13 best cctv testers

• Support up to 8MP TVI/CVI/AHD, CVBS, 4K H.265 IP, support Dahua, Hikvision, Axis etc ONVIF camera test
• H.265/H.264, 4K video display via mainstream
• DC12V 3A, DC48V PoE power output. Rapid ONVIF, auto view video and create testing report
• 10/100/1000M Ethernet, network state and traffic display. Innovative coaxial HD focus, video signal quality test
• Wrist design, portable and easier to carry. We provide free lifetime tech-support, if any question, just email us

User questions & answers

Question:	how much does the Lithium Polymer Battery cost for a replacement
Answer:	I haven't had that happen yet, but I will think it would be quite cheap if you can do it yourself.
Question:	can you get a replacement power cable
Answer:	It's nothing special, just a 12v dc input. Have you contacted the manufacturer?
Question:	Can this accept GigE video
Answer:	Yes, this camera tester can accept GigE video.
Question:	i have one of those i broke the screen, anyone knows where i can find replacement
Answer:	Contact the manufacturer. I'm sure they're not too expensive.

• 【Analog Camera Tester】5.0 inches 800 x480 High-resolution view angle display, more intuitive and easy to display the camera image quality, support PAL/NTSC standard video signal. Support CVBS + AHD (5MP) + TVI (5MP) + CVI (4MP) Camera Test，4-In-1 CCTV Tester Monitor. High-resolution 5.0 inches 800 (RGB) x480 wide viewing angle display, Viewing angle larger, more intuitive and easy to display the camera image quality. Support PAL/NTSC standard video signal.【NOT Support IP Camera】
• 【Hdmi Video Test Monitor】Developed for the on-site installation and maintenance of Analog Camera (CVBS) and HD Coaxial Camera, having TVI,CVI, AHD. It also provides many useful functions, such as video display, PTZ control, DC12V output power, audio test, image generator, VGA video signal input, HDMI1.0 signal input, RS485 data searching, cable testing, LED lamp etc.
• 【PTZ Controller】 Video monitor tester built-in Pelco-D / P PTZ control protocol,etc. , through its own RS485 interface, the user can control the PTZ up, down, left, right rotation, and adjust one machine zoom, focus,aperture size.
• 【CCTV Tester】DC12V 1A output power: Power the camera with DC12V (1A) power output from the tester. It is helpful for demo and testing when the power supply is not available. Rechargeable: Built-in 18650 2600mA battery X 2,after charging 3-4 hour, working time lasts 11 hours.
• 【Warranty and Professional Technical Support】 30-day money-back guarantee and 1-year warranty which includes free parts replacement and lifetime technical support. Anpviz Teams Provide free lifetime tech support, E-mail, telephone or video support all could be provided.

User questions & answers

Question:	Can i link this to my security system and use my mouse to control and down load video to my usb device
Answer:	No. This is for viewing your hardwired camera feed while you are on a ladder and trying to figure out what the cameras going to view. Power plugs into camera and video out. Turn on this unit and adjust camera to your requirements. I had to buy this in addition to my older 8 year old unit as Resolution Has increased and you have to have updated equipment to view your cameras.
Question:	Does this tester support coaxialtron PTZ
Answer:	If you mean diagonal I don’t know. My PTZ only supports y & z and the arrows on this unit move the camera left right up down.
Question:	Does it support basic composite video input
Answer:	It will handle of the video inputs from any surveillance video camera.
Question:	Can i test poe cameras with this
Answer:	Sorry, This cctv tester only support test analog camera

Product features

Troubleshoots

• IP camera can not be tested.

This tester not supports any IP cameras testing, it can only be used to test analog cameras.

• The tester can not produce pictures.

When the device is switched to CVI mode, only connected to CVI camera can it produce pictures. If the camera is other TVI / AHD signal camera, the mode should be switched to TVI / AHD signal correspondingly, so that the connected camera can produce pictures but not flicker.

• Must this be plugged in, in order to turn on or does the batteries need to be charged?

This tester is built-in battery, as long as the battery power is sufficient, you can turn it on normally, if not, that means that the battery power has been consumed, you need charge it, fully charge it and then you can unplug the power supply to use.

• HDMI isn’t recognized.

If HDMI is used as the display input, it can only be connected to the NVR or DVR which with an input signal of HDMI. If HDMI is a signal output, it needs to be connected to the display or TV.

4 in 1 CCTV Tester(Not Support IP Cameras)

Tips

●To avoid the battery can’t charge next time. Don’t recharge it until the battery was completely used

●This tester NOT supports IP Camera

TVI camera test: HD TVI video surveillance testing, support 1MP, 2MP, 3MP, 4MP, 5MP. When TVI signal input, the tester will display HD TVI camera image.

AHD camera test: HD video surveillance testing, support 1MP, 2MP, 3MP, 4MP, 5MP. When AHD signal input, the tester will display the AHD camera image.

CVI camera test: HD video surveillance testing, support 1MP, 2MP, 3MP, 4MP. When CVI signal input, the tester will display the CVI camera image.

CVBS: PAL/NTSC, 960H Camera, 800tvl/1000tvl/1 200tvl analog camera

PTZ Controller

Support RS485, compatible with protocols

PELCO-D/P, you can control the ratation of PTZ, up or down, left or right, and you also can adjust zoom, focus, aperture size.

Rechargeable

Power the camera with DC 12V (1A) power output from the tester. It is helpful for demo and testing when the power supply is not available. Built-in 18650 2600mA battery, after charging 3-4 hours, working time lasts 11 hours.

Video Signal Testing

Video monitor tester, high-resolution 5.0 inches 800 (RGB) x480 wide viewing angle display, Viewing angle larger, more intuitive and easy to display the camera image quality. Support PAL/NTSC standard video signal.

5 Inch CCTV Tester

Audio testing: Test the audio input from pickup devices. Connect the tester and pickup device with the audio cable.

UTP cable test: Display UTP cable connection status, cable type and the sequence of wires as well as read the number of the test box.

VGA/HDMI input: Support VGA/HDMI 1.1 Compliant Digital input, once connect VGA/HDMI video, please switch selector to select HDMI or VGA mode.

Packing list

Product description

IPCX-ACTHA

1.Support HD camera Testing:TVI 8MP(3840*2156 15P), CVI 8MP(3840*2156 15P), AHD 8MP(3840*2156 15P).

2.Support IP camera max up to 6K and Analog camera.

3.Support PoE 48V, DC5V 2A, DC12V 3A,DC24 1A output.

4.Support Onvif standard protocol, compatible to most cameras in the market.

5.Screen resolution: HD IPS 1920 × 1200, instant image transmission.

6.IP discovery tool, it is used to scan the whole network segment IP, and auto-modify tester’s IP address.

7.Open source, can install Android software.

8.4K H265, H264, MPEG4 network camera main stream test.

9.HDMI input and output, 1080P.

10. With Built-in manual book and Browser.

11.Support wireless WIFI(10M/100M/1000M) and hotpots, easily connect and test wireless WIFI camera.

12.RS485 Port: Receive, send and analyze data, used for PTZ protocol analysis, etc.

13.Network tools: to scan all the IP address in the network, and test current network condition and PING value.

14.It can update software on line on store.

15. Network cable TDR test function can display cable length, attenuation, quality, reflectivity, impedance parameters.

16. Rechargeable 7000mA / 7.4V polymer lithium battery. Working hour:6~10 hours.





If you have any operation issue, please don’t hesitate to contact with us.

• 7 inch 1920*1200 HD resolution IPS touch screen, with rechargeable 7000mA / 7.4V lithium battery
• It outputs DC 5V/12V/24V and PoE 48V for camera power supply
• Network cable TDR test function can display cable length, attenuation, quality, reflectivity, impedance parameters
• With HDMI input and output, 1080P.
• Support max 6K IP camera and TVI/CVI/AHD 8MP camera testing

User questions & answers

Question:	How does it work with coax camera
Answer:	We use the Synology NAS units with their free Surveillance app. All browser managed. Has phone app as well. A NAS unit and huge drive can be put together for well under $500 and beats any DVR out there for bang for the buck. Also the Synology enclosures come with 2 included IP camera connectivity licenses. You can buy more (up to like 10-16 cams per NAS unit) as separate licenses for like $50 each. But if you just need 1-2 cams to record then those licenses are included.
Question:	is this compatible with CVBS analog cameras
Answer:	Right, the M2025-LE can be connected via cable only to a PoE switch. It doesn’t have inbuilt Wi-Fi Capability
Question:	does it test 5mp cvi, tvi camera
Answer:	No -
Question:	which andriod version is this
Answer:	No, it doesn't. However, some of the software compatible with this camera for video streaming and recording can be downloaded from the manufacturer's website. Moreover, this model has digital PTZ (Pan/Tilt/Zoom) which enables you to remotely control the actual orientation and optical zoom of the camera.

• H.265/H.264, 4K video display via mainstream. 1920*1200 resolution.(Note:The product box and manual are generic and include all functions.The actual function of this product is subject to the description.)
• RJ45 cable TDR test, cable quality test. Rapid ONVIF, auto view video, and create testing report.
• Dual window test, IP &Analog camera test. TesterPlay, tester, android version mobile phone and PC display at the same time.
• HDMI output, 1080p. Quick office(excel ,word ,PPT format ) doc. UTP cable tester.
• Customers self update software. Built in WIFI, create WIFI hotspot. IP discovery , shortcut button, drop-down menu. DC12V 2A, DC48V PoE power output.

User questions & answers

Question:	Can you view a live feed of cameras when connected to device
Answer:	Yes, this DVD palyer does work with 110-220v.
Question:	The Chrome version that is installed is version 49 while current version is 80. Can you update Chrome to current version
Answer:	I’m not sure how to put it in this comment it doesn’t give me an option but it looks exactly like a basic remote control mini size. It’s the same size as my Roku remote just way more buttons
Question:	Will this device work on tvi, cvi and sdi cameras
Answer:	No, sorry to tell you that this DVD player does not support bluetooth.
Question:	Does it come with a battery
Answer:	Yes, this DVD player support closed captions, but please make sure that your original disk support the caption on/off.

• 🔥 The new HD coaxial camera tester is developed for the on-site installation and maintenance of HD coaxial camera, having TVI, AHD and CVI. It also provides many useful functions, such as video display, PTZ Control over Coax, PTZ control(RS485), DC12V output power, audio test, LED lamp etc.
• 🔥 5 Inch VS 4.3 Inch : This new version of cctv camera tester is design with bigger screen and higher image resolution to provide you with brighter test experience. 5" HD high image resolution monitor enable to show clear image that fits any place to use.
• 🔥 Equips with Lithium battery of high capability. Each 4 hours recharge will last 4-5 work hours when applied to test work.(AHD+TVI +CVI+CVBS and CCD power supply without)
• 🔥 Best system equipment for installing and inspecting engineering. Build-in Li battery; video-in terminal and DC power supply. Palm size, easy to carry and operate.
• 🔥 With ADSL Detection Function.Strict quality control management & friendly customer supports.Any questions,feel free to reach us,we are always at your disposal.

User questions & answers

Question:	Work with 1080p Cvi and tvi Cameras
Answer:	Yes
Question:	Can it save the video on an SD Card
Answer:	I don’t think so. It only view’s the image from the camera so I don’t think it can record it.
Question:	Do i need to supply my own bnc cable to input analog ntsc video
Answer:	No the one I purchased had cables included
Question:	do you have a user manual that can be down loaded for this tool? the little piece of information included is very vague on how to preform all testing
Answer:	Yes,we can offer you user manual ,so please contact us via emails,we are glad to send it for you for solving problems.

Product features

5 Inch HD CCTV Tester

• 5" HD high image resolution monitor enable to show clear image that fits any place to use.Higher image resolution to provide you with brighter test experience.

Updated Veriosn VS Old Version

• 5 inch VS 4.3 inch ,bigger screen for more convenience.
• HD 800（RGB）x 480 resolution VS 480*272,clear image resolution for you to have greater using experience!

Portable to Carry Anywhere

• Palm size, easy to carry and operate.
• Best system equipment for installing and inspecting engineering. Build-in Li battery; video-in terminal and DC power supply.

Product Accessories

• HD coaxial camera tester
• Adapter DC5V 1A（with micro USB cable） International Standard 18650 2600 mAh battery
• BNC cable
• RS485 connector
• Power output conversion cable
• Audio cable
• Wrist band
• Instruction Manual

• Developed for the on-site installation and maintenance of Analog Camera (CVBS) and HD Coaxial Camera, support 8MP TVI,CVI, AHD and Analog Camera. (NOT SUPPORT IP CAMERA)
• High-resolution 5.0 inches 800 (RGB) x480 wide viewing angle display, Viewing angle larger, more intuitive and easy to display the camera image quality. Support PAL/NTSC standard video signal.
• Video monitor tester built-in Pelco-D / P PTZ control protocol,etc. , through its own RS485 interface, the user can control the PTZ up, down, left, right rotation, and adjust one machine zoom, focus,aperture size. Multi-format video OUT port image generator, sending a variety of standard (e.g. PAL, NTSC) color graphics section
• Power the camera with DC12V (1A) power output from the tester. It is helpful for demo and testing when the power supply is not available.
• Rechargeable: Built-in 2x 18650 2600mA battery, after charging 3-4 hour, working time lasts 12 hours

User questions & answers

Question:	Work this 5mp cctv tester work with 1080p cvi and tvi cameras
Answer:	Yes, it works with 1080p Cvi and tvi Cameras, even 5MP.
Question:	Does this test ip cameras
Answer:	No, it's 4 in 1 5mp ahd cctv camera test, you can test ahd tvi cvi and analog camera, but doesn't support IP.

Product features

Specifications:

Size:5 inch 8MP, 8.0 Mega Pixels CCTV Security System Camera Tester Monitor

Compatible camera:AHD TVI CVI CVBS CCTV Camera Tester

Image Resolution: 800*480

Video Input:1CH BNC INPUT/ 1CH BNC OUTPUT

Video Output: VGA&HDMI Video Format: NTSC/PAL. RS485: Support PTZ control.

OSD Language: English / Russian/ Deutsch/ Espanol/ Portugal/ Italian ,etc.

Rechargeable 3.7V 2600mAh Lithium battery:each 4 hours recharge lasts 7 working hours. Dimension:4.33x4.33x4.33inch Weight:2.65lb.

Multi-Function:

Video signal test:Video monitor tester,800(RGB)x480 wide viewing angle display, more intuitive and easy to display the camera image quality.PAL/NTSC standard video signal.

Analog/AHD/TVI/CVI camera test:720P / 960P / 1080P / 3MP / 4MP / 5MP/ 8MP AHD camera, TVI & CVI camera; traditional CVBS analog camera like 960H 1000tvl 1200tvl security camera.

Audio test:Test the audio input from pickup devices.

Network cable test:By UTP CABLE TEST port on the meter, you can test the connection of network cable.

VGA/HDMI Output:Support VGA/HDMI, please switch selector to HDMI or VGA mode. The maximum resolution is 1920x1440.

LED lamp:It's convenient for installers to install and maintain security system at night.

The battery graphic display:The tester has advanced power control and protection circuit, low-power energy-saving, 4 to 5 hours on a single charge, can be used normally for 12 hours.

5 inch 8MP CCTV Tester Monitor W/ VGA&HDMI

Package Include:

1xJZTEK 5 inch 8MP 4-IN-1 LCD Monitor CCTV Tester

2x2600mAh Lithium Battery

1x5V 1A Adapter

1xWrist Strap

1xMicro USB Cable

1xPower Output Cable

1xUser Manual

5 inch Blue CCTV Tester Monitor

5 INCH 8MP 4 IN 1 CCTV TESTER:

JZTEK hybrid camera tester is able to test and debug coaxial 720P / 960P / 1080P / 3MP / 4MP / 5MP/ 8MP AHD camera, TVI & CVI camera; traditional CVBS analog camera like 960H 1000tvl 1200tvl security camera.

Please search ASIN: B0817T225M

4-in-1 1080P AHD Camera

JZTEK 1080P 4-in-1 960H CVBS Analog/AHD/TVI/CVI Security Camera:

It comes with OSD Menu which can change 4 different video output 960H CVBS Analog/AHD/TVI/CVI by OSD Menu, just hold the button for about 5 seconds, till the monitor pops out the OSD menu.

Please search ASIN: B01LWNE51G

Product description

IPCX9310 Feature:

1.4 inch resolution 800 × 480 IPS HD full view,H.265/H.264, 4K video display via mainstream.

2.Network cable TDR test function can display cable length, attenuation, quality, reflectivity, impedance parameters.

3.Support IP&CVBS&Coax HD Camera test:HD TVI&CVI 8MP(3840 X 2156 15P); AHD 5MP(2560 X 1920 15P).

4.With RS485 port to support PTZ Control:Support Pelco-D/P, Samsung, Panasonic, etc. more than 30 protocols.

5.IP-Discovery:works as a router, can identify camera IP directly even you do not know the camera IP. With this function, you can discover camera IP and jump to ONVIF to view camera video directly.

6.Support PSE device power input and test,such as switch voltage test. And support DC12V 3A,PoE 48V output.

7.UTP Cable test: Test any 2 cable core connection sequence and on-off status.

8.RTSP player can play RTSP network video stream directly.

9.Built-in WIFI connection: 10M/100M/1000M automatically adaptive.

10.CVBS Analog Camera test:1 channel CVBS analog signal input, support PAL/NTSC format adaptation, and full screen display.

11.HIKVISION SADP tool:HIKVISION camera batch activation, batch IP modification, be able to modify username and password

12.Dahua test tool:Dahua camera batch activation, batch IP modification, cross network segment IP modification, modify username and password.

13.Rapid ONVIF function enables you to view IP camera video quickly, as long as the camera IP and the instrument IP are in the same network segment and the camera supports ONVIF protocol.

14.Support all camera videos photo taking, video recording and stored as H264 format.

15.It can update software on line on APP store.

16.Built-in Rechargeable 7.4V polymer lithium battery, capacity 3200mAh, can work continually for 6-8 hours.





If you meet with operation issues, please contact with us directly

• Support IP camera max 4K, Analog camera, Coax HD camera: TVI 8MP, CVI 8MP, AHD 8MP
• 4 inch screen resolution 800 × 480 IPS HD full view,H.265/H.264, 4K video display via mainstream.
• IP-Discovery:works as a router, can identify camera IP directly and view the video one by one
• Network cable TDR test function can display cable length, attenuation, quality, reflectivity, impedance parameters
• Power supply: output 12V 3A and PoE 48V

User questions & answers

Question:	this product confirm support hdcvi 5mp camera
Answer:	yes, it supports max 8MP,3840x2156 15P for hd CVI camera.
Question:	Buenas noches! La pantalla es táctil? Muchas gracias
Answer:	Si es 100% tactil. hasta ahora ha dado la talla el equipo.
Question:	So is this a network tester as well? How well does this work
Answer:	yes, it support IP camera as well as analog and HD camera. for IP cctv camera, it supports max up to 4K camera on basis of Onvif standard protocol, compatible to most cameras in the market. IP discovery tool, it is used to scan the whole network segment IP, and auto-modify tester’s IP address. Make your job much more efficient.
Question:	Is there a how to use video? (Link Please
Answer:	We have a very manual book to show you how to use it. and if some speical operation, you could email us for video.

Product description

Note:

This device is for viewing a standard analog camera. NOT FOR OTHER CAMERAS.



Specification:

Display: 4.3"TFT Color LCD

Number of Pixel: 480RGB(H)X272(V)

Video In: Video In × 1 (BNC connector)

Export: 7 kinds of color bar signal output DC power out × 1 (Support CCD camera of power source/ Max electric currency 500mA)

System Format: NTSC / PAL

Battery Specification: Built-in rechargeable Lithium battery : 3.7V 2600mA/h

Power Specification: External power :DC 5V 1.0A Adapter

Dimension/ Weight: 178mm (L) x110mm (W) x 40mm(H) / 350g



Question: Can this unit work on digital IP cameras as well as analog?

This device is for viewing a standard analog camera. You need a computer or tablet and a network to be able to view an IP Cam. This device will not show a picture from the newer cvi cameras either. A IP Cam outputs through a built in webserver which is why you need a computer and network.



Question: Why can’tturn on the device?

1.Check battery power capability.

2.Check if correctly using the original manufactured re-charger.

3.Check if the re-charger is normal function.



Question: Why can't the image function normally?

1.Check if the camera connects correctly with the terminal of the mainframe.

2.Check if the power is on or off.

3.Check power volume. Please recharge if the power is run out.

• Portable Product--Portable product is able to use in any place and any time. It is easy to hold and do not need complicated equipment that hinders the inspecting and repairing
• Support DC Power for Camera--It's convenient for user to check camera condition and correct direction of camera, so to make installation and repairing easier
• Monitor--4.3" high image resolution monitor enable to show clear image that fits any place to use
• Long Work Time--Equips with Lithium battery of high capability. Each 6hours recharge durables 5 ～8 working hours
• Humanized Design of Appearance--Hand-hold design for professionals. Easy operation without taking off gloves speeds your works. Clasp ring at bottom fits to all chains and use in all environment

User questions & answers

Question:	Can i test the ahd camera on this particular unit? like 960p cctv camera model
Answer:	Yes you can, so far this product works for all brands of cameras I've used with bnc.
Question:	Does anyone know where I can purchase a replacement power supply? Mine burnt out
Answer:	If it is 12vdc, as long as the coaxial plug is correct almost anything will do if the current capability is sufficient.
Question:	Can you access the camera menu from this viewer
Answer:	I don't think so, it is basically a monitor of the camera's image. Great for focusing and getting correct angles when installing cameras.
Question:	How well does this work with IP cameras? I need that funcionality if I am going to purchase this
Answer:	This is for analog cameras. You can test Ethernet cable with it, but it wont connect to IP cameras directly. A device like that cost a bit more.

• 🎥 5 inch IPS touch screen,1920*1080 resolution,4K 30fps HDMI input and VGA input, silicone protective shell. H.265/H.264,4K video display via mainstream,8MP TVI CVI AHD camera test, support UTC & call OSD menu,CVBS camera test, PTZ control
• 🎥 Built-in WiFi,support WiFi camera test ,Hikvision,Dahua and Uniview test tool etc,Upgrade Rapid ONVIF,create testing report,Auto HD app,auto recognize HD coax camera type and resolution
• 🎥 This CCTV tester is DC12V 3A,48V PoE power output, RJ45 cable TDR test, cable quality test. Rapid ONVIF, auto view video, and create testing report.
• 🎥 This IP camera tester Equipped with 7.4 V/3350mAh Li-ion Battery, 3-4 hours charging time, working time lasts 6 hours, add LED light, it is convenient to work in dark
• 🎥 CCTV installers often need to carry a variety of testing tools to complete their work. Koolertron Camera Tester is designed for maintenance and installation of IP analog, HD coaxial cameras as well as other security equipment. The unit supports many ONVIF PTZ and analog PTZ control, and cable test functions. Perfectly compatible with this work.

User questions & answers

Question:	How do you add apps
Answer:	Connect to wifi, then download the app, or install the apk directly. If you have any problem ,pls feel free to contact our customer service email "[email protected]"
Question:	Can the tester preview the h.265 or h.264 encoded ip camera images
Answer:	Yes. (Using "Rapid ONVIF" software) Our tester can preview the H.265 and H.264 encoded camera images, and the previewed camera image resolution is up to 4K. The common 4K resolutions include 3840 × 2160, 4096 × 3112, 3656 × 2664, etc. In addition to the preview image, it also supports PTZ control and modify the parameters of IP camera.
Question:	Does the tester support foreign languages
Answer:	Yes, at present, our tester has built-in languages of 14 countries. If you switch languages, the text in the system interface will be changed to the corresponding language.
Question:	Can the tester measure the cable quality of network cable
Answer:	Yes. (use "network cable TDR test" software) Our tester can test the attenuation of network cable line, and can help judge the quality of camera signal transmission cable in engineering maintenance.

• 7 inch IPS touch screen 4K H.265 IP Full 4K All in One IPC Tester Support Up to 8MP TVI/4MP CVI/5MP AHD Cameras test, Support H.265 & H .264 Up to 4K IP Camera test, Support CVBS camera test and PTZ control, H.265 & H .264 IP, 4K video display via mainstream
• 8MP TVI/CVI Test, 5MP AHD Test, Rapid ONVIF, Auto log in and display image, create testing report, Support AXIS, Hikvision camera test, enter ONVIF app, input username and password to test, With IPC TEST (Non-ONVIF test), HIK test tool (Hikvision camera), DH test tool (Dahua camera),IP discovery, just by one key to detect all network cameras IP address,Rapid video, just by one key to detect all network cameras and auto display
• DC12V 3A power output, PoE DC48V power output, Max power 24W, support 10/100/1000M Ethernet test, network state and traffic display, PING test, IP address scan, port flashing etc, With Audio in, support record and save the audio/LED lamp, calculators, music players and other application tools
• Improvement cable tester, UTP cable, telephone cable etc order and connectivity test, can save testing report, if special number, need customized RJ45 cable TDR test, test cable pair status, length, attenuation, reflectivity, impedance, skew etc
• Built in Wi-Fi ,display image from the wireless camera , create WIFI hotspot

User questions & answers

Question:	Where can I buy additional cable test modules
Answer:	contact the seller. I asked about new battery which I really don't need but just wanted to know and they replied they would sell me what I need.
Question:	What is the warranty on this product
Answer:	my unit was 1year
Question:	Will it tell me if a poe injector is putting out
Answer:	Yes
Question:	Is it capable with Bolide and Axis cameras
Answer:	yes

Product description

ZUEXT 4-in-1 CCTV Camera tester can work with 720P/960P/1080P/3MP/4MP/5MP Coaxial AHD Camera, TVI camera and CVI Camera, 960H/1000tvl/1200tvl traditional analog CVBS Camera from almost 99% brands on the current market. Through DC power out enables user to inspect or correct camera or confirm installation. It's convenient for video equipment that helps communication with clients during installation



Overview :

1.RoHS & CE certified

2. User can check the details of camera video during the process of installation

3. 12V 1A DC power output function for audio test can be helpful when no external power supply for the camera

4. Built-in rechargeable 3.7V 2600mAh Lithium battery, each 4 hours recharge lasts 7 working hours

5.Video test Automatically identification with access AHD/TVI/CVI/CVBS Video signal

6. Network cable test

7. RS485 Interface with PTZ control



Specifications :

LCD Monitor Image Resolution: 5MP, 5.0 Mega Pixels

1CH BNC Video Input

External power supply: DC 5V(1A)

Support input audio signal and play on the internal speaker

LCD Brightness/Contrast/Color Saturation are adjustable

PTZ Protocol: Supports more than 20 PTZ protocols (PELCO-P, PELCO-D, SAMSUNG etc.)

Automatically recognize PAL/NTSC system format

OSD Language: English / Russian/ Deutsch/ Espanol/ Portugal/ Italian

Working Temperature: -20¡ãC ~ 70¡ãC



Power Saving Features:

Low power consumption, automatic power off, Real-time display of battery level

Auto power off: Disable / 5-60 minutes



Package :

1x 5 Megapixel Portable Wrist Band 4.3 inch LCD Monitor CCTV Camera Tester

1x 2600mAh Lithium Battery (Built-in)

1x 5V 1A Adapter

1x Wrist Strap

1x BNC Video Cable

1x Micro USB Cable

1x A/V Cable

1x Power Output Cable

1x Manual

• 5.0MP 4.3 INCH LCD SCREEN 4 IN 1 PRO CCTV TESTER: ZUEXT hybrid camera tester is able to test and debug coaxial 720P / 960P / 1080P / 3MP / 4MP / 5MP AHD camera & TVI Camera & CVI camera & traditional CVBS analog camera like 960H 1000tvl 1200tvl security camera; with video display, DC 12v output power, Audio test, and multilingual OSD; The LCD screen video monitor with 5.0 Megapixel high resolution can show clear image when troubleshooting a security camera system
• LONG WORK TIME: built in 3.7V 2600mAh rechargeable Lithium battery with UTP cable testing, analog video test, LED emergency lighting; Each 4 hours recharge lasts 6-7 work hours. DC 5V 1A power adapter also supplied for charging.
• APPLICATION: Powerful to test UPT/LAN cable, measure the connecting status, display the sequence of connection and the NO. of the LAN cable, inspect camera quality, correct faraway installation, etc. The brightness and contrast and color saturation can be adjusable,It also can be used for charging mobile phone.
• PTZ CONTROL: Compatible with multiple PTZ protocols (PELCO-D / PELCO-P etc.); baud rate: 1200, 2400, 4800, 9600, 19200 (optional), zooms in/out the lens, adjusts the focus, aperture/sets/calls the preset position, PTZ continuing rotate test.
• PORTABLE DESIGN WITH 1 YEAR FREE WARRANTY: This new camera tester was designed with palm size and portability which make it simple for a cctv technician or installer to install and maintain CCTV systems, improving work efficiency by reducing time in the field; Best cost effective equipment for camera installation and inspection.

User questions & answers

Question:	I missed place the operation manual, i need to get a copy so i can do osd
Answer:	I can send to you pictures of the user manual if you need
Question:	can this be used to display 1080i or 1080p signals from a professional camcorder (Sony XD cams or similar
Answer:	Yes with the proper wiring
Question:	Does it automatically select tvi/ahd/cvbs/cvi? or do you manually select the camera type
Answer:	You have to select the camera type.
Question:	What is the warrenty on this thing as the coax connection broke after 2 months and 4 uses
Answer:	Hi Sir/Madam, Thanks for your interest in ZUEXT 5MP 4 in 1 CCTV Tester. Our warranty is 2 YEARS for free replacement. You had written to us via Amazon, and we had resend you a second one, right? If not received the free replacement, pls kindly contact us again via Amazon. Any other questions pls feel free to contact us. BR, Seller ZUEXT

Product description

IPCXA

Note:this item doesn't support to test AHD,CVI,TVI,SDI,HD coaxial camera.

this item doesn't support HDMI input.

1.Support IP camera max up to 6K and Analog camera(exclude HD analog cameras:TVI,CVI,AHD,SDI).

2.Support PoE 48V, DC5V 2A, DC12V 3A,DC24 1A output.

3.Support Onvif standard protocol, compatible to most cameras in the market.

4.Screen resolution: HD IPS 1920 × 1200, instant image transmission.

5.IP discovery tool, it is used to scan the whole network segment IP, and auto-modify tester’s IP address.

6.Open source, can install Android software.

7.H265,H264, MPEG4 network camera main stream test.

8.HDMI output, 1080P.

9. With Built-in manual book and Browser.

10.Support wireless WIFI(10M/100M/1000M) and hotpots, easily connect and test wireless WIFI camera.

11.RS485 Port: Receive, send and analyze data, used for PTZ protocol analysis, etc.

12.Network tools: to scan all the IP address in the network, and test current network condition and PING value.

13.It can update software on line on store.

14. Support to take snapshot at any time and the image can be modified 8 times.

15. Rechargeable 7000mA / 7.4V polymer lithium battery. Working hour:6~10 hours.



If you have operation issues, please don’t hesitate to contact with us.

• 7 inch 1920*1200 HD resolution IPS touch screen, with rechargeable 7000mA / 7.4V lithium battery
• Support IP camera max up to 6K and Analog camera testing, HDMI Output
• It Outputs DC 5V/12V/24V and PoE 48V for camera power supply
• PTZ control:Receive, send and analyze data, used for PTZ protocol analysis, etc
• H265,H264, MPEG4 network camera main stream test

User questions & answers

Question:	Will it work with tvi/ahd/cvi cameras
Answer:	I can’t get it to work with a TVI camera
Question:	Can the tool debug a hikvision or dahua camera
Answer:	yes. it is compatible to it
Question:	Is it rechargeable
Answer:	yes, it works with a 7000mHa polymer lithium battery.
Question:	Can I take a picture by the tool
Answer:	it can take screenshots

Product description

Overall:

The 4 inch IPS IP camera tester with keypad is designed for maintenance and installation of IP analog, HD coaxial cameras as well as other security equipment. The 800*480 resolution enables it to display network HD cameras and analog cameras in high resolution. The unit supports many ONVIF PTZ and analog PTZ control. the all in one camera tester can make a safer working conditions and increase productivity.



Features:

*4 inch touch screen, 800*480 resolutions

*H.265 & H .264 IP, 4K video display via mainstream

*Rapid ONVIF, Auto log in and display image, create testing report

*AXIS, Hikvision camera test, enter ONVIF app, input username and password to test

*8MP TVI/4MP CVI/5MP AHD

*CVBS camera test and PTZ control

*IPC TEST (Non-ONVIF test), HIK test tool (Hikvision camera), DH test tool (Dahua camera)

*IP discovery, just by one key to detect all network cameras IP address and auto display

*DC12V 3A power output

*PoE DC48V power output, Max power 24W

*Innovative coaxial HD focus, video signal quality test

*10/100M Ethernet, network state and traffic display

*Portable design, portable and easier to carry

*Network tool: PING test, IP address scan, port flashing etc

*Drop-down menu, can select Poe power, IP setting, CVBS, LAN info etc

*Self -update software, you can install apps with android version

*Media player, 4K video files and MKV/MP4 media files play

*PTZ control supports more than 30 protocols such as PELCO-P, PELCO-D, and SAMSUNG

*Audio in, support record and save the audio/LED lamp, calculators, music players and other application tools

*7.4 V /2400mAh Lithium Ion Polymer Battery, after 4~5 hours charging, working time lasts about 8 hours

Packing List:

1) Tester

3). Adaptor DC12V/1A

4) 1pcs Battery 5). Tool bag / DC12V Power cable/BNC cable/ RS485 cable/ Audio cable

• 5 In 1 Tester Support Up to 8MP TVI/4MP CVI/5MP AHD Cameras test, Support H.265 & H .264 Up to 4K IP Camera test, Support CVBS camera test and PTZ control,
• Rapid ONVIF, Auto log in and display image, create testing report, Support AXIS, Hikvision camera test, enter ONVIF app, input username and password to test, With IPC TEST (Non-ONVIF test), HIK test tool (Hikvision camera), DH test tool (Dahua camera),IP discovery, just by one key to detect all network cameras IP address,Rapid video, just by one key to detect all network cameras and auto display
• DC12V 1A power output, PoE DC48V power output, Max power 24W, support 10/100/1000M Ethernet test, network state and traffic display, PING test, IP address scan, port flashing etc, With Audio in, support record and save the audio/LED lamp, calculators, music players and other application tools
• 4 inch screen, 800*480 resolutions, With Keypad, Handheld design, portable and easier to carry, 7.4 V /2400mAh Lithium Ion Polymer Battery, after 4~5 hours charging, working time lasts about 8 hours
• Support PTZ Control Hikvision coaxial, PELCO-C coaxial，Hikvision，Pelco-D/P，Samsung，Panasonic，Lilin，Yaan etc more than 30 protocols

User questions & answers

Question:	Can you have the poe camera plug into the tester along with the lan at the same time
Answer:	Yes
Question:	Will I be able to view and adjust a IP camera
Answer:	yes