Product description

Serve the thirstiest of crowds! Featuring a full size Black Stainless Steel 4. 9-Cubic foot capacity and a spring-loaded tap that makes dispensing easy. The included American Sankey "D" Keg coupler single-tap system and single meter regulator makes the beer flow with ease. Perfect for adding a unique element to backyard barbecues, Recreational rooms or the man Cave!

• LARGE CAPACITY: Spacious 4.9 cu. ft. capacity holds 1/6, 1/4 (short and slim) and 1/2 barrels of beer, accommodating for large parties, recreational rooms, bars, barbecues, mancaves and is garage ready!
• STYLISH DESIGN: The black stainless steel door gives it an elegant look and is featured with a hardtop pouring station, black tap tower, removable drip tray and chrome guardrail. Comes with two adjustable wire shelves for your favorite canned or bottle beverages
• RECESSED DOOR HANDLE: The recessed door handle provides a flushed finish with the door and the insulated rubber gasket inside keeps the cold in and the heat out
• EASY MOBILITY: Four casters at the bottom allow for the fridge to be easily transported from room to room and front casters can be locked to ensure the unit does not roll on hard floors
• POWERFUL COOLING SYSTEM: The adjustable thermostat has seven settings so you can keep it chilled to as low as 32 degrees, keeping a consistent temperature to keep your beer or other drinks ice cold
• SPRING-LOADED TAP: The 12-inch, black spring-loaded single tap tower allows for an easy pull and release dispense, pouring a consistent draft beer every time
• KEG COUPLER: Includes one American Sankey "D" single tap system that stands up to heavy use and is specially designed with a lever handle that makes it more sturdy and reliable than other standard styled keg couplers

User questions & answers

Question:	Is this thermal electric or compressor cooling system
Answer:	Compressor
Question:	does this model store the co2 cannister inside the refer or outside
Answer:	It straps to the inner wall, inside.
Question:	How many 1/6 Kegs or Corny Kegs can this hold
Answer:	Two
Question:	Can you use this outside
Answer:	no it's an indoor keigorator

Product description

Refreshing craft beer straight from your countertop tap! Bring 5-liters of your favorite craft brew right into your kitchen and keep it cold and fresh for 30+ days after tapping Fill the included 5-Liter keg growler or use any standard pressurized or non-pressurized mini keg An easy-pull tap handle makes dispensing easy while a removable drip tray catches any drips

• COMPATIBILITY Works with ALL standard 5-Liter pressurized and non-pressurized gravity kegs as well as the included reusable growler keg - perfect for hosting the big game or other small parties!
• STYLISH DESIGN The black stainless steel gives it an elegant look making it a good fit for any kitchen bar man cave basement or garage!
• FRESH BEER AT HOME Works with standard threaded CO2/N2O cartridges helping to keep beer fresh for 30+ days
• POWERFUL THERMOELECTRIC COOLING SYSTEM The LED adjustable temperature gauge ranges from 36 to 53 degrees and chills within 24 hours keeping drinks ice cold
• EASY DISPENSING The easy-tap handle allows for an easy pull and release dispense pouring a consistent draft beer every time
• REUSABLE GROWLER INCLUDED fill the reusable plastic clear 5-Liter growler keg with your favorite beer to keep it fresh for long
• QUIET OPERATION no is no compressor or vibration resulting in low noise

Product description

In 1993, Sunpentown International (SPT) was founded on the ideal of distributing well trusted appliance brands that offer innovation, value and quality.

• Accepts standard 5 liter kegs and 5L Heineken mini kegs
• CO2 pressure control; Three CO2 cartridges included
• Thermoelectric cooling technology
• LED temperature display; Adjustable temperature
• Stainless steel housing

User questions & answers

Question:	I'm wondering if a decorative pull handle can replace the black handle
Answer:	Hello Mr. Serrano Daza,Regarding our misting fan model SF-3314MD, the following link will take you to the page of our website that has the power usage information for this unit:http://www.sunpentown.com/sfdcinmifan.html This fan quite energy efficient. It uses such a low amount of power that we do not even have the per hour rating information.
Question:	Somebody know where can i find the o-ring for the co2? the one provide by spt are very expensive and with others stuff. thank you
Answer:	yes almost anything purchased in the united states can be shipped to the Philippines, but due to the clogged sea ports it would take 3-4 months by ship, or 15 -20 days by jet, air shipping average is 4.00 usd per pound. Find a friend that can ship through LBc
Question:	Are the CO2 cartridges 16 gm non threated
Answer:	SPT tank might be 1/3 of a gallon and can last most of the day before refilling. Tank is awkward to remove. The mister is dry will not soak the floor. Refill with RO water if you have well or spring water with high mineralization build up. Calcium will damage the misting mechanisms. JT
Question:	I'm assuming this has everything to tap a non pressurized keg
Answer:	ALL I CAN SAY IS THAT I HAVE HAD MINE ABOUT 4 YEARS AND IT IS STILL GOING STRONG. I ONLY USE IT IN THE SUMMER OUT HERE IN THE MIDDLE OF THE DESERT IN NEVADA. I KEEP A KIND OF HIGH SETTING ON THE THERMOSTAT, BUT WITH THE FAN BLOWING ON ME IT SURE MAKES A DIFFERENCE AND KEEPS THE ELECTRIC BILL LOWER . DON'T REMEMBER THE LENGTH OF THE WARRANTY, BUT PROBABLY ONE YEAR. YOU MAY BE ABLE TO CALL THE MANUFACTURER TO. GET THE DETAILED INFO,, BUT I LOVE MINE. HOPE THIS HELPED

Product features

SPT BD-0538 Mini Kegerator and Dispenser

This attractive countertop beer dispenser is perfect for home entertainment. Chills the beer within 19 to 21 hours and stores it at the optimum temperature of 36-39 degrees Fahrenheit.

Accepts standard 5L Kegs

Equipped with CO2 cartridge pressure system, this mini kegerator can keep your beer fresh and chilled up to 30 days. Accepts standard 5 liter kegs and 5L Heineken mini kegs (Heineken keg doesn't require CO2 cartridge.)

Specifications

Capacity: 5L kegs.

Input voltage: 110-120V / 60Hz.

Input power: 65W / 1A.

Power cord length: 4 ft.

Noise level: ≤38dB(A); (ambient noise ≤25dB(A)).

Temperature range : 36-53°F (2-12°C).

Unit Dimension: 10.71W x 16.3D x 16.93H in.

Package Dimension: 13 x 18 x 19 in.

Unit weight: 13.89 lbs.

Gross weight: 19 lbs.

Product description

NutriChef Model : PKBRTP100.5

NutriChef Pressurized Growler Tap System - Stainless Steel Mini Keg Dispenser Portable Kegerator Kit - Co2 Pressure Regulator Keeps Carbonation for Craft Beer, Draft and Homebrew - PKBRTP100.5 (128oz)

Features:

Compact & Portable Mini Keg System

Homebrew CO2 System Keeps Carbonated Beverages Fresh All Day

Includes All Necessary Installation Components & Hardware

Solid Stainless Steel Construction Keep Beverage Colder, Longer

Made of Food Grade S/S 304 Rust Proof Stainless Steel

Easy to Assemble - Easy to Fill - Easy to Clean

What’s in the Box:

Stainless Steel Keg

Brass Tap

Assembly Hardware

Neoprene Koozie

Technical Specs:

Keg Liquid Volume Capacity: 128 oz.

CO2 System: 30 PSI, Safety Pressure Regulated

Standard Threaded CO2 Cartridge Compatibility (Not included)

Construction Material: Food Grade 304 Stainless Steel

Total Assembled Height: 7.5’’ x 6.9’’ x 19.5’’ -inches

The NutriChef NutriChef Pressurized Growler Tap System - Stainless Steel Mini Keg Dispenser Portable Kegerator Kit - Co2 Pressure Regulator Keeps Carbonation for Craft Beer, Draft and Homebrew - PKBRTP100.5 (128oz) - Compact & Portable Mini Keg System - Homebrew CO2 System Keeps Carbonated Beverages Fresh All Day - Includes All Necessary Installation Components & Hardware - Solid Stainless Steel Construction Keep Beverage Colder, Longer - Made of Food Grade S/S 304 Rust Proof Stainless Steel - Easy to Assemble - Easy to Fill - Easy to Clean - What’s in the Box: - Stainless Steel Keg - Brass Tap - Assembly Hardware - Technical Specs: - Keg Liquid Volume Capacity: 128 oz. - CO2 System: 30 PSI, Safety Pressure Regulated - Standard Threaded CO2 Cartridge Compatibility (Not included) - Construction Material: Food Grade 304 Stainless Steel - Total Assembled Height: 7.5’’ x 6.9’’ x 19.5’’ -inches.

• NEVER FLAT CRAFT BEER: A traditional growler will let beer go flat after the first pour. PKBRTP100 will keep beer vacuum pressured and fresh for up to 2 months. Perfect for any homebrew or craft draught beer kegging equipment enthusiast
• WORKS W/ DISPOSABLE CO2: Not included - Each cartridge will pump around 128oz of beer before depleting Co2 cartridge. Screw universal threaded 16g CO2 gas cartridges (any brand) into the regulator to supply pressurized carbonation to your keg system
• UPGRADED ADJUSTABLE REGULATOR: Monitor the mini keg growler’s current PSI from the regulator gauge and fine tune pressure by rotating the adjustment knob to enjoy a perfect head on every beer. Add the insulator sleeve to keep beer cold
• HEAVY DUTY STAINLESS STEEL: Each of the accessories in the tap dispenser kit is constructed with S/S 304 stainless steel. Tap faucet handle is just pouring draft brew from a kegerator. Pressure release valve allows safe removal of the tap hardware
• 128oz TANK SIZE: Barrel is the same volume as traditional growlers and is laser marked at the fill level. Includes metal screw on lid for easy portable transportation and storage. Fits in your home fridge

User questions & answers

Question:	can the co2 regulator be connected to a co2 tank
Answer:	You need a proper regulator ON the tank to step down the pressure. The little regulator on the growler head is very light duty.
Question:	Can you use a larger CO2 tank
Answer:	That is what I am doing using a 5Kg Co2 tank
Question:	Can you buy a 128 oz. extra growler with a cap and not the other parts
Answer:	We can only provide the available part/s for this unit. We have dedicated tech support call center that would love to help you troubleshoot your issue. Please contact 718-535-1800 press 2 for customer service and then 1 for tech support Monday to Thursday 9 am to 5 pm EST.
Question:	Can this minikeg dispense carbonated beer from a horizontal position - say if stored on a refrigerator, or other, shelf
Answer:	It probably would if you cut the tubing a little bit longer and made sure that it was laying at the bottom of the keg when you place it in the refrigerator.

Product features

NutriChef Pressurized Growler Tap System

Capping the night off with a flavorful, craft-brewed beer just got easy with Nutrichef. Portable & easy to assemble, this growler is set to quench your thirst night in & night out. Get one and experience Nutrichef!

• Stores up to a full sized half shell Sankey standard keg or two sixth kegs; does NOT support use of Coors, Miller rubberized or other oversized kegs
• Temperatures: Low 30s to mid 40s degrees; rolling casters included for easy mobility; Protective floor plate
• For freestanding use only and indoor use only; 5 lb. CO2 cylinder (supplied empty) included with external or internal mounting capabilities
• Dimensions: 50-7/16" H (includes tap & casters) x 20-3/16" W x 20-1/16" D (Depth w/ external tank mounted: 30-1/2") (Height w/out tap and casters: 33-1/8"); Warranty 90 days labor 1 year parts
• For a black version please see model KC2000TWIN, for a single tap KC2000SSA, single tap in black KC2000

User questions & answers

Question:	Hi, will this hold 2 Cornelious Kegs
Answer:	I am not familiar with those type of kegs. It does hold two 1/6 barrels.
Question:	Is this an outdoor kegerator
Answer:	We had ours for 6 years on a covered porch with hot and humid Florida weather... it just died and I’m buying the same one... can’t beat the price... not sure an expensive outdoor keg would last any longer
Question:	Just bought the stainless version of this kegerator - what is the loose metal plate that came with it inside
Answer:	the metal plate goes on the bottom of the fridge for the keg(s) to sit on. It helps distribute the weight of the keg(s). The instructions that come with the kegerator are not that good, so I used the videos on the Edgestar web site to help me set it up:http://www.edgestar.com/Edgestar-Kegerators-Support-Videos,-Manuals-Guides/SUPPORT_KEGERATORS,default,pg.htmlhope this helps
Question:	Is this for brewing your own beer and not just dispensing beer
Answer:	You would need to purchase additional fittings depending on what kind of kegs you are using to put your beer in. This come with a "D" coupler which fits most standard North American beers, but for home brewing you would use a ball lock or pin lock keg and then would need a ball lock or pin lock conversion kit instead of a D coupler to attach the hoses to the keg.

Product features

EdgeStar KC2000SSTWIN Stainless Steel Ultra Low Temp Full Size Dual Tap Kegerator & Draft Beer Dispenser - Part of the KC2000 Family

Set up a home or commercial brewing system to serve cold draft beer using the EdgeStar Ultra Low Temperature Full Size Kegerator & Keg Beer Cooler (KC2000SSTWIN). EdgeStar full size kegerators are capable of reaching temperatures in the low 30s, making them the coldest of any kegerators on the market. Ideal for seasoned beer enthusiasts looking for a reliable kegerator before spending a fortune on a commercial unit, or people who are just starting out. The EdgeStar full size kegerator is an excellent value, combining a designed-to-fit refrigerator with commercial-grade, NSF-approved beer and air lines.



Specifications:

• Temperatures: Low 30s to mid 40s degrees F
• Easy refrigerator conversion
• Two piece drip tray
• Chrome safety rail and tower
• Protective floor plate
• Rolling casters for easy mobility
• Reversible door
• Input voltage: 115 V/60 Hz
• Power: 105 W/1.5 A
• Weight: 81.6 lbs
• Internal Dimensions: 28" H x 16 3/4" W x 15 1/2" D
• External Dimensions (with draft tower): 48 1/2" H x 20 1/10" W x 24 13/16" D

Beer Components Included

Keg Configurations

Features

Able to maintain ultra low temperatures, the thermostat on the Edgestar KC2000 can reach into the low 30's.

Product description

Set up a home or commercial brewing system to serve cold draft beer using the EdgeStar Ultra Low Temperature Full Size Kegerator & Keg Beer Cooler (KC2000SS). EdgeStar full size kegerators are capable of reaching temperatures in the low 30s, making them the coldest of any kegerators on the market. Ideal for seasoned beer enthusiasts looking for a reliable kegerator before spending a fortune on a commercial unit, or people who are just starting out. The EdgeStar full size kegerator is an excellent value, combining a designed-to-fit refrigerator with commercial-grade, NSF-approved beer and air lines. All the beer components are high-quality parts that include a Domestic "D" coupler, CO2 regulator, stainless steel draft tower with faucet, beer and gas line and a new aluminum CO2 tank (empty). External Dimensions (with draft tower): 48 1/2" H x 20 1/10" W x 24 13/16" D; Warranty: 1 year parts; 90 days labor; Power: 105 W/1.5 A; input voltage: 115 V/60 Hz.

• Holds US Standard 1/4 and 1/2 Kegs. Does NOT support use of Coors, Miller, rubberized or other oversized kegs
• Temp Range: Low 30's to Mid 40's; Easy conversion to a refrigerator; 5 lbs CO2 cylinder included (supplied empty)
• Dimensions: 50-7/16" H (includes tap & casters) x 20-3/16" W x 20-1/16" D (Depth w/ external tank mounted: 30-1/2") (Height w/out tap and casters: 33-1/8")
• For freestanding use only, Casters included for easy mobility, Drip tray catches spills to contain drips and messes
• For a black version please see model# KC2000, for a dual tap see KC2000SSTWIN, and dual tap black KC2000TWIN

User questions & answers

Question:	Does the hardware with the tube and pressure gauge contain lead or is it only the Co2 tank that contains led
Answer:	You would have to contact Amazon or the manufacturer for that one.
Question:	What sizes does this hold
Answer:	Buy a decent quality tap, not this make which is crap
Question:	Is there lead only on the canister or on The pressure gauge and hard where as well
Answer:	I'm not sure but I drilled a hole as close as possible and mine works great!!!
Question:	After pouring the tap drips for a while. Why
Answer:	This doesnt convert what you have as much as replace. If you have a 3" hole in your refrigerator then this will replace the tower that you have.

• Holds US Standard 1/4 and 1/2 Kegs. Does NOT support use of Coors, Miller, rubberized or other oversized kegs
• Temp Range: Low 30's to Mid 40's; Easy conversion to a refrigerator; 5 lbs CO2 cylinder included (supplied empty)
• Dimensions: 50-7/16" H (includes tap & casters) x 20-3/16" W x 20-1/16" D (Depth w/ external tank mounted: 30-1/2") (Height w/out tap and casters: 33-1/8"), Warranty: 90 days labor, 1 year parts
• For freestanding use only, Casters included for easy mobility, Drip tray catches spills to contain drips and messes
• For a stainless steel version please see model# KC2000SSA, for a dual tap see KC2000TWIN, and dual tap stainless KC2000SSTWIN

User questions & answers

Question:	Can I use this unit out side
Answer:	It is decently loud. We also unplug it when not in use. I would say it is louder than our fridge. Buuuuuuut, my husband loves the cold beer, so it is all worth it! lol
Question:	Will it hold two new style corny kegs
Answer:	It took a few hours. I made sure the beer was cold before I put it in the machine.
Question:	how long does beer stay fresh? how often do you have to change CO2 and where do you buy those? do smaller kegs stay fresh longer? how/when do u clean
Answer:	I think you will find many things can be put in the machine.
Question:	Should I turn off the keg coupler and co2 when Im away
Answer:	Most likely. You really need to pre-chill mini keg in regular household refrigerator before using. Also add cold water to unit. It is designed to keep beer cold not necessarily chill a warm mini keg.

Product features

EdgeStar KC2000 Ultra Low Temp Full Size Kegerator & Keg Beer Cooler - A Part of the EdgeStar KC2000 Family

Set up a home or commercial brewing system to serve cold draft beer using the EdgeStar Ultra Low Temperature Full Size Kegerator & Keg Beer Cooler (KC2000). EdgeStar full size kegerators are capable of reaching temperatures in the low 30s, making them the coldest of any kegerators on the market. Ideal for seasoned beer enthusiasts looking for a reliable kegerator before spending a fortune on a commercial unit, or people who are just starting out. The EdgeStar full size kegerator is an excellent value, combining a designed-to-fit refrigerator with commercial-grade, NSF-approved beer and air lines.



Specifications:

• Temp Range: Low 30's to Mid 40's
• Included casters for easy mobility
• Protective metal floor plate for added durability
• Two piece drip tray
• 1/2 barrel keg size allowed: 16 1/8"
• Reversible door
• Chrome safety rail
• Input voltage: 115 V/60 Hz
• Power: 105 W/1.5 A
• Weight: 81.6 lbs
• Internal Dimensions: 28" H x 16 3/4" W x 15 1/2" D
• External Dimensions (w/ draft tower): 48 1/2" H x 20 1/10" W x 24 13/16" D

Beer Components Included

Keg Configurations

Features

Able to maintain ultra low temperatures, the thermostat on the Edgestar KC2000 can reach into the low 30's.

Product description

The same great Kegco Kegerator that you know and love - now specially designed for home brewers! This HBK309S-2 Double Faucet Home-Brew Kegerator features the same attractive styling, digital functionality, and convenient drip tray, guard rail, and casters as our K309 draft beer dispensers, as well as a complete two-tap homebrew dispense system that allows you to tap two Cornelius ball lock kegs at a time. The home-brew dispense system includes a two-faucet stainless steel draft tower, premium two-product double gauge regulator, and glossy red 5 lb. aluminum CO2 cylinder.

• Features a reversible door | removable guardrail | Includes Keg dispenser / Gas and Beer lines / Co2 tank (ships empty) / & regulator
• Product dimensions – 25” D x 24” W x 33.25” H | Electrical – 115V / 60 Hz / 1.7 running amps | Fits barrels – One full size (1/2) / One Pony size (1/4) / One slim (1/4) / Two 1/6 or Three 5 gallon ball / pin lock Keg
• Recommended clearance around the unit – 3” on all sides | Do not expose outdoor | Temperature range – 32ᵒ to 75ᵒ
• Store up to three Cornelius ball lock kegs in the HBK309S-2's spacious interior, or use it to hold a 6 gallon bucket or carboy of fermenting homebrew. This keg refrigerator can even be used to store food and other beverages!
• With a digital LED display and intuitive controls, it is easy to set and verify the internal temperature of this home brew keg refrigerator | Simply press the up or down button, and the temperature is adjusted by one degree in Fahrenheit or Celsius

User questions & answers

Question:	Are these for cold coffee too
Answer:	No
Question:	Aside from the ball-lock kegs, is *everything* included with this kegerator? All fittings and hose lines
Answer:	This Kegco Home Brew Beer Kegerator features Kegco's Exclusive Homebrew Kegerator Kit, which comes with everything you'll need to dispense ball lock home brew kegs, this includes Gas and Beer Lines, Co2 tank (ships empty), and Regulator. -Beverage Factory Customer Service
Question:	Does it have a reversible door
Answer:	Hello, Thank you for your question. Yes the door is reversible. Thank you, Beverage Factory
Question:	Is the guardrail removable if I’m storing the unit underneath a bar and running the tower up through the bar top
Answer:	Hello, Thank you for your question. The guardrail simply pops into place so it can be removed. Please be advised however this unit is not meant for a built in application and will need at least 3" of clearance on all sides. Best Wishes Kaylyn Beverage Factory

Product features

Digital Temperature Control

You no longer have to guess what temperature a number on a dial will produce. Simply press the up or down button to adjust the temperature by one degree. The display can be set to either Fahrenheit or Celsius.

Fan-Forced Cooling for Super Cool Temperatures

Kegco HBK309 Homebrew Kegerators have one of the coldest temperature ranges of any keg dispenser on the market today thanks to fan-forced cooling, which provides even cooling throughout the unit.

Widest Temperature Range

This beer dispenser boasts the widest temperature range on the market, which can be set as low as 32 degrees for ice cold beer or as high as 75 for use as a fermentation chamber when home-brewing your own beer.

Large Interior

This homebrew kegerator has a spacious interior that can hold up to three 5 gallon Cornelius ball lock home brew kegs, up to two 5 gallon D system kegs, or any full size keg for added versatility.

Exclusive Kegco Homebrew Kegerator Kit

This Kegco Home Brew Beer Kegerator features Kegco's Exclusive Homebrew Kegerator Kit, which comes with everything you'll need to dispense ball lock home brew kegs. The dual tap draft dispense system includes premium components like a polished stainless steel Kegco draft tower with two faucets, two complete ball lock home brew keg tap sets, a Kegco YH-762-2 Two Product Commercial-Grade Double Gauge Regulator, and a 5 lb. aluminum Kegco CO2 Tank with glossy red epoxy finish. It also includes beer and air line, clamps, a faucet wrench.

Kegco 3" Diameter Polished Stainless Steel Dual Faucet Draft Tower with Chrome Faucets

This tower is a commercial grade single column, dual faucet, 3" diameter stainless steel draft tower. It comes complete with two chrome plated faucets with brass levers and two 5 foot lengths of 3/16" I.D. clear beer tubing. The tower is mounted using the gasket and four screws that are included.

Kegco 762-2 Commercial Grade Dual Gauge Two Product Regulator

Kegco's 762-2 Double Gauge Two Product Commercial Grade Regulator ensures peak performance in demanding commercial environments. It features a T-style adjustment valve that makes it easier than ever to adjust the keg pressure when the regulator is cold. This two product regulator features a Y-splitter for applications where two kegs will be dispensed at the same keg pressure, and has two independent shut-off valves. A gauge on the top indicates how much CO2 pressure is inside of the keg while a gauge on the side indicates the volume of CO2 gas remaining in the tank.

Two Complete Ball Lock Home Brew Keg Tap Sets

These complete ball lock home brew keg tap sets include both gas in and beer out couplers for easy tapping of ball lock Cornelius Pepsi kegs. The gas in has a 1/4" nut and 5/16" hose barb already attached for easy connection to the air line. The beer out connector has a 3/16" hose barb that connects to the 3/16" beer line.

Kegco B5-RED Empty 5 lb. Aluminum CO2 Tank with Electric Red Epoxy Finish

This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. It features an eye-catching powder coated epoxy finish in Electric Red that acts as an extra layer of protection against corrosion and wear. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada markings. The tanks have a male thread CGA320 valve for CO2 regulators. An average fill is good for 5-6 kegs.

Product description

Quality meets portability with our 1 tap 30 quart jockey box. Also known around our warehouse as 'the tailgater. ' You'll be the hit of the party when everyone is pouring their own beer from a tap. It's easy to hook up, pours ice cold beer, and easy to clean. Bring it anywhere draft beer is required (parties, camping, football games, etc. ) and all night long people will be asking you, 'where did you get that thing?' Rear Inputs: The beverage line coming from your keg connects to this jockey box on the back of the cooler. This leaves a clean look on the pouring side (faucet). Benefits: All stainless steel construction Deep direct coil to shank assembly to prevent blowouts. 50' x 5/16" SS coil holds over a pint of beer Designed by industry professionals Every jockey box is hand built in Michigan by COLDBREAK and backed by our Includes: 50' Stainless steel coil Stainless steel shanks Stainless steel faucet with black tap handle Dimensions: 18L x 12W x 17H

• 1 tap, stainless steel shanks
• Includes stainless steel faucet with black tap handle
• 50-Foot stainless steel coil (5/16-inch od)
• Marine grade cooler designed to withstand harsh, wet environments
• Does not include dispensing kit (sold separately)
• Included components: Jockey box, stainless steel faucets, black tap handles

User questions & answers

Question:	how many cold pints can you get out of it in one shot before it starts getting warm
Answer:	A 50' coil holds just over a pint of beer. As the beer enters the jockey box it starts cooling immediately. So by the time it gets to the tap, its at serving temperature. You'll always have a full pint ready to pour. See our video for more info. https://www.coldbreakbrewing.com/blogs/jockey-box-info/18583273-jockey-box-temperature-testing
Question:	Can I use this for kombucha
Answer:	Absolutely. You can use it for any beverage that is kegged.
Question:	coil is included
Answer:	Yes, you will need the beer line, air line, keg coupler and the manifold and gauges that hook to the tank.
Question:	Do you need a CO2 tank with this
Answer:	Yes, this is just the jockey box and faucet. For a complete kit, add the 1 tap dispensing kit and a CO2 tank. A 5 lb tank is the perfect size. Dispensing kit https://www.amazon.com/Coldbreak-Brewing-Equipment-CBSSDK1-Dispensing/dp/B0747XG5WB/ref=sr_1_8?ie=UTF8&qid=1528289969&sr=8-8&keywords=dispensing+kit CO2 tank https://www.amazon.com/Coldbreak-Brewing-Equipment-CB5LBTANK-Aluminum/dp/B076JGDZJP/ref=sr_1_10?ie=UTF8&qid=1528290184&sr=8-10&keywords=co2+tank+5+lb

Product features

What is a Jockey Box?

In its simplest terms, a jockey box is a portable draft system for dispensing your beverage of choice, pressurized by CO2. Chances are, you’ve seen one in use at a festival or outdoor event.

These are not the hand-pump taps you rented for house parties in college. Those force oxygen into your kegs, which speeds the process of oxidation, resulting in stale, off-flavors and aromas. It also usually causes mass frustration by overflowing your guests’ plastic cups with foam. Not fun. So, if you’re still using one, stop reading this right now and go throw it away.

Good, you’re back and still with us!

How It Works

Jockey boxes are generally constructed from insulated coolers, modified to accommodate the essential components required to transform them into sophisticated and reliable mobile draft units.

The key ingredients are our coils, shank plates, and faucets, all made from food-grade stainless steel. Whether you choose one of our 4-Tap, 2-Tap, or 1-Tap editions from our product lineup, as your beverage leaves its keg it circulates through 50’ of coil per draft line.

To answer a common question, no-jockey boxes don’t require electricity, batteries, or even WiFi. Just a CO2 tank and ice. This makes them convenient for indoor and outdoor use.

Cooling the coils by filling the jockey box with ice is what keeps your beverage cold while CO2 pressurizes the keg, pushing your beverage to flow through them. Faucets installed to the front of the jockey box dispense the beverage.

Jockey Box

Setting up and using jockey box can seem intimidating at first, but rest assured it's not that complicated once you break it down into its components:

1. A jockey box
2. Dispensing kit
3. A 5 lb CO2 tank

While our jockey boxes are available in a variety of styles, the internal components we use to manufacture them are all the same. The model shown below may be different than the one you purchased.

Dispensing Kit

Dispensing kits come with everything you need to hook your jockey box up to American kegs (except a CO2 tank).

American Sankey 'D' couplers will connect to any standard American beer keg (Bud, Coors, Local Craft Beer, etc.)

CO2 Tank

A 5 LB CO2 tank is recommended for most pouring scenarios. Federal law prohibits shipping full tanks. Most Homebrew shops, Restaurant suppliers, Welding suppliers, Hydroponics stores, or gas companies will fill or exchange a tank for a small fee.

Product description

Whether you are a beer drinker or an avid entertainer you will be the best party host with this ultimate indoor freestanding kegerator by Danby Appliances. This dual tap keg cooler is an exceptional addition to any wet bar, game room or man cave and provides the convenience of two different cold beers on tap at once. It uses R600A refrigerant and has an automatic-defrosting system which makes for an excellent product with hassle-free maintenance. This keg cooler includes a single gauge regulator, CO2 tank and all required hardware. It has a precise mechanical-thermostat to keep your beer cold and a spotless-steel finish resembling stainless-steel but much easier to clean. Did we mention it has a scratch-resistant worktop? Furthermore, this unit includes an American Sankey coupler, a chrome guard rail and drip tray, and optional swivel castors for easy portability. The door hinge is reversible which allows you to adjust it for either left or right-handed opening.

• This Danby Dual-Tap Kegerator is the ideal kegerator to keep your favorite beverage on tap
• 5.4 Cubic Feet (153 Liters) Capacity: This kegerator fridge has a spacious capacity of 5.4 cu. ft.
• Clean Bright and Modern: Spotless steel finish that looks identical to real stainless steel, but without the smudging
• Great Design: Chrome guard rail, drip tray and free standing, indoor application
• Versatile: Scratch resistant worktop, reversible door hinge for left or right-hand opening and optional swivel castors for easy portability
• Easy Set Up: This keg cooler includes a single gauge regulator, CO2 tank and all required hardware
• Easy to Operate: Mechanical temperature control and automation defrost for hassle-free maintenance
• Environment Friendly: A beer kegerator that uses environment friendly R600a refrigerant

User questions & answers

Question:	Will 2 cornelius kegs fit in this unit
Answer:	Hello Dawn, Thank you for your question. I have reviewed the info provided by the manufacturer, it does not specifically say anything about a Cornelius kegs. However, it does state it will hold 1 full size keg. It will also accommodate the following sizes. This keg cooler will accommodate the following: 1/6 barrel: Can chill and dispense 2 simultaneously 1/8 barrel: Can chill and dispense 2 simultaneously 1 full size keg (1/2 barrel) 1 straight pony keg (1/4 barrel) I Hope this answers your question. Thank you again for your question. Sincerely Jim Appliance Oasis
Question:	Does the depth of 24 inches account for the tank or is the depth deeper than 24 inches
Answer:	Hello, Thank you for your question. The 24 inch depth does not account for the CO2 tank on the back of the unit. The tank and regulator system adds approximately 10 inches to the overall depth. Regards Ann
Question:	What is the circumstance of the beer tower would like to replace it with at chrome tower
Answer:	Hello, It is a 3 inch tower. Regards Ann
Question:	How long are the air hoses for the air tank? Are they long enough to place the air tank in a cabinet next to the kegerator
Answer:	Possibly, as long as the cabinet is on the backside of the kegerator. You could also purchase longer air tubes from an ACE Hardware or Northern Brewer type business.

Product description

"This K199SS-1 Full-Size Single Tap Draft Beer Dispenser includes everything you need to dispense fresh draft beer straight from a keg. It has a complete Direct Draw Keg Tap Kit that is compatible with most of your favorite D System Domestic Beer Kegs, and features a 15"" Chrome-Plated Metal Draft Tower with One Faucet, a Sankey Keg Coupler, and an aluminum 5 lb. Co2 Cylinder and Single Gauge Regulator. Additional features such as a Removable Drip Tray, a Textured Serving Counter-top with Metal Safety Rail, and a Steel Interior Floor Mat help provide impressive performance at a great value!



As well as dispensing draft beer, these kegerators can also be used as wine keg and coffee keg dispensers with a few minor upgrades. The Kegco K199SS-1 has a stylish black cabinet and stainless steel door design that will fit in with any decor, and two Removable Wire Shelves are included to allow you to easily convert the kegerator into an all refrigerator or beverage center.



These Keg Coolers will hold a Full-Size, Straight Pony, or Quarter Slim Keg, or up to two Sixth Slim, Strap Handle, or Rubber Home Brew Kegs. They will not fit Bevel or Rubber Kegs, which are wider in the middle than at the top or the bottom. These kegs are commonly used by Coors and Miller Brewing Companies."

• INCLUDES COMPLETE KEG TAPPING KIT: This kegerator comes complete with all of the draft beer equipment you'll need to pour fresh draft beer straight from a keg, including a lightweight 5 lb. aluminum CO2 tank, a double gauge CO2 regulator, a sankey keg coupler that is designed to fit most of your favorite domestic beer kegs, and a single faucet draft beer tower that will impress any beer aficionado. The CO2 cylinder ships empty and will need to be filled locally.
• LARGE INTERIOR: This keg cooler will hold one full size, straight pony, or quarter slim keg and up to two sixth slim, strap handle, or rubber home brew kegs (it will not fit Bevel or Rubber kegs that are wider in the middle than at the top or bottom). It comes complete with two removable wire shelves that allow you to easily convert it into an all-refrigerator or beverage center whenever you need extra refrigerated storage for food and beverages.
• SLEEK AND STYLISH DESIGN: This beer cooler houses your kegs in an all black cabinet with an elegant stainless steel door. 2-1/2" casters allow you to move it to any room in your home from the kitchen to the home bar to the patio, so you can serve your favorite draft beer with style and ease from any place in your home. Additional features include a removable drip tray to collect spills, a textured serving countertop, and an attractive metal safety rail to keep glasses from sliding off.
• POWERFUL AND ENERGY EFFICIENT COOLING TECHNOLOGY: This UL listed draft beer dispenser has been specially designed for in home use and is both quiet and 25% more energy efficient, making it one of the best kegerators on the market for in-home keg storage. A manual temperature dial conveniently located inside of the cabinet allows you to adjust the internal temperature between 34-45 degrees Fahrenheit, giving you the power to serve your beer at it's ideal temperature.
• LONG-LASTING DURABILITY: Kegco kegerators are designed and constructed using high-quality materials for superior long-lasting performance, so you'll be enjoying cold draft beer from your new kegerator for a long time to come. This beer cooler features a steel interior floor mat that evenly distributes the weight of your kegs to help prevent damage over time, and allows your kegs to glide smoothly in and out when loading and unloading. Unit measures 33' H x 20" W x 25.5" D.

User questions & answers

Question:	If this is a san diego company why has it taken over a month and a week to receive it in san diego county. guess false advertising
Answer:	It took almost a month and half to get mine and it was missing parts when I finally did get it!
Question:	Is there a conversion kit for ball lock corny keg
Answer:	Not included but you can buy it separately.
Question:	What does the co2 tank normally get filled to
Answer:	Once your 5lb CO2 tank is filled you can dispense 2-4 kegs. Thank you, Beverage Factory Customer Service
Question:	This doesn't appear to be on castors. Seems like it would be a pain to pull it out to reach CO2 tank in rear of unit. Is that correct
Answer:	It does come with casters but we chose not to use them so we could fit the unit under our counter . The unit itself if very light and will likely only need the CO2 refilled every 9 months or so.

Product features

Convenient Design Features

Kegco's K199 Series features a removable drip tray with a dishwasher-safe plastic grill, an attractive and easy-to-install chrome safety rail, and locking casters that make it easy to move the unit from room to room.

Large Interior

This kegerator has a spacious interior that is large enough to hold one full size (15.5 gallon), pony (7.75 gallon), or quarter slim (7.75 gallon) keg, or up to two 5 gallon D system or home brew kegs. Please Note: this kegerator does not fit bevel or rubber kegs that are wider in the middle than at the top or bottom, like Coors and Miller kegs.

Converts to a Refrigerator

Two adjustable wire shelves are included, allowing you to convert the keg refrigerator into a regular all-refrigerator when you need extra refrigerated storage space for food and other beverages.

External Tank Mount with Knockout

Save space inside the cabinet by mounting the tank and regulator on the back of the unit. A knockout allows you to use a single product regulator outside of the kegerator, so you can adjust the pressure without opening the door.

Premium Keg Tapping Kit

This keg beer cooler is equipped with all of the components you need to dispense D system domestic kegs. The 3" diameter polished stainless steel draft tower is fitted with a 5 foot beer line, a chrome standard beer faucet, and a black faucet knob. The D system keg coupler features a stainless steel probe and is suitable for commercial use. The dual gauge CO2 regulator measures your output pressure and also lets you know when your tank is getting low on gas. The 5 lb. aluminum CO2 tank* has a glossy electric red epoxy finish that helps protect against corrosion and wear.

*The tank is shipped empty and must be filled locally.

Kegco 3" Diameter Polished Stainless Steel Single Faucet Draft Tower with Chrome Faucet

This tower is a commercial grade single column, single faucet, 3" diameter polished stainless steel draft tower. It comes complete with a chrome plated faucet with brass lever and 5 feet of 3/16" I.D. clear beer tubing that ends in a nozzle and hex nut assembly that connects to all standard keg couplers. The tower is mounted using the gasket and four screws that are included.

One Kegco KT85D-L 'D' System Lever Handle Keg Coupler

This easy-to-use Kegco KT85D-L Lever Handle Keg Coupler works with all domestic brand American 'D' system Sankey kegs. It features a 55-psi pressure relief valve, a nickel-plated forged brass body, and a sanitary stainless steel probe. To tap a keg, simply pull out and then down on the lever handle.

Kegco YH-762 Commercial Grade Double Gauge Regulator

Kegco's 762 Dual Gauge Commercial Grade Regulator delivers reliable peak performance even in demanding commercial environments. It has been durably constructed for a consistent flow pour after pour, and features a T-style adjustment valve that makes it easy to adjust the keg pressure when the regulator is cold. The gauge on top of the regulator indicates how much CO2 pressure is inside of the keg, while the gauge on the side indicates the volume of CO2 gas left in the cylinder. This regulator has a pressure release valve conveniently located on the regulator body.

Kegco B5-RED Empty 5 lb. Aluminum CO2 Tank wiht Electric Red Epoxy Finish

This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. It features an eye-catching powder coated epoxy finish in Electric Red that acts as an extra layer of protection against corrosion and wear. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada markings. The 320 valves are CGA approved and have a male thread for CO2 regulators. An average fill is good for 5-6 kegs.

Product description

Serve up cold draft beer in the comfort of your own home using the EdgeStar Full Size Triple Tap Built-In Outdoor Kegerator (KC7000SSODTRIP). Built-In Capable: This kegerator can be undercounter built-in or used in a freestanding application Outdoor Approved: This kegerator refrigerator is approved for use in your outdoor kitchen, bar, or garage Forced Air Refrigeration System: Due to a powerful forced air refrigeration system, cold air is evenly distributed throughout the kegerator to maintain your desired temperature, eliminating possible hot spots and guaranteeing the perfect pour with every dispense Ice Cold Beer: You'll be able to keep your kegs as cold as you please using the integrated thermostat that goes as low as 32 °F Air-Cooled Beer Tower: Cold air is directed up to and throughout the beer tower, preventing lost beer from a foaming first pour and ensuring that your brew stays cold from keg to glass Premium Draft Components: 5 lb. Luxfer CO2 tank, dual-gauge regulator, D Sankey couplers, NSF PVC beer lines, red CO2 lines, stainless steel triple tap beer tower, 304 stainless steel faucets, & black tap handles Durable Construction: The heavy-duty door, entire cabinet, and professional towel bar handle are fully wrapped in sturdy stainless steel Included Kegerator Accessories: Your kegerator will arrive with a stainless steel top cover, drip tray, guard rail, and four casters Electronic Control Panel: All of your unit settings are easily adjusted using the electronic control panel with push buttons and digital temperature display LED Lighting: LED interior lighting illuminates your keg and components while consuming less energy and not emitting any heat, so the temperature of your kegs will remain uncompromised Reversible Door w/ Lock: You have the option of reversing the door swing if you happen to prefer a certain direction or would like the unit to follow the flow of your cabinetry

• PLEASE NOTE: Part number BR7000SSOD will be shown on the retail box and all needed items that comprise the KC7000SSODTRIP will be included within this same box; Outdoor approved; Front ventilation; Air-cooled beer tower; Professional handle; Safety lock
• Adjustable thermostat; Interior LED lighting; Reversible door; Four casters included
• Drip tray, guard rail, & stainless steel top cover included; Stainless steel cabinet and door; Reinforced stainless steel floor; Draft components included
• Temperature range: 32 - 60ºF; Possible keg configurations: 1 full size keg, 1 oversized beveled edge keg, 1 quarter keg, 1 slim quarter keg, up to 3 sixth barrel kegs, up to 3 Cornelius kegs, 1 slim quarter w/ 1 sixth barrel keg, 1 slim quarter w/ 1 Cornelius keg
• PLEASE NOTE: Delivery will be curbside, inside delivery is not available. A valid phone number is required for delivery purposes, please ensure the correct phone number is provided in your shipping information when placing this order.

User questions & answers

Question:	How long before the beer starts to go flat
Answer:	As long as you have a CO2 cannister attached, it won’t go flat.
Question:	How tall is the unit without the casters attached? And is the rail removable
Answer:	Without the casters this unit would be 34-3/8" tall. The rail is also removable.
Question:	How high does the kegerator sit with the casters? Thanks
Answer:	From floor to top of cooler is 37.5" high To top of rail is 40.5"To the top of the tap is approx 55.5"All measurements are with castersHope this helps!
Question:	How do you install in an outdoor kitchen
Answer:	Since this unit vents from the front, it can be installed under counter, flush with your cabinetry, for a seamless look in your kitchen or bar area.

Product description

Bring the fun of a brewery tasting room into the comfort of your own home by dispensing your homebrew from Kegco's HBK209S-2 Dual Faucet Home-Brew Kegerator! Thanks to this kegerator's two-faucet design and large interior, you can easily dispense from up to two ball lock home brew kegs at a time while keeping a third perfectly cooled. When you share your home brew straight from the tap, your guests will get a richer tasting experience than they would from drinking out of a regular bottle, allowing them to observe your brew's hue and clarity, appreciate it's brewery-fresh taste and aroma, and enjoy the perfect temperature and effervescence. Kegco has included a specially designed two-product direct draw kit with this homebrew kegerator, so all you'll need to add is the CO2 gas and the kegs of beer. The complete kit comes with upgrades like a polished stainless steel two-faucet draft tower, CO2 cylinder with corrosion-resistant red coating, and premium double gauge regulator. For ease of serving, the HBK209S-2 features a textured top surface and a guard rail that helps prevent your mugs and glasses from sliding off, as well as a dishwasher-safe drip tray that catches drips and spills and can be thrown into the dishwasher for hassle-free cleaning. The four locking casters make it easy to move this kegerator from the kitchen to the dining room to the patio, so you can offer your guests delicious home brew no matter where in the house they are. The keg cooler features a stainless steel plate on the bottom that evenly distributes the weight of your kegs for maximum durability, and it comes with two removable storage shelves that allow you to convert the kegerator into a regular refrigerator or beverage cooler when it's not being used to dispense kegs. PLEASE NOTE: This is a homebrew kegerator and includes ball lock keg couplers for home brew kegs; it will not tap commercial D system kegs.

• INCLUDES COMPLETE KEG TAPPING KIT: With the direct draw kit included with this kegerator, all that will be left up to you is to fill the CO2 tank and provide the kegs of brew! The kit includes an upgraded dual faucet stainless steel draft tower, a CO2 tank with a red corrosion-resistant coating, and a premium dual gauge regulator at no additional charge to you, meaning you will get an extra $37 worth of value added to this kit.
• LARGE INTERIOR: This keg beer refrigerator has a spacious interior that is large enough to hold up to three ball lock home-brew kegs. This allows you to dispense from two kegs while keeping a third cool for later. When you're not using this kegerator to dispense delicious home-brewed beer, it can be easily converted into an all-refrigerator for extra food and beverage storage. The two included adjustable shelves can be placed far enough apart to hold gallon jugs or 2-liter bottles.
• SLEEK AND STYLISH DESIGN: A textured top surface and guard rail lines the top of the beautiful black cabinet with stainless steel door, helping to prevent spillage and knocked over glasses. A dishwasher safe drip tray sits under the faucet to help catch drips and spills, and is dishwasher safe to make cleaning easy. Standing on four locking casters, this kegerator is easy to relocate around your home for parties and get-togethers, or to make cleaning more convenient.
• POWERFUL AND ENERGY EFFICIENT COOLING TECHNOLOGY: Thermostatic temperature control lets you keep this keg cooler in the range of 35 degrees Fahrenheit to 42 degrees Fahrenheit, allowing you to adjust the temperature to best suit the type of beer you'll be dispensing. The adjustable mechanical temperature control is easily accessed at the back of the unit. This kegerator has a 25% more energy efficient design to deliver powerful cooling while saving you money each month.
• PLEASE NOTE: This is a homebrew kegerator and includes ball lock keg couplers for home brew kegs; it will not tap commercial D system kegs

User questions & answers

Question:	What adapters would I need for commercial 1/6 keg
Answer:	Hello, Thank you for your question. You would need a D system coupler for a standard commercial 1/6 keg. Thank you, Beverage Factory
Question:	Is it safe to keep this outside in the hot and cold
Answer:	Hello Cally, This is an indoor unit and should be installed in a well-ventilated area with temperatures above 60°F (16°C) and below 90°F (32°C). This unit must be installed inan area protected from the elements, such as wind, rain, water spray or drips. Anthony
Question:	Will this work as a built-in, in an outdoor kitchen
Answer:	Hello, Unfortunately, this unit is not intended for built-in or under counter use, as it requires ventilation in the back to reach optimal temperatures. Thank you, Charlie Beverage Factory (800) 710-9939
Question:	If you mound the tank on the inside can you still fit three kegs in the unit
Answer:	You will be able to fit all three kegs and the Co2 tank inside the unit. If you have any further questions you are welcome to contact our Sales Department as they have extensive product knowledge. They can be reached at 800-710-9939 option 4.Sincerely,KaylynBeverage Factory800.710.9939

Product features

Convenient Design Features

Kegco's HBK209 Series features a removable recessed drip tray with a dishwasher-safe plastic grill, an attractive and easy-to-install chrome safety rail, and locking casters that make it easy to move the unit from room to room.

Large Interior

This kegerator has a spacious interior that is large enough to hold up to three 5 gallon Cornelius ball lock home brew kegs. It can also hold any full size keg or up to two 5 gallon D system kegs.

Converts to a Refrigerator

Two adjustable wire shelves are included, allowing you to convert the keg refrigerator into a regular all-refrigerator when you need extra refrigerated storage space for food and other beverages.

External Tank Mount with Knockout

Save space inside the cabinet by mounting the tank and regulator on the back of the unit. A knockout allows you to use a single product regulator outside of the kegerator, so you can adjust the pressure without opening the door.

Exclusive Homebrew Kegerator Kit

This keg beer cooler is equipped with all the components you need to dispense two ball lock home brew kegs at the same time. The 3" diameter polished stainless steel draft tower is fitted with two 5 foot beer lines, two chrome standard beer faucets, and two black faucet knobs. The two complete ball lock home brew keg tap sets each include both gas in and beer out couplers for easy tapping of ball lock Cornelius Pepsi kegs. The dual gauge CO2 regulator measures your output pressure and also lets you know when your tank is getting low on gas. The 5 lb. aluminum CO2 tank* has a glossy electric red epoxy finish that helps protect against corrosion and wear.

*The tank is shipped empty and must be filled locally.

Kegco 3" Diameter Polished Stainless Steel Dual Faucet Draft Tower with Chrome Faucets

This tower is a commercial grade single column, dual faucet, 3" diameter stainless steel draft tower. It comes complete with two chrome plated faucets with brass levers and two 5 foot lengths of 3/16" I.D. clear beer tubing. The tower is mounted using the gasket and four screws that are included.

Two Complete Ball Lock Home Brew Keg Tap Sets

These complete ball lock home brew keg tap sets include both gas in and beer out couplers for easy tapping of ball lock Cornelius Pepsi kegs. The gas in has a 1/4" nut and 5/16" hose barb already attached for easy connection to the air line. The beer out connector has a 3/16" hose barb that connects to the 3/16" beer line.

Kegco 762-2 Commercial Grade Dual Gauge Two Product Regulator

Kegco's 762-2 Double Gauge Two Product Commercial Grade Regulator ensures peak performance in demanding commercial environments. It features a T-style adjustment valve that makes it easier than ever to adjust the keg pressure when the regulator is cold. This two product regulator features a y-splitter for applications where two kegs will be dispensed at the same keg pressure, and has two independent shut-off valves. A gauge on the top indicates how much CO2 pressure is inside of the keg while a gauge on the side indicates the volume of CO2 gas remaining in the tank.

Kegco B5-RED Empty 5 lb. Aluminum CO2 Tank with Electric Red Epoxy Finish

This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. It features an eye-catching powder coated epoxy finish in Electric Red that acts as an extra layer of protection against corrosion and wear. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada markings. The tanks have CGA320 valves with male threads for use with CO2 regulators. An average fill is good for 5-6 kegs.

Product description

SETROVIC Professional Keg CO2 Regulator Beer Regulator with Special Dual Gauge Pressure Design Let You Clearly to Read Working Pressure in The System and CO2 Tank Pressure



Package Include:

1 X Keg Regulator

2 X Washer

1 X Hose Clamp

1 X Instruction Manual



Both Gauges Feature an Easy to Read Design

0-60 PSI Output Pressure Gauge: Displays CO2 pressure in the keg.

0-3000 PSI Tank Pressure Gauge: Displays the amount of co2 pressure volume in the tank.



Suitable for 5/16" gas line, hose clamp connected in case of leakage.

Convenience design can be used in commercial environments like beer bars, tasting rooms, restaurants and brew setups etc.

With safety relief valve which will blow off when the pressure go more than 45PSI.

Washer and hose clamps will guarantee no leak problem.

Quick and accurate pressure adjustments through big manual pressure adjustment knob with no tools needed.

Dual-stage body gives more output pressure no matter how the pressure of cylinder changes! More precise control the amount of output pressure adjustment .

• High Quality & No Leaks: CO2 keg regulator constructed of forged premium brass. Always place a washer between the lock-down nut and the tank, hose clamp helps to further fix of outlet gas line. Pressure regulators ensure fast and stable transmission without leaking.
• Professional Dual Gauges - Easy To Read: The beer regulator is a heavy duty unit made with double gauges to accurately measure working pressure in the system and CO2 tank pressure. (0-60psi）output pressure gauge measures CO2 pressure in the keg,（0-3000psi）tank pressure gauge measures co2 volume in the tank. The regulators has 2 control knobs for more precise control when making small adjustments to the output pressure.
• Easy Installation & Safely: This CO2 regulator with CGA-320 inlets can be easy to connect to CO2 cylinder. All you need to install this beer keg regulator is an adjustable wrench. Each unit is supplied with two O-ring washers, regular replacement of washers ensures long-term use. Built-on sintered metal filter in the stem keeps harmful contaminants out of the regulator. Customized manual relief valve releases pressure at 55-65 PSI each time for further adjustment and safety concern.
• Wide Applications: CO2 pressure regulator with standard CGA-320 connection valve can be attach to USA CO2 tank for maximum convenience and maximum efficiency brewing. It is convenience used in commercial environments like beer bars,tasting rooms, restaurants and brew setups etc. If you enjoy home-brew, it will be a great choice for you .
• Quality and Efficient Service: We stand by the quality of our products and provides efficient customer service and 24 hours email assistance makes you have a nice shopping experience.

User questions & answers

Question:	Is this worth buying
Answer:	left hand gauge is tank. top is bottle/keg.
Question:	Is this good for homeuse
Answer:	Yes it was easy to work