12 best wood stoves with blowers

Product description

The Ashley Hearth AW3200E-P is an extra large wood burning stove with 152,000 BTUs of heat. This beautiful 3/16 inch steel stove is also one of the cleanest burning, EPA certified stoves on the market (without catalyst). It's clean lines and simple design compliment many interior designs. The AW3200E-P comes with a 100 CFM blower to help distribute heat evenly. This wood burning stove features a large pedestal base with integrated ash pan and a large, arched glass door with brushed nickel door handle. The AW3200E-P wood stove meets the stringent requirements of the EPA "Step 2" 2020 Certification Guidelines. The AW3200E-P model replaces the previous Vogelzang TR007 wood-burning stove.

• 152,000 BTUs heats up to 3,200 square feet
• Heavy gauge 3/16 inch reinforced plate steel with firebrick lining for long life and combustion efficiency
• Accepts logs up to 18" - 22" in length and holds up to 30 lbs. of wood
• Includes adjustable high speed (100 CFM) blower for even heat
• Brushed nickel door handle and pedestal base provides an elegant look to any room

User questions & answers

Question:	Does this fireplace need a grate
Answer:	No
Question:	does it have a fresh air intake
Answer:	Yes, if you choose to use it.
Question:	Does it have a 6 inch flu
Answer:	Yes
Question:	Can you switch door around ? So it would open other direction?so door latch would be on the right
Answer:	No

Product description

Conveniently even heat flow throughout living space with England's Stove Room Air Blower, designed to circulate warm air over stove and around room. Features a 3 position off/low/high switch and 2 variable speeds. Easily attaches to the rear heat shield with 4 screws that are pre-installed on stove for quick, hassle-free installation. Ideal for free standing stoves models 50-SFP12 and 50-SNC13.

• Features a 3 position off/low/high switch
• Easily attaches to the rear heat shield with 4 screws
• Ideal for free standing stoves models 50-SFP12 and 50-SNC13

User questions & answers

Question:	how much air does it push
Answer:	It does push a fair amount however I also have a large fan placed behind the stove and the stove pipe blowing air
Question:	does it fit all wood stove modles
Answer:	My husband adapted the blower to fit on our All Nighter wood stove. It works fine.
Question:	What is the spacing between the bolts
Answer:	The spacers between bolts are standard size on all wood ovens
Question:	my ac-16 didn't come with mounting screws. What size to I need to mount it with
Answer:	Our application of the blower did not require screws. It was a year ago, but my husband remembers that our blower came with 3/16 1/2" long screws that would be available in any hardware store.

• Total Blower Length with guard: 9.5 in. Height: 5.25 in. Depth 3.75 in. Blower size is 9" long and 5 1/4" tall. There are 4 holes to mount. They are 8" apart left to right, and 4 3/4" apart top to bottom. This optional variable speed blower can be mounted to the back of the stove using predrilled holes to improve heat circulation. Manual variable speed switch. 110V to 120V with 6' cord. 2800 RPMS. This blower set includes: 4 Mounting Hardware Screws and 1 Heat Gasket.
• Make your wood burning stove even more efficient with this blower. When you add a blower to your wood burning steel stove, heated air from the stove will be circulated better throughout your room. This blower will allow you to heat a bigger space while using less fuel, which will save you money. And a more efficient wood burning stove means that you will spend less time going outside in the cold for more firewood.
• Fits in GHP Group, Monessen/Majestic (MHSC Brands), Majestic Dutchwest Windsor, CFM US Century Plate Steel Freestanding Wood Stove Fireplace
• Fits the models including (not completed): MHSC Windsor Series plate stoves: WR1000L02, WR1500L02, WR2000L02, WR247001, WR244, WR270007, WR300007.
• ▶︎CFM: S244E, FW247001, S274E, FW27007, FW300007, CJW1000L02, CJW2000L02; ▶︎GHP: HWS-224172MH-B , HWS-224172MH-BCA , HWS-227202 , HWS-230292 , LWS-127201-B , LWS-127201-BCA, LWS-130291-B , LWS-130291-BCA

User questions & answers

Question:	Can i hook up a magnetic thermostat to this blower? (durablow mfb ts120 fireplace stove blower fan magnetic ceramic thermostat auto switch on at 120°f
Answer:	you will have to regulate the rheostat to find the right tempeture
Question:	Will this fit a Vermont Casting Dutchwest stove
Answer:	If the back of stove has a flat tin heatsinks that a 6" x 10" fan can mount on then yes it will.
Question:	What is the max intake temp
Answer:	I have no clue. It mounts to a heat shield 1 inch off the wood stove. I would say per the stove pipe thermometer to 600°
Question:	Is the CFM only 86? and how many feet from the stove can you feel the air from the stove
Answer:	I'm not sure if CFM but depending on what fan setting can you feel the heat. We're extremely happy with our fan, it helps move the heat and has different fan settings.

Product features

The Feature of Hongso Speed Variable S31105 Blower

Dims.: Total Blower Length with guard: 9.5 " Height: 5.25" Depth 3.75", Blower size: 9" long and 5 1/4" tall

Moter RPM: 2800, Airflow in C.F.M: 86

Volts: 120, 0.5 Amps, Frequency (hertz): 60

NOTE: This blower set includes: 4 Mounting Hardware Screws and 1 Heat Gasket.

Heavy-Duty Build

• Motor UL Approved
• Energy Efficient and Long Lasting

Variable Speed

• Rheostat, UL Approved
• Allows You to Control the Speed of the Blower

Quietly Boost your Fireplace’s Output

• The blower fan can boost your fireplace’s output to heat up your home faster, increasing comfort and reducing energy costs, highly efficient in maximizing airflow at lower noise
• Noise Level: 52 dB (MAX)

• 👍Total Blower Length with guard: 9.5 in. Height: 5.25 in. Depth 3.75 in. Blower size is 9" long and 5 1/4" tall. There are 4 holes to mount. They are 8" apart left to right, and 4 3/4" apart top to bottom. This optional variable speed blower can be mounted to the back of the stove using predrilled holes to improve heat circulation. Manual variable speed switch. 110V to 120V with 6' cord. 2800 RPMS. This blower set includes: 4 Mounting Hardware Screws and 1 Heat Gasket.
• 👍Make your wood burning stove even more efficient with this blower. When you add a blower to your wood burning steel stove, heated air from the stove will be circulated better throughout your room. This blower will allow you to heat a bigger space while using less fuel, which will save you money. And a more efficient wood burning stove means that you will spend less time going outside in the cold for more firewood.
• 👍Fits in GHP Group, Monessen/Majestic (MHSC Brands), Majestic Dutchwest Windsor, CFM US Century Plate Steel Freestanding Wood Stove Fireplace
• 👍Fits the models including (not completed): MHSC Windsor Series plate stoves: WR1000L02, WR1500L02, WR2000L02, WR247001, WR244, WR270007, WR300007.
• 👍CFM: S244E, FW247001, S274E, FW27007, FW300007, CJW1000L02, CJW2000L02; ▶︎GHP: HWS-224172MH-B , HWS-224172MH-BCA , HWS-227202 , HWS-230292 , LWS-127201-B , LWS-127201-BCA, LWS-130291-B , LWS-130291-BCA

User questions & answers

Question:	I have a Consolidated dutchwest Majestic , wood convection heater. # fa264ccl Will this fan kit, fit our freestanding unit without modifications
Answer:	Does it have a hole I. The back and four screws holes? Then yes. How could I possibly know?
Question:	Whats the cfm on this
Answer:	Not sure what the cfm output is? But it does a great job on my wood burning fire box, I only run it on low and get a great amount of heat.
Question:	If my burner does not have a blower, could I cut into the firebox and simply bolt this onto the back of my burner
Answer:	Yes. As long as your stove has a jacket or second layer of metal around the firebox. You definitely do not want to blow directly into firebox.
Question:	What is the power consumption (in Watts) of this fan
Answer:	120V/60Hz, 25W Max.

Product features

The Feature of Hongso Speed Variable S31105 Blower

Dims.: Total Blower Length with guard: 9.5 " Height: 5.25" Depth 3.75", Blower size: 9" long and 5 1/4" tall

Moter RPM: 2800, Airflow in C.F.M: 86

Volts: 120, 0.5 Amps, Frequency (hertz): 60

NOTE: This blower set includes: 4 Mounting Hardware Screws and 1 Heat Gasket.

Heavy-Duty Build

• Motor UL Approved
• Energy Efficient and Long Lasting

Variable Speed

• Rheostat, UL Approved
• Allows You to Control the Speed of the Blower

Quietly Boost your Fireplace’s Output

• The blower fan can boost your fireplace’s output to heat up your home faster, increasing comfort and reducing energy costs, highly efficient in maximizing airflow at lower noise
• Noise Level: 52 dB (MAX)

Product description

The Ashley Hearth Products AW1120E-P is a beautiful air tight plate steel wood burning stove with nickel-pewter trim that accents a charcoal black finish. A heavy cast iron door with air washed ceramic glass allows a magnificent view of the burning fire that will enhance any hearth setting. The AW1120E-P wood stove meets the stringent requirements of the EPA "Step 2" 2020 Certification Guidelines. This wood stove has 68,000 BTUs that can heat up to 1,200 square feet. The Ashley AW1120E-P burns logs up to 18 inches in length while the pedestal base provides an elegant touch to any room. Here's how it works: the primary air inlet at the front of the stove ignites the wood upon start up. Once burning, the secondary air inlet at the rear of the firebox feeds air to the top of the stove through three ignition tubes directly above the wood. The result is that you have ignition, or fire, at the bottom and at the top of the wood stove which, in effect, consumes the wood. This is a very efficient method of getting the most energy possible out of the wood that you are burning. The AW1120E-P model replaces the previous Vogelzang models TR001, TR001B, TR001WS and APS1100 wood stoves.

• 68,000 BTUs heats up to 1,200 Sq. Ft.
• Firebrick lined for long life and combustion efficiency while large ash pan with brushed nickel handle makes cleanup easy
• Accepts logs up to 18" in length
• Brushed nickel spring door handle and pedestal base provides an elegant look to any room
• Blower sold separately (model CB36 or B36)

User questions & answers

Question:	Does it have a ash clean out
Answer:	yes it does
Question:	Can the pipe be routed out the wall or does it have to go through the ceiling
Answer:	Either.
Question:	What is the flue size, i.e., dimension
Answer:	A standard 6 inch stovepipe fits this stove.
Question:	Does this unit come with a heat shield in back to allow for installing unit closer to a wall
Answer:	With the stove designed as it is, you must allow a minimum 17" of clearance from the rear of the stove to the wall.

Product description

The AW1820E from Ashley Hearth Products is an airtight fireplace insert that will greatly improve the efficiency of your fireplace. The AW1820E fireplace insert meets the stringent requirements of the EPA "Step 2" 2020 Certification Guidelines. With a heavy cast iron door and a cool touch wood handle along with an air washed ceramic glass that allows a magnificent view of the burning fire, it will be a beautiful addition to your existing hearth. It includes a hearth surround to fully enclose the existing fireplace and is equipped with a spring-loaded automatic adjustment making installation a breeze. The Ashley AW1820E model replaces the previous Vogelzang model TR004 Colonial fireplace insert and the US Stove Company model 2200IE insert.

• 69,000 BTUs heats up to 1,800 Sq. Ft
• Cast iron feed door with large 16.5" x 9" ceramic glass window and heavy gauge 3/16" reinforced plate steel with firebrick lining
• Accepts logs up to 18 inches in length
• Over 75% efficient heating
• Replaces Vogelzang model TR004 and the US Stove Company 2200IE fireplace insert

User questions & answers

Question:	Can this be used with a zero clearance prefab fireplace
Answer:	For the most part, yes. But it really depends on the size of the firebox and flu
Question:	How about publishing the installation instructions so we can figure out if we have the skills to perform the installation
Answer:	Installation is not too hard. My husband who is a handyman type was able to install ours.
Question:	On the dimensions what is considered a height
Answer:	Not including the surround pieces, the base of the burner box to the top of the box.
Question:	Does this have a blower
Answer:	Yes

Product description

Get the heating appliance you want and the loading space you need with the Legend III. This very large wood stove on stylized cast iron legs is certified to the highest standards in the industry to offer a heating experience that is both powerful and eco-friendly. This model is equipped with a first quality tangential blower for better heat distribution, a superior C-Cast baffle, decorative panels to reduce clearances in addition to being suitable for installation in alcove and mobile homes.

• Recommended heating area (sq.ft.) : 2,300
• Heat output: 90,000 BTU
• Average particulate emissions rate : 0.95 g/h
• Maximum log length : 20"

User questions & answers

Question:	Should I or do I need to put a wood rack in the firebox
Answer:	Hello, No the stove is build to burn wood directly on the firebricks. Thank you.
Question:	Are the handles removable
Answer:	Yes they are individual pieces that could be removed. Thanks,
Question:	Will the blower burn out if we loose power
Answer:	The blower requires power, so if you lose power the blower will not work.
Question:	do you have to use the blower to use this wood stove
Answer:	Hello, The stove can be used without the blower. Thank you.

Product description

England's Stove AC-16 Original OEM Blower

• 120V
• 60Hz
• 0.75A
• 2900RPM

User questions & answers

Question:	Does the image properly represent the product received
Answer:	Yes. Works great!
Question:	Does the oem.blower have a thermostat on it
Answer:	No it does not, just a switch for two speeds
Question:	What metal is the housing made of? Aluminum? Steel
Answer:	I think itssteel
Question:	Is the mounting flange outer dimensions 4"? What is the distant between bolt holes
Answer:	FROM HOLE TO HOLE IS 2-1/2" THE FLANGE , AS FAR AS I CAN TELL IS 4"

Product description

How is the stove fan working?

The stove fan generates its own power by the heat from the stove. The stove fan uses thermoelectric technology to convert a temperature difference into electricity. At the center section of the stove fan base is a unique thermoelectric module. The module change the heat into the electricity.



How to use the stove fan?

Position the stove fan on a smooth flat surface of your stove top ,near the side or back of the stovepipe.The hotter the stove surface is, the more air the fan circulates.



Attention:

Recommended surface temperature is between 185F - 660F (85C - 350C). Temperatures above this range may damage the stove fan and the electricity generating units and invalidate your warranty.

Never handle the base of the stove fan, do not set the stove fan down on an unprotected surface when hot.

To move or carry the stove fan, always use the extendable handle while wearing gloves .

Keep the stove fan away from small children when in use.



What if you have questions or concerns?

Our Customer Care Team is available and ready to assist you. Simply email us with your Order# and we'll get back to you within 24 hours.



Recommend buying 2 pieces to take full advantage of the heat from the stove.

• Compact Size--8.7 x 6.7 x 3.6 inches,the material of the stove fan is aluminum.
• No Batteries or Electricity required--The stove fan uses heat from the stove surface to spin,adjust its speed automatically with the stove surface temperature.
• Longer lifetime--There is a Bi-metallic safety device in the base of the stove fan.If the surface temperature rises above around 300℃,the safety device gently elevates the front of the fan to protect the TEG and motor.
• Whisper-quiet--The only moving part is the blade assembly.You don't even know the stove fan is there,but you FEEL the WARMTH!
• Less Consumption ,More Efficiency--The stove fan will help reduce the fuel consumption and make the room warmer quickly.

User questions & answers

Question:	can you really use this with a fireplace as the title in the ad states
Answer:	I use this fan on my fireplace insert, which has a metal shelf about 8-9" wide right above the door. The fan begins to spin at 120 degrees or so, and spins fast at 320 degrees. If your stove or metal surface isn't hot enough, it won't work well, but at a reasonable heat, it moves hot air enough that it is uncomfortable to stand in front of it for long. I love the fact that it's quiet, doesn't use electricity, and warms the room.
Question:	I have this 4 years. love it. this season, the blades started to wobble and make noise. can i tighten or fix anything
Answer:	Probably the housing is becoming worn and play in the shaft Not sure if that’s adjustable
Question:	Has anybody used this on a pellet stove at lower temp settings
Answer:	The stove fan is designed to use on freestanding stoves with a normal surface temperature between 185° F - 660° F (85° C - 350° C).
Question:	I have a nice enamel finish on my stove and don't want to scratch it. Does the bottom of the base have any material on it that would protect the stove
Answer:	No it doesn’t have any bumpers or anything like that. Mine is an older stove so it is pretty tough but I haven’t had the fan move around on it’s own or anything so I’m sure if you were careful with putting it on the stove it won’t scratch.

Product description

Appalachian Wood Stove 3 Speed Blower Motor, Appalachian Item #0510-2002

User questions & answers

Question:	Does stove have yo be hot for blower to run
Answer:	No. You can trun the fan on manually. The fan will automatically go on when the stove reaches a pre-determined temp. you can set the desired fan speed.
Question:	Is this fan/ blower loud
Answer:	Not terrible , but you differently need it to get any heat from this stove !
Question:	Does this motor have an internal thermostat that will shut it off if too hot
Answer:	No it does not, but it shouldn't get too hot if the stove is not overfired.
Question:	will this replace the bc274-A
Answer:	I have the BC274 No. 7063-5807 which has a variable speed switch. If yours does as well, this would not work unless you replace the variable speed switch with a 3 position switch. To my eye this looks slightly taller than my current motor as well, though that may just be the angle of the picture, and I since I haven't ordered a replacement for mine yet (though I desperately need to soon) I also can't vouch for the angle/length of the mounting arms. Hope this helps somewhat!

Product description

The thermal switch can automatically control the on/off function of your fireplace blower fan. Can be used in universal blower kits, attaches easily and simple to replace.

TEMPERATURE RANGE: ON" AT 120℉ - Temp sensor will turn your fireplace blower fan "on" when it reaches 120 degrees Fahrenheit. "OFF" AT 90℉ - Magnetic heat sensor will turn your blower fan "off" when it reaches 90 degrees Fahrenheit.

WHEN USING AN OPTIONAL SPEED CONTROL: Simply set your preferred fan speed on the rheostat and leave it there. When the fireplace reaches 120℉ the blower will automatically turn on and run at the speed you set on your speed control.

REMINDING: Blower will not START until thermostat is heated to approximately 120 °F.

• ★ Included With Purchase - Thermostat limit switch
• ★ Universal Fit - The thermostat on/off switch used in universal wood stoves, fireplace blower kits, gas log firplaces
• ★ Very Easy to Install - The thermostat has a magnet instead of having to mount it with screws, attach the magnetic heat sensor to the underside of the firebox.
• ★ Turns On and Off Automatically - Automatically turns fireplace on and off at set temperature of thermostat switch, you don’t require manual star, adjustment, stops.
• ★ Specifications - Length x Width x Height (inch): 2.5 x 1.7 x 0.9. Temperature switch closes (turn on) at approximately 120°F and opens (shut off) at approximately 90°F (+/- 5°F tolerance)

User questions & answers

Question:	What size are the spade connectors
Answer:	Standard male terminals 1/32" thick, 1/4" wide on the switch. You need female connectors (suggest insulated) to wire up
Question:	what kind of insulated connectors did you use to withstand the heat of the stove
Answer:	The make a connector that has no plastic part it's all metal.Just crimp and maybe soldier would help.

Product description

These are designed to be replacements for the listed blower model number. The blowers are aftermarket models-not original equipment. Be sure to compare the dimensions listed, to your unit, to be sure it will fit. The blowers are"contractor kits" with no installation instructions. Intended to be installed by a qualified technician. One Year Warranty.

• Includes blower, mounting base, variable speed control, power cord with 3-prong plug
• 13" Length, Height 5.75" Width 5"
• 115 CFM, 2400 RPM, 0.92 amps 115 volts
• Thermal Switch
• 1 Year Manufacture Warranty

User questions & answers

Question:	Vermont castings sequoia uses the fk26. blower installed with the fireplace died. front opening only 4" high. must i disassemble new one to install
Answer:	I installed one for my Mom and Dad.I don"t believe I had to disassemble the entire stove. I think I did it all from the rear.If your good at remembering how things come apart its pretty straight forward. If not,it might be best to get a serviceman. I had not ever done one before and it was not difficult. I think they quoted my parents appox. 200 dollars install.I got a very good price for the blower from amazon.Hope this gives you some options.
Question:	Will this fit Vermont Castings Encore 2040? It seems to be a cross to their 2767 kit.. Thanks
Answer:	Richard, I purchased this assembly for my 2040 and it matches up to the fan and temp sensor switch mounting holes. The wiring however is misrepresented in the accompanying pics. The pics show the wiring as being insulated as it is with the original from Majestic. The wiring on this fan is not insulated. (I suspect they borrowed the pics from Majestic) I wasn't comfortable installing the new fan with uninsulated wiring so I switched the old wiring to the new fan. Considering the price of this fan vs. the OEM fan from Vermont Castings, I am satisfied with the purchase. Also worthy of note: 1) the blower wheel is plastic on the new assembly where as the wheel on the original was metal. 2) The fan speed on the new is about the same on high, but overall the variable speed is not as variable on the new as the old. 3) The fan seems to move about as much air on high speed but is actually quieter than was the original...a desirable change.Hope that helps!
Question:	Is this compatible with a Vermont casting radiance model 5078 convection blower
Answer:	I used it on a Vermont Castings Stardance and it worked. I can't say for sure about the Radiance models.
Question:	Part number matches but does it work on the Defiant
Answer:	We have a Dutch West, not a Defiant so don’t know. Works well on our stove.