12 best diy 3 d printers

• Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs.
• Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
• Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable.
• Safety Protected Power Supply: Only needs 5 minutes for hot bed to reach 110℃.
• Strict Test: Strict testing for key components before delivery and life-time technical supports available.

User questions & answers

Question:	I am looking to purchase a 3D printer as a gift for a beginner. Does anyone have any recommendations? Thank you
Answer:	My son is 15 and he handpicked this one as a gift. He doesn’t know that I’ve purchased it, but he was very adamant that this was the best one. If the recipient is very technically inclined, I think it would be a great fit. I’ve read tons of reviews and watched several on YouTube. Once it’s properly assembled ( does seem to take some time), then operation is suitable for a beginner (again, must be very technically inclined). My son did request a different type of filament that I also purchased on Amazon, because the included roll isn’t that great. I don’t remember which one I purchased, but it was about 20.00. He also suggested getting or building a table to sit it on, as you should not sit it directly on the floor. He’s making one to put beside his desk, but I’m sure any small table would do. I’m very excited myself to see it in action, but I guess I’ll have to wait until Christmas.
Question:	Does the creality ender 3 has the dual extruders like the bibo 3d printer
Answer:	No, but. You could upgrade it if you have the expertise
Question:	Hi. Purchasing for my young granddaughter. will I need to purchase anything else with the unit in order to use it christmas day
Answer:	You also need the filament sold on spools. It comes in many colors. The filament is the actual product that is used to make the 3D creation.
Question:	Seriously how difficult is the build
Answer:	It is very straightforward, but the downloadable PDF instructions leave a lot to be desired. I highly recommend using the top-rated "how to build" video, along with the PDF. Here is a link to that video: https://www.youtube.com/watch?v=me8Qrwh907Q The video contains a huge number of hints which, having now completed my first 3D print, which was 100% successful, I can now fully appreciate. The video helps you get everything square, and makes sure that many minor adjustments which were not done perfectly at the factory, are tweaked just right.

Product features

Fully Open Source

Allow users to improve their printer upon the source code and share the changes within the community, resulting in an improved experience for all.

Branded power supply

Branded power supply and high-watt hot bed ensure fast heating to the printing platform.

Resume Printing Function

Ender 3 can resume printing after power outage or any other unexpected stoppage.

Upgraded Extruder Design

Greatly reduces the risk of clogged nozzle and bad extrusion.

High Precision Printing

Allow you to print high precision models, creat your own world.

Suitable gift for kids

This semi-assembled kit 3D printer is a perfect gift for kids, allow them to learn about the basic construction of 3D printers.

Ideal for STEM Projects

Invite imagination and innovation to student, help them discover the wonders of all the STEM fields.

• REMOVABLE BUILD SURFACE PLATE: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
• SAFE POWER SUPPLY: Ender 3 Pro comes with a UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.
• RESUME PRINT FUNCTION: Ender 3 Pro can resume printing from the last recorded extruder position after suffering unexpected power outages.
• SEMI-ASSEMBLED KIT: This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish putting it together. A fun STEM educational experience in mechanical engineering and electronics.
• WHAT YOU GET: Ceality Ender 3 Pro 3D pinrter, lifetime technical assistance and 24 hours professional customer service.

User questions & answers

Question:	What version is the board
Answer:	The newest version of the board is 1.1.5, it does not come with the printer though. Mine came with 1.1.4 which is very similar to the 1.1.3. Creality Sells the 1.1.5 separately right now as the Creality v1.1.5 Silent Main Board. It is $50 bucks and you might find it cheaper but it is a worthwhile upgrade. It has newer stepper drivers that make the stepper motors virtually silent. I can't hear them anymore only the fans now. The board also has thermal runaway enabled and has a boot loader preinstalled so if you wanted to switch to Vanilla Marlin or the TH3D software you could do so very easily. Installing this board and the TH3D software also made adding a BL Touch kit easy.
Question:	Will this printer print abs and petg also
Answer:	From the list of questions and answers on the product page, "Will this printer print abs and petg also? Answer: Yes, but for abs recommend getting a glass bed and an enclosure of some sort. By Cameron Moss on December 25, 2018
Question:	What is the physical footprint of this unit
Answer:	The actual base footprint itself requires a flat 12" x 12" surface, however certain parts such as the display panel overhang requiring a bit more space. A roughly 16" wide by about 20" deep space should be about right, although you will want to make sure both the back and front have an additional few inches to spare as the bed does move back and forth during operation. I mount mine on top of a 16" x 18" patio paver block for support and stability. I place the paver block over some dense foam that is cut about 1" in from the block edge (14" x 16"). This gives the printer a platform that helps contribute mass to absorb vibrations as well as offer a bid of noise reduction cause by sound transmission through the base. Placed a few inches from the back wall it also ensures the printer travel area remains clear. There is also YouTube video on using this technique if interested (not mine but I came across it after I came up with the same idea separately).
Question:	Does it come with any needed software? If so - what kind
Answer:	It does come with a very old version of Cura. The lastest version of Cura is what I am using. Just download it from https://ultimaker.com/en/products/ultimaker-cura-software/list. If all you are doing is downloading models and printing this is all you need. If you want to make your own 3D models that complicates things. There are many, many 3d modeling programs and which one to use is a very personal choice and each takes time to learn to use. Blender is free, Sketch-up is also I think. But there are commercial programs that can cost up to a couple of thousand to use. Zbrush, Studio Max, and others. This is list of most of them: https://all3dp.com/1/best-free-3d-modeling-software-3d-cad-3d-design-software/ Without a better idea what you are wanting to do, this is the best answer in a short space I can give.

Product features

Why choose Creality 3D Ender 3 Pro 3D Printer?

1. Fully Open Source: Allow users to improve their printer upon the source code and share the changes within the community, resulting in an improved experience for all.

2. Ideal Gift for Kids: This semi-assembled kit 3D printer is a perfect gift for kid, allow them to learn about the basic construction of 3D printers.

3. Ideal for STEM Projects: Invite imagination and innovation to student, help them discover the wonders of all the STEM fields.

Resume Printing Function

Ender 3 Pro can resume printing after power outage or any other unexpected stoppage.

Meanwell Power Supply

Branded power supply and high-watt hot bed ensure fast heating to the printing platform.

Upgraded Extruder Design

Greatly reduces the risk of clogged nozzle and bad extrusion.

• 📌【Ultra Large Print&Matrix Automatic Levelling】 300x300x400mm ultra large print volume. Auto measures 25 points across the print platform for heat bed leveling. An induction sensor can probe the bed in a grid and apply mesh-based compensation that ensures you print on a level bed every time, all without the time-consuming and labor-intensive leveling tasks.
• 📌【Filament Sensor&Power Outage Recovery】 The filament sensor detects the filament end and sends reminders to the screen to avoid air-printing. Resume printing and recover from exactly where it left off. No worries about unexpected power outages.
• 📌【Auto Filament Assignment&Assembled In No Time】 Automatic load and unload the filament with just a click.Pre-assembly and modular design with quick assemble in 10min. Solid Wire Connection,Distributor connector for solid wire connections.
• 📌【Dual Z-axis, More Accurate Print&Stable Y-axis Movement】 ET5 applies dual Z-axis rods and motors to make sure the smooth and accuracy of every slight movement. Dual Y axis guideway for a more stable and level moving stage of the build platform. Intuitive Touchscreen.Colorful LCD touch screen, allowing you to control the movement of X/Y/Z axis, leveling and printing with ease.
• 📌【Safe Designed Control Board】 You can connect your ET5 online or offline to any configuration for your convenience. You could print via SD card or USB flash drive. Self-developed industrial-grade 32bit control board with MCU STMF407. Stable operation with high precision. The mother board has thermal runaway protection. If the printer fails to detect the temperature for a certain time, it would automatically power off.

User questions & answers

Question:	Can a usb cable be used to connect printer to computer printing program
Answer:	Yes, but it is not recommended. Using the micro sd card is more of a stable print with any 3d printer.
Question:	Can I upgrade the extruder to all metal? Is there somewhere I can look to get one that is compatible
Answer:	I think you can. Thought I saw a all metal extruder on Amazon
Question:	What software would I need to use this with my Mac
Answer:	Cura or simplify3D
Question:	Does it come with filament
Answer:	Sorry，this 3D printer doesn't come with filament.

Product description

Features:

1. Terminal pinboard design with integrated connection ports, covered wires and a more sleek appearance.

2. 2.8-inch full-color touch screen for easy operation.

3. You can upload your design and print it online or offline.

4. Automatic load and unload the filament with touch screen.

5. Precision rollers on X and Y axis which reduces printing noise and provides ultra-high print resolution.

6. Enclosed metal unibody design enables a more stable and reliable structure with compact size.

7. 6 Screws + 3 Cables, modular design with quick assembly in 10min.



Product Description:

Model: ET4

Printing Technology: FDM

Structure: Aluminum frame

Printing Size: 220*220*250mm

Printing Resolution: ±0.1mm

Layer Thickness: 0.1-0.3mm

Connections: Online/Offline Printing

LCD Display: 2.8 inch Full Color Touch Screen

Movement speed: ≤150mm/s (recommended speed 30-60mm/s)

Printing speed: ≤150mm/s (recommended speed 30-60mm/s)

Standard Nozzle Diameter: 0.4mm

Extruder Working Temp (Max): 250℃

Hotbed Temp(Max): 100℃

Hotbed Material: Aluminum hotbed and Tempered Glass

Control Software Language: English/Chinese

Data Input Format: STL、OBJ、JPG

Data Output Format: Gco、Gcode

Module Support Automatically: YES

Machine Size: 440*340*480mm

Machine Net Weight: 7.2±0.2Kg

Power Supply/Maximum: US: 110 AC 240W / EU: 220V AC 240W

Operation System: Windows, MAC

Printing Software: Cura, Repetier, Simplify3D

Working Condition: Temp: 10-40℃, Humidity: 5-80%



Package:

1* Anet ET4 3D Printer

• Filament detection that detects the filament end and sent reminder to avoid air-printing. 2.8-inch full-color touch screen for easy operation.You can upload your design and print it online or offline.
• Resume printing and recover from exactly where it left off. No worries about unexpected power outages. Automatic load and unload the filament with touch screen.
• 6 Screws + 3 Cables, modular design with quick assembly in 10min. Terminal pinboard design with integrated connection ports, covered wires and a more sleek appearance.
• Industrial grade chipset that allows more accurate, fast print. Protected with safety features like overcurrent protection, overload protection, over temperature protection, pre-over-temp alarm.Precision rollers on X and Y axis which reduces printing noise and provides ultra-high print resolution.
• Enclosed metal unibody design enables a more stable and reliable structure with compact size.Support personal turn features, including manually set up fan speed, print speed, heated bed and nozzle temperature.

User questions & answers

Question:	Can you upgrade to the TMC 2208 stepper motors
Answer:	Yes you can!
Question:	How do i adda a BL-Touch probe for autoleveling
Answer:	The Anet ET4X already has a built in autoleveling. It is round a left of the printhead. There are Facebook 3d printer forums that are great and answer a lot of questions.
Question:	hello what driver does this machine have the a4988 or the TMC
Answer:	It comes with A4988. You can buy upgrade parts to put in the TMC2208 but will also have to update the firmware.
Question:	Can i print with tpu filament
Answer:	Yes,this 3D printer can use TPU filament.

• FAST ASSEMBLE: New Magic comes with three module, only base, Frame and filament spool, total assembly of the machine can typically be completed in under 20 minies
• METAL BASE and Dual Polished Rod: Use sturdy new frame and One-piece metal base, equiped with dual Polished Rod, which can print more accurately model
• RESUME PRINTING: printer has filament sensor and power failure detection, when the filament used up or there is a sudden power failure, it can resume printing.
• Auto Feed Filament and SD card hot plug in: only first time you need manually send the filament to the nozzle, then you can automatically feed and retreat through the operation screen
• Safey Printing: Use build-in power supply, the heat bed temp reach to 100℃ within 5 minutes

User questions & answers

Question:	Gifting for beginners. does it matter the type/brand of filament i need to purchase for this particular model? tia
Answer:	Actually the filament brand does matter. I have have several that suck. Personally I prefer Overture or Hatbox. If you Google Best PLA Filament there are several articles. I am about to try a different brand since I am tired of buying from China.
Question:	What's the difference of the upgraded Magic 3d printer and previous Magic
Answer:	The upgraded Magic is easy to install, compare with the previous one, most part are pre-assemble.
Question:	It is sample to assemble
Answer:	Most parts are previous assemble, you just to install three modular, usually take 15~20 minutes.
Question:	can PETG be used with this
Answer:	I have not used it yet but I believe its completely capable. Its a great printer.

Product features

JGMAKER Magic Upgraded 3D Ptinter Fast Assemble

• The Upgraded Magic is pre-assemble for most part, you will receive it with three modulars, only need to screen a few screw, less than 30 minutes to install.
• Built-in power supply design creates a more elegant appearance and a safer option than other power exposed printer

Filament Run-Out Detection

• Filament RUN-OUT detection: The machine beeps when your filament runs out to allow you to change the filament and avoid a failed print
• Power Fuilaur Detection: Resume printing from where the last print was stopped due to power failure. Saving you valuable time and filament
• Memory Function: Resume print due to SD card removed accidently, If for any reason you happen to remove the SD Card during the printing process, by reinserting the SD Card you can continue printing.

Fast Assemble

• Most part are pre-assemble before shipping, you will assemble it within 20 minutes.
• Adjust the nut under the hot bed to leveling the platform

Slice settings

• Import the STL file of the model into the slicing software, set the printing parameters

Model Printing

• Export Gcode file after slicing and then print the model

• Core XY structure design, full belt drive, higher stability and printing accuracy, ensure the quality of the model; Dual Z-axis design, increase the bearing capacity of the hot bed, reduce errors in printing, and print more finely.
• X5SA DIY assembly, providing complete parts and tools. The paper manual, SD card with an electronic version of the instructions and a link to the installation video. Assemble and debug by yourself, enjoy the fun of DIY assembly, possible to achieve unlimited innovation and transformation of appearance and performance, so as to meet your ideas and creativity. This process takes some time to install, debug and learn, which is quite challenging for novices, more recommended for experienced user.
• Silent motherboard and high quality power supply. TRONXY silent motherboard adopts German imported TMC ultra-quiet motor drive chip,allowing the printer always running at low decibels. 360W high-quality power supply, the power supply system is more stable and safe.
• Full functions, support Automatic leveling, Manual leveling, Filament detector, Power failure resume to print functions and other basic functions.
• If there is any questions when installing and using the 3D printer, you can contact us.TRONXY provides 1 year warranty and lifetime technical support and 24-hour professional customer service.In case of holidays, the after-sales service will reply asap on working days.(contact us: Your Amazon Buyer Account> Click Your Account> Your Orders> Find your order and click Contact Seller)

User questions & answers

Question:	Does this printer come with any filament
Answer:	It comes with a filament sample, but not a filament roll
Question:	mm or 3mm filament
Answer:	1.75mm
Question:	First does it have a heated bed, second can it print petg, and third does it have thermal runaway protection
Answer:	Yes to all there. However I do NOT recommended this print for beginners.
Question:	What board do you supply with the kit
Answer:	There is a terrible board that comes with the printer. The board also uses an OS that is not industry standard. After some issues with the printer and customer service, I bought an aftermarket product.

Product features

Product parameters

Print size: 330*330*400mm/13*13*15.7inch

Machine size: 650*545*655mm/25.6*21.5*25.8inch

Machine weight:13KG

Print speed: 20-100mm/s(advs 60mm/s)

Position accuracy: X/Y0.00625mm，Z0.00125mm

Nozzle size: 0.4mm(default)

Connection: USB interface , TF card

Thickness: 0.1mm-0.3mm(optional)

Nozzle temperature: ≤275°c

Hotbed temperature: Support, ≤100°c

Environmental temperature: 8-40°c ; Environmental humidity: 20-80%

Materials support: PLA, ABS, HIPS, PETG, WOOD, PC, PVC

Operation system: WINDOWS ; Slicing software: Tronxy Software

Operation software: Repetier-Host , Cura ; Files format: G-CODE

Power input: 110v/220v ac，50/60hz; Power output: 24v , 360w

Tronxy X5SA is a DIY desktop 3D printer with big volume build of 330*330*400mm

COREXY 3d printer structure

It uses XY motors to work together. Since the timing belt moves on a flat surface, printing is more stable.

1. High molding accuracy.

2. The machine is very stable even under high-speed operation.

3. The motherboard and power supply can be hidden, and the space utilization is large.

Ultra Silent Motherboard

TRONXY Silent motherboard has a built-in active noise reduction function, which modulates the voltage carrier to minimize the current wave, cancel out the noise, and make the noise reduction effect more obvious.

Support WIFI expansion, with WIFI interface.

Auto Leveling Sensor

16 points data collection,ensure hot bed leveling, at the same time, the height deviation of the hot bed is automatically compensated during printing, improve printing accuracy.

Filament Detector

Stop automatically and sound alert when the filament is used up or the filament is broken.

Resume print after power off

Resume printing after power outage or any other unexpected stoppage.

After the power is turned on, the operation interface can continue to print to avoid the waste of time and filament caused by unexpectedly stopping printing.

3.5inch full color touch screen

New experience, HD display. The interface is simple and easy to understand, making it easier during use.

On screen 3D model previews using the Tronxy slicer to generate g-code.

30pin cable design

Say goodbye to complicated and chaotic electricity line.

The appearance of teh printer is more concise and beautiful.

Upgrade to metal flange bearings

The bearings are stronger and have a longer service life

• 【S8 3D PRINTER with LARGE PRINT AREA】 With a generous print volume (310x310x400mm), the S8 3D Printer offers amazing print quality, making it one of the best 3D printers for professional use. S8 is incredibly reliable when it comes to producing 3D models, and the accuracy of the 3D results are incredibly impressive. If you need a 3D printer that can reliably reproduce many 3D objects accurately, the SUNLU S8 is a fantastic choice.
• 【VERY STABLE PRINTING】 There are 3 inductive end stop sensors separately set on the X, Y, and Z axis, These non-touch, high-precision limit switches can automatically calibrate and maintain good stability under high-speed printing. Most importantly, the printer features Synchronized Dual Z System, greatly increasing its printing stability. Also, the built-in branded power supply ensures stable and sufficient power.
• 【QUICK INSTALLATION】 When the S8 3D Printer arrives on your doorstep, it comes 95% pre-assembled, which makes installation as easy as can be. Additionally, the heated bed can heat up to 80C in 2 minutes and it only takes the 0.4mm nozzle about five minutes to heat up to 110°C. With the glass-smooth heated surface, it allows all types of filaments to easily stick on the build plate.
• 【FILAMENT RUN-OUT+ POWER LOSS DETECTION & RECOVERY】 Have you ever tripped over the power cord and lost a long hours print? The S8 will save you from destroyed prints caused by the loss of power. When it recovers from a power failure, the machine will resume the current print. Also, it will automatically pause your 3D print and notifies you when you've run out of filament, saving you time and money.
• 【SUNLU S8 QUALITY GUARANTEE】 Buy straight from the manufacturer to receive the 1-year limited manufacturer's warranty on your new 3D printer. With high customer satisfaction and excellent technical support. We are ready to help you. (Contact Us: Just click “Contact Seller” in your Amazon order history.)

Product features

Why choose SUNLU S8 3D Printer?

1. Fully Open Source: Allow users to improve their printer upon the source code and share the changes within the community, resulting in an improved experience for all.

2. Ideal Gift for Kids: This 95% Pre-Assembled 3D printer is a perfect gift for kid, allow them to learn about the basic construction of 3D printers.

3. Ideal for STEM Projects: Invite imagination and innovation to student, help them discover the wonders of all the STEM fields.

Resume Printing Function

SUNLU S8 3D Printer can resume printing after power outage or any other unexpected stoppage.

Fast heating

It only takes 2 minutes to 200 degrees. You don't need to wait for a long time to ensure fast heating to the printing platform.

Filament RUN-OUT detection

The machine stops printing when your filament runs out to allow you to change the filament and avoid a failed print

Memory card & USB stick printing

Memory card & USB stick printing：Convenient for daily use

S8 Large Size 3D Printer

EXTRA LARGE: This printer comes with one of the largest build spaces available. At 310mm*310mm*400mm, you can print models that 90% of other printers could not.

Glass Bed and Large Hand-twist Nuts

This printer comes stock with a reliable and flat glass bed. This glass bed ensures a 100% usable and flat surface for any print from the smallest test file to the largest model. Easy to level the bed with a large hand-twist nut.

• 【Ultra Silent Motherboard 3D printer】 The Ender-3 V2 built-in self-developed silent motherboard, which ensures smooth movement under 50DB. Compared to the Ender 3 and Ender 3 pro, a V2 design delivers users out-of-the-box experience and silence-oriented upgrades,Therefore, when you print the model at night, please don’t worry, it will not disturb your rest.
• 【Tempered Glass Print Bed】The Newest Ender 3 V2 desktop 3d Printer comes with a tempered carborundum glass print bed.The glass platform enables the hotbed heat up more quickly and prints adhere more better. Also the glass bed can resist more higher temparuture than the magnetic bed and have ultra smoothness even on the first layer.
• 【More User Friendly Design】X and Y-Axis belt tension for quick and fast adjustment. and better to improve dimensional accuracy.Rotary knob added on the extruder makes it easier to load and feed filament. Tool box integrated to the machine body for tools organization and storage.
• 【Carborundum Glass Platform】This platform enables the hotbed heat up quicker and prints adhere better without the warping, ultra smoothness even on the first layer. Which can easily realize rapid manual mold taking.
• 【UL Certified MeanWell Power Supply】Equipped with MeanWell power supply, produced by the listed company with mature technology, meeting all the needs of fast heating and long-time printing. Moreover, the power supply is concealed in the machine, making it much safer.Different with other fdm printers, the power suply of the Ender 3 v2 is insealed in the machine.

User questions & answers

Question:	Can I put a bl leveling on it
Answer:	Dear Matthew Thank you for a great question. If you are using Ender 3 Pro Settings for reference: Print temp: 200℃ Bed temp: 0-45℃ Print speed: 50mm/s Retraction: 5mm Cooling fan：100% Different printing equipment will have some differences, you can print a temporary temperature tower to test the best settings of your 3D printer Hope that make sense to you?
Question:	what is the difference between comgrow and Aystkniet ? the quality and other
Answer:	/Duration -:-Loaded: 0%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:00 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } The phosphorescent substance in PLA filament can quickly absorb light energy and emit light in the dark. As shown in the video, For better results, we recommend exposing the model to sunlight or ultraviolet light for 15 minutes. Have a good day
Question:	Does it use 1.75mm filament like the Ender 3 Pro version 1 or not
Answer:	It's PLA. You don't need to heat your bed at all, and you should have the tip set to 200 degrees celcius, not 215. At higher temperatures, the plastic is far too malleable and will cause stringing. 205 is the max you would want it at. 200 is the minimum. Ideally run it at 30 millimeters a second print speed for 0.2 layer heights. 0.4 layer heights are ok to run at 60

Product features

Creality 3D Ender 3V2

Creality Ender 3 V2 has a updated mainboard with silent TMC2208 stepper drivers. Compared to the Ender 3 and Ender 3 pro, a V2 design delivers users out-of-the-box experience and silence-oriented upgrades. No more annoys when you start a long print times with over night printing.

Effortless Filament Feed-in

Rotary knob added on the extruder makes it easier to load and feed filament.

Self-Developed Silent Motherboard

The self—developed silent motherboard always ensures smooth movement under 50dB, no noise during printing.

Famous brand Meanwell power is suitable for different voltages under 115V / 230V.

Brand New User Interface

Ender-3 V2 changes the previous screen into 4.3inch color screen and upgrades the user experience with the newly designed operation UI system. It’s simple and quick to operate. And also this color screen can remove easily to repair, which saves a lot time and energy.

New Injection Tensioner

The XY-axis tensioner supports adjusting the belt tension in a quick and more convenient way.

Carborundum Glass Platform

The carborundum glass platform enables the hotbed heat up quicker and prints adhere better.

Ultra smoothness even on the first layer.

V-guide Rail with High Standard Stabe to Print

Ender-3 V2 uses the V-guide rail pulley with stable movement, low noise, wear resistance and longer life.

• 【Versatile Compatibility】The UV LED wavelength ranges of SUNLU UV resin curing light is 405nm. It is compatible with most standard 405nm resin, suitable for most LCD, DLP, or SLA 3D Printed objects in the market.
• 【405nm High Powered 60W LED Strip】The UV light is composed of 6 high powered 405nm UV LED lights that can fully cure the printed model in minutes. Once cured the part will no longer have any uncured residue on the surface. After the curing process the printed part will also be much harder and durable as well.
• 【Intelligent Time Control】Quick acting button to control curing time from 0s to 6mins, which save your time and enable you to control the curing time conveniently, No need to worry about discoloration due to long curing time of the model.
• 【360°Rotating Turntable Included】SUNLU UV Resin Curing Light Box is equipped with 360°Rotating Turntable and has a rotation speed of approximately 10 revolutions per minute.With this turntable, you will never need to worry the uneven curing of your beloved models.
• 【User-friendly Design&1 Year Guaranteed After-Sales Service】SUNLU UV Resin Curing Box With special optical filter material, ultraviolet rays are kept away from leakage to ensure excellent curing effect.

User questions & answers

Question:	Is this better than just letting the print sit in the sun
Answer:	It gets to 120 in about 1.5 minutes. I don't think it would have any problem with 150.
Question:	Bought a 405nm lamp did not work left it tacky so Will this cure a acrylic with resin on it
Answer:	It's hard to say how many amps it will draw since it will be pwm controlled
Question:	Uv curing ultraviolet cure resini use this but someone said they use elegoo standard photopolymer so you need this kind for the box
Answer:	hello , the silicon heating pad is 120V. We do not think it could plug to 230V ac.
Question:	Can I put my plants in here also
Answer:	this silicon pad is 120V. please check your tevo tornado is suitable it or not.

• 【Integrated Structure Design】Easy to assemble and maintain with integrated structure and modular design. All lines are concealed in the machine. It’s more convenient and safer for you to operate.
• Resume Printing Function】The machine can automatically resume printing when power comes on. It won’t print from scratch once meeting filament breakage, saving time and avoiding waste.
• 【Semi-Assembled Kit】This easy-to-setup kit comes partially assembled, enabling you to learn about the basic construction of 3D printers as you finish putting it together.
• 【Removable Build Surface Plate】Auqila uses carborundum glass platform, enables the building platform heat up in 5 minutes and prints adhere better without the warping. Ultra smoothness even on the first layer.
• 【After-sale Service】All Voxelab 3d printers are provided lifetime technical assistance and a one-year warranty. If you have any problem with your printer, you can email us to replace the original part or contact Amazon to replace new one.

User questions & answers

Question:	Where can you order spare parts from
Answer:	I know the Voxelab website has spare parts for sale. Also, one of the papers that came with the machine should have a contact website/number where you can just get more from them.
Question:	does this have 110 power cord or does it require 220 outlet
Answer:	Standard 110v plug. Power supply has a switch to change incoming voltage.
Question:	What's the difference between this one and the other voxelab aquila 3d printer on amazon? (orange moose main pic vs red deer
Answer:	same printer with different 3d print on the glass.. Voxelab only made this one version of the FDM printer...
Question:	Can this print files from Thingverse? Also, what would be a good program for a newbie to 3D printing to design my own works with
Answer:	yes this printer can print thingiverse .stl files you download and put on your sd card.. I use cura to slice or you ac use the provided software on their website, stated in the manual.. for a basic 3D design software you can use tinkercad (free). and then work your way up or try fusion 360 the free version

Product features

About Voxelab:

Voxelab is the sub-brand of FLASHFORGE, which is one of the world leading manufacturing enterprises of professional 3D printing equipment and materials. It focuses on the research, design, and production of 3D printers and related 3D printing products.

Voxelab Aquila 3D Printer with Integrated Structure Design

• Molding technology: FDM
• Nozzle diameter: 0.4mm
• Nozzle temperature:≤250℃
• Hotbed temperature: ≤100℃
• Layer thickness: 0.1-0.4mm
• XY axis precision: ±0.2mm
• Filament diameter: 1.75mm
• Print speed: ≤180mm/s, 20-60mm/s normally
• Printer size: 475*480*473(620)mm
• Slicer software: Simplify/Cura/Voxelmaker Support OS: MAC OS/WindowsXP/7/8/10

Integrated Structure Design

Classic appearance in an integrated all-metal body inherited from, that's more reliable and easier to use. All lines are concealed in the machine. It’s more convenient and safer.

Resume Printing Function

Intelligent Sensor. Safely protect the power supply, with resume printing function, can help achieving long-time printing.

Carborundum Glass Platform

Enable the hotbed heat up quicker and prints adhere better without the warping. Ultra smoothness even on the first layer.

High Standard V-guide Rail

Adopted the V-guide rail with stable movement & low noise & wear resistance & longer lifespan.

Brand New Tensioner

Brand new XY-axis tensioner can adjust the belt tensioner quickly and conveniently.

Compatible with 1.75mm Filaments

Aquila is compatible with all 1.75mm Filaments. Use Voxelab pla filament to get better printing results.

• ☛ Ultra Silent Motherboard, The Ender-3 V2 built-in self-developed silent motherboard, which ensures smooth movement under 50DB. Therefore, when you print the model at night, please don’t worry, it will not disturb your rest.
• ☛ Effortless Filament Feed-in, The Ender-3 V2 adds a rotary knob on the extruder, making loading and feeding filament process much easier, sometimes, the extrusion clamp is easy to be broken, so the rotary knob is a very friendly design.
• ☛ Carborundum Glass Platform, This platform enables the hotbed heat up quicker and prints adhere better without the warping, ultra smoothness even on the first layer. Which can easily realize rapid manual mold taking.
• ☛ Resume Printing Function, Resume printing function can resume printing from the last recorded extruder position after suffering unexpected power outages, saving your time and reducing filament waste.
• 【Satisfaction After-sale Service】We produce with meticulous and enthusiasm, we are sure you will love it, if not, we offer 90 days no questions replacement or money back.

User questions & answers

Question:	What software comes with this product
Answer:	It comes with a Creality slicer on the SD card. Cura is free so don’t pay more. Just a quick download.
Question:	Can I put a bl leveling on it
Answer:	yes, It can used BL Touch. But you need to build your a stand to install BL touch.
Question:	Does the upgrade aluminum mk8 extruder work on this one
Answer:	Yes, it does
Question:	What board version does this ship with
Answer:	Purchased Dec 2020, received a 4.2.2 board.

Product features

Advantage

• Silent Motherboard, The self-developed silent motherboard always ensures smooth movement under 50DB, no noise during printing.
• Meanwell Power Supply, Famous brand Meanwell power is suitable for different voltage under 115V / 230V.
• Resume Printing, When the printing consumables are used up or the power is cut off unexpectedly, the machine will automatically perform the protection process, and the work can be continued after power on.
• Carborundum Glass Platform, The carborundum glass platform has the advantages of strong adhesion, rapid temperature rise in 5 minutes, and no warpage of the printed model, which can realize rapid manual mold taking.
• Humanized Design, New tool box function is added, which can make it more convenient and quicker for tools organization and storage.
• New Tensioner, The new XY axis tensioner can quickly adjust the belt tightness, which is convenient and quick.
• Elegant Appearance, Continuing the>
• Integrated Structure Design, Easy to assembly and maintain with integrated structure and modular design, the power supply is concealed in the machine making it much safer.

Self-developed Silent Motherboard

Resume Printing Function

Effortless Filament Feed-in

XY Axis Tensioner

4.3 inch HD Color Screen

Convenient Tool Box

Carborundum Glass Platform

V-slot with High Standard

MeanWell Power Supply

Specifications

• Molding technology:FDM
• Print size:220x220x250mm
• Hot bed temperature:under 100 ℃
• Resolution:+/- 0.1mm
• Printing thickness:0.1-0.4mm
• Printing supplies:PLA/TPU/PETG
• Computer operating system: MAC/Windows XP/7/8/10
• Slicing software:Simplify3d/Cura
• Product weight:7.8kg
• Product size:475x470x620mm

Buyers Show

• FAST HEATING & RESUME PRINT： The heated bed can reach its operating temperature in just five minutes. The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
• PRINTING STABILITY： Improvements to the Y axis improve stability, and the alteration of the control box unit move the fan to the bottom of the unit, Make every printing works perfectly
• REMOVE EASILY:Our all new magnetic bed surface for easy model removal is included stock on the Ender 3 Pro. Easily remove the magnetic print surface from the hotbed and remove models with no spatula or razor necessary.
• BRAND POWER SUPPLY:The brand power supply delivers more power with a stable output ensuring the temperature fluctuations are minimized, especially during long and intensive prints. Heat the hotbed faster and to higher temperatures before making the Ender 3 Pro a much better option for printing ABS and other high temperature high strength filaments.
• OFFICIAL CREALITY 3D AMAZON STORE. All of our products come with a 18 Months limited replacement part and lifetime technical support.We provide original part for after sale.more than 20 engineers provide professional customer service.

User questions & answers

Question:	If i order the ender 3 pro today. will it come with the 1.1.5 mainboard? if i am buying new i would expect it to be the latest design
Answer:	Dear Customer, Thank you for your question. Sorry, this ender 3pro with the 1.1.4 mainboard, the 1.1.5 is the silent mainboard. You could purchase it in below link. https://www.amazon.com/Creality-3D-Upgrade-Motherboard-Mainboard/dp/B07TJNX4FB?ref_=ast_sto_dp&th=1&psc=1 Thanks. Best wish Creality 3D Direct
Question:	does it ship with us power plug the last pic show not us plug
Answer:	Yes, a normal 120v 3 prong plug.
Question:	Has this printer have removable timing pulleys
Answer:	The printer is essentially a big kit that you assemble (with a good deal of it pre-assembled for you). So, technically you could change out almost every part of this printer.
Question:	i've just got it, im new starter, Anyone knows what software type that i can learn create/design printed model (website/link), thank you
Answer:	When you are just starting I highly recommend tinker cad. I started creating on there and it made it very easy starting and I learned more about my ender3 as well. Now after 2 years I’m using more complex software and even sculpting using zbrush but I have a soft spot because of how easy tinker cad is to use. I am even using it to help my daughter understand complex shapes all can be made using simple designs. Start small then build big.

Product features

More stable, More durable, Easier to operate.

Ender-3 Pro is an upgraded version of Ender-3, upgrade power supply, magnetic build surface plate, aluminum extrusion. Ender 3 Pro is the most suitable printer for beginners.

Easy to install

• Only 10 minutes with 20 screws assembly before the first printing, simple assembly but more stable performance, Win-Win for fun and time.

Safe Power Supply:

• Ender 3 Pro comes with a Mean Well UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.

Update Triangle-Slot

• Triangle-Slot cooperate with Prusa I3 frame: extremely innovative design, following the step of the trend, integrating with classic elements, create a new generation economic DIY 3D printers.

Patent Technology

• Upgraded extruder greatly reduces plugging risk and bad extrusion; Patent Technology: Triangle-Slot with POM wheel make it move noiseless, smoothly and durable

Magnetic Build Surface

• Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.

Improved Mechanical Properties

• The Ender 3 Pro has been redesigned with a more sturdy, 40×40 aluminum extrusion for the Y-axis base. This should improve the overall stability of the printing surface.

Large Build Volume

The 8.7 x 8.7 x 9.8" (220x220x250mm) build area allows you to create large and complex models.