10 best platform bed with rails

Product description

support your mattress with the sturdiest bed frame design Available. The unique wedge lock connectors of the Street-Lock frame become stronger as more weight is applied and can support virtually any practical weight. The center support bar is 2hes wide and made from double rail angle iron. Side rails with protective end caps and cross arms are both 1. 5 inches by 1. 5 inches. Powder coated in a stylish black matte finish. universal use This adaptable frame is designed to fit most headboards and footboards. Bolt on brackets create a secure connection for headboards and footboards that affix with bolts. This frame also includes four bolt-to-hook modification plates to accommodate hook-on headboards and footboards. These mode plates can be micro-adjusted to fit most headboards. Adjustable-height glide feet adjust from 4. 5 inches to 7 inches to allow for headboard/footboard Height matching and stabilizing. This frame is also a stronger, more stable alternative to bed Rails. the Street-Lock bed frame assembles easily in seconds with absolutely no tools. Frame features a lifetime U. S. Manufacturer's against defects and workmanship. extra long rails the side rails of this bed frame are longer than those on a standard bed frame. The structures bed frame is designed to be used with a Headboard and footboard. A longer frame makes it easier to make the bed when a headboard and footboard are attached. The extra length gives you more space at the top and Bottom of the mattress to tuck sheets, blankets and comforters down and out of sight. If you do not plan to attach a HEADBOARD and footboard to the bed frame, we suggest you purchase a frame with standard length side rails, such as the structures universal bed frame: Http: //amzn. To/2Akmqvr. Use as standalone bed frame or in place of bed rails for additional support

• Full-length bed rails with bolt-on or hook-in connection options for headboard and footboard attachment
• Stronger and safer alternative to traditional bed rails
• Protects your headboard and footboard by eliminating the pressure on them - all weight is supported by the frame
• Adjustable attachment plates and adjustable Height legs with glides allow for FINE-TUNED adjustments for use with most headboard/footboard Styles
• Lifetime U. S. protects against all defects - This is the last frame You'll ever need

User questions & answers

Question:	I have a queen bed with a full head and foot board will hook brackets adjust to accommodate
Answer:	Yes. All are the same bars just different set up.
Question:	what bed risers work with this frame
Answer:	Our bed frame can hold up to 500 lbs of combined weight, excluding the mattress weight, when using a box spring.
Question:	What is the height range of the adjustable feet
Answer:	Pretty small. A few feet tall and really skinny
Question:	I have a high bed and need a 10" height from floor to head and foot board slots. How high is this
Answer:	Our bed frame can hold up to 500 lbs of combined weight, excluding the mattress weight, when used with a box spring.

Product description

Sturdy Support

Support your mattress with the sturdiest bed frame design available. The unique wedgelock connectors become stronger as more weight is applied and can support virtually any practical weight. The center support bar is 2-1/2" wide and made from double rail angle iron. Side rails with protective end caps and cross arms are both 1-1/2" x 1-1/2". Powder coated in a stylish black matte.



Adjustable Height Glides

The six adjustable height glides allow fine tuned height matching and stabilizing, for a customized fit with your headboard and footboard. Extra wide construction offset to fit virtually all headboards.



Easy Assembly

The bed frame assembles easily in seconds with absolutely no tools. Assembled frame has deeply recessed legs that provide extra toe room to prevent foot injury.



Lifetime U.S. Warranty

Frame features a lifetime U.S. manufacturer's warranty against defects and workmanship. Available in Cal King, King, Queen, Full, and Twin configurations.



Extra Long Rails

The side rails of this bed frame are longer than those on a standard bed frame. The STRUCTURES bed frame is designed to be used with a headboard and footboard. A longer frame makes it easier to make the bed when a headboard and footboard are attached. The extra length gives you more space at the top and bottom of the mattress to tuck sheets, blankets and comforters down and out of sight. If you do not plan to attach a headboard and footboard to the bed frame, we suggest you purchase a frame with standard length side rails, such as the STRUCTURES Universal Bed Frame: http://amzn.to/2aKmQVR

• Extra-wide 2.5-inch double rail center support and full-length siderails
• 6 adjustable height legs for headboard and footboard alignment
• Easy assembly; no tools or hardware required.The frame is constructed with bolt on plates and an extra-wide offset to hook-in to virtually any headboard and footboard
• Best when used with a headboard and footboard.3 support glides
• Lifetime U.S. warranty guarantees high-quality construction

User questions & answers

Question:	Will this handle the weight of a plus sized person? The total weight of both of us is less than 500 lbs
Answer:	It’s like a towel with plastic backing. It does create a sound and you can feel a difference, too.
Question:	Can I use bunkie boards instead of box springs with this
Answer:	It's like a fitted sheet. It covers the top and sides, and has elastic corners that stretch under the bottom. It does not cover the entire bottom.
Question:	Can a trundle slide under this frame
Answer:	My Schiffman mattress has extra padding on the top and bottom. I always use two fitted, bottom sheets of high quality to cover the mattress cover. They fit tightly over the mattress cover, so I never notice the terry cloth on the mattress cover. I guess I would say it doesn't feel like a towel when I'm sleeping on it.
Question:	How high in inches can the legs be adjusted
Answer:	This mattress stays on. But make sure you know the thickness of your mattress if your mattress is to thick or to thin that will happen. I know it happened to me and it is a pain. I hope this helped you.

Product description

ESSENTIAL BED SAFETY FALL PREVENTION AID

• The Step2Bed is used in the bedroom with anyone with mobility issues to help them get in-and-out of bed safer.
• Using Motion-Activated LED Lighting to guide the way, the step2bed is unlike any product on the market!
• Able to be assembled on either side of the bed, the steel support grab bars help give piece of mind when getting in-and-out of bed. Most beds sit too high and are difficult to get in-and-out of.
• This is the PERFECT bedroom safety assist aid for seniors, elderly, disabled, handicapped, hip replacement recovery, and those suffering from back pain or other injuries.
• ADJUSTABLE HEIGHT STEP WITH NON-SLIP GRIP TAPE - height adjustment settings from 2.5"-8.0" for any size bed. Non-Slip Grip Tape helps reduce the risk of falls.
• DURABLE AND ATTRACTIVE DESIGN - The step2bed is made of Stainless Steel with a powder coating for long term use and satisfaction.
• 100% LIFETIME GUARANTEE!!!

step2bed does not attach to the bed.

• FALL PREVENTION & MOBILITY INDEPENDENCE - Step2Bed Bed Rails For Elderly help your loved ones get in and out of safely with durable, easy grab handles for extra safety and support.
• VERSATILE HEIGHT ADJUSTMENTS - ADJUSTABLE HEIGHT BED STEPS made for high beds and low beds for adults and seniors allowing users to customize to their specific needs reducing risk of falls.
• EASY STEPS - NON-SLIP, EXTRA WIDE STEP STOOL with handle holds 400lbs using Portable, Lightweight, Sturdy Steel for extra security and safety. Velcro straps provide added stability
• EXTRA SAFE - Motion Activated LED Light Guided Step Stool makes it Easy To Get In & Out Of Bed when dark and comes with floor illumination.
• 30 DAY CARE GUARANTEE - As a small business, we care about YOU & provide you with a 30 day warranty. Each Step2Bed comes with easy assembly and designed to fit on any side of the bed.

User questions & answers

Question:	Do you have to use the light bar for stability of the side handles
Answer:	Yes, the product is fully assembled. All that needs to be done is to extend the legs and lock them into position as needed. Very sturdy frame, but needs a back board to give something for the patient to lean against.
Question:	Can I purchase replacement anti-skid strips from the manufacturer
Answer:	The part that has the seat and back is the part that hangs over the bathtub. You sit on the seat and slide over into the tub. You have to swing your legs into the tub or lift the patient's legs into the tub. When the seat slides to the other side it has a clip that holds it in that position until the clip is released to slide back out of the tub (the seat slides side to side).
Question:	Does the LED light need to be plugged in or is it battery operated
Answer:	I measured as best I could with legs in highest position. The clearance below the lowest point (the sliders on the seat that connect it to the frame sit lowest) is about 19 1/2. I'd say you probably want the tub height to be below 19"...maybe 19 1/4. Hope that helps!
Question:	How does limited mobility swing their legs over lower bar? in demo video the process of getting legs over the bars is edited out=hiding problem to use
Answer:	Yes, you can make it left or right sided. When you put it together, you determine which way the seat faces which is what determines whether it is left or right sided.

Product features

Customize the step2bed to meet your needs

-Motion Activated LED Light

-Adjustable Height Step

-Extra-Wide Landing Base With Non-Slip Step

-Lightweight & Sturdy - Weight Capacity 400 lbs

-Portable

-Can Be Assembled On Either Side Of The Bed

Freestanding device that sits at the bedside

The step2bed sits at the bedside and is portable.

Motion activated LED lighting - 121' sq ft of lighting

Motion Activated LED lighting helps as you approach the step2bed to enter into the bed and also when you get out of bed.

It illuminates the step and the floor as you are using the product.

Six Different Height Adjustments

The step2bed's step adjusts from 2.5"-7.5" in height. This allows the user to customize the height of the step to meet their specific needs. Combined with the motion activated LED light, the step2bed allows you to reduce the risk of falls no matter where you are in the aging continuum.

step2bed supports 400 lbs!

The step2bed is made of steel and has been tested to support 1200+ lbs.

Safety is our biggest priority so we didn't skimp on parts and use aluminum or plastic. Making the product from steel ensures that our users will be safe when using the product.

Able To Assemble On Either Side Of The Bed

The step2bed was designed so when it's assembled it can be use on either side of the bed. This allows you to use the product in your home no matter what side of the bed you sleep on!

Product description

Heavy Duty SupportSupport your mattress and box springs with a heavy duty steel bed frame engineered to support the thicker, heavier mattresses of today. A 2.5-inch center support bar offers extra support through the middle of the bed and fulfills mattress manufacturers' support warranty requirements. Side rail angle iron steel is 1.5 inch by 1.5 inch and cross arm angle iron steel measures 1.25 inch by 1.25 inch. Floor Protection and SafetyFrame features six 3-inch reinforced glide feet designed to protect carpeted and hard floors from dents and damage.Easy SetupFrame is easy to assemble in under ten minutes and no additional tools are required. Universal headboard brackets accommodate virtually any headboard configuration. Finished with a durable and stylish gunmetal black matte powder coating. Manufacturer WarrantyFeatures a 5-year warranty that guards against manufacturer defects and workmanship. Adjustable Bed FrameFrame adjusts easily to fit the following bed sizes: California KingKingQueenFull XL Full Twin XL Twin

• Standard profile frame with 7.5" clearance
• Easily adjusts to fit Cal King, King, Queen, Full XL, Full, Twin XL and Twin box springs
• Nine legs with six 3-inch heavy duty metal-reinforced glides. Patented Tri-Support system creates optimal frame support
• Universal headboard brackets and gunmetal black matte powder coating.Total Weight Capacity:1500 lbs
• Easy assembly in under 10 minutes - no additional tools required - 5-year U.S. warranty.

User questions & answers

Question:	Do i have to buy additional pieces to attach my footboard
Answer:	This frame only supports a headboard. This is probably not what you need. I would stick with this manufacturer though... This is the strongest frame I've seen in a while.
Question:	Can you put two twin box spring and mattresses on this frame to make one big bed
Answer:	my box springs are two smaller sizes with one large mattress on top, this has a solid bar down the center with foot supports to the two box springs have support on all four sides
Question:	Can headboard and foot board be applied
Answer:	Hi Annette Calloway, thank you for reaching out to us. This frame does come with bolt on headboard attachments. If you are looking to attach a foot board you will need footboard extension brackets. We have provided a link below to where those can be purchased. If you have any other questions please contact us at [email protected]://www.amazon.com/MALOUF-Structures-Footboard-Extension-Attachment/dp/B006ZF10TO/ref=sr_1_1?s=home-garden&ie=UTF8&qid=1497630604&sr=1-1&keywords=malouf+footboard+extensionsThanks! Linenspa
Question:	Any problem with moving your bed with the roller option (4 rollers and 5 glides
Answer:	The glides are for support and long enough to touch the ground so it is hard to move even with the 4 rollers on :(

Product features

Easy Assembly

Set up frame in less than 10 minutes with no additional tools necessary.

Heavy-Duty Glides

Frame has nine legs with six 2 1/2-inch metal-reinforced glide feet.

Headboard Brackets

Universal headboard brackets accommodate most headboard configurations.

Manufacturer's Warranty

The STRUCTURES Universal heavy duty bed frame is backed by a 5-year warranty.

• Upgrade Bed Frame Design: this twin bed frame engineered with extra multiple support legs for maximum stability and squeak-free use to give you a good sleep every night
• Heavy Duty Bed Frame: build of strong metal steel for sturdy and stable support, there are plastic caps at the end of each leg to protect the floor from unnecessary scratches
• No Box Spring Needed: you won’t need a box spring when you have this bed frame, designed with a metal platform that you can rest your memory foam, latex or spring mattress directly on top of for extended mattress life
• Under-Bed Storage Space: 78.74" x 39.37" x 13.77"(L*W*H) Twin size bed frame features 11 inches of underbed space perfect for storing extra odds and ends. Plus, four legs higher than the frame rail to prevent your mattress from moving
• Easy assembly: All parts, tools and instruction are included in one packed box, set-up takes less than 40mins with a friend’s help

User questions & answers

Question:	Can one person assemble the twin bed
Answer:	Loni I would go two sizes up to get that look. It's a well made shirt but mine was a little tight. I wanted the look in the picture.
Question:	Is it sturdy ? what is the weight limit for the queen size frame
Answer:	I don't really know. I purchased the burgundy one and I love it. If you notice in the picture the Z-white sleeves are a little different. The one I bought the sleeves solid color was smaller and the lace covered most of the arm. Hope this helps.
Question:	Does this work for a boxed foam mattress
Answer:	I have a medium shirt and the sleeves are fine
Question:	Can it also fit a twin xl
Answer:	I'm 5' 2", 130 lbs. with 36D bust & I ordered a Medium. As far as the length goes, it is slightly longer on me than what you see on the model. So I would say if you want the length, then L or XL may work. Also the material is nice & stretchy, but not to the point where it is tight fitting, but definitely a flattering top. You will most likely look good in any size. Good luck!

Product description

Universal Center Support System is a heavy duty adjustable steel bed slats support system that fits between the side rails of your bed. It allows your box springs and mattress to sit on a solid foundation and relieves a lot of the weight that normally is placed on the side rails. These heavy gauge steel bed slats incorporate two adjustable feet on each bed slat giving you a total of four feet supporting your box springs and mattress. Our Universal bed slats support system exceeds the manufacturers warranty criteria. It includes four - 6" threaded feet, four 4" center posts and four top "T" posts to give you a height adjustable from 7 1/4" to 16 1/2 inch height.(If you need it to be higher please send a message through Amazon messaging service and I will be glad to send you 4 extra 4" straight sections at no extra cost.) Each support system comes with all necessary mounting hardware and installation instructions. WARRANTY IS A TEN(10) YEARS MANUFACTURER'S WARRANTY AGAINST DEFECTS FROM DATE OF PURCHASE FOR FULL REPLACEMENT FOR THE ORIGINAL OWNER. NOTE: THIS IS TO CERTIFY THAT ALL PARTS CONTAINED ARE NEW. SHOULD THERE BE ANY DAMAGE TO THE BOX, DAMAGED OR MISSING PARTS AS A RESULT OF SHIPPING PLEASE NOTIFY ME IMMEDIATELY THROUGH AMAZON'S INSTANT EMAIL MESSAGING SERVICE. IT WILL RING STRAIGHT TO ME WITH IN A FEW MOMENTS.

• NEW AND IMPROVED! Fully Adjustable to accommodate a variety of bed frame sizes from a Full, Queen, King and California King
• This mattress/box springs support system is designed for use on a wooden bed frame. Installation is easy using the pre-drilled holes in the end of the steel slat.
• Height adjustments can range from 7 1/4" inches to 16 1/2" inches and features two adjustable legs for each cross support, with two cross supports, for a total of four adjustable legs under your bed.
• Made from heavy gauge steel that has been powder coated to eliminate rust. The heavy gauge tubular steel eliminates warping, cracking, splitting and breaking as the wood slats usually will do over time.
• This support system incorporates 4 adjustable legs that gives the box springs and mattress the added support for a solid foundation as well as protects the side rails from bowing or bending.

User questions & answers

Question:	Do you think this will work with a metal foundation (like the zinus bifold) instead of a wood one
Answer:	100% acrylic By MJN on August 25, 2019
Question:	What is width they will adjust to and height they will adjust to? How many rails and how many legs do you get
Answer:	China
Question:	I have a metal frame with pre drilled holes. Do I need to buy anything additional, like nuts or bolts or washers
Answer:	It is 100% polyester but has to be hung to dry. It also has to be ironed with a pressing cloth and definitely wrinkles.
Question:	i have a iron queen size bed with rails...not a piece of wood on it except the panels...I would like extra support, would this work for my bed
Answer:	100% polyester
Question:	What are the measurements of a single slat
Answer:	Yes, you can give clothes to your friends, clothes are suitable for many scenarios, such as going out, exercising, etc.
Question:	Does it fit an ikea twin bed
Answer:	Soft
Question:	Can i fit a toddlar bed
Answer:	Yes
Question:	Does it come with the support legs
Answer:	No, they're not see through. They are a bit big.

Product description

"Classic Brands Hercules Standard Bed Frame is a black matte powder coated bed frame that can be adjusted to fit Twin, Twin XL, Full, and Queen mattress sets. The interlocking frame system requires no tools and can be assembled in minutes. The bed frame has four legs and locking wheeled rug rollers so the mattress can be easily moved and locked into place. Look for more innovative specialty sleep products from Classic Brands."

• 70" W x 60" L x 8.75" H
• Standard metal bed frame keeps your box spring in place; fits Twin, Twin XL, Full, and Queen mattress sets with a box spring or foundation (not included)
• Maintain stability and maximum weight support for your mattress set; interlocking key slot rails provide stronger support for heavier mattresses
• Black matte powder coated solid steel construction supports all mattress types and easily attaches to a headboard (headboard and brackets not included)
• 4-wheeled legs with locking rug rollers so frame and sleep system can be easily moved and locked into place.
• Ships small parcel in a compact package to easily fit through narrow doorways, hallways or stairwells
• The interlocking frame is easy to assemble in minutes; no tools required.
• 5 Star Customer Service; Available 7 days a week

User questions & answers

Question:	Will this frame work for a full xl. Seems that if it is long enough for the twin xl and can accommodate a full it should
Answer:	6.5 inches. Love this bed!
Question:	Would this fit a trundle underneath that is 71 in long? Wondering if there might be a way to adjust
Answer:	No they cannot
Question:	What is *measured* height from floor to bottom of side rails? Answers so far are from 6 to 9 inches
Answer:	The legs fold in and then it folds in half. Very easy to move around.
Question:	was it easy to slide and lock into the keyhole locks? was there a pin or part that holds it together
Answer:	No, not on my frame. I have fabric covered slats

Product description

Olee Sleep t-3000 steel slat bed frame is back with extra height. We have added 4 inches, which makes the Height to 18 inches. 18 inch high profile allows you to make full use for under bed storage, and forget the box Springs. It is just the right Height for everyone easy assembly, yet strong bed frame. Forget the weak squeaking wood slats As Well. Offering the best, just for you.

• Unique Sturdy design - The frame encloses the mattress to prevent slipping with ample under-bed space
• Easy and seamless assembly – all the required hardware and tools are included/ headboard compatible
• Product Dimensions- 76.1 x 40.1 x 18 inches
• Available dimensions for mattress and box spring : 74.5 x 38.5 inches. HEIGHT OF UNDER BED FRAME SPACE- 16.5 inch. INNER DIMENSION- 74.5 x 38.5 inch. SPACE BETWEEN SLATS- 7.0 inch. SLAT DIMENSION- 38.4 x 0.8 x 0.4 inch
• Fast Furniture delivery/ 5 year limited manufacturer warranty

User questions & answers

Question:	Will this support a memory foam mattress
Answer:	I've used this same frame (the king size) with a 10 inch memory foam mattress. It worked great even with supporting more than 550lbs nightly. To be fair though, our memory foam was thick and very firm.
Question:	What is the distance between each slat
Answer:	The slats are 8-inches, center to center, with one down the middle. We do not use box springs with our king size bed, and the mattress is well supported. I hope this helps!
Question:	What is the maximum hight of an item I can place/store under it
Answer:	15 to 15.5 inches depending on flooring ( hardwood or carpeting )
Question:	What is the weight capacity for this frame
Answer:	Significant other and I have a combined weight of over 500 lbs. The frame never even squeaks, no matter what we're doing.

Product description

The Boyd Sleep Finnish raised platform bed frame base is a metal mattress foundation with adjustable arched hardwood slats which supports your entire mattress while offering added flex. It's designed to be used independently or to fit inside most traditional bed frames, eliminating the need for a box spring. The unique dual slat system provides adjustable support that is superior to a traditional metal bed frame. Double slats in the three lumbar rows provide extra support where the most weight is placed and allows you to easily adjust the firmness or plushness by moving the sliders farther apart or closer together to customize your comfort level. This bed base provides a stable and quiet platform and features center leg supports help prevent mattress sagging and increases the life of your mattress. With 14" of clearance space from the floor to the bottom of the side rail, this mattress foundation offers added storage space underneath your bed. The Boyd Sleep Finnish raised platform bed frame base assembles in minutes with no tools needed, and is compatible with innerspring/coil, memory foam, latex, and hybrid mattresses (sold separately). Includes a limited 1 year manufacturer warranty.

• Raised platform bed frame base supports your entire mattress, eliminating the need for a box spring
• Adjustable arched hardwood slats allow for customized firm/plush levels by moving the sliders; Center leg supports help prevent mattress sagging
• With 14" of clearance space from the floor to the bottom of the side rail, this mattress foundation offers added storage space underneath your bed
• Designed to be used independently or to fit inside most traditional bed frames; Measures 74" L x 53" W x 14" H and supports up-to 1,200 lbs
• Assembles in minutes with no tools needed; Compatible with spring/coil, memory foam, latex, and hybrid mattresses (sold separately)

User questions & answers

Question:	For the King--what are the dimensions of the packaging-unassembled diminesions
Answer:	It came in a long narrow box -- cant find the tracking number so no exact dimensions; probably 8 inches by 8 inches and 85 inches long?
Question:	How width is the slats are
Answer:	The slats are 2" wide with about 2 3/4" spacing between each slat. It's a great bed. Very simple and quick to put together. Liked it so much I just bought a second one. Also the legs are 12" high so plenty of room under and its normal height with a mattress.
Question:	Would this be good for a memory foam mattress? Does anyone know the max weight limit
Answer:	I have two of the frames in my house both with memory foam mattresses on top (a 8" and a 12" memory foam) and it functions just fine with them. These frames are rated at 1200lbs.
Question:	What is the height of this Cal King platform? I have a 14" mattress
Answer:	12" of clearance underneath. 13" from floor to top of frame, 14" tall from floor to top of slats.

• STRONG SUPPORT FOR BEDS: Patented X-System keeps bed frame legs vertical and in place, preventing them from sliding out of position. All-steel cross rails combined with heavy-duty super clamp and X Support provide the ultimate in support for your bed, foundation, and bedding. Stronger alternative to bed slats. No more sagging mattress!
• UNIVERSAL FIT: Suitable for Full / Double, Queen, King / Eastern King, and California King size Beds. Works with Mattresses, Box Springs, and Foundations. Compatible with steel, iron, metal, and wood bed frames (bed frame not included).
• EASY TO USE: Clear, uncomplicated instructions are included. Pre-drilled holes allow you to easily secure the cross slats to your bed using the included screws.
• ADJUSTABLE HEIGHTS: Easily adjusts for bed heights as low as 6 inches up to 15-1/2"tall. For use with headboards (Not Included), footboards (Not Included) and side rails with lip (Not Included).
• FAMILY OWNED IN THE USA: Glideaway is a family-owned company that has been dedicated to providing value-based and innovative sleep products to their customers for over 50 years.

User questions & answers

Question:	Can I use this without a box spring and just lay my mattress on top? Fo I need dlats or a box spring in conjunction with this product
Answer:	Thanks for your inquiry. The product needs to be used with a box spring.
Question:	Can this system be used under the "plastic boxes" on which a sleep number bed mattress rests
Answer:	I would still put at least a layer of wood between the support frame and the mattress. I bought 1x10 yellow pine at Loews and covered the frame making sure the wood rested firmly on the bed frame as well. I used a regular sealy queen. I felt it gave the mattress solid support. I have a sleep number bed myself now. Because they are such an expensive unit, I wouldn't risk damaging the mattress. By the way, I got rid of the frame (nothing really wrong with it though) and went with the support unit with sleep number - the kind that can raise the foot and head. My back has been happy since. But I would never just put the sleep number unit on this frame without some other support - either the pine boards or plywood (3/4). Good luck.
Question:	Can these be screwed in directly to the wooden rails? do i need to add a bunkie board for additional support even though i have box spring
Answer:	If you have a box spring no bunky board is required. I mounted my X-support system to the wooden rails that used to support the wooden slats on my bed. Used 6 wood screws to do the job, 3 to a side. My mattress is a heavy king and there are 2 box springs to support it. It all works well, no additional support needed.
Question:	I have a bed with metal side rails -- will this work with an all-metal frame? One reviewer says it won't, but the product description says it will work with both a metal and wood side boards. What's the story
Answer:	This is a bit of a mixed answer - It CAN work with just about any metal frame, but it will be a lot easier with some frames compared to others. The support does include the necessary hardware to bolt to a metal frame.The tricky part is that with a wood frame, you simply screw the cross rails down where they rest. Most metal frames will have some holes pre-drilled in them along the rails, but the support may not perfectly line up with all of those holes since it has a fixed spacing between cross rails.With a metal bed frame, the options usually are:1) Rest the "lip" of the cross supports on the inside of your bed rail. Bolt down as many holes as will line up, leave the others resting. This isn't the most secure option, but will still provide good support.2) Drill 1/4" holes in your bed frame using a bit made for metal which will line up with the ends of the cross supports, so you can bolt down all six points.Using this with a metal frame is definitely possible and will provide good support, but it won't be quite as easy as using it with a wood frame.If your metal frame already has some pre-drilled holes, you may want to look at a support such as the Mighty Lift FQU-11 which doesn't have a fixed spacing - This will let you line up the cross rails with the pre-drilled holes.

Product features

Revolutionary X-Brace Center Support for your Bed

The revolutionary X-Brace system center support system is designed to be easily installed and help support your Full, Queen, King, or California King sized bed. Using the included legs, you can assemble this support system to adjust from heights as low as 6 inches, all the way up to 15-1/2 inches in height (measured from the floor to where the bottom of the box spring rests.)



This unique center support system provides superior coverage under your bed to evenly support the box spring and mattress. The revolutionary X-System design creates a special synergy which adds an extra dimension of support to protect your bed and bedding, so you can protect your bedding investment and ensure a great night sleep.

 

The legs of this support are easily adjustable to allow a wide range of height, accommodating almost any bed configuration. The support system also adjusts in width to fit Full, Queen, King, and California King sized beds.

 

Heavy-Duty Support for your Bed

Easy and Quick Installation

Universal Compatibility

The X-Brace  Adjustable Center Support System is designed for use with wooden frames and is a great way to ensure your rails will not bend or break.