9 best dremel bit for drill

Product description

Dremel accessories are truly among the finest products to maximize your woodworking experience. Built on a foundation of technology and innovation, Dremel accessories always deliver the most professional results.

• Compatible with all Dremel rotary tools.
• Titanium coated brad points stay on center and begin drilling immediately.
• High-speed drill bits ideal for drilling into wood.
• Now drill holes up to 1/4" diameter
• Includes bits for 1/8", 5/32", 3/16" and 1/4" (1/8" Shank on all bit sizes).

User questions & answers

Question:	Can I use these bits to make a hole in very thin tin containers or what dremel bit can I use? I would like 1/4 holes
Answer:	6.5 AñOS
Question:	How long are these bits ? I need to make a 1/4" hole 3/4" deep in a wood shelf using the dremel plung router or drill press
Answer:	These are not designed to be used for protection. This is a costume only.
Question:	can bit drill hardened steel
Answer:	No ring on the glove....
Question:	would these work with a heavy plastic (i.e. thicker guitar picks
Answer:	Manually

Product features

The Ultimate Solution

Build drawers, cabinets and other DIY projects around home with ease with the Dremel 631 Brad Point Bits as it can drill wood accurately. Compatible with all Dremel rotary tools, these point bits are titanium coated that stay on center and begin drilling immediately. Easy and simple to use, the Dremel 631 Brad Point Bits is your solution for home improvements.

Product description

Dremel 561 Multipurpose Cutting Bit Rotary Tool Bit Cuts wood, plastic, fiberglass, drywall, laminate and aluminum and vinyl siding A high-speed cutter with a 1/8" steel shank Ideal for multi-purpose cutting Special Featuresdremel spiral cutting bit

From the Manufacturer

A high-speed cutter with a 1/8" steel shank. Ideal for cutting wood, plastic, fiberglass, drywall, laminate, aluminum and vinyl siding in a variety of applications--such as preparing an area for light fixtures or making cutouts in cabinets and paneling.

• The product is Spiral Cut Bit
• Steel shank cutter
• Cuts wood, plastic, fiberglass, drywall, laminate, aluminum, etc.
• 1/8" shank
• Do not run in excess of 30,000 RPM

User questions & answers

Question:	Can this be used on Mm
Answer:	TBH, I will never use them again. The max they will cut well is 1/8" and even then its nearly impossible to control the obnoxious bit... Get a hole cutter, the big circular blades, those just fit onto your drill and make it easy to get great looking results. These just rip and tear and you find plastic shards for decades later everywhere.. Also, these bits when purchased alone are ridiculously expensive. To max your buying power get the circle cutter adaptor (total POS) cheap and flimsy- though comes with 3 bits all for like 13$ whereas each bit is like 7$. I cut acrylic and fabricate it every day, you learn quickly what works and what does not.
Question:	Will it cut 0.25mm carbon fiber sheets
Answer:	The sanding tube are something like 60-80 grit sandpapaer. It works much like my dremmil but not as powerful. The metal bits are for fine tuning/smoothing out and do not remove much material. It is veriable speed and the fast setting it fairly powerful. The short answer is yes, I think so. However, I don’t think it will work as well as a dremmel. Dremmel bits will not fit in this as the shafts are larger.
Question:	Can this Be used to chase cracks in a existing concrete slab
Answer:	Dear customer, Please rest assured that all MelodySusie nail drills are under the 6-month warranty from the purchase date. You can use the metal bit to shorten the nails. Rest assured that MelodySusie always stands behind our products. Please contact MelodySusie Amazon Support via below link: https://www.amazon.com/hz/help/contact/A24IL96TV4XLBY?marketplaceID=ATVPDKIKX0DER
Question:	can this cut thick plexiglas with out damaging it? first time cautting this type of stuff
Answer:	Maybe try a return

Product features

EZ Lock Thin Cut Reinforced Cut-Off Wheel

The EZ409 is a reinforced cut-off wheel ideal for making thin cuts in metal. It makes 2X more cuts compared to the Dremel 409. Use with the EZ402 Mandrel. 5 wheels per pack.

EZ Lock Reinforced Cut-Off Wheels

These EZ Lock Cut-Off Wheels are great for making cuts in metal. They make 2X more cuts then their regular counterpart (EZ426CU vs. 420 and EZ456 vs. 426). Use with the EZ402 Mandrel.

EZ406 includes 1 EZ402 Mandrel and 5 EZ456 wheels.

EZ426CU and EZ456 include 5 wheels per pack.

EZ456B is pack of 12 EZ456 wheels.

EZ Lock Premium Metal Cutting Wheel

The EZ506CU cutting wheel features a super abrasive grit called cubic boron nitride or CBN. CBN used on a cut-off wheel allows the wheel to remain sharp longer, stay cool, and it won’t shrink. The 506CU cutting wheel lasts at least 20 times longer than our fiberglass-reinforced cutting wheels based on internal testing. Use with the EZ402 Mandrel.

Wood Cutting Wheels

Dremel 543 and EZ544 are both carbide cutting wheels for cutting and shaping on woods, fiberglass, plastics and laminates. Do not use them on metals. For 543 the mandrel is included; for EZ544 use the EZ402 Mandrel.

Dremel 546 Rip/Crosscut Blade is a long-lasting, mini circular blade that cuts both with and across the grain on wood and wood-like materials. It is designed to be used only in conjunction with the Dremel 670 Mini Saw Attachment. Therefore, no mandrel is used.

Plastic Cutting Wheels

The EZ476 is a reinforced cut-off wheel ideal for making clean cuts in plastics. Use with the EZ402 Mandrel. 5 wheels per pack.

Hard Materials Cutting Wheels

Dremel 545 and EZ545 are both diamond wheels great for cutting, sawing and carving hard materials; such as, marble, concrete, brick, porcelain, ceramics, hard epoxy and soft and hard wood. Do not use them on metals. For 545 use the 402 Mandrel (included); for EZ545 use the EZ402 Mandrel.

Drywall Cutting Bit: 560

The Dremel 560 gives you fast, clean cuts in drywall.

Use with the Dremel Multipurpose Cutting Attachment (model 565).

Multipurpose Cutting Bit: 561

The Dremel 561 cuts hard wood up to 3/8" and soft wood up to 5/8". Also cuts plastics, fiberglass, drywall, laminate, aluminum and vinyl siding.

Use with the Dremel Multipurpose Cutting Attachment (model 565).

Tile Cutting Bit: 562

The Dremel 562 cuts ceramic wall tiles, cement board, and plaster.

Not for use on floor tiles.

Use with the Dremel Tile Cutting Attachment (model 566).

Carbide Grout Removal Bits: 569 and 570

The Dremel 569 and 570 are ideal for replacing wall and floor grout or removing grout to replace broken tiles.

Use with the Dremel Grout Removal Attachment (model 568).

EZ Lock System

The Dremel EZ Lock makes accessory changes as easy as PULL - TWIST - RELEASE. The one-piece mandrel design simplifies the process of changing cutting wheels.

Cutting Recommended Speed Settings

Refer to the above chart for recommended speed setting for cutting accessories.

Grout Removal Recommended Speed Settings

Refer to the above chart for recommended speed setting for grout removal accessories.

Product description

This diamond-impregnated core-style bit features superior long life and is ideal for drilling in both flat and contoured surfaces. Diamond grit a full 360-degrees around the circumference of the bit allows it to be used in a rasping action to enlarge a hole if needed. Holes on the side of the bit allow the removal of glass dust from inside the bit. Each bit is packaged with Dremel cutting oil to increase the speed of cut and prevent damage to the bit from overheating.

• Drill holes in both flat and contoured glass
• Diamond-impregnated cutting bit for long life
• Diamond grit around the circumference of the bit allows it to rasp a larger hole if needed
• Holes on the side of the bit allow the removal of material

User questions & answers

Question:	I need to cut a small hole out of the middle of a slightly curved rear view mirror. Will this work for that
Answer:	I have mine mounted to a Router table, and do not recall having to go buy screws.
Question:	Can I trim 1/8 inch off an Aquarium lid? Our is there something better? I have built a DIY rail so that the glass will slid to open and close it
Answer:	pan head 8-32 x 5/16" long. The supplied screws have a torx drive.
Question:	Will this drill through stone, like flat stones less than
Answer:	The DNP6913 is not compatible with the DW670 laminate trimmer.
Question:	what is the recommended rpm for this bit
Answer:	Without measuring the thing, I can say that your standard bushings will fit. It is the same size as the full size router base hole. I have used Harbor Freight bushings and they fit.

Product description

This diamond-impregnated core-style bit features superior long life and is ideal for drilling in both flat and contoured surfaces. Diamond grit a full 360-degrees around the circumference of the bit allows it to be used in a rasping action to enlarge a hole if needed. Holes on the side of the bit allow the removal of glass dust from inside the bit.

• Drill holes in both flat and contoured glass
• Diamond-impregnated cutting bit for long life
• Diamond grit around the circumference of the bit allows it to rasp a larger hole if needed
• Holes on the side of the bit allow the removal of material
• Dremel cutting oil not included.

User questions & answers

Question:	Can this be used with the cordless minimite dremel
Answer:	Yes, it is set up for the Drexel tool, but it has to be run according to the rims of the tool you have. We used it with a drill press and put the glass in a dishpan to cover it with water so the glass did not spray while being drilled. Wear eye protection however.
Question:	Will this fit a dremel 200 series and can I use it to drill a hole in a mirror
Answer:	Thank you for your question. No these are for the rotary tools only. For further questions please contact Dremel @ 800-437-3635 M-F CST
Question:	Could you please tell me if this will cut through beach pebbles for jewelry making
Answer:	Thank you for your question. The Dremel 561 Multipurpose Cutting Bit can cut 0.25mm of carbon fiber sheets. For further assistance, please contact us at 1-800-437-3635, Monday - Friday, 8A-5P CST.
Question:	Can this be used with the regular Dremel tool
Answer:	Totally wrong bit for that. You need a diamond bit. There are small sets of diamond bits for sale, not too expensive. Having said that, I wouldn't work on cracks more than a few inches, and not very deep - with a dremel. You might burn out the dremel or just wear out a tiny diamond blade. Better to use a 4-1/2" grinder with a masonry blade.

Product description

The 664DR Diamond Drill FlipBit features superior long life compared to other diamond drill bits and its flute design is faster at eliminating material compared to core bits. Its one-of-a-kind FlipBit design lets you drill two hole sizes with one bit by simply flipping the bit over to select a different size. The FipBit is ideal for drilling in both flat and contoured surfaces and can be used to enlarge holes and make small cuts. Makers will find the 664DR ideal for creating jewelry, ornaments, art, and decor. The 664DR Diamond Drill FlipBit can be used on glass, ceramic wall tile, glass block, stone, and glass bottles.

• New FlipBit design - Use one bit to make 1.6mm and 2.1mm holes
• Perform three functions - drill holes, enlarge holes, make small cuts
• Drill hard materials - glass, tile, stone, ceramics, and more
• 5X longer life than existing Dremel solutions

User questions & answers

Question:	Can you drill a hole in a seashell with this
Answer:	The bigger bit is 5/64 which is smaller than 1/8. Don’t know about steel. It does well in sea glass. Bit will snap if you use any sideways motion.
Question:	Does it work well on seaglass
Answer:	Yes it should work fine. I just checked the dremel website to make sure the mini mite accepts the 1/8th inch shank of the hole saw.
Question:	Can you use it on crystals
Answer:	As long as the Dremel accepts the 1/8 shank is fine. It will drill through a mirror; however, if the width is to thin be careful. Let the bit to do the job and very light force. Do not rush. Do not forget to wet the hole to keep thing cool.
Question:	Can this bit be used to drill steel? and 2) Is this product available to drill 1/8-in holes
Answer:	It will cut through beach pebbles. Use water to help flush the cuttings and keep things cool. Not all pebbles will be the same hardness so some will cut easier than others.

Product description

Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30, 000 RPM.

From the Manufacturer

Dremel accessories are truly among the finest products to maximize your woodworking experience. Built on a foundation of technology and innovation, Dremel accessories always deliver the most professional results.

• Our versatile and simple-to-use Carving bits make it easy to express your creativity
• Carving bits work well for detailed material removal in applications like shaping, carving, engraving hollowing, precision cutting, grooving, slotting, inlaying, making tapered holes or freehand routing
• APPLICATIONS: Carving / Engraving / Etching (Teal color code)
• WORKING DIAMETER: 5/16" (7.9mm), SHANK: 1/8", (3.2 mm), MATERIAL: High Speed Steel
• The Flame shape of the Carving bit makes concave side cuts, V-bottom slots and grooves
• 1 rotary accessory included
• Dremel accessories are also color-coded into usage categories, to find more Engraving & Carving accessories look for the Teal color code

User questions & answers

Question:	Does it work
Answer:	When you look at the info of all the drilling that you can use this bit on, it shows that they are drilling or going to drill a hole in a shell.
Question:	What does it mean accessories to use for freehand ? Can't they be used with the flex shaft
Answer:	Im not sure what seaglass is. As far as glass goes I haven`t work on glass only stone. I will say that I purchased a bottle of CRL Diamond Tool Collant for drilling through stone. So that might be something you would use along with a diamond drill bit to make a hole.
Question:	which bit for coffee cans
Answer:	Thank you for your question. The Dremel 664DR Diamond Drill FlipBit can be used on crystals. For further assistance, please contact us at 1-800-4-DREMEL (1-800-437-3635), Monday - Friday, 8A - 5P CST.

Product features

High Speed Cutters

Available in many shapes, high speed cutters are used in carving, cutting and slotting in wood, plastics and soft metals such as aluminum, copper, and brass. These are the accessories to use for freehand routing or carving in wood or plastic and for precision cutting. Made with high quality steel. 1/8" shank.

Structured Tooth Tungsten Carbide Cutters

Fast-cutting sharp teeth for greater material removal with minimum loading. Use on fiberglass, wood, plastic, epoxy, rubber, laminates, particle board and ceramic tile. 1/8" shank.

Tungsten Carbide Cutters

These are tough, long-lived cutters for use on hardened steel, fired ceramics and other hard materials. They can be used for engraving on tools and garden equipment. 1/8" shank.

Engraving cutters

This group has a wide variety of sizes and shapes, and are made for intricate work on ceramics, wood carvings, jewelry and scrimshaw. They often are used in making complicated printed circuit boards. They should not be used on steel and other very hard materials but are excellent on wood, plastic and soft metals. 1/8" shank.

Diamond Wheel Points

For fine detail work, cutting, engraving, carving, touch-up and finishing. Bits are covered with diamond particles. 1/8" Shank.

Not recommended for drilling.

Product description

Dremel 628-01 7 Piece Drill Bit Set

• Ideal for moto-tools, cordless tools and flex shaft tools
• Bits are ideal for drilling into soft materials
• Set Includes 1/32", 3/64", 1/16", 5/64", 3/32", 7/64" and 1/8" drill bits

Product description

Dremel 628-01 7 Piece Drill Bit Set

From the Manufacturer

Bits made of high speed steel. Sizes include 1/32-, 3/64-, 1/16-, 5/64-, 3/32-, 7/64-, and 1/8-inch.

• 7-piece set contains bit ideal for drilling into soft materials
• Includes 1/32-inch, 3/64-inch, 1/16-inch, 5/64-inch, 3/32-inch, 7/64-inch, and 1/8-inch drill bits
• Ideal for moto-tools, cordless tools, and flex shaft tools
• Made of high speed steel
• Convenient storage case included

User questions & answers

Question:	can this work on Dermel
Answer:	It is not a guide to measure what size hole you want. It is a clear baseplate for the router. It will accept many different bits in the hold in the center of the baseplate.
Question:	I need tiny bits for a project, but don't have a dremel. Can these be used in a standard power drill or an old-fashioned manual egg-beater style drill
Answer:	I purchased this base so that I could attach a collar to rout things out with a jig where the one that comes with the router does not lend itself to working with a jig.
Question:	DO i need special chuck
Answer:	It is a Christmas present haven't set it up yet but did open and it included a very small booklet containing minimal information, but there are videos on the website.
Question:	Would these drill bits work to drill holes in sea shells for jewelry or wind chimes
Answer:	Yes

Product description

The Dremel wood drill bit set contains 4 drill bits with centering point for drilling into wood. The different drilling diameters included are 3, 4, 5 and 6 mm. The titanium coating offers high performance and longer lifetime.

• Sold on Amazon

User questions & answers

Question:	is this for bits or a metal sign
Answer:	No
Question:	Are these Brad Point Bits
Answer:	Yes
Question:	Is this listing for a set of 636 Dremel drill bits or a tin sign
Answer:	Thanks for your question. The Dremel 124 High Speed Cutter - or any of our High Speed Cutters - can be used in our tools or with our Flex Shaft Attachment (225) connected to our tool. The reference to freehand simply indicates the use of a cutting guide or depth management is not necessary to safely operate this accessory. A complete listing of safety and use instructions are available in the owners manual for each specific high speed rotary tool. For further information, please contact Dremel at 1-800-437-3635, M - F, 8 AM - 5 PM CST.
Question:	If I order 2 sets is the shipping any different
Answer:	Thank you for your question. I'm not sure what your application for the metal coffee cans would be, but the #124 High Speed Cutter isn't for "cutting". It will allow you to shape, hollow, grove and slot. It can be used on "Soft Metals". If you plan on "cutting" the metal, then you would have to use a cut-off wheel. We don't have a bit for "cutting". Should you have further questions, please call our toll free number of 1-800-437-3635, Mon-Fri, 8 am - 5 pm, CST

Product features

Wood Drill Bit Set

The Dremel wood drill bit set contains four drill bits with centering point for drilling into wood, all with varying diameters. The titanium coating offers high performance and longer lifetime.