12 best 3d printer scanner combo

• REMOVABLE BUILD SURFACE PLATE: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
• SAFE POWER SUPPLY: Ender 3 Pro comes with a UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.
• RESUME PRINT FUNCTION: Ender 3 Pro can resume printing from the last recorded extruder position after suffering unexpected power outages.
• SEMI-ASSEMBLED KIT: This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish putting it together. A fun STEM educational experience in mechanical engineering and electronics.
• WHAT YOU GET: Ceality Ender 3 Pro 3D pinrter, lifetime technical assistance and 24 hours professional customer service.

User questions & answers

Question:	What version is the board
Answer:	The newest version of the board is 1.1.5, it does not come with the printer though. Mine came with 1.1.4 which is very similar to the 1.1.3. Creality Sells the 1.1.5 separately right now as the Creality v1.1.5 Silent Main Board. It is $50 bucks and you might find it cheaper but it is a worthwhile upgrade. It has newer stepper drivers that make the stepper motors virtually silent. I can't hear them anymore only the fans now. The board also has thermal runaway enabled and has a boot loader preinstalled so if you wanted to switch to Vanilla Marlin or the TH3D software you could do so very easily. Installing this board and the TH3D software also made adding a BL Touch kit easy.
Question:	Will this printer print abs and petg also
Answer:	From the list of questions and answers on the product page, "Will this printer print abs and petg also? Answer: Yes, but for abs recommend getting a glass bed and an enclosure of some sort. By Cameron Moss on December 25, 2018
Question:	What is the physical footprint of this unit
Answer:	The actual base footprint itself requires a flat 12" x 12" surface, however certain parts such as the display panel overhang requiring a bit more space. A roughly 16" wide by about 20" deep space should be about right, although you will want to make sure both the back and front have an additional few inches to spare as the bed does move back and forth during operation. I mount mine on top of a 16" x 18" patio paver block for support and stability. I place the paver block over some dense foam that is cut about 1" in from the block edge (14" x 16"). This gives the printer a platform that helps contribute mass to absorb vibrations as well as offer a bid of noise reduction cause by sound transmission through the base. Placed a few inches from the back wall it also ensures the printer travel area remains clear. There is also YouTube video on using this technique if interested (not mine but I came across it after I came up with the same idea separately).
Question:	Does it come with any needed software? If so - what kind
Answer:	It does come with a very old version of Cura. The lastest version of Cura is what I am using. Just download it from https://ultimaker.com/en/products/ultimaker-cura-software/list. If all you are doing is downloading models and printing this is all you need. If you want to make your own 3D models that complicates things. There are many, many 3d modeling programs and which one to use is a very personal choice and each takes time to learn to use. Blender is free, Sketch-up is also I think. But there are commercial programs that can cost up to a couple of thousand to use. Zbrush, Studio Max, and others. This is list of most of them: https://all3dp.com/1/best-free-3d-modeling-software-3d-cad-3d-design-software/ Without a better idea what you are wanting to do, this is the best answer in a short space I can give.

Product features

Why choose Creality 3D Ender 3 Pro 3D Printer?

1. Fully Open Source: Allow users to improve their printer upon the source code and share the changes within the community, resulting in an improved experience for all.

2. Ideal Gift for Kids: This semi-assembled kit 3D printer is a perfect gift for kid, allow them to learn about the basic construction of 3D printers.

3. Ideal for STEM Projects: Invite imagination and innovation to student, help them discover the wonders of all the STEM fields.

Resume Printing Function

Ender 3 Pro can resume printing after power outage or any other unexpected stoppage.

Meanwell Power Supply

Branded power supply and high-watt hot bed ensure fast heating to the printing platform.

Upgraded Extruder Design

Greatly reduces the risk of clogged nozzle and bad extrusion.

• STRONG STABILITY:Integrated sheet metal body,Smooth bears and rods,High torque stepper motor,upgraded MK8 extruder,The main motherboard contained 32 bits ARM core,A4988 motor drivers,3.2 inch touch screen,Integrated heating bed,220/110V touch power switch.
• MULTI-MATERIALS:Enclosed environment,and high temperature heating bed,support PLA,ABS,PETG,HIPS,TPU,RUBBER,FLEXIBLE,WOOD,CARBON FIBER Filaments
• FILAMENT RUN OUT WARNING & RESUME PRINT:When filament run out ,it will auto pause and utter a sound,when you replace the new filament,and continue to print . The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
• REMOVE EASILY:Using magnetic bed surface for easy model removal . Easily remove the magnetic print surface from the hotbed and remove models with no spatula or razor necessary.
• WARRANTY AFTER-SALES: 12 Months Warranty ,We provide original part for after sale.and will provide professional customer service within 24 hours.

User questions & answers

Question:	what Firmware does this printer use
Answer:	The board main core is Arm with 32 bits, The Firmware is similar to Reprap,we developed it,we can give it to customer for free,it is easy to use ,thanks!
Question:	what kind of material i have to buy for use this printer? can you some number
Answer:	This printer support most materials,as PLA,ABS,PETG,HIPS,carbon firber,wood ,tpu (flexible),so you can buy those what you want to print,we suggest you can print start PLA firstly,Btw we have putted one roll PLA filament into the printer,if you buy this printer,you can use it directly,thank you!
Question:	Can auto bed leveling be added
Answer:	No,it has already supported semi-bed leveling,according customer feedbacks,it is more practical and useful for users,thank you!
Question:	What are contents of the box
Answer:	In the box comes the printer completely assembled, ready to use, it comes with the USB cable to connect it, a microSSD with PDF manual, an example model ready to print, three STL files of examples, a small box containing a USB adapter -microSSD, tools and spare parts in case you need them (very useful for a beginner like me with 3D printers) and a spool of PLA filament. And most importantly, it doesn't come in the box, which is the excellent technical support they offer.

Product features

HUAFAST 3D Printer HS-Mini S with Multi-features

• Ultra high Precision
• Metal cabinet
• Color touch screen
• Closed environment
• Magnetic platform
• Power off resume
• Filament detective warning

SUPER STABILTY

laser cutting and shaping of integrated sheet metal chassis makes the machine super-stable,the prototype has been tested continuously for more than three months, and printing time exceeds 2000 hours.

VARIOUS MATERIALS

Enclosed environment system,it can printing over 10 different kinds of materials,as PLA,ABS,PETG,HIPS,Wooden,TPU,Flexible,Rubber,Carbon Fiber.

ULTRA HIGH PRECISION

Normal 0.1mm high-precision printing;

Default nozzle size:0.4mm

Type:MK8

Color touch screen

• 3.2 inch tft mks touch screen
• simple operation
• simple interface
• friendly UI
• six languages

Power off resume

When unexpected power failure occurs,the printer will automatically save the print data and record the current position,after the power is restored, the printer can resume the printing function with one click, so that the printing will not be afraid the failure.

Filement detection warning

It supports 5 points leveling

It will be more and more useful and practical for new users,intelligent leveling,easy to print,you will print awesome models quickly.

• Self-developed Silent Motherboard: The Ender-3 V2 built-in self-developed silent motherboard, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
• UL Certified MeanWell Power Supply: Equipped with MeanWell power supply, produced by the listed company with mature technology, meeting all the needs of fast heating and long-time printing. Moreover, the power supply is concealed in the machine, making it much safer.
• Effortless Filament Feed-in: Ender-3 V2 adds a rotary knob on the extruder, making loading and feeding filament process much easier; Brand new operation UI system and 4.3" smart color screen greatly improve user experience.
• Resume Printing Function: Can resume printing from the last recorded extruder position after suffering unexpected power outages, saving your time and reducing waste.
• Carborundum Glass Platform: Enable the hotbed heat up quicker and prints adhere better without the warping. Ultra smoothness even on the first layer.

User questions & answers

Question:	Does this package come with the spoil holder shown in the first picture
Answer:	Yes, it should come with a spool holder.
Question:	does this printer have thermal run away protection built in the firmware
Answer:	At the time I got mine no it was not but it is not difficult to upload new firmware once you install a boot loader. I have heard that the newer ones do have it enableled
Question:	Does this have auto leveling or manual leveling
Answer:	Manual leveling.
Question:	What software comes with this product? i see retailers offering simplify3d and cura with this printer
Answer:	It comes with a Creality slicer on the SD card. Cura is free so don’t pay more. Just a quick download. Bam. Done. Use the Ender 3 Pro profile. I use Tinkercad for modeling. Also free.

Product features

Why choose Creality 3D Ender-3 V2 3D Printer?

Self-developed Silent Motherboard

The self-developed silent motherboard ensure smooth movement under 50db, no noise during printing.

V-guide Rail with High Standard Stabe to Print

Ender-3 V2 uses the V-guide rail pulley with stable movement, low noise, wear resistance and longer life.

Effortless Filament Feed-in

Rotary knob added on the extruder makes it easier to load and feed filament.

New Injection Tensioner

The XY-axis tensioner supports adjusting the belt tension in a quick and more convenient way.

Brand New User Interface

Ender-3 V2 changes the previous screen into 4.3inch color screen and upgrades the user experience with the newly designed operation UI system. It’s simple and quick to operate. And also this color screen can remove easily to repair, which saves a lot time and energy.

Smart Add-ons

With the tool box integrated to the machine body it is more convenient and quicker for tools organization and storage.

Product description

The Dremel DigiLab 3D20 Idea Builder 3D Printer is Dremel's most reliable low-cost 3D printer for hobbyists, tinkerers and other users new to 3D printing. The simple design of the printer along with Dremel support team will help you succeed at 3D printing, even without prior experience! The printer comes fully assembled and includes a 0.5 kg spool of Dremel filament. The easy to follow quick-start guide and detailed instructions will help you begin printing right out of the box. Immediately, you will notice the attention to safety with the rigid, fully-enclosed design and 3rd party UL approval. The printer is designed to print with PLA filament onto a non-heated build plate that uses black build tape to help your prints adhere to the build plate. You can begin your printing with the high-quality models pre-loaded on the printer, which can be accessed through the 4” full-color touch screen. You can load your own files from sites such as Thingiverse, with the included Dremel 3D slicer software. An upcoming update will allow the 3D20 to use .gcode files so you can use Dremel Digilab 3D Slicer, Cura, Craftware, KISSlicer, Simplify3D, Slic3r, Repetier, and other programs to load your print files. Once you start slicing your own files you can take full advantage of the 9” x 5.9” x 5.5” build plate and 100 micron high resolution. The simple design of the extruder allows for easy maintenance with continued use of the printer. With 85 years of reliable quality, Dremel is an established brand that you can trust to support you throughout your journey. By purchasing a Dremel 3D printer, you will have access to Dremel video tutorials as well as unrivaled Dremel customer service. All the help you need will be just a quick email, live chat or phone call away. This is Dremel's most affordable 3D printer and is perfect for new users or for students. Electrical Input Rating - 120 V, 60 Hz, 1.2 amp.

• Countless hours of high quality printing with the most reliable low-cost 3D printer
• Quickly and easily make your 1st print out of the box with completely pre-assembled printer, included 0.5 kilogram spool of filament and clear setup instructions. Maximum build depth (inches): 9
• Far superior safety compared to competition with fully enclosed design, non-heated build plate, PLA-only printing and 3rd party UL safety approval
• Compatibility with brand new Dremel Digilab 3D Slicer based on cura, the industry leading open source 3D printing software and gcode files so you can use your favorite slicer
• Accompanied by unparalleled local Dremel customer service support and industry’s best 1-year warranty. Extruder temperature: Up to 230°C /397°F

User questions & answers

Question:	Will this work with .obj files
Answer:	Yes. The Dremel 3D software is compatible with both .OBJ and .STL files.
Question:	Does it use a Proprietary filament or can it use any standard 1.75 PLA purchased from Amazon
Answer:	According to Dremel -> The Dremel 3D Idea Builder was designed and optimized for use Dremel PLA filament. Other filament may cause damage to the machine and will void the warranty.That being said because the filament by Dremel was not available at the time I did my review and I ran out of the original dremel filament I did buy replacement filament by 3D Solutech (1.75 PLA 2.2lbs spool) and will confirm it works. The spool does not "lock" into the printer, however it does fit in the spool grooves and still rotates and feeds into the print head with no issues. Just know that going non-dremel brand you may lose your warranty. You could if you wanted to wind filmant onto the dremel spool and get it to "sit/lock" correctly if you are concerned about it. For me it works perfect without locking it in and placing it in the spool groove at the bottom of the printer.
Question:	what can't the 3d printer make
Answer:	Puppies. Unless you are talking about small plastic puppies. Then it can do that. Real puppies though, not at all
Question:	Is it possible to print a copy of this Dremel 3d printer so I could then reurn the original printer to Amazon and just use the printed printer
Answer:	Yes, but dont stop there... you can create copies with the copies. After only a few generations you will have thousands of printers and can retire rich!

Product features

Best-in-Class Reliability

The Dremel 3D20 is the most reliable consumer-grade 3D printer on the market. Every Dremel 3D20 has been rigorously tested to ensure reliable printing time and time again. Furthermore, Dremel filaments are specifically engineered to optimize printing.

Get Started Immediately

It’s quick and easy to begin 3D printing. Our open system gives you the ability to download and print free models from around the web. You can also create your own designs by using any CAD software to bring your imagination to life.

Trusted By Makers

Makers have trusted Dremel since 1932 because of the quality and versatility of our products. We have been there for you over the years, and we will continue to be there with you in the future. Make More!

Full-Color LCD Touch Screen

Interact directly with the 3D20 through its full-color LCD touch screen. The interface allows you to modify settings, lookup files in the SD card, and print in a smooth fashion.

Fully Enclosed

The 3D20 is fully enclosed to maximize the printing success rate by creating a stable temperature inside. This also protects children from sticking their hands into the work area during prints.

PLA Filament

Dremel’s non-toxic, recyclable, plant-based PLA filament is safe to use at home and around children. It has been engineered for optimal printing, producing a stable, strong object with a high-quality finish.

Industry's 1-Year Warranty

If something goes wrong with your 3D20 3D printer, rest assured that we will have your 3D printer fixed in no time at no cost to you. Know more in our official website.

More Than Just A 3D Printer

In a world full of 3D printing startups, Dremel provides you with an entire ecosystem of benefits that goes beyond the 3D printer hardware. In addition to our reliable 3D printer, you will get our:

• The first generation product of Snapmaker: Snapmaker Original has three interchangeable functional modules, 3D printing, CNC carving and engraving.
• High precision with its all metal build: the all metal frame allows high quality prints. Snapmaker 3-in-1 3D printer can be widely used in many areas: personal hobbies, parent-child study, STEAM Education and rapid prototyping.
• Powerful and easy software:all the tasks for three functions can be done with Snapmakerjs,which helps entry level users to complete the work quickly. The Snapmakerjs updates regularly with new features to enable users have great experience on using it.
• Inspire or Get Inspired by the Friendly Community: Snapmaker owns a friendly user community on Facebook page and forum in case you need any helps. More than 13000 active users are waiting for you to share the fun of creating. You will get quick responses after you post in the group.
• Guarantees and technical support:Your Snapmaker will be fixed or replaced during warranty period, if you have any queries about Snapmaker 3-in-1 3D printer,email or send Facebook message to our support team. We will reply back to your email within 24 hours, or get the phone number from the Snapmaker official website and contact us for real time response.

User questions & answers

Question:	buenas tardes, se puede grabar en boligrafos
Answer:	Yes. We can use the laser level to install wall& floor tile, picture hanging, closet installation and so on.
Question:	is this worth the price with such a small build volume
Answer:	Sorry I cannot answer you well about this problem. But our WK3CG, WK2CG, WK2V1CG Smart R green laser level all can be used for square floor tile lay out.
Question:	So the laser engraver is advertised as a 500 mW laser, but now you are saying it's only a 200 mW laser. Why the deception in your advertising
Answer:	Doesn't work very well during the day.
Question:	Can this product engrave a longboard/skateboard
Answer:	Yes it supports working outdoor with a receiver in pulse mode. All you need is just press the mode switch.

• Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs.
• Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
• Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable.
• Safety Protected Power Supply: Only needs 5 minutes for hot bed to reach 110℃.
• Strict Test: Strict testing for key components before delivery and life-time technical supports available.

User questions & answers

Question:	I am looking to purchase a 3D printer as a gift for a beginner. Does anyone have any recommendations? Thank you
Answer:	My son is 15 and he handpicked this one as a gift. He doesn’t know that I’ve purchased it, but he was very adamant that this was the best one. If the recipient is very technically inclined, I think it would be a great fit. I’ve read tons of reviews and watched several on YouTube. Once it’s properly assembled ( does seem to take some time), then operation is suitable for a beginner (again, must be very technically inclined). My son did request a different type of filament that I also purchased on Amazon, because the included roll isn’t that great. I don’t remember which one I purchased, but it was about 20.00. He also suggested getting or building a table to sit it on, as you should not sit it directly on the floor. He’s making one to put beside his desk, but I’m sure any small table would do. I’m very excited myself to see it in action, but I guess I’ll have to wait until Christmas.
Question:	Does the creality ender 3 has the dual extruders like the bibo 3d printer
Answer:	No, but. You could upgrade it if you have the expertise
Question:	Hi. Purchasing for my young granddaughter. will I need to purchase anything else with the unit in order to use it christmas day
Answer:	You also need the filament sold on spools. It comes in many colors. The filament is the actual product that is used to make the 3D creation.
Question:	Seriously how difficult is the build
Answer:	It is very straightforward, but the downloadable PDF instructions leave a lot to be desired. I highly recommend using the top-rated "how to build" video, along with the PDF. Here is a link to that video: https://www.youtube.com/watch?v=me8Qrwh907Q The video contains a huge number of hints which, having now completed my first 3D print, which was 100% successful, I can now fully appreciate. The video helps you get everything square, and makes sure that many minor adjustments which were not done perfectly at the factory, are tweaked just right.

Product features

Fully Open Source

Allow users to improve their printer upon the source code and share the changes within the community, resulting in an improved experience for all.

Branded power supply

Branded power supply and high-watt hot bed ensure fast heating to the printing platform.

Resume Printing Function

Ender 3 can resume printing after power outage or any other unexpected stoppage.

Upgraded Extruder Design

Greatly reduces the risk of clogged nozzle and bad extrusion.

High Precision Printing

Allow you to print high precision models, creat your own world.

Suitable gift for kids

This semi-assembled kit 3D printer is a perfect gift for kids, allow them to learn about the basic construction of 3D printers.

Ideal for STEM Projects

Invite imagination and innovation to student, help them discover the wonders of all the STEM fields.

• The X-PLUS with pioneered creation of two different ways for placing the filament. Ventilative printing or enclosed constant temperature printing for you to choose when printing the different types of filament.
• The X-PLUS 3D Printer Kit comes with two different types of extruder assembly. The extruder A had already been installed on the printer. The max printing temperature is 250C, and it can works well with PLA, ABS, TPU. And for extruder B, free to you if you need. The maximum printing temperature is 300C, and can print Nylon, Carbon Fiber, PC. (The latest development, free trial).
• Double Z-axis driver, ensures more stable and more precise printing quality when you print large model size. Higher configuration 3D printer.
• Latest slicer software version 5.0: Redesigned UI interface of QIDI software is smarter and more convenient to operate. It has changed the software's slicing algorithm and improves the print quality by 30 percent and speed by 20 percent. The QIDI software is compatible with all types of QIDI printer, life-time free, an alternative to paid software.(If yours is the old version, please download the latest version on QIDI official website).
• Backed by with One-to-one QIDI TECH service. If you have queries about 3D Printer, feel free to contact our exclusive and fast support service team, we'll reply back to you within 24 hours. Free One-year warranty is also guaranteed.

User questions & answers

Question:	Is the qidi 3d yellow banner removable? i understand branding, but it's a bit of an eyesore
Answer:	You can take it off but it will leave the glue on and it is a long process to remove.
Question:	Is the only difference between x-plus and max the bed size? i noticed the max doesn't list carbon printing - is that feature not available there
Answer:	The main differences between the X-Max and X-Plus are the build volumes (Max= 300x250x300mm vs Plus= 270x200x200mm) and the touch screen (Max=5" vs Plus= 4.3"). They both can print the same materials, including Carbon Fiber, Polycarbonate, PC/ABS, & Nylon using the Hi-Temp print head that has a hardened steel nozzle to prevent wear when using abrasive filaments. Hope that helps.
Question:	Is this a dual extruder printer like bibo 3d printer
Answer:	No, it is a single extruder. The additional extruder they include or send at customer request is an upgraded single extruder module.
Question:	How does this printer compare with the prusa i3 mk3? they are at the same price point but i would have to wait several weeks for the prusa
Answer:	The guy that sits next to me at work got the same Prusa kit. He feels like the QIDI X-Plus may out perform his. Also, my build capacity is a bit larger than his. He likes the PEI surface on the Prusa. My only mild complaint is having to exchange extruders for the over 250C range, but I think I get smoother prints with my low temp extruder that he does with the general purpose extruder on the Prusa. Also, he regrets not having an enclosure like mine has. We compare prints all day long, so after he spent an entire day and night building his & I was up and running in 10 minutes, I want to buy another one! I also got mine in 2 days & I have almost immediate answers from support 24/7, no matter how trivial. They are amazing! It took a couple of weeks to get the Prusa. He was so jealous!

Product features

Double Z-axis:

Updated the Single Z-axis to Double Z-axis, more stable and solid for large size prints.

Innovative design of double z-axis motor structure with 4 pieces imported 10MM axis.

Maximum print size is 10.6''x7.9''x7.9''(270(L) X 200(W) X 200(H)mm)

Newly Developed Extruder:

Two Sets of QIDI Third Generation Extruder Assembly with Different Capability

Extruder A : For printing general material such as PLA, ABS, TPU (Already installed on the printer).

Extruder B : For printing advanced material such as Nylon, Carbo Fiber, PC

Two Different Ways for Placing the Filament:

The pioneered creation of the two different ways for placing the Filament.

A. Place the filament outside: The filament feed more smoothly while printing PLA, TPU, PETG. It is compatible with any brands of 1.75mm filament.

B. Place the filament inside: For printing advanced material such as Nylon, Carbon Fiber, PC, which requires an enclosed constant temperature printing.

4.3 inch Touchscreen:

4.3- inch touch screen with large and use friendly interface. During whole process, you're well instructed on the touchscreen display, make it more intuitive, and more precise and easier to operate.

Removable Plate:

Movable extraction, curved metal plate, can be used repeatedly, it is more convenient to remove the model after printing. And meanwhile, can minimize the damages or offsets to the build plate.

The plate's front side can print normal filaments, such as PLA, ABS,TPU,PETG.

The plate's reverse side can print advanced material such as Nylon, Carbon Fiber, PC.

QIDI Print Slicer:

Latest slicer software version 5.0: Redesigned UI interface of QIDI software is smarter and more convenient to operate. It has changed the software's slicing algorithm and improves the print quality by 30 percent and speed by 20 percent. The QIDI software is compatible with all types of QIDI printer, life-time free, an alternative to paid software.(If yours is the old version, please download the latest version on QIDI official website).

QIDI TECH One-to-one Service:

If any problems with the X-Plus 3d printer, please contact Qidi Tech team and we will reply in 12 hours.

Product description

Meet the new kid on the block, the user-friendly, home-friendly, and wallet-friendly 3D printer from FlashForge is ready to play. Loaded with easy-to-use features, and designed to be at home in kids rooms and classrooms, the new FlashForge Finder is the first choice for 3D printing novices and educators. Beginners benefit from the slide-in build plate, assisted bed-leveling, and intuitive color touchscreen. And parents and teachers appreciate its quiet and safe operation. The Finder uses only non-toxic PLA, and the heated components are safely encased. The creative world of 3D printing awaits, and the FlashForge Finder is here to show you the way. What’s in the box? Quick start guide, After-sales service card, Power cable, Filament guide tube, Tool bag, Finder 3D Printer, Start-up PLA filament, Power adapter, USB cable, Solid glue. Printing technology- FFF (Fused Filament Fabrication). Build volume: 140 L x 140 W x 140 H mm. Layer resolution: 100-400 microns, adjustable. Positioning precision: 11 microns on x and Y and 2.5 microns on Z. Filament diameter: 1.75 mm. Nozzle diameter: 0.4 mm. Frame and body: plastic and alloy. Extruder quantity: one. Product dimension: 420 x 420 x 420 mm. Product weight: 13.5 kg. Software: FlashPrint. Printing via Wi-Fi, USB cable，USB stick and Cloud. Printing material: PLA

• Slide-in build plate allows printed objects to be easily removed
• 3.5-Inch full color touchscreen with intuitive icons makes for easy operation
• Sturdy, plastic alloy construction ensures stable prints
• Safe, non-heated build plate
• Wi-Fi, usb and flash drive connectivity.Positioning Precision: 0.0001 inch on Z axis, 0.0004 inch on XY plane Resolution: 0.004 inch

User questions & answers

Question:	How large a piece can you make with this printer? Can you make cookie cutters
Answer:	It has to fit in a six-inch square space. You could make cookie cutters. There's some debate, however, about using PLA printed items with food. I would read up on that.
Question:	Can this printer do laser engraving like bibo 3d printer
Answer:	No this can not laser engrave. I bought the Bibo 3d printer because it sounded like it was amazing. It sits on my shelf collecting dust. The FInder 3D printer I use all the time. I have one at home and one at school that my students just love too. The finder is all put together and ready to go with a few adjustments. The Bibo you will have to put together. I would not recommended the Bibo for beginners.
Question:	Will hatchback filament fit this printer
Answer:	No, the spool does not fit the Finder's cartridge but you can still use Hatchbox filament by feeding from outside.
Question:	Does this printer come with PLA or do you have to buy it separately
Answer:	The package comes with a roll of PLA filament. Thanks.

Product features

Slide-in build plate. Easier 3D prints removal

Slide-in build plate allows you to draw it out of the printer and then remove the finished 3D prints more easily. At same time, it can minimize damages or offsets to the build plate.

Intelligent assisted leveling system. More precise and easier calibration

Finder features an intuitive calibration detection system to assist leveling. You are directed to tighten or loosen leveling screws until a beeper barely sounds, then it detects the distance between nozzle and build plate to verify whether your leveling is at the right position. Once the first location is leveled, you’re directed to next two screw locations accordingly with same operation. In this whole process, you’re well instructed with clear messages on the touchscreen display. And all of these make calibration much easier and more precise than before.

Quiet during operation

Finder is equiped with super quiet printing desiging, the sound of operation is low to 50 decibels, provides a quiet printing experience for colleague and family!

2nd Generation Wireless connection. More stable.

Finder features the 2nd generation Wi-Fi connection with more stable wireless file transmission. And now you can send 3D files from your computer to Finder 8GB memory with your own Wi-Fi network under AP or STA modes.

Colorful Cloud experiences

Finder supports 3D Cloud function. 3D Cloud not only allow you to store, edit, share and printing status checking online, but also provides you a massive model database.

Product description

At MakerBot, we believe there is an innovator in everyone.



The MakerBot Replicator+ 3D Printer is our most popular 3D printer for professionals, educators, and hobbyists with a fast and reliable 3D printing experience, right out of the box. Enhanced 3D printing workflow features including the Smart Extruder+, a full-color LCD display, Wi-Fi connectivity, and MakerBot Print 3D printing software are just a part of what makes the MakerBot Replicator+ 3D printer the preferred 3D printer for both beginners and advanced users alike.



The MakerBot Replicator+ 3D printer produces high-quality prints 30% faster than its predecessor and offers a 25% larger build volume. Improved hardware, like a redesigned gantry and Z-stage offer greater reliability and precision—every time. The included Smart Extruder+ has double the warranty of its predecessor and delivers a dependable, consistent 3D printing performance with superior results using MakerBot PLA filament—no matter the project at hand.



MakerBot. Ideas in the Making.

• Your purchase includes One MarkerBot Replicator, One 3D Printer with swappable Smart Extruder+ in Black, 1 PLA spool, 1 flexible build plate, power and USB cables
• Item's dimensions – 17.4" W x 20.8" L x 16.2"H | Build volume – 7.6” W x 11.6” L x 6.5” H / 573 Cubic inches | Power requirements – 100-240 V, 50-60 HZ | Material diameter – 0.069” | Camera Resolution – 640 x 480 | Operating Temperature – 60-90°F]
• Works with MakerBot PLA Material - Large Spool, Small Spool & MakerBot Tough Material - Large Spool, Additional materials such as bronzefill, copperfill, and woodfill
• The only 3D printer tested by NIOSH for environmental safety in the classroom or office space.Aluminum Casting and Extrusions for Motion Components
• Winner of PC Mag Editor’s Choice Award, iF Design Award, Techcrunch best Classroom 3D printer

User questions & answers

Question:	How well does this printer work with what I would call 'overhangs', meaning protrusions or horizontal elements that are non supported
Answer:	My classroom's Makerbot can do short overhangs ok, but anything more than half an inch sags a lot, to the point that there is little to no layer adhesion. It does support material pretty well, though.
Question:	can this printer print abs
Answer:	No, ABS requires a hot build plate.
Question:	What are maximum dimensions of printed objects
Answer:	Taken directly from the manufacturer's website Build Volume29.5 L X 19.5 W X 16.5 H CM11.6 X 7.6 X 6.5 IN9,492 Cubic Centimeters563 Cubic Inches
Question:	Does this printer have an enclosed cover? similar printers like flashforge, bibo, qidi all have the cover to get better abs printing quality
Answer:	No it does not. Also, this printer is not supposed to print ABS. It does not seem to have a heated bed and I cannot tell if it has cooling fans. In other words if it even *can* print ABS, it is highly likely that every part you printed would be horribly warped.

Product features

MakerBot Replicator+ 3D Printer

The MakerBot Replicator+ is engineered and tested for reliable, faster printing. The Replicator+ prints high-quality concept models faster, easier, and with a bigger build volume. Combined with MakerBot’s powerful workflow tools, the MakerBot Replicator+ streamlines desktop 3D printing for professionals and educators.

To ensure improved performance, the Replicator+ features a sturdier construction, a 25% bigger build volume, better print adhesion, and more. The Smart Extruder+ and all ease-of-use features from the previous model come standard. The Replicator+ is also compatible with MakerBot’s Slate Gray Tough PLA Filament Bundle, created for engineers and designers.

MAKERBOT CLOUD INTEGRATED

Print and monitor your project - from your browser straight to your MakerBot 3D Printer. Add the Print from CAD integration for your favorite CAD program and start a print in just two clicks.

21st CENTURY AUTOMATION

A suite of smart technology allows you to spend your time focusing on the part design, not the printing process. From WIFI connectivity, an onboard streaming camera, smart sensors in the extruder, and an automated Z-homing build plate, this is how 3D printing is supposed to be.

EASY TO CHANGE CONSUMABLES WITH ENVIRONMENTAL SAFETY

Our 3D printers and materials have been tested by the CDC NIOSH (National Institute for Occupational Safety and Health) so you can breathe a little easier in your classroom or office. With the easy to replace Smart Extruder+ and Flex Build Plate maintenance is quick and easy. A front facing filament drawer lets you change out colors or material types without flipping your printer around.

MakerBot Print

MakerBot Print is free software that optimizes and streamlines the 3D printing process for any workflow. It allows you to discover, prepare, manage, and share 3D prints.

Native CAD Support

Save time by importing native CAD files, like parts and assemblies. Reduce the number of files to manage, and eliminate the need to convert files to an STL format which prevents conversion errors.

Optimized Printing

Our new slicer algorithm automatically adjusts slice settings for your specific printer model, software version, and Smart Extruder type. The new print preview helps verify design details before printing, and includes rafts and supports break away more easily for a cleaner print surface.

MakerBot Tough PLA

Made with designers and engineers in mind, the MakerBot Slate Gray Tough PLA Filament Bundle allows you to create durable, high-impact strength prototypes and fixtures.

Product description

Leaving our competition a step or two behind, these new features are only available on the new FlashForge Creator Pro:

The new front door comes pre-installed, and has been re-designed to provide easier access to prints.

The new injected PC top cover comes in one solid piece, making it stronger and more effective at regulating temperature.

The new, larger platform adjusting screws have been re-engineered for easier use.

The new extruder wiring router can protect wiring from wear and tear efficiently



What’s in the box?



The Creator Pro

Dual Extruder

2x spool holders

2 spools filament(N.W.:1 kilogram per spool, material and color are randomly selected)

2x spare blue platform stickers

2x filament guide tubes

2 M3×8 screws, 3 wrenches in different sizes, 1 spare leveling knob, 2 spare Teflon tubes, 1 unclogging pin and grease in tool bag

Extruder’s accessory kit Containing turbo fan duct, 2 M3×8 screws, M3×6 screw

Power cord

USB cable

Injected PC top cover

1 x 16GB SD card (contains software ReplicatorG and FlashPrint, test sample files and operation manual)



Compatible Software: ReplicatorG, FlashPrint and Simplify3D(Please kindly noted that Simplify3D is a third party paid software, which is not included in this package.

If user want to use, please buy it by yourself)

Compatible OS: Windows, Mac OSX and Linux

Print from SD card or over USB cable

Input file type: STL, gcode, x3g Printing Build envelope: 225 x 145 x 150 mm

Build volume: About 5 liters

Layer thickness: 0.1-0.3 mm(adjustable)

Nozzle diameter: 0.4 mm

Materials : Works well with 1.75 mm ABS and PLA.



Support Contact Information

If you encounter any issues with your FlashForge purchase or have any questions, please contact the support.

• Full manufacturer's warranty fulfilled by Flashforge, and free email support provided by expert FlashForge technicians
• A sturdy metal frame that is substantially more stable than the Creator's original wood frame.Build volume 8.9 X 5.8 X 5.9 inches
• Aviation level aluminum plate with a thickness of 6.3mm guarantee its surface is completely flat and will not warp during heating process
• Metal platform support plus 10mm guide rod ensure a precise Z axis movement and prevent platform arm from deforming. Filament Compatibility- PLA, ABS, PLA Color Change, Pearl, ABS Pro, Elastic, PVA, HIPS, PETG, TPE, TPU, Conductive Filament, Flexible Filament, Metal Filled Filament, Wood Filled Filament, and PP
• Enclosed chamber insulates and protects ABS prints.Filament Diameter:1.75 mm [0.069 in]
• Please refer the user manual below for better use

User questions & answers

Question:	How fast will this print
Answer:	I'm making some 5"x5"x1/4" ABS plates. They take 90 to 120 min to print.
Question:	Does this printer have a glass bed such as bibo 3d printer's removable glass bed sold in amazon
Answer:	FlashForge does not sell glass bed but you can find it on Amazon.com sold by third party such as this one:https://www.amazon.com/Borosilicate-Glass-Upgrade-Flashforge-Creator/dp/B00XWLVKRG/ref=sr_1_7?ie=UTF8&qid=1482575678&sr=8-7&keywords=flashforge+creator+pro
Question:	I want to print chocolate moulds. Wish list: Food grade material; 7" X 10 " X 1-2 mm thick OR Polycarbonate moulds which are ussually more like 4X
Answer:	7"x10" is no go unless you print in 2 parts and glue together.4"x7" is possible in one go on this machine but your molds will give you chocolate that shows all the layers of plastic.Also polycarbonate prints will likely leech PBA into the chocolate like crazy.I recommend vacuum forming for food molds.Look up leaftechllc dot com. That guy can make vacuum molds for you for hobby prices.
Question:	Can anyone reccomment a 3D scanner? What are the things to look for in a 3D scanner? I'm looking to scan items maybe about 6" or more in size
Answer:	3D Systems sells a tethered hand scanner for about $400. It works well, if you have a systems requirement appropriate PC and don't rotate the scanner clockwise/counterwise while scanning - will lose lock on the object if you do so. Will also lose lock if you move in closer than 15 inches to the object. The slower you scan, the better the resolution, right up to fabric texture. They also make a version for an iPad.

Product features

FlashForge 3D Printer Creator Pro

Sturdy metal frame is substantially more stable than the Creator’s original wood frame.Warp-resistant 6.3mm aluminum build platform remains perfectly level under the stress of high heat.New high heat resistant metal platform supports replace plastic supports.New heavy-duty (10mm) z-axis guide rod ensures steady and precise movement. New acrylic cover encloses the chamber to insulate and protect ABS prints.New LED light illuminates the printing area.New integrated LCD screen and button board functions error-free. SD slot is repositioned for more convenient access.

• Great starter 3D Printer, Super easy to setup since it comes almost entirely preassembled, come with all the proper tools to get started, and just a single grub screw to level instead of having to level each corner. Great introduction to 3D printing
• With the Dual Rails, No worry about Z wobble issue; The dual Z axis rail make the bed very stable, this helps with the movement and to make sure the bed does not shift in the middle of printing; Better choice for large x-y objects with super-fine details
• Upgraded LED Array, With the UV upgraded lighting, it makes the resolution and the accuracy in your printing that much better and tighter than any other 3d printer in its class. The pitting in the skin, the hair and the texture in the clothing all can shows up
• More Function, 1 Touch screen, offer a new-Level use experience 2 Sanded Aluminum platform, greatly enhance adhesion make it more stable during printing 3 Double air filtration system, effectively reduce the divergence of odor 4 CE Certified Power Supply
• Photon Owner's Group, On Facebook as the people there are very knowledgeable and love to help with issues; They are eager to give suggestions and advice for everyone to get the best of their Photon and photon S

User questions & answers

Question:	Can the resin shipped with the system be used to print functional parts ( such as electronic enclosures) that will be in direct sunlight post curing
Answer:	It could, but the Resin it comes with is pretty brittle
Question:	Has anyone had problems with the usb drive? i have tried 6 different drive. i just opened a ticket with them
Answer:	I just received my machine and it was version 2.9.9, the current version is 5.0.2 and updated them to UI 2.6. I used a Sandisk Extreme USB 3.0 64GB to update it went smoothly and was pretty fast. I did reformat the drive fro FAT 32 with Disk Utility on the Mac.
Question:	Given the max work dimension are: 4.53"(L) x 2.56"(W) x 6.49"(H), can a single tray of the resin build a solid block of this max size
Answer:	No. A solid block filling the work area would take almost 1.25 liters of resin. The suggested max amount of resin in the vat is approx 75-100 ml So you would have to add resin 12 times or so in order to build that solid block :-)
Question:	The power supply that came with the printer seems to not be working correctly. What kind of power supply should I purchase to replace it
Answer:	The operating voltage is 110V / 220V.Your power adaptor is not work?You can try it with your computer's adapter first. It is universal.Please contact us,we will give you a replace.

Product features

ANYCUBIC Photon S - easy to set up

1. Build the print platform together
2. Set the printing platform (Leveling)
3. Build the resin container together

• And now you can enjoy the world of 3D printing

Upgraded UV Module

Adopt matrix UV lighting and 2560*1440 high resolution screen, which will contribute to uniform distribution of energy and enhancement of prototype precision.

Z-axis Dual Linear Rail Design

Maximally improve the stability of Z axis, and ensure its smooth surface and detailed reconstruction. Start with the details for a more enjoyful print experience.

Air filtration system

This 3d printer equipped with dual fans for excellent ventilation, and applies activated carbon air filtration, thus able to effectively reduce the divergence of odor.

Creative structure offers more easiness to leveling

• Lower the platform down to the screen,
• Feel the resistance when pulling the paper in-between,
• Tighten one screw
• Leveling doneLower the platform down to the screen,

Refined details and high degree of accuracy for excellent visual quality

• ★★★★★【Friendly Reminder: There is one spool of red color PLA, one spool of white color ABS filament, please check the filament before printing and use the correct settings to print.】QIDI TECH 3D printer, equipped with the latest dual extrusion technology, occupied the overall leading position in education, engineering, design and home/hobby printing.
• X-Pro 3D Printer Kit features conditional breakpoint printing and upgraded 4.3 inch touch screen, Smarter and easier operation.Mute printing.
• Durable and high temperature resistance 6mm aviation grade aluminum build platform, can be heated up to 120℃. Removable curved metal plate make it more convenient to remove the model after printing, which is widely appreciated by users.
• The QIDI TECH 3D Printer with metal platform support rod, which upgraded to 12mm, and also including upgraded parts like motor, main board, and mechanical structure, ensuring more stable printing.
• Backed by with One-to-one QIDI TECH service. If you have queries about 3D Printer, feel free to contact our exclusive and fast support service team, we'll reply back to you within 24hours. Free one-year warranty is also guaranteed.

User questions & answers

Question:	Does this printer support Dissolvable Filament used for support
Answer:	The software provided gives an option to load PVA which is a dissolvable filament. While I haven't tried it, many reviews also indicate that the reason for the dual extruder is to allow for dissolvable filaments when printing supports for complex structures.
Question:	Can i use octopi or astroprint? people on fb say no b/c usb port is only for flash drives not for pcs or other devices. xpro owners, please verify
Answer:	While the newer model of this printer does not have a USB port capable of serial communication, you can attach a Raspberry Pi to the motherboard's UART header and then use Octopi to send gcode wirelessly to the printer. You will need a UART to USB serial adapter. I also used a usb step down voltage converter (24 volt to 5 volt) to power the Pi directly from the printer's power supply. There is one set of available 24 volt outputs on the power supply. I then mounted the Pi next to the motherboard with velcro strips and put everything back together. Works great.
Question:	Can Qidi X pro pause the printing automatically when filament runs out? I saw some printers have the filament run out detection function
Answer:	No. There is no filament run out detection.
Question:	Does this new product support ditto printing, override gcode temp, and changes to the temperature and speed during printing
Answer:	BIBO 3d printer supports the ditto printing. They called copy printing.

Product features

Dual Extruder Assembly:

Added four side air blow turbo fan, ensure better print quality.

Print precision: 0.05 -0.4mm

Print speed: 60mm-150mm

Nozzle max temperature: 250℃

It is capable of printing PLA, ABS, TPU, PETG and two colors printing.

Removable Plate:

Movable extraction, curved metal plate, can be used repeatedly, it is more convenient to remove the model after printing. And meanwhile, can minimize the damages or offsets to the build plate. Which is widely appreciated by users.

Heating bed:

6mm aviation grade aluminum plate

Can be heated up to 110℃

12mm enhanced guide rod

Power Breaking Point Function:

A break point can be saved and the printing can be continued later. If power outage is occurred during the printing process, the printer will automatically save the break point. Intelligent!

Slicing Software:

QIDI Print slicing software, unique auto slice function based on your time and quality preferences. Easy to use.

It can also compatible with simplify 3D software perfectly.

4.3 Inch Touch Screen:

4.3- inch touch screen with large and use friendly interface. During whole process, providing you real-time printing status, make it more intuitive, and more precise and easier to operate.

QIDI One-to-one Service:

If any problems with the X-pro 3d printer, please contact Qidi Tech team and we will reply in 12 hours.