14 best new 3d printers industrials

• The X-Max with pioneered creation of two different ways for placing the filament. Ventilative printing or enclosed constant temperature printing for you to choose when printing the different types of filament.
• 5-inch full color touchscreen with intuitive icons makes for easy operation
• Build size: 300mm x 250mm x 300mm / 11.8" x 9.8" x 11.8"
• Full metal support more stable than plastic support;Aviation aluminum, CNC machining aluminum alloy
• QIDI TECH Professional Amazon after-service team,if you have any problem about our 3d printer,we will reply to you within 24 hours.Free one-year warranty.

User questions & answers

Question:	Does it stop if the filament runs out and wait for user to load new filament
Answer:	The printer currently does not have such function. So if the filament runs out, there will be no prompts or stop printing. Please load new filament directly to print.
Question:	Can a Filament Detector be added by user to the Xmax
Answer:	Because the machine has automemory...on power outages, I built my own filament detector. It serves two purposes: 1) It will detect the end of a filament at the sensor (basically a mechanical switch), and trip a relay which shuts down the machine; and 2) It cuts the filament in the case of a reel bind which then does (1) above. (this is done by a bend that pulls into a blade when the force is enough). Yes, it's a kludge. But when you are 10, 15, 22+ hours into a print (often overnight) and are not baby sitting it, this method has been a plastic and time saver. I am sure there are better ways, but this was a quick and dirty project after I had a spool bind up. While I normally use higher quality manufacturers, binding can and does occur, especially if the last person to swap out a roll wasn't careful and let the end loop under a wind. Those of you who have printed enough, know exactly what I am talking about.
Question:	Does this printer have filters for fumes
Answer:	There is a foam filter element over the cabinet fans. This does little more than filter the air blown into the build chamber, and is really unnecessary, for all intents and purposes. Consider it a dust filter for the inside of the printer. It has no impact on any fumes or particulates in the air escaping the printer during use..
Question:	Can it automaticlly stop if the filament runs out like bibo 3d printer
Answer:	No, it cannot. However, there is a pause and resume function, so you can replace/change filament mid-print, you just have to detect the correct time (or predict it in gcode) when the filament will be close to running out.

Product features

Double Z-axis:

Updated the Single Z-axis to Double Z-axis, more stable and solid for large size prints.

Innovative design of double z-axis motor structure with 4 pieces Imported 12mm axis.

Maximum print size is 11.8''x9.8''x11.8''(300(L)x250(W)x300(H)mm)

Newly Developed Extruder:

Two Sets of Qidi Tech Third Generation Extruder Assembly with Different Capability.

A extruder : For printing general material such as PLA, ABS, TPU ( already installed on the printer).

B extruder : For printing advanced material such as Nylon, Carbo Fiber, PC.

Two Different Ways for Place the Filament:

The first creation of the two different ways for place the Filament.

A. Place the filament outside: The filament feed more smoothly while printing PLA, TPU, PETG. It compatible with any brands of 1.75mm filament.

B. Place the filament inside: For printing advanced material such as Nylon, Carbon Fiber, PC, which requires an enclosed constant temperature printing.

5.0 inch Touchscreen:

5.0 inch touchscreen. Larger and user friendly interface makes it more intuitive and easy to operate.

Removable Plate:

Movable extraction, curved metal plate, can be used repeatedly, it is more convenient to remove the model after printing.

The plate's front side can print normal filaments, such as PLA, ABS,TPU,PETG.

The plate's reverse side can print advanced material such as Nylon, Carbon Fiber, PC.

Qidi Print Slicer:

The Qidi Tech latest generation slicer software version 5.0 : Redesigned UI interface of Qidi Print software is more convenient to operate. It has been changed the software's slicing algorithm and improves the print quality by 30 percent and speed by 20 percent. The Qidi Print software compatible with all types of Qidi Tech 3d printers, life-time free, the alternative to paid software ( If you have the old version, please download the latest version on Qidi TechI official website).

QIDI TECH One-to-one Service:

If any problems with the X-Max 3d printer, please contact Qidi Tech team and we will reply in 12 hours.

• STRONG STABILITY:Integrated sheet metal body,Smooth bears and rods,High torque stepper motor,upgraded MK8 extruder,The main motherboard contained 32 bits ARM core,A4988 motor drivers,3.2 inch touch screen,Integrated heating bed,220/110V touch power switch.
• MULTI-MATERIALS:Enclosed environment,and high temperature heating bed,support PLA,ABS,PETG,HIPS,TPU,RUBBER,FLEXIBLE,WOOD,CARBON FIBER Filaments
• FILAMENT RUN OUT WARNING & RESUME PRINT:When filament run out ,it will auto pause and utter a sound,when you replace the new filament,and continue to print . The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
• REMOVE EASILY:Using magnetic bed surface for easy model removal . Easily remove the magnetic print surface from the hotbed and remove models with no spatula or razor necessary.
• WARRANTY AFTER-SALES: 12 Months Warranty ,We provide original part for after sale.and will provide professional customer service within 24 hours.

User questions & answers

Question:	what Firmware does this printer use
Answer:	The board main core is Arm with 32 bits, The Firmware is similar to Reprap,we developed it,we can give it to customer for free,it is easy to use ,thanks!
Question:	what kind of material i have to buy for use this printer? can you some number
Answer:	This printer support most materials,as PLA,ABS,PETG,HIPS,carbon firber,wood ,tpu (flexible),so you can buy those what you want to print,we suggest you can print start PLA firstly,Btw we have putted one roll PLA filament into the printer,if you buy this printer,you can use it directly,thank you!
Question:	Can auto bed leveling be added
Answer:	No,it has already supported semi-bed leveling,according customer feedbacks,it is more practical and useful for users,thank you!
Question:	What are contents of the box
Answer:	In the box comes the printer completely assembled, ready to use, it comes with the USB cable to connect it, a microSSD with PDF manual, an example model ready to print, three STL files of examples, a small box containing a USB adapter -microSSD, tools and spare parts in case you need them (very useful for a beginner like me with 3D printers) and a spool of PLA filament. And most importantly, it doesn't come in the box, which is the excellent technical support they offer.

Product features

HUAFAST 3D Printer HS-Mini S with Multi-features

• Ultra high Precision
• Metal cabinet
• Color touch screen
• Closed environment
• Magnetic platform
• Power off resume
• Filament detective warning

SUPER STABILTY

laser cutting and shaping of integrated sheet metal chassis makes the machine super-stable,the prototype has been tested continuously for more than three months, and printing time exceeds 2000 hours.

VARIOUS MATERIALS

Enclosed environment system,it can printing over 10 different kinds of materials,as PLA,ABS,PETG,HIPS,Wooden,TPU,Flexible,Rubber,Carbon Fiber.

ULTRA HIGH PRECISION

Normal 0.1mm high-precision printing;

Default nozzle size:0.4mm

Type:MK8

Color touch screen

• 3.2 inch tft mks touch screen
• simple operation
• simple interface
• friendly UI
• six languages

Power off resume

When unexpected power failure occurs,the printer will automatically save the print data and record the current position,after the power is restored, the printer can resume the printing function with one click, so that the printing will not be afraid the failure.

Filement detection warning

It supports 5 points leveling

It will be more and more useful and practical for new users,intelligent leveling,easy to print,you will print awesome models quickly.

• 【Larger Printing Volume】Creality CR-10 S4 3d printer with larger printing size 400*400*400mm, allows you to Creality more impressive models, no limit of your imagination and creations.
• 【Resume Printing Function】Creality CR-10 S4 3d printer, resume printing while the power-off，the the motherboard is fully upgraded and supports continuous power failure, which effectively reduces model scrapping caused by power outages.
• 【V2.1 Motherboard Added】Creality 3d V2.1 motherboard: all-upgrade, quality assurance, industrial-grade process, 200 hours of continuous printing without pressure.
• 【MK10 Technology Adopted】MK8 extruder mechanism is added to the printer, A brand-new patented the infrastructure that effectively reduces the risk of plugging and poor spillage, and can print almost all consumables on the market.
• 【Filament Sensor】Creality CR-10 S4 3d printer will automatically be suspended to ensure the model can be smoothly printed when the filament runs out or disconnected.

Product description

Printing size: 200*200*200mm

Machine size: 370*380*430mm

Molding technology: FDM fused deposition molding

Printing supplies: PLA/TPU/wood/carbon fiber, etc.

Hot bed temperature: ≤100℃

Printing method: online or TF card offline

Operation interface: Chinese/English switch

Support format: STL/OBJ/AMF

Slicing software: Cura/Repetier-Host/Simplify3D

Computer operating system WIN/XP/MAC/Linux/Vista

Rated power: 200w

WIFI wireless printing

Please make the line comfortable, you can print and check the printing status remotely

Automatic shutdown

After printing, it will shut down automatically to save power

Super sound-off

There is only 48.9 decibels of sound during printing

• WIFI wireless function: Wireless 3D printing, realize the interconnection and automation of industrial production units, and say goodbye to the pager's network cable and SD card, and easily remotely monitor 3D printing. Support for smart phones on the market
• Resume printing function and power failure detection: The printer is shielded by the power supply to avoid the influence of voltage spikes and power interruptions. If the power is cut off, printing can be resumed from the last layer, thus saving time and reducing waste
• Upgrade Metal Extruder Frame: The metal extruder have better stronger pressure to pushing filament into printer nozzle so will improve the printer's performance. And our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed
• Upgraded Silent Motherboard: Has adopted industrial self-developed motherboard backed by ultra silent driver. It demonstrates firm properties as well as reduces noise,no more than 50 decibels
• Service: If you have any questions about this product, you can contact us by e-mail, and we will reply you within 24 hours

Product description

CR-10 S4 Large Product Build Benefits:

Interruption Recovery – Building a massive item on this means you may be concerned about printer power interruptions. When printing from SD-Card, this printer has a “resume” feature that will pick up where it was interrupted.

Filament-Out Protection – The CR10-S4 also features a useful “Filament Detection” unit. If you run out of filament during a particularly large build, the printer will halt and wait for refill. Couple this feature with “Interruption Recovery”, and you can imagine the benefit on large, time-intensive builds.

Features:

Easy assembly and sturdy build quality

Removable glass bed

Double Z-Axis lead screws

Ability to print a number of filament chemistries

Resume printing when a loss of power has occurred

Quick Assembly Specifications:

Modeling Technology: FDM (Fused Deposition Modeling)

Power Supply: Mean Well UL certified power supply

Printing Size:400*400*400mm

Max Traveling Speed: 100mm/s

Filament: 1.75mm ABS/PLA, HIPS, PETG

Input: AC 100-265V 50-60Hz

Output: DC 12V 270W

Layer Thickness: 0.1-0.4mm

Nozzle diameter: 0.4mm (standard)

Precision: ±0.1mm

File Format: OBJ, G-Code, STL(in CURA converted to G-Code)

Working Mode: USB cable (not included) online compatible or micro-SD (offline)

Max Nozzle Temperature: 260ºC

Max Hotbed Temperature: 90ºC

Machine Footprint: 711x940mm (28×37″)

Machine Mass: 13.5kg / 16kg packaged

• 【Larger Printing Volume】Creality CR-10 S4 3d printer with larger printing size 400*400*400mm, allows you to Creality more impressive models, no limit of your imagination and creations.
• 【V2.1 Motherboard Added】Creality 3d V2.1 motherboard: all-upgrade, quality assurance, industrial-grade process, 200 hours of continuous printing without pressure.
• 【Resume Printing Function】Creality CR-10 S4 3d printer, resume printing while the power-off，the the motherboard is fully upgraded and supports continuous power failure, which effectively reduces model scrapping caused by power outages.
• 【Filament Sensor】Creality CR-10 S4 3d printer will automatically be suspended to ensure the model can be smoothly printed when the filament runs out or disconnected.
• 【MK10 Technology Adopted】MK8 extruder mechanism is added to the printer, A brand-new patented the infrastructure that effectively reduces the risk of plugging and poor spillage, and can print almost all consumables on the market.

User questions & answers

Question:	My first 3d printer. what are the differences. just that s4 is 400x400x400 vs
Answer:	spool weight 1KG.
Question:	Does CR 10S4 have a bootloader
Answer:	This is on Amazon: search for castable resin IFUN Jewelry Casting Resin for LCD 3D Printer Lost Wax Casting UV-Curing Resin 405nm Photosensitive Liquid Yellow 500ml

Product description

KOOTANS 4pcs New 5 Hole 90 Degree Joint Board Plate Corner Angle Bracket Connection Joint Strip for Slot 8mm 4040 Aluminum Profile 3D Printer Frame



Package include: 4pcs aluminum L joint plate



Material: high quality aluminum alloy; used with M8 screw and M8 t nut



4040 Series Aluminum Profile Connector widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects.



Fit 4040 series Aluminum extrusion



Rigid connection, used to connect pieces of 40mm aluminum extrusion at a 90 degree angle

• Package include: 4pcs aluminum L joint plate
• Material: high quality aluminum alloy; used with M8 screw and M8 t nut
• 4040 Series Aluminum Profile Connector widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects.
• Fit 4040 series Aluminum extrusion
• Rigid connection, used to connect pieces of 40mm aluminum extrusion at a 90 degree angle

Product description

GRF, for freedom

We believe that each of us should have the freedom to turn our ideas, creativity and imagination into reality.



GRF is committed to being one of the best choices for making freedom.



With you, we know what we will do.



Unique industrial design

Open 3D printed new doors in 3 steps

Step 1: Assemble the build platform

Step 2: Level the printer

Step 3: Assemble the resin (make sure to tighten the FEP film)



With a unique steel ball design, you only need the Z axis to return to zero, then lock the leveling screw to start printing





High quality CNC parts

Metal and CNC fabricated structures provide repeatable and consistent performance over time



Smart and user friendly

Interactive interface allows you to preview and monitor print status in real time



Photon slicer / workshop

GRF comes with the latest version of the internal design slicer software for an exceptional user experience

• Unlike some DIY 3D printers, this machine can be used almost immediately. We have enough instructions to set up, level and clean.
• The compact, self-contained, all-metal body delivers superior rigidity. Metal and CNC fabricated structures provide repeatable and consistent performance over time.
• The 3D printer comes with the latest version of the internally designed slicer software for an exceptional user experience.
• We offer a one-year machine warranty
• Please contact us if you have any questions about this product. It will reply within 24 hours.

• The X-PLUS with pioneered creation of two different ways for placing the filament. Ventilative printing or enclosed constant temperature printing for you to choose when printing the different types of filament.
• The X-PLUS 3D Printer Kit comes with two different types of extruder assembly. The extruder A had already been installed on the printer. The max printing temperature is 250C, and it can works well with PLA, ABS, TPU. And for extruder B, free to you if you need. The maximum printing temperature is 300C, and can print Nylon, Carbon Fiber, PC. (The latest development, free trial).
• Double Z-axis driver, ensures more stable and more precise printing quality when you print large model size. Higher configuration 3D printer.
• Latest slicer software version 5.0: Redesigned UI interface of QIDI software is smarter and more convenient to operate. It has changed the software's slicing algorithm and improves the print quality by 30 percent and speed by 20 percent. The QIDI software is compatible with all types of QIDI printer, life-time free, an alternative to paid software.(If yours is the old version, please download the latest version on QIDI official website).
• Backed by with One-to-one QIDI TECH service. If you have queries about 3D Printer, feel free to contact our exclusive and fast support service team, we'll reply back to you within 24 hours. Free One-year warranty is also guaranteed.

User questions & answers

Question:	Is the qidi 3d yellow banner removable? i understand branding, but it's a bit of an eyesore
Answer:	You can take it off but it will leave the glue on and it is a long process to remove.
Question:	Is the only difference between x-plus and max the bed size? i noticed the max doesn't list carbon printing - is that feature not available there
Answer:	The main differences between the X-Max and X-Plus are the build volumes (Max= 300x250x300mm vs Plus= 270x200x200mm) and the touch screen (Max=5" vs Plus= 4.3"). They both can print the same materials, including Carbon Fiber, Polycarbonate, PC/ABS, & Nylon using the Hi-Temp print head that has a hardened steel nozzle to prevent wear when using abrasive filaments. Hope that helps.
Question:	Is this a dual extruder printer like bibo 3d printer
Answer:	No, it is a single extruder. The additional extruder they include or send at customer request is an upgraded single extruder module.
Question:	How does this printer compare with the prusa i3 mk3? they are at the same price point but i would have to wait several weeks for the prusa
Answer:	The guy that sits next to me at work got the same Prusa kit. He feels like the QIDI X-Plus may out perform his. Also, my build capacity is a bit larger than his. He likes the PEI surface on the Prusa. My only mild complaint is having to exchange extruders for the over 250C range, but I think I get smoother prints with my low temp extruder that he does with the general purpose extruder on the Prusa. Also, he regrets not having an enclosure like mine has. We compare prints all day long, so after he spent an entire day and night building his & I was up and running in 10 minutes, I want to buy another one! I also got mine in 2 days & I have almost immediate answers from support 24/7, no matter how trivial. They are amazing! It took a couple of weeks to get the Prusa. He was so jealous!

Product features

Double Z-axis:

Updated the Single Z-axis to Double Z-axis, more stable and solid for large size prints.

Innovative design of double z-axis motor structure with 4 pieces imported 10MM axis.

Maximum print size is 10.6''x7.9''x7.9''(270(L) X 200(W) X 200(H)mm)

Newly Developed Extruder:

Two Sets of QIDI Third Generation Extruder Assembly with Different Capability

Extruder A : For printing general material such as PLA, ABS, TPU (Already installed on the printer).

Extruder B : For printing advanced material such as Nylon, Carbo Fiber, PC

Two Different Ways for Placing the Filament:

The pioneered creation of the two different ways for placing the Filament.

A. Place the filament outside: The filament feed more smoothly while printing PLA, TPU, PETG. It is compatible with any brands of 1.75mm filament.

B. Place the filament inside: For printing advanced material such as Nylon, Carbon Fiber, PC, which requires an enclosed constant temperature printing.

4.3 inch Touchscreen:

4.3- inch touch screen with large and use friendly interface. During whole process, you're well instructed on the touchscreen display, make it more intuitive, and more precise and easier to operate.

Removable Plate:

Movable extraction, curved metal plate, can be used repeatedly, it is more convenient to remove the model after printing. And meanwhile, can minimize the damages or offsets to the build plate.

The plate's front side can print normal filaments, such as PLA, ABS,TPU,PETG.

The plate's reverse side can print advanced material such as Nylon, Carbon Fiber, PC.

QIDI Print Slicer:

Latest slicer software version 5.0: Redesigned UI interface of QIDI software is smarter and more convenient to operate. It has changed the software's slicing algorithm and improves the print quality by 30 percent and speed by 20 percent. The QIDI software is compatible with all types of QIDI printer, life-time free, an alternative to paid software.(If yours is the old version, please download the latest version on QIDI official website).

QIDI TECH One-to-one Service:

If any problems with the X-Plus 3d printer, please contact Qidi Tech team and we will reply in 12 hours.

• Direct drive installed, perfectly print with TPU & PLA 3d printer. TMC2208 motherboard equipped, BL touch also can be available to be installed.
• Dual port cooling fan extruder:evenly heat-dissipated and cooling down immediately. Reducing plugging and poor-spillage ensures models with high quality.
• All Metal Frame: High quality V-profile selected, more stable without any vibration smoothly printed-out with high accuracy.
• Upgraded Ultra Silent Mother Board: Self-developed industrial-graded motherboard and TMC2208 Ultra Silent Drive are adopted cost-effective, running more stable, noise reduction and compression resistance.
• Strong compatibility auto & Manual leveling: BL touch(Auto leveling device) can be added by yourself, enjoying more fun of DIY your own 3d printer.

User questions & answers

Question:	What are the dimensions of the assembled item? In particular I'm interested in distance between the feet, i.e. how big of a surface do I need for it
Answer:	You should allow a table surface area of 20 inches wide by 24 inches deep, with a height of 36 inches (to allow for the spooling device attachment). The control box measures 6 inches wide by 12 inches deep by 6 inches high.
Question:	How easy is Creality's support to contact, and are they responsive
Answer:	I’ve heard it’s impossible. But there is a huge community online
Question:	What is the difference between the cr-10 v3 and the cr-10s pro v
Answer:	Direct drive on the v3 on the print head vs bowden tube
Question:	motherboard an 8bit or 32bit
Answer:	It's 8bit

Product features

Creality CR-10 V3 3D printer as one of the newest upgraded CR series 3D printer open a New experience in printing world.

1.The Direct Titan Drive expand the print filament material sorts, TPU filament is become possible.

2.The stable frame let level bed more easier.

3.Filament sensor remind you to change the new filament, save the printing time.

4.Resuming printing function let printing become more free and easy.

5.Upgrade silent motherboard let printing more quiet and comfortable.

6.Upgraded 24V/350W Mean Well power supply, stable supplying ability, and firm printing

Direct Titan Drive

CR-10 V3 Direct Titan Drive is more helpful and reliable when producing 3D prints with flexible soft filaments like TPU and ABS. Furthermore, the biggest benefit for using direct extruder is easier filament retraction thus avoiding filament stringing and oozing during printing.

Dual Port Cooling Fan

Dual port cooling fan extruder, evenly heat- dissipated and cooling down immediately.Reducing plugging and poor-spillage ensures models with high quality.

TMC2208 Ultra Silent Motherboard

Self-developed industrial-graded motherboard and TMC2208 ultra silent drive are adopted.

Cost-effective/Running more stable/Noise reduction/Compression resistance.

Filament Senor

Filament Breakage Sensor

Save your filaments when a strike occurs, ensure the printing item status timely.

Resume Printing

Resume printing function

Recover from potential print failures before they happen.

UI Navigation

Upgraded design, clear UI navigation, see the screen more clear. Large sd card slot easy press in.

• 【Quick Slicing Software】F152S is equipped with the latest version of our slicing software Wiibuilder, which brings a brand-new experience to users. Faster loading and slicing (60M moonlight model loading time 10S, 40S to complete slicing. Accurate prediction of print time and consumed printing material etc.) The software supports multiple material types (PLA / PETG / ABS / PC / NYLON). Developed new seam concealment technology to make your print surface smoother.
• 【Silent and Healthy】 F152S adopts four-door open and fully enclosed design concept. The main control board is equipped with TMC2208 driver controllers, which makes the printing process silent. F152S uses a 0.08mm air filter module to block the fine particles generated by 3D printing to protect the health of you and your family.
• 【Smart and Convenient】F152S does not require assembly and uses a wizard interface after booting which helps beginners to use the printer. With a 4.3-inch full-color touch screen, automatic leveling, filament runout detection, and power resumption functions, this takes the worry out of printing. Automatic shutdown after printing makes printing more energy-efficient and environmentally friendly.
• 【Multiple Print Modes】F152S is equipped with a WIFI module, so you can control the printer through an APP (PoloPrint Pro) and supports Wiibuilder software so you can send sliced files for printing with one click.

User questions & answers

Question:	Do you have any slicing software
Answer:	Wiibuilder comes with the printer. Pretty good slicer program.
Question:	will this printer work with Simplify 3d software
Answer:	This 3d printer can work with simplify3d software, we can provide software profile with F152S for simplify 3d.
Question:	Do I need to purchase filament separately
Answer:	In the box, there is a roll of 1 kg filament for free. If the filament used up you can buy the new filament from our shop or other 1.75mm filament from different shops.
Question:	What is the printer's print dimensions
Answer:	The printer's print dimensions is 200mm*185mm*195mm,this size can be used to print most of the industrial accessories, motor equipment shells, etc.

Product features

WEEDO F152S

The F152S 3D Printer includes a host of features that makes it easier than ever to get perfect 3D prints with a minimum of hassle. The full enclosure helps maintain internal temperatures, ensuring that drafts, air conditioning, and other environmental factors have no effect on the print and making it easier to work with materials like ASA and ABS without fear of warping.

Product description

This Industrial pack includes Tripod and Turntable which supports Einscan Pro 2X and 2X plus and Pro HD scanner Fixed scan with (or without) Turntable.



Fixed Scan with Turntable

For completing a 360-degree automatic scan in few minutes. Recommend for small objects, such as industrial components, ornaments and small artistic pieces.



Fixed Scan without Turntable

For scanning medium objects.It’s ideal for capturing high-accuracy data and rich details.

• Tripod and Turntable. Designed to work with EinScan Pro HD, 2X Plus and 2X only
• Enables EinScan Handheld scanner capture high-accuracy and high-resolution 3D data of small to medium objects
• Industrial Pack enables Fixed Scan with or without turntable to achieve high accuracy and details of scanned 3D data

• 【Tempered Glass Print Bed】This glass plate is a popular upgrade for the normal Ender 3 and Ender 3 Pro because of its very good adhesion and fast heating speed. The smooth first layer also increases the aesthetics of your finished models. With the latest Creality Ender 3 V2 3d printer, you no longer have to buy this upgrade because the printer comes with it as standard.
• 【Creality V4.2.2 32 Bits Silent Mainboard】The noise of 3d printers can be very annoying. This upgrade mainboard has eliminates this problem. It has been built to offer a beefy level of power, featuring an ARM Cortex-M3 STM32F103 CPU and a TMC2208 stepper drivers. This makes it powerful to operating a great machine, but also near-silent in operations, completely void of the classic stepper driver squeaks and squeals as the stepper motors twist and turn.
• 【UL Certified MeanWell Power Supply】Equipped with brand name MeanWell power supply to heat up quickly and let useers choose between power voltage of 115V or 230V. Meanwhile the ender 3 v2 has been shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
• 【Beginner Friendly】Creality Ender 3 V2 offers easier to understand operations, simplified involvement from the user, and essentially more accessibility to Makers of all ages and expertise. These kinds of upgrades means beginners don’t have to spend the many hours of learning, testing and tweaking to enjoy great prints nowadays, reducing the barrier of entry and allowing everyone to get involved in the beautiful culmination of creativity and science that is 3D Printing.
• 【Many More Minor Improvements】The sleek design with discretely hidden power supply, the nice blue extruder knob for easy filament feeding and filament changes. A tiny tool drawer for keeping tools, spare nozzles and other handy items in, improved belt tensioners that are both easier to reach and nicer to use. They all add to the overall user experience, making the ender 3 v2 printer easier and more convenient to use and understand.

User questions & answers

Question:	What kind of warranty does it come with
Answer:	Hi, We offers 1 years warranty and 24hours technical support
Question:	Is this the creality newest 2020 ender 3 upgrade 3d printer? i want to collect all creality 3d printers, i really love this brand
Answer:	Cool, me too. I was in the group.
Question:	Hi I am looking to purchase this ender 3 v2 3D printer as a gift for my boyfriend that he was new to 3d printing. If there are any suggestions
Answer:	As I know, Creality was a big brand in 3D printers. The ender series were classic best-selling printers. This ender 3 v2 is an upgraded version of the original ender 3 and ender 3 pro. More convenient installation and use. Especially suitable for beginners.
Question:	how about printing ABS, does heat bed support to 100 C
Answer:	And the heat bed can be heated up to 100C

Product features

Why Choose Tresbro New Updated Creality Ender 3 V2 3D Printers ?

• Updated mainboard with silent TMC2208 stepper drivers: Compared to the Ender 3 and Ender 3 pro, a V2 design that delivers users out-of-the-box experience and silence-oriented upgrades(quieter 3D printers).
• New UI & 4.3 Inch Color Screen: With a 4.3-inch color screen and a redesigned UI that prioritizes ease of use, the Ender-3 V2 is an ideal choice for beginners.
• Carborundum Glass Bed: Better adhesion when you need it, and easier to remove prints when cooled.
• Easier Maintenance: Pre-installed X and Y-Axis belt tension make it even easier to keep your machine printing at its best. Easily adjust belt tension to maintain accuracy performance.
• Extruder Knob: Swap filament in and out even easier.
• New Nozzle：Brass nozzle with heat resistance.
• Storage Toolbox: Forget where you put those tweezers or snips? Built-in compartment to store your 3D Printer essentials.

Effortless Filament Feed-In

Rotary knob added on the extruder makes it easier to load and feed filament.

Self-Developed Silent Motherboard

The self—developed silent motherboard always ensures smooth movement under 50dB, no noise during printing.

Famous brand Meanwell power is suitable for different voltages under 115V / 230V.

Brand New User Interface

User experience greatly upgrades with the newly designed operation UI system, convenient disassembly and simple operation.

New Injection Tensioner

The XY-axis tensioner supports adjusting the belt tension in a quick and more convenient way.

Carborundum Glass Platform

The carborundum glass platform enables the hotbed heat up quicker and prints adhere better.

Ultra smoothness even on the first layer.

V-guide Rail with High Standard

Stable to print.

Ender-3 V2 uses the V-guide rail pulley with

stable movement, low noise, wear resistance and longer life.

• 【UNIQUE DESIGN REMOVABLE Lattice GLASS PLATE 】 Unique design with the lattice glass plate, easy to remove your printing models after cooling.Very convenient for ender to operate machine.
• 【Updated Motherboard Marlin 2.0 & DURABLE & NOISELESS 】XVICO X3S 3d printer kits with the high quality extruder greatly reduces plugging risk and bad extrustion, strong aluminum construction is very durable for customer printing.
• 【SEMI-ASSEMBLED KIT】 XVICO 3d printer diy comes with only several screws, you just need 10 minutes to assemble and more stable performance, Win-Win for fun and time, the knock down parts will help you and your children to learn about the basic construction of 3D printer as you finish putting it together. This is the nice gift for your kids and your family,ideal for STEM Projects.
• 【FILAMENT RUN-OUT DETECTION & RESUME PRINTING 】 Filament runs out to remind you to change new filament quickly, XVICO 3d aluminum printer can resume printing from the last recorded, saving your time and money.
• 【GUARANTEE & SERVICE】 Strict testing for key components before delivery. We are Confident about 3d printer printing quality,We offer 7* 24hours online aftersales sevice,100% Satisfaction Guarantee and life-time technical assistance.

Product features

XVICO X3s 3D Printer Fast To Assemble, Equipped With Marlin2.0 System

Brand: XVICO

Printing Technology: FDM ( Fused Deposition Modeling )

Build Size: 220x220x250 (mm)

Positioning Accuracy: X/Y 0.012mm, Z 0.004mm

Extruder Quantity: Single

Nozzle Diameter: 0.4 mm

Nozzle Working Temperature: Maximum temperature 250℃

Hot Bed Temperature: Maximum temperature 100℃

Temperature control with magnetic platform recommendations in 50-60℃, the highest temperature 70℃

Platform Calibration Type: Manual leveling, you can purchase tools to upgrade to 3d touch automatic leveling

Power Loss Resume

Even if the power supply is interrupted or there is a failure, X3s can resume printing. Only one click can continue printing from the last recorded extruder position.

Smart Filament Detection Sensor

When the filament is exhausted or broken, the printer will automatically pause to protect your model and save time and money.

Assemble An X3s Printer In Ten Minutes

Insert the M5 * 20 screws into the slots on both sides of the rack, and tighten the nuts on each side to connect the bottom frame and the gantry frame.

2.8in HD Touch Screen

Simple UI interface, simple and quick operation. And supports multiple national languages: English, German, Spanish, Italian, Russian, Chinese. Let more 3d enthusiasts use our X3s printer.

Composite Coating Lattice Glass

XVICO X3s printer uses lattice glass platform, which has good heat resistance and high stability. When the hot bed is heated, the object has strong adhesion, and the platform can be easily taken out after cooling.

Support Multiple Materials

X3s supports 1.75mm PLA, PETG, ABS, TPU and other filaments.

Product description

Junco X-Max Industrial 3D Printer

User questions & answers

Question:	Does this print with PVA
Answer:	It came preloaded on the thumb drive included with the printer. There is also a printed version in the box as well. Email them, and I am sure they will provide you the pdf.
Question:	Z axis is 300mm
Answer:	The 2K resolution(2560*1600 pixels) can support to print the model whatever you want. But I think it depends on what kind of model you want. The high-fidelity part seems not..
Question:	can I print tpu
Answer:	The filter helps, but I went ahead and set up a ventilation system as well. I found an STL file of a vent cover and cut it into 3 pieces and printed it off and then spot cured them together with some resin and a UV flashlight. I also ordered a vent fan on here. https://www.amazon.com/gp/product/B01M7S46YZ/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 I then attached a dryer hose to them and mounted the fan on a dryer vent that I have going outside through a board in my window and sealed it up. No more smell.
Question:	Can this work with any laptop or desktop
Answer:	possibly demand, if it's 300$ on the main site it's due to them having to do the extra work of not only creating but packaging and such that amazon would facilitate and deal with.

Product features

Newly Developed Extruder

A extruder : For printing general material such as PLA, ABS, TPU ( already installed on the printer).

B extruder : For printing advanced material such as Nylon, Carbo Fiber, PC.

Two Different Ways for Place the Filament

A. Place the filament outside: The filament feed more smoothly while printing PLA, TPU, PETG. It compatible with any brands of 1.75mm filament.

B. Place the filament inside: For printing advanced material such as Nylon, Carbon Fiber, PC, which requires an enclosed constant temperature printing.

Dual Z Axis

Dual lead screw Z axis design, gives much more stability and accuracy than single lead screw models sold by the competition.

Double Side Printing

A side: We can use the obverse side to print general filament such as ABS, PLA, TPU.

B side: We can use the obverse side to print advanced filament such as Nylon, PC, Carbo fiber, just as smooth like glass.

5.0 inch Touchscreen

They are one of the most common domesticated animals,along with cats,fish and turtles.

Heated, Flexible, and Removable

The removable, flexible build plate makes removing a model A breeze. Simply remove and flex it to dislodge the model.

Print Slicer

It has been changed the software's slicing algorithm and improves the print quality by 30 percent and speed by 20 percent. The Print software compatible with all types of JUNCO 3d printers, life-time free, the alternative to paid software

Clean and Neat Structure

Fully closed metal is more stable and quietly than plastic metal.