7 best 60 wall mount

Product description

The MW340B2 is a low profile full motion TV wall mount. Made to be mounted into double studded walls for extra rigidity, two articulating arms added strength to safely support today’s newer, thinner TV. Designed for TV with 100 x 100mm to 400 x 400mm mounting hole pattern, and the mount holds up to 100 lbs, mounting to 16” dual stud, single stud or solid wall.The MW340B2 low profiles mount with a flat depth of only 2.3 inches, you will have a very sleek, against the wall design. It also can extend out 14” for easy access, swivel and tilt to give any seat in the house the perfect viewing angle. Notice: This mount fits most 32-65 inch TVs (VESA hole patterns from 100x100 mm (4x4") to 400x400mm (16x16") ), do not work for some old size 50-65 inch TVs manufactured before 2013.

• Fit 32" 37" 40" 42" 46" 47" 50" 52" 55" 60" 65" Display with VESA up to 400x400mm(16"x16")
• Steel construction, supports TV up to 100 lbs., Mount to wood wall studs up to 16" on center.
• Low profile 2.3”, Maximum pull out 14.5”; Adjustable tilt 15 degree forward or 5 degree backward; Swivel 130 degrees
• Lift n’ Lock makes installation a three step process
• Bonus 6 feet HDMI cable. Common hardware pack included in the package

User questions & answers

Question:	what do you do If the place you want to mount it has studs that aren't center to where you want to put it
Answer:	The oak board may look best but the standard for mounting is for 3/4 inch plywood. Why? Oak will tend to crack and split with forces applied to it over time because the grain all runs in one direction. Plywood on the otherhand is made by puttins many stacks of thinner wood together with the wood grain alternating between each sheet. This is strongest and resists cracking. . As far as the size of the backing. well depends on your studs. If you have metal studs they are 24 inch center to center. You will need it to be at least that long. Wood studs are closer and 16 or 18 inch cuts should do the trick
Question:	Any reason this won't work with a larger (79") TV? The VESA pattern works and the weight is <165 lbs
Answer:	While the weight limit and bolt pattern may match, the one difference I see between this mount and ones rated for larger Tv's is the wall side of the mount. This one has a 2.5 inch profile, whereas higher rated mounts have a 16" wide profile with more screws. I haven't tested it, but would imagine if the tv were at full attention to the left or right it may snap the screws if it were too large (too much leverage on such a thin profile with 3 mou ntikmg screws). But if the tv stayed straight out from the wall As long as the weight limit is observed it would work fine (at own risk) the arm is certainly strong enough.
Question:	screws
Answer:	Did not come with screws to hand Samsung 49" 4k TV. It needed M8 45.
Question:	Does it have a quick release mechanism? I want to use this on an outdoor patio. I need to be able to remove and install the TV with ease as needed
Answer:	Theoretically yes, but it's a bit of a pain. The plate attached to the TV has a slot which slides over a tab on the wall mount, which is a type of quick release. As Curtis Busch's review states, there are screws to secure which can be hand tightened.The caveat is that the slot which holds the tab is very nearly the same size as the tab (almost no wiggle room). Therefore getting the slot over the tab and secured requires good aim or a lot of trial and error. Not too bad with a smaller TV, and where there is good sight line to visually align the two. In my case, a 48" TV being mounted into a recessed cabinet proved to be frustratingly difficult for one person. For my sanity and safety of TV I had to get some help.Many other manufacturers instead use a hook on the TV bracket which can be very easily placed over the top edge of the wall bracket. No real aiming. Kind of like a grappling hook on the edge of a building. I've hung 5 other TVs using that type of system (Sanus brand) and it's MUCH easier and can easily be done by one person.

Product features

Full Motion Tilt Swivel Articulating TV Wall Mount MW340B2

The MW340B2 is a low profile full motion TV wall mount. Made to be mounted into double studded walls for extra rigidity, two articulating arms added strength to safely support today’s newer, thinner TV. Designed for TV with 100 x 100mm to 400 x 400mm mounting hole pattern, and the MW340B2 holds up to 100 lbs, mounting to 16” dual stud, single stud or solid wall. The MW340B2 low profiles mount with a flat depth of only 2.3 inches, you will have a very sleek, against the wall design. It also can extend out 14” for easy access, swivel and tilt to give any seat in the house the perfect viewing angle. Notice: This mount fits most 32-65 inch TVs (VESA hole patterns from 100x100 mm (4x4") to 400x400mm (16x16") ), do not work for some old size 50-65 inch TVs manufactured before 2013.

Product description

The Pipishell Articulating TV wall mount has been designed with strength and versatility in mind. The ultra slim design allows the TV to be folded flat against the wall when pushed back and then from a central position can be extended outwards maintaining its centralised position, tilted and turned in any direction you require.

Will the TV wall mount fit my TV?

First, please check your wall for wood studs, it cannot be used on concrete wall or drywall alone. Anchor needed is for concrete wall installation.

Next, the weight of your TV should be less than 132lbs (60kg).

Then, mounting holes distance on the back of TV must be less than 24" (600mm) horizontally and 16" (400mm) vertically.

Your TV should be at least 37 inch. Otherwise, you will see the bracket.

In addition, please check the area inside the 4 mounting holes to make sure there are not any plugs. Otherwise, the plate may block the plugs.

Finally, please check possible blocked cable/input.

Specifications:

• Fits 37" to 70" flat panel TVs
• Supports TV weight up to 132lbs / 60kg
• Fits VESA mounting hole patterns: 200x100/200x200/300X200/300x300/400x200 400x300/400X400/500x300/600x200/600x400
• Tilt adjusts 12 degrees forward or 3 degrees backward
• Swivel up to 60 degrees
• Extends up to 15.4" and folds 3" from the wall to save space
• Wall mounting studs distance up to 16"
• Rotate 3 degrees for perfect TV level adjustment

Package includes:

• 1x TV wall mount
• 1x Standard mounting hardware
• 1x 3-Axis magnetic bubble level
• 5x Cable ties
• 1x User manual

• ✅ ULTRA STRONG TV WALL BRACKET - Our TV wall mount is constructed from high quality steel materials and fits most 37-70" TVs weighing up to 132lbs like Samsung, Sony, Panasonic, Thomson, Toshiba, Sharp, LG, Philips, JVC etc. Solid and sturdy TV bracket with compatible faceplate that fits VESA patterns from 200x100mm to 600x400mm. Please check the VESA pattern, weight, size of your TV before purchasing.
• ✅ ADJUSTABLE OPTIMAL VIEWING - This premium TV wall mount tilts +10°/-10°, swivels +/-60° (max swivel angle depends on TV size) and level adjusts +/-3° for maximum viewing flexibility. Easily customize your TV watching experience to find the most comfortable and healthiest viewing position.
• ✅SAVE MORE SPACE - Built with dual articulating arms that retract 3 inch from the wall in home position to save space and also extends up to a maximum 15.4 inch from the wall. Saving you some valuable space and adding a nice, neat appearance to your household.
• ✅30 MIN FAST AND EASY INSTALLATION - Comes with all the required mounting hardware needed, a detailed English graphical installation guide that is actually useful (and even funny) which helps you to install this full motion TV wall mount without any hassle.
• ✅AFTER-SALES SERVICE - Our TV wall mount brackets includes an incredible 5 years friendly customer service. If you have any issues whatever, pls feel free to email or call us anytime rain or shine.

Product features

Pipishell - Make your life better!

The Pipishell Heavy-Duty Articulating TV wall mount has been designed with strength and versatility in mind. The ultra slim design allows the TV to be folded flat against the wall when pushed back and then from a central position can be extended outwards maintaining its centralised position, tilted and turned in any direction you require to accommodate normal TV shows, video gaming, fitness programs, video chats and more.

Will the TV wall mount fit my TV?

• First, please check your wall for wood studs, it can’t be used on concrete wall or drywall alone (Need to be installed with the anchor).
• Next, the weight of your TV should be less than 132lbs/60kg. Your TV should be at least 37 inch.
• Then, mounting holes distance on the back of TV must be less than 24" (600mm) horizontally and 16" (400mm) vertically.
• Finally, please check the TV back area inside the 4 mounting holes to make sure there are not any cables outlet. Otherwise, the plate may block the plugs.

Specifications:

• Fits 37" to 70" flat panel TVs, supports TV weight up to 132lbs / 60kg
• Can use with your existing TV. Also use together with SONY/SAMSUNG/VIZIO/LG/Hisense/TCL/SHARP/Toshiba/Panasonic/philips/SKYWORTH and more.
• Fits VESA mounting hole patterns: 200x100/200x200/300X200/300x300/400x200 400x300/400X400/500x300/600x200/600x400 (8"x4"/8"x8"/12"x8"/12"x12"/16"x8"/16"x12"/16"x16"/20"x12"/24"x8"/24"x16")
• Tilt adjusts 10 degrees forward or 10 degrees backward
• Swivel up to 60 degrees meets different viewing needs, rotate 3 degrees for perfect TV level adjustment
• Extends up to 15.4" and folds 3" from the wall to save space, wall mounting studs distance up to 16"

Package includes:

1x TV wall mount / 1x Standard mounting hardware /1x 3-Axis magnetic bubble level / 5x Cable ties / 1x User manual

• Universal TV Bracket: TV mount fits for most 32"-65" TVs including 32”, 39”, 40”, 42”, 43”, 49”, 50”, 55”, 60", 65", etc. Compatible with SAMSUNG, SONY, LG, VIZIO, TCL, ELEMENT, SCEPTRE, HISENSE, etc. With VESA pattern 75x75, 100x100, 150x150, 200x200, 200x300, 200x400,300x300, 300x400, 400x300, 400x400. Fits wood studs 8"/12"/16", brick and concrete walls(anchors included).
• Unique Height Setting: Wall mount TV bracket with 2 levels height setting design allows you to lower or lift your TV 4" at ease. Always provide you with better viewing experience no matter what kind of TV size you own.
• Upgraded Viewing Experience: TV mounting bracket tilts TV up 3° and down 15° to reduce glare; Swivels TV left or right according to your seat position; ±3°adjustment allows perfect TV leveling; Pull out up to 14" and retract back down to 2.65" for maximum flexibility.
• Effortless Installation: Full motion TV wall mount comes with clear instruction manual and mounting hardware in individual sealing bags to help you properly install the mount. 3-step installation process makes mounting a breeze.
• What You Get: Standard mounting hardware, 6 ft HDMI cable, 3-Axis magnetic bubble level, 3 pieces pack of cable ties, 10 years warranty and friendly customer service. Any question or suggestion for our TV wall mount, please contact us! We can solve it in 24 hours!

Product features

Swivel for Better Position

Swivel up to ±60° to meet your different viewing needs. Rotate your TV to a optimal position according to seat position rather than sit directly in front of the TV.

Tilt for Reducing Glare

Tilts TV 3° up and 15° down to eliminate annoying glare and reduce neck or eye strain for better viewing experience.

Low Profile for Saving Space

Articulating design makes the TV wall mount extend up to 14" and retract down to 2.65" from wall. Customizes your viewing experience and also makes a slim appearance.

Level After Installation

Found your TV is not level? Turn the 4 leveling bolts then correct it with included bubble level. No need to remove your TV from wall. Angle can be adjusted from +4° to -4°.

Product description

Don't leave your flat panel TV on a table or stand where it can be knocked over and damaged, or even worse injure a child or pet. Instead, mount it securely and safely to the wall using this Full Motion TV Wall Mount Bracket from Monoprice! This mount bracket supports adjustments in four dimensions; it can be swiveled 45 Degree, can be tilted to -15 Degree/+5 Degree, and can be rotated 3 Degree for fine level adjustments. Additionally, it can be extended from a minimum distance to the wall of 2.8" to a maximum of 24.6". The bracket has undergone extensive safety testing and has been certified by Underwriters Laboratories (UL), which ensures that it will perform safely and reliably. This bracket is designed to mount an LCD, LED, or Plasma display with a VESA mounting pattern between 200x200 and 600x900, which includes most 60" to 100" TVs. It can be mounted to any type wall (brick, concrete, wood stud, etc.) and can safely hold up to 176 lbs (including the weight of the mount itself). Mounting hardware is included.

• Designed for 60-inch to 100-inch TV's
• Can safely hold up to 176 lbs
• VESA Standard 200x200 through 600x900
• Capable of mounting to any type of wall
• UL Certification

User questions & answers

Question:	I have a sharp 60' led. is that vesa
Answer:	Kerosene is slightly more refined than diesel fuel (#2 heating oil is dyed diesel) the difference is #2oil has more paraffin wax than kerosene making kerosene less likely to gel. So yes.
Question:	Does it work on a lg oled 77 inch c9 or cx
Answer:	I can't be sure, but if you pour it down the fill tube it should mix itself as it enters the oil, not as well if you poured it in before having the tank filled. It is an additive so I would think it will mix well enough. If you plan to add oil soon to your tank then I would say to pour it in just before the fill. Read the bottle it states that it will treat 275 gallons, if your tank is low then I suggest you have your tank filled before using. I might also suggest, if your not sure of the maintenance on the system, for you to change or have the filter changed on the oil line, that should tell you the condition of the oil in the tank. It's the first line of defense for your heating system by removing contaminants and bad particles.
Question:	Does this allow for adjustment left or right if stud placement does not allow for centering on the wall
Answer:	What stuff from Home Depot are you referring? Oatley Fuel Oil Sludge Treatment? It has high ratings on Home Depot and on Amazon, but granted there are not a lot of reviews here. http://www.homedepot.com/p/32-oz-Fuel-Oil-Sludge-Treatment-35310/100145488?cm_mmc=Shopping%7cTHD%7cG%7c0%7cG-BASE-PLA-D26P-AirCirculation%7c&gclid=CIrYmtONkNACFUlZhgod8rUKyQ&gclsrc=aw.ds
Question:	Does this mount (60"-100") also tilt up and down
Answer:	I use large pasta cooking pot (with inner slatted pot) and fill it about three quarter with water. Heat the water to boiling and turn it off. Put the cap upside down in the hot water avoiding filling inside of the cap with water. Let the cap float for about five minutes. Drain it well before putting it on. Stays hot/warm for about 15 to 20 minutes.

Product features

Full Motion Wall Mount Bracket for 60" - 100" TVs, Max 176 lbs

Monoprice wall mounts are constructed of high-quality cold-formed steel for the ultimate in safety and reliability. Each wall mount has been strength-tested to ensure it is safe for both your equipment and your family.

Full motion mounts offer the ultimate in comfort and flexibility. You can adjust your television for the most comfortable viewing angle no matter where you choose to sit.

Capable of mounting any television with a VESA mounting pattern between 200x200 and 900x600 to any type of wall, this mount is ideal for displays ranging from 60" to 100", weighing up to 176 lbs.

Safety You Can Trust

On average, Monoprice sells a new wall mount every minute of every day! Each wall mount has been strength-tested to ensure it is safe for both your equipment and your family.

What's Included

With a Monoprice wall mount, you don't need to make a trip to the hardware store because each mount includes all the hardware needed to secure it to your wall.

Compatibility

Monoprice wall mounts are fully VESA compliant, making them compatible with any modern flat-screen television. You can trust that your television will be properly supported when you use a Monoprice wall mount.

Warranty

Monoprice not only stands behind every wall mount they sell with a 1 year replacement warranty, they also offer a 30-day money back guarantee. If the product you purchase does not satisfy your needs, send it back for a full refund.

Product description

- Easy to use with a quick release for easy removal (necessary because it is so close to the wall)

- Low Profile

- Adjustable width using their extension

- Easy to tilt to avoid glare

- Install-able by one

- A wide assortment of fasteners! There is little more frustrating than making a “quick” trip to the hardware store for a missing widget because you have a unique installation.



Fits 32"-86" TVs Up To VESA 600mm and 165lbs

High-grade Cold-rolled Steel Construction provides safety loading. This wall mount tv bracket universally fits most of 32"-86" TVs up to 165 lbs with max mounting holes 600mm x 400mm.



Distance and Tilt

It holds your TV 2.8" from the wall yet still offers some tilt (+5°-15°）to improve viewing and reduce glare. Unique tool-free knob for tilting to the perfect angle. Easy cable access with sufficient adjustment space



Can Be Mounted to Either 16" or 24" Wooden Studs

It fits 16" or 24" studs plus concrete wall typical in US homes . It can be mounted into all types of masonry. Only not for dry wall



Accessories

Installation Hardware Included: 1 manual instruction

1 spirit level

6 foot HDMI cable

• Everstone Universal Design - Fits most of 32"-86" TVs up to VESA 600 x 400mm and 165 lbs. Check these wall mount tv bracket informtion before you buy.
• Tool-free Tilting - Use the tilting knob to tilt TV up 5°and down 15° without any tools. Flush 2.8" low profile away from the wall;
• Types of wall - This tv wall mount fits 16" and 24" wooden studs plus masonry, not for dry wall alone.
• Easy Setup and Include All Necessary Mounting Hardware - Easy installation with decent instruction, all installation and mounting hardware included. Pulling straps locks and releases TV breezily. Comes with spirit level and HDMI cable as gifts.
• This tilt TV mount fits 32-86 inch TVs, great for Samsung, TCL, LG, Sony, VIZIO, Panasonic, Toshiba, Sharp, Insignia and so on. Compatible with multiple VESA pattern 100x100mm (4"x4")-600x400mm (24"x16")

• ✅Perfect centered design:This TV mount fits for most of 32-60 inch flat curved TVs, such as Samsung, Sony, Philips, etc with holds up to 77 lbs and Support VESA size 50x50cm (2"x2") to 400x400cm (16"x16"). Images on left side will help you check VESA, TV weight, wood studs spacing and possible blocked input.
• ✅Heavy duty material:Single Articulating Arm TV mount made of heavy-duty steel and alumunum.Technology of robot welding technology,and is equipped with upgraded reinforcement screws to eliminate the risk of bending the arms or loosening the screws when extending.You will get a safe and worry-free viewing experience.
• ✅Multifunction:Full motion wall mount tv bracket can be freely adjusted to desired angle and distance to provide comfortable viewing: Tilt the TV 3° up and 15° down to reduce glare. You can rotate the TV to the left or right according to the seat, ± 90 °. ± 3° post-installation adjustment allows the TV to level perfectly. It can be pulled out to 17 inches and then retracted to 3.07 inches, saving space in the room.
• ✅Easy installation:The packaging of TV mount contains the accessories needed for installation, You can easily to installation by yourself, according to the instructions (or watch the video on the left) . You will get 3 cable ties and One 6 ft. HDMI cable for cable management ,Also included is a large installation spirit level.
• ☎️Worry-free purchase: After purchase, you will have 7x24 hours customer service, leading 10 years of technical support! Or enter our shop to browse more products. Believe us, there will definitely be something to satisfy you!

User questions & answers

Question:	Whether Samsung TV is suitable
Answer:	Dear customer, thank you for your inquiry Yes, the TV mount fits all flat and curved TVs. For specific parameter information, please refer to the product details page. Happy shopping
Question:	What is the largest TV that can be rotated 90 degrees
Answer:	Dear customer, hello, thank you for your inquiry This depends on your installation location. There is a difference between a corner and a flat wall. The larger the TV, the more it will be blocked by the wall. Happy shopping
Question:	The maximum angle that this full motion TV mount can rotate
Answer:	Dear customer, thank you for your inquiry The maximum rotation angle is 90°. The size of your TV will affect the rotation angle. Happy shopping
Question:	What is the arm length of this full-motion TV mount
Answer:	Dear customer, thank you for your inquiry The arms are 8 inches long and the arms are 5.63 inches long. Happy shopping

• 【UNIVERSAL TV DESIGN】This full motion TV mount fits for most of 26-60 inch TVs including 32”, 39”, 40”, 42”, 43”, 49”, 50”, 55”, 60", etc with VESA size 100X100 mm to 400X400mm available and perfect center design.Fit single stud, brick and concrete walls, not to dry wall alone application.
• 【UPGRADED VIEW COMFORTABLE】This TV bracket with dual articulating arms includes +3° /-15° tilt, ±90°swivel, +/-3° post-installation adjustment allows the perfect TV leveling. All these will make your TV flexibility and better view based on your seat in the room.
• 【SAVING SPACE】This full motion tv wall bracket can pull out to 16” and retract back to 2.6”, which save some valuable space for you and make your house look neat.It is also a perfect choice to mount your TVs in a corner!
• 【STURDY AND DURABLE】Constructed with heavy-duty aluminum and steel, this swivel TV mounts has been strength tested based on UL standards ensure to hold the TV securely and steady.
• 【EASY TO INSTALLATION】Easy installation with detailed instruction and all included hardware in pre-labeled bags which helps you install the TV wall mount quicker and easier. JUSTSTONE tv wall mount enjoys a 10-year product support if you have any questions.

User questions & answers

Question:	Can this be mounted outdoors? mine TV is Sony 43 inch.vesa 300x
Answer:	It’s on the side of the inside the garage closer you move the switch to a time or leave it off to not auto close
Question:	None of the screws fit my tv t2 is to skinny and t3 is to thick. do i just return the tv mount
Answer:	I assume you press the remote that comes with the Skylink device (the little black remote) while inside your car with your homelink button (on the ceiling of your vehicle) at the same time -- that's how most of those systems work.
Question:	hello, How far apart (width) are the holes that mount to the wall
Answer:	Yes mine came with one
Question:	Will this mount work with tcl 43” model 43s525? vesa pattern is 100mm x 100mm
Answer:	There are two clamps in a set.

Product features

HOW TO MAKE SURE THIS WALL MOUNT FIT YOUR TV?

CHECK WALL TYPES & STUDS SPACING

• TV WALL MOUNT is designed for single stud mounting.
• It also can be mounted on concrete or brick wall. Concrete anchors are not included, they will be sent if need.
• Note：Not for dry wall alone application.

HOW TO MAKE SURE THIS WALL MOUNT FIT YOUR TV?

STEP 2

CHECK YOUR VESA PATTERN

Make sure your TV's VESA bolt pattern falls between 100x100mm and 400x400mm.

Accommodates VESA patterns: 100X100,200X200,300X300,400X200,400X400mm.

HOW TO MAKE SURE THIS WALL MOUNT FIT YOUR TV?

STEP 3

CHECK THE TV SPECS

• Make sure your TV weight less than 66 lbs
• TV size is between 26 to 60 inch

HOW TO MAKE SURE THIS WALL MOUNT FIT YOUR TV?

STEP 4

CHECK THE CABLE OUTLET

Please check possible blocked cable or inputs

FULL MOTION TV WALL MOUNT FOR 26" - 55" TVS

TV wall mount fits most 26 to 60 inches flat or curved screens with max weight of 88 lbs.

In the Box

• 1x TV mount
• 1 x Bubble level
• 2 x Velcro cable ties
• 1x User manual
• 1x Mounting template
• Standard mounting hardware.