13 best 3d printer commercial

• The X-Max with pioneered creation of two different ways for placing the filament. Ventilative printing or enclosed constant temperature printing for you to choose when printing the different types of filament.
• 5-inch full color touchscreen with intuitive icons makes for easy operation
• Build size: 300mm x 250mm x 300mm / 11.8" x 9.8" x 11.8"
• Full metal support more stable than plastic support;Aviation aluminum, CNC machining aluminum alloy
• QIDI TECH Professional Amazon after-service team,if you have any problem about our 3d printer,we will reply to you within 24 hours.Free one-year warranty.

User questions & answers

Question:	Does it stop if the filament runs out and wait for user to load new filament
Answer:	The printer currently does not have such function. So if the filament runs out, there will be no prompts or stop printing. Please load new filament directly to print.
Question:	Can a Filament Detector be added by user to the Xmax
Answer:	Because the machine has automemory...on power outages, I built my own filament detector. It serves two purposes: 1) It will detect the end of a filament at the sensor (basically a mechanical switch), and trip a relay which shuts down the machine; and 2) It cuts the filament in the case of a reel bind which then does (1) above. (this is done by a bend that pulls into a blade when the force is enough). Yes, it's a kludge. But when you are 10, 15, 22+ hours into a print (often overnight) and are not baby sitting it, this method has been a plastic and time saver. I am sure there are better ways, but this was a quick and dirty project after I had a spool bind up. While I normally use higher quality manufacturers, binding can and does occur, especially if the last person to swap out a roll wasn't careful and let the end loop under a wind. Those of you who have printed enough, know exactly what I am talking about.
Question:	Does this printer have filters for fumes
Answer:	There is a foam filter element over the cabinet fans. This does little more than filter the air blown into the build chamber, and is really unnecessary, for all intents and purposes. Consider it a dust filter for the inside of the printer. It has no impact on any fumes or particulates in the air escaping the printer during use..
Question:	Can it automaticlly stop if the filament runs out like bibo 3d printer
Answer:	No, it cannot. However, there is a pause and resume function, so you can replace/change filament mid-print, you just have to detect the correct time (or predict it in gcode) when the filament will be close to running out.

Product features

Double Z-axis:

Updated the Single Z-axis to Double Z-axis, more stable and solid for large size prints.

Innovative design of double z-axis motor structure with 4 pieces Imported 12mm axis.

Maximum print size is 11.8''x9.8''x11.8''(300(L)x250(W)x300(H)mm)

Newly Developed Extruder:

Two Sets of Qidi Tech Third Generation Extruder Assembly with Different Capability.

A extruder : For printing general material such as PLA, ABS, TPU ( already installed on the printer).

B extruder : For printing advanced material such as Nylon, Carbo Fiber, PC.

Two Different Ways for Place the Filament:

The first creation of the two different ways for place the Filament.

A. Place the filament outside: The filament feed more smoothly while printing PLA, TPU, PETG. It compatible with any brands of 1.75mm filament.

B. Place the filament inside: For printing advanced material such as Nylon, Carbon Fiber, PC, which requires an enclosed constant temperature printing.

5.0 inch Touchscreen:

5.0 inch touchscreen. Larger and user friendly interface makes it more intuitive and easy to operate.

Removable Plate:

Movable extraction, curved metal plate, can be used repeatedly, it is more convenient to remove the model after printing.

The plate's front side can print normal filaments, such as PLA, ABS,TPU,PETG.

The plate's reverse side can print advanced material such as Nylon, Carbon Fiber, PC.

Qidi Print Slicer:

The Qidi Tech latest generation slicer software version 5.0 : Redesigned UI interface of Qidi Print software is more convenient to operate. It has been changed the software's slicing algorithm and improves the print quality by 30 percent and speed by 20 percent. The Qidi Print software compatible with all types of Qidi Tech 3d printers, life-time free, the alternative to paid software ( If you have the old version, please download the latest version on Qidi TechI official website).

QIDI TECH One-to-one Service:

If any problems with the X-Max 3d printer, please contact Qidi Tech team and we will reply in 12 hours.

Product description

Specifications :



Printing size:350*250*300mm (13.78x9.8x11.8in )

Layer resolution:0.05-0.3mm

Offline printing:SD card

LCD screen:Yes

Nozzle diameter:0.4mm

Hot bed material:Aluminum substrate

Printing filament:PLA,ABS,TPU.PA,WOOD

Filament diameter:1.75mm

Software Language:Multi-Langauge

Working format:STL,G-Code

Device dimension:590*450*568mm

Device weight:35KG(70.6lb)

Packing demension:720*550*800mm

(28.35*21.65*31.50in)

Packing weight:50KG(110lb)

Voltage:AC110~230V

Operating system:Windows,Lunis,Mac

Control software:Cura,Repetier-Host





Package Contains:



● Machine A-8

● 1roll x 1KG filament

● 1roll x Blue masking tape

● 1x Spool Holders

● Nuts, screws and Hex Wrench Kit and testing filament

● Power Supply Cable

● USB cable

● 1×8GB SD card and Reader

(contains software, test sample files and operation manual)

• Reliable Material : Commercial grade 3d printer industrial linear guildway precise ball screw rods.metal structure with cover
• Large building size :13.78x9.8x11.8in ,lots of printing material ABS PLA TPU WOOD filament 1.75mm
• Clean and neat structure :Fully closed metal structure with creative and friendly metal extruder cover ,precise CNC components
• Easy Filament Feeding :Dual feeding motor,filament feeding auto and easily
• HBG glass heating bed tigh adhesion easy to take off when cooling down

User questions & answers

Question:	Hi, how are you? what cost does the material have to make the products? another query, if i wanted to make door keys, are they sturdy? thank you
Answer:	Hello Alan, it cost only USD20-30 for 1kg filament. and you can print almost 1kg model which depends on your models. but it only works with plastic filament but not metal. so, you can make a plastic door keys model but not metal key. thanks !
Question:	Is this printer supported by Simplify3D
Answer:	yes,it works with simplify3d
Question:	If i export a autocad 2016 file as .stl into your host program (cura, repetier-host), will that work to print 3-d
Answer:	Yes,it works ! 1st,drawing 3d by CAD and save it as STL format.2nd, loading this STL file to (Cura . repetier-host) .that is all. there is user manual in my listing for your reference
Question:	Does this come with any filament at all? Small test spool
Answer:	yes, it will come with 1KG PLA and 1 roll of masking tape

Product features

JGAURORA 3D Printer A8

Fully Closed Metal Structure

Indsutrial linear guideway

Industrial linear guideway to create high accuracy positioning and extreme smooth printing effect.

Ball screw rod

Ball screw rod to create high accuracy positioning and long service life

Dual feeding motor system

Dual filament feeding motor system to ensure stable and evenly feeding, and long time printing.

Patented Bullet type nozzle

Patented bullet type nozzle was developed by JGAURORA R&D team as per years experience.it is heating uniformity, no clog

Details design makes high accuracy and safety

Precise CNC components, creative metal extruder cover to avoid scald.

Two fans in the machine frame keeps constant temp.

Changing color PLA

Print size :190*55*270mm

Layer thickness: 0.1mm

Print speed :50mm/s

High standard of quality control

Quality management system certificate ISO9001:2015 , Certificate No.: 00117Q35307R0M/4403 Iusse date : July 4 2017 .Strict requirements and high standards is our mission.

• Dual feeding system ensures smooth feeding,Fully closed metal structure and easy-open lid makes printing more visible and stable
• Filament RUN-OUT detection: The machine beeps when your filament runs out to allow you to change the filament and avoid a failed print
• Power Fuilaur Detection: Resume printing from where the last print was stopped due to power failure. Saving you valuable time and filament
• Ball screw rod and industrial linear guideway to create high accuracy positioning and extreme smooth printing effect.
• Color touch screen gives an easier experience navigating the printer's menus. The machine will be shipped from China

User questions & answers

Question:	What is the nozzle material
Answer:	It is copper.it depends on how much temperature your filament request. our machine nozzle temp.up to 285'C
Question:	Will this printer work with a Mac computer
Answer:	yes,it works
Question:	Does it accept any brand spools of abs, pla. does it do nylon
Answer:	yes,it acceptsany brands

Product features

JG MAKER Large Build Volume 3d Printer fully closed metal structure 350x250x300mm

1> Fully closed metal integral fixed frame to keep constant temperature during printing.

2> Dual filament feeding motor system to ensure stable and evenly feeding, and long time printing.

3> Ball screw rod and industrial linear guideway to create high accuracy positioning and extreme smooth printing effect.

4> HBG glass heating platform which makes it easy to take away model after cooling down.

5> Precise CNC components, creative metal extruder cover to avoid scald.

6> Self- developed high configuration main board with Malin firmware and effective heatsink.

7> RESUME PRINTING: printer has filament sensor and power failure detection, when the filament used up or there is a sudden power failure, it can resume printing.

8> Power Fuilaur Detection: Resume printing from where the last print was stopped due to power failure. Saving you valuable time and filament

9> Suitable for large size and complicated printing samples.

Industrial grade Large 3d Printer

Industrial grade linear guideway ,Smooth movement, low vibration,ensure higher accuracy industrial grape 3d printer

High accuracy ball screw rod ，Effectively ensure the stability of the platform movement

Dual filament feeding motor system to ensure stable and evenly feeding, and long time printing.

HD Large color touch screen

HD color touch screen ,Let's enjoy much convenient and easy operation

Optical switch

Optical switch makes High positioning accuracy and stable printing.

Resume printing and filament Run-out detection

A8S 3d printer has filament sensor and power failure detection, when the filament used up or there is a sudden power failure, it can resume printing.

You will receive

-1 X JG MAKER A8S

-1 X 1KG PLA

-1 X masking tape

-1 X toll box(including screws, user manual in PDF ,software .U Disk)

Specifications

• Layer thickness : 0.05-0.3mm
• Filament Diameter：1.75mm
• Build volume：350*250*300mm
• Accuracy：0.1mm
• Print speed：10-150mm/s
• Nozzle diameter：0.4mm
• Nozzle temp.：180~250’C
• Hotbed temp.：room temp.~110’C
• Machine size: 620*450*600mm
• Packing weight:40kg
• Power:450W
• Leveling: manual
• Operate：Color touch screen
• Screen language：English/Chinese
• Filament：PLA/ABS/TPU/WOOD etc.

Product description

Custom Design Welcome. If you need different heating solution and management, just tell us your requirements/applications and let our flexible thermal pros design for you. Why Keenovo Heaters? As one of the first manufacturers of flexible heaters( Silicone Heaters & Kapton Heaters) in China, we understand that the reliability of our heating elements for your devices,equipment or machines can NEVER be OVER-emphasized, and we offer best quality at reasonable prices with the following promises: a) We use ONLY Arlon silicone rubber substrate imported from the United States and authentic DuPont kapton film in production to provide the best heater performance and the longest serving life, especially at high temperatures or in long time heating process. b) We offer FREE assistance in heater design to achieve an ideal thermal heating solution for your application. A general idea of what you want is enough to turn our flexible heater design experts on working for you. c) Each and every heater is newly made to order and factory-inspected before delivery to you. KEENOVO is your right choice if you are looking for high quality heaters with 100% guarantee.

• Excellent heat source for your Huge 3D printer heated bed
• 3M PSA for easy mounting
• Can be Versatile and serve your other heating applications
• 1200W,120V;400X400mm Custom Heater Design Welcome
• Item Location: Shanghai, China

User questions & answers

Question:	I have mosfet upgrade on my s4 . Would this 24v 30amp be all I need for this instead of ssr
Answer:	Yes, you can print tpu.
Question:	Does this have preset wholes for the creality cr 10 s4 model
Answer:	We can't say so absolutely,but most is compatible.
Question:	Does this pad come with a preinstalled thermistor
Answer:	It's slide in. If you need drop in, we can also provide corresponding hammer head nut or roll in spring nut.
Question:	What is the highest temperature thay this heatbed can reach
Answer:	4040 is European standard, similar to 1515 in the US. I use 4040 connections on my 1515 from 8020.

• The X-PLUS with pioneered creation of two different ways for placing the filament. Ventilative printing or enclosed constant temperature printing for you to choose when printing the different types of filament.
• The X-PLUS 3D Printer Kit comes with two different types of extruder assembly. The extruder A had already been installed on the printer. The max printing temperature is 250C, and it can works well with PLA, ABS, TPU. And for extruder B, free to you if you need. The maximum printing temperature is 300C, and can print Nylon, Carbon Fiber, PC. (The latest development, free trial).
• Double Z-axis driver, ensures more stable and more precise printing quality when you print large model size. Higher configuration 3D printer.
• Latest slicer software version 5.0: Redesigned UI interface of QIDI software is smarter and more convenient to operate. It has changed the software's slicing algorithm and improves the print quality by 30 percent and speed by 20 percent. The QIDI software is compatible with all types of QIDI printer, life-time free, an alternative to paid software.(If yours is the old version, please download the latest version on QIDI official website).
• Backed by with One-to-one QIDI TECH service. If you have queries about 3D Printer, feel free to contact our exclusive and fast support service team, we'll reply back to you within 24 hours. Free One-year warranty is also guaranteed.

User questions & answers

Question:	Is the qidi 3d yellow banner removable? i understand branding, but it's a bit of an eyesore
Answer:	You can take it off but it will leave the glue on and it is a long process to remove.
Question:	Is the only difference between x-plus and max the bed size? i noticed the max doesn't list carbon printing - is that feature not available there
Answer:	The main differences between the X-Max and X-Plus are the build volumes (Max= 300x250x300mm vs Plus= 270x200x200mm) and the touch screen (Max=5" vs Plus= 4.3"). They both can print the same materials, including Carbon Fiber, Polycarbonate, PC/ABS, & Nylon using the Hi-Temp print head that has a hardened steel nozzle to prevent wear when using abrasive filaments. Hope that helps.
Question:	Is this a dual extruder printer like bibo 3d printer
Answer:	No, it is a single extruder. The additional extruder they include or send at customer request is an upgraded single extruder module.
Question:	How does this printer compare with the prusa i3 mk3? they are at the same price point but i would have to wait several weeks for the prusa
Answer:	The guy that sits next to me at work got the same Prusa kit. He feels like the QIDI X-Plus may out perform his. Also, my build capacity is a bit larger than his. He likes the PEI surface on the Prusa. My only mild complaint is having to exchange extruders for the over 250C range, but I think I get smoother prints with my low temp extruder that he does with the general purpose extruder on the Prusa. Also, he regrets not having an enclosure like mine has. We compare prints all day long, so after he spent an entire day and night building his & I was up and running in 10 minutes, I want to buy another one! I also got mine in 2 days & I have almost immediate answers from support 24/7, no matter how trivial. They are amazing! It took a couple of weeks to get the Prusa. He was so jealous!

Product features

Double Z-axis:

Updated the Single Z-axis to Double Z-axis, more stable and solid for large size prints.

Innovative design of double z-axis motor structure with 4 pieces imported 10MM axis.

Maximum print size is 10.6''x7.9''x7.9''(270(L) X 200(W) X 200(H)mm)

Newly Developed Extruder:

Two Sets of QIDI Third Generation Extruder Assembly with Different Capability

Extruder A : For printing general material such as PLA, ABS, TPU (Already installed on the printer).

Extruder B : For printing advanced material such as Nylon, Carbo Fiber, PC

Two Different Ways for Placing the Filament:

The pioneered creation of the two different ways for placing the Filament.

A. Place the filament outside: The filament feed more smoothly while printing PLA, TPU, PETG. It is compatible with any brands of 1.75mm filament.

B. Place the filament inside: For printing advanced material such as Nylon, Carbon Fiber, PC, which requires an enclosed constant temperature printing.

4.3 inch Touchscreen:

4.3- inch touch screen with large and use friendly interface. During whole process, you're well instructed on the touchscreen display, make it more intuitive, and more precise and easier to operate.

Removable Plate:

Movable extraction, curved metal plate, can be used repeatedly, it is more convenient to remove the model after printing. And meanwhile, can minimize the damages or offsets to the build plate.

The plate's front side can print normal filaments, such as PLA, ABS,TPU,PETG.

The plate's reverse side can print advanced material such as Nylon, Carbon Fiber, PC.

QIDI Print Slicer:

Latest slicer software version 5.0: Redesigned UI interface of QIDI software is smarter and more convenient to operate. It has changed the software's slicing algorithm and improves the print quality by 30 percent and speed by 20 percent. The QIDI software is compatible with all types of QIDI printer, life-time free, an alternative to paid software.(If yours is the old version, please download the latest version on QIDI official website).

QIDI TECH One-to-one Service:

If any problems with the X-Plus 3d printer, please contact Qidi Tech team and we will reply in 12 hours.

Product description

Specification Open Source Filament - PLA, ABS, ASA, PETG, PA, etc. (Flexible Materials not supported) Material Sindoh Filament - PLA, ABS Open Source Filament - Semi Auto Loading / Unloading Sindoh Filament - Auto Loading / Unloading Print Maximum Build Size - 210 x 200 x 195 mm Layer Thickness - 0. 05 ~ 0. 40 mm *Print Head - Single Nozzle Nozzle Diameter - 0. 40 mm Filament Diameter - 1. 75 mm Print Bed Material - Flexible Metal Bed Bed Leveling - Semi Auto Slicing SW - 3DWOX Desktop [Support File Types Stl, Ply, Obj, G-code (RepRap), Amf] Connectivity Options - USB 2. 0 Device / 2. 0 Host, Ethernet (1G), Wi-Fi 5-inch Full Color Touch Screen LED Lamp Internally Installed Web Monitoring PC, Smartphone, Tablet Filter - HEPA Filter Noise Level PLA - 45dB(A), ABS: 40dB(A)*Printer Size (W x D x H) - 421 x 433 x 439 mm Certifications Specifications Met - CE, UL (Only applies to the users who purchase 3DWOX through an authorized seller on US) 1) Product - Up to 1 year from the product purchase date 2) Parts (Nozzle, Bed) - 90 days from the product purchase date For details, please visit our official 3DWOX website. (Please Google "3DWOX" to find our website) Note: You must register your product on our website for . (Go to support & register your product) For more Information, Please follow our Twitter! Outside the US (Only applies to the users who purchased 3DWOX through an authorized seller on US) For those who purchased 3DWOX on US through international shipping and those who purchased 3DWOX on US and transported it to countries outside the US, we equally apply the excluding the shipping fee.

• ✅ ​Open Source Filament Mode is available letting users to have access to using 3rd party filaments.
• ✅ ​Easy to use and setup with patented features such as the Assisted Bed Leveling and Filament Auto-loading.
• ✅ ​Offers Flexible Metal Bed Plate for easy bed adhesion and user safety. No more adhesives to increase adhesion or scrapers to remove objects!
• ✅ ​Includes HEPA filter (Commonly used in air purifiers) to arrest very fine particles produced during print effectively.
• ✅ ​Reduced sound level of 40db which is equivalent to a library noise level. Print through the night without being disturbed by the sound of printing.
• ✅ ​Nozzle Diameter 0. 4mm Max Build size (WxDxH) 210 x 200 x 195mm (8. 2”x7. 9”x7. 7”)

User questions & answers

Question:	What types of files does it take
Answer:	.STL files.
Question:	The sindoh website said this supports opensourse filament, does that mean you can use other brands of filament
Answer:	Yes, that is true. It is also stated in our Amazon Product Page under "Want to use open source filament?". The 3DWOX 1 uses an upgraded filament flow driver motor from the DP200 and DP201 which allows different kinds of filaments to flow through the filament path.
Question:	When using 3rd party filament and it runs out, does it stop printing automatically and resume it when refill the filament
Answer:	Yes, there is a sensor in the filament path entrance which will notify you to switch to a new spool when it detects that the spool has run out of filament.
Question:	Will the Printer recognize the filament has been refilled with using the 3rd party filament without a new chip
Answer:	The chip is not required for using 3rd party filament so it would not provide information on how much the filament is left or if it has been refilled. If you are concerned about your print stopping due to lack of filament left in the printer, you should not worry about this as you can just switch over to your next filament spool without canceling your print job.

Product features

Want to use open source filament?

The 1 is open for all. You may select the Open Material mode and discover the further 3D printing possibilities or select Sindoh filament to ensure the consistency in print quality.

Why Scrape?

Just peel it. The flexible metal bed plate of 3DWOX 1 enhances both safety and bed adhesion. Think of what can be achieved with the flexibility and heating capability merged into one metal platform. It is a revolution.

What is a HEPA filter?

High Efficiency Particulate Air (HEPA) filter, commonly used in air purifiers, is designed to arrest very fine particles effectively. The 3DWOX 1 comes with HEPA filter that will absorb any dust created during Printing. Let 3DWOX 1 assist you create a healthy printing environment for your loved ones.

Fully Automated Loading

At Sindoh, we believe 3D printing should be easy. On many 3D printers today, the process of changing filament is a difficult procedure which involves cutting, retrieving and placing into small openings, all manually performed by the user. This makes the 3D printing a difficult experience, so with 3DWOX 1, we keep it simple. Just insert the cartridge and you're done.

Intelligent Bed Leveling Assistance

One of the keys to printing perfect prints every time is ensuring the print bed is perfectly leveled. You wouldn't want your house built on a slanted surface and the same is true for 3D printing. Bed leveling is important but with 3DWOX 1, we make it simple. The printer does the work and displays clear instructions to set the perfect level.

Self Nozzle Cleaning

Your Sindoh printer has at least one cleaning reservoir (3DWOX 1, 1X) or two (2X). These reservoirs clean off the nozzles of your printer, ensuring clean, dynamic prints.

Enjoy the Silence

Silence is the most pleasing sound of 3D printing. With its library noise level of 40 dB(A), you can now enjoy doing all kinds of things that require silence such as reading a book or taking a nap.

About Sindoh

Established in 1960, Sindoh has been solely dedicating itself to the printing industry as a first manufacturer to introduce a copy machine in Korea. With our long experience of R&D and manufacturing capabilities, Sindoh has transferred all existing applicable printing technologies to 3DWOX series.

Sindoh’s 3DWOX series redefines how 3D printing should be done. It simplifies the process of 3D printing and assists users with unique user-friendly features that we believe you had long been waiting for. You can be assured that our 3DWOX series will be your solid 3D printing partner and the CS will be at highest expectations.

Product description

Competitive and saleable the Pro2 3D printer improves upon it’s award winning predecessor and provides the next generation of performance

• Dual Extruder Electronic driven lifting 4× increased torque performance Diverse Filament Compatibility (300℃)
• Huge Build Volume (12*12*11 8 in) Minimum 0 01mm Layer Height
• Filament Sensor / Camera / HEPA Filter
• 7" Touch Screen Resume Print after Power Outage Wireless Compatibility
• 32 Bit Motion Control Board
• With 1-Year Limited
• Extended Available, please contact Raise3D at 888 963 9028

User questions & answers

Question:	What comes packaged with this printer? I don't see a package contents anywhere in the listing
Answer:	Hi, dear wanda001 , PCL is a low melting temperature refill, it's much safer for user, it's compatible with most 3D Pens/3D Printers on market, Not suitable for 3Doodler pen, thanks.
Question:	Does this have all metal hotends
Answer:	Hi yes, Please pay attention to the size of the hole of the printing pen with the appropriate diameter for 1.75mm PLA filament.
Question:	Is the single extruder version available
Answer:	Thank you for your inquiry. The material is PCL and suits hypothermia.
Question:	is ideamaker included
Answer:	No. MeDoozy PCL filaments DO NOT FIT for 3Doodler pen.

Product description

The Dremel Digilab 3D45 Idea Builder 3D printer is one of the best 3D printer options for printing advanced materials such as ECO ABS, Nylon, PETG and PLA. It is also Dremel's best 3D printer for university use. With an all-metal 0. 4 mm nozzle that heats up to 280°C and a removable glass build plate that heats up to 100°C, you can print almost any 1. 75mm 3D filament with ease. The printer is loaded with easy-to-use features and has a guided setup process that gets you from unboxing to printing in just a few minutes. The 5 inch full color touchscreen has an intuitive interface so you can quickly navigate through different functions. You can pause a print and change filament to print in multiple colors, too! The printer has an RFID reader built-in to detect the 1. 75mm Dremel filament that you place inside and automatically choose the best print settings for that filament. You can easily connect the printer to Wifi and use the included remote printing software to send prints from wherever you are, and you can also use the software to monitor your prints using the built in HD camera. The fully enclosed design helps reduce the chance for warping and keeps curious hands out of the printer, and it also makes the printer very quiet. It also helps the printer achieve a very high quality with 50 micron layer height. You can print using the included cloud software, the included Dremel Digilab 3D Slicer for Windows or Mac, or your favorite 3D software that supports . gcode, . g or . g3drem files such as Cura, Simplify3D, Craftware, KISSlicer, Slic3r or Repetier. Once you start slicing your own files you can take advantage of the large 6" x 10" x 6. 7" (402 cu in) build volume. The Dremel Slicer can be used to print multiple objects at a time, add supports, change layer height, change infill and even access advanced settings for the best prints. With 85 years of reliable quality, Dremel is an established brand that you can trust to support you throughout your journey. By purchasing a Dremel 3D printer, you will have lifetime access to unrivaled Dremel customer service as well as an industry-best 1 year . All the help you need will be just a quick email, live chat or phone call away. If you want to buy a 3D printer for architecture, college, college library, education, or for engineering, look no further.

• AWARD WINNING 3D PRINTER: 2018-2020 PCMag Editors' Choice Award. 2019 All3DP Best 3D Printer for Schools Award
• RELIABLE AND PRECISE PRINTING: 50 Micron layers (1/20th mm). Internally tested by Bosch (+800 hours) for safety and performance and 3rd party tested by UL
• WINDOWS, MACOS, CHROMEBOOK AND IPAD COMPATIBLE with cloud-based software included
• NETWORK FRIENDLY with Wi-Fi, Ethernet and USB connectivity. Also equipped with static IP and Proxy for quick and easy network set-up
• WORLD-CLASS LIFETIME DREMEL CUSTOMER SUPPORT located in Racine, WI.
• HEATED BUILD PLATE (10”X6”X6.7”) allows you to use PLA, PETG, ECO-ABS and Nylon filaments
• AUTOMATED 9-POINT LEVELING SYSTEM and built-in auto-levelling sensor detects and account for discrepancies for more successful printing
• BUILT-IN HD CAMERA allows monitoring prints from anywhere when using the Cloud software

User questions & answers

Question:	Does the glass plate need to be replaced after so many prints, should i buy build sheets? i did notice scratches on the plate on customers photos
Answer:	Technically no, this is 0.5 kg of resin and resin is mildly denser then water, so you get a little bit less then 0.5 liters. Plus resin shrinks when solidified so the end product will be less then 0.5 liter, but by a rather negligible Amount.
Question:	printer speed? mm/sec
Answer:	It would work on Moai but requires higher infill % in Cura setting and laser power of 52. As always, preheats resin/plate helps a lot. Check Peopoly wiki for printing guide on tough resins to learn how to print this resin as well.
Question:	Does this use propriety filaments or can i use other filaments? My 3d40 just died. I hate my davinci jr because i cant use 3rd party filaments
Answer:	It is hard to tell what level of resolution you are looking for. Some of our mini users print Blu straight and prime. Other prints a mix of Sculpt and Blu with extra resolution and dark grey color for higher resolute while still keep the print non-brittle thanks for the Blu part. A common mix is 70% sculpt 30% Blu.
Question:	Does it work with any filament of the correct material and dimensions, or does it only accept Dremel-brand filament
Answer:	A better question is, what are you looking to do because there is no perfect resin and you pick resin not just based on price but also on what they are designed for. Blu has good resolution, a bit of flexibility which makes it one of the toughest UV resins in the under $100 range. It prints very accurate and is ideal for mechanical parts, functional prints that need strength and accuracy. Sculpt is hi temperature resistant, high hardness resin for great resolution but it is more brittle than Blu. It is ideal for model makers who need a resin to show off their designs or making molds with it. It is also very easy to post process like sanding and cleaning and popular with digital sculptors (hence the name). As you can see, both resins are developed for different purposes. Yes, you could probably add flex100 to Blu already but if Blu is already strong, adding flex100 may weaken it.

Product features

The Award Winning Dremel DigiLab 3D45 3D Printer

This flagship printer is Dremel’s 3rd generation and is engineered for anyone from a first-time user to advanced professional to operate. Backed by Dremel’s lifetime support, the 3D45 is incredibly reliable and built for heavy usage. With easy-to-use features, a quick start guide, and everything you need in the box, you can go from unboxing to printing in minutes.

Reliable Printing starts with the Extruder

Designed for high quality and reliability, this is the engine that powers the 3D45 forward. The direct drive, all-metal extruder is clog resistant and delivers smooth 3D prints. This high-powered extruder heats up to 280°C for flexibility in different print materials. The Filament Run-out detection resumes printing where you left off when filament runs out. The Built-in automatic Leveling Sensor adds precision leveling for even more reliable printing.

RFID Tagging

autodetects filament type and adjusts nozzle and build plate temperature to optimized settings.

Fully Enclosed Housing

improves print quality while delivering a quiet operation environment.

Four Filament Types

allows you to print different filament types including PLA PETG ECO-ABS and Nylon.

• Patented nozzle structure – Has been upgraded several times and the wire is more even and smooth, which all improve the surface quality of model
• Heating Bed – Fast and stable heating, good molding effect, never deformed,high temperature resistance, abrasion resistance, fast installation super long service life
• Real time temperature monit – Automatically turn on the cooling fan,When the cavity temperature exceeds 50℃.Speed up the air ciculation inside the cavity
• Out of the box – Dreamer NX is suitable for industrial design,tool design,architecture designer,mechanical designer etc
• What you get – Flashforge 3d printer Dreamer NX,12 months warranty, lifetime technical assistance and 24 hours professional customer service

User questions & answers

Question:	Does this come fully assembled
Answer:	It comes 90% assembled, as during the transport the extruded assembly had to be protected. But it is a very easy process as it only requires 3-4 screws to assemble.
Question:	Does this printer meet qualifications of enablingthefuture for prosthetics
Answer:	I believe that it is possible as it allows the user to create anything beyond their imagination. It is a very high-quality printer so it should easily surpass any prosthetic qualification.
Question:	Can this use 1kg spools
Answer:	Yes,but the 1kg spools do not fit in dreamer nx,you can use a separate filament spool holder or buy 0.5kg spools.
Question:	What G-Code does this printer use
Answer:	The G-code is customized by flash forge so a normal G-code editor dose not work if it does not have the flash forge extensions

Product features

Constant Temperature Circulation System

Real-time temperature moni:Automatically turn on the cooling fan,When the cavity temperature exceeds 50℃.Speed up the air ciculation inside the cavity.

Heating Bed

Fast and stable heating, super long service life. Precision can be seen!

Level and flat surtace, Heat evenly, good molding effect, never deformed.

Flashforg's independent R&D printing,High temperature resistance, abrasion resistance, fast installation.

Patent Extruder

Inner turbo fan,form a circular air supply around the extruder,greatly improving the molding effect and also greatly lower risks of extruder jams.

The patented nozzle structure has been upgraded several times and the wire is more even and smooth, which all improve the surface quality of model.

Self-developed Slicing Software-Flashprint

FtashPrint offers beginners a basic mode and offers professionals an expert mode, which allows all users to enjoy the software with greater printing fLexibiLity.

File Edit Function: Convert 2D to 3D, cut Large-size model files, one-button control for seal / canister / lamp.

Compatbility of Various Filament

The 3d printer is suitable for various 3d printers filament,PLA,ABS,PETG, TPU,Copper,Wood.

New Added Password Lock

Private protection will be safe.

Multiple Printing Methods

Connectivity:Usb cable,SD card, Wifi.

High Precision

The 3d printer is suitable for industrial design,tool design,architecture designer,mechanical designer etc.

INSIDE PACKAGE

Specification parameters

Product description

Take your favorite fruits and vegetables and turn them into healthy, delicious snack with this Commercial Chef food Dehydrator. Set up and clean up is easy and then just let the product Do the rest. The 5, removable trays can be set up to accommodate both "tall" And "short" Fruits and vegetables simply by adjusting how you stack them a top one another. A drying guide is included for the novices to food Dehydration but the learning curve with be Quick and easy.

• DRYING CAPACITY - Equipped with 280W of drying power, this food dehydrator removes moisture and locks in the original flavors of your favorite foods
• 5 LAYERS OF TRAYS - Designed with 5 circular trays, which is enough to hold most food items and create uniform drying; 5 trays provide the ultimate convenience to classify different food and increase productivity
• ADJUSTABLE THERMOSTAT RANGE - Features adjustable temperature range. Drying temperature can be set from 104 degrees to 158 degrees Fahrenheit. Choose the optimal temperature depending on the ingredients
• EASY TO STORE & CLEAN - The trays are dishwasher safe, making it easy and convenient for you to clean and store; Suitable for drying fruit, vegetables, meat, herbs, mushrooms, or to make beef jerky, turkey jerky, fish jerky, and any other homemade food, also can be used to make chews and snacks for your pets
• HEALTHY SNACKS - Keep up with your New Year's resolution, make fast, easy and healthy snacks like banana chips, fruit roll-ups, beef jerky

User questions & answers

Question:	i got the westinghouse wfd100w for christmas 12-25-17 i just open box today on 1-5-18 and would like to know if i can dehydrate beef and make jerky
Answer:	Answering for other searchers: I use this for two purposes: making beef jerky and drying my 3d printer filament. The jerky is great and I love this seasoning and curing product: https://smile.amazon.com/gp/product/B009SJAX4M that tastes just like the jerky you buy in stores when I use it with bottom round beef.
Question:	One manual says to cook poultry and marinate beef. i'm making dog treats. do i need to do that before i dehydrate it
Answer:	Poultry must reach an internal temperature of 165F to kill any possible viruses. Beef is marinated for 2 reasons; impart flavor and act as a preservative.
Question:	Is this product dual Voltage? 120-240v
Answer:	no
Question:	I am new to drying fruits... How do you know which fruits take the same temp and time to dry
Answer:	By or borrow a book on dehydrators. I am just starting out so I only have experience with apples and bananas so far. Many fruits require that you spray them first with Lemon Juice and water. I have made Beef Jerky a couple of times with success. I just marinate it ("Baby Rays" and a touch of booze) . I just throw the strips on, crank it up to max and keep an eyeball on it.. If doing multiple trays, I switch bottom to top as the jerky stiffens so the bottom won;t get overcooked.

• Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs.
• Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
• Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable.
• Safety Protected Power Supply: Only needs 5 minutes for hot bed to reach 110℃.
• Strict Test: Strict testing for key components before delivery and life-time technical supports available.

User questions & answers

Question:	I am looking to purchase a 3D printer as a gift for a beginner. Does anyone have any recommendations? Thank you
Answer:	My son is 15 and he handpicked this one as a gift. He doesn’t know that I’ve purchased it, but he was very adamant that this was the best one. If the recipient is very technically inclined, I think it would be a great fit. I’ve read tons of reviews and watched several on YouTube. Once it’s properly assembled ( does seem to take some time), then operation is suitable for a beginner (again, must be very technically inclined). My son did request a different type of filament that I also purchased on Amazon, because the included roll isn’t that great. I don’t remember which one I purchased, but it was about 20.00. He also suggested getting or building a table to sit it on, as you should not sit it directly on the floor. He’s making one to put beside his desk, but I’m sure any small table would do. I’m very excited myself to see it in action, but I guess I’ll have to wait until Christmas.
Question:	Does the creality ender 3 has the dual extruders like the bibo 3d printer
Answer:	No, but. You could upgrade it if you have the expertise
Question:	Hi. Purchasing for my young granddaughter. will I need to purchase anything else with the unit in order to use it christmas day
Answer:	You also need the filament sold on spools. It comes in many colors. The filament is the actual product that is used to make the 3D creation.
Question:	Seriously how difficult is the build
Answer:	It is very straightforward, but the downloadable PDF instructions leave a lot to be desired. I highly recommend using the top-rated "how to build" video, along with the PDF. Here is a link to that video: https://www.youtube.com/watch?v=me8Qrwh907Q The video contains a huge number of hints which, having now completed my first 3D print, which was 100% successful, I can now fully appreciate. The video helps you get everything square, and makes sure that many minor adjustments which were not done perfectly at the factory, are tweaked just right.

Product features

Fully Open Source

Allow users to improve their printer upon the source code and share the changes within the community, resulting in an improved experience for all.

Branded power supply

Branded power supply and high-watt hot bed ensure fast heating to the printing platform.

Resume Printing Function

Ender 3 can resume printing after power outage or any other unexpected stoppage.

Upgraded Extruder Design

Greatly reduces the risk of clogged nozzle and bad extrusion.

High Precision Printing

Allow you to print high precision models, creat your own world.

Suitable gift for kids

This semi-assembled kit 3D printer is a perfect gift for kids, allow them to learn about the basic construction of 3D printers.

Ideal for STEM Projects

Invite imagination and innovation to student, help them discover the wonders of all the STEM fields.

Product description

MakerBot Replicator Z18 3D Printer

• Massive build volume
• Seamlessly integrated with the growing MakerBot 3D Ecosystem of hardware, software, materials, accessories, and solutions
• Powered by the user-friendly, app- and cloud-enabled MakerBot OS that’s regularly enhanced with software updates
• USB, Ethernet, or Wi-Fi connectivity creates a seamless production workflow
• Compatible with the new MakerBot Smart Extruder+.Layer Resolution:100 microns

User questions & answers

Question:	What is the tallest parts that can be built
Answer:	This item max operating temperature is 250C.
Question:	Can this printer print using the material known as "ninjaflex
Answer:	I wash in cold water and line dry, to keep it looking new. My daughter has had this shirt for 2 years and it still looks new.
Question:	can i print minimum 50CM sculpture
Answer:	I would suggest XL, it would give you some room. If you like snug go L. But XL would be my choice.
Question:	Can it print in multiple colors
Answer:	Get the 3x. 2x will fit to tight!

Product description

The new LulzBot TAZ Pro is an industrial desktop 3D printer that provides large, multi-material and soluble support printing with LulzBot’s award-winning reliability. Create large functional prototypes, manufacturing aids, and print-on-demand parts with professional results.

• Print multiple materials and soluble supports with dual, vertically actuated E3D hot ends (Max temp: 300°C).
• Enjoy the industry's widest selection of ready-to-print materials including high-strength and high-heat filaments that are too abrasive for other machines.
• Large 280 mm x 280 mm x 285 mm build volume.
• Manufactured in Colorado with premium components, rugged metal design, and backed by the industry's highest rated technical support.
• Get professional results every time with automated X/Y/Z offset calibration, nozzle wiping, and self-leveling features.

User questions & answers

Question:	can it be used with Mac
Answer:	In your settings, change the portrait to landscape, or vice verse.
Question:	What knd of software is necessary to go from a Solidworks file to the printer? What slicing software is used? How do you add in the soluble support
Answer:	I have mine in a thermal printer
Question:	Are any filaments included with this
Answer:	Labels themselves are essentially identical. Fanfold does not require the label holder whereas the Roll requires it in order to rotate around an axis.
Question:	Can you really make a functional drill
Answer:	amazon requires label size of 3" x 1" or 2" x 2". Are you able to supply these sizes ?

Product features

Easy, Professional Results

An all-new filament runout and stripping detection system provides carefree 3D printing. Included automated X/Y/Z offset calibration, nozzle cleaning, and self-leveling features deliver professional results every time.

Multi-Material & Soluble Supports

Enjoy true multi-material printing with dual active-lifting hot ends. Hardened-steel components enable printing with a wide range of material combinations, including flexible and rigid, strong and durable, and soluble support materials for complex designs.

Superior Print Quality

Get accurate results with LulzBot’s new X/Y/Z backlash compensation, a technology used in precision machinery. Premium E3D Hot Ends with 360° part cooling enable clean transitions between materials, while the belt-driven Z-axis provides exceptional print quality and faster cycle times.

Award-Winning* Reliability

With over 80 industry awards in 2018*, LulzBot 3D Printers have a long-standing reputation for reliability. LulzBot is a trusted brand in Automotive, Consumer Products, Aerospace/Defense, Medical, and Education industries around the globe.

Largest Material Selection

The industry’s widest array of supported materials is at your fingertips with ready-to-print profiles including flexible, rigid, composite polymers, high-heat, high-strength, and chemically-resistant filaments.

Easy, High-Quality Results

LulzBot 3D Printers are ready for work right out of the box, including over 30 pre-configured material profiles in Cura LulzBot Edition, an open source slicing software. Intuitive operation and exceptional documentation make getting flawless prints simple.