11 best motion detector sensor

Product description

The SL-5407-BZ replacement motion sensor detects motion in a 180-Degree arc up to 70-Feet.

• Detection Range: Adjustable up to 70 ft. (21m), varies with surrounding temperature
• Sensing Angle: Up to 180-Degree
• Electrical Load: Up to 500 Watt (4.2A) Maximum Incandescent, up to 250 Watt maximum each lamp holder
• Power Requirements: 120 VAC, 60 Hz
• Operations: TEST, AUTO and MANUAL Mode, 1, 5, 10 Minutes Time Delay

User questions & answers

Question:	Does this come as pictured with the mounting stub or is it just the sensor? Thanks
Answer:	The white part is a shell for this sensor, and these are packing in one paper box. There is no other case / enclosure. Thanks
Question:	Can I use two of these in paralled to work one light? I want to mount them on the corners of a garage and turn on one central light
Answer:	No, you just need remove the cap Here is the picture http://s5.ecpperp.com/flyfun/data/upload/160624/FZ0057-05.jpg
Question:	Can you disable the dusk to dawn setting
Answer:	It is 2.54mm pitch on the 3 header pins. Thanks
Question:	does it come on during the day when detecting motion or just after dark
Answer:	It's configured with a photo resistor so it doesn't trigger during daylight. In my application I want mine to trigger anytime someone enters the bathroom, so I jumped it out of circuit. If you hold the board with the potentiometers up there is a row of resistors just below them. The one on the right being the photo transistor. The the body is clear, so it can detect light, that makes it easy to spot. It's placement on the opposite side of the board than that of the sensor, kind of makes it worthless.

Product features

Heath Zenith 180 Degree Motion Sensor Replacement, Bronze

The 180° Universal Replacement Sensor has a bronze weather resistant housing. It has an adjustable range up to 70 ft. with a 180° range of motion detection. It has a selectable light timer that can be set for 1, 5 or 10-minutes. Has a daytime shut off, sensitivity adjustment and automatic power outage reset.

Product description

Heathco Hz-5316-Wh Motion Snsr Replc W

Got a floodlight with a broken motion sensor or want to upgrade for greater detection range? The Heath Zenith SL-5316-WH-A gives you a 240-degree sensitivity zone, and the range is adjustable from 15 to 100 feet (the low range is convenient if you don't want your light going off every time a car drives by). It also features "Dual Brite" lighting, which means you can use it for low-level accent lighting in addition to the full-light effect you get with motion-activation. An included timer allows you to set low-light mode for three hours, six hours, or dusk to dawn (an automatic photocell deactivates the unit in daylight). You can also turn the light on and off at will via the manual override that mounts to an existing indoor switch. Requires 300 watt bulb. Ten-year warranty.--Josh Dettweiler

What's in the Box

Motion sensor, mounting kit

• Wide-angle motion sensor converts existing light into dusk-to-dawn security light
• 240-degree motion sensor, up to 100 feet detection range and adjustable sensitivity
• 2-level lighting: timed, low-level accent light or dual bright feature, with a built-in timer.
• Heavy die-cast metal housing, easy to install, works with 300-watt bulb (sold separately)
• 2-year limited warranty

User questions & answers

Question:	Will this motion detector sensor work with a hyperikon led wall pack, 5000k, 50 watts shown here? https://www.amazon.com/gp/product/b07g4lkkvd/ref=p
Answer:	I have no idea. I hooked it up to my lights and it works. No problems.
Question:	can this motion detector be wired to a switched circuit to be operated with a switch to turn on and off as well
Answer:	I don't know why it couldn't be. I have my motion detector on a switched circuit. I rarely turn it off, but occasionally I do.
Question:	Does this sensor have a dusk to dawn setting
Answer:	Yes, in fact it switches to a low- light mode at dusk or you can set to turn off totally at three hours, six hours, or to stay on low light dusk to dawn.
Question:	Will it work with CFL and/or LED lights
Answer:	I can confirm this works with at least one type of dimmable LED bulbs: https://www.amazon.com/gp/product/B00WNSE0BC/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

Product features

Heath Zenith 240 Degree Motion Sensor Replacement, White

The 240° Universal Replacement Sensor has a white weather resistant housing. It has an adjustable range of up to 100 ft. with a 240° range of motion detection. It has a selectable light timer and patented DualBrite 2-level lighting technology for energy efficiency.

Product description

The Westek MLC12BC-4 eliminates the need to fumble in the dark for a switch or pull string. This light control allows you to turn on lights, radios, and other small appliances in the home when motion is detected and can be programmed to turn off after 1, 2, 5, 10, or 20 minutes. The motion lens can either be mounted on a wall or placed in the included weighted base to sit on a table, counter, or any flat surface for optimal positioning. The sensor has a wide, 100° detection zone and can detect motion up up to 25 feet away, making it perfect for laundry rooms, garages, living rooms, basements or attics.

From the Manufacturer

Due to continuing product development, the product you receive may look slightly different than the one displayed.

• PROGRAMMABLE LIGHT CONTROL - Allows you to turn on lights, radios, and other small appliances in the home when motion is detected and can be programmed to turn off after 1, 2, 5, 10, or 20 minutes.
• MOTION ACTIVATED - 100 degree detection zone detects motion up to 25 ft away. Eliminates the need to fumble in the dark for a switch or pull string.
• WALL MOUNTABLE - Can either be mounted on a wall or placed in the included weighted base to sit on a table, counter, or any flat surface for optimal positioning.
• EASY-TO-USE - Simply plug the motion activated light control into a wall outlet and plug your lamp/device into light control. Position the motion sensor so it faces area you wish to sense motion and it is ready to use.
• PRODUCT DETAILS - 6 foot cord. For indoor use only. 120V 60Hz. 10A General Purpose. 240W Tungsten. ETL Listed Intertek 3154847.

User questions & answers

Question:	Does it work in the dark
Answer:	There is a red led sensor that lights up inside the unit, but it is behind a white mylar window. I've not been able to see it from outside the unit even in the darkest night. Only when the cover is up for testing or adjusting. No one knows it is on my gate pillar where it is hidden. I would definitely recommend this unit. I've had one for 10+ years.
Question:	Could I use this to power off a fan when triggered. and then have the fan turn back on after motion is not detected
Answer:	I'm not familiar with that Model but I can tell you that for $29 you can purchase a HT (Baofeng UV-5R) that you can program to receive the signal from the Dakota Alert unit. The Dakota systems use a common VHF signal that you can pickup with any VHF HT its called MURS frequencies - hope this helps.
Question:	Is there also a light sensor so if you plug in a small LED lamp it will only come on only when the room is fairly dark
Answer:	No. The 3000 Series and MURS are different units and are not compatible.
Question:	How is the sensor unit mounted
Answer:	You can use any brand of VHF high radio if you can set it to the MURS channel(s) and optional tomes of your choice. Ch1 151.820/Ch2 151.880/Ch3 151.940/Ch4 154.570/Ch5 154.600. Channels 1-5 are narrowband on Dakota brand radios. I use BAOFENG UV5R radios, they are programmable and inexpensive. Just be sure to have them programmed correctly to keep it legal.

Product description

Cooper Industries MS180 Adjustable Motion SensorCooper Industries MS180 Adjustable Motion Sensor Features:Durable high-impact non-metallic sensor head is weather resistant and provides years of trouble-free serviceEasily installs to one or more existing lights30 motion detection zones, the most of any brandTurns lights on automatically when motion is detected; detects motion at 180 Degree and up to 50 'Adapts to most wall and eave mount applicationsConvenient tool-free sensor head adjustmentAdjustable time and sensitivity settingsPower outage protection, saves energy by automatically resetting at dawn if lights are triggered by power interruption4 or 12 minute time delayApproximate coverage area of 7,600 square feet

From the Manufacturer

180 Degree Replacement Motion Security Floodlight Sensor.

• 180 degree detection zone up to 70 ft.
• Integral photo cell prevents lights from turning ON with motion during daylight hours (auto modes)
• Motion sensor turns lights ON automatically when motion is detected and OFF after a preselected time delay (4 or 12 minutes)
• Turns lights on automatically when motion is detected; detects motion at 180-degrees and up to 70 feet
• Adapts to most wall and eave mount applications

User questions & answers

Question:	The photo doesn't show any wires. Will there be wires
Answer:	JL,Yes....though the photo doesn't show it, there are three wires included in this unit. One goes to the "hot" wire of the circuit, one goes to the neutral of the circuit, and one goes to the load or light you wish to activate. Pretty much any of these replacement sensors are configured this way, although, if you read my review, I do not recommend this one, because of a variety of issues. Rest assured though, for about 3 or 4 dollars more, you can obtain a Heath/Zenith unit, which will work much better.
Question:	Does it come in white? Mycondo requires matching colors
Answer:	Yes it does come in white, but I don't have the white version. You can get it through another vendor I think. Thanks!
Question:	Does it work with regular led lights or only with dimmable leds
Answer:	This sensor works similar to a simple on and off switch. If it is dark and motion is detected it turns on. After a set period of time it shuts off. The load is irrelevant as long as it does not exceed 300 watts. So yes, this will work with both dimmable and nondimmable LED bulbs however, you will not be able to dim the dimmable bulbs.
Question:	has temperature compensation
Answer:	It may have temp compensation but locating it over an opening that is venting a pool area is beyond what the design is set up for. Ron
Question:	Does this come as pictured with the mounting stub or is it just the sensor? Thanks
Answer:	It comes with the mounting stub as pictured. The mounting stub is the standard size for attaching to an electrical box (there are any number of options as to what size and style). I purchased this unit about a year ago and it has functioned flawlessly.
Question:	Can I use two of these in paralled to work one light? I want to mount them on the corners of a garage and turn on one central light
Answer:	My guess is you will burn them out. i tried this once with a water circulation pump (no light in the circuit) connected to a relay. A friend of mine had 3 of these in 3 different bathrooms in his house. the thought was as soon as someone walked into a bathroom, this device would activate a pump which would circulate hot water from the water tank to the fixtures (and hence the cold water in the line back to the tank for heating). We took precautions. first we made sure the power going to the 'hot' and neutral side of the sensors were from the same breaker (otherwise you could accidentally send 240 volts to the load if the sensors were on different sides of the line coming into your breaker panel). Second, we used a relay (mentioned earlier) as 'the load' because the draw (in amps) of the circulation pump was more than the sensor would allow as a pass though (you have to pay attention to the current these things will allow... watts, amps, miliamps - all need to know stuff! - we could have hooked it up directly, but it would have burned them out in short order, not to mention create a fire hazard). Finally, we ran all three of the load wires back to one junction box, tied them together with a wire nut (to complete the parallel connection you are talking about), and connected the load to the trigger side of the relay. we walked in each room and sure enough, the motion sensor engaged the relay, and the motor kicked on and the water circulated as designed. we thought we were home free. after about 2 months, we noticed one of the sensors was no longer activating the relay (and the pump did not run). we could eliminate the motor as it was completely separated from the electrical path. we discovered one of the motion sensors had burned out. replaced it, and all was well, and then a month later, a motion sensor from ANOTHER bathroom burned out. the relay hardly drew any power, so it couldn't be that. then we separated all of them and had three separate relays to engage the pump - never had another issue with burn-out. so what happened? we think if a person 'tripped' the motion sensor, it sent 110 volts to the load side of the other sensors (which were not activated by motion), and that 'back flow' of power messed up the electronics inside the sensors not in use. only explanation that made sense. so long story short, you could connect them in parallel, but i think they would burn out because of a 'back flow' between the devices. when we separated them with individual relays - no problems. e-circulation pump would have drawn more amps than the sensor allows to pass through we ranf the 'load' side of
Question:	Can you disable the dusk to dawn setting
Answer:	yes
Question:	does it come on during the day when detecting motion or just after dark
Answer:	If your application requires it to work during the day just put electrical tape over the photo sensor and it works 24/7. I used sensor to activate a fountain pump 24/7

Product features

Heath Zenith 180 Degree Motion Sensor Replacement, Bronze

The 180° Universal Replacement Sensor has a bronze weather resistant housing. It has an adjustable range up to 70 ft. with a 180° range of motion detection. It has a selectable light timer that can be set for 1, 5 or 10-minutes. Has a daytime shut off, sensitivity adjustment and automatic power outage reset.

EATON Lighting MS180 180 Degree Replacement Motion Security Floodlight Sensor

180° Motion sensor. Motion sensor turns lights ON automatically when motion is detected and OFF after a pre-selected time delay (4 or 12 minutes). Integral photo cell design prevents lights from turning ON with motion during daylight hours (auto modes). Power outage protection: saves energy by automatically resetting at dawn if lights are triggered by power interruption.

• Motion sensor detects motion 180° up to 70 ft.
• Maximum load of 300 Watts

Product description

Leviton RS110-10W 110D OUTDR SNSR WHT

From the Manufacturer

Leviton offers many products that will help lower electrical costs and add convenience to everyday living. Passive Infrared (PIR) outdoor motion sensors provide outstanding value in security lighting, convenience, safety and energy savings for a wide range of commercial and residential applications. Easy to install and adjust, they automatically turn on lights in response to the slightest motion. Leviton 500W, 120 Volt AC 60Hz, PIR, 110 Degree, 2500 Square Feet Coverage, Outdoor Occupancy Sensor, Residential Grade, White.

• Ideal for a wide range of residential settings including backyards, garages, entranceways, porches, swimming pool areas, doorways and private docks
• Sensor neck adjustment allows accurate area monitoring: 110 degrees vertical, 180 degrees horizontal, 110 degrees rotational
• Adjustable delayed OFF time settings from 20 seconds (for test mode) to 15 minutes
• Adjustable sensitivity reduces false triggers
• Provides Automatic, Test and Continuous Modes: Test Mode simulates automatic operation with short delayed OFF time for ease of making adjustments. Continuous Mode enables manual override for constant lights ON operation

User questions & answers

Question:	any way to disable the light sensor so that it always activates lights by motion
Answer:	Although there is an adjustment to light level needed to activate the light, you can't completely override the need for some darkness for activation. The light sensor on this model is inside the sensor head and can't be physically blocked, so the answer is no.
Question:	Can you connect to multiple lights at once
Answer:	Yes but you have to know how to do wiring. The device will not handle more then 500 watts. So it will also depend on the lights you use. My advice is to go with a LED light source and I did so you never have to worry about the wattage. Once again how you do your wiring between devices is where you control how many devices you add on not the Leviton unit.
Question:	Does it have a light sensor so that it will not turn on during daylight hours? Seems like it should
Answer:	Yes. No light in daylight
Question:	How would I mount the motion sensor by itself, rather that to a light fixture? Is there a piece of hardware that goes with it
Answer:	As an electrician, you would use either a round or rectangular weatherproof box with a weatherproof cover. The box or cover needs to have a 1/2 inch hole so you can screw the sensor into. Also, if the sensor has a locknut with it, screw the locknut onto the sensor, then srcew the sensor into the box or cover a turn or two, using the locknut to put tension on the box or cover so the sensor can be positioned the way it needs to be without being loose. I hope you can make sense out of what I am saying.

Product description

Lutron Maestro Motion Sensor Switch, No Neutral Required, 250 Watts, Single-Pole, MS-OPS2-WH, White.

From the Manufacturer

Let Lutron's Maestro Occupancy Sensor switch turn the lights on and off for you. It's a simple, easy, and low cost way to save energy and add automation to your home. Install a Maestro Sensor and lights turn on when you enter the room, and then turn off automatically after you leave. This sensor features Advanced XCT Sensing Technology which detects fines motion, such as desk activities or reading, ensuring lights do not turn off inadvertently. Equipped with ambient light detection, your sensor can detect daylight so lights don't turn on when enough natural light is in your room. Keeping the sleek design of the Maestro family, Lutron sensors will match the decor of any room in your home. Install it in the laundry room for added convenience when your hands are full, or in the garage rooms and never worry about lights being left on by mistake. Maestro Sensors works with any bulb type, including CFLs and LEDs. This switch can also be easily programmed to function as a vacancy (manual-on) sensor.

• Automatically turns the lights on when you enter the room and off when you leave
• Features XCT sensing technology which detects fine motion, such as typing at a desk or reading, ensuring lights do not turn off inadvertently
• Optional: senses daylight so lights do not turn on when there is enough natural light in the room
• Programmable time-out of lights - 1, 5, 15 or 30 minutes
• Works with all bulbs types; up to 250-Watt incandescent, halogen, electronic low voltage 200-Watt magnetic low voltage 150-Watt CFL/LED 2 Amp ballasts
• Single-pole only; great for small rooms like kitchens, laundry rooms and closets
• Installs in as little as 15 minutes; no neutral required
• Includes maestro sensor switch; coordinating wallplate sold separately

User questions & answers

Question:	How do I know if I need this 250W or the similar 600W switch? Are they interchangeable
Answer:	Depends on use. Lights and Ceiling fans, 250w is fine. If you have a Electric ceiling heater That requires more watts, then the 600w I would use. Hope this helps.
Question:	Will the motion sensor be set off by a small (toy size - 10 lbs) dog
Answer:	I have mine installed in a small walk-in (6 ft x 5 ft) closet and my 10 lb cat triggers it all the time, kind of annoying when it happens at 1 am. I just close the door to preven this from happening.
Question:	Will this work as... Enter room and I manually turn on the light and then the unit automatically turns off the light after a set time of inactivity? I only want it to turn off the light
Answer:	Follow up question on the previous answer....So if the unit turns off the light, is the actual switch toggled back to the "off" position? So that the next time someone walks in the door, they have to again toggle the switch back to the "on" position?
Question:	I don't get the,"No neutral required." A neutral is always required. What am I missing here
Answer:	I was an electrical engineer for Lutron back in the 1980's. Many dimmers and electronic switches like this one do not require a neutral wire to work. This is not a mechanical switch but an electronic one. It uses a silicon switching device called a triac which turns the light on and off 120 times per second, just like every dimmer ever made. During the brief period 120 times/second when the triac is off, the device draws a small amount of power through the light bulbs it controls, and uses this small amount of power to charge a capacitor, which you can think of as a rechargeable battery. Thus there are many wallbox products, such as most dimmers, that do not require a neutral wire to operate. Nor does it put any power intentionally to ground, which would be against the electrical code and thus could not be sold. The reason other companies require a neutral wire is because they were not designed by companies that also make dimmers as their engineers probably do not realize the device can be designed to draw sufficient power using a triac instead they use a relay, which would produce an audible click when switched on, where as a triac device would make no sounds when turning on and off. Hope this helps.
Question:	Does this come as pictured with the mounting stub or is it just the sensor? Thanks
Answer:	It comes with the mounting stub as pictured. The mounting stub is the standard size for attaching to an electrical box (there are any number of options as to what size and style). I purchased this unit about a year ago and it has functioned flawlessly.
Question:	Can I use two of these in paralled to work one light? I want to mount them on the corners of a garage and turn on one central light
Answer:	My guess is you will burn them out. i tried this once with a water circulation pump (no light in the circuit) connected to a relay. A friend of mine had 3 of these in 3 different bathrooms in his house. the thought was as soon as someone walked into a bathroom, this device would activate a pump which would circulate hot water from the water tank to the fixtures (and hence the cold water in the line back to the tank for heating). We took precautions. first we made sure the power going to the 'hot' and neutral side of the sensors were from the same breaker (otherwise you could accidentally send 240 volts to the load if the sensors were on different sides of the line coming into your breaker panel). Second, we used a relay (mentioned earlier) as 'the load' because the draw (in amps) of the circulation pump was more than the sensor would allow as a pass though (you have to pay attention to the current these things will allow... watts, amps, miliamps - all need to know stuff! - we could have hooked it up directly, but it would have burned them out in short order, not to mention create a fire hazard). Finally, we ran all three of the load wires back to one junction box, tied them together with a wire nut (to complete the parallel connection you are talking about), and connected the load to the trigger side of the relay. we walked in each room and sure enough, the motion sensor engaged the relay, and the motor kicked on and the water circulated as designed. we thought we were home free. after about 2 months, we noticed one of the sensors was no longer activating the relay (and the pump did not run). we could eliminate the motor as it was completely separated from the electrical path. we discovered one of the motion sensors had burned out. replaced it, and all was well, and then a month later, a motion sensor from ANOTHER bathroom burned out. the relay hardly drew any power, so it couldn't be that. then we separated all of them and had three separate relays to engage the pump - never had another issue with burn-out. so what happened? we think if a person 'tripped' the motion sensor, it sent 110 volts to the load side of the other sensors (which were not activated by motion), and that 'back flow' of power messed up the electronics inside the sensors not in use. only explanation that made sense. so long story short, you could connect them in parallel, but i think they would burn out because of a 'back flow' between the devices. when we separated them with individual relays - no problems. e-circulation pump would have drawn more amps than the sensor allows to pass through we ranf the 'load' side of
Question:	Can you disable the dusk to dawn setting
Answer:	yes
Question:	does it come on during the day when detecting motion or just after dark
Answer:	If your application requires it to work during the day just put electrical tape over the photo sensor and it works 24/7. I used sensor to activate a fountain pump 24/7

Product features

Heath Zenith 180 Degree Motion Sensor Replacement, Bronze

The 180° Universal Replacement Sensor has a bronze weather resistant housing. It has an adjustable range up to 70 ft. with a 180° range of motion detection. It has a selectable light timer that can be set for 1, 5 or 10-minutes. Has a daytime shut off, sensitivity adjustment and automatic power outage reset.

Lutron Motion Sensor Switch

Maestro occupancy/vacancy sensors automatically turn lights on when you enter a space and off when you leave, making them a convenient way to save energy and add simple automation to your home.

Garage

Lutron sensors are great when your hands are full and you can't easily reach the light switch.

Laundry Room

It's laundry day and clothes are piled high. Sensors installed in the laundry room gives you one less thing to worry about.

Kids Bedroom

Do you have forgetful children? Install a motion sensor and never worry about your kids leaving the lights on again.

• [PIR Motion Lights and No Dim Mode]- Designed with No dim mode to increase product life span. When motion is detected within 3-5m, the motion sensor lights will turn on automatically in darkness or at night, which provides your illumination for security and safety protection.
• [28 LED Ultra-Bright Solar Powered Lights]-There are 28 powerful LEDs and the motion angle is 120 degrees which can provide excellent illumination and turn the dark space into a bright lighted space. With a lampshade covering the led, well designed to longer its performance life.
• [High Efficiency and Eco-Friendly]- By exposure to sunlight for around 8 hours in daytime, the solar light is able to work for you by motion detecting at night.
• [Waterproof IP65 and Durable]- The solar outdoor lights is water resistant and heat-resistant. A great solar security light for outdoor patio, garden, deck, yard, drive, outside wall, fence etc
• [After service Policy]- We promise a 30-Day Full Refund Policy and 180-Day Limited Product Guarantee Period.

Product features

BAXIA TECHNOLOGY 28LED SUPER BRIGHT SOLAR MOTION SENSOR WALL LIGHTS [4-PACK]

Solar Powered Lights,Energy Saving and Money Saving

The light is charged by sunlight at daytime and work at darkness or night when motion detected.

wireless,energy saving and money saving.



Upraged 28 LEDs with 400LM,Bright Enough for Your Garden

Upraged 28 LEDs and 400lm,super bright for your yard,garden and pathway.



Solar Security Lights,with ON/OFF Mode

The lights designed with NO DIM MODE,to extend the work time and life span.



Small Size With Wide Motion Angle

With a size of 4.33*5.11*2.67", the motion lights turn on automatically when detect a angle of 120º and distance of 10ft.

and turn off automatically after 30s without the motion.

Solar Step Lights

The wireless light can be installed at the steps/stairs.

Solar Pathway Lights

Solar powered light suitable for your pathway,outdoor gate.

Solar Yard Lights

Bright led light,enjoy your way to walk around the yard.

LED Lights for Garage

Solar powered security light for your garage,parking easy.

• HOSMART ADVANTAGE-30 years+ outdoor driveway alarm wireless and driveway alert system produced in our own factory with our leading edge systems technology.Wireless Driveway Alarm Includes 1 Battery/AC Powered Base Receiver and 4 Sensors.
• EASY TO INSTALL- Quick Start Guide has you operational in minutes. Can expandable up to 4 sensors and unlimited receivers for complete coverage of your perimeter. wireless driveway alarm Detects movement from humans, cars, and large animals.Over 4 fun & unique chimes to choose from. Match different chimes with different sensors around your property to differentiate where driveway alarm wireless motion is being detected.
• SUPER LONG RECEVING RANGE - 1/2 mile (in ideal situations). Our range is double the 1/4 mile competitors claim under ideal conditions. We use newer technology components and excellent manufacturing techniques. Our system has been real world tested in settings with trees, buildings, walls, and vehicles. It easily achieves a 1500FT wireless range in most conditions. It is been tested through thick forestry, hail storms, gusty winds, heavy rains, scorching heat, and snow.
• EXCELLENT QUANLITY - Outdoor driveway alert sensor system is made with industrial grade PVC housing, rubberized weather/water resistant seal, and a sunshade.
• EXTREMELY RELIABLE - Much time went into developing and testing our reliable InfraRed outdoor driveway alarm wireless detector that will dependably alert you to activity around your property. False alarms are minimized by adjusting the sensitivity of the sensor-eye with Switch 1. (Hi = 30ft, Mid1 = 25ft, Mid2 = 20ft, Low = 15ft.) See Owners Instruction Manuel. Swivel mount to refine the focus and detection angle of the sensor. 2 YEAR WARRANTY on parts and workmanship. 90-DAY RISK-FREE OFFER

User questions & answers

Question:	Can the four sensors be monitored by two receivers in two different homes. (Homes within 50’ of each other
Answer:	I do not have two receivers, but that should work. Signal is analog not digital. Theoretically you should be able to use as many receivers as you want
Question:	I have a very long, hilly driveway. Will the sensor transmit to the base up a 25 foot hill and 1000 feet from the house
Answer:	I’m not sure about the hills but these are pretty good. I have one in my barn with metal walls using it as an alarm if anyone comes through that door and it works great.
Question:	What happens if a nearby neighbor has the same system? Do they conflict
Answer:	I purchased the 4 sensor kit. My neighbor purchased only the 2 sensor kit. When my #3 & 4 sensor activated his box would sound alarms for # 3 & 4 which he does not have.
Question:	When set to the lowest settings, if the wind blows a flower or bushes around the area they are continually setting off, can this be fixed
Answer:	If the bushes do not too close to the sensor, it wont cause going off. If the problem is not fixed, please contact us at :[email protected] Best regards, Sherry

Product features

EASY TO INSTALL

EASY TO INSTALL- Quick Start Guide has you operational in minutes! Can expandable up to 4 sensors and unlimited receivers for complete coverage of your perimeter. Detects movement from humans, cars, and large animals.

SUPER LONG RECEVING RANGE

SUPER LONG RECEIVING RANGE - 1/2 mile (in ideal situations). Radio wave propagation is affected by many things to include sun spots. No system is perfect. Our range is double the ¼ mile competitors claim under ideal conditions. We use newer technology components and excellent manufacturing techniques. Our system has been real world tested in settings with trees, buildings, walls, and vehicles. It easily achieves a 1500FT wireless range in most conditions. It’s been tested through thick forestry, hail storms, gusty winds, heavy rains, scorching heat, and snow.

EXCELLENT QUANLITY

EXCELLENT QUALITY - Outdoor sensor is made with industrial-grade PVC housing, rubberized weather/water-resistant seal, and a sunshade. Runs on one rechargeable 18650 Li- batteries for up to one year.

Fully expandable

It can expandable up to 4 sensors and unlimited receivers for complete coverage of your perimeter. wireless driveway alarm Detects movement from humans, cars, and large animals. Over 4 fun & unique chimes to choose from. Match different chimes with different sensors around your property to differentiate where driveway alarm wireless motion is being detected.

Product description

The Philips Hue Outdoor Motion Sensor automatically turns on the Philips Hue Smart Lights you want, both outdoor and indoor.The sensor detects variations in infrared radiation in its environment, allowing it to detect human movement and automatically turn on the lights (sensor motion sensitivity can be adjusted in the app). By connecting the motion sensor to your Hue hub via the Philips Hue app, you can choose which of your Philips Hue lights go on, both inside and outside your house. Also choose the scene or light setting that should be triggered. The integrated dusk-to-dawn sensor ensures your lights only switch on when it is actually dark outside helping you to conserve energy. This Philips Hue outdoor sensor is specially designed for use in outdoor environments and has undergone rigorous tests to ensure its performance. Certified by UL, the product will withstand heavy rainfall and other weather conditions.​ 160 degree horizontal/80 degree verticle view angle with 39 ft x 8 ft detection radius. Optimized for far range and close proximity (antering and leaving home). Able to fix the motion sensor on both a flat wall and corner.

• ENHANCE YOUR SMART HOME EXPERIENCE: The Philips Hue Outdoor Motion Sensor detects outdoor motion and can trigger both Philips Hue Indoor and Outdoor lights. Set your Hue sensor to welcome you or guests home with lights, or detect intruders or potential package thieves with pre-set light scenes, Philips Hue Hub and Hue Smart lights required and sold separately, Works with Apple HomeKit
• MAXIMUM SECURITY: Scare away potential package thieves or intruders, Thanks to the large view angle and detection range the outdoor sensor will spot any movement near your smart home, It can directly turn on your outdoor lights to expose intruders while turning on indoor Hue smart bulbs so it looks like you're home, even when you're not
• EXTREME RESISTENCE: Resistant to all weather conditions, this Philips Hue outdoor sensor is designed for use in outdoor environments and has undergone rigorous tests to ensure its performance. Certified by UL, the product will withstand heavy rainfall and other weather conditions,
• EASY INSTALLATION: Installed in a matter of minutes, the outdoor motion sensor is easy to mount and is fully wireless. You don’t need an electrician to have it installed. Just unpack the sensor, set it up through the Philips Hue app and install it wherever you like. Configuring the outdoor sensor and setting the daylight and motion sensitivity is also done via the Philips Hue app
• LIMITLESS POSSIBILITIES: Place the Philips Hue Outdoor Motion Sensor where you want. The kit comes equipped with different mounting components. You can mount it on a flat wall, on the inner or outer corner of a wall or post, or on a pole or rain pipe. It's perfect for front yard lighting, deck lighting, porch lighting, around the door, garage or any place around your smart home where it matters. One lens to see it all: The lens of the outdoor sensor is custom designed to detect movement directly below the sensor – for example when you step out of the door or are at a longer distance it detects you. When closely examining the lens you can see how the lens pattern changes to detect movement at close range and the upper part at long range
• UNLOCK HUE'S FULL POTENTIAL: For the full set of smart light features, add a Hue Hub (sold separately) to your smart lights to experience the full set of Philips Hue features. With a Hue Hub, you can control up to 50 smart lights throughout your home (even outdoor!). Create timers and routines to automate your entire smart home lighting setup; use your lights to wake up and go to sleep; or make it look like you're home when you're on vacation using presence mimicking features. Control your lights while away from home or add accessories such as motion sensors and smart switches to further enhance your experience. The possibilities are yours to unlock when you add the Hue Hub (sold separately)

User questions & answers

Question:	Do you have hard wired version? Normally the sensor is mounted somewhere out of reach. Why would anyone wants to change battery periodically
Answer:	No one WANTS to change a battery periodically but if there is no available outlet, it’s better than nothing. And every couple of years is no big deal. (Plus it looks much better if there is no electrical cord running down the side of your house.)
Question:	Can I use this to trigger other smart outlets
Answer:	Short answer: Yes Long answer: It depends. I don’t know how home automation works with android, but Phillips Hue is Apple HomeKit compatible. The sensor shows up as 3 sensors in the Apple Home app, motion sensor, light/lux sensor, and temperature sensor. You can create automation rules in Apple Home that can control any HomeKit compatible outlet. I don’t know if Phillips Hue has released any smart outlets (pretty sure they just do lighting), but if so then you could probably create a routine for it in the Hue app. Note: If you’re new to HomeKit, you should be aware that Apple HomeKit automation only works when you have an Apple device acting as a home automation hub. This can either be an AppleTV or iPad (that stays at home). If all you have is an iPhone, it either won’t work at all, or if it does it will only work when your iPhone is connected to your home WiFi.
Question:	How long will the battery last
Answer:	About 2-3 years
Question:	Any way to keep the floodlights on (at a dim level) and they get brighter when detecting motion. AND off altogether if it's daylight
Answer:	Glad to see there's finally a work around for this. I previously had an app (I can't remember the name) that allowed you to create logic linked to any smart platform... and also use things like the Nest Doorbell... so I had it set to: Hue came on sunset at 10% dim. If Nest detects person, set Hue outdoor lights to 100% Brightness for 30sec., then activate scene 10% dim. It worked great, but the people who developed that app discontinued it. It worked for a while afterward too but then one day just stopped. I'm so glad to see I can do this again!!! (since you can buy "dumb" lights that do this on their own with 2 level dusk dawn motion sensors)

• Excellent Brightness & Energy Saving: LED units output 40W, 3500 Lumens, 5000K brightness(day light white), equivalent to 200W halogen light. Also save your electricity bill by up to 88%. ETL certificated.
• Quick and Simple Installation: The installation is very easy, hook up is a breeze, even for a DIY'er. This LED outdoor security light can be installed by mounting to a wall and following a few simple wiring steps.
• Bring Safety to Your Home: Our LED Security lights can turn on automatically when the motion is detected with 180 degrees swiveling angle, sensing light levels and motion up to max 75 feet. Easily adjust the light heads, lens hoods and motion sensor to different angle based on your DIY requirement.
• IP65 Waterproof: The durable and weatherproof design ensures safety for outdoor use protecting lamp from rain, sleet or snow. Perfect lighting solution for garages, workshops, industrial workstations, storage rooms, equipment rooms, etc.
• 3 Mode Control: "Motion Detection" detects track ambient motion and activate lighting; "Dusk to Dawn（D2D）" functions automatically in the dark while turning off during daytimes; "Always-ON Mode", set D2D+TEST together, manually controls lights by switch.

Product features

Motion Activated

"I will take care of your child"

With Upgraded Motion Sensor, max 75ft detection range /180° sensing angle gives you great coverage for motion detection, which helps you detect cars, people and animals.

Upgraded Motion Sensor

This light can be easily set to light up your home:

Distance: you can choose detection distance from High/Medium/Low, also can set to D2D mode.

Always On: you can easily set manual mode by moving the slider to D2D and TEST together.

3 Lighting Times

This light has 3 modes of lighting time：1 minute/5 minutes/10 minutes. Most security lights being sold on Amazon are lighting less than 120 seconds. I believe our lights will give you a better experience.

Adjustable Head & Motion Sensor

This LED security light has 3 adjustable heads, you can rotate them to a positon according to your needs, so you will have more installation angle options, customize your lighting area.(Warm Tips: Make sure the motion sensor face outside when mount on soffit/eave.)

IP65 Waterproof

The professional waterproof certification ensures safety for outdoor use, protecting light from rain, sleet or snow. Perfectly for indoor&outdoor installation.

Full Aluminum Back

The exquisite aluminum head is corrosion & rust resistant and won’t faded even for decades. The excellent heat disspation ensures the light more durable for a 50000-hour long life span.

Product description

eufy Security Motion Sensor



From eufy, where privacy comes first.

Comprehensive Safety Solutions for Your Home



Protects You, Your Family, and Your Privacy

Every eufy Security product is engineered to ensure your data is kept private. Keep a secure record of everything that happens around your home.



Customizable Detection

To prevent your playful pets from accidentally triggering the motion sensor, you can adjust the sensitivity so that it only triggers when human-sized intruders are detected.



Part of the Family

Adding the motion sensor to your existing security system is a breeze. Once installed, pair the device via the eufy Security app. Then, press the button on the motion sensor, and HomeBase will add the sensor to your existing security setup.



Instant Alerts:

As soon as motion is detected, the sensor will send an alert to your HomeBase (not included), which in turn will send an alert notification straight to your phone (eufy Security app required).

• Protection That Lasts: The included battery provides up to 2 years of power for round-the-clock security. 
• Extensive Coverage: Detects motion within a 100° field of view up to 30 feet away—more than enough to secure an entire room of your home. (NOTE: This motion sensor is not waterproof.)
• Adjustable Sensitivity: Tailor the sensitivity of the motion sensor so that it only alerts when humans are in range—rather than your playful pet dog or cat.
• App Alerts: Notifies you as soon as motion is detected, sending a message to your phone via the eufy Security app, no matter where you are.
• Link it Up: Connects to eufy Security HomeBase (Not Included) and well as all other eufy Security products. Simply pair it via the eufy Security app and press the button on the sensor to add it to your system.

User questions & answers

Question:	Does it work with homebase without ai
Answer:	Yes, they can work with the Homebase without AI.
Question:	can this be used outdoors / is it waterproof
Answer:	We are sorry that it cannot be used outside.
Question:	Has anyone used it inside the mailbox to detect when somone opens it
Answer:	Sorry; it is not recommended to be used inside a mailbox.
Question:	Can this be used with Eufy security cameras? i.e. if the motion sensor is triggered, can it send a signal to Eufy camera to start recording
Answer:	Yes, this can be used with Eufy security cameras.