12 best cmi christmas tree stands
If "CMI Christmas tree stands" is a specific brand or product line related to Christmas tree stands, we recommend checking directly with retailers that specialize in seasonal decor, home improvement stores, or the official website of CMI for the most current and accurate information. They would provide details on product features, sizes, and any new releases that may have occurred .
Below you can find our editor's choice of the best cmi christmas tree stands on the market
Do it Best Rotating Tree Stand for Artificial Trees Up To 7.5 Feet Tall
Product description
This rotating tree base can be used for Artificial trees up to 7-1/2' In height. The width of the tree trunk must be 1-1/4". The weight of the tree must be less than 80 lb. Spins approximately 3/4 circle per minute. On/off switch to control the base has 3.
- This rotating tree base can be used for artificial trees up to 7-1/2' In Height
User questions & answers
| Question: | Can you tell me what kind of plastic this stand is made of? I just broke one section of mine, and would like to re-glue it with correct type of glue |
| Answer: | The one I received (which looks like the picture), doesn't have the red pop-up level indicator. It has lines inscribed on the inside of the reservoir itself (which can be difficult to see once you have a tree installed). I had to lay on my side and stick my finger in the reservoir to see how low the water was. Would have been nice if they would have carried over a more easily view-able visual indicator of water depth... |
| Question: | Does this work with a pre lit LED tree that is 7.5 feet |
| Answer: | We have had it for several years now, our first tree was over 13 feet. It is an amazing stand. |
| Question: | The small gear inside my stand broke, does anyone know where to get a replacement? Thanks |
| Answer: | There is no drainage hole. After you remove the tree you simply dump any remaining water into the sink or outside. I would not want any drainage hole. No chance for a leak. It is a GREAT tree stand. Very well made and sturdy. I had a swivel stand, and this one one if far superior. |
| Question: | can hold a 4 feet tree |
| Answer: | The adapters came stored in a separate baggie. |
Best Choice Products 360-Degree Rotating Adjustable Christmas Tree Stand for Up to 7.5ft Artificial Tree w/ 3 Settings, 3 Built-in Electrical Outlets, Green
- DURABLE AND VERSATILE: This rotating tree stand is sturdy enough to hold any artificial Christmas tree up to 7.5' tall with a trunk diameter of 0.9"- 1.25" up to 80 pounds
- 3 EASY SETTINGS: Rotate your tree with lights on, turn just the lights on without rotation, or completely power it off
- 360-DEGREE ROTATION: Show every angle of your beautifully decorated tree, as the tree stand rotates continuously and makes a full 360-degree rotation every 70 seconds
- 3 BUILT-IN OUTLETS: The base contains 3 two-prong outlets to connect Christmas lights, preventing wires and cords from getting tangled or wound up
- OVERALL DIMENSIONS: 26"(L) x 26"(W) x 7.5"(H); Weight Capacity: 80 lbs.
User questions & answers
| Question: | How deep is the hole the tree sets in |
| Answer: | I believe there is no addition on the end of the light string. You will probably have to buy addition string to make the illusion of two strings together. |
| Question: | I have a 71/2' by 5' tree with 1200 lights and hundreds of decorations. Would this stand accomodate it |
| Answer: | My Wife love led Christmas string lights outdoor. |
| Question: | Will this work with smart outlets or do you have to turn it on manually each time |
| Answer: | I didnt measure but it is long |
| Question: | Why has no one contacted me for my refund since I never received the package |
| Answer: | No you can’t dim the light |
Product features
Product Development
Products mean a little more at BCP. We work hard to build innovative, popular, and timeless items that will thrive in your home. Behind your favorite Best Choice Product is a team developing the next best thing!
High-Quality Standards
When building our products, BCP does the heavy lifting for you. Before an item makes it to your home, it must first pass quality tests and our final stamp of approval. Every step of a product counts, and we never compromise high-quality.
Family Shopping
Christmas or Halloween? The debate is vibrant and ongoing 365 days a year, but while you decide if lights & garland or pumpkins & ghosts make your holiday, we’ll provide the selection to make your family “ooh” & “ahh” either way!
National Tree 36-Inch Folding Tree Stand for 9-Feet to 12-Feet Trees, Fits 1.25-Inch to 2-Inch Pole (FTS-36-1)
National Tree Company
Product description
For use with 9 ft. to 12 ft. tall artificial trees with 1.25\" to 2\" diameter center poles. Legs fold flat for storage. Sturdy steel construction. Includes thumb screw for securing stand to tree pole. ( Adapter not included )
- Nullify
- Imported
- For use with 9 ft. to 12 ft. tall artificial trees with 2" diameter center poles
- Legs fold flat for storage
- Sturdy steel construction
- Thumb screw included
User questions & answers
| Question: | What is the tree weight capacity that this holds |
| Answer: | Have no idea of its weight capacity. The box states it is "FOR ARTIFICIAL CHRISTMAS TREES 4 ft. TO 6 ft. (1.2m to 1.8m) Tall." Certainly would not put a 7 ft. or taller tree in it. The box also says, "Steel construction - For trees with a pole diameter of 1 1/4" (3cm) or less." |
| Question: | is this compatible with Martha stewart trees |
| Answer: | I used it for a commercial tree and a tree from lowes. It is adjustable by using screws |
| Question: | Is the opening 1.25 or is it larger |
| Answer: | The trunk opening measures just under 1.50". |
| Question: | When you say it is 28 inches what are you measuring |
| Answer: | Well, it's holding up the tree right now or I would measure the legs for you. It has got to be the length of both the legs together before the stand is unfolded. In other words from one leg diagonally across to the end of the other leg with the stand opened out for set up. I can also tell you this is a heavy duty stand and the length makes it very stable. Much better stand than came with my tree and it was far from a cheap tree. I'm very happy with this stand. |
Goliath Welded Steel Christmas Tree Stand for Live Trees 5 to 12 Foot
Goliath
Product description
Goliath welded steel Christmas Tree Stand For Live Trees 5 to 12 Foot, 7 inch max Trunk size, 28 inch Leg Span, .9 gallon water capacity, 4 steel support screws with steel end caps, Powder Coated Steel, Lifetime Warranty. Tired of your Christmas Tree falling over and Breaking your priceless family Christmas Tree Ornaments? Don't settle for a weak undersized plastic Christmas Tree Stand. Buy a GOLIATH Christmas Tree Stand! Made from heavy duty powder coated steel and backed by a lifetime warranty, GOLIATH Tree Stands are truly the last Christmas Tree Stand you will every buy! BUY WITH CONFIDENCE: Goliath Products LLC is a USA-based family owned and operated business established 4 years ago after spending 15 years in the Christmas tree stand industry, we knew we could manufacture better, stronger, tree stands that will last a lifetime. Our friendly USA customer service staff will assist with product and parts questions, and you won’t have to search all over the internet or Amazon for help. Our customer service phone number, and email address is clearly printed on the retail carton and the instruction sheet.
- For Live Trees 5 to 12 Foot
- 7 inch max Trunk size, 28 inch Leg Span, Legs Remove For Easy Storage
- .9 gallon water capacity, 4 steel support screws with steel end caps
- Powder Coated Heavy Duty Steel
- Lifetime Warranty
User questions & answers
| Question: | Would this be good for outdoor use |
| Answer: | I'm not sure as was a donation for my church ... believe that is battery operated |
| Question: | can this be used with an artificial tree with 2" diameter pole |
| Answer: | The tree is packed away and I don't remember battery size for sure. I'm thinking AA's though. I don't remember battery pack being large or heavy. You could leave out, but you'd see the unlit lights. It would be pretty with just the lights and no decorations. |
| Question: | What's the smallest size diameter tree it will take |
| Answer: | The tree I received has only basic lights. No holly leaves. No red berries. I supplemented with an additional set of lights, as - for me - what was provided did not give enough coverage. |
| Question: | What’s the diameter of the base? 28 inches total |
| Answer: | I think the box was 24 inches tall and about 12 inches wide. Hope that helps. |
Krinner Tree Genie M, Christmas Tree Stand with Foot Pedal and Single Cable Operation
Krinner
Product description
For 100% hassle free setup, just step on the foot lever until the claws firmly tighten the trunk. Features: . No cutting or sawing necessary. For trees up to 7 feet (2. 20m) high and trunks up to 4. 7 inches (12cm) diameter. Straight every time. No assembly required - no screws to tighten. Holds up to 1. 2 gallons of water, with fully automatic water level indicator that takes the guessing out of watering your tree. Fool-proof. 3 year . Ding Technology, has an integrated bell when the claws have securely closed around the trunk. Simply pump the foot pedal design. Patented safety belt. Comfortable fine adjustment.
- Set up your Christmas tree in less than a minute. No assembly required, no screws to tighten
- Patented internal safety belt for maximum security
- The patented bell inside the foot pedal lets you know with a DING when the tree is held at maximum strength. The pedal locks itself simultaneously to avoid any accidental opening
- 15.4" (39cm) diameter medium tree stand, base weight 13 lbs. (6kg)
- Secures any tree up to 7 feet (220cm) tall & trunk with 4.7 inch (12 cm) diameter
- Retains 1.2 gallons (4.5L) of water with automatic water level indicator
- Made in Germany
User questions & answers
| Question: | Would this work for a very large tree |
| Answer: | I would suggest contacting Amazon to find the information. |
| Question: | Is the model that ships the new version with the water level indicator |
| Answer: | I had this tree stand with our 6 1/2 old tree (not balsam Hill) and it fit fine. I bought a balsam hill tree, It fits but I am not sure if it’s the tree itself that wobbles and doesn’t stand up straight unless I fix it. |
| Question: | what size tree can it hold |
| Answer: | Although the description does not list 1.5 inch tree base the item does include one. I specifically required a 1.5 inch base. This is the only rotating base I had found with 1.5 inch adapter. |
| Question: | is there a drainage hole for water |
| Answer: | It’s not 1.25”. |
Product features
Krinner’s Original Single Cable Operation
Krinner's original single cable operation guarantees equal claw pressure around the trunk. This clever clamping device ensures that the tree stands absolutely firm and straight whether the trunk is thick, thin or crooked. No need for an axe or saw.
Ding Technology
The foot pedal has an integrated bell that 'Dings' when the claws have securely closed around the trunk. At the same time the foot pedal is automatically secured in the locked position.
Water Reservoir
Keep your tree fresh and looking great! The tree Genie M holds up to 1.2 gallons (5L) of water.
Goliath Welded Steel Artificial Christmas Tree Stand for Artificial Trees 8 to 14 Foot
Goliath
Product description
Goliath Welded Steel Artificial Christmas Tree Stand for Artificial trees 8 to 14 foot. Tired of your Christmas Tree falling over and Breaking your priceless family Christmas Tree Ornaments? Did your old stand break or did the support screws strip out? Don't settle for a weak undersized Artificial Christmas Tree Stand. Buy a GOLIATH Christmas Tree Stand! Made from heavy duty powder coated steel and backed by a lifetime warranty, GOLIATH Tree Stands are truly the last Christmas Tree Stand you will every buy! BUY WITH CONFIDENCE: Goliath Products LLC is a USA-based family owned and operated business established 4 years ago after spending 15 years in the Christmas tree stand industry, we knew we could manufacture better, stronger, tree stands that will last a lifetime. Our friendly USA customer service staff will assist with product and parts questions, and you won’t have to search all over the internet or Amazon for help. Our customer service phone number, and email address is clearly printed on the retail carton and the instruction sheet.
- Fits Artificial Trees 8ft to 14ft With a 3/4 inch to 2 inch Pole
- 36 inch Leg Span That Folds Up For Easy Storage
- Designed in the USA and supports Artificial Trees up to 300 lbs
- Re-designed for 2020 with 6 more eyebolts to allow for smaller tube sizes and increased steel thickness on brackets and bottom plate to allow for the heaviest trees. Powder Coated Heavy Duty Steel
- simply the best made artificial tree stand on the market. You will not find a better heavy duty tree stand and it is backed by a Lifetime Warranty
User questions & answers
| Question: | Our tree is 9 feet tall with a diameter that is 1 1/8 inch "trunk". Will this stand hold it |
| Answer: | About 30 to 32 inches clear across |
| Question: | Does it sit close to the floor? I need a stand that doesn’t increase the height of my tree too much |
| Answer: | I don't think it's heavy enough to not tip over for what you want. Sorry, but you might consider using a base for a patio umbrella. It's about the same size as the Christmas tree stand. |
| Question: | What is the diameter of the whole |
| Answer: | Have no idea of its weight capacity. The box states it is "FOR ARTIFICIAL CHRISTMAS TREES 4 ft. TO 6 ft. (1.2m to 1.8m) Tall." Certainly would not put a 7 ft. or taller tree in it. The box also says, "Steel construction - For trees with a pole diameter of 1 1/4" (3cm) or less." |
| Question: | How wide of a tree trunk will it fit? In other words, what’s the diameter of the part where the trunk slides in |
| Answer: | I used it for a commercial tree and a tree from lowes. It is adjustable by using screws |
Goliath Welded Steel Artificial Christmas Tree Stand for Artificial Trees 4 to 8 Foot
Goliath
Product description
Goliath Welded Steel Artificial Christmas Tree Stand for Artificial trees 4 to 8 foot. Tired of your Christmas Tree falling over and Breaking your priceless family Christmas Tree Ornaments? Did your old stand break or did the support screws strip out? Don't settle for a weak undersized Artificial Christmas Tree Stand. Buy a GOLIATH Christmas Tree Stand! Made from heavy duty powder coated steel and backed by a lifetime warranty, GOLIATH Tree Stands are truly the last Christmas Tree Stand you will every buy! BUY WITH CONFIDENCE: Goliath Products LLC is a USA-based family owned and operated business established 4 years ago after spending 15 years in the Christmas tree stand industry, we knew we could manufacture better, stronger, tree stands that will last a lifetime. Our friendly USA customer service staff will assist with product and parts questions, and you won’t have to search all over the internet or Amazon for help. Our customer service phone number, and email address is clearly printed on the retail carton and the instruction sheet.
- Fits Artificial Trees 4ft to 8ft With a 1.25 inch or Smaller Pole
- 24 inch Leg Span That Folds Up For Easy Storage
- Designed in the USA and supports Artificial Trees up to 200 lbs
- Re-designed for 2020 with 6 more eyebolts to allow for smaller tube sizes and increased steel thickness on brackets and bottom plate to allow for the heaviest trees. Powder Coated Heavy Duty Steel
- simply the best made artificial tree stand on the market. You will not find a better heavy duty tree stand and it is backed by a Lifetime Warranty
User questions & answers
| Question: | Do the legs lock down |
| Answer: | Yes the legs lock in the the down position and in the up position. |
| Question: | What's the diameter of the tube the pole fits in |
| Answer: | This fits poles 1/2 inch to 1 1/4 inch. The tube on the stand is 1.3 inches. |
| Question: | How do you measure the diameter of the pole |
| Answer: | Measure across the center of the bottom of the pole at it’s widest part. Our 8’ tree fitted just fine. |
JACK-POST Welded Steel Christmas Tree Stand, for Trees Up to 12-Feet, 1.7-Gallon Water Capacity
JACK-POST
Product description
Jack-post Corporation is an industry leader in manufacturing outdoor furniture and Christmas tree stands, founded in 1964.
- Nullify
- Imported
- Fits up to 12' tree with 7" trunk
- 29.75" leg span
- 1.7 gallon water capacity
- 4 T-nut tipped eye bolt welded tubular steel Christmas Tree Stand. Use for up to a12-foot tree, 6.25-inch trunk, 4-legs with a 29.75-inch base. Easy to fill 1.7-gallon oversized water bowl.
- 4 eye-bolts hold tree trunk securely. Steel spike base for stability. Tubular steel legs will not flex under the load of heavy trees. Corrosion-resistant 'gold tone' zinc-dichromate hardware.
User questions & answers
| Question: | Can u use this stand for a smaller tree too |
| Answer: | The diameter of the bottom of the Swivel Straight is 20 inches. As to whether it can be placed out side, I don't know. It is a very sturdy item but I do not know if it could withstand freezing temperatures. |
| Question: | Sell us some replacement feet, please |
| Answer: | It depends more on trunk thickness than height. I've had trees up to 7' in this stand but last year I had a shorter tree but it had a fat trunk and I had to trim off some of the sides. The cup that you slide onto the trunk of the tree is about 5" in diameter and it is rounded at the bottom. I just put my tree up today and I have about a 7' Fraser Fir, the cup slid nicely onto the trunk but any thicker and I would have had to shave some off. |
| Question: | What is the exact size of the eye bolts |
| Answer: | Well for me it was a dream come true talk about reducing Christmas arguments. As for watering it is just like any other tree stand. You have to bend over and pour it into the base. But be sure to pull the peddle all the way out. Step on it to adjust the tree and then once straight take the foot off the peddle and push the peddle back into the base. Once I figured that out it was A LOT eaiser. |
| Question: | Is there a center pin for insert into the trunk |
| Answer: | The height of the tree it can handle which also correlates with the size of its trunk. |
Goliath Welded Steel Christmas Tree Stand for Live Trees 8 to 16 Foot
Goliath
Product description
Goliath welded steel Christmas Tree Stand For Live Trees 8 to 16 Foot, 9 inch max Trunk size, 42 inch Leg Span, 1.8 gallon water capacity, 4 steel support screws with steel end caps, Powder Coated Steel, Lifetime Warranty. Tired of your Christmas Tree falling over and Breaking your priceless family Christmas Tree Ornaments? Don't settle for a weak undersized plastic Christmas Tree Stand. Buy a GOLIATH Christmas Tree Stand! Made from heavy duty powder coated steel and backed by a lifetime warranty, GOLIATH Tree Stands are truly the last Christmas Tree Stand you will every buy! BUY WITH CONFIDENCE: Goliath Products LLC is a USA-based family owned and operated business established 4 years ago after spending 15 years in the Christmas tree stand industry, we knew we could manufacture better, stronger, tree stands that will last a lifetime. Our friendly USA customer service staff will assist with product and parts questions, and you won’t have to search all over the internet or Amazon for help. Our customer service phone number, and email address is clearly printed on the retail carton and the instruction sheet.
- For Live Trees 8 to 16 Foot
- 9 inch max Trunk size, 42 inch Leg Span, Legs Remove for easy storage
- 1.8 gallon water capacity, 4 steel support screws with steel end caps
- Powder Coated Heavy Duty Steel
- Lifetime Warranty
User questions & answers
| Question: | Where is it made |
| Answer: | The one I received (which looks like the picture), doesn't have the red pop-up level indicator. It has lines inscribed on the inside of the reservoir itself (which can be difficult to see once you have a tree installed). I had to lay on my side and stick my finger in the reservoir to see how low the water was. Would have been nice if they would have carried over a more easily view-able visual indicator of water depth... |
| Question: | What size are the screws? (I need a replacement one |
| Answer: | We have had it for several years now, our first tree was over 13 feet. It is an amazing stand. |
| Question: | Will the tree stand handle a tree that is not straight |
| Answer: | There is no drainage hole. After you remove the tree you simply dump any remaining water into the sink or outside. I would not want any drainage hole. No chance for a leak. It is a GREAT tree stand. Very well made and sturdy. I had a swivel stand, and this one one if far superior. |
| Question: | Does it have a gauge to show how much water is in container |
| Answer: | These Branches are Super Strong and can hold most any Ornament ! |
Handythings Christmas Tree Stand, for Trees Up to 8-Feet, 1.3-Gallon Water Capacity
JACK-POST
Product description
This Jack-Post Christmas Tree Stand is a large capacity tree stand for trees up to 8-feet tall and up to 6-inch trunk diameter. Made of plastic, this tree stands holds 1-gallon of water (without the tree), has a spill-catcher edge and is 19.5-inches in diameter. Stabilizing spike. Eye-bolts thread steel nuts for strength and smooth operation. Corrosion resistant 'gold tone' zinc-dichromate hardware. Made to last! 5-year limited warranty.
- Medium, 5 Eye-Bolt, 1.3 Gal Tree Stand
- 8' Tree, 6" Trunk, 19" Base
- 5.5" Bare trunk needed, steel spike base plate
- Color label, master carton
User questions & answers
| Question: | people have complained about the nuts getting stuck in the tree when disassembling, and so it causes people to have to buy new nuts and bolts.Any info |
| Answer: | The nuts have gotten stuck in my trees, but I have always been able to get them off with my fingers or a pen or something. I have never had to replace a nut or bolt. |
| Question: | what are the overall dimensions of this stand? Need to know if my tree box will got around it |
| Answer: | The dimensions should be mentioned in the descriptor. It is very large, much larger than any tree stand I have had before. It is also quite tall. Consider that it holds a gallon and a half of water, and you should have an idea of the size. |
| Question: | What size do I need for a 5 foot treet |
| Answer: | i think that stand can accommodated your needs, |
| Question: | what is the smallest size trunk this will work with |
| Answer: | It doesn't matter. A smaller trunk means a smaller target to hit with all 5 of those bolts. Buy a $25 stand that will last 10 years instead. |
Tree Nest Rustic Christmas Tree Stand for Real Tree Up to 7.2 ft Sliver Tree Base Holder Christmas Decor Decoration Stand (Medium) (Silver)
Product description
The charm and simplicity of the Rustic Christmas tree stand is a perfect addition to any Christmas trimmings. This pastoral classic made from natural wood is suitable for real Christmas trees.
- ★ Wood Rustic style designed in Finland by Red Dot winner
- ★ Strong metal base and beech legs, durable, and easy to store
- ★ Holds a tree from 1.2 to 3.6" in diameter and up to 7.2' tall and 0.34 gal water to keep your tree fresh
- ★ Large bolts with comfortable handles make tightening screws easy
- ★ CLEAN physical pressure casting, no water leak, protect your carpet and floor from water
User questions & answers
| Question: | Is this one with a silver (galvanized)bowl or white metal. If white is it galvanized Metal |
| Answer: | The type of finishing is molding powder, not galvanized. |
| Question: | Will this tighten around a trunk with a diameter of 2.5 inches? I am not sure from the description if 3.9 is the maximum or minimum |
| Answer: | This stand trunk dia is up to 3.9 inch, so a tree dia less than 3.9 inch is all fit! |
| Question: | What are the silver caps for? The directions don’t say where they go |
| Answer: | They go onto the ends of the bolts. Prevents the bolts from digging into the tree. Install then after you thread the bolts into the stand. |
Star Live Christmas Tree Stand Made in USA, For Trees Up to 6 Feet (0.5 Gallon Water Capacity)
Product description
All you need to keep your tree secure this holiday is this Star Christmas Tree Stand by Jack-Post. Featuring 5 T-nut tipped eye-bolts thread through steel nuts for strength to keep your tree from falling, and a steel spike base plate for added stability. The stand is made of plastic while the “gold tone” hardware is made of corrosion resistant zinc-dichromate, in this way you can store and reuse the stand over again. It has spill catcher edge to avoid water from overflowing on your floor. Stand for trees up to 6 ft. tall can hold up to 0.5 gallon of water. For up to 8 ft. tall tree stand, it has 0.75 gallon water capacity. This tree stand's engineered design requires less bare trunk and eliminates additional trimming. This product is Made in USA and has a 5-year limited warranty.
- 5 T-nut tipped eye-bolts and steel end caps securely hold the tree, and steel spike base plate for added stability
- Stand is made of plastic while the “gold tone” hardware is made of corrosion resistant zinc-dichromate, in this way you can store and reuse the stand over again
- Stand for trees up to 6 ft. tall can hold up to 0.5 gallon of water; while for up to 8 ft.-tall-tree stand has 0.75 gallon water capacity
- Engineered design that requires less bare trunk and eliminates additional trimming; also features spill catcher edge to avoid water from overflowing on the floor
- Made in USA; with 5-year limited warranty
User questions & answers
| Question: | What size are the screws |
| Answer: | They are quarter inch eye screws with lock nuts. |
| Question: | what is the diameter of center of stand from smallest to largest for trunk size |
| Answer: | I could only find the dimensions of the base which is 16.5 inches. I am sorry that I could not be of further help to you. |
| Question: | What is the measurement of the base? (Maximum length in inches |
| Answer: | 16.5" |
Latest Reviews
View all
High Rated Washing Machine
- Updated: 06.07.2023
- Read reviews
Organic Lecithins
- Updated: 23.06.2023
- Read reviews
Avery Compact Laser Printers
- Updated: 26.01.2023
- Read reviews
Swimming Training For Kids
- Updated: 04.03.2023
- Read reviews
De Humidifier
- Updated: 27.01.2023
- Read reviews