12 best dual extruder 3d printer

• 【Independent Dual Extruder Design】Our TL-D3 Pro dual extruder 3D printer has dual nozzles independent of each other, so you can print in dual material/duplication/mirror mode. With dual material printing mode, you can get two color models. Choose duplication or mirror mode, you can get two models of the same color or different colors.
• 【Upgrade Borosilicate Glass Bed】TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the first layer,the model can be Pick up by hand after cooling.
• 【Self-developed Silent Motherboard 】The TL-D3 Pro built-in self-developed silent motherboard tmc2208 driver, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
• 【Easy to Assemble】It comes with several assembled parts. You can assemble the 3D printer in 3 steps, with its user manual, in about 5 minutes.

User questions & answers

Question:	whats the difference between the P, E, and titan extruders
Answer:	Material and heat capacity.
Question:	can this printer work with nylon material
Answer:	Hello The maximum temperature of our current nozzle is 280 degrees. This depends on your nylon material to determine whether it can be printed, but we do not recommend printing on nylon material now
Question:	Does the version of cura supplied with this include a profile for it
Answer:	yes,The printing profile in the SD Card.
Question:	when i purchase the a4988 version, can i upgrade to the tmc2208 driver, and can i upgrade the tempered glass to borosilicate glass bed
Answer:	Dear customer You can upgrade the A4988 driver to the TMC2208 driver. First, you need to buy the TMC2208 driver from our shop, then manually replace the driver, and you need to follow our video tutorial to refresh the firmware. You can also upgrade the tempered glass to borosilicate glass bed, you only need to Just buy borosilicate glass bed in my shop。 How to use borosilicate glass bed:https://www.tenlog3d.com/blog/How-to-Use-Borosilicate-Glass-Bed_b24 How to upgrade the A4988 driver to the TMC2208 driver:https://www.tenlog3d.com/blog/How-to-Upgrade-A4988-to-TMC2208_b22 If you have any problem ,you can send you can an email to [email protected].

Product features

TENLOG Independent Dual Extruder 3D Printer

Printing Speed: 10-150mm/s, Recommended 30-60mm/s

Input: AC 100-240V 50-60Hz

Output: DC 24V 15A

Layer Thickness: 0.1-0.4mm

Nozzle diameter: 0.4mm

Additive manufacturing accuracy: ±0.1mm

File Format: STL, Jpq, G-Code

Max Nozzle Temperature: 300℃

Max Hot bed Temperature: 110℃

Dual Material Printing

You can use two colored filaments to print on the model to obtain two-color models, or use two different filaments to print soluble supports (such as PVA) to accurately achieve difficult-to-place models.

Duplication Mode Printing

You can print two identical models of filaments (or the same or different filaments) of the same color or different colors on the TENLOG 3D printer at the same time, thereby doubling the printing efficiency and saving you time!

Mirror Mode Printing

You can print two symmetrical models of filaments (or the same or different filaments) of the same color or different colors on the TENLOG 3D printer at the same time,the two nozzles are dual-driven at all times for printing, and the two models are immediately aligned with the mirror.

Dual Material Printing

You can use two different filaments to print soluble supports (such as PVA) to accurately achieve difficult-to-place models.

Put in water

Put the printed model with water-soluble support into the water.

Support melts

After putting the printed model with water-soluble support in water for a period of time, the water-soluble support will fall off the printed model

Resume Printing Function

In the event of an unexpected power outage or surge, the control board will remember the last recorded position of the extruder. After the power is restored, The 3D printer will resume printing from the last recorded position.

Filament Runout Detection

When the filament runout detection detects that the filament such as PLA or ABS are used up or broken, the 3D printer will save the information and suspend printing, waiting for the 3D printer to feed the filament again to continue printing.

Upgrade borosilicate glass bed

TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the first layer,the model can be Pick up by hand after cooling.

Unique near-end and direct drive design

TENLOG 3D Printer uses a direct drive extruder and a powerful near-end silent motor design,so that it can print various filament,such as TPU,PVA,PLA,ABS,HIPS,WOOD,PETG,flexible.

• 【Independent Dual Extruder Design】Our Hands 2 Dual Extruder 3D Printer has double nozzles that are independent of each other, allowing you to print in duplication and mirror mode. You can also choose two different colors or materials to create at the same time or print with soluble support (such as PVA) to precisely implement models that are difficult to lay down.
• 【Upgrade Borosilicate Glass Bed】TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the first layer,the model can be Pick up by hand after cooling.
• 【Self-developed Silent Motherboard 】The Hands 2 built-in self-developed silent motherboard tmc2208 driver, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
• 【Easy to Assemble】The printer comes with several pre-assembled parts. You can assemble the 3D printer in 3 steps, with the user manual, in about 5 minutes.

User questions & answers

Question:	Does this Hands 2 3D Printer come fully assembled
Answer:	No, it doen't not, but it is pretty easy to assemble. You can assemble the 3D printer in 3 steps, with the user manual, in about 5 minutes.
Question:	What is Tenlog offical website
Answer:	www.tenlog3d.com
Question:	Does the printer work with windows
Answer:	Dear customer Our Tenlog 3D Printer support XP, Windows 7/8/10, Linux
Question:	Does Tenlog 3D Printer have official facebook group or public account
Answer:	Dear customer, it is our facebook official public account:https://www.facebook.com/Tenlog/ facebook group:https://www.facebook.com/groups/752964928487976/ official website:https://www.tenlog3d.com/

Product features

Product details：

Modeling Technology: FDM (Fused Deposition Modeling）

Printing Size: 220*220*250mm /8.6''x8.6''x9.84''

Printing Speed: 10-150mm/s, Recommended 30-60mm/s

Filament: 1.75mm TPU, PVA, PLA, ABS, HIPS, WOOD, PETG, FLEXIBLE

Input: AC 100-240V 50-60Hz

Output: DC 24V 15A

Layer Thickness: 0.1-0.4mm

Nozzle diameter: 0.4mm

Additive manufacturing accuracy: ±0.1mm

File Format: STL, Jpq, G-Code

Max Nozzle Temperature: 300℃

Max Hot bed Temperature: 110℃

Dual Material Printing

You can use two colored filaments to print on the model to obtain two-color models, or use two different filaments to print soluble supports (such as PVA) to accurately achieve difficult-to-place models.

Duplication Mode Printing

You can print two identical models of filaments (or the same or different filaments) of the same color or different colors on the TENLOG 3D printer at the same time, thereby doubling the printing efficiency and saving you time!

Mirror Mode Printing

You can print two symmetrical models of filaments (or the same or different filaments) of the same color or different colors on the TENLOG 3D printer at the same time,the two nozzles are dual-driven at all times for printing, and the two models are immediately aligned with the mirror.

Dual Material Printing

You can use two different filaments to print soluble supports (such as PVA) to accurately achieve difficult-to-place models.

Put in water

Put the printed model with water-soluble support into the water.

Support melts

After putting the printed model with water-soluble support in water for a period of time, the water-soluble support will fall off the printed model

Resume Printing Function

In the event of an unexpected power outage or surge, the control board will remember the last recorded position of the extruder. After the power is restored, The 3D printer will resume printing from the last recorded position.

Filament Runout Detection

When the filament runout detection detects that the filament such as PLA or ABS are used up or broken, the 3D printer will save the information and suspend printing, waiting for the 3D printer to feed the filament again to continue printing.

Upgrade borosilicate glass bed

TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the first layer,the model can be Pick up by hand after cooling.

Unique near-end and direct drive design

TENLOG 3D Printer uses a direct drive extruder and a powerful near-end silent motor design,so that it can print various filament,such as TPU,PVA,PLA,ABS,HIPS,WOOD,PETG,flexible.

Product description

Leaving our competition a step or two behind, these new features are only available on the new FlashForge Creator Pro:

The new front door comes pre-installed, and has been re-designed to provide easier access to prints.

The new injected PC top cover comes in one solid piece, making it stronger and more effective at regulating temperature.

The new, larger platform adjusting screws have been re-engineered for easier use.

The new extruder wiring router can protect wiring from wear and tear efficiently



What’s in the box?



The Creator Pro

Dual Extruder

2x spool holders

2 spools filament(N.W.:1 kilogram per spool, material and color are randomly selected)

2x spare blue platform stickers

2x filament guide tubes

2 M3×8 screws, 3 wrenches in different sizes, 1 spare leveling knob, 2 spare Teflon tubes, 1 unclogging pin and grease in tool bag

Extruder’s accessory kit Containing turbo fan duct, 2 M3×8 screws, M3×6 screw

Power cord

USB cable

Injected PC top cover

1 x 16GB SD card (contains software ReplicatorG and FlashPrint, test sample files and operation manual)



Compatible Software: ReplicatorG, FlashPrint and Simplify3D(Please kindly noted that Simplify3D is a third party paid software, which is not included in this package.

If user want to use, please buy it by yourself)

Compatible OS: Windows, Mac OSX and Linux

Print from SD card or over USB cable

Input file type: STL, gcode, x3g Printing Build envelope: 225 x 145 x 150 mm

Build volume: About 5 liters

Layer thickness: 0.1-0.3 mm(adjustable)

Nozzle diameter: 0.4 mm

Materials : Works well with 1.75 mm ABS and PLA.



Support Contact Information

If you encounter any issues with your FlashForge purchase or have any questions, please contact the support.

• Full manufacturer's warranty fulfilled by Flashforge, and free email support provided by expert FlashForge technicians
• A sturdy metal frame that is substantially more stable than the Creator's original wood frame.Build volume 8.9 X 5.8 X 5.9 inches
• Aviation level aluminum plate with a thickness of 6.3mm guarantee its surface is completely flat and will not warp during heating process
• Metal platform support plus 10mm guide rod ensure a precise Z axis movement and prevent platform arm from deforming. Filament Compatibility- PLA, ABS, PLA Color Change, Pearl, ABS Pro, Elastic, PVA, HIPS, PETG, TPE, TPU, Conductive Filament, Flexible Filament, Metal Filled Filament, Wood Filled Filament, and PP
• Enclosed chamber insulates and protects ABS prints.Filament Diameter:1.75 mm [0.069 in]
• Please refer the user manual below for better use

User questions & answers

Question:	How fast will this print
Answer:	I'm making some 5"x5"x1/4" ABS plates. They take 90 to 120 min to print.
Question:	Does this printer have a glass bed such as bibo 3d printer's removable glass bed sold in amazon
Answer:	FlashForge does not sell glass bed but you can find it on Amazon.com sold by third party such as this one:https://www.amazon.com/Borosilicate-Glass-Upgrade-Flashforge-Creator/dp/B00XWLVKRG/ref=sr_1_7?ie=UTF8&qid=1482575678&sr=8-7&keywords=flashforge+creator+pro
Question:	I want to print chocolate moulds. Wish list: Food grade material; 7" X 10 " X 1-2 mm thick OR Polycarbonate moulds which are ussually more like 4X
Answer:	7"x10" is no go unless you print in 2 parts and glue together.4"x7" is possible in one go on this machine but your molds will give you chocolate that shows all the layers of plastic.Also polycarbonate prints will likely leech PBA into the chocolate like crazy.I recommend vacuum forming for food molds.Look up leaftechllc dot com. That guy can make vacuum molds for you for hobby prices.
Question:	Can anyone reccomment a 3D scanner? What are the things to look for in a 3D scanner? I'm looking to scan items maybe about 6" or more in size
Answer:	3D Systems sells a tethered hand scanner for about $400. It works well, if you have a systems requirement appropriate PC and don't rotate the scanner clockwise/counterwise while scanning - will lose lock on the object if you do so. Will also lose lock if you move in closer than 15 inches to the object. The slower you scan, the better the resolution, right up to fabric texture. They also make a version for an iPad.

Product features

FlashForge 3D Printer Creator Pro

Sturdy metal frame is substantially more stable than the Creator’s original wood frame.Warp-resistant 6.3mm aluminum build platform remains perfectly level under the stress of high heat.New high heat resistant metal platform supports replace plastic supports.New heavy-duty (10mm) z-axis guide rod ensures steady and precise movement. New acrylic cover encloses the chamber to insulate and protect ABS prints.New LED light illuminates the printing area.New integrated LCD screen and button board functions error-free. SD slot is repositioned for more convenient access.

• ✔️New Double Gear Extrusion Mechanism. Had to change the extruder e-steps from 100 to 139
• ✔️UPGRADE: Perfect replacement for Creality 3D Printers CR-10/ CR-10S/ CR-10S Pro/ Ender 3/ Tornado, etc.
• ✔️All-metal aluminum alloy, High quality dual gear extrusion, stable and durable.
• ✔️For 1.75mm Filament. This Kit NOT include the stepper motor and instruction manual, we need to DIY :)
• ✔️Made by WINSINN, make sure the "WINSINN" label on the box for our after-sales service.

User questions & answers

Question:	It looks like a steal gear turning on a aluminium arm. I there a washer or something to protect the arm from the gear
Answer:	If you mean the tension arm, then yes, but it's not even moving much. If you mean the extruder gear from the motor (not included) then no. But it's point of contact is against the feeded filament. You probably don't need this part, per se, if you have your filament feeding nearly straight, such as from an external filament holder, but I would still recommend it. It's absolutely necessary if using the filament from an angle, such as from the top as the ender 3 originally has it mounted. I chewed through the cheap plastic one they provided within weeks. I've been running with this part for about 2 years without issue.
Question:	gear won't move as it isn't attached to the motor shaft, and there isn't a set screw included to attach the gear to the drive shaft. How to attach
Answer:	Apparently, the ender 3 pro upgraded to an engine model with a press fit type gear (or third party resellers are upgrading bits; mine ender 3 pro came from a reseller and was obviously either used or had parts swapped - I got like $250 worth of free bits preinstalled). You will not be able to remove this without destroying the motor. The solution (I hope, because I have the same problem) is to replace the extrusion motor with the older type, which will apparently cost $10-$25 here on Amazon. You want an ungeared 42-40, and Creality sells a full set of replacement motors here on Amazon for less than $30. I got halfway through replacing this very extruder unit when I discovered the problem
Question:	Is the dual gear extruder compatible with the mp select mini v
Answer:	It will not be compatible out of the box. You would need to recompile the firmware and change the steps per mm for the extruder. You need to make sure the drive Gea diameter is the same as your monoprice extruder if you don't want to change the firmware.
Question:	Are you now shipping the black bolt in the picture, or are you still shipping with the wrong bolt that causes failure
Answer:	Mine came with the silver threaded bolt that the idler gear with the bearings in it ride against. It will quickly destroy the bearings! Return it!!!

Product features

WINSINN Dual Gear Extruder - CR10S PRO

• New Double Gear Extrusion Mechanism. Had to change the extruder e-steps from 100 to 139
• UPGRADE: Perfect replacement for Creality 3D Printers CR-10/ CR-10S/ CR-10S Pro/ Ender 3/ Tornado, etc.
• High quality Double gear extrusion, All-metal aluminum alloy, stable and durable.
• Support: 1.75mm Filament.
• This Kit NOT include the stepper motor, motor bracket and instruction manual, we need to DIY :)

Some customers encountered gear wear problems. The solution is:

✔️Had to change the extruder e-steps from 100 to 139

Because the filament is forced to be centered in both drive gear grooves, the idler drive gear (the one not attached to the motor) is positioned on it's shaft by the motor drive dear. So, to center the idler drive gear properly, my suggestion for setting the unit up is as follows:

1) Assemble everything but do not lock the motor drive gear to the shaft.

2) Using a couple pieces of paper, shim the idler drive gear in the center of its bracket.

3) Clamp a piece of filament in the drive grooves and turn the motor a few turns. This should locate the motor drive gear in the correct position.

4) Lock the motor drive gear to the shaft, remove the paper shims, and you should be good to go.

Package Include:

1 x WINSINN CR10S Pro Dual Gear extruder Upgrade Kit (All Accessories show as Image 2)

Product description

Platform Sticker for FlashForge Creator, Creator Pro and Dreamer 3d printers, 6 Pcs Kit. This sticker can help extruded plastic stick better on the platform and reduce degree of model corner curling up issue.

• Package Dimensions: 5.08 H x 25.4 L x 14.986 W (centimetres)
• Package Weight: 0.068 kilograms
• Helps ABS plastic sticks on the platform
• Country of Origin : China

User questions & answers

Question:	How does this differ from blue painter's tape
Answer:	Much better adhesion and more uses!
Question:	Will this work on the "Finder" platform
Answer:	Yes and no. The finder is smaller so you would have to trim the sticker.
Question:	Could anyone confirm whether these are the "smooth" version or the "rough"? The smooth ones are as smooth as a piece of glass, others like a mouse pad
Answer:	These are identical to the stickers shipped with my printer. I wouldn't say they were as smooth as glass. They do work great, however.
Question:	I'm still using my first sticker and it's about time to change it, how do you get the old one off
Answer:	Please heat the platform up to 70C first, then you will find it is much easier to remove it off.

• 【1】 Fast assembly: Modulated structure allows it to be installed within 10 minutes. Simple and convenient.
• 【2】Open-sourced control board provides limitless possibilities to adjust your printers and modify firmware on your will.
• 【3】Breaking-resuming Function can continue to print from the same place where it stops, regardless of unexpected power failure, stopping to change the filament, stopping and print it tomorrow.
• 【4】High adhesion building platform allows you take down your printing works easier, do not need mask tape and glue stick any more.
• 【5】Quieter and more stable printing movement: The V-shaped wheels and V-slot rails on each axis make the printing quieter, more stable, and more wear-resistant.

User questions & answers

Question:	looking for a 3d printer does this have safety features like thermal runaway protection
Answer:	Yes and power restart
Question:	Does it come with software and printer material
Answer:	you need to download the slicer based on your preference and there is a 10m sample filament coming w/ this printer. if you have question, feel free to directly contact us: [email protected]
Question:	How does this printer handle supports for geometry? For example, if I wanted to print an arch
Answer:	Not really a hardware thing. Supports are more dependent on software and settings than hardware. That said, this printer does come stock with a layer fan which will help with printing arches and bridges, so long as your slicer settings are setup to utilize it.
Question:	which version is
Answer:	I got the a10 with gt2560 v3

• 【Mix-color Printing】Dual extruder module and 2-in-1-out hotend which deliver 4 types of printings, namely, single color, dual color, graded color and mixed color. A20M will greatly enrich your 3D printing life
• 【Safe Power Supply 】 A20M comes with a UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.
• 【Fast Self-assembly】 Just takes 3 steps to install the upper gantry kit on the integrated building base and wiring. Very simple and convenient.
• 【Large Printing Size 】 With its printing area as 255×255×255mm³, A20M makes the best of the building platform and gives you a full view of the printing details.
• 【Breaking-resuming Capability & Filament Detector】 It can continue to print from the same place where it stops, regardless of unexpected power failure, stopping to change the filament, stopping and print tomorrow. Filament Detector will also automatically pause when filament runs out.

User questions & answers

Question:	Is mixed color printing okay
Answer:	It is best if you use mixed colors. Not using one color can lead to clogs. Bi-color prints are wasteful, but blended colors are optimal for this printer.
Question:	Can the geeetech 2020 version a30t be purchased through amazon? i can only find the single extruder a
Answer:	Geeetech a30t is out of stock on amazon,if you want to buy one ,if you want to buy one tricolor printer ,you can choose our a20t.More question you can ask geeetech sellers on amazon.
Question:	Is the extruder easy to plug? i ordered one geeetech a20 last night
Answer:	If it is put together properly there is no problem. The key is making sure the boden tube is all the way in the hot end. There are two Facebook groups dedicated to Geeetech. They are an invaluable resource.
Question:	How does this compare to the A10M
Answer:	Larger print volume of 255x255x255

• Please do not update the firmware if you are not sure which one is right for you as they are several versions in the market, they do not compatible with each other
• Three Print Models Available: You can use your D3 HERO 3D PRINTER to pringting Two-Color/Duplicate/Mirror Model. The maximum print size is 300*300*350mm.
• Multi Printing Material Available: Our D3 Hero 3D Printer works on sorts of materials, such as 1.75mm PLA,TPU,PVA,PP, ABS, Wood and so on. The maximum printing speed is 180mm/s, recommended print speed is 50mm/s (Specifically to set up according to your model)
• LCD Touch Screen: 4.3inch LCD display touch screen, easy to operate. This 2019 new upgrade type D3 HERO 3D PRINTER is an all-in-one machine, moving all components into a compact base under the printing bed. Save more space for you.
• After Sales Service: We provide 3 months warranty for extruder, 1 year for the main parts and life long tech support. Any problem welcome feel free to contact us, we will reply you within 24 hours: )

User questions & answers

Question:	Has anyone had an issue with the 24 volt draw? My current printer is 12 volt and the elctriv in my house is on fuses
Answer:	Not sure what you mean but the title of the device on their website is: HICTOP 24V D3 Hero Dual Independent Extruder IDEX 3D printer. The 24V is a positive selling point. Most older technology printers are 12V which mostly refers to the voltage supplied to the Hotbed Build-plate. The more Voltage and Current = more Power supplied, which means hotter temps for different Filaments. So yes the printer will draw more Current from the wall. But this is a positive thing.
Question:	What size is the box it's shipped in
Answer:	26 X 24 X 10
Question:	What temperatures can the extruders and the bed reach
Answer:	100c fore the bed 250 for the extruders
Question:	Does it have a Slicer App included in the package? How can we update the firmware
Answer:	The latest firmware can be found here at the HICTOP website hic3dprinter [dot] com/pages/firmware Search for "HICTOP D3 hero". A new firmware update has been posted as of April 2020. There are videos available there that will show you how to upgrade. Be aware that you will need an empty micro SD card and to open the bottom of the printer to complete the upgrade of the LCD screen, which is done separately from the main printer firmware. You will need a Windows PC connected via USB to complete the printer portion of the firmware upgrade.

• 【Mix-Color Printing Function】Dual extruder module and 2-in-1-out hot end- Dual extruder realize printing multiple colors on same piece, allow you customize colors, DIY unique colors .
• 【Printing-Resuming】A10M 3D Printer come with filament detector and break-resuming capacity, if the electrical power is off, prints can be resumed from the last layer, save your time and reducing the waste.
• 【Fast-Assembly】GIANTARM A10M Mix-Color 3D Printer come with 90% Pre-assembly, the modularized design provide you with easier assembly.
• 【Large Printing Area】A10M Keeping Prusa I3 Printer gantry with 220*220*260mm³ makes the best of the building platform guaranteeing excellent printing quality for big printing project.
• 【Technical Support】We provide life-time technical assistance and 24hour professional customer service, please free to contact us with any question about the 3D Printer.

User questions & answers

Question:	Will it run support material along with pla and or abs for models that have to have support material
Answer:	The simple answer is yes. The in depth is: it's not easy. it takes a lot of dialing in on your slicer settings and mess. Another option is to get this and upgrade the hot end to be 2 in 2 out instead of 2 in 1 out, which is fairly simple but requires soldering things into the newer motherboards.
Question:	Can you use different kinds of filament for this? I.e. carbon fiber, wood, silk
Answer:	Don't know about carbon fiber, buy it will work with silk and wood both of which are PLA filaments. It will also work with PVA, PETG, TPU, and ABS.
Question:	Is there a way to make it quieter? I just put mine together and it's super loud when printing
Answer:	yes, absolutely you can. This runs an 8 bit proc, upgrading the machine to a 32bit e3 board of numerous flavors could add function, speed and massively quiet down this machine! Look into Creality Ender 3 silent board (that board wont work for you, but the process is the similar and reflects the outcome.) Honestly any SKR e3 board is going to be a great fit for what you are looking for
Question:	Can print in multiple colors on same piece
Answer:	Yes, you can. It comes with dual extruder, you can print two colos in same piece

Product features

Easy To Assemble

The modularized design provides you with an easier assembly experience.

Mix-Color Printing

A10M 3D printer with dual extruder design, provide to be a desktop workhore for you to unleash unlimited imaination.

Break-Resuming Capability

The breaking resuming capacity , a resurrection system, save real-time printing status and resume the printing job exactly at the same place where it has been stopped.

Stable Printing

A10M 3D printer, adopting New upgread control board, it aims to provide more stable priting quality great printout and satisfactory printing experience.

V-shaped Rails& Wheels

V-shaped Rails& Wheels made from wear-resistant aluminum profile, reduce the noise printing, offer you a quite printing environment.

Support Auto-Leveling

The main board of A10M is professional code to suppport auto-leveing funtion.

Note:The auto leveing sensor is not including in package.

• ★★★★★【Friendly Reminder: There is one spool of red color PLA, one spool of white color ABS filament, please check the filament before printing and use the correct settings to print.】QIDI TECH 3D printer, equipped with the latest dual extrusion technology, occupied the overall leading position in education, engineering, design and home/hobby printing.
• X-Pro 3D Printer Kit features conditional breakpoint printing and upgraded 4.3 inch touch screen, Smarter and easier operation.Mute printing.
• Durable and high temperature resistance 6mm aviation grade aluminum build platform, can be heated up to 120℃. Removable curved metal plate make it more convenient to remove the model after printing, which is widely appreciated by users.
• The QIDI TECH 3D Printer with metal platform support rod, which upgraded to 12mm, and also including upgraded parts like motor, main board, and mechanical structure, ensuring more stable printing.
• Backed by with One-to-one QIDI TECH service. If you have queries about 3D Printer, feel free to contact our exclusive and fast support service team, we'll reply back to you within 24hours. Free one-year warranty is also guaranteed.

User questions & answers

Question:	Does this printer support Dissolvable Filament used for support
Answer:	The software provided gives an option to load PVA which is a dissolvable filament. While I haven't tried it, many reviews also indicate that the reason for the dual extruder is to allow for dissolvable filaments when printing supports for complex structures.
Question:	Can i use octopi or astroprint? people on fb say no b/c usb port is only for flash drives not for pcs or other devices. xpro owners, please verify
Answer:	While the newer model of this printer does not have a USB port capable of serial communication, you can attach a Raspberry Pi to the motherboard's UART header and then use Octopi to send gcode wirelessly to the printer. You will need a UART to USB serial adapter. I also used a usb step down voltage converter (24 volt to 5 volt) to power the Pi directly from the printer's power supply. There is one set of available 24 volt outputs on the power supply. I then mounted the Pi next to the motherboard with velcro strips and put everything back together. Works great.
Question:	Can Qidi X pro pause the printing automatically when filament runs out? I saw some printers have the filament run out detection function
Answer:	No. There is no filament run out detection.
Question:	Does this new product support ditto printing, override gcode temp, and changes to the temperature and speed during printing
Answer:	BIBO 3d printer supports the ditto printing. They called copy printing.

Product features

Dual Extruder Assembly:

Added four side air blow turbo fan, ensure better print quality.

Print precision: 0.05 -0.4mm

Print speed: 60mm-150mm

Nozzle max temperature: 250℃

It is capable of printing PLA, ABS, TPU, PETG and two colors printing.

Removable Plate:

Movable extraction, curved metal plate, can be used repeatedly, it is more convenient to remove the model after printing. And meanwhile, can minimize the damages or offsets to the build plate. Which is widely appreciated by users.

Heating bed:

6mm aviation grade aluminum plate

Can be heated up to 110℃

12mm enhanced guide rod

Power Breaking Point Function:

A break point can be saved and the printing can be continued later. If power outage is occurred during the printing process, the printer will automatically save the break point. Intelligent!

Slicing Software:

QIDI Print slicing software, unique auto slice function based on your time and quality preferences. Easy to use.

It can also compatible with simplify 3D software perfectly.

4.3 Inch Touch Screen:

4.3- inch touch screen with large and use friendly interface. During whole process, providing you real-time printing status, make it more intuitive, and more precise and easier to operate.

QIDI One-to-one Service:

If any problems with the X-pro 3d printer, please contact Qidi Tech team and we will reply in 12 hours.

• 【FAST AND PRECISE】: The print speed can reach up to 150 mm/s, and with the Direct Drive Extruder, SW-X1 makes high quality print, especially for flexible filament. When it arrives on your doorstep, the Sidewinder X1 comes 95% pre-assembled, which makes installation easy as can be.
• 【RUNAWAY PROTECTION HEATBED】: The printer has a direct drive extruder and a fast heating AC heat bed with built in thermal runaway protection, even if the board or the SSR malfunctioned, the bed won’t heat up endlessly until bad things happen. Additionally, the heated bed can heat up to 80C in 2 minutes and it only takes the 0.4mm nozzle about five minutes to heat up to 110°C. With the Lattice glass smooth headbed surface, it makes all types of filaments can be easily stick on
• 【MUCH STABLE PRINTING】: There are 3 inductive sensor end stop separately set on XYZ axis while those non-touch, high-precision limit switches can automatically calibrate and maintain good stability under high-speed printing. Most importantly, features Synchronized Dual Z System, SW-X1 greatly increase its printing stability, also, the built in branded power supply ensure stable and sufficient power. Spend more time making without having to manually adjust the print bed.
• 【FILAMENT RUN-OUT+ POWER LOSS DETECTION & RECOVERY】: Have you ever tripped over the power cord and lost a long hours print? SW-X1 will save you from the loss of power. When it recover from a power failure, the machine will continue to print. Also, it will automatically pauses your 3D print and notifies you when you've run out of filament, saving you time and money
• 【QUIET TO USE】: With a 300 x 300 x 400 mm build volume, the Sidewinder X1 3D printer has a hushed operating sound even working at fast speeds, thanks to its exclusive ultra-quiet stepper drivers which significantly reduce the noise level. SW-X1 overhauled the motion system on the Z, replacing the leadscrews with a belt-driven system, which not only reduces the noise level but also allows for faster print speeds. Feel free to work on other things while the machine is printing beside you

User questions & answers

Question:	can it use the m600 change filament command to change colors during print
Answer:	With factory Marlin firmware, no. However, there is a person working on firmware, that I actually have loaded mine, that does have m600 filament change working. In the past I have been able to change filament colors in mine using the filament run out sensor it works pretty good in the meantime.
Question:	What types of filaments does it accept (PLA, wood, metal
Answer:	PLA, ABS, TPU, Flexible Materials
Question:	Has the issue with the ptfe lining in the hot end been resolved
Answer:	All I can say I never had a problem with that
Question:	How about this
Answer:	How about that?

Product features

Resume Print Function

Resume printing from the last recorded extruder position after suffering unexpected power failure or filament outage.

Filament Run Out Detection

When the filament detector detects that filament runs out, the system automatically pauses printing and prompts for feeding.

Professional Extruder

Upgraded high precision extruder greatly reduces the risk of clogged nozzle and bad extrusion.

Fast Heating

The printing bed temperature reaches 80℃ in just 80 seconds, the nozzle heats up to 180℃ in just 1 minute

High Precision

Artillery Sidewinder X1 3D printer features a professional aluminum nozzle and a direct extruder with high accuracy, not easy to get blocked

Ready to Print

All you need to do is to check whether the printing bed is leveled. Loading the filament and inserting a micro SD card with preinstalled models to start your 3D printing journey.

Low Power Consumption

The power of Artillery Sidewinder X1 3D printer is lower than the standard 30W, more energy-saving to prevent global warming.

Specification Configuration

• Layer Resolution: 0.1mm
• Frame: Aluminum Extrusion
• XYZ Positioning Accuracy: 0.05mm, 0.05mm,0.1mm
• Printing Filament: 1.75mm
• Nozzle Diameter: 0.4mm
• Machine Dimensions: 550*405*640mm/550*405*870(With Spool Holder)
• Shipping Box Dimensions: 780*540*250mm

• Machine Weight: 14kg
• Shipping Weight: 16.5kg
• Maximum Print Speed: 150mm/s
• Maximum Travel Speed: 250mm/s
• Build Volume: 300*300*400mm
• Extruder Type: Titan Extruder (Direct Drive)

• 【All Metal Frame & Quick Assembly】SHARK pre-assembled 3D printers has a full-metal body, stable and durable. 95% preassembled already, complicated parts such as cantilever, gantry, and nozzle have been assembled before leaving the factory, get printing right out of the box, you can assemble it effortlessly and get ready within 5~10 minutes
• 【Modular Design for Laser Engraving】SHARK 3D printer can be used with laser kits (not included) to expand the laser engraving function. Please purchase it according to your needs. Supports engraving with a wide variety of materials like wood, plastic, leather, PVC, paper, resin, etc.
• 【Multi-Color Printing】This FDM 3D Printer is equipped with dual all-metal extruders, supports printing with different colourful filaments on a single nozzle. Each extruder has 2 metal gears, providing a smoother feeding performance. The dual color 3D printer machine automaticly switches filaments, you can print colorful models easily
• 【Auto Bed Leveling】The ultra-precise technology allows for 0.1mm accuracy. Just tap the touch screen to activate the automatic leveling interface, the inductive sensor will detect the heating bed, accurately measure the inclination and automatically calibrate. Whether you are a novice or a professional enthusiast, you can enjoy the convenience
• 【More Features】1) 3.5" Removable TFT Touch Screen: Intuitively shows detailed information of the printing process and supports 8 languages 2) Magnetic Heated Bed: Excellent adhesion, avoid warping 3) Four-fan Design: Cool the nozzle from all angles, increase the efficiency of heat dissipation by 42% 4) Resume Print: One click to resume from the last recorded position when suffered power outages. 5) Meanwell Power Supply: Compliance with UL certification, safe and reliable.

User questions & answers

Question:	How many nm is the laser
Answer:	450nm
Question:	Why does the display go blank when I turn it on
Answer:	Dear Client, thank you for purchasing our 3d printer. Please connect the screen cable first, and then power up the machine. This is the correct order for SHARK to start up. If the problems you mentioned occur, turn off the power and wait 30 seconds for the device to discharge before starting up again. The screen will return to normal.If there is any problem that needs our help to deal with, plase contact us. Have a nice day.
Question:	I hear a lot about dual color printing. How do you chose where the colors print in your model
Answer:	In your model you actually create 2 models. 1 is printed as one color, and you chose another color for the other model. These are merged and then you print. So if you want the eyes white, you separate them with Blender, Fusion 360 or another program. It is a separate model. You merge them both and selct the extruder you want to print which color.
Question:	Where to buy replacement parts
Answer:	Dear Client, thanks for your question. We have replacement parts in our US warehouse, and we are updating the listings to our Amazon store so taht customers can find them more easily. If you need any replacement parts, please contact us.

Product features

Laser Engraving

Eengrave more than 10 types of materials such as wood, plastic, leather, PVC, paper and resin. (Laser kits are currently sold separately, please buy as needed.)

Auto Bed Leveling

Smart auto-leveling of 0.1mm precision, efficient and practical, assist manual leveling, convenient for beginners.

Magnetic Build Surface

The magnetic heated bed can be fixed stably without clips, with excellent adhesion, avoid warping.

4-Fan Design

Highly efficient dissipation system with 3 speed modes available: normal, middle, and fast speed, better match your needs.

Large Bulid Volume

Bulid Volume: 235x235x265mm³

Laser Engraving: 235*175mm

Meanwell Power Supply

Branded power supply with overvoltage and overload protection, safeguarding the machine from harmful power fluctuation.