10 best agptek motion sensors

• ✔ Wide Range of Uses - Motion detection is an essential part of any home security solution. The waterproof sensors in this system use Passive Infrared to detect heat and movement so you can quickly be alerted to movement on your driveway, front porch, gate, shed, walkway, or even swimming pool (for when kids get too close). Great for homes, businesses, and offices.
• ✔ Long Distance Wireless - Communication range up to 1000ft/300M from each sensor to the receiver. Cars, people and animals can be detected within 24ft/8M of each sensor’s angled eye. Think of this system as your long-range doorbell.
• ✔ 3 Alert Options & 36 Chimes to Choose From - Select one of 3 ways of being alerted (Sound/LED Flash/Sound and LED Flash) and 3 volume levels from 25-80dB. Also select from 36 chimes and doorbell sounds. Be alerted to visitors, scare off unwanted intruders, or even know when your children have accessed restricted areas.
• ✔ Easy to Install & Diy - This system is fully-expandable, with plug-and-play sensors that can be set up within minutes. Pair each receiver with up to 5 sensors for full coverage of your property. The sensors can be mounted to walls, fence posts, trees, or any other surface, providing extra layers of security and home safety.
• ✔ Fully Expandable System - Our wireless driveway alarm sensor is fully expandable. Simply place your motion sensor/or multiple sensors (expandable up to 5 sensors) anywhere on your property and when a person, vehicle, or large animal moves within 24 feet of the sensor’s angled eye, a signal will be sent to the receiver that will chime in your home just like a long-range doorbell.

User questions & answers

Question:	does it have warranty
Answer:	Hello, yes, don't worry, we stand behind our products 100% with a 90-day return and 24-month If you have any questions or issues feel free to reach us directly at any time! Thank you!
Question:	Does central unit have a mute button
Answer:	it doesn't - you have 3 pre-programmed volume levels to choose from, and you can choose to have the unit alert by flashing light only, without sound...
Question:	All these questions and nobody asked this question (interesting) -Is the sensor water proof
Answer:	Yes the sensor is water proof. Mine has been through a few rain storms and it is still working as good as the day it got put up.
Question:	The two detectors will be located in two different outdoor areas of the house. Can each detector be set to activate two different tones
Answer:	Yes, you can selected a different tone to let you know which alarm went off. I had to secure the alarms with nails on either side. They are sensitive to the wind & can go off if the wind moves them.

Product features

FULLY EXPANDABLE SYSTEM

✔ Cover your property by placing additional sensors to detect motion in different areas.

✔ Never miss an alert by adding extra receivers throughout your home, garage, etc.

✔ Set includes one sensor/one receiver. Expandable up to 5 sensors and unlimited receivers for complete coverage of your property.

Wireless Transmission

The receive range is up to 1000ft (under the ideal condition).

1000 ft range which has been tested in real world settings with trees, buildings and walls in order to make true and realistic wireless range claims.

Expandable + Customizable

This system is fully-expandable, pair each receiver with up to 5 sensors for full coverage of your property.

The sensors can be mounted to walls, fence posts, trees, or any other surface, providing extra layers of security and home safety.

Weatherproof + Built to Last

Thoroughly tested to work in the most severe weather events.

Therefore, the sensor has excellent waterproof & anti-freeze functions. Suitable for both outdoor and indoor use.

Loud & 3 Alert Options

Selecting the notification mode:

The receiver will notify after the PIR sensor has detected car or someone passing by with a chime/alarm sound, flashing LED, or chime/alarm sound and flashing LED at the same time.

2 Working Mode Options

Woking as doorbell or woking as alarm.

It can detect movement in the surrounding areas - driveways, front porch, gates, home, sheds, offices, walkways, swimming pools, etc. And trigger alert to the linked receiver.

Super Easy DIY Installation

Simply plug in the receiver and mount the detector anywhere you want with screws.

Sensors are waterproof and can be mount to posts, walls, fences, and trees.The perfect alert system for home and business security.

Product description

The Westek MLC12BC-4 eliminates the need to fumble in the dark for a switch or pull string. This light control allows you to turn on lights, radios, and other small appliances in the home when motion is detected and can be programmed to turn off after 1, 2, 5, 10, or 20 minutes. The motion lens can either be mounted on a wall or placed in the included weighted base to sit on a table, counter, or any flat surface for optimal positioning. The sensor has a wide, 100° detection zone and can detect motion up up to 25 feet away, making it perfect for laundry rooms, garages, living rooms, basements or attics.

From the Manufacturer

Due to continuing product development, the product you receive may look slightly different than the one displayed.

• PROGRAMMABLE LIGHT CONTROL - Allows you to turn on lights, radios, and other small appliances in the home when motion is detected and can be programmed to turn off after 1, 2, 5, 10, or 20 minutes.
• MOTION ACTIVATED - 100 degree detection zone detects motion up to 25 ft away. Eliminates the need to fumble in the dark for a switch or pull string.
• WALL MOUNTABLE - Can either be mounted on a wall or placed in the included weighted base to sit on a table, counter, or any flat surface for optimal positioning.
• EASY-TO-USE - Simply plug the motion activated light control into a wall outlet and plug your lamp/device into light control. Position the motion sensor so it faces area you wish to sense motion and it is ready to use.
• PRODUCT DETAILS - 6 foot cord. For indoor use only. 120V 60Hz. 10A General Purpose. 240W Tungsten. ETL Listed Intertek 3154847.

User questions & answers

Question:	Does it work in the dark
Answer:	There is a red led sensor that lights up inside the unit, but it is behind a white mylar window. I've not been able to see it from outside the unit even in the darkest night. Only when the cover is up for testing or adjusting. No one knows it is on my gate pillar where it is hidden. I would definitely recommend this unit. I've had one for 10+ years.
Question:	Could I use this to power off a fan when triggered. and then have the fan turn back on after motion is not detected
Answer:	I'm not familiar with that Model but I can tell you that for $29 you can purchase a HT (Baofeng UV-5R) that you can program to receive the signal from the Dakota Alert unit. The Dakota systems use a common VHF signal that you can pickup with any VHF HT its called MURS frequencies - hope this helps.
Question:	Is there also a light sensor so if you plug in a small LED lamp it will only come on only when the room is fairly dark
Answer:	No. The 3000 Series and MURS are different units and are not compatible.
Question:	How is the sensor unit mounted
Answer:	You can use any brand of VHF high radio if you can set it to the MURS channel(s) and optional tomes of your choice. Ch1 151.820/Ch2 151.880/Ch3 151.940/Ch4 154.570/Ch5 154.600. Channels 1-5 are narrowband on Dakota brand radios. I use BAOFENG UV5R radios, they are programmable and inexpensive. Just be sure to have them programmed correctly to keep it legal.

• ◆ Light Weight & Portable Design - AGPTEK balloon pump can easily create a warm atmosphere. This electric balloon pump is commonly used in some activities/festive/party/celebration/decoration.(NOTE:This is NOT a machine for he-li-um, it is an AIR machine.)
• ◆ Fast and Efficient - This balloon inflator fits to latex balloon and decorative balloon. Double pump, balloon air pump. The balloon inflator pump has two modes: manually and automatically.
• ◆ Size - 20 x 15 x 12 (cm). This balloon air pump is designed with two modes: manual and automatic one. Pressure: 18000pa-22000pa, 1.75psi. Input voltage :110-120V. Frequency: 50/60Hz
• ◆ Product Weight - 1.3KG. Color of electric balloon pump: Rose red. Air Volume 300 (L/min). Power: 600W.
• ◆ NOT Helium Pump - This is an AIR balloon pump instead of helium pump. The balloons would NOT float in the sky. It fits to latex balloon and decorative balloon. 2 samll size nozzles included allow you to blow up the small and thin balloons at the same time.

User questions & answers

Question:	Does this pump have a nozzle that can fit and inflate small, thin balloons that are used to make animals/ balloon art
Answer:	I bought this pump for the very purpose of making balloon animals, etc. I returned it because it doesn't do the job. It would be good for round balloons but not the 160's and 260's.
Question:	can this blow up latex balloons for me to bunch together as balloon tree
Answer:	Yes ,it can,but when you use it ,you should let it rest after worlk nearly 2 hours ,otherwise, it will heat.
Question:	Does the pump allow you to inflate 2 balloons at the same time
Answer:	Yes you can. There is a spot where the air is pulled through on the side. Whoever wrote that it couldn’t doesn’t know what their talking about. It’s made so that you can blow up more than one at a time. Flip the switch and it will power both ports without stopping. One is a manual one where you have to push down on to activate the air. For the pink port to work you have to flip the switch.
Question:	Can you use this on foil and Mylar balloons
Answer:	yes you can, but is not going to flow like helium balloons.

Product features

PRODUCT INTRODUCTION

AGPTEK electric balloon pumps are suitable for advertising balloons activities and balloon decoration, party and festive scene layout. The inflation rate of this balloon pump is fast.

Fast, Efficient & Easy to Use

Simple and flexible operation on this balloon air pump, switch control inflation, classified as continuous and touch-on two patterns, the appearance of baloon inflators are lightweigh and portable designed.

More Details of Balloon Pump

This balloon pump fits to latex balloon and decorative balloon. Double pump, balloon air pumpElectric balloon pump has two modes: manually and automatically.

• ♦ DESIGN FOR CLEAR CHAT - AGPtEK headset is built-in flexible adjustable microphone which can be twisted discretionarily to pick up your loud & clear voice. Reduces unwanted background noise for clear conversation.
• ♦ DURABILITY & WEARABILITY - The headset is made of the flexible metal hose with the positioning accuracy. Helical headphone cable which will avoid damaging during the use.
• ♦ COMFORTABLE TO WEAR - This headset headphone is designed with adjustable headband and fluffy earpads pad with memory foam. Enjoy extended comfort with padded earpad and flexible headband. Also, our hearing protection technology in AGPtEK headset cares of the user's hearing.
• ♦ EASY TO USE - Direct connect over the head headset, no additional amplifiers or adapters required.
• ♦ NOTE: It is a 4-Pin RJ9 Crystal Headset, not USB headset & not 2.5mm headset & not 3.5mm, so it cannot work with computer directly.

User questions & answers

Question:	Does this work for the cisco 7945 ip phone
Answer:	Yes it works with ring central. Purchase these phones to work with my ring central service.
Question:	can this replace the handset on my home phone
Answer:	The phone did not come with a power adapter.
Question:	can i plug this into any cordless phone
Answer:	Don’t enter anything or use admin or cisco as password
Question:	The calls are so loud in my ear. i have turned the unit volume to min but don't see any way to adjust volume on the headset. any suggestions
Answer:	Selling Cisco CP-8845-K9 IP PHONE

Product description

Description:

Ideal for small offices and home-based agents in telephone intensive situations, this is a fully functioning single-line telephone with conveniently arranged controls. It is the best choice for anyone who spends a lot of time on the telephone - such as Phone sales, Telephone Counseling Services, Insurance, Hospitals, Banks, Telecom operators, Enterprises- and who wants to take up minimum desk space for a telephone/headset system.

Comfortable Monaural Design

Fully functioning monaural headphone with exquisite buttons for superior communication experience. The headset clip can be stretched freely and comfortable wear for all day use.

Be more Efficiency

An extension jack allows connection to a second phone or modem; Recording jack connects to a recording device for call monitoring purposes; The handy headset hook keeps your desk area neat and organized.

Package included:

1 x Agptek Dial Pad

1 x Monaural Headset

1 x Connect Cord

1 x Dial Pad User Manual

• ☎ Easy to Setup -- Connects this telephone headsets to existing standard telephone jack Durable construction and rigid design for greater longevity.(Please kindly note that this telephone headset is not compatible with the internet cable; You can't pick up the phone without using the headset.)
• ☎ Noise Cancellation Microphone -- Equipped with noise canceling microphone, AGPtEK phone with headset can increase the voice clarity for superior high quality sound and screen 90% background noise so as to perfectly and truly present the sweet voice of the telephone operator.
• ☎ FSK/DTMF Caller ID Display -- The dialer can ring or silent when receive incoming calls as well the phone number will be displayed. Everything included of this call center phone and headset; So you can just plug into the wall telephone port and you are ready to make and receive phone calls.
• ☎ Volume Adjustment -- Scrolling wheel volume button of the corded phones can make the control of the sound easily and allows a more flexible listening experience.
• ☎ Widely Used -- AGPtEK Corded Telephone with Headset & Dialpad is a good choice for anyone who spends a lot of time on the telephone - such as Phone sales, Telephone Counseling Services, Insurance, Hospitals, Banks, Telecom operators, Enterprises- and who wants to take up minimum desk space for a telephone/headset system.

User questions & answers

Question:	Will this work with the jabra biz 2400 II with an adaptor cable
Answer:	"Made in China" sticker on the back of my box.
Question:	Can this unit be used with magicJack
Answer:	Just connect headset top with coild connector QD002(C). Do not add any RJ adapter. After installation of headset, use speaker or headset button to activate using of headset.
Question:	How do I set up the caller ID to be able to see the incoming phone calls
Answer:	Yes, I also have an Avaya Phone, and it works with the adapter (RJP-C) that came with the Kit. Works great.
Question:	What amplifier will work with this model need it to be louder
Answer:	Cisco SPA508G has 2.5mm headset port. This office headset has RJ9 jack. So it won't work. For headset to be compatible with SPA508G, please order the unit here. https://www.amazon.com/dp/B07R55XRHV?ref=myi_title_dp

Product features

Why AGPtEK?

FEATURES:

1. FSK/DTMF caller ID display, automatic checking;

2. 30 incoming, 5 outgoing number memories

3. 2 digits PABX code setup;

4. 32 digits pre-dial and edit;

5. Green Backlight in-use;

6. with LED indication

7. Flash and Mute function;

8. Headset speaker Turbine volume adjustment;

9. Ringer volume hi-low-off adjustable;

10. Flash time 100ms or 600ms choice;

11. The on / off noise reduction function;

12. Power save function

PRODUCT INSTRUCTION - HOW TO SET

GETTING STARTED:

1. Insert one end of the line cord to the line jack of the base and the other end to the wall outlet of exchange.

2. Connect the headset with dial pad.

3. Setting the dialing mode to correct mode according to the directions from your local telecom.

KEY FUNCTION:

[ OUT ] This key will display all the numbers called.

[ BACK ] At on-hook state, review the incoming or outgoing call list and find the number; press [BACK], the number will be dialed out automatically.

[ HOLD ] In off-hook state, press HOLD to enter into music-in-hold state (music is on), meantime you can hang up the handset.

[ MUTE ] Microphone will stop working by pressing this button at phone conversation, indicator light will turn red; press this key once more will recover the microphone.

[ FLASH ] It is used to get new dial tone or to activate customer-calling services available through your local phone company.

[ REDIAL ] Press REDIAL button, if you want to redial the last dialing number.

[ RIGNGER HI/LOW/OFF SWITCH ] Slide ringer switch to adjust desired ringer.

[ VOL ] Headset speaker Turbine volume adjustment.

[ FLASH ] Flash time switch, 100/600ms switchable.

• ➤Specs: Output Power: 12W(100-Watt Equivalent); Input Voltage: AC100-240V; Cold White (6000-6500K); Luminous: 1000lm; Lamp Style:E26; Working Temperature: indoor use and outdoor use if outside temperature is between 14°F(-10°C) and 95°F (35°C)
• ➤PIR Motion Sensor Included: High quality PIR infrared sensor is installed at the tip of bulb, so the motion sensor bulb will light up automatically while it detects motion within 8-10 FT in the dark, and automatically off after the motion ceased or disappeared about 45-60 secs. NOTE: Make sure the sensor is pointing down within proper distance and angle. To increase the bulb's sensitivity, you can adjust the Angle and Height of the bulb installation, make the sensor toward the direction people
• ➤Built-in Dusk to Dawn Sensor: This movement sensor light bulb will automatically switches ON at dusk when the movement sensor is activated and OFF at dawn.(Turn on below about 15Lux and off about above 40Lux) NOTE: Will not turn on in the daytime even when they detect motion. And if you use it for the first time during the day, it will turn on for 30 seconds and off when you turn on light switch.
• ➤Energy Saving and Usage Occasion: These movement sensor light only light up in the detective range at night or in dark environment, energy-saving, environment protecting and long life, can be use in stairs, hallway, bathroom, front door, storage room, garage, closet, balcony, gate and so on. The higher you hang the bulb, the larger detection range it achieves as the highest could be 10 feet vertically
• ➤Package Includes: 2 x Aukora Cold White Motion Sensor Light Bulbs, 1 x manual. Welcome to use Aukora's products, you will get the best after-sales service. Enjoy Your Colorful Life, Just Start From Aukora!

Product features

Enjoy Your Colorful Life, Just Start From Aukora!

The motion sensor bulb with auto switch are very convenient in home life, it will light up automatically (Keep on for 30-45 seconds) while the motion light bulb detect motion in the detective range in the dark, if you want to get up at midnight, you don't have to turn all lights on and wake others up. The bulbs could be widely used in basement, front door, garage, carport, pantry room, storage room, stairs, corridor, patio etc. It is like an intelligent servant, lighten your way home.

Motion sensor + Light sensor

When the motion sensing light bulb detects someone passing by in the dark, they will automatically light up(Keep on for 30-45 seconds), otherwise they will keep off. Smarter, more economical and convenient.

Built-in Dusk to Dawn Sensor

This movement sensor light bulb will automatically switches ON at dusk when the movement sensor is activated and OFF at dawn.(Turn on below about 15Lux and off about above 40Lux)

PIR Motion Sensor Included

High quality PIR infrared sensor is installed at the tip of bulb, outdoor motion sensor light bulbs can detect infrared heat waves emitted when the human body moves

Led A19 Light bulbs

Indoor motion sensor light bulbs provide 1000 Lumen of cool white light, equivalent to 100-watt incandescents with 90% less energy use, Last longer and energy saver

1. Keep off in the daytime

There is a dusk to dawn sensor inside the bulb, so it will not turn on in the daytime even if it detect motion.

2. Auto turn on in the dark when detect motion

High quality PIR infrared sensor is installed at the tip of bulb, so the motion sensor bulb will light up automatically while it detects motion within 8-10 FT in the dark

3. Auto turn off in 45 seconds

Auto turn off after the motion ceased or disappeared about 45 seconds, save your power effectively.

Specs

• Power: 12W(100-Watt Equivalent);
• Input Voltage: AC100-240V;
• Cold White (6000-6500K);
• Luminous: 1000lm;
• Lamp Style: E26/E27 base;
• Detection angle: 120°, height: 8 ft-10 ft
• Color rendering index: >80
• Package: 2 x Aukora Cool White Motion Sensor Light Bulbs, 1 x manual

NOTE 1

Because with a clear glass cover or fixture will educe the radius of motion detection, we don't recommend you install the bulb into a closed lamp fixture. If you have to do this to make it avoid get wet, please let the motion sensor exposed outside, so it can detect motion well

NOTE 2

The bulb should be installed downward and no higher than 10 feet, or the sensor will not work. To increase the bulb's sensitivity, you can adjust the Angle and Height of the bulb installation, make the sensor toward the direction people are coming.

NOTE 3

• If you use it for the first time during the day, it will turn on for 30 seconds and then keep off
• Please keep a distance: Don’t install 2 led light bulbs into 1 fixture or too close(less than 10ft), the bulbs function will be affected by each other.

Wide usage occasion-outdoor

Porch lights and garage lights

Wide usage occasion-indoor

Corridor lights

Wide usage occasion-home

Stair lights

Wide usage occasion-home

Closets lights

Product description

EASY INSTALLATION - simply plug in a lamp or other device to add safety and security to any space

From the Manufacturer

Due to continuing product development, the product you receive may look slightly different than the one displayed.

• MOTION SENSING LIGHT CONTROL - automatically turns on when you enter a room; never fumble for a light switch in the dark again
• WIDE RANGE - detects motion in a 100-degree radius and within 25 feet with a selectable 1, 2, 5, 10, or 20 minute auto-off
• MODERN STYLE - contemporary white finish and sleek design makes this a perfect accent that works with any decor
• VERSATILE - works with LED, incandescent, and CFL bulbs
• EASY INSTALLATION - simply plug in a lamp or other device to add safety and security to any space

User questions & answers

Question:	I received new version which turns on and off 5 times when I plug it in. Is this normal
Answer:	It’s possible it’s in test mode. Normally all motion activated devices will run a test phase upon initial use. There should be some toggle switches on the back to adjust the duration o time to remain on once activated by motion.
Question:	Do you plug this into the wall or do you have to wire it inside the outlet
Answer:	Just plug it into the outlet. No special wiring required.
Question:	after detecting motion what is the maximum operation time? I would like to set it to one hour. I see from one of the answers that it can be set to
Answer:	On the back it has a dial you can set for 1-2-5-10-or 20 minutes. These are the only options it gives you. Great product for the price.
Question:	Does it turn on during day light and does it have an option to use it when dark or for 24 hours whenever motion is detected
Answer:	Mine is in the kitchen and it will turn on, even if the main kitchen and dining room lights are already on. It doesn't seem to be as sensitive to moving bodies when the lights are already on. It's range is reduced. In the dark of night, I believe the sensitivity of sensor increases. Because someone walking into the living room 20 feet from the device, will trigger it on. In the day time, that doesn't happen. You have to be in the kitchen to trigger it. If you have pets walking around at night, they will most likely trigger it.

• 【Wireless, Easy and Fast Installation】: This monitor system is fully-expandable, with plug-and-play sensors that can be set up within minutes. The sensors can be mounted to walls, fence posts, trees, or any other surface, which is great for homes, offices, garages, yard, and shopping malls.
• 【3 Alert Options & 38 Chimes to Choose From】: You can select 1 of 3 ways of being alerted (Sound/LED Flash/Sound and LED Flash) and 3 volume levels from 25-80dB. You can also select from 38 Ringtones with Bright LED Light.
• 【Wireless Plug-in Receiver】: The portable wireless plug-in receiver plugs into any standard outlet. The sensor uses 3 AAA batteries (Not Included). Infrared sensor detects motion and sends a signal to the receiver. Detection time delay in between motion sensor alerts is configurable from 15 seconds to 30 seconds, just place the sensor at the entrance to your driveway and the receiver inside your home.
• 【Support Long Distance Connection】: Working range up to 328 feet (100 meters) between receiver and transmitter allowing you to place it a good distance. It can be alerted to visitors, notice door opening, scare off unwanted intruders, or even know when your children have accessed restricted areas.
• 【Applicable places】: Ideal for front doors, hallway, window frames, driveways, walking paths, and anywhere in your home you want to be alerted to motion. Also great to alert business owners that are working in the back, or out of sight, to customers entering their store.Please note that this not waterproof. Keep it away from rains or cover adequately.

User questions & answers

Question:	Could I use this for my back door by putting the sensor close to the floor so that at night it will chime if my dogs need to go outside
Answer:	You can place the sensor anywhere. We have it mounted to a heavy duty magnet so we can move it wherever we want.
Question:	how far will it detect motion
Answer:	Not sure. I placed it about 40' from the receiver. It only works maybe 1 out of 20 times. I do not recommend his product. It garbage.
Question:	Why when motion is detected does the receiver keeps chiming until i turn it off. i assume it should alert me and then shut off on its own? i.e.; if i wasn’t home and it detected motion it would keep going off indefinitely until i return to shut it off
Answer:	It goes off only once with motion and resets unless it detects motion again in 15 -30 seconds.
Question:	It wasys the detector range is 23ft but what is the width/angle of the beam
Answer:	Mine went off constantly no matter what I did. I made sure the wind was not effecting it. I would not buy again

Product description

Cooper Industries MS180 Adjustable Motion SensorCooper Industries MS180 Adjustable Motion Sensor Features:Durable high-impact non-metallic sensor head is weather resistant and provides years of trouble-free serviceEasily installs to one or more existing lights30 motion detection zones, the most of any brandTurns lights on automatically when motion is detected; detects motion at 180 Degree and up to 50 'Adapts to most wall and eave mount applicationsConvenient tool-free sensor head adjustmentAdjustable time and sensitivity settingsPower outage protection, saves energy by automatically resetting at dawn if lights are triggered by power interruption4 or 12 minute time delayApproximate coverage area of 7,600 square feet

From the Manufacturer

180 Degree Replacement Motion Security Floodlight Sensor.

• 180 degree detection zone up to 70 ft.
• Integral photo cell prevents lights from turning ON with motion during daylight hours (auto modes)
• Motion sensor turns lights ON automatically when motion is detected and OFF after a preselected time delay (4 or 12 minutes)
• Turns lights on automatically when motion is detected; detects motion at 180-degrees and up to 70 feet
• Adapts to most wall and eave mount applications

User questions & answers

Question:	The photo doesn't show any wires. Will there be wires
Answer:	JL,Yes....though the photo doesn't show it, there are three wires included in this unit. One goes to the "hot" wire of the circuit, one goes to the neutral of the circuit, and one goes to the load or light you wish to activate. Pretty much any of these replacement sensors are configured this way, although, if you read my review, I do not recommend this one, because of a variety of issues. Rest assured though, for about 3 or 4 dollars more, you can obtain a Heath/Zenith unit, which will work much better.
Question:	Does it come in white? Mycondo requires matching colors
Answer:	Yes it does come in white, but I don't have the white version. You can get it through another vendor I think. Thanks!
Question:	Does it work with regular led lights or only with dimmable leds
Answer:	This sensor works similar to a simple on and off switch. If it is dark and motion is detected it turns on. After a set period of time it shuts off. The load is irrelevant as long as it does not exceed 300 watts. So yes, this will work with both dimmable and nondimmable LED bulbs however, you will not be able to dim the dimmable bulbs.
Question:	has temperature compensation
Answer:	It may have temp compensation but locating it over an opening that is venting a pool area is beyond what the design is set up for. Ron
Question:	Does this come as pictured with the mounting stub or is it just the sensor? Thanks
Answer:	It comes with the mounting stub as pictured. The mounting stub is the standard size for attaching to an electrical box (there are any number of options as to what size and style). I purchased this unit about a year ago and it has functioned flawlessly.
Question:	Can I use two of these in paralled to work one light? I want to mount them on the corners of a garage and turn on one central light
Answer:	My guess is you will burn them out. i tried this once with a water circulation pump (no light in the circuit) connected to a relay. A friend of mine had 3 of these in 3 different bathrooms in his house. the thought was as soon as someone walked into a bathroom, this device would activate a pump which would circulate hot water from the water tank to the fixtures (and hence the cold water in the line back to the tank for heating). We took precautions. first we made sure the power going to the 'hot' and neutral side of the sensors were from the same breaker (otherwise you could accidentally send 240 volts to the load if the sensors were on different sides of the line coming into your breaker panel). Second, we used a relay (mentioned earlier) as 'the load' because the draw (in amps) of the circulation pump was more than the sensor would allow as a pass though (you have to pay attention to the current these things will allow... watts, amps, miliamps - all need to know stuff! - we could have hooked it up directly, but it would have burned them out in short order, not to mention create a fire hazard). Finally, we ran all three of the load wires back to one junction box, tied them together with a wire nut (to complete the parallel connection you are talking about), and connected the load to the trigger side of the relay. we walked in each room and sure enough, the motion sensor engaged the relay, and the motor kicked on and the water circulated as designed. we thought we were home free. after about 2 months, we noticed one of the sensors was no longer activating the relay (and the pump did not run). we could eliminate the motor as it was completely separated from the electrical path. we discovered one of the motion sensors had burned out. replaced it, and all was well, and then a month later, a motion sensor from ANOTHER bathroom burned out. the relay hardly drew any power, so it couldn't be that. then we separated all of them and had three separate relays to engage the pump - never had another issue with burn-out. so what happened? we think if a person 'tripped' the motion sensor, it sent 110 volts to the load side of the other sensors (which were not activated by motion), and that 'back flow' of power messed up the electronics inside the sensors not in use. only explanation that made sense. so long story short, you could connect them in parallel, but i think they would burn out because of a 'back flow' between the devices. when we separated them with individual relays - no problems. e-circulation pump would have drawn more amps than the sensor allows to pass through we ranf the 'load' side of
Question:	Can you disable the dusk to dawn setting
Answer:	yes
Question:	does it come on during the day when detecting motion or just after dark
Answer:	If your application requires it to work during the day just put electrical tape over the photo sensor and it works 24/7. I used sensor to activate a fountain pump 24/7

Product features

Heath Zenith 180 Degree Motion Sensor Replacement, Bronze

The 180° Universal Replacement Sensor has a bronze weather resistant housing. It has an adjustable range up to 70 ft. with a 180° range of motion detection. It has a selectable light timer that can be set for 1, 5 or 10-minutes. Has a daytime shut off, sensitivity adjustment and automatic power outage reset.

EATON Lighting MS180 180 Degree Replacement Motion Security Floodlight Sensor

180° Motion sensor. Motion sensor turns lights ON automatically when motion is detected and OFF after a pre-selected time delay (4 or 12 minutes). Integral photo cell design prevents lights from turning ON with motion during daylight hours (auto modes). Power outage protection: saves energy by automatically resetting at dawn if lights are triggered by power interruption.

• Motion sensor detects motion 180° up to 70 ft.
• Maximum load of 300 Watts

• [Modern Technology for Home Security] This RFID Proximity door access control system kit is one of the modern electronic access control systems
• [Safely and Reliable] The state-of-the-art CPU and integrated circuit techniques are applied to keep all the data from loss due to power failure.
• [Easy To Access] AGPtEK door security system is powerful and can open the door using proximity cards, passwords, or the hybrid.
• [More Convenient] The rfid lock kit access controller can provide users with more convenience by connecting to terminals, including the button for opening the door, doorbell, and electric lock that is normally open or closed.
• [Wide Application] The door lock installation kit offers a method for controlling access safely and automatically, qualifying it as ideal equipment for businesses, offices, factories, and communities. Get the full set of door security system to update your home security!

User questions & answers

Question:	Will this work for an industrial garage door
Answer:	I don't know, but I DO NOT RECCOMEND this product, it left me stuck locked out of my garage due to a internal failure, and received NO support from the company and eventually had to cut my way into my garage
Question:	Can i program rfid cards with this unit? thanks
Answer:	I honestly don't know. Directions do say that it's "technical parameter" work temperature is: "0 degrees C to -70 degrees C" and work humidity is: less than or equal to 80%. It seems to be meant for an indoor door. However, it works GREAT and if it's out of direct weather, maybe.
Question:	What is the rfid range
Answer:	The fob has to be directly against the keypad or else it will not work. I do not recommend this lock. It worked less than a year before I had to get a new one last week. What a piece of garbage this lock is.
Question:	How to set the unlocking time? I'm pretty sure the manual is wrong. It says #>admin code>3>Time>#, but to change unlocking passcode is also use #>adm
Answer:	Hello. You can buy extra key fobs from this link: https://www.amazon.com/dp/B07HHT1BST

Product features

DOOR ACCESS SYSTEM PROVIDE USERS WITH MORE CONVENIENCE ♦--------------------------

Are You Looing For a Method for Controlling Access Safely and Automatically? 



AGPtek Full Set RFID Door Access Control System Kit will help you!



This RFID Proximity access controller using proximity system is one of the modern access control systems, which is designed for your door security. The state-of-the-art CPU and integrated circuit techniques are applied to keep all the data from loss due to power failure. AGPtEK door access control system kit is powerful and can open the door using proximity cards, passwords, or the hybrid.The access controller can provide users with more convenience by connecting to terminals, including the button for opening the door, doorbell, and electric lock that is normally open or closed. 



This door entry systems is qualified as an ideal equipment for businesses, offices, factories, and communities. Get this home security systems for your security door!





 

UPDATE THE SAFETY OF YOUR HOME AND OFFICE ♦-----------------------------------

IDEAL FOR SECURITY DOORS, BUILDING ENTRANCE AND EXITS ♦-------------------------------

WIDELY USED IN FAMILY HOUSES, VILLAS, OFFICES, HOTELS AND SO ON ♦-----------------------

Power Supply Specifications:



1.Small and exquisite, easy installation.

2.Advantages: Voltage range input regularly from 100V-240V, compatible with world voltage, light weight, convenient transportation, small disturbance, output voltage fluctuation is only ±1% from no-load to full load, lock temperature rising reduces greatly (compared with power frequency supply).

3.AC input: Standard AC100V-240V 50-60HZ 36W

4.DC output: Stabilizator DC12V/ 3 A

5.It controls electric lock directly. It can set time lapse control circuit and unlocking time can be in 0-15 seconds(it is arbitrarily adjustable).

6.Automatic protection function: It will protect automatical and no voltage output when short circuit happening in the circumferential circuit.

7.Outside iron shell dimension:120mm*95 mm*38mm

8.Set NC / NO outputs, can control various types of electric locks

9.Note: Opening time must set to 0 second when connecting with electric controlled lock. Otherwise electric bolt lock would be Burned Down.