your 3D Printing objects uninterrupted, your print job will resume right where it left off.

New UI & 4.3 Inch Color Screen

With a 4.3-inch color screen and a redesigned UI that prioritize ease of use, the Ender-3 V2 is an ideal choice for beginners.

Silent Drivers

Newly developed mainboard, the Ender-3 V2 is now able to operate with fairly low noise.

Carborundum Glass Bed

Better adhesion when you need it, and easier to remove prints when cooled.

Easier Maintenance

Pre-installed belt tensioners make it even easier to keep your machine printing at its best. Easily adjust belt tension to maintain accuracy performance.

Extruder Knob

Swap filament in and out even easier.

Storage Toolbox

Forget where you put those tweezers or snips? Not anymore! Built-in compartment to store your 3D Printer essentials.

Product description

Overview



Ender-3 PRO is an upgraded version of Ender-3, boasts the same outstanding performance as the Ender-3, with upgraded

components and more extra accessories, if you are an experienced 3D printing enthusiast looking for an upgrade, look no

further. Ender-3 PRO will give you more printing fun than you will ever need.



WHY CHOOSE SAINSMART?



As an industry leader since 2010, SainSmart offers a 1-year manufacturer’s warranty on 3D printers, so you can rest assured

that your purchase is protected. Contact us for professional solutions recommendations and expect a qualified

response within one business day. Buy with confidence!



Machine Parameter:



Printing Technology: FDM

Printing Accuracy: ±0.1 mm

Nozzle Diameter: 0.4 mm

Layer Thickness: 0.1 to 0.4 mm

Nozzle Speed: 180 mm/s

Compatible Filaments: 1.75 mm PLA, TPU, ABS, PETG

Operating Systems: Windows, Linux, MacOS

Compatible Software: Pro/E, Solidworks, Siemens UX, 3DS Max, Rhinoceros 3D

Compatible Formats: .stl, .obj, .mpt, .mpf

Ambient Temperature: 5 to 40° C (41 to 104° F)

Nozzle Temperature: 255° C (491° F)

Heated Bed Temperature: 110° C (230° F)

Connectivity: USB 2.0 connection, SD Flash

Power Source: AC 100-265V 50-60Hz

Overall Size: 440 x 410 x 465 mm (17.3 x 16.1 x 18.3”)

Auto Resume Print: Yes

Spool Holder: Yes



WHAT'S INCLUDED?



1 x Ender-3 PRO 3D Printer (Some parts need to be assembled)

1 x Tool Box (50g Testing Filament Included)

1 x Screw Accessories Box

2 x MK8 Black Silicone Cover

4 x 0.4mm MK8 Nozzle

1 x PC4*M6*Pneumatic Head

• 【New Version】 Ender-3 PRO is an upgraded version of Ender-3, comes with Mean Well power supply and new platform sticker, also redesigned the aluminum extrusion. The Ender-3 PRO boasts the same outstanding performance as the Ender-3, upgraded components make Ender-3 PRO more stable, durable and easier to operate.
• 【Superior Printing Surface】 A new state of the art “C-MAG” magnetic sticker is designed for Ender-3 PRO, it is completely removable, flexible and can better adhere to the platform. Once the model is finished printing, remove the magnetic upper from the lower and bend or flex the print surface to watch the model effortlessly pop off the printing surface.
• 【Mean Well Power Supply】 We adopt the Mean Well power supply, which is produced by the listed company with mature technology, and it meets all the needs of fast heating and long-time 3D printing. The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
• 【More Stable】 Redesigned with a much more sturdy, 40x40 aluminum extrusion for the Y-axis base. This provides stability for the printing process, leading to a better print quality.
• 【Enriched Accessories】 It must be amazing that more useful accessories included in our package. Extra parts can save your time while you really need, also cost-effective.

User questions & answers

Question:	Do we need a laptop for this printer to work
Answer:	You will need some way to load gcode files into an SD card. When you have the file, the card is inserted into the machine and the object will be produced. For example you could download a file from Thingiverse at a public computer and produce it on your printer.
Question:	I recieved mine 2 days ago but the belts are dry rot and cracked and one broke. How do i contact them to get replacements
Answer:	I can't help you with this. If I were you, I would return it to the vendor. If the visible parts are damaged, there is a probability that there is hidden deteriation.
Question:	How long does it take to make miniature figures
Answer:	anywhere from 1 hour to 8 hours. Much depends on the size and complexity of the figure. Depending on the software you use it will tell you how long it will take. Cura does that.
Question:	what makes this one different from the other ender 3 pros that sell on here for roughly the same price? hardware
Answer:	Nothing... the Ender-3 series printers are made by Creality, SainSmart is just a reseller.

Product features

Redesigned Y-axis

Redesigned with a much sturdier, 40x40 aluminum extrusion for the Y-axis base, which is wider than the Ender-3. This provides better stability and delivers a better print quality.

MeanWell Power Supply

We adopt the MeanWell power supply, which is produced by the listed company with mature technology, and it meets all the needs of fast heating and long-time 3D printing.

Superior Printing Surface

Removable and flexible magnetic printing bed allows you to take prints off the build plate easily. With this build surface, the first layers can be adhered to the bed firmly.

Enriched Accessories

It must be amazing that more useful accessories included in our package. Extra parts can save your time while you really need, also cost-effective.

Resume Print

If electrical power is lost, prints can be resumed from the last layer when powered back on, saving time and reducing wasted filament!

Without Clogging

Our MK-10[thread M6] extruder design greatly reduces the risk of a clogged nozzle.

Fast Heating

A high-watt density hotbed provides rapid heating, reaching its operating temperature in 5 minutes or less!

Large Build Volume

The 8.7 x 8.7 x 9.8" (220x220x250mm) build area allows you to create large and complex models.

Tips about Levelling

If you happened to receive a severely bowed bed plate after unboxing, please reach our support team for a replacement. If it is a slight curve (±0.2mm), you could manage to fix it through the following steps.

• Adjust the bed step-by-step according to the User Manual (see page 20). If the central part is uneven while the corners are flat, please try to level the bed on each of the four corners meticulously.
• After finishing the steps on the manual, if it is still uneven, please try to print by adding raft in CURA.

Product description

Overview



SainSmart’s latest Creality3D series printer is specifically designed for hobbyists, tinkerers, and the curious. As the premier

entry-level 3D printer on the market, the Ender-3 kit includes everything you need to learn about 3D printing. Brought to you

by the creators of the CR-10, the Ender-3 delivers professional-grade results in an affordable package. Get your hands on one

and unleash your creative side!



WHY CHOOSE SAINSMART?



As an industry leader since 2010, SainSmart offers a 1-year manufacturer’s warranty on 3D printers, so you can rest assured that your purchase is protected.

Contact us for professional solutions recommendations and expect a qualified response within one business day. Buy with confidence!



Machine Parameter:



Printing Technology: FDM

Printing Accuracy: ±0.1 mm

Nozzle Diameter: 0.4 mm

Layer Thickness: 0.1 to 0.4 mm

Nozzle Speed: 180 mm/s

Compatible Filaments: 1.75 mm PLA, TPU, ABS, PETG

Operating Systems: Windows, Linux, MacOS

Compatible Software: Pro/E, Solidworks, Siemens UX, 3DS Max, Rhinoceros 3D

Compatible Formats: .stl, .obj, .mpt, .mpf

Ambient Temperature: 5 to 40° C (41 to 104° F)

Nozzle Temperature: 255° C (491° F)

Heated Bed Temperature: 110° C (230° F)

Connectivity: USB 2.0 connection, SD Flash

Power Source: AC 100-265V 50-60Hz

Overall Size: 440 x 410 x 465 mm (17.3 x 16.1 x 18.3”)

Auto Resume Print: Yes

Spool Holder: Yes



WHAT'S INCLUDED?



1 x Ender-3 3D Printer (LCD Screen, Power Supply, Spray Head Assembly, Spool Holder, Motors, Parts need to be assembled)

1 x Tool Box (50g Testing Filament Included)

1 x Screw Accessories Box



Step by Step Manual:



https://s3.amazonaws.com/s3.image.smart/download/101-91-311/SainSmart_Ender3_Instruction.pdf

https://s3.amazonaws.com/s3.image.smart/download/101-91-311/40-40_PLA_testfile.gcode

• 【Cost Effective】 By eliminating the high retail markup, SainSmart is able to offer a sensible package with unrivaled quality in the entry-level space. The compact design allows Ender-3 to fit in the trunk of your car or even back seat, while still providing 6x more build volume than other entry-level printers.
• 【High Precision & Noiseless】 The CNC-machined Y-axis mounting slot ensures highly precise positioning of the printer head. V-slot POM (polyoxymethylene) wheels allow the nozzle to glide smoothly and silently.
• 【No Clogging or Warping】 Our patented extruder design greatly reduces the risk of a clogged nozzle. There’s no need for printing tape or glue due to the incorporation of a new viscous platform sticker. MK-10[thread M6]
• 【Fast Heating & Resume Print Feature】 The heated bed can reach its operating temperature in just five minutes. The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
• 【Semi-Assembled】 This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish putting it together. A fun STEM educational experience in mechanical engineering and electronics.

User questions & answers

Question:	Has anyone have or had an issue with a hot spot in center of printbed
Answer:	No, I have not had that issue. Maybe your bed is heating unevenly
Question:	How loud is it? The CR-10 is insanely loud and uses cheap fans
Answer:	Hello, we have upgraded the fan with a better parts supplier to minimize the noise. Compared with CR-10, Ender-3 runs much quieter. Please feel free to contact us at [email protected] if you have any question.
Question:	What's the packaging size for this printer? (i have to consider a 2nd shiping after reciving it from you
Answer:	The package size is 20.1"(L) x 15.7"(W) x 7.5"(H). The gross weight is 17.8lbs.
Question:	Do you need to use any specific software or can your use any models you find on the internet
Answer:	The version of Cura that comes on the SD card with the printer is a bit dated. However, you can download UtliMaker Cura free and tweak a few settings (looking at the file in SD:/Software and USB Driver/CURA/Reference Data/Ender 3.ini) you can get it rocking. Printer settings: Select Creality CR-10 like the instructions say, change the X (width, Y(depth) and Z(Height) as show in the instructions. Choose "Marlin" as the G-code flavor. The firmware is Marlin (which is based on Reprap) if you do some G-code magic it will tell you this. Recommended settings: Layer Height: .15 (higher setting for lower quality, you start to see the lines and it bonds less) !Enable Retraction! Retraction Distance: 8.0mm Retraction Speed, Retraction Retract Speed, Retraction Prime Speed all set to: 80mm/s Retraction Extra Prime amount 8mm(to the 3rd) Retraction Minimum Travel: 0.2mm Print Temp: will vary by filament but I use 231C with Polylite PETG, 82C bed temp, 100%fan. Speed being 46mm/s and works great! The rest of the settings are mostly preference. If you're using it for educational or non-profit reasons, then AutoDesk (makers of AutoCAD) make something called Fusion 3D which is simply amazing. Takes a little learning but they have video series all over their site. Cheers!

Product features

Ender-3 3D Printer

The Ender-3 is designed specifically for hobbyists on a limited budget. Our most affordable 3D printer, the Ender-3 boasts the same outstanding performance as the CR-10, but is even more compact and affordable.

Home & School Use

Being an entry-level 3D printer, the kit is designed to invite imagination and innovation to students and hobbyists. Its low cost expands its availability to school and home settings, while still providing a high-end print quality not found in low-cost printers!

Top Quality Control

The entire assembly consists mostly of only injection molded, CNC machined, and extrusion manufactured parts, ensuring reliable and consistent operation, matched with the quality for every user! The cartesian design, based off the CR-10, provides the same eloquent, robust, and precision construction ready for DIY assembly!

Full Filament Compatibility

The standard brass nozzle allows printing with most types of 1.75mm 3D filaments and of course the renowned SainSmart flexible TPU filament.

Resume Print

If electrical power is lost, prints can be resumed from the last layer when powered back on, saving time and reducing wasted filament!

Without Clogging

Our MK-10[thread M6] extruder design greatly reduces the risk of a clogged nozzle.

Fast Heating

A high-watt density hotbed provides rapid heating, reaching its operating temperature in 5 minutes or less!

Large Build Volume

The 8.7 x 8.7 x 9.8" (220x220x250mm) build area allows you to create large and complex models.

• Fast Assembly, Mega X 3D printer came in two modules and all it takes is to plug in 12 screws and 3 cables, easy to assemble and get printing right out of the box, Perfect choice for beginners and veteran
• High Print Precision, This 3D Printer’s print precision is greatly improved by equipping it with Y Axis Dual Sideway Design and Z-axis dual screw rod design, The pitting in the skin and texture in the clothing all can shows up
• Large Build Volume, This FDM printer comes with larger build spaces available, At 11.81in(L) X 11.81in(W) X 12in(H), able to print models that 90% of other 3d printers could not. More space for fulfilling your fantastic idea
• Patented Heat Bed, No hassle of sticker any more, Ultrabase bed surface coated with patented microporous coating, allowing the print holds strong when printing and then effortlessly falls off the bed when it cools to room temp at the end of the print, Kindly note, The bed will not go over 90 degree
• More Function,1 Resume Print: One click to resume from the last recorded position when suffered power outages, 2 TFT Touch Screen: As responsive as operating on the phone, 3 Meanwell Power Supply: Compliance with UL60950-1, enhance the safety performance, 4 All ANYCUBIC 3D printers backed with lifetime technical support

Product features

ANYCUBIC Mega X FDM 3D Printer

• Printing Technology: FDM 3D Printing(Fused Deposition Modeling)
• Certifications: UL, CE, FCC, RoHS, EN
• Input Rating: 110V/220V AC, 50/60Hz
• Software Input Formats: .STL, .OBJ, .DAE, .AMF
• Software Output Formats: GCode
• Weight: ~14kg
• Printer Dimensions: 500mm x 500mm x 553mm

Rigid Metal Frame

One-piece frame, all-metal body, to ensure the stability of the body, ANYCUBIC Mega X 3D printer effectively reduces resonance shaking during printing, which greatly enhance the print quality and restore more details of the model.

Y Axis Dual Sideway Design

Mega X 3D Printer's Y-axis integrated guide rail design with customized aluminum profile module, which takes into account the Y-axis linear motion and platform stability, can maximally improves the printing accuracy.

Z-axis Dual Screw Rod Design

ANYCUBIC Mega X uses the Z-axis double screw motor design, which is more durable, does not lose steps, and has higher accuracy than traditional coupling motors, Better reduce the possibility of printing errors.

Low Effort Leveling

Special large-size leveling knob, compared with traditional knobs, Mega X 3D printer's leveling saves more than 60% effort. After replacing the special knob, the leveling will be more labor-saving, and it can be easily pushed with one finger.

Powerful Titan Extruder

Equipped with updated Titan extruder, the optimized combination of the classic extrusion system, ANYCUBIC Mega X provides greater torque to ensure smooth feeding, not easy to jam, and compatible with flexible 3d printer filament.

TFT Touch Screen

3.5" TFT Touch Screen, user-friendly interface, simple operation, rich functions, smooth operation, one-key switch between Chinese and English, which can provide you a different touch screen experience on 3d printers.

• Ease of Use: Five-minute assembly, plus with an auto bed leveling system, the CR-6 SE brings you an unrivaled out of box experience.
• A Quiet Beast: 32-bit silent motherboard, Atmega2560 control chip, and 24V 350W MeanWell power supply enables the CR-6 SE to heat up quickly and consistently with reduced noise.
• Pro Performance: robust aluminum frame, dual lead screws and adjustable timing belt contribute to delivering a smoother print finish of the prints.
• Quality of Life Addons: Flexible hotbed clips, foldable filament holder for easy storage, stepper motor covers deliver a cleaner look.
• Smooth Printing Experience: The Newly-Designed Extruder on the CR-6 SE allows for a quick and painless filament feeding and the carborundum glass bed for better adhesion and easier removal, together with the filament run-out sensor and resume printing function will keep you printing, not troubleshooting problems.

User questions & answers

Question:	Does it come with Filament or just the Printer
Answer:	Yes, it will come with a small spool of filament for you to test.
Question:	Just to be sure - in the US do I want this on 115v or 230v
Answer:	Hi, the power supply has the option for both. The US uses 110-120v.
Question:	Has Creality fixed the mainboard issue of shorting out and causing smoke to come out of the control box yet
Answer:	Yes they have.
Question:	How do I know if the units being sold on Amazon have the mainboard and power switch shorting issues fixed
Answer:	The one I got is fixed and i got it 2 months ago.

Product features

Auto bed leveling system

Leveling the bed is fundamental to quality 3D prints but hard to master. The easy to use leveling system will get you off to a great start without the fuss.

Five-minute setup

The Creality CR6-SE comes assembled. Plug everything in and you're ready to go!

4.3 inch Touch Screen & Simple UI

With a 4.3 inch full color touchscreen and an upgraded user interface that prioritize ease of use, the CR-6 SE is an ideal choice for beginners.

How the CR-6 SE provides you a smooth printing experience?

• Cold and quiet: CR-6 SE uses enhanced heatsinks with better heat dissipation. In combination with the TMC2209 Motor Drivers , it enables quiet for silent and accurate printing.
• Modular nozzle: The stock nozzle in the CR-6 SE adopts a modular design that allows for customization. The design also makes it easy for spare part replacement.
• Filament run-out sensor & Resume printing support:No longer will running out of filament mid print will ruin a job, your print will pause and wait for you to load filament before continuing. In case of a power outage Keep you 3D Printing objects uninterrupted, your print job will resume right where it left off.
• Add-ons that improve your overall printing experience:
  • Adjustable belt tensioner
  • Tool storage compartment
  • Portable carry handle
  • Dynamic coupling
  • Silicon hotbed cable protector
  • Hotbed fixator
  • Wide Y-axis profile

New Extruder Design

Redesigned for a smooth and straightforward filament feeding.

Carborundum Glass Bed

Better adhesion when you need it, and easier to remove prints when cooled.

Improved Performance

Sturdy aluminum frame, dual Z-axises and an adjustable timing belt, the CR-6 SE can print with less vibrations and wobble, and thus produce greater results.

Product description

Overview





The CR-10 MAX from the famous manufacturer Creality is a large format FDM printers. It has a generous print volume of 450 x 450 x 470 mm also has significant improvements in its frame design, auto-leveling, and power system. The large-format 3D printer also has a 4. 3" touch screen, 0. 8 mm nozzles alternative, making the printing process easier. Last but not least, the all-in-one base design offers an easy installation experience.



Specifications



Printing Technology: FDM (Fused Deposition Molding)

Accuracy: ±0.1mm

Layer Thickness: 0.1mm to 0.4mm

Nozzle Diameter: 0.4mm, 0.8mm

Compatible Filaments: 1.75mm PLA, Wood, TPU, ABS, PETG, Copper Filament, etc.

Heated Bed Temperature: ≤100°C

Nozzle Temperature: ≤250°C

Mode of Operation: Connected to a PC or Offline with TF card

Compatible Formats: stl, obj, amf

Compatible Software: Cura, Simplify3D

Operating System: Windows XP/Vista/7/10, MAC, Linux

Motherboard Power Supply: 75W / 24V; Input: 100-240V AC; Output: 24V

Heated Bed Power Supply: 750W / 24V; Input: 100-240V AC; Output: 24V

Shipping Weight: 24.8kg



WHAT'S INCLUDED?



1 x CR-10 MAX 3D Printer (Parts need to be assembled)

1 x Assembly Tools Box 1 x 200g Test Filament

• Large Build Volume Often it is believed that personal FDM 3D printers are limited to only making relatively smaller models, but CR-10 MAX has a generous print volume of 450 x 450 x 470 mm, which allows printing larger models and turning your ideas into reality.
• Stability Triangle Frame The Z-axis brace is linking to the top of the frame to the base, leading to the stability triangle frame. This unique design improves the printing precision due to reducing the error produced by the Z-wobble.
• Matrix Automatic Leveling CR-10 MAX comes with an automatic bed leveling feature, ensures that the printing platform is level whenever you’re preparing to print. With an inductive proximity sensor near the tip of the print head that “probes” specific 16 points on the platform when the bed leveling process is first initiated.
• Double Belts & Optional Nozzles CR-10 MAX equips two belts with a powerful biaxial motor, making the printing process stable. Compatible with two different nozzles, the 0. 4mm is for high precision prints and the 0. 8mm nozzle is for faster prints.
• Split Flow Power for Heated Bed One intriguing innovation feature for this printer is a split flow 24V power supply for its large heated bed, which reduces electromagnetic interference and improves the heating efficiency.

User questions & answers

Question:	it says number of 2 nozzles the machine has does it mean i can print dual color
Answer:	2 nozzles are designed to meet different customer needs. We have added 0.4mm and 0.8mm nozzles to the accessory. They can be replaced instead of being used at printing dual color.
Question:	Does this print aluminum
Answer:	It depends on the melting point of the filament you are using. The nozzle temperature of this printer can reach 250°C.
Question:	Also the aluminum bed is warped, so when the four corners are leveled starting a print in the middle never touches.??? can i return this poj
Answer:	Yep with in the time of purchase you have so many days to return check Amazon customer service for details great replacement and return policy
Question:	What is the difference / benefit of purchasing the cr10 max from sainsmart vs directly from creality 3d's amazon store
Answer:	Hello, thanks for your question. This is SainSmart x Creality CR-10 Series printer. It is a cooperation between Creality and SainSmart. We do have a Creality certificate of authorization. SainSmart will provide a life-long technical support and 1-year warranty. If you have any query in the future, please feel free to contact us by emailing [email protected] at any time.

Product features

The CR-10 MAX from the famous manufacturer Creality is a large format FDM printers. If you are a newbie looking for your first 3D printer purchase, look no further. SainSmart x Creality CR-10 Series is recommended for beginners who want to cut their teeth on 3D printing. As one of the most popular mid-range printers, plenty of instruction videos and tutorials are available online. The massive online community behind the CR-10 series, e.g. Facebook groups, is eager to help people who are new to 3D printing and CR-10 series. If you are an experienced 3D printing enthusiast looking for an upgrade, look no further.

Large Build Volume

CR-10 MAX has a generous print volume of 450 x 450 x 470 mm, which allows printing larger models and turning your ideas into reality.

Dual Power Supply

One intriguing innovation feature for this printer is a split flow 24V power supply for its large heated bed, which reduces electromagnetic interference and improves the heating efficiency.

Featured Accessory

Capricorn Teflon Tube has the characteristics of high-temperature resistance and smooth feeding. BONDTECH extrusion design, dual drive gears for strong thrust and high extrusion and feed performance.

BL Touch Auto-Leveling

BL Touch auto-leveling, comprehensive measurement point, and dynamic leveling compensation.With an inductive proximity sensor near the tip of the print head that “probes” specific 16 points on the platform when the bed leveling process is first initiated.

Safety Printing

If electrical power is lost, prints can be resumed from the last layer when powered back on, saving time and reducing wasted filament!

Dual-Z Axis

Dual-Z Axis can reduce errors for high large-size printing precision via the Golden triangle to reduce Z-axis vibration.

Optional Nozzles

Compatible with two models of nozzles, the 0.4mm is for high precision prints and the 0.8mm nozzle is for faster prints.

HD Touch Screen

Equipped with a 4.3” touchscreen with awesome UI design, makes the operation easier and effective. The CR-10 MAX can unleash your creativity in 3D printing.

• Double performance in single machine,A muse to creativity, Ender 5 Pro is a combination of DIY fun and whole machine stability with high precision.
• Ender-5 Pro Upgrade Metal Extruder Frame: the metal extruder have better stronger pressure to pushing filament into printer nozzle so will improve the printer's performance. And our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed.
• Creality Ender 5 Upgrade Capricorn Bowden PTFE Tubing: 1.9mm ± 0.05mm Inner Diameter Reduces the "wiggle room," or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems.
• Double Y-axis With Stable Output: Ender-5 Pro has a double Y-axis control system with synchronous operation and stable output to avoid vibrations resulting from long time printing.
• After-sales services: with 1 year warranty, if you have any question during usage, please free free to contact us!

User questions & answers

Question:	Does this ship from the US or overseas
Answer:	I got it next day so I’m guessing US.
Question:	Is there any PLA filament in the package
Answer:	Yes, it is includes extra 2kg PLA filament 1.75mm for test.
Question:	Is this the model with a removable bed
Answer:	The model pictured does in fact have a removable bed, but that picture is wrong and should be removed. It is of an Ender 3 Pro which this is not. But yeah just go get a piece of mirror cut for a few bucks from Lowes or HD.
Question:	What's the difference between this at $349 and the other MKK creality ender 3 pro 3d printer here on amazon at
Answer:	The multiple upgraded parts reflect these points: carbon silicon glass, 4.3 inch screen and automatic leveling function.

Product features

A Combination of DIY Fun and Whole Machine Stability with High Precision

• Print Size: 220x220x250mm ( 8.6"x8.6"x9.8"), Industrial grade silicone wire and a power supply built into the base make this machine safe and durable
• Filament Run Out Detection: the printer will warn you when it runs out of filament or there is a problem pulling filament from the roll. You will have the opportunity to resolve the issue and continue printing
• SD Card hot plugin: If for any reason you happen to remove the SD Card during the printing process, by reinserting the SD Card you can continue printing
• Stability: The sturdy metal base and side filament holder make it easy to change the filament without disturbing the printing process
• Easy to Assemble: with only eight mostly-assembled modules to combine, total assembly of the machine can typically be completed in under two hours.

User questions & answers

Question:	inluye el filamento
Answer:	3meter testing PLA only
Question:	Is it noisey
Answer:	it is normal voice :-)
Question:	Is this model compatible with a Raspberry Pi running Octoprint
Answer:	Yes , I have Octoprint with Raspberry Pi 3B hooked up to my Magic and it works very well. No issues.
Question:	How difficult to build
Answer:	I had just built it and it is relatively easy. I was done in roughly and hour and a half. Would have been done sooner but I didn’t follow the instructions which was my fault.

Product features

JGMAKER Magic 3D Printer with Built-in power supply

• One-piece structure,extremely innovative design,create a new generation DIY 3D printers.
• DIY components,it comes with three assembled parts, fast assemble, you can enjoy the fun of assembling by yourself.
• Adopt Industrial grade silicone wire and high quality aluminum profiles with all metal base and build in power supply which ensure the printer quality and safety.

Resume Print with Filament RUN-OUT Detection

• Filament RUN-OUT detection: The machine beeps when your filament runs out to allow you to change the filament and avoid a failed print
• Power Fuilaur Detection: Resume printing from where the last print was stopped due to power failure. Saving you valuable time and filament
• Memory Function: Resume print due to SD card removed accidently, If for any reason you happen to remove the SD Card during the printing process, by reinserting the SD Card you can continue printing.

Print Size: 220*220*250mm

• The Magic 3d printer is a perfect tool meant to inspire and drive imagination, creativity, and ingenuity, the print size is 220 x 220 x 250 mm, which support for most models
• Built-in power supply design creates a more elegant appearance and is a safer option than the exposed design on some other machines.
• Machine Size：443*450*472mm
• Machine Weight：8kg
• Packing Size：550*465*175mm

• ✅【FIVE MINUTES RAPID HEATING 】:The heated bed can reach its operating temperature in just five minutes. The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
• ✅【STABLE PERFECT PRINTING 】:Improvements to the Y axis improve stability, and the alteration of the control box unit move the fan to the bottom of the unit, Make every printing works perfectly.Our all new magnetic bed surface for easy model removal is included stock on the Ender 3 Pro. Easily remove the magnetic print surface from the hotbed and remove models with no spatula or razor necessary.
• ✅【SIMPLE LEVELING METHOD】: Larger Hand-turn Nut, Ergonomic Design, Enabling To Level the Platform More Quickly.Safely protected power supply and resume printing function, you can continue printing after the power is restored.
• ✅【BRAND NEW DESIGN LESS PRINTING COST】:A brand-new patented infrastructure that effectively reduces the risk of plugging and poor spillage.employs new magnetic self-adhesive platform sticker rather than traditional masking tape and glue for easy model picking-up,excellent adhesion and less printing cost.
• 💖✅【PERFECT GIFT CHOICE FOR STUDENTS】: The lower base and all wiring completed in our factory. This kit style 3D printer comes with all tools included and is an excellent project for middle school and high school-aged students. The perfect gift to spark a lifelong love for science and engineering, and provide a deeper understanding of machinery and robotics! 🔅

Product features

Resume Printing While Power-off

Safely protected power supply and resume printing function, you can continue printing after the power is restored.with this function,can help achieving long-time printing.

DIY Assembly

Enjoy more fun of DIY,easier to realize the innovation transformation of the appearance and meet more of your printing needs

New Platform Sticker

Employs new magnetic self-adhesive platform sticker rather than traditional masking tape and glue for easy model picking-up,excellent adhesion and less printing cost.

Rapid Heating

Ender 3 Pro comes with a high quality power supply,the heated bed can reach temperatures of 110℃ in just 5 minutes.

Simple leveling method

Larger hand-turn nut,ergonomic design,enabling to level the platform more quickly.

MK10 Extrusion Mechanism:

A brand-new patented infrastructure that effectively reduces the risk of plugging and poor spillage.

High Precisiom

Improvements to the Y axis improve stability, and the alteration of the control box unit move the fan to the bottom of the unit, Make every printing works perfectly.

Stable Power Supply

Meanwell power supply,which made by listed company over 30 years mature technology ,provide you the best user experience and worth trying.

Parameters1:

• 3D Tech:FDM
• Brand:Creality 3D
• Model:Ender 3 Pro
• Filament:1.75mm PLA
• Precision:±0.1mm
• Output:DC 24V 15A
• File Format:STL,Obj,Amf

Parameters2:

• Slice Thickness:0.1mm-0.4mm
• Package weight: 8.6kg / 19 lbs
• Magnetic Bed Temp:≤70℃ (PLA)
• Printing Speed:Max 180mm/s,Normal 30-60mm/s
• Printing Size: 220*220*250mm / 8.6x8.6x9.8 inches

Parameters3:

• Machine Size: 440*410*465mm / 17.3x16.1x18.3 inches
• High quality Precise aluminum extrusion Frame
• Nozzle Diameter: Standard 0.4mm,supports 0.2,0.3mm etc.
• Input:AC:100-120V/6.8A 200-240V/3.4A 50/60Hz

Parameters4:

• Printing Method: SD card(off-line), contact to the PC(on-line)
• Slice Software:Cura, Repetier-Host ,Simplify 3D
• Modeling software:PROE, Solid-works, UG, 3d Max, Rhino 3D design software, etc.

Product description

Overview

SainSmart UV Curing Chamber is suited for resin-printed models curing,

it is very simple to operate and allow you to monitor and document the UV curing process

With the help of UV Curing Chamber, giving you a model with extremely fine detail,

far more than a standard filament printer can produce.

This equipment dramatically reduces your manufacturing costs

and improves your overall printing process, delivers you a finished product. 

SainSmart UV Curing Chamber also can shorten the curing time of resin,

and complete the curing of the model, to avoid the damage

and scratches caused by the soft molding when the resin model is just formed.

Operating instructions:

1.Put the model into the curing chamber and close the front cover.

2.Adjust the mode you want to choose. Short press to select mode, rotate to adjust the time, long press to start and pause.

3.You can use the red button on the side to select whether the platform rotated or not.

Four modes: (a: light source on both sides; b: light source on top; c: heating)

A: a +b

B: a +c

C: a

D: b+c

Parameter:

Light Source: UV-LED

Light Wavelength: 405nm

Light Power: 40W

Heating Power: 70W

Input Voltage: 110-220V

Method of Heat-Dissipating: Air Cooling

Max Curing Size: 150 x 150 x 160 mm

Overall Dimensions: 185 x 185 x 252mm

Rotation Speed: 15/rpm

Weight: 3kg

Resin Type: Compatible with Photosensitive, Rigid, Ductile, Flexible & Cast resin

Power Supply Adapter: 24V 5A DC (UL certification)

WHAT'S INCLUDED?

1 x SainSmart UV Curing Chamber

• Easy To Use: The SainSmart UV curing chamber adopts a special control system, which makes the operating process easy and effective. The three-side light source and heating function can be turned on and off separately, realizing the combination of four modes to meet your different needs.
• Automatic Temperature Control: Accurate temperature control is the key to successful post-curing. Both the chamber inner and the lamp beads can achieve smart temperature control, which ensures the stable performance of functional resin-printed models and extends the service life of the lamp beads.
• Fast Heating: The heating chamber can be heated to 60 °C, speeding up the curing process and to maximize some of the physical properties of the resin-printed models.
• Uniform UV Curing: In order to produce the uniform light intensity of 405nm wavelength from the 40 LEDs light source, the UV-LED array stage has been kept rotating during exposure, which enables all angles of your print to be cured and exposed perfectly. Comes with container, curing can be improved by curing in water ( Less oxygen in the water than in air, oxygen inhibits cure).
• Ideal for 3D Resin Prints: By delivering high-quality results and compatible with most of the SLA and DLP printers on the market, SainSmart gives you an ideal choice for your 3D resin prints. Also, this UV curing chamber is a cost-effective option due to its compact design and excellent UV-LED 3D curing capability.

User questions & answers

Question:	What is the outer case made from? It looks like plastic from the images
Answer:	The outer case is metal with a plastic viewing window. The machine has a nice weight to it.
Question:	wavelength: Can you make the wavelength at 365 or we can change to this wavelength our self
Answer:	Sorry, the wavelength is fixed at 405nm and you can't change it to 365. The 365 wavelength machine needs to be customized.If you have other questions, please feel free to contact us via [email protected].

Product features

SainSmart UV Curing Chamber

SainSmart UV Curing Chamber uses 405nm uv lights and built-in heating function to accelerate the post-curing process, saves you time and frees you from the limits of weather. With the advanced temperature and time control system, parts can be precisely cured to its optimal property, helps you get the most out of your parts, it has a volume of 150 x 150 x 160 mm, making it perfect for curing your 3d parts.

Things You Should Know About Post Curing

Resins are made with light-sensitive polymer chemistry. Most SLA/LCD resin 3D printer uses a 405 nm laser/led light for resin curing to produce a solid part. However, even after the parts finished printing, it still need a “postcurintg” process to complete polymerization and achieve its maximum mechanical properties. It enables parts to reach the highest possible strength and become more stable.

Instruction

1. Put the model into the curing chamber and close the front cover.
2. Adjust to the proper mode for your parts. Short press to select mode, rotate to adjust time, long press to start and pause.
3. You can use the red button on the side to turn on/off the turnable.

405nm Curing Lights at All Sides

With curing light using the same wavelength as your printer at all sides, plus with the turntables at the bottle, parts can be equally cured,and therefore free of warping issues.

Precise Time Control

To maximize the mechanical properties of 3d parts, precise time control helps to achieve the optimal results by preventing over-curing and under-curing.

Multiple Operation Mode

Curing settings may vary from resin to resin,by combining heat and light together, this chamber can accelerate the curing process, gives you the result you need with less time.

• REMOVABLE BUILD SURFACE PLATE: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
• SAFE POWER SUPPLY: Ender 3 Pro comes with a UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.
• RESUME PRINT FUNCTION: Ender 3 Pro can resume printing from the last recorded extruder position after suffering unexpected power outages.
• SEMI-ASSEMBLED KIT: This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish putting it together. A fun STEM educational experience in mechanical engineering and electronics.
• WHAT YOU GET: Ceality Ender 3 Pro 3D pinrter, lifetime technical assistance and 24 hours professional customer service.

User questions & answers

Question:	What version is the board
Answer:	The newest version of the board is 1.1.5, it does not come with the printer though. Mine came with 1.1.4 which is very similar to the 1.1.3. Creality Sells the 1.1.5 separately right now as the Creality v1.1.5 Silent Main Board. It is $50 bucks and you might find it cheaper but it is a worthwhile upgrade. It has newer stepper drivers that make the stepper motors virtually silent. I can't hear them anymore only the fans now. The board also has thermal runaway enabled and has a boot loader preinstalled so if you wanted to switch to Vanilla Marlin or the TH3D software you could do so very easily. Installing this board and the TH3D software also made adding a BL Touch kit easy.
Question:	Will this printer print abs and petg also
Answer:	From the list of questions and answers on the product page, "Will this printer print abs and petg also? Answer: Yes, but for abs recommend getting a glass bed and an enclosure of some sort. By Cameron Moss on December 25, 2018
Question:	What is the physical footprint of this unit
Answer:	The actual base footprint itself requires a flat 12" x 12" surface, however certain parts such as the display panel overhang requiring a bit more space. A roughly 16" wide by about 20" deep space should be about right, although you will want to make sure both the back and front have an additional few inches to spare as the bed does move back and forth during operation. I mount mine on top of a 16" x 18" patio paver block for support and stability. I place the paver block over some dense foam that is cut about 1" in from the block edge (14" x 16"). This gives the printer a platform that helps contribute mass to absorb vibrations as well as offer a bid of noise reduction cause by sound transmission through the base. Placed a few inches from the back wall it also ensures the printer travel area remains clear. There is also YouTube video on using this technique if interested (not mine but I came across it after I came up with the same idea separately).
Question:	Does it come with any needed software? If so - what kind
Answer:	It does come with a very old version of Cura. The lastest version of Cura is what I am using. Just download it from https://ultimaker.com/en/products/ultimaker-cura-software/list. If all you are doing is downloading models and printing this is all you need. If you want to make your own 3D models that complicates things. There are many, many 3d modeling programs and which one to use is a very personal choice and each takes time to learn to use. Blender is free, Sketch-up is also I think. But there are commercial programs that can cost up to a couple of thousand to use. Zbrush, Studio Max, and others. This is list of most of them: https://all3dp.com/1/best-free-3d-modeling-software-3d-cad-3d-design-software/ Without a better idea what you are wanting to do, this is the best answer in a short space I can give.

Product features

Why choose Creality 3D Ender 3 Pro 3D Printer?

1. Fully Open Source: Allow users to improve their printer upon the source code and share the changes within the community, resulting in an improved experience for all.

2. Ideal Gift for Kids: This semi-assembled kit 3D printer is a perfect gift for kid, allow them to learn about the basic construction of 3D printers.

3. Ideal for STEM Projects: Invite imagination and innovation to student, help them discover the wonders of all the STEM fields.

Resume Printing Function

Ender 3 Pro can resume printing after power outage or any other unexpected stoppage.

Meanwell Power Supply

Branded power supply and high-watt hot bed ensure fast heating to the printing platform.

Upgraded Extruder Design

Greatly reduces the risk of clogged nozzle and bad extrusion.