5 best monoprice home theater system

Product description

Get everything you need for a great sounding home theater speaker setup in a single box! You get four satellite speakers and a center channel speaker for the mid- and high-range audio signals, plus an 8-Inch powered subwoofer to handle the low frequencies. All the speakers come with an attractive black finish and convenient spring-loaded signal connectors. The center speakers use two 3-Inch shielded mid-range cones, while the satellites employ one 3-Inch cone and a 1/2-Inch dome tweeter. However, don't let the small size fool you! These 8 ohm speakers will handle up to 125 watts of power from your home theater receiver at frequencies from 150 Hz to 20 kHz. The subwoofer is powered by a 60 watt (RMS) amplifier, driving a downward firing 8-Inch cone. It can take either line or speaker-level inputs, so can be used with any amplifier, even older amps without dedicated subwoofer outputs. The subwoofer handles frequencies between 50 Hz to 250 Hz and includes adjustable crossover frequency and volume balance controls. Also included in the box are four C brackets for mounting the satellite speakers to the wall and the necessary hardware for mounting the speakers to the brackets. A pair of plastic feet to properly orient the face of the center speaker is also included. Note that you will need to provide your own hardware for mounting the C brackets to the wall or other vertical surface. Don't let the low price fool you! This speaker system sounds great and will fill your room with high-quality, full-spectrum sound! Note: The speaker wire connectors on each unit comfortably accept a maximum 16 gauge speaker wire. For best results use pin-type speaker plugs to make the speaker connections and banana or pin-type plugs to connect the wires to your amplifier.

• Surround yourself in high-fidelity with the Monoprice 5.1-channel Home Theater Speaker System!
• This speaker system features four satellite speakers and a center channel speaker for the mid- and high-range audio signals, plus an 8" powered subwoofer to handle the low frequencies. All the speakers come with an attractive black finish and convenient spring-loaded signal connectors.
• The center speakers use two 3" shielded mid-range cones, while the satellites employ one 3" cone and a 1/2" dome tweeter. However, don't let the small size fool you! These 8 ohm speakers will handle up to 125 watts of power from your home theater receiver at frequencies from 150 Hz to 20 kHz.
• The subwoofer is powered by a 60 watt (RMS) amplifier, driving a downward firing 8" cone. It can take either line or speaker-level inputs, so can be used with any amplifier, even older amps without dedicated subwoofer outputs. The subwoofer handles frequencies between 50 Hz to 250 Hz and includes adjustable crossover frequency and volume balance controls.
• Also included in the box are four C brackets for mounting the satellite speakers to the wall and the necessary hardware for mounting the speakers to the brackets. A pair of plastic feet to properly orient the face of the center speaker is also included. Note that you will need to provide your own hardware for mounting the C brackets to the wall or other vertical surface.

User questions & answers

Question:	What speaker stands work with the Monoprice
Answer:	Any stand will work. I purchased wall mounts for my surround speakers.
Question:	Could I use this with a receiver and what would I need to do to get it to work correctly
Answer:	It will work with any 80-100w/ channel receiver. Connect using banana plugs and 14 gauge speaker wire. Make sure to get the woofer spreaker cable with a Y splitter. Monoprice website sells all the cables you need at a great price. Better than amazon
Question:	Could anyone recommend a set of towers to make this a 7.1 system
Answer:	I would definitely agree. Monoprice sells a set of two of the speakers separately for use on their own as a 2 channel system or as an add on to this 5.1 system to make it 7.1. They even sell the subwoofer separately as well if you ever want to upgrade to a true 7.2 system. Then everything will be perfectly matched. Make sure to get the correct set of two Premium Monoprice speakers. Monoprice also sells a lower quality standard 5.1 surround sound system and a set of two extras of that type as well. If you have the correct set, they will exactly match the speakers in the Monoprice Premium 5.1 surround sound speaker set. I know this because I actually had what I thought was the correct one in my shopping cart only to find out it was the wrong set just before pulling the trigger. So it's an easy mistake to make even when you've done a bunch of research. I hope you enjoy your system. They are absolutely amazing speakers. My family is constantly amazed at how much information and nuance is embedded in soundtracks of our favorite movies and shows that we never heard with our previous home theater system. It's like a completely different experience now. Good luck.
Question:	What are the dimensions of the individual speakers? I'm espescially curious on the size of the center channel
Answer:	The center channel is 4x9.5x4 Height, width, Depth respectively. The Subwoofer:12x10x12, The Satellites are :6x4x4

Product features

Monoprice 5.1 Channel Home Theater Satellite Speakers And Subwoofer - Black

This headphone amplifier features a USB input and a professional level Texas Instruments Digital to Analog Converter (DAC), effectively replacing your sound card without requiring you to open your PC and installing a new card. The high-current output allows it to drive headphones with a wide range of impedances, from 16 ohms to 600 ohms.

The RCA line outputs allow you to send the output to a stereo amplifier or powered speakers for those times when you don't want to use headphones. A set of RCA line inputs allows you to connect an external audio source, such as a CD player, so you can enjoy the advantages of the high-current headphone output with other audio sources.

Product description

The Monoprice premium 5.1.2-Channel immersive home theater system takes your home theater to new heights! Fully compatible with both standard and Dolby Atmos enabled receivers, The 5.1.2 system features two satellite speakers that have been equipped with immersive, upward-firing drivers, enhancing the detail in multichannel, multidimensional soundtracks. Based on the sound signature and components of the popular 10565 Home theater system, The Monoprice premium 5.1.2-Channel immersive home theater system surpasses all expectations for sound quality in a small package!.

• Immersive sound: The immersive, upward-firing Driver adds a new dimension to movie soundtracks, making the sound come alive from all directions and creating a 3D space. The upward-firing Driver Projects sound towards the ceiling, with the ceiling reflecting the sound back down into the listening space. With this system there is no need to install in-ceiling speakers for height channels! This driver arrangement and connectivity is fully compatible with Dolby atmos@enabled receivers and soundtracks
• Powerful subwoofer The powered subwoofer Features an 8" Downward-firing speaker Driven by a beefy 200 watt amplifier. It features a variable crossover from 40—150 Hz and a phase control switch on the back, allowing you Dial in the phase of the subwoofer in relation to the rest of the system The subwoofer is a compact 126" Cabinet, weighs about 20 pounds, and includes both line and speaker level stereo inputs, making it compatible with any amplifier or receiver
• Compact size: the standard satellites measure 430 x 69" X 43 and weigh 2.9 pounds each, making them easy to mount almost anywhere. The satellites with the upward-firing immersive Driver measure 45" X 10.5" X 53 and weigh 29 pounds each. The center channel speaker measures 10.2" X 43 x 43" And weighs 3.0 lbs. Each speaker is equipped with a Universal 1/4"X20 threaded insert Mount
• Buy with confidence: Monoprice not only stands behind every product we sell with a 1 year Replacement warranty, We offer a 30-day money back guarantee as well!
• Quality at a fair price: Monoprice's rugged design and rigid quality control standards deliver high quality products at fair prices

User questions & answers

Question:	Whats the max watts for individule speaker other than the sub
Answer:	I don’t know why you would do that, if you could just pair the earbuds to the content device.
Question:	satilite speakers has 4 speaker ports 2 for atmos, do you connect 2 channels for both the ports to get atmos effect
Answer:	It has an option for head phone jack hook up. 1/8 plug on both end of cord is needed, in my case.
Question:	Is the connection on the back of the subwoofer included with this system,the single rca or the y adapter split cable type
Answer:	yes
Question:	How many watts rms is this system
Answer:	Output is 5 watts x 2

Product features

Monoprice Premium 5.1.2-Ch. Immersive Home Theater System with Subwoofer

Fully compatible with both standard and Dolby Atmos enabled receivers, the 5.1.2 system features two satellite speakers that have been equipped with immersive, upward-firing drivers, enhancing the detail in multichannel, multidimensional soundtracks. Based on the sound signature and components of the popular 10565 home theater system, the Monoprice Premium 5.1.2-Channel Immersive Home Theater System surpasses all expectations for sound quality in a small package!

Product description

The Monoprice Premium HT-35 5. 1 Home Theater System takes your home theater to a new level! The HT-35 has been engineered with appearance, aesthetics and sonic superiority in mind. Featuring four satellite speakers, a center channel speaker, and a 200 watt, 8in subwoofer, the HT-35 is easy to setup, will breathe new life into any home theater system, and handily outclass most soundbars.

• Modern design: Featuring compact, stylish curved cabinets and low profile speaker grilles, the HT-35 will seamlessly blend into any living space.
• Secure mounting option: The satellite and center speakers feature a universal 1/4inx20 threaded mounting hole on the rear panel, allowing you to mount them securely to a wall mount or floor stand, while the satellites have an additional mounting hole on the bottom.
• Compact size: The satellite speakers measure only 7. 5in x 4. 3in and weigh 2. 9 pounds each, while the center channel speaker measures about 10. 2in x 4. 3in x 6. 3in and weighs 3. 0 pounds. The compact 200-watt subwoofer is a 12. 2in cube and weighs less than 20 pounds.
• Four satellite speakers, a center channel speaker, and a 200 watt, 8in subwoofer.
• Easy to setup.

Product features

Monoprice HT-35 Premium 5.1-Channel Home Theater System with Powered Subwoofer

The Monoprice Premium HT-35 5.1 Home Theater System takes your home theater to a new level! The HT-35 has been engineered with appearance, aesthetics and sonic superiority in mind. Featuring four satellite speakers, a center channel speaker, and a 200 watt, 8" subwoofer, the HT-35 is easy to setup, will breathe new life into any home theater system, and handily outclass most soundbars.

Product description

This is an 8-Inch powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers. The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output. High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier. Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer will then combine the signals to process the mono bass signal it needs to drive the speaker. If you are using an amplifier with a single mono subwoofer line level output, simply use an RCA -Inch-Inch cable to split the output and send it to the two line level inputs on the subwoofer. The subwoofer is housed in an attractive black wood cabinet that measures 13.75-Inch x 11.75-Inch x 11.75-Inch (H x W x D). The driver and a 2 3/4-Inch sound port are located on the front, covered by a black cloth speaker grill. Amplifier Power Output: 60 Watts (RMS).

• This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers.
• The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output.
• High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier.
• Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer will then combine the signals to process the mono bass signal it needs to drive the speaker. If you are using an amplifier with a single mono subwoofer line level output, simply use an RCA "Y" cable to split the output and send it to the two line level inputs on the subwoofer.
• The subwoofer is housed in an attractive black wood cabinet that measures 13.75" x 11.75" x 11.75" (H x W x D). The driver and a 2 3/4" sound port are located on the front, covered by a black cloth speaker grill.

User questions & answers

Question:	What is the return policy
Answer:	You can go through Monoprice- their customer service is incredible
Question:	What are the dimensions of the cabinet? description says 13.75-inch x 11.75-inch x 11.75-inch (h x w x d). info says 14.8 x 16.1 x
Answer:	11 7/8" wide 13" tall with feet attached 11 3/4" deep BUT add 1/2" for the connections that stick out the pack, perhaps a bit more to allow for the cables to plug in.
Question:	How tall is it without the feet, are the feet removable
Answer:	feet are removable and height without feet is 11 and 13/16ths
Question:	I only have 1 3.5mm out to subwoofer. if a use a 3.5mm to rca cable will it work ok
Answer:	Use a 3,5mm to 'Y' RCA cable (adapter). JSAUX makes a good one, I use it from my ZVOX to subwoofer. JSAUX RCA Cable, [6.6ft/2M, Dual Shielded Gold-Plated] 3.5mm Male to 2RCA Male Stereo Audio Adapter If you need more length just get a male-to-female 3.5mm extender/headphone cable.

Product features

About Us

We exist to bring simplicity, fairness, & confidence to technology choices.

Established in 2002, we have built a stellar reputation for product excellence. We offer over 7,000 high-quality, electronics and accessories to professionals and consumers worldwide. Our proven business model eliminates entire layers of markup within the supply chain, which allows us to sell premium products.

Product description

The Monoprice premium 5.1.4-Channel immersive home theater system takes your home theater to new heights! Fully compatible with both standard and Dolby Atmos enabled receivers, The 5.1.4 system features four satellite speakers that have been equipped with immersive, upward-firing drivers, enhancing the detail in multichannel, multidimensional soundtracks. Based on the sound signature and components of the popular 10565 Home theater system, The Monoprice premium 5.1.4-Channel immersive home theater system surpasses all expectations for sound quality in a small package!.

• Immersive sound The immersive, upward-firing Driver adds a new dimension to movie soundtracks, making the sound come alive from all directions and creating a 3D space. The upward-firing Driver Projects sound towards the ceiling, with the ceiling reflecting the sound back down into the listening space. With this system there is no need to install in-ceiling speakers for height channels! This driver arrangement and connectivity is fully compatible with Dolby atmos@enabled receivers and soundtracks
• Powerful subwoofer The powered subwoofer Features an 8" Downward-firing speaker Driven by a beefy 200 watt amplifier. It features a variable crossover from 40—150 Hz and a phase control switch on the back, allowing you Dial in the phase of the subwoofer in relation to the rest of the system The subwoofer is a compact 126" Cabinet, weighs about 20 pounds, and includes both line and speaker level stereo inputs, making it compatible with any amplifier or receiver
• Compact size the immersive, upward-firing satellites measure 4.5" X iOS x 53 and weigh 29 pounds eactb while the center channel speaker measures about 102" X 43" X 4.3" And weighs 3 pounds both the satellite and center speakers are equipped with Universal 1/4'x20 threaded insert mounts
• Buy with confidence: Monoprice not only stands behind every product we sell with a 1 year Replacement warranty, We offer a 30-day money back guarantee as well!
• Quality at a fair price: Monoprice's rugged design and rigid quality control standards deliver high quality products at fair prices

User questions & answers

Question:	Are the rear speakers wireless or do they need to be wired to your A/V receiver
Answer:	yes, my kids listen to the radio all the time on this stereo. We're based in the US and they're listening to US stations
Question:	Can you recommend an ideal AVR to go with this (under
Answer:	Yes it has the connections in the back of the unit
Question:	Dolby atmos requires separate wires with own channel how does this work here
Answer:	It takes up to 4 hours to charge the battery
Question:	I know these speakers are for home theater but how does it sound for music? How's the clarity when it comes to highs and lows
Answer:	Yes, it will. While the device supports up to 32 GB cards, we don't recommend using a card larger than 8 GB, as may cause some delay between motion detection and audio playback
Question:	How is the video quality through hdmi arc
Answer:	Removable rechargeable battery comes with the unit. Just plug it into the charger and off you go. Charge lasts very long time. The unit can be really loud as long as the sounds on the included 128 Mb micro sd card are recorded at maximum loudness.
Question:	What are the differences between this "F6B" model and just "F
Answer:	The unit senses motion that are in it's direct line of sight. If there's obstacles in the way, it won't detect motion
Question:	Will this work in Europe with 220v
Answer:	I looks as though it is a batch number because all of our systems have an X.
Question:	Does this have 4K pass through
Answer:	Our VoiceBoosters do not have "Phantom Power" and will not work with well with a Condenser Mic.

Product features

Top reasons to choose VIZIO’s best sound system.

1. Experience an immersive new dimension of surround sound with Dolby Atmos.
2. Cinema-inspired sound from every angle. Even from above.
3. Experience movies, original series and more in a whole new way in Dolby Atmos
4. 5-channel sound bar with two dedicated upward firing speakers.
5. Experience true cinematic surround sound with dedicated rear surround speakers.
6. Wireless subwoofer delivering room-shaking bass.
7. Works with Google Assistant.
8. Multi-room streaming capable.
9. Stream wirelessly via Chromecast or Bluetooth.

Upward-firing speakers deliver multi-dimensional sound that moves above and around you.

101 DBSPL

Wireless subwoofer designed for a new level of deep.

DOWN TO 40 HZ*

Multi‑dimensional surround sound from upward and front firing speakers.

5.1.2 SURROUND SYSTEM

Stream your favorite artists and apps with Bluetooth and Chromecast built-in.

Use your voice to control your sound bar.

Monoprice Premium 5.1.4-Ch. Immersive Home Theater System with Subwoofer

Fully compatible with both standard and Dolby Atmos enabled receivers, the 5.1.4 system features four satellite speakers that have been equipped with immersive, upward-firing drivers, enhancing the detail in multichannel, multidimensional soundtracks. Based on the sound signature and components of the popular 10565 home theater system, the Monoprice Premium 5.1.4-Channel Immersive Home Theater System surpasses all expectations for sound quality in a small package!