12 best rack systems

Product description

An Amazon Brand

• 5-shelf shelving unit for your kitchen, office, garage, and more
• Each shelf holds up to 350 pounds (evenly distributed); total max load weight is 1750 pounds
• Wire shelves adjustable in 1-inch increments; no tools required
• Durable steel construction with black-coated chrome finish; adjustable leveling feet
• Product Dimensions: 36 x 14 x 72 inches (LxWxH)

User questions & answers

Question:	Could you set this up as 2 shorter shelfs side by side
Answer:	You would need to check your rack to see in the poles unscrew in the middle. I get the impression there were different versions of these racks. If they do you need a set of 4 caps, 4 threaded inserts and 4 casters or levelers. Check your pole size too, likely either 1” or 3/4” depending on the version.
Question:	Can you order more shelves? I don't want to buy another unit, I just need more shelves to space them closer
Answer:	Whitmor sells the shelves separately for $12.50. You can call Whitmor, Inc at 888.944.8667 or go online. Whitmor links to Amazon.
Question:	where can i download the assembly instructions
Answer:	super simple assembly. take 2 peices of the black thingies. they should have a mark saying top or a dot or something. they are conical so you snap them together on the legs. start on the near bottom of a leg on a ring and slide the cap till it snaps in place. do all 4 on the same ring, 1 level at a time.so caps, snap, shelf. the 1st shelf is the trickiest but once the second shelf is in place it has better stability. if this is not helping, try youtube.
Question:	I'm very frustrated. the plastic shelf holders are not snapping and staying closed what am i doing wrong
Answer:	I've purchased several of these and just have one more thing to add from the other comments. First, from the other comments you can gather that the pieces do not snap together with each other - they snap to the vertical poles. That's an important point left out of the instructions. Second, where most are saying hold them together and slide them down the vertical pole until they snap, you can do that but they most likely will snap in the same location, giving you same size shelves. The shelves are adjustable, so if you want different heights for each shelf, find the groove on the pole that is closest to giving you the shelf size you want. Then you can, making sure the arrow of the 2 interlocking pieces point up, just lay both pieces close to the groove and then you can slide them up or down to find the closest place to that spot where they will snap. One more thing is you need to make sure you put the shelf over the 4 poles as level as you can. Even though the pieces snap onto the pole, they can be knocked off if the shelf hits them too hard on one side or the other if you try to place it on askew. Doesn't have to be perfectly level - I did it by myself - but somewhat hitting all 4 clips at the same time and coming down over them as close to the same time as you can. The lip of the shelf has to be down in order for the shelf to slide over top of the interlocking pieces on each pole - that's what holds them together. Will not work with the lip up. I am a 60ish female with no real mechanical abilities so the first one was the hardest because the instructions left out key points. Hope this helps (I have put together about 5 or 6 of them now in my garage).

Product features

Open Shelf Design

Combining a clean, contemporary look with a conveniently adjustable design, the shelving unit offers open-sided, reliable storage space.

Dynamic Use

A useful addition to any kitchen, storage space, or workshop, each shelf can hold up to 350 pounds (total capacity 1750 pounds, evenly distributed).

Height Adjustable Shelves

Fully adjustable, you can move each shelf up or down in 1 inch increments by clipping the black, plastic sleeves around the metal posts.

Additional Features

Featuring a strong steel wire construction, leveling foot caps, and easy no-tool assembly with all necessary components included.

Product description

BRAND-NEW 36" x 18" x 72" inches STEEL WIRE STORAGE RACK by eeZe Rack



This is a Tested-HEAVY DUTY construction with 1,750 lbs of total system weight capacity! (without wheels)

(Other listings with the same dimensions that sells for cheaper are most likely NOT heavy-duty versions)

1. NSF CERTIFIED, Food Equipment; for home, commercial and and office environments
2. Industrial-strength steel wire construction
3. 5-tier shelving, each shelf holds 350 lbs. on leveling feet
4. Total system weight capacity: 1,750 lbs. on leveling feet
5. Shelve Spacing adjustment in 1-inch Increments
6. Easy to clean and corrosion resistant
7. Built-tough, will stand the test of time
8. Product weight: 35.5 lbs Shipping Weight: 37 lbs
9. Easy assembly (NO TOOLS REQUIRED)
10. Finish: Chrome
11. LIFE-TIME WARRANTY

• 36"L x 18"W x 72"H, NSF CERTIFIED, Industrial Strength Steel, HEAVY DUTY
• Each shelf holds up to 350 lbs., Total system weight capacity: 1,750 lbs! (without wheels)
• Corrosion resistant, environmentally safe; Food equipment, home, commercial (LIFE-TIME WARRANTY)
• Easy assembly, adjustable shelves at 1 inch increment; NO TOOLS REQUIRED!
• COMPARE & SHOP: Our racks are HEAVY DUTY with 1 INCH DIAMETER POLES (NOT 0.75 inch) compared to other listings of the same dimensions or variations that sell for cheaper!

User questions & answers

Question:	Are there a minimum number of shelves you should have for stability? I would like to use this with only 3 shelves
Answer:	I'm using 3 shelves with a 24x18x96 with no problems.
Question:	The measurements state 36"l x 18"w x 72"h. i've read in some of the reviews that the width is 14". can you please verify that the width is
Answer:	Confirmed 36"l x 18"w x 72"h. I specifically bought this because of the 18"W.
Question:	Is there in black instead of chrome
Answer:	No
Question:	Puedo enviar este producto a mexico
Answer:	Sorry, we only sell US domestic.

Product description

Looking to make the most of your garage? This shelving unit is just the thing to help you clear up tools, equipment.  Each shelf can hold up to 350 lbs of weight, making this piece great for organizing even the big stuff. 

Size: 48" W x18 D x72 H (with stationary feet) 48" W x18 D x76H (with wheels)

🚀 Delivery Time: 3-5 days

➤Our Guarantee

➊ We are fast delivery and guarantee that our customers receive our products within 3-5 days. 

➋ If item was damaged during transportation, please contact us! we will sent replacement parts free of charge in few days.

❣【Broad Usage】

☀【garage / sheds / basement / industrial warehouse】

☀【restaurant / kitchen / pantry】

☀【laundry room / open loft / storage room】 

☀【office / studio / craft room / hydroponic stuff or plant】

Features:

▶ Metal rack could accommodate a variety of items.

▶ Storage shelf’s layer can be set at any height for your individual needs.

▶ Wire shelving Unit have helped in organizing garage, kitchen, office and so on.

Multipurpose 6 Tier Wire Shelving

--The total weight limit of the whole shelf is 2100 pounds when equally distributed on feet levelers.

--Weight limit of each Wire Shelving is 350 pounds when equally distributed on feet levelers.

--Maximum entire unit weight capacity is 500lbs when equally distributed on casters.

Specifications:

NOTE:DO NOT MOVE while loaded.

Dimensions: 48"L x 18"W x78"H (With stationary feet)

Dimensions: 48"L x 18"W x82"H (With Wheels)

The steel wire of the storage shelf is very durable, so it can hold a lot of things.

• 【Dimensions-Material-Capacity]: 48" W x 18" D x 82" H （w/wheels）chrome shelving made of rustproof and oxidation resistance steel construction, resist dirt buildup and corrosion. Huge capacity hold a ton of stuff and a lot of weight, the per unit weight capacity on feet levelers is 350lbs (no casters), But max entire unit weight capacity is 500lbs on wheels(w/casters) ; 🔔 Note that the limit on the weight it will hold depends on if you are using the casters or not, and it is a big difference.
• 【NSF Adjustable Wire Shelving Unit】You can adjust the height of the storage shelves according to the size of the item. uses a slip-sleeve locking system, You can adjust the height of the storage shelves according to the size of the item.Each layer of this metal shelf can be adjusted. wire shelving unit adjustable in 1" increments.storage shelves metal shelf wire shelving unit.
• 【Easy to Assemble】- Our chrome unit easy to assemble and you need no tools. you can plan out the spacing and marked on the shelf to make it line up with the marks on the posts to ensure the rack balance. Please attention to the orientation of the black unit clips (thin edge up), sliding shelf down into place where they snap together. But it's helpful to have an extra person, due to the weight and bulk. PS: It's easier to assemble horizontally on the floor and then lifting unit to stand.
• 【Heavy Casters Roll Effortlessly】-The heavy duty shelving wheels with ball bearing swivels and locking brakes on two wheels. it's easy to lock and unlock, this makes it easy to rearrange and move your shelves even when loaded.when you want to re-organize your garage with the wheels you just roll the shelf so you can clean the floor and walls.If you want to secure the heavy metal NSF wire shelf rack in place, you can lock it. you can using mobile Rack in different areas as time goes by.
• 【Our Guarantee】- ➊ We are fast delivery and guarantee that our customers receive our products within 3-5 days. ➋ If item was damaged during transportation, please contact us! we will sent replacement parts free of charge in few days.If you are not satisfied with this storage rack, please feel free to ask! Unit rack storage shelf metal wire.

User questions & answers

Question:	once the shelves have been Put in place can they be readjusted
Answer:	Yes. They can be easily adjusted. Tap the shelf corners upward and shelf will come loose. Readjust the two half clam shells on each corner to new height position. Then tap the shelf down.
Question:	How much space is between the shelves
Answer:	You can set them at any Heights U Want you can have them three inches apart are you going to have them 24 inches apart the inserts that go with holding the Shelf up it's how you said it they put together and then you slide the shelving unit on down the pole I've got some mind set at 13 inches holding poly containers and some I've got set at 34 inches
Question:	Is the size of the poles compatible to others like U-Line? We want to get additional shelves
Answer:	I don't know What a U-Line is . But the shelves I bought holed a heavy load. I really like the rack. If you give me the measurements I will measure mine.
Question:	I bought this a few years ago and now need more shelves. Can I buy more shelves for this unit
Answer:	I wanted to do the same thing. After doing some research, I concluded that buying a complete unit and using only the shelves would be much more cost effective.

Product features

Outstanding Weight Capacity

Each shelf of the wire shelving can hold 350 lbs with feet levelers when weight equally distributed, total 2100 lbs with feet levelers. The whole metal rack can hold 500 lbs if assembled with 3" caster.

Smooth Edges

The shelf is made with great craftsmanship so that no burrs will hurt your hands. Every weld is tested. The coating surface is smooth and easy to clean.

Rust Resistant Surface

The surface of the shelf is chrome plated that is not easy to rust in water, and can be wiped with dry cloth. So, it saves time and manpower.

Simple Installation

No tools needed to assemble this wire shelving, assembly instruction included. The wire shelf installation can be finished within 15 minutes. Awesome metal rack it is.

High Density Steel Material

The wire shelf is made of high density steel and is NSF listed, with 2 years warranty. The advantage of large capacity is worth your choice.

Two Options

Casters can be installed at the bottom of the shelf, as well as fixed screws blocks. So you can switch as needed, just unscrew them.

Adjustable Lock

The height of each shelf can be adjusted according to the different items you put, which is very convenient for your storage.

Suitable for Various Places

Our shelves can be placed in varieties of places such as kitchen, living room, bedroom, garage, office and etc.

Product description

The DEWALT DWST08260 Tough System workshop racking system is a Modular self-assembly solution that is compatible with all Tough System modules, allowing to store and pull out products quickly and easily. The workshop racking solution can be fully Customizable for an array of arrangement options and allow to add a self-made shelf on top of brackets for additional storing. Stacking side latches allow attaching additional organizers or other Tough System modules. Each racking system can carry up to 440 lbs. Includes: 2) 6ft metal bars, 2) horizontal beams, 5 pairs of brackets (for toolbox and/or shelf).

• Compatible with all Tough System modules
• Customized organization with an array of arrangement options
• Robust racking solution can load up to 440 lbs
• Brackets support shelf add-on option
• Stacking side latches allow attaching additional Organizers or other Tough System modules

User questions & answers

Question:	Will dewalts tstak fit and lock onto of bottom with this system
Answer:	NO. The ToughSystem and TSTAK lines are different sizes and do NOT fit or stack together.
Question:	are these stackable with the tstack cases interchangeably
Answer:	NO. They are NOT interchangeable! The ToughSystem boxes have different lengths and widths from their TSTAK cousins. And the bottoms are molded differently.I have them both. They do not fit together to create an interlocking stable stack.
Question:	What improvements have been made over the old tough system drawers
Answer:	The overall construction of the drawers and drawer boxes are considerably better. The boxes are a little taller and don't fit where I had the old ones on my van shelves. I am much happier with the new style.
Question:	What are the interior dimensions of the box? I have a tool that is 19"x12" x8" and I was wondering if it would fit
Answer:	Well, they look bigger on the outside, OK. bottom interior measurement 10Wx18Lx11H......this box has a tray 2 3/4 inches deep that sits on bearing reinforced struts....but empty the lid is 1 inch clear to the lowest point of the lid reinforcements at the hinge point of attachment...so 10 inches deep to the top of the box, add 1 inch more to the lowest point of the lid. Tragic is this for you, because your tool as described will not fit. Great boxes for what they are, yet I think the pricing could be more competitive. The concept works good for me and I would recommend this to a friend with deep pockets. :)

Product description

Creative Options is an innovator in craft organization and storage with its line of fashion-forward, functional and affordable products. Whether you knit, scrap, sew, or bead Creative Options' goal is to keep you -- and all of your crafts – organized. The innovative Grab-N-Go Rack System adds more storage, more versatility and more value. Each storage system includes a variety of utility boxes that feature the Pro-Latch locking system that keeps contents secure even if you drop it accidentally. The front Dura View cover offers access to a variety of utility boxes. The top lid also features the Pro-Latch tension locks and opens to a storage area for larger items. The 1363-85 Grab N' Go Rack System with 2 - #2-3630 Deep Pro-latch Organizers and 1 - #2-3650 Organizer measures: 13.13"L x 9.88"W x 13.75"H.

• Adjustable compartments
• Exclusive Pro-Latch locking system
• Perfect for sewing, crafting, beading, sewing or scrapbooking embellishments
• Clear door protects boxes

User questions & answers

Question:	about how many compartments is in this box or in each box
Answer:	No, the box comes empty... but Amazon can sell you everything to fill it up!
Question:	Would this be good storage size for Lego friends minifigures and their accessories
Answer:	This is description from Amazon site. Bins & Things has everything you need for toy and toy accessory storage and organization. Store and organize your Kawaii Squishies, Beyblades, Hot Wheels, LOL Surprise dolls, Tsum Tsum figures, LEGOs, Littlest Pet Shop, beads, loom bands, Shopkins and more! Designed with heavy-duty, shatterproof, extra thick, BPA-free plastic. Kid-friendly, durable, and easy to use.
Question:	Is the top drawer (of the 3 clear drawers) open or is it divided into small squares
Answer:	If you remove all the divider each stack is approx. 9x7.6x2.5 inches.
Question:	What are the dimensions inside the trays? I need something at least 3in tall
Answer:	The very top tray has a smaller locking tab to fit the lid. So if you buy 2 of the containers only 5 of the trays will be able to stacked up as one with one lid.

Product features

Details

• Includes two deep 2-3630 and one 2-3650 Pro-Latch utility boxes
• Bulk top storage
• 13.125" L x 9.875" W x 13.75" H

Product description

Simplify organization of tools and supplies in your home with the Glide Slide Overhead Storage System from E-Z Storage!

Designed to offer a solution that'll answer your need for a versatile storage system, this unique overhead rack utilizes the space on your ceiling to give you additional space for storing household items and more. The patented storage system provides a safe and secure way to store and organize tools, accessories, and equipment in your garage by keeping things hidden from street view.

Built using top-grade steel, the adjustable rails are guaranteed to be durable yet lightweight. Reinforced with powder coating, its sturdy construction offers superior resistance to rust, weather, corrosion, and chemical for a lifetime of dependable use. The system can withstand up to 450 pounds of weight. 12- and 17-gallon totes require 15 inches of clearance, while 27-gallon totes need 18 inches of clearance.

Completely adjustable, the rails can be installed vertically or horizontally to fit your specific needs and meet space requirements in your attic, basement, or garage. The channels can accommodate almost every heavy-duty tote on the market. With the installation guide included in the package, setup will be a breeze. No need to hire a handyman to install the system.

Maximize space in your home and take advantage of wall and ceiling space in your garage. From ceiling to floor and a whole lot more, discover unique solutions from E-Z Storage.

• HEAVY-DUTY STEEL CONSTRUCTION - Made from high-grade industrial steel, this innovative storage system offers lasting durability for unmatched reliability. Each sturdy channel can store four 27-gallon tote/bin with a load capacity of 35 lbs per tote.
• CONVENIENT ADJUSTABLE RAILS - Designed to be compatible with any tote or bin on the market, the customizable rails can be adjusted to fit any heavy-duty storage bin. We recommend using the 27-gallon black totes with yellow lids for secure storage.
• VERSATILE STORAGE RACK - The E-Z Glide Tote Slide can be used to store seasonal items, holiday decors, miscellaneous tools and accessories, and so much more! Its height ensures safekeeping of your supplies during a flood.
• EASY INSTALLATION - Experience fast setup of this Slide Storage System! This package comes with all necessary parts and hardware: two 80-inch support rails, four 88-inch channel rails, and nine each of all Grade 5 hardware. Totes not included.
• LIFETIME LIMITED WARRANTY - With a lifetime limited warranty, this rack is a practical addition to any attic, garage, or basement. The unique system provides extra storage by utilizing ceiling space for a smart solution that simplifies organization.

User questions & answers

Question:	For that price is should include totes!! Good gravies
Answer:	No, just the storage racks.
Question:	Whats is the clearing needed for installing over garage door? ie.. how much drop before impending on garage door tracts
Answer:	18 inches
Question:	Do you have to use the black/yellow totes or can I use the smaller, see-thru type
Answer:	I’d recommend using the black and yellow (or a similar type) with heavy flanges along the top edge of the box as all the weight hangs from this flange.
Question:	What are the dimensions of the rails that the bins hang from, as in, how much lip is there for the bin to hang from and what is the height
Answer:	If you look at it from the end it’s an I beam. The internal height is about 2-1/8” and the lip is about 7/8”. That’s plenty of space. If it helps, I use the Home Depot HDX Tough Tote 27 gallon totes and they work great

Product description

ABOUT WALLMASTER

WallMaster is a manufacturer specializing in storage tools, hardware, hooks, racks, hangers and other home improvement tools for garage, basement, utility room or shed.

We got this whole vertical organization system to manage everything in order and make more room for you. I wouldn’t say it’s a life saver, but definitely a space saver.

You got requirements, we got solutions for you!

If you want to put everything in a line, I would definitely suggest you take a look at this whole kit of storage organizer system.

It got 6 Steel Hooks and 3 Rails which the hooks can snap on. The best part of it is that you can move the hooks on the rail according to the size of your things.

The double hooks design makes it a perfect organizer for ski boards or snowboards. It’s very easy to install and the whole kit can hold up to 265lb.

SPECIFICATION

Length & Width & Thickness of the Rail: 16in*4in*0.7in

Weight of the Whole Kit: 6.6lb / 3kg

Weight Capacity of the Whole Kit: 265lb / 120kg

Material: Steel

Hole Quantity: 12 Holes

Feature: Expandable Rail & Adjustable Hooks

INCLUDE

3 x 16" Steel Rail

6 x Hooks

12 x Metal Screws

12 x Wall Anchors

• ADJUSTABLE STORAGE SOLUTION → The best part of the garage storage system is that the hooks can snap on the rail and move around on it to meet your actual needs.
• SPACE SAVING → Organize all your gear or tools on the storage rack to free up floor space and provide easy access.
• EASILY RELOCATE→ Garage hooks can be easily repositioned anywhere on tracks of the panel when storage needs change. And fast wall-mount hooks can install in a snap.
• EASY TO INSTALL→ All you need is an electric drill and a level to make sure it’s lined up perfectly while mounting on the wall studs. The hooks can be snapped on to the rail and moved around freely, offering customizability to suit all your needs, including extra wide items such a ladder etc.
• HEAVY DUTY STEEL → Our garage tool storage organizers are well made, you can tell from the quality of the steel and the fine work while processing it. And this garage storage rack can totally hold up to about 265 lb, which make it hold heavy stuffs like chairs, ski board, strollers, shovels, rakes or power tools, garden tools for years. Rubber-coated sleeves prevent the tools from being scratched or from slipping.

Product features

GARAGE STORAGE SOLUTION

This garage organizer is sturdy enough to hold heavy stuffs for years, such as power tools, garden and yard lawn tools, like folded chairs, ladders, shovels, water hoses, brooms, rakes, axes and part of outdoor equipments.

Expandable Racks & Adjustable Hooks

Feel free to move the hooks on the rail to accommodate to the place based on the tools.

Space Saving

Tidy up your garage, shed, basement, kitchen, pantry, craft room, basement, entryway, mudroom and utility room.

Heavy Duty Hooks

Anti-scratch hooks can hold up to about 250lb.

The Whole Package

• 6 * Double Hooks
• 3 * 16inch Rails
• 12 * Metal Screws

Product description

With the Racor Ceiling Storage Heavy Lift you can create 16 square feet of additional storage space without compromising floor or wall space. The Ceiling Storage Heavy Lift gives you a convenient storage solution for all of those bulky items that take up so much space on the floor, such as seasonal storage, boxes or totes, outdoor furniture, large tools, tires, or just about anything else you can think of. Made of steel construction, the Ceiling Storage Heavy Lift has a unique pulley system that lets you easily load and lift up to 250 pounds of storage items to the ceiling and lock securely in place. The Ceiling Storage Lift easily lowers 8 feet from the ceiling when you want to retrieve or add items. Raise and lower using a hand crank or attach your power drill. It has everything you need to store large items the safe, easy way without your feet ever leaving the ground.

Assembly required; installs into ceiling joists. Order yours today, and reclaim your garage!

The RacorPro PHL-1R Pro HeavyLift Storage Rack lets you load and lift heavy items to the ceiling for storage without the need for a ladder. It helps to free up valuable floor space in your garage or storage area and allows you to store heavier items, such as furniture, lawn mowers, tires, canoes, snow throwers, and more. The heavy-duty 4-by-4-foot platform is built to last and provides 16 square feet of additional storage space in your garage or storage area.

Heavy-Duty Lifting Capacity for Heavier Items

The PHL-1R is both tough and durable, and it's built to handle heavier items up to 250 pounds. The heavy-duty steel support beams and 4-by-4-foot platform are made from high-quality materials that are made to handle tough loads and provide years of consistent performance. The unit is built to lower 8 feet from the ceiling, accommodating storage spaces with taller ceilings. The drill driver attachment allows you to raise and lower the platform using your own drill.

The unique pulley system makes it easy to raise and lower heavy items with minimal effort on your part. With a durable winding axle that works in conjunction with the pulleys and strong nylon cables, the PHL-1R handles the brunt of the weight so you don't have to, while raising or lowering the platform quickly and smoothly.

Safety Lock Ensures Safety and Stability

The innovative safety lock ensures that the load stays locked into place when fully raised to the ceiling. Simply use the winding crank to engage the safety lock when the platform is raised to its highest position, and use the winding crank's integrated hook to disengage the safety lock and safely lower the platform.

An Additional 16 Square Feet of Storage Space for Your Garage

The PHL-1R's tough 4-by-4-foot platform gives you an additional 16 square feet of valuable storage space in your garage or storage area. This allows you to store your lawn mower out of the way during the winter or to store your snow thrower during the summer months, clearing valuable floor space and creating tidier, more useful quarters.

The RacorPro PHL-1R HeavyLift Storage Rack measures 49.25 x 17.5 x 7.25 inches (packaged) and weighs 74 pounds (packaged). It comes in a smooth black finish and includes all necessary hardware. Additional tools required for installation include: stud finder (for drywall ceilings), adjustable or box end wrench, socket wrench, cordless drill/driver, Phillips screwdriver, pencil, and a 4-foot straightedge or chalkline.

What's in the Box

Winding crank assembly, two arm assemblies, two cable assemblies (including nylon cables), three wire grids, two wire beam supports, center spindle square end, center spindle round end, gear drive, Allen wrench, four end caps, 20 hex bolts, four Allen head screws, two hex head screws, two fender washers, eight long machine bolts, 16 washers, eight nuts, 12 "J" hooks, 12 washers, 12 nuts.

• Adjustable - Mounts to any ceiling, adjust to angle ceilings with the built in nylon rings
• Durable - High strength steel allows you to lift up to 250 pounds
• Efficient - Raises and lowers by crank and includes all installation accessories
• Reliable - Steel cables allow for 8ft of vertical lift and securely locks into place
• Reclaim Your Garage - 16 sq feet of additional overhead storage space with the 4 ft X 4 ft design, making more room for the things you want to do

User questions & answers

Question:	Does the rack have to be fully retracted to lock? For example, can it be raised half way and lock
Answer:	You can lock it pretty much any height you want. You raise and lower by turning a loop and the lock puts a pin in the loop so it won't turn.
Question:	Do you need to install any lag bolts in the T-bracket section? Directions only show 4 bolts on each of four arms. I want to straddle a metal i-beam
Answer:	Sorry I don't know the answer to that question. I had a handyman install it who has installed it several times. I know he said he used different stronger bolts that were in the original package and said the unit would now hold up to about 300-400 lbs. without worry. You will love it. It's the best solution around.
Question:	my ceiling is about 18 feet in the garage. Can I extend the cables/controls
Answer:	I have 9' ceilings in my garage and the platform lowers to within 18" of the floor. You could add cable to extend the drop to accomodate the added height from the original point. However your highest lift point would be about 7'6" above the floor. I am sure any alterations would void any warranties to the product. On a side note: I have two now and will be ordering at least one more soon. As far as control rod, you will have to extend it to meet your needs. The directions suggest a 1/2 inch drill but I had a local machine shop turn the insert down to fit a 3/8 drill. I might advise you to not use a cordless drill. I personally would consider going a little lighter on the max weight.
Question:	I'm surprised no one mentions that you have to drill ten holes fairly close together in each joist for the lag screws, according to instructions. Ten seems like overkill. Won't this weaken the joist
Answer:	Most ceiling joists are 2x6 and bigger and I have installed two of these lifts on the same joists and have not seen a problem with sagging or splitting of the wood. Considering the lift will hold up to 250 pounds it needs to fastened securely. If you are concerned about your joists being weakened by drilling I'm sure you could come up with a cripple stud solution where a second piece of wood is fastened to the original joists with three bolts and then the lift is screwed into the cripple studs. Still drilling the original joist but only in three places rather the ten.

Product features

Racor Ceiling Storage Lift

With the Racor Ceiling Storage Heavy Lift you can create 16 square feet of additional storage space without compromising floor or wall space. The Ceiling Storage Heavy Lift gives you a convenient storage solution for all of those items that take up so much space on the floor. The Ceiling Storage Heavy Lift has a pulley system that lets you load and lift up to 250 pounds of storage items to the ceiling and lock securely in place. Raise and lower using a hand crank or attach your power drill.

Product description

Organize and sort your space with Seville Classics Commercial 7-Shelf Bin Rack Shelving System. Shelving is finished in a platinum powder-coated epoxy. This model features 22 polypropylene (PP) bins of three different sizes: 12 Medium (14" D x 5.5" W x 5.5" H); 6 Large (14" D x 10.5" W x 7" H); 4 X-Large (14" D x 16" W x 7" H). Includes 22 bin labels and four 3-inch black wheels with two locking. Bins slide out and lock for easy use. Systems are NSF-Certified for storage in commercial environments. Units may store up to 150 lbs. per shelf when assembled on leveling feet, 25 lbs. per shelf on casters. Systems are also modular and can exchange shelves with other Seville Classics units of the same pole diameter and shelving dimensions. Unit’s assembled dimensions measure 14" D x 36" W x 56" H. Ideal for use in garages, warehouses, mail rooms, schools, offices, work centers, and retail environments. Do not move bin rack while loaded

• 22 polypropylene bins in three different sizes (M, L, XL)
• Bins slide-out and lock for ease of use and safety
• Certified by the NSF to NSF/ANSI Standard 2 - Food Equipment, for use in restaurant and commercial environments
• Platinum epoxy finish for protection against corrosion in dry environments
• Includes four 3-inch wheels with two locking wheels
• Shelves adjust at 1-inch increments
• Do not move bin rack when loaded
• Patented

Specifications

Dimensions: 36" W x 14" D x 56" H

Capacity: 25 lbs. per shelf

Capacity on Leveling Feet (not included): 150 lbs.

Model #: WEB452

What's in the Box?

4 pairs of poles (1" diameter)

7 shelves (14" x 36")

4 extra-large bins

6 large bins

12 medium bins

28 slip sleeves

30 bin labels

4 wheels (3" diameter)

Limited 1-Year Manufacturer's Warranty

Seville Classics products are backed by a 1-year limited warranty unless otherwise specified. The warranty protects against original defects in material or workmanship under normal home or office use for the duration of the warranty period.

• 22 polypropylene bins in three different sizes (M, L, XL)
• High capacity shelves measure 14-inches deep by 36-inches wide
• Certified by the NSF to NSF/ANSI Standard 2 - Food Equipment, for home, commercial and and office environments
• Includes four 3-inch wheels with two locking wheels
• Platinum epoxy finish for protection against corrosion in dry environments

User questions & answers

Question:	How rust resistant are these shelves? Would they work well inside a non-air conditioned garage in Florida? Is one finish better suited than another
Answer:	Minor in a non-air-conditioned garage. I am Magine in 10 years they may get rusty. But you could always give them a quick touchup with some spray paint. I believe mine will last for 20 years or longer
Question:	Do the shelves go with the lip up or down? before i go any further i want to know - does it matter? currently have the lip up and the bottom shelf on
Answer:	Do not know what you mean by lip up. I guess you mean the ledge at rear of shelf well it would go up to prevent bins from falling off back. And the shelf should only properly go one way, because holes are tapered to lock in. Hope this was helpful.
Question:	Does Seville offer a divider for the smallest bin ? I bought dividers for the 2 largest bins with this set, but do not see any for the smaller bins
Answer:	Hello, The smallest bin which is a medium sized bin does not have a divider. We have dividers only for the Large and XL bins. Amazon guidelines prohibit posting our phone number, however our customer support phone number or email address can be found on our website, by clicking the "contact us" link at the top of the web page. Thank you, Stephania
Question:	Is there a cart cover that can be purchased for this cart
Answer:	Hello, Thank you for your question. We do not sell a cover for the bin rack system. Amazon guidelines prohibit posting our phone number, however our customer support phone number or email address can be found on our website, by clicking the "contact us" link at the top of the web page. Thank you, Stephania

Product features

Commercial 7-Tier NSF 22-Bin Rack Storage System, NSF Certified

Store supplies and tools with Seville Classics 7-Tier Bin Rack Shelving system. Unit features 22 gray bins in three different sizes. Bins slide out and lock against the frame for safe, easy access. System is certified by the NSF to NSF/ANSI Standard 2 - Food Equipment, for use in commercial environments. Our shelves are designed for heavy-duty work with industrial-strength steel wire and a platinum epoxy powder coat for defense against corrosion. Ideal for use in garages, warehouses, mail rooms, schools, offices, work centers, and retail environments.

NSF Certified

Rest easy knowing these shelves are certified by the NSF to NSF/ANSI Standard 2 - Food Equipment, for use in dry environments. Designed with multipurpose storage in mind, these shelves are ideal for professional and personal scenarios.

Industrial Strength Steel

Units are constructed of steel wire for reliable, high-capacity storage. Install the included leveling feet for heavy storage – up to 150 lbs. per shelf.

Limited 10-Year Warranty

The warranty protects against original defects in material or workmanship under normal home or office use for the duration of the warranty period.

Platinum Epoxy Protection

Corrosion resistant and easy to clean, a platinum epoxy coat ensures your Seville Classics shelving system is protected from the elements and will stand the test of time.

Assorted Bins

Included are 12 medium bins, 6 large bins, and 4 extra large bins. They slide out and lock for convenience.

Labels

There are labels included to help you easily identify your things.

Bin Dividers

Use these bin dividers to create the space that you need.

Easy Mobility

Ability to transport multiple items with ease.

Office

Great storage solution for arts and crafts and other office supplies with the different bin sizes.

Workshop

Safely store and organize sharp and small objects in your workshop.

Product description

Product Details

An intelligent cooling fan system designed to be mounted onto a wide range of 19-inch racks requiring quiet or high airflow cooling. Maintaining an optimal temperature for rack-mount equipment prevents overheating, ensures constant performance, and extends their lifespan. The system is housed in a solid aluminum construction that takes up three rack units of space (3U). Each aluminum frame is anodized with a light-brush finish for a high-end professional appearance. This model holds three custom-engineered dual-ball bearing fans rated at 67,000 hours, and certified by CE and RoHS. The fans are set to exhaust out heated air and should be positioned near the top of the rack; an intake version of this model is available, sold separately. This complete kit includes the 3U fan unit, corded 6-ft thermal probe, user’s manual, rack mount screws, cage nuts, and corded 6-ft power supply.

Intelligent Cooling

Programming includes an easy-to-use thermostat and a SMART mode that automatically adjusts the fan’s speed to react to varying temperatures. Additional features include alarm alerts, fan failure triggers, power savings setting, display lock, and backup memory. Six fan speeds are available with three screen brightness settings. Behind the unit is an expansion port that can control another CLOUDPLATE unit or an AC Infinity rack roof dual-fan kit.

Performance and Applications

This 3U rack cooling system features programmable fan speed control, enabling it to work for a wide range of rack mount applications. With a noise level that can reach 12 dBA, the fan system can be used for environments where low or minimal noise is required such as home theater, studio, DJ, and audio video racks. A max airflow rating of 300 CFM will provide sufficient cooling to server, network, IT and equipment racks requiring high airflow. This fan system contains premium dual-ball bearings, allowing it to be mounted horizontally or vertically.

• An intelligent fan system designed for cooling audio video, DJ, server, network, and IT equipment racks.
• Protects rack-mount equipment from overheating, performance issues, and shortened lifespans.
• Programmable thermostat controller with automated speed control, alarm warnings, and backup memory.
• Premium anodized aluminum construction with CNC-machined detailing for a professional appearance.
• Size: 3U Rack Space | Design: Exhaust | Airflow: 60 to 300 CFM | Noise: 12 to 38 dBA | Bearings: Dual Ball

User questions & answers

Question:	Can this unit be rear mounted (top) while intake mounted in front (bottom
Answer:	That is essentially what my own setup is. 1U intake bottom front of my 12U rack, 3U exhaust top rear of my 12U rack.
Question:	Can this be mounted in the roof rack space on a sanus cfr
Answer:	Yes, this will fit into the roof of Sanus equipment racks. I've fitted it into two different Sanus rack models, and the only thing is that any remnants of the original grill (that was removed to allow the installation a fan) that protrude into the mounting space may need to be filed down to permit the CLOUDPLATE to slide in all the way.
Question:	Can the airflow be reversed, either by switch or by removing fans and remounting in opposite direction
Answer:	They are not reversible fans. To reverse the airflow, you need to remove the fans and remount them in the opposite direction.
Question:	Can t9 intake/exhaust to cool an overclcoked i7 8700k to abt 80? If so would aio or a classic stock cooler work better. w/ 15u open back/front case
Answer:	Hello there, Although the CLOUDPLATE T9 and T9-N units are powerful and great cooling solutions, whether or not they will successfully cool your unit will depend heavily on how much heat is generated by your electronic devices within that rack. You may want to consider using blank panels to fill in any gaps in your rack to help create a cyclical airflow pattern. Thank you for your question, Kind regards, Andrew Avila AC Infinity

Product features

Stop Overheating and Optimize Performance

Keeping rack equipment and components cool below 93° F has shown to prevent overheating issues, ensures top performance, and extends their lifespan. It's a cost-effective solution that pays for itself in the long run.

Intelligent Programming

The cooling system features LCD temperature and fan speed controls. Additional functions include alarm alerts, fan failure triggers, and backup memory.

Ultra-Quiet Cooling

Each fan features dual-ball bearing fans that can blow horizontally or vertically. Controlled by a PWM motor and designed to reduce fan and bearing noise while maximizing airflow.

Plug and Play

Complete kit includes the fan unit, user manual, corded thermal probe, and everything needed to mount the fan onto your rack and power it through an outlet.

Product description

The Polder 4-Piece Advantage Dish Rack System is made from rust-resistant stainless steel with ample room to hold up to 10 plates and 6 glasses. The removable drying tray fits compactly under the rack and almost doubles the drying space when additional room is needed. Plastic padded feet protect the countertop from scratching and the angled, slopping tray directs water run-off right into the sink.

• Elegant design, full-size 4-pc. dish rack made from rust-resistant, brushed stainless steel and includes dish rack, drain tray, drying tray, & cutlery holder
• Removable plastic drying tray slides out to almost double the drying space—perfect for glass items—measures 14” x 13”
• Dish rack holds up to 10 plates and 6 glass posts—slopping drain tray directs water run-off into sink—measures 9” x 14" x 6"
• Removable utensil bin with split compartments keep utensils upright. Trays and cutlery holder are dishwasher safe (top rack only)
• For over 41 years, Polder believes in customer satisfaction and guarantees all of our products. If you are not satisfied, please contact our customer service for a replacement or refund.

User questions & answers

Question:	Is the drain tray angled so the water goes into the sink & NOT all over the counters
Answer:	Yes, the tray is angled and goes eight to the sink
Question:	Can you slide out main tray (not the extra side one) to wipe it off while dishes are in the rack
Answer:	The main drip tray is not easily removed from the steel rack. We have removed it for cleaning, but only when the rack is empty. It fits into the rack in such a way that it does not slide out easily.
Question:	Is it worthit
Answer:	Nope, I had a KitchenAid rack before this and will be going back. This item is flimsy, tips over, cup rack doesn’t work with most cups.
Question:	How easy is it to clean? does the rack come off of the rack? rust? scum
Answer:	Compared to every other dish drainer I've ever had (including those offered by Rubbermaid and Kitchen Aid), this dish drainer is by far the easiest to clean. The silverware holder does come off. Because it comes with the extra mat, it is easy to place the drainer (temporarily) on the other mat when wiping down the mat, even when the drainer rack is not completely empty. The drainer rack also sits higher above the mat than other dish drainers I've had, so even when the rack is full, there's enough clearance to wipe the underlying mat. Incredibly, I have had NO rust build-up after using this drainer for months!

Product features

Quality, Value and Elegant Design

Polder has been a leader in upscale consumer home goods since 1976. We make products that make daily tasks easier through innovation, value and good design. At Polder, life meets style.

Form and Function

Polder dish racks are as elegant as they are functional. Modular components and rust-resistant stainless steel make this a maintenance free kitchen essential.

Easy Entertaining

Cooking for four or fourteen, Polder has your dish drying solution. Durable construction and European design make Polder dish racks suitable for any kitchen decor.

Built-in Stainless Steel Plate & Cup Holders

Rust-resistant, brushed stainless-steel wire rack holds up to 10 plates and includes 6 glass/cup posts. Measures 20 x 14 x 7-inches.

Removable Cutlery Holder with Split Compartments

Large utensil bin with split compartments keep utensils upright. Open slat design increases airflow for fast drying and water run-off. Dishwasher safe, top rack only.

Large Drain Tray

Slopping plastic drain tray directs water run-off into the sink. Measures 9 x 14 x 6-inches.

Removable Drying Tray

Plastic drying tray slides out offering added drying space. Sturdy, raised platform is perfect for glass items. Stores under rack when not in use. Measures 14.25 x 13.25-inches.

Product description

FURINNO laci 4-bins system rack features unique structure: simple and stylish look is ideal as a decorative and home living essentials. This rack can be used for storage With the bins provided, or used as open displaying without the bins. smart Design: easy assembly and no tools required. A smart design that uses durable recycled PVC tubes and engineered medium density composite wood that withstand heavy weight. Just repeat the twist, turn and stack mechanism and the whole unit can be assembled within 10 minutes. Experience the fun of D-I-Y even with your kids. The composite wood is manufactured in Malaysia and made from recycled materials of rubber trees. The manufacturing process complies with the Green rules of production. There is no foul smell, durable and the material is the most stable amongst the medium density composite woods. The PVC tube is made from recycled plastic and is tested for its durability. A simple attitude towards lifestyle is reflected directly on the design of FURINNO furniture, creating a trend of simply nature. All the products are produced and assembled 100-percent in Malaysia with 95% - 100% recycled materials. Care instructions: wipe clean with clean damped cloth. Avoid using harsh chemicals. Pictures are for illustration purpose. All decor items are not included in this offer.

• Nonwoven Fabric Bins
• Simple stylish design: Open display shelf with non-woven bins
• Material: composite wood, high density non-woven fabric
• Fits in your space, fits on your budget
• Sturdy on flat surface. Easy no tool assembly, even a kid can do it
• Dimension: 11. 3(W) x 28. 8(H) x 7. 7(D) inches

User questions & answers

Question:	How tall
Answer:	Its just over 2 ft tall
Question:	Hi...can someone please tell me the exact measurements in inches of the tan cloth drawers? ( Thanks
Answer:	cheep wish I never brough it cant even get my money back
Question:	could I stack two of these on top one another
Answer:	I don't see why except for the tubes. They stick out the top a little. But if you take screws & anchor them together it would be fine. Just beware that they could tip so anchor to a wall. I love them they're the perfect size for what I needed. Ignore the complaints.
Question:	Is it big
Answer:	Its very small. Just over 2 ft tall. The drawers are about big enough to fit a book inside of.

Product features

Furinno

Furinno LACi 4-Bins System Rack features Unique Structure: Simple and stylish look is ideal as a decorative and home living essentials. This rack can be used for storage with the bins provided, or used as open displaying without the bins. Smart Design: Easy Assembly and No tools required.

A smart design that uses durable recycled PVC tubes and engineered medium density composite wood that withstand heavy weight. Just repeat the twist, turn and stack mechanism, and the whole unit can be assembled within 10 minutes. Experience the fun of D-I-Y even with your kids. The E1 Grade medium density composite wood is manufactured in Malaysia and made from recycled materials of rubber trees. The manufacturing process complies with the green rules of production. There is no foul smell, durable and the material is the most stable amongst the medium density composite woods.