12 best water heater for radiant heats
Water heaters for radiant heating systems are a crucial component of hydronic radiant heating systems, which are used to efficiently and evenly heat indoor spaces. These systems are particularly popular for heating homes and commercial buildings. Here's what you need to know about water heaters for radiant heat:
Hydronic Radiant Heating: Hydronic radiant heating systems use water as a heat transfer medium. These systems consist of a network of pipes or tubing installed under the floor, within walls, or in the ceiling. Hot water is circulated through these pipes to provide even, comfortable heat to the indoor space.
Types of Water Heaters for Radiant Heat:
Boilers: Boilers are the most common type of water heater used for radiant heating. They heat water to a specific temperature and then pump it through the tubing in the radiant system. Boilers can be fueled by various sources, including natural gas, propane, oil, or electricity.
Tankless Water Heaters: Tankless water heaters, also known as on-demand water heaters, can be used for radiant heat by modulating their output to provide hot water at the desired temperature. They are energy-efficient and provide hot water on demand without the need for a storage tank.
Heat Pumps: Heat pump water heaters can also be used for radiant heating. They extract heat from the air or ground and transfer it to the water, making them energy-efficient options. They work well in moderate climates.
Efficiency: When selecting a water heater for radiant heat, consider its efficiency. Higher-efficiency units can save energy and reduce operating costs. Look for water heaters with an Energy Star rating or other efficiency certifications.
Sizing: Proper sizing is crucial for the effectiveness of the system. The water heater's capacity should match the heating load of the space it serves. Undersized heaters may struggle to provide sufficient heat, while oversized ones can lead to energy wastage.
Zoning: Radiant heating systems often incorporate zoning, which allows different areas of the building to be heated independently. Zoning can be controlled through a central control system or individual thermostats.
Installation: Installation of a water heater for radiant heat should be carried out by a professional to ensure the system operates efficiently and safely. Proper insulation of the tubing and pipes is essential to minimize heat loss.
Maintenance: Regular maintenance of the water heater is necessary to ensure its longevity and efficiency. This includes flushing the system to remove sediment, checking for leaks, and inspecting components like pumps and valves.
Cost Considerations: The cost of a water heater for radiant heat includes the purchase price, installation costs, and ongoing operating expenses. Consider your budget and long-term energy savings when making a choice.
Water heaters for radiant heating systems are an effective and energy-efficient way to provide comfortable heating in indoor spaces. Choosing the right type and size of water heater, along with proper installation and maintenance, is essential for the successful operation of a hydronic radiant heating system.
Below you can find our editor's choice of the best water heater for radiant heats on the marketProduct description
New cozy coop flat panel heater is the perfect small space heater for chicken coops. Provides gentle radiant heat to cold areas. Perfect for chicken coops or other pet houses. Provides just the right heat to Chicks & chickens. No bulbs to replace. More uniform heat than lamps. Resembles a computer Monitor. Razor thin design, cozy coop measures only 5/8" thick & can be mounted to sides of chicken coops.' included for convenient use on flat surfaces. Two-heat control for optimal comfort. Uses only 200W & saves energy. Heater to 180 Degree. ETL listed. Measures only 19" x 13" x 5/8" weight 5 lbs. Unplug unit and wipe with a damp cloth
- Safe for chicken coops
- Recommended by the chicken Chick
- Uses Only 200 watts
- No bulbs or lamps to replace
- Perfect heat for Small animal houses
- This is an aftermarket of generic part
User questions & answers
Question: | Would this be sufficient enough to heat the inside of my car in the winter months |
Answer: | If you are asking about winter storage for your car to keep it from getting musty, that might work. Sort of like heat sticks for gun safes and pianos for the dampness. If your asking about living in your car, it wouldn't be warm enough for me. |
Question: | House for stray cats...does this heater need to be clear of all bedding? is there a chance of fire |
Answer: | I have mine in a cat house with towels and a cat bed around it. The towels touch it. It's uncomfortably hot to touch on high, but doesn't burn my hand so I felt it was safe. I've not had any issues with it so far. |
Question: | Do you have to worry about this being to close to the chickens? Do you have to mount it where they cant get to |
Answer: | The answer to both questions is No according to the instructions. I did place mine on a wall so the chickens don't poop on it. It sits just above their heads while roosting. It also heats objects. Also it will only heat to about 45 degrees which is the highest temp you want for chickens. If the chickens get too hot they move away from it. The panel is not hot but warm to the touch. I find it to be very safe easy to install. Haven't had -30 degree weather yet. It has been in the 20's here at night and I really do love the product. Safe for everyone. |
Question: | When will the built in thermastate turn on and shut off |
Answer: | I couldn’t find this information either so I emailed the company and asked. This is their reply “Thank you for your inquiry. The internal thermostat does not automatically shut the unit off or on; it only regulates the temperature of the unit to maintain 140F. The unit will ONLY shut off if it overheats to above 180F; this product must be manually turned on and off.” |
Product features
Cozy Products Safe Chicken Coop Pet Heater
One of our Best-Selling Cozy Coop Flat Panel Heater combines both radiant & convection heat to protect your birds and poultry from the cold. This powerful heater is safe to use around animals, while only using about 13% the electricity of a standard 1,500 watt space heater.
Product description
Chicken Coop Heater 140 Watts Energy Efficient Design Chicken Heater UL-Compliant Safer Than Brooder Lamps Heater for Chicken Coop Two Ways to Use, One Size, Black
- 【Thermostats & Heat-Sensitive Sticker】: Comes with a power switch with a temperature adjustment range of 140~167℉/(60~75℃); Effective radiant heat range within 40 cm. The heat-sensitive sticker will alert you to the condition of the temperature. (This sticker is black for temperatures below 45℃/ 113℉ and red for temperatures above 45℃/ 113℉)
- 【Energy-efficient Design】: Reducing electricity use is our eco-friendly design philosophy. The power consumption is ONLY 140 Watts makes it more energy efficient than most of others.
- 【UL Test Standards & Thermostatic System】: The built-in heating wire of petnf chicken coop heater meets the UL standard. This heater has a powerful thermostatic system to maintain the temperature of the chicken heater surface. Using radiant heat to keep your poultry warm while better protecting their safety.
- 【Two Ways to Use】: Easy to install, two options to install to fit different scenes; you can choose the standing style or wall-mounted style. Also paired with a 9.8 ft/3 m length wire to extend your use of the space.
- 【Safe for Chicken Coops】: The type of heat is radiant heat, it's very safe for your chickens. Good for the puppies and kittens to keep warm, protect them from frostbite, it's also the perfect home for small animals. Let’s provide a warm and comfortable area for your chicken!
User questions & answers
Question: | Would this heater work for an outdoor house for a cat or dog |
Answer: | You would need a wifi thermostat. |
Question: | Is it solar powered |
Answer: | No its plastic |
Question: | Can this product be set up vertically and/or horizontally |
Answer: | Unless I am having trouble reading, THERE IS NO BTU RATING... This is a very poor ad. Will it run on battery alone? |
Question: | Is this weatherproof or even better waterproof |
Answer: | The heater has washable lifetime filters. |
Product features
Petnf Safe Chicken Coop Heater
The chicken heating panel combines radiant and convective heating to protect your poultry and pets from the cold. Consumes only 140 watts, which is only 9% of the electricity used by a standard 1500 watt space heater!
Applications
Petnf primarily uses radiant heating technology, which means that heat is transferred from one object to another, with the warmth coming from very close to the heating plate. Creating the temperature while keeping your poultry and pets safe.
Our design is not to heat an entire room or space, but to warm any animal sitting or standing next to it. This product is so powerful that your chickens can feel the temperature within 40cm.
Benefits
-Save Energy: Typical space heaters use 1500-2500 watts while petnf uses only 140 watts.
-Risk Reduction: Space heaters can cause fires and blow circuit breakers. Petnf coop heater is radiant heat.
-Go Green: Save money, energy-saving, and zero emissions.
-Stay Warm: Good for the puppies and kittens to keep warm, protect them from frostbite!
Quality & Safety
petnf is a young company specializing in pet and poultry products. We have the strength to develop the 2020 newest type of radiant heat chicken heating plate, which will let your chicken spend this winter safely.
Vet & Expert Recommended
Our after-sales service ensures that you can use our products for a long time without any worries. We also work with veterinarians from North American veterinary hospitals and specialists with extensive experience in the pet sector. In their opinion, petnf is a company you can trust.
Energy Efficient
We have designed our products to be more energy efficient. When you use a petnf chicken coop heater, you only have to consume 140 watts of electricity. Saving you money on your electricity bill and at the same time contributing to the environment.
Electric Heating Wires
petnf has always focused on the safety of its products and our chicken heating plates use electric heating wires that meet the standards of the UL test report.
Product description
This Smart Technology electric tankless water heater is configured as a "whole home" model for climates where incoming water temperature is 62°F and above. The ECO 18 is capable of heating over 2.5 gallons per minute, which is the equivalent of one water saver shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 62°F, and an output setting of 105° F. Two showers emitting no more than 1.5 gpm each can be run simultaneously when incoming water temperature is above 70° F. Digital temperature control allows you to set your temperature in increments of 1°. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. However, when sized properly it will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 18 requires a minimum 150 amp electrical panel for installation with 40 amp double pole breakers connected to sets of #8 awg wire. Plumbing connections are 3/4" NPT. For additional assistance please feel free to contact our support center at 877-474-6473.
From the Manufacturer
This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 62 Degree F and above. The ECO 18 is capable of heating over 2.5-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 62 Degree F. Two showers can be run simultaneously when incoming water temperature is above 70 Degree F in warmer climates such as South Texas, South Florida, New Mexico, Arizona and South California. These models come with a digital temperature control that allows you to set your temperature in increments of 1 Degree. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.
- The product is highly durable
- The product is easy to use
- Manufactured in China
- Copper and stainless components
- Lifetime warranty for residential use
- Save up to 60% on your water heating costs with the most advanced, self modulating technology available
- Never run out of hot water with an ECOSMART tankless water heater.
User questions & answers
Question: | How do know which size to buy? We will supply two bathrooms, dish washer, clothes washer. What size should I choose |
Answer: | I noted someone below stating they got the largest one and they can only run one water source at a time. My guess is they installed it wrong by not getting the electric hooked up right, or maybe the unit was just defective, or they live in Alaska. I went under size with an Eco 27 a few years ago because that’s all my electric panel could handle. We have zero issues in the summer. During winter months we can only run one shower at a time and have to slowly fill a tub (maybe 3/4 fill speed). To save as much money as I am on electric bill and have unlimited shower lengths (only 1 person at a time mid-Dec to mid-March) is totally worth it. On here today because I’m thinking of upping my panel size so was thinking of going with a larger one now. Regardless, CCRC’s experience with the largest unit not working is nothing like the experience I’ve had, and again I intentionally undersized mine for the house. The website has a clear chart to explain size you need based on number of water fixtures in your home and ground water temperature. |
Question: | Can this unit supply a 3,700 sq foot home with 3 1/2 baths |
Answer: | In the lower states it can, but in the northern states, multiple simultaneous users, it will be overloaded. If you can afford a 3,700 square foot home, then you can place a unit in each appropriate demand zone and be very glad you did. I love mine, live in KY, get great supply when the water is above 60 degrees, and then it slows the flow as the temperature drops. I have dishwasher, washing machine, garden tube, 2 showers, 3 sinks and 4 people. It is better than great in the summer, okay spring and fall, and we are conservative in the winter. |
Question: | What is the power consumption of this tank-less heater |
Answer: | The instantaneous power consumption while the hot water is running is quite high (up to 18kW or 27kW depending on which model you’re looking at on this page). However, when no hot water is being used, the power consumption is 0 (or a minuscule amount to run an LED light or something). The total power consumption over the course of several days or longer should be much lower than a tank heater but the short term power usage while the heater is making hot water will be much higher than a tank heater. It’s just that the unit sits idle most of the time while a tank heater will use power fairly frequently even when no hot water is needed as the water in the tank cools off over time and needs to be re-heater fairly constantly |
Question: | remote |
Answer: | This unit does not have the ability to have a remote temperature control. |
Product features
3 Smart Steps for Endless Hot Water
Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.
Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.
Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.
Product description
Product Details
Model: RS15-6
Rated Power: 93/67/46W
Outlet: 3/4 inch
Max Flow: 36/29/20L/min
Rated Head: 20/16/13m
Volt/Freq: 110-120V/60Hz
Applications
Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on
Advantages
1.High efficiency, high flow, leak-tightness, low consumption
2.No noise environmental protection, ease of installation
3.No leakage, low noise, environmental protection, aesthetics, ease of installation and so on
4.Built-in high sensitive electronic sensors with three-speed control
Performance Datas
1) Suitable for medium: Hot water and ethanol maximum ratio of 1:1
2) Performance: Liquid temperature range: 0℉ - +212℉Maximum working pressure 10bar
3) Ambient temperature: not higher than 40
4) Voltage: 110-120V(±10%) ,Frequency: 60Hz.
5) Motor: Protection class IP44 Insulation class F
6) Material: Stainless Steel, PP, ceramics
7) Mounting position: Shaft horizontal mounting
8) Pump settings: Single-phase pipeline pump 3 files manually controlled single-phase motor is not overloaded casting pump length 130 mm
- Rated power: 93/67/46 W. NPT 3/4 inch (19.05 mm) inlet/outlet. Voltage/Frequency: 110-120V, 60Hz. Max pressure: 145 psi (10 bar),the circulation pump with three-speed control. Flow: 36/29/20 LPM (9.5/7.66/5.28 GPM). Max head: 6/4.9/4 m (20/16/13 ft);Pump housing: Aluminum. Impeller: Corrosion-resistant, composite, PES. Shaft: 45 # steel. Bearing: Carbon axia.
- Easy installation, only need a wrench to connect the pump to the pipeline, saving you the cost of plumbers; Instant hot water, waiting for 2-3 minutes in the past, now it takes only 15 seconds to get hot water.
- Prevent pipes from freezing in winter, especially for cold winter areas. In addition, if your pipes pass through the floor, the floor will also become warm.
- The circulation water pump features high efficiency with low consumption. High temperature resistance, anti-fraying, high flow and leak-tightness. Super silent, environmental friendly,saving energy, running power, reducing the waste of cold water and waiting time, suitable for water scarce areas, such as desert areas.
- KOLERFLO circulation water pump RS15-6 Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on.
User questions & answers
Question: | Are there instructions /operating manual available written in English |
Answer: | Yes, I bought them specifically to drill holes in things to use as succulent pots. I've used them on metal, glass, porcelain, plastic, gourds, pottery, terra cotta, etc. It took a little while to get used to holding the drill tightly to keep the bit from moving around on the item being drilled. But now I'm drilling like a pro, LOL!! |
Question: | how is it on electrical consumption |
Answer: | Dear customer, These diamond hole saws are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion, they are perfect for drilling glass, tile, porcelain tile, ceramic tile, brick, and stone, so you will be satisfied with them Warmest Regards StarQualityBargain Team |
Question: | Can this recirculate cold water instead of hot water? If i want to use it that way |
Answer: | Dear customer, These diamond hole saws can drill stone, tile, porcelain tile, ceramic tile, brick and so on. Warmest Regards StarQualityBargain Team |
Question: | Is the RS15-6 Green okay for potable water systems |
Answer: | Dear customer, The diamond drill bits are compatible with most drills, as long as the chuck of the drills will adjust to the diameter of the diamond drill bits. If you have any issues , please contact us, it is our duty to supply outstanding customer service Warmest Regards StarQualityBargain Team |
- 【Visible Temperature Display and Remote Control】 Unique visualized temperature display design and remote control (remote and battery included) helps you easily see and adjust the temperature without entering chicken coop. The temperature adjustment range of 130~160℉/(55~71℃) and you can adjust it by pressing the button "-" or "+" on the LED display or by remote control within 19.7 ft/6 m(without any barrier)
- 【Energy Save】 Comfortable and larger heat panel design protect chicks, birds from the cold in winter. The heater size is 19.68''X14'', lager than other heater and it only consumes 165 watts of electricity, which is 90% more energy-efficient than traditional 1500 watt heaters lamp
- 【Safer design】 Magicfly chicken heater has “button locking” function to prevent operation caused by birds touching the buttons. This heater panel also has “Automatic power off” function, which will stop working when accidentally falling to the ground, better avoid fire and other dangerous
- 【Multiple Install Ways】 The coop heater is easy install which can stand, lay flat, or be hung on the wall (wall nails are not included), and the length of the wire is up to 9.84 ft/3 m long, which fits different heating needs and different places
- 【Multi-purpose】 Magicfly Panel Heater is a safe, energy-saving, UL-certified product. It can not only be use in chicken coop, but also be used indoors. The heating keeps you warm in the cold, making it more comfortable and efficient at home or at work. Or for pet heating,like cat and dog
User questions & answers
Question: | Will the unit shut off once it reaches the temperature you set it at and come back on when it gets below that tempature |
Answer: | Dear Christina G, The power of our machine is 165 watts, the maximum temperature is 160 degrees Fahrenheit and the minimum temperature is 130 degrees Fahrenheit. The temperature can be adjusted as needed, and the machine will maintain the set temperature. |
Question: | Can I use this in a brooder box for day old chicks |
Answer: | As long as your brooder box could be into the Heater, then you could use it for day old chicks. We kindly suggest you measure the size of your brooder box first and then compare it with the size of our heater for reference. Hope the above helps. |
Question: | Hello, can this plug in cord be left or plugged outside during winter/rainy season, coz my chicken are outside, thanks |
Answer: | Dear wanjiru muthoni, We recommend to plugged inside (indoors). |
Question: | Does it get hot or is it more if a radiant heat like the others? What gets to 160 degrees |
Answer: | Hello linznscott, This product is radiant heat. The temperature adjustment range of 130~160℉/(55~71℃) and you can adjust it by pressing the button "-" or "+" on the LED display or by remote control within 19.7 ft/6 m(without any barrier). |
Product features
Remote Control
Magicfly Chicken Coop Heater is remote control available. You can use this remote control to adjust temperature and turn on/ off the heater within 6m (without any barrier)
Tips: You need to remove the battery insulator for first using.
How to change the battery: Just remove the case on the bottom and put the CR2025 batter in
Feet for Free Standing
Come with 2 easy-installed feet for free standing in your chicken coop or dog, cat house. Even for living room or office. Just insert the heater into the feet, no need any screws
Longer Wire
The wire of our coop heater is 9.84 ft, which fits different heating needs and different places
Safer Coop Heater
Our coop heater had UL certification, which is safe to use in coop and protect your birds and poultry from the cold and reduce the dangerous
Product description
The heat pro-performer AHS18-D is built for applications with more than 1 bathroom in the southern States where the incoming water temperatures no lower than 65 degree F and can be used for 1-1/2 bathroom in the colder climates where the incoming water temperature is above 45 degree F. Because the heat pro-performer continuously monitors all real time data collected 60 times a second through a range of sensors. It automatically adjusts to any application you may have, for example floor heating, multiple units in series and recirculation configurations. The heat pro-performer boasts a 3/4 in. Inlet and outlet which makes it a breeze for high flow applications. Using astm 304 stainless steel enclosure and heat exchangers ensures long lasting performance with no sediment build up or rust.
- The heat pro-performer AHS18-D is built for applications with more than 1 bathroom in the southern states where the incoming water temperatures no lower than 65 degrees F
- Because the heat pro-performer continuously monitors all real time data collected 60 times a second through a range of sensors
- It automatically adjusts to any application you may have, for example floor heating, multiple units in series and recirculation configurations
- The heat pro-performer boasts a 3/4 in. Inlet and outlet which makes it a breeze for high flow applications
- Heat electric tank less water heaters are 99% energy efficient which can translate to saving 10-25% on your water heating bills
User questions & answers
Question: | Need ahs11d |
Answer: | Gerald, SFM is a combination of diameter and the velocity (RPM) of the material measured in feet-per-minute as the spindle of a milling machine or lathe. 1 SFM equals 0.00508 m/s (meter per second, the SI unit of speed). The faster the spindle turns, and/or the larger the diameter, the higher the SFM. Depending on the size of the hole saw bit and the thickness of the glass, you may want to try a sample area of a scrap piece of the same kind of glass for your project. This way you can determine what is the best SFM. I would definitely start out with low RPMs to score the surface, and then increase the speed gradually. Testing scrap is best for determining SFM for your particular project you are investing time and quality. The Hole Saw Set, 10Pcs Diamond Drill Bit Set with Hole Saw Guide Jig Fixture,Hole Sizes 1/4-2 Inch works very well, I used it for a shower installation project, using the hole saw jig, perfect hole! Again, test is best for SFM, for any surface. |
Question: | Does this unit have the auto check diognosis via usb |
Answer: | no these are not suited for wood |
Question: | what does this come with? does it have an internal pressure relief valve |
Answer: | With your cordless or corded drill motor |
Question: | Can this unit be installed to a travel trailer on the outside of the trailer exposed to the elements |
Answer: | They're not the best tool in my shed |
Product description
This water heater offers quick, continuous hot water that is on demand for single point-of-use or multiple applications.Robust copper immersion heating elements with brass top increases durability and are threaded for easy replacement. Digital temperature control allows you to set your temperature in increments of 1°
- External digital thermostatic control with LED display (+/1 degree accuracy)
- Most advanced self-modulation, adjust power to meet hot water demand
- Durable Copper immersion two heating elements, field Serviceable. Flow Rate- up to 4.4 GPM
- Simple installation – bottom 3/4 inch NPT water connections
- Threaded for easy replacement, simple installation, digital temperature display
User questions & answers
Question: | Can this be used in a recirculating system |
Answer: | No where on the box does it say contains copper. Box reads.... 100% nonstick surface - hand washable and dishwasher safe- PFOAF Free, PTFE- fiberglass coating, safe up to 500 degrees, FDA approved. We are happy with our purchase. |
Question: | How many amps |
Answer: | Of course it can. |
Question: | how many breakers and what amp |
Answer: | No |
Question: | will this supply two showers, washer and dishwasher for two people? (1000 sf house |
Answer: | Made in China |
Product description
The 800 Watt Westar Infrared panel heaters are economical to use and an environmentally responsible alternative to 1500 Watt heaters. Using the same principle as the sun, WEXSTAR infrared heaters generate Infrared rays which are gently distributed uniformly across the room, and are absorbed by objects and walls that release the heat back evenly creating an overall feeling of warmth. This maintenance-free heater are built to last and can save up to 45% on heating costs. Great for bedrooms, offices, kitchens, basements, etc. The heater is ideal for rooms up to 250 sq. ft. Can be used for residential, commercial or industrial applications! C TUV US Certified
- Conventional heaters heat the surrounding air, hot air stays at the ceiling and the heat is distributed unevenly. Westar infrared technology works more efficiently and evenly by heating objects rather than the air, and using a fraction of the electricity
- No fan means 100% quiet and no stirred-up dust, ideal for people suffering from asthma or allergies.
- Can be mounted on the wall, or on the floor with Westar Stand Support separate accessory.
- Easily plug to a standard electrical 120 V outlet and does not require any professional installation.
- Westar heaters are free of maintenance and no further costs or parts to be replaced. Less than an inch thick, do not take much space and are easy to relocate.
User questions & answers
Question: | Can this . unit be hardwired |
Answer: | No, at least not easily. The power cords are affixed in such a way that they cannot be accessed. Some kind of filler is put in the cavity. |
Question: | How hot does the surface get |
Answer: | Very hot. One second of hand contact only. Ceiling mount only. Some far infrared panels can be touch and are for wall mount. |
Question: | Why is this double the price of the econohome panel? it's larger and has more watts (800 vs 600) but heats about slightly less space (250 vs |
Answer: | Econohome panels are convection heaters, heating up the air around them; these Wexstar panels are infrared heaters, heating up the matter in the room. I had the Econohome panel and liked it, but it wasn’t good for what I needed since I have a lot of air circulating in my space. |
Question: | is this "near infrared" or "far infrared |
Answer: | "Far" infrared, meaning the human eye can't see the light emitted. |
Product description
MAREY GA10LP Indoor Propane Gas Tankless Water Heater can provide up to 2. 7 Gal. per minute for a perfect shower at 115°F output water temperature. It is also called water heater on demand, because it heats water only when needed, saving energy. It is designed in the USA and it's perfect to supply endless hot water for up to 2 or 3 points of use simultaneously (for a variety of residential hot-water applications). Its compact design saves space and is easy to install: you will only need 2-D cell battery for the ignition and a venting (not included in the box). MAREY has been on the water heating business since 1955, bringing tradition and innovation together.
- Provide endless hot water on demand and only as needed
- Save up to 60% on electricity bills for water heating
- Compact design saves space and is easy to install almost anywhere
- No electrical connection is required so it's perfect alternative for those homes experiencing frequent power outages
- Unlimited hot water whenever is needed
- 5-year
- Allows water temperature to be controlled
User questions & answers
Question: | What size box does it ship in |
Answer: | Hello. The 10L ships in a box that measures approximately 16 x 28 x 10 inches. GadgetsGo is an Authorized Marey Distributor. Kind Regards, John M. GadgetsGo |
Question: | For gas heater what is the outside dimensions, high , wigth , depth. Is it 23.6x13.6x6.9 with the extaust cap on top. Thanks, Ray |
Answer: | Hi Ray. The dimensions you gave are for the body of the heater only, not including the exhaust cap, since it is removable, and not including the water and gas connections at the bottom.Kind Regards,RossGadgetsGo |
Question: | Does it need to be vented |
Answer: | yes i have one in an outdoor shower and the other inside a bathhouse and we put a 90 degree turn on it to go out the side of the wall and works just perfect. |
Question: | Does this come with exhaust/vent pipes |
Answer: | Greetings, The Marey Gas 10L Tankless heater does not come with the Exhaust/Vent pipes. You will need to locate B-vent or Z-Vent Pipe material size pipe 4" online. |
Product features
Marey 10L Gas Tankless Water Heater
This compact model saves space and allows easy installation just about anywhere. It heats unlimited volume of water as needed and permits you to regulate the water flow and gas flow to better temperature. So if you instant and on demand want hot water, this is the product for you!
It is also a perfect alternative for those homes experiencing frequent power outages since this heater does not require electricity. The 10L unit provides up to 3.1 Gallons Per Minute, to provide hot water for your home family at multiple points of use!
Easy to install!
Multiple Points of Use!
Enjoy many features! Check temperature map below for more information on simultaneous points of use on your region.
Save Energy!
It can last a lifetime, keeping 87% efficiency level!
We are in the market since 1955!
GA10LP
Avaliable in Propane Gas.
GA10NG
...or also Avaliable in Natural Gas! Make sure you select your preferred gas type before you purchase your model.
- 【SUPERB MATERIALS】- Power: 24 KW; Hot Water Output: 12 L/min(3.2 GPM); Gas Supply: LPG(Liquid Petroleum Gas); Water Temperature: 50 °F -140 °F; This tankless water heater propane is crafted with stainless steel case and inner copper devices, making it anti-rust, high-temperature resistant, no water leakage, and durable. Come with a portable shower head kit.
- 【6-IN-1 MULTI PROTECTIONS】- Our propane water heater is upgraded with six protection ways to ensure your security on the shower, such as Over 75℃(167 °F) protection, low water flow protection, anti-frozen protection, over water pressure protection, no flame protection, 20min timer, etc.
- 【EFFORTLESS CONTROL】- You can easily adjust the water temperature by rotating the gas & water knobs on the panel. Switch the summer/winter mode to change the fire row amount, and save 40% gas in your bill. The combustion device will reach ≥80.8% thermal efficiency to save 11.5% energy. Start at a 0.015 MPA low water pressure; normal working pressure is 0.02 MPA-0.8 MPA.
- 【WALL-MOUNT & DETAILS】- This gas water heater is light-weight & portable to be installed on the wall, tree, or outside the RV for space-saving. Well-selected devices are included like copper standard G1/2" hose connectors, filtration mesh, gas emission tube, and copper water tank. Ignite the heater with 2 "D"cell batteries, and no pilot light is needed.
- 【DIVERSIBLE USE SCENARIOS】- CE test passed, fast to heat, this propane hot water heater is perfect for showering, pet washing, outdoor cleaning, camping and trip road, etc. Provide you with constant hot water, especially in winter or cold places. Instant, endless hot water, enjoy a comfortable showering at any time & any location.
User questions & answers
Question: | Is it correct that this cannot run longer that 20min |
Answer: | and drill will work, cordless or corded |
Question: | Is this on demand. Does it turn on when water is started or do you have to turn it on at every use |
Answer: | Actually it will not ,but I suggest you to aid the cutting with plenty of water |
Question: | Does this heater require AC power in addition to the batteries |
Answer: | Yes,I try to use it and amazonly the hole saw pieces do a clean cut for my glass.You just need to keep it wet while drilling slowly.If you drill it too fast ,you will have tendency to drill with more power and the hole saw set will go through quickly and shatter your glass. |
Question: | I just want to verify if this can be installed indoors |
Answer: | Are you asking do they run true? All.I can tell you is I have used this set to cut about 30 holes in several types of glass jars and bottles. I used a battery powered drill at medium speed with a small trickle of was running on the spot I was drilling. I did this on the laundry room somk. So far I haven't had any problems except the bits will drift a little when the bit first starts out |
Product features
Stainless Steel Material
This camping propane water heater adopts brushed stainless steel shelling, which makes it anti-rust and fashionable. We also send you a shower head kit and install accessories for your convenient showering.
Six Considerate Protections
This tankless rv water heater is designed with methods like Over 75℃(167 °F) protection, low water flow protection, anti-frozen protection, over water pressure protection, no flame protection, 20min timer, etc.
LED Screen & Knobs
We adopt an LED screen to display real-time water temperature. Gas control knob: rotate it clockwise to increase the gas supply. Water control knob: turn it clockwise to get more hot water. Water temperature ranges from 50 °F to 140 °F.
Summer/Winter Mode
This product uses LPG as the primary energy source and the enclosed combustion structure to provide uniform fire and higher burning efficiency. The switch of winter/summer mode will change the fire row to save gas.
Convenient & Exquisite Details
Exquisite devices are considered in this product: filtration mesh, standard G1/2" copper water inlet & outlet connector, gas emission tube, D-type battery cases, and tin-plated copper water tank for safe use and durability.
Quick Install & Wide Use
Instant 12 L/min gas water heater with wall-mounted design offers a relaxing shower in the bathroom while the machine is installed in the kitchen, avoiding the risk of toxic gas leakage during the bath. Perfect for outdoor camping, pet washing, RV traveling.
12L LPG Hot Water Heater
This is an excellent hot water heater, which uses LPG(Liquid Petroleum Gas) as the main energy source. When started, it will supply endless hot water anywhere. With LED current temperature display and freely adjust the water temperature by gas & water outlet knob. Multi-level protection to ensure your safety. It is compact, wall-mount, and cool in look—a must-have home appliance for your room.
Product description
The Stiebel Eltron Tempra 15 Trend Tankless Water Heater will typically use 15-20% less energy compared to conventional electric tank water heaters. Although, it’s possible to save significantly more energy depending on personal home usage habits. The difference is that conventional tank water heaters continually store hot water, and as a result, lose 15%-20% of the total energy consumed to the environment around them. This is called standby heat loss. Tank water heaters that use gas or oil are even less efficient, because they also lose heat through their vents to the outdoors. Our tankless water heaters do not need venting, and will not store hot water, waiting for you to use it. They operate on-demand to provide continuous and endless hot water when you need it, and not waste energy when you don’t. CERTIFICATIONS INCLUDE - ANSI/UL Std. 499, CSA Std. C22.2 No. 88, ISO 9001, WQA tested & certified against NSF/ANSI 372 for lead free compliance. TECHNICAL SPECIFICATIONS – Single Phase 50/60 Hz; Voltage: 240 V/208 V; Wattage: 14.4 KW/10.8 KW; Min recommended household electric service 100 A; Amperage draw: 2 x 30 A 2 x 26 A; Number and min. recommended size of circuit breakers: 2 x 30 A (DP); Number of runs and min. recommended wire size (copper): 2 x 10/2 AWG; Max. temperature rises: 65 F/49 F at 1.50 GPM, 43 F/37 F at 2.25 GPM, 33 F/25 F at 3.00 GPM; Min. water flow to activate unit: 0.50 GPM/1.9l /min; Weight: 21 lbs; Nominal water volume: 0.26 gal/1l; Max. inlet water temperature: 131 F/55 C; Working pressure: 150 PSI/10 BAR; Tested to pressure: 300 PSI / 20 BAR; Water connections: 3/4" NPT.
- CONTINOUS FLOW – Hot showers will never be interrupted again. Enjoy continuous, on-demand hot water with an unlimited supply, when you want it without wasting any energy when not needed
- SPACE & ENERGY SAVER – Its small, sleek white design saves space yet still provides endless hot water for your whole house, and no venting is required. Eco friendly unit saves energy with auto-modulation
- SILENT OPERATION – One electronic switch will activate the hot water heater and it’s noise free while in use. Digital temperature display is easy to read, while the interior solid copper heating system does all the power work
- TEMPRA 15 TREND – This specific model is 14.4kW, 240V, requires a min recommended electric service of 100 A, and offers an output water temperature of 68° to 140°F. Check our guides below to compare features of our various Trend and Plus models, each available in different kW levels
- WARRANTIES INCLUDED – Stiebel Eltron’s top-rated electric tankless water heaters perform with the highest standards for comfort and reliability. Our 7-Year Leakage and 3-Year Parts Warranties are included with purchase
User questions & answers
Question: | How can i make tempra trend 24 work with my bosch shx33a05uc/22 dishwasher? the dishwasher will not advance to next cycle. water is not hot enough |
Answer: | This water heater activates at 0.5 GPM and will heat to your set temperature at the correct flow rate for that set temperature. Please call our Technical Department at 1-800-582-8423 Ext 6 with more details so we can help you better. (for example, does the dishwasher have its own heating element, distance between the 2 units, etc...) Thank you. |
Question: | Electric panel is ~50 feet from where i want to install the tempra 29 trend. is this distance ok for #8 thhn wire |
Answer: | The recommended wire is 8/2 and there is not a limit to distance written in the install directions. You need to check with your electrician. Make sure he is state license and insured. We have installed a Tempra 29 and our electrician ran three 8/2's approx. 30' with no question. But check with your electrician and local codes. God bless you and happy New Year. |
Question: | Is there an installation kit available for this? i am installing in a remote location & plumbing parts are not available? water lines are pvc |
Answer: | There is no specific installation kit. However, we suggest using flexible braided hose connections that screw onto the hot and cold water for the first 18" or so. These connections are easy to remove to check a filter screen or if needed to work on the unit in general. The connections are 3/4" NPT. Please feel free to call our Technical Support Department at 1-800-582-8423 ext 6 with any questions. Thank You. |
Question: | Where is it made |
Answer: | We asked the Manufacturer and they replied: "These are made in Holzminden, Germany" |
Product features
1 Find your approximate ground water temperature on the map.
2 Check the column on the table to see how many fixtures can be supplied at the same time for each model.
Product description
Powerful Fan with Two Adjustable Heat Settings Equipped with two heat settings and a powerful 14" dish reflector, the Comfort Zone Oscillating Radiant Dish Heater lets you circulate air throughout your space with ease. Not only does the powerful radiant heater generate heat in small spaces, it also circulates the air with the fan to warm up cold rooms in just a few minutes. Exceptional Safety Features Equipped with an overheat protection system featuring automatic shut-off in the event of overheating, this radiant heater is safe for indoor use in residential homes. For added protection, the built-in tip-over switch shuts off the power if the unit is accidentally knocked over. Complete Control Over Air Output This oscillating radiant heater features 70-degree oscillation that circulates air throughout a small room with ease. This helps push warm or hot air to the farthest corners of your space, filling the room with a comfortable, warm breeze. The adjustable tilt can be directed up or down, allowing you to direct the air output wherever you need it. Cool-to-the-Touch Grille With a flocked safety grille that stays cool to the touch, you can easily move this fan from room to room without burning your hands. The smart design lets you transport the heater from your office or workshop to your bedroom with ease, so you can bring a blast of warm air with you wherever you need it. Just plug it in and enjoy. Versatile Design From filling your bedroom with a warm breeze on cold winter evenings to directing hot air at your pipes to prevent freezing, this versatile radiant heater offers numerous use cases. Simply plug it in and point the heater in the direction you need to circulate warm air.
- SAFE | Safety Tip Over Switch and Flame - Retardant Plastic Cabinet
- HIGH POWER | 2 Heat settings - 700 & 1,000 WATTS; Hertz : 60; Volts : 120
- SMART DESIGN | Stay-Cool Molded Handle with Adjustable Horizontal Tilt
- EFFICIENT | 14" Dish Reflector Focuses Heat Where Needed - 70° Oscillation for Full-Room Coverage
- Assembled product dimensions (L x W x H): 19 x 9.38 x 15.25 inches
User questions & answers
Question: | Is this good for an older person sitting that needs heat on them not the whole room |
Answer: | The unit can be run on High 1500 watts or low 500 watts. The Green button keeps it too warm for me. The heaters thermostat can be adjusted to 39 degrees. I heat a 532 sq ft apartment that is well insulated on the low 500 watts setting even in sub-freezing weather. |
Question: | Is it quiet or have a loud blowing sound |
Answer: | I havent measured it, but the typical low heat consumption is around 800-870W. High works at ~1460W |
Question: | Is it 9 inch or 14 inch |
Answer: | Yes it does. It is always showing the current room temperature, unless you press the button to see what your setting is at. |
Question: | where is this heater manufactured |
Answer: | I don't see why not. it is not very heavy. it does have recessed caster wheels, but you could pop them off so it does not move. Just make sure the end table your going to put it on is not the same end table worth $5,000 on the Antique Road Show. |
Latest Reviews
View all
Logitech Wireless Mice
- Updated: 11.03.2023
- Read reviews

Kneading Massagers With Heats
- Updated: 19.06.2023
- Read reviews

Laser Rangefinders
- Updated: 03.04.2023
- Read reviews

Toe Treatment
- Updated: 16.06.2023
- Read reviews

Aloe Vera Juice Brands
- Updated: 23.01.2023
- Read reviews