12 best abrasive cut off wheels

Product description

When looking for long lasting, high performance cut off wheels, Lincoln Abrasives delivers. These wheels have been engineered to stand up to the stringent MPA-Hannover requirements for quality and durability. A proprietary aluminum oxide grain combination yields fast, burr free cutting with long life. Suitable for cutting stainless steel, carbon steel, aluminum, copper, and more. Reinforced with 2 full fiberglass sheets for safety. 60 grit aluminum oxide abrasive that is resin bonded for maximum life.

• 4-1/2" diameter, 7/8" arbor, .040" thickness
• 100 cut-off-wheels per order
• Long lasting aluminum oxide abrasive for stainless steel and most metals
• 13,300 RPM max speed
• MPA-Hannover and EN 12413 quality certifications

• 【50 PACK】This is for a pack of fifty (50) pieces of our cutting wheels.
• 【SIZE】Each disc is four and a half (4.5) inches in diameter with a 7/8" metal center and 0.040" thickness.
• 【MATERIAL】Proprietary aluminum oxide grain combination for aggressive cutting action.
• 【APPLICATIONS】These cutting discs are designed for cutting fiberglass, steel, iron, plastic, stainless steel, and other ferrous metals.
• 【SAFETY】Wear all applicable safety gear when using these discs (eyes/ears/face/hands/body/etc).

User questions & answers

Question:	Will these work with the Dremel Max Saw
Answer:	The tool only has the limitation of what will fit between the two rollers and have the right amount of contact to sand the surface and whether the grit of sandpaper you want is available...other than that, it could be used to sand just about anything.
Question:	Can this be used to grind concrete
Answer:	The one I received was 110 volts, I live in Texas. I think if you live overseas where 220 volts is used they ship with 220 volts.
Question:	What is the max rpm for these wheels
Answer:	Sorta. It will, but it is not a particularly positive lock. In some cases, I prefer a "dead-Man" switch, but this tool requires both hands to operate and having to hold the switch in position adds another stress.
Question:	where are these wheels made
Answer:	Manufactured in China to European standards.

Product description

This 14-Inch Abrasive Cut-off wheel is designed for a Metal Cutting Power Saw either a bench style or Gas Power Cutter. This is a general purpose 36 grit abrasive cutting with an industrial bond designed general cutting of metals, such as steel, angle iron, rebar, copper, brass and other Ferrous metals. Uses for this wheel are found in the following Industries for cutting steel, iron, Automotive, Auto Body Shop, HVAC, Mechanical, Welding, Fire and Rescue, Plumbing, Bridge Builders, Steel Framing Contractors, Landscapers, MRO mechanical engineering, General Contractors and many others. Component of this blade include a tough Aluminum Oxide resionoid reinforced bonded ceramic power that continually is exposed as the wheel is used. Sold as a packs of 5 for smaller jobs.

• 14-Inch diameter by 1/8-Inch thick, 1-Inch arbor Cut-off Wheel
• A36P B.F. General purpose 5 pack
• Aluminum oxide
• Cuts Ferrous metals, Steel, angle iron, brass, bronze, carbon steel, and other metals
• Consistent performance with long life

User questions & answers

Question:	Can anyone tell me the difference between this blade, Makita A-93859-5 14-Inch Cut-Off Wheel, and the Makita B-10849-5 14-Inch Cut-Off Wheel
Answer:	In my experience it was 7/64 which is 1/8 difference from 7/64 so it wasn't what I wanted, hope this helps
Question:	The Makita A-93859 cut-off wheel is advertised as being 1/8 inch thick but some of the customer reviews state it is 7/64th. Which is it
Answer:	These wheels breeze through 1/4" steel faster than any other cutoff wheels I have used, and aluminum is far softer, so cutting 1/4" aluminum should be like slicing butter.
Question:	Can this blade cut 1/4" aluminum
Answer:	The maximum speed for this cutoff wheel is 4400 RPM so you should be fine, as long as you understand that this is an abrasive cutoff wheel, not a saw blade.
Question:	Can i use this on a 3,500 RPM chop saw
Answer:	Each pad is about the size of the palm of your hand. They are intended to sand parts for building scale models. "Kitchen Cabinets" implies a lot more square footage will be sanded. It also implies latex paint, which will load-up these sheets and ruin them. They are intended for enamels that dry hard. 3M makes sanding blocks that will work for kitchen cabinets.

• 25 PACK: 25 pieces cutting discs included. Flat cut off wheels Metal & Stainless Steel for Size in 3”x1/16”x3/8”.
• PERFORMANCE: The cutting discs can perfectly work with all 3 inch angle grinders with 3/8-inch arbor and 1/16 thickness,operating up to 2,4000 RPM and 80M/S.Suitable for die grinders,air cut off tool and electric cut off tool.
• DURABLE MATERIAL: Each cutting wheel is made with oxide grains for easy slicing through metal and reinforced fiberglass mesh to increase strength and durability through cutting jobs.
• APPLICATION: Thinner design minimizes materials loss while the cut-off wheel for faster,cleaner cuts.Ideal for fiberglass ,carbon steel, stainless steel,plastic and all other ferrous metals.
• ABOUT US: BSP TOOLS is a trusted professional abrasives supplier for more than 19 years,we offer you high quality abrasive products with competitive prices.

User questions & answers

Question:	Can it cut with the blade
Answer:	Yes,the manufactured made in China.
Question:	Are they made in China
Answer:	You can use it cut through stainless up to 3/16 and it does a fine job.
Question:	what is the grit
Answer:	The diameter is 7/8 inch
Question:	what is the diameter of the sipndle
Answer:	I bought one of each for the same concern, there is a couple dollars difference which is odd as well. I've compared the boxes, and the wheels they are identical from every spec and to the eye.My only logical guess is the same as with many parts, one is the older obsoleted model, it could be the most negligible formula change when the wheel was made for the newer model, and that requires a new part number, so whichever one is older, maybe the A, I would expect would go away sooner. I noticed something very similar with a palm sander platen, they came out with a new part but it had all the same specs and looked identical, but maybe the foam composition had the slightest change that you would need a forensics team to prove

Product features

BSP Cut Off Wheels for most anger grinder

Product advantage:

1.Super long durability

2.High speed cutting

3.No need to change the wheels even for different materials cutting

4.comfortable experience

5.Fast cutting for various materials with minimum friction and low

High-quality & High-Performance

Size in 3” x 1/16” x 3/8”

Maximum speed :24000 RPM and 80M/s

Cutting Diameter：3”

Arbor:3/8”

Thickness：1/16”

Material :Aluminum Oxide

For Cutting Metal&Stainless Steel

Suitable for the most angle grinders

Application: For thin sheet ropes,thin walled profifiles and pipes made of metal and non ferrous metals,as well composite materials Use on angle grinder cutting wheel are more durable for customers.

Acting More Safely and Durably

This type of cutting disc is fully reinforced with 2 sheets of fiberglass mesh;

It will act acting more safely and durably;

Offering quality products to our customer is our mission!

Product description

The Makita 14" X 1" X 3/32" Abrasive cut-off wheel, 5/PK. (B-57598-5) is double reinforced for longer life, less burr and less vibration. Designed for cutting heavier gauge metal such as pipe or angle iron, The abrasive cut-off wheel is ideal for use with 14” Cut-Off saws. A special bond improves cutting speed and wheel life.

• Double reinforced for longer life, less burr and less vibration
• Up to 2 times the life of a 7/64" Thick abrasive wheel
• Up to 20% faster than a 7/64" Thick abrasive wheel
• Designed for cutting heavier gauge metal such as pipe or angle iron
• Special bond improves cutting speed and wheel life

User questions & answers

Question:	Is the item durable
Answer:	Sorry for the confusion. We keep trying to change the picture to show a 4-1/2" diameter cutting wheel, but Amazon isn't putting the change through. These are 4.5" discs.
Question:	Picture says 6”. Is it 6 or
Answer:	Yes it will cut, but aluminum is very soft and the wheel will load up fast. Not the best tool for the job. A saw is the best tool for cutting aluminum. Band saw, Circular, Hack, etc.
Question:	Does this cut aluminum
Answer:	Yes
Question:	Cuts cast iron well
Answer:	Yes,this can cut blade.

Product features

Cutting Precision

The heat-treated premium aluminum oxide grains helps in quick cutting and maintains high durability. The ultra-thin design helps in maintaining the balance while operating on metals with grinders, eventually providing a precise cutting to the metals and effortless experience of metal cutting.

Hassle-free Usage

These discs have the best strength, high cut-rate, bonded abrasive discs used for cutting metals including steel, cast iron, and stainless steel. The cutting disc is designed with double reinforced and sturdy fiberglass backing to be used regularly which also protects metal from shattering and provides higher resilience to the metals.

Universal Metal Applications

Used for general purpose cutting of stainless steel, carbon steel, aluminum. Fast cool cutting allows the operator to work with minimum pressure. Reduced heat affected zone during cutting minimizes burr creation. Its highly refined ingredients will not contaminate stainless steel giving it a long-lasting and perfect finish.

• 【Perfect Size】Outer Diameter:4.5 Inch (115mm) Inside Diameter:7/8 inch Thickness:3/64 inch. Operating up to 13,300 RPM. Suitable for most angle grinders, air cut off tool and electric cut off tool
• 【Premium Materials】GoYonder metal cutting discs are made of aluminum oxide grains that are durable and safe. It also provides aggressive cutting action and longer service life.
• 【Multiple Applications】Our cutting wheels are ideal for cutting iron, plastic, steel, stainless steel, fiberglass as well as all other ferrous metals.
• 【High Performance】3/64" Thickness Ultra-thin design for fast and precise cutting performance with a minimal burr and reduced material waste.
• 【Package&Safety】 Package includes 50 pieces of GoYonder cutting wheels（Please use all necessary protective gear when you use these cutting discs）

User questions & answers

Question:	Where is this made
Answer:	If you are referring to the blue color on the disc, it is just paint identifying the brand.
Question:	what difference does "blue" make
Answer:	13,300 rpms. Printed on the cut-off wheels.
Question:	What is the max rpms for these cut-off discs
Answer:	Yes,These cutting wheels fit sm20 Drimel.
Question:	Do they fit sm20 Drimel
Answer:	Yes and the cost is on point too. Don't waste your money on discount stores that you would pay less at. These last twice as long. Very happy with the product and will purchase again.

Product features

Aggressive Cutting Action

Made of aluminum oxide grain features durable and smooth which will last much longer, cut faster and cleaner, and wear down much slower than abrasive discs.

Durable Long Life Wheels

Each disc with a 3/64-inch ultra thin cutting edge design for fast burr free cutting and longer service life.Thinner design minimizes the surface area contact between the material and the cut-off wheel for faster, cleaner cuts.

Versatile Cutting Discs

Professional quality for cutting exhaust pipes, rebar, auto body frames, bar stock, stainless steel tubing, clamps, rusted fasteners and so on.

Product description

14" x 7/64" x 1" general purpose metal chop saw blade. Pack of 10.

• High performance aluminum oxide grain for long life and fast cutting
• High grain concentration for aggressive cutting action and smoother running wheels
• Proprietary material mix ensures durable long life wheels
• Pack 0f 10

User questions & answers

Question:	Is this blade for a 1" arbor
Answer:	Though you cannot zoom in, you can see on the blade the size: 14" overall size; 7/64" thick (which is about 1/8") and 1" arbor size. Hope that helps
Question:	Is this blade for a 1" arbor
Answer:	Yes just cut it slow.
Question:	Does this blade cut aluminum railing
Answer:	max 5500 RPM
Question:	How many rpm is this rated for
Answer:	Made in China. For the money you won’t find a better deal plus they work very well.

Product description

Makita has a deep line-up of metalworking solutions. Get the right accessory for cutting applications with Makita Inox thin Cut-Off wheels. The thin design requires less energy for improved battery life when used with cordless grinders (sold separately). it is ideal for making cuts in metal and stainless steel pipes, sheet and channel.

• 60 grit abrasive for cleaner cuts
• Aluminum oxide construction makes these wheels ideal for ferrous metals including stainless steel
• Thin design requires less energy for improved battery life when used with cordless grinders
• For making cuts in metal and stainless steel pipes, sheet, and channel
• 5/64"/.075" wheel thickness

Product description

3" x 1/16" x 1/4" Cut Off Wheels by Black Hawk Abrasives is designed for use on a die grinder or air cut off tool. These discs feature a 1/16" (.0625") Thickness which offers an extremely long life and increased lateral strength. Each 3" cut off wheel is made with premium aluminum oxide grains for quick cutting and is reinforced with fiberglass mesh for additional safety. These 3 inch cut off wheels are ideal for aggressive metal cutting applications especially those in more compact areas due to their smaller diameter. These discs are capable of cutting cast iron, fiberglass, steel, and stainless steel and are often used in the auto body and metal fabrication industries.

• 25 Pack Premium Metal Cutting Discs
• 3" x 1/16" Cut Off Wheel with 1/4" Arbor
• 1/16 Inch (.0625") Thickness for Long Life and Increased Durability
• Compatible with Die Grinder, Air Cut Off Tool and Electric Cut Off Tool
• Capable of cutting fiberglass, plastic, iron, steel, stainless steel, and other ferrous metals

User questions & answers

Question:	I feel stupid asking this, but can you use these with a dremel tool
Answer:	only if the saws arbor is the same size
Question:	Could these be used on a 4.5" circular saw
Answer:	It should work okay I use mine on a Milwaukee cutting saw
Question:	Will these work for a dremel Sawmax
Answer:	i used them on my Milwaukee battery powered cut off tool w/ same dimensions . they worked excellent --narrow kerf ,cutting up to 1/4 inch steel , thin stainless and some thin aluminum.would definitely buy again
Question:	are these compatible with the rotozip, with the 3/8" shank
Answer:	Sorry. I have not used it. Don't know the answer!

Product description

When looking for long lasting, high performance cut off wheels, Lincoln Abrasives delivers. These wheels have been engineered to stand up to the stringent MPA-Hannover requirements for quality and durability. A proprietary aluminum oxide grain combination yields fast, burr free cutting with long life. Suitable for cutting stainless steel, carbon steel, aluminum, copper, and more. Reinforced with 2 full fiberglass sheets for safety. 60 grit aluminum oxide abrasive that is resin bonded for maximum life.

• 6 inch diameter, 7/8 inch arbor, .045 inch thickness
• 100 cut-off-wheels per order
• Long lasting aluminum oxide abrasive for stainless steel and most metals
• 10,200 RPM max speed
• MPA-Hannover and EN 12413 quality certifications

Product description

When looking for long lasting, high performance cut off wheels, Lincoln Abrasives delivers. These wheels have been engineered to stand up to the stringent MPA-Hannover requirements for quality and durability. A proprietary aluminum oxide grain combination yields fast, burr free cutting with long life. Suitable for cutting stainless steel, carbon steel, aluminum, copper, and more. Reinforced with 2 full fiberglass sheets for safety. 60 grit aluminum oxide abrasive that is resin bonded for maximum life.

• 4-1/2" diameter, 7/8" arbor, .040" thickness
• 200 cut-off-wheels per order
• Long lasting aluminum oxide abrasive for stainless steel and most metals
• 13,300 RPM max speed
• MPA-Hannover and EN 12413 quality certifications

User questions & answers

Question:	Do these last are do they wear out fast
Answer:	Its made for something a bit more powerful but I'm sure you could if the arbor is large enough