13 best commercial mop handles

Product description

The Rubbermaid Commercial Invader Side Gate Wet Mop Handle makes removing and replacing floor mop heads easy and efficient. The fiberglass handle has a length of 54 inches, good strength-to-weight ratio, corrosion resistance and a yellow plastic side gate style connection for use with a wet mop with a one-inch headband (sold separately). A floor mop headband can slide into the side gate, and then be tightened with the thumb wheel for a firm connection between the handle and mop head. This handle is suitable for use in commercial and industrial applications.

• Easily remove and replace mop heads for efficient cleaning
• Side gate makes wet mop head connection effortless
• Fiberglass construction is corrosion resistant for a long lasting product
• Compatable with one inch headband mop heads
• 54 inches in length

User questions & answers

Question:	I just got this mop handle and can not turn the screw to open it. Any suggestions
Answer:	Yes. I believe one (possibly two) grey reusable microfiber mopping pads were included. This surprised me, as no pads were listed in the description.
Question:	is there a way to use this head to squeeze water our of the mop? How do you work the "bar"? I had a tough time getting the mop into the opening
Answer:	The single sided mop sticks to the mop frame with Velcro. The double sided mops do not work with this unit. They are meant for a system that is used with a special wringer. This mop is easy to fill and works well and cannot be used in a mop bucket and wringer. The mopheads remove easily for washing and last a long time.
Question:	Can the handle be stored outdoors
Answer:	I'm still confused, > $100 for a glorified wet mop? For $100 plus, a mop better do the work while I sit on the couch, lol.
Question:	How do you open the bar? How do you get the clamping mechanism to screw down for a mop head
Answer:	Thank you for choosing Rubbermaid Commercial. Our goal is to provide our customers with the highest quality and service. Rubbermaid Commercial HYGEN Mop Quick-Connect Frame, 11", Yellow, FGQ55000YL00 can be used with FGQ82000BL00

Product description

The Rubbermaid Commercial Gripper Wet Mop Handle makes removing and replacing floor mop heads easy and efficient. 60 inches long, this gray fiberglass mop handle has a good strength-to-weight ratio, corrosion resistance and a yellow plastic gripper clamp style connection for use with a wet mop with a 5-inch headbands (sold separately). A floor mop headband can clamp into the gripper clamp, and then be tightened with the thumb wheel for a firm connection between the handle and mop head. This mop handle is suitable for use in commercial and industrial applications.

• Easily remove and replace mop heads
• Gripper clamp makes wet mop head connection easy
• Fiberglass construction is corrosion-resistant
• For use with 5-inch headband mop heads
• 60-inches in length

User questions & answers

Question:	could this be used with a towel instead of mop head
Answer:	Thank you for choosing Rubbermaid Commercial. Our goal is to provide our customers with the highest quality and service. This mop head has limited launderabilty. It can be hand washed or take up to 50 launderings
Question:	can this mop handle fit 2 mop heads
Answer:	Thank you for choosing Rubbermaid Commercial. Our goal is to provide our customers with the highest quality and service. The Universal Headband Blend Mop size is #24. It is 20.875" L x 6" W from the headband.
Question:	Does the mop model fgh24600gy00 include a yellow gripper along
Answer:	Thank you for contacting Rubbermaid Commercial Products. We strive to give the highest quality of customer service. This item is a mop head, not a wig.
Question:	so is the whole stick really fiber glass with the model H246 not H226 aluminum
Answer:	Thank you for your interest in our products! The replacement refill cartridge for the Rubbermaid Commercial Light Commercial Spray Mop is 3486110.

Product description

The Rubbermaid Commercial Invader Wet Mop Handle makes removing and replacing floor mop heads easy and efficient. 60 inches long, the hardwood handle has a good strength-to-weight ratio, corrosion resistance and a yellow plastic side gate style connection for use with a wet mop with a 1-inch headbands (sold separately). A floor mop headband can slide into the side gate, and then be tightened with the thumb wheel for a firm connection between the mop stick and mop head. This mop handle is suitable for use in commercial and industrial applications.

• Easily remove and replace mop heads
• Side gate makes wet mop head connection easy
• Hardwood construction offers durability
• For use with 1-inch headband mop heads
• 60-inches in length

User questions & answers

Question:	Is this the full mop with the metal head clamp, or is it just the wooden stick? Not sure if what they call "mop head" here is the rag or the clamp
Answer:	mop head, handle and ONE wet pad, it says. But I have not purchased.
Question:	Can you clip a thick piece of cloth or a towel instead of the mop head
Answer:	Take the pad off and rinse in a bucket or replace with a clean pad.
Question:	How does this handle clamp down to hold the mophead in place
Answer:	My cleaning solution is 1/3 white vinegar with softened water, which is anti-microbial and as effective as pine sol but far safer. With the vinegar solution, no extra cleaning is needed. I have cats and dog. If you must use pine sol, I'd definitely follow with a clean water washing to remove residue especially for safety of animals and children. Remember that dogs and cats' sense of smell is up to 10,000 times more sensitive than humans! Imagine how awful pine sol might smell to them and how that intense smell would interfere with their ability to use their sense of smell, which is their primary sense, similar to how humans rely on sight.
Question:	What size mop head do you use with this
Answer:	Thank you for choosing Rubbermaid Home Solutions. Our goal is to provide our customers with the highest quality and service. No Rubbermaid does not test on Animals.

Product features

Rubbermaid Commercial 60 Inch E-Z Change Wood Traditional Wet Mop Handle (FGH516000000)

The Rubbermaid Commercial Easy Change Wet Mop Handle is sturdy and long-lasting. Invader Side Gate Handle’s thumb wheel clamps the mop firmly in place; should be used with 1" (2.5 cm) headband mops only.

• Product Length: 60.00 in
• Product Width: 7.00 in
• Product Height: 60.00 in
• Product Weight: 31.00 lb

Product description

The Rubbermaid Commercial Invader Wet Mop Handle makes removing and replacing floor mop heads easy and efficient. 60 inches long, the blue fiberglass handle has a good strength-to-weight ratio, corrosion resistance and a yellow plastic side gate style connection for use with a wet mop with a 1-inch headbands (sold separately). A floor mop headband can slide into the side gate, and then be tightened with the thumb wheel for a firm connection between the mop stick and mop head. This mop handle is suitable for use in commercial and industrial applications.

• Easily remove and replace mop heads
• Side gate makes wet mop head connection easy
• Fiberglass construction is corrosion-resistant
• For use with 1-inch headband mop heads
• 60-inches in length

User questions & answers

Question:	How do you replace this mop head on this handle
Answer:	They are not as wide as the pad on the Rubbermaid and there isn't enough Velcro to use 1-1/2 pads dependably. Hope this helps. I am a Rubbermaid convert from Swifter. I prefer the washable pads and being able to refill the bottle.

• HIGH-QUALITY CONSTRUCTION: Meeting all of your mopping needs for years to come, the Alpine Industries Commercial Quick-Change Mop Handle is expertly crafted of iron metal to create a durable, long-lasting handle.
• QUICK-CHANGE DESIGN: You can easily make quick and easy mop changes without the mess. Outfitted with a convenient side release, simply pull up on the lever and the mop head will effortlessly slide off.
• COMPATIBLE HANDLE: Providing a tight and secure clamp down, this handles features a thumb wheel to hold the mop head firmly in place. It’s designed for use with string, looped and microfiber mops.
• IDEAL LENGTH: Furnishing a sufficient length so you can easily reach those unattainable areas without having to bend, stretch or stoop, Alpine Industries’ Commercial Handle measures 55 inches in length.
• WARNING: This product can expose you to chemicals including lead and Di(2-ethylhexyl)phthalate (DEHP), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

User questions & answers

Question:	Does this fit a 21 qt bucket
Answer:	Yes
Question:	What size mop head does this accept? will this one work: 24 oz loop-end cotton string mop head, heavy duty string mop refills, 6 inch headband
Answer:	Yes, it will easily hold a 24 or 32 oz. mop head.
Question:	This black clip on for the mop, is thos for a regular mop or for the long flat rectangular style mops
Answer:	I use it for the long flat mops that slide in and you clip them and tighten up.
Question:	I’ve seen various complaints about the quick change lever (plastic)...is this one metal or plastic
Answer:	It is plastic. I bought this for work (sub shop) And we have not had any problems with it. I have to say that thus mop stick has out lasted the metal one we had..

Product features

Long-Lasting Use

Perfect for all of your mopping needs, the Alpine Quick-Change Mop Handle is expertly constructed using lightweight, durable fiberglass to provide ease of use while ensuring long-lasting performance. This professionally designed sanitation tool supplies a quick and convenient solution, made with sturdy material for stability and a ribbed top to provide a secure grip when cleaning.

Secure Attachment

Reliable and easy to load, the handle holds all types of wet mops securely. It’s suitable for use with string, looped and microfiber mops, accepting both wide- and narrow-band styles with ease. Once you’ve placed the mop head on the handle, simply tighten it by using the thumb wheel to securely hold it in place.

Side Lever

Now you can easily switch out mop heads without the mess! The convenient design of this Quick-Change Fiberglass Mop Handle boasts a side release to facilitate fast and easy changes. Simply pull up on the release, and the mop head easily slides off the handle.

55-Inch Length

No more stretching uncomfortably while you mop the floors. Alpine Industries’ Commercial Mop Handle boasts a long length of 55 inches, allowing you to effortlessly reach those unattainable areas without bending or stooping. Happy mopping!

Light Cleaning Tasks

Used for light janitorial and cleaning tasks, this mop handle is ideal for both home and professional use. It’s the perfect choice for weekly routine clean-ups, keeping the floors in your home or at your facility sparkling and spotless.

Easy Storage

When finished with your mopping tasks, you can easily store the mop away. The 55-inch long handle is outfitted with a built-in hole, making it easy for you to store on a hanging hook. Hang it in a closet, laundry room or utility room for easy access and future use.

Product description

Rubbermaid Commercial FGM136000000 60-Inch Snap-On Vinyl-Covered Hardwood Dust Mop Vinyl-Covered Hardwood Handle. Made of hardwood covered with vinyl to improve ease of sanitization. Spring-loaded clip for attaching to Rubbermaid Snap-On dust mop frames (sold separately). Features swivel joint for flexible maneuverability. Includes a sliding collar for locking the handle into one position. Dimensions: 65.688 inches long by 1 inch wide by 1.125 inches high. 2.25 pounds. Imported.

• Vinyl-covered hardwood handle
• Easily sanitized
• Snap-on
• Spring-loaded clip easily attaches to the Snap-On Dust Mop Frame
• Sliding collar locks the handle into position or swivels a full 360°

User questions & answers

Question:	Is the clip section of the handle metal or plastic
Answer:	It has a metal clip, there is a thick sturdy plastic piece in between the wood handly and the metal clip. This piece will lock the metal clip from moving side to side. This handle seems to hold up pretty well. We have two dogs and have to dust mop all the time.
Question:	Does this fit your basic "industrial" type dust mops? Does it have side to side motion as well? I have one that move front to not side to side
Answer:	Thank you for choosing Rubbermaid Commercial. Our goal is to provide our customers with the highest quality and service. The Rubbermaid Commercial FGM116000000 60-Inch Snap-On Dust Mop Handle only works with the Snap on wire frames such as the M2570. Sliding collar locks the handle into position or swivels a full 360°.
Question:	Does this fit the rubbermaid kut-a-way 24 mophead/frame? thanks
Answer:	Thank for your interest in our products! The Rubbermaid Commercial Snap-On Dust Mop Handle FGM13600 does not fit the Kut-A-Way® Mop.
Question:	How wide is the clip section? Our mop frame can accomodate a max of about 2.5" wide. Thank you
Answer:	The widest part of the clip is 2.75 inches. The widest part is under the bar that it clips to. Around the bar it is 2.5 inches and right above the bar it is 2.75 inches again.

Product description

Cotton Wet Mop is ideal for light or heavy jobs. Lightweight 15/16" x 60" natural wood handle will not rust. Mop includes a 24 oz. mophead made from absorbent, natural four-ply cotton yarn for damp mopping and scrubbing efficiency. Refillable mophead is made with a high percentage of recycled material.

• Ideal for light damp mopping or heavy-duty scrubbing jobs
• Includes 24 oz. absorbent, 4-ply, cotton mophead
• Sturdy, lightweight, natural wood handle
• Made with recycled content
• Length: 60"

User questions & answers

Question:	Is this mophead washable
Answer:	Yes i use them with waterless urinals.
Question:	are detailed instructions for assembling available
Answer:	No only in urinal
Question:	what material is it made of
Answer:	Make sure it is flat side down. Ours do not move
Question:	Does this come with the handle and a mop head
Answer:	This will last about 30 days, we currently use it in a country club setting for more than 12

Product description

An Commercial Side Gate Wet Mop Handle makes removing and replacing floor mop heads easy and efficient. The Long Steel handle has a length of 54 inches and yellow plastic side gate style connection for use with a wet mop with a one-inch headband (Mop is not included). A floor mop headband can slide into the side gate, and then be tightened with the thumb wheel for a firm connection between the handle and mop head. This handle is suitable for use in commercial and industrial applications.

• 6-pack of 54 inch mop handles for commercial and industrial cleaning jobs
• Metal handle with heavy-duty plastic components; bright yellow mop holder for noticeability
• Easily interchange worn out or dirty mop heads with new heads
• Side gate closure and clamp keeps mop head firmly in place and secure
• Durably built for daily cleaning jobs both large and small
• Compatible with 1 inch headband mop heads

Product features

Quick Change Mop Handle

Perfect for commercial properties where on-site housekeeping and maintenance are present, the mop handle offers efficiency and durability that lasts.

Quick Change Head Clamp

imply unlock and position the new head’s seam inside the mechanism, and re-clamp for ultra-secure, great results.

Tackle Jobs of All Sizes

From factory floors to commercial kitchens, small businesses and much more, the handle delivers strength and durability in design.

Built with Quality Materials

Made of resilient metal with heavy-duty plastic components, the AmazonCommercial mop handle is built to last.

• BEST VALUE: 3 pack of 56 inches quick-change stainless steel handles PLUS 3 mop heads; suitable for home, commercial and industrial applications.
• Side gate makes it easy to remove or replace mop heads.
• Thumb wheel for screwing center bar up or down to release mop head or clamp it down.
• Mop heads made from super absorbent natural cotton synthetic blended yarn for commercial industrial use. Durable, machine washable and long lasting.
• Double loop-end construction of mop head keep mop ends from fraying.

Product features

Quick Change Mop Handle with mop head, 3-pack

The long durable mop handle allows for cleaning floors from a standing position—no need to scrub on hands and knees. Made of durable metal, the handle helps ensure an ideal combination of both optimal pressure and extended reach.

Side Gate for fast easy changes

The handle includes a side gate for easily removing and replacing mop heads. Simply open the latch, slip a mop head into position, and then clip the gate tightly closed.

Thumb Wheel to hold mop tightly in place

The thumb wheel can be screwed up or down to help release the mop head or to tightly clamp it down into place.

Product description

The Rubbermaid Commercial Quick-Connect Straight Extension Handle features lightweight aluminum construction for improved productivity. The one-step connecting mechanism speeds mop assembly and changeover, and the user-friendly grip makes the Rubbermaid handle more comfortable to use.

• Made of aluminum with stainless steel fasteners
• Extends handle up to 72"
• Works with the Quick-Connect system
• Handle end covered with rubbery material for traction
• The Rubbermaid Commercial Quick-Connect Straight Extension Handle features lightweight aluminum construction for improved productivity. The one-step connecting mechanism speeds mop assembly and changeover, and the user-friendly grip makes the Rubbermaid handle more comfortable to use.

User questions & answers

Question:	Does Rubbermaid make an angled broomhead to attach to one of these handles. I purchased the mop head for this because I don't have much space
Answer:	Thank you for choosing Rubbermaid Commercial. Our goal is to provide our customers with the highest quality and service. No Rubbermaid Commercial WaveBrake Mopping System Bucket and Side-Press Wringer Combo, 35-quart, Black (1863896) does not have a drain plug, but our 44 qt buckets will.
Question:	I have this handle (fgq76000). do you have a duster that attaches
Answer:	The wringer is very good indeed with minimal force. You can get different types of mop heads as well so you should choose one that doesn't retain as much fluid as well like the flat ones rather than rope-like ones.
Question:	how do you extend the telescoping handle
Answer:	Caution, before you order, please: Read the description for EACH color—they aren't actually the same products. The yellow 35 qt shown is ~ $64 but includes no “dirty water bucket”. However, the black unit is ~ $108 & its specs imply the dirty water bucket is included. Some colors “will fit” the dirty water bucket but it’s not included. Some colors “will not fit” the dirty water bucket. Also the black unit wrings ~ 50,000 times while some colors wring only ~ 40,000. The dirty water bucket itself costs ~ $36 but it’s not clear that Amazon itself sells it. If you thought you were getting a clean water bucket with a dirty water bucket & didn’t—complain to Amazon as soon as your shipment arrives. Rubbermaid & Amazon should fix this page so folks know what they are getting for their money. Buyers shouldn’t have to compare or memorize product numbers or guess why costs vary from $64 vs $108. Hope this helps.
Question:	Is this handle 25mm
Answer:	Thank you for choosing Rubbermaid Commercial. Our goal is to provide our customers with the highest quality and service. We apologize for any inconvenience that you've experienced with your Commercial Invader Side Gate Wet Mop Handle. So that we may gather further information regarding your specific concern, please contact our Consumer Care Department at 800-347-9800. Hours are Monday - Friday 8:00AM - 5:00PM EST.

Product features

About Rubbermaid Commercial Products

Rubbermaid Commercial Products, headquartered in Winchester, Va., is a manufacturer of innovative, solution-based products for commercial and institutional markets worldwide. Since 1968, RCP has pioneered technologies and system solutions in the categories of food services, sanitary maintenance, waste handling, material transport, away-from-home washroom, and safety products. RCP, an ISO 9001:2000 manufacturer, is part of Newell Brands global portfolio and continues to develop innovative products.

Product description

This replacement commercial mop handle is built to handle the harshest environments. Made out of sturdy aluminum, this height adjustable (from 42” to 72”) replacement mop handle will help you tackle any job. With the quick-change Flip Grip Clamp, you won’t have to get messy when you want to change out your mop head. Instead, just pull up on the release, and the mop head is free to change. Designed to work with both narrow and wide headbands (Max Width: 6 1/8”). Easily store your mop away when you are finished. With both the height-adjustable handle and the built-in hole located at the top of the handle, you are sure to find a spot to store this mop handle. Product Details: Handle Height: Adjustable from 42” to 72” Material: Aluminum Max Mop Headband Width: 6 1/8” Country of Origin: USA

• Adjustable Height: Simply twist the handle to adjust the height from 42” to 72”.
• Commercial-Grade Mop Handle: Made from aluminum, this mop handle is designed to last.
• Quickly Change Mop Heads: The sturdy Flip Grip Clamp makes quick work of replacing the mop head.
• Use Your Existing Mop Heads: The clamp on our mop head is designed to work with both narrow and wide headband (Max Width: 6 1/8”) mop heads.
• Handle Made in USA

Product description

An Amazon Brand

• 35-quart mop bucket and side-press wringer combo for cleaning floors or mopping up messes; designed for commercial use
• High-efficiency side-press wringer works with fan mop holders; down-press wringer works with fan and jaw mop holders; wringers quickly send water back down into bucket
• Made of durable polypropylene; measurement marks (in 5-quart increments) run up the inside wall of the bucket
• Loop carry handle; integrated pour handle; 4 smooth-rolling casters for quiet, convenient mobility; bright yellow color for easy visibility and added safety
• Mop-handle clip-on holder keeps mop upright in bucket; mop not included

User questions & answers

Question:	Would this make a good 25th anniversary gift for the old ball and chain
Answer:	It's loose but very easy to assemble. Just run the lock nut up towards the top of the handle and put half of the mop through the bottom and tighten the nut with your fingers. It is very easy and goes together fine.
Question:	what is the little yellow clip for that was loose in the package
Answer:	Awful
Question:	One caster lost between houses. How can I order a single caster
Answer:	It comes with handle, but far from securely! Buy another! I went back and bought the metal version and much prefer it.
Question:	Is there a dirty water insert available or does rubbermade insert fit
Answer:	Cotton ! And a great mop I really like it

Product description

Spring Grip Metal Head Mop Handle for Most Mop Heads

User questions & answers

Question:	Does this mop mechanism grip a towel as well as a commercial mop head
Answer:	It’s the standard width. You can put the heavy duty mop heads.
Question:	how wide is the clamp on boardwalk bwk 609 mop handle
Answer:	The clamp wraps around the handle, beware it is very difficult to open and close, it's a finger pincher
Question:	If you have to go under furniture, does the metal scratch the floor
Answer:	Yes, the mops were of good quality with good solid handle