14 best sofa with speakers

Product description

The SANUS WSSA, Adjustable Height Speaker Stand, is the perfect solution to place your SONOS ONE, ONE SL, Play: 1, or Play:3 at the ideal listening height. With tool free height adjustability from 30" to 42", it's easy to adjust your speaker to achieve optimal performance. With 15 minute install, you can have your speaker assembled and listening in no time at all. And don't worry about those pesky cables. With our press fit cable management, simply run the cables down the back of the stand for complete concealment.

• Designed for SONOS ONE, Play:1, and Play:3
• Tool free, fully adjustable height allows speaker to sit at your ideal listening height for optimal performance
• Anodized aluminum give your speaker stand a sleek look matching the beautiful aesthetics of your SONOS speaker
• Press fit cable management allows for sleek concealment of cables
• Easy 15 minute install & all floor compatibility - carpet spikes and rubber pads

User questions & answers

Question:	With the stand placed on the rear wall, how much space between wall and stand
Answer:	In answer to my understanding of the question, I placed the base of the stand against the quarter round trim at the floor and then measured the distance between the lower part of the stand upright and the wall and that distance was 3.5 inches. If the measurement is taken higher on the stand the distance will be slightly more.
Question:	Does this work with samsung hw-n950 wireless rear speakers
Answer:	Hello, These were designed for the SONOS line of product. If you are looking for something for your Samsung, check out our HTBS speakers or give us a ring at 800-359-5520. Kathryn @SANUS
Question:	Customers complain about how the sonos 1 just rests. i see a bracket with a hole that could secure the speaker. true? do you provide the screw
Answer:	Hello, The Sonos One will rest on top but the Sonos Play 1 and Play 3 will have a speaker bracket to attach. Either way, you can rest assured this will keep your speakers safe because it is UL listed and has been tested to withstand up to 10 degrees of tilt! Kathryn @SANUS
Question:	Does it allow both the cord and ethernet cable be threaded through the stand
Answer:	Hello, Yes this was designed to thread all cords through the stand. Please give us a call at 800-359-5520 if you have any other questions! Kathryn @SANUS

• Selected Material: High resilience sponge is wrapped in high-quality durable PU leather. High-density thicker sponge make you sit more comfortably, and the waterproof leather not only skin-friendly, but also easy to clean
• Multi-Function Use: The adjustable back and footrest can be adjusted from 90 to 180 degrees , suit for gaming, watching TV, napping and so on
• Ergonomic Design: Coming with a headrest and a back support. Provide lasting support, built to perfection to allow you to continue gaming for hours on end
• Sturdy Frame System: Sturdy frame made by stainless steel and hardwood, max capacity:300 LBS. With four protective foot cover, effectively prevent your floor from being scratched
• 120 Days Worry-Free: We will do our best to help you to solve the problems you have. Don’t hesitate to contact us any time you need. Free replacement or parts for any quality problem within 120 Days. Just feel free to contact our staff if you have any issues with this product

Product features

About VITESSE gaming products:

VITESSE gaming product always provide the most fashionable style and the most comfortable design for you.

If you are looking for the ultimate recliner chair that can be used for everything from gaming to relaxation, then

look no further. This recliner chair is all you could ever want.

Not just a gaming recliner:

The 90 - 180 degree adjustable backrest allows it to adapt to any situation.

It could also be a home theater seating, come to build your own home theater!

Skin friendly PU leather

Waterproof PU leather not only is it skin-friendly, it's also easy to clean

High-density sponge

High-density thicker sponge make you sit more comfortably

Sturdy frame material

Sturdy frame made by stainless steel and hardwood, max capacity: 300 LBS

Professional design:

Ergonomic design let you forget about fatigue.

The latest E-sports style makes you feel better when playing games.

Specifications:

• Seating area dimension: 23.6”L × 19.3”W
• Backrest dimension: 18.7”L × 24.8”W
• Open dimensions: 64.4”L × 25.2”W × 28.5”H
• Closed dimensions: 31.9”L × 25.2”W × 40.0”H
• Seat height: 19.2” H
• Max capacity:300 LBS

Package includes:

• 1 x Gaming recliner chair
• 1 x Install instruction Paper

• 🎵 Universally Compatible - This speaker stands are designed for most satellite & bookshelf speakers up to 22lbs such as Klipsch, Sony, Edifier, Yamaha, Polk, Vizio, Samsung and other computer speakers, this speaker stands are easy to use and it can definitely meet your requirements.
• 🎵 Wire Management - The pole of this bookshelf speaker stands is hollow and built-in 1.18”×0.78” wire holes, then you can put the messy cables through the wire holes into this speaker stands and will not see it. The disappeared cables can make our home more cleaner and beautiful.
• 🎵 Attractive Design - We will provide the universal bracket and sponge for your speakers, it can reduce the shaking of the speakers and give you a better voice. And this surround sound speaker stands has stable tempered glass with non-slip feet, which can protect your floor from being scratched.
• 🎵 Suitable Height - The height of this speaker stands is 33.6 inches, when sitting on the sofa, the speakers can be put at your ear level, which can get the improved sound and enjoy the best voice environment. We can get happiness from this speaker stands when we use it.
• 🎵 Tool Free & Easy Assembly - You can install your speakers without using other tools when assembling this bookshelf speaker stands. At first, adjust the size of the speaker brackets ( 5.9 "-10" ) to put the speakers, then just need to tighten the screws. After that, we have done all the work.

User questions & answers

Question:	What does this stand offer in terms of sound absorbtion
Answer:	Not too much straight out of the box, you would have to add your own foam. That being said, i ran my speakers hard in these for a few days without adding foam and did not notice any downside
Question:	Is it possible to use the stand without the wings coming up on the speaker plate? For surrounds that are bipole and kind of wide
Answer:	Thanks for your question. Sorry, this speaker stands can not use without the wings. As for your issue, we also have another speaker stands that the top plate without wings, maybe you would like: https://www.amazon.com/dp/B08CXLJXTG If you have any other questions, please feel free to contact us: [email protected]
Question:	what is the minimum width for the top plate
Answer:	Thanks for your question. The minimum width of the top plate is 5.9". To better assist you, could you please kindly tell us the specific model of your speakers? Then we can confirm whether it is suitable for these universal speaker stands. If you have any other questions, please feel free to contact us: [email protected]
Question:	Will this stand hold my tsi 100 polk audio book shelf speakers
Answer:	Amazons web site shows the Polk Audio TSI 100 dimensions are 10.2 x 7 x 11 inches. The stands will fit well if those are the dimensions.

Product features

Perlegear Floor Speaker Stands

Universally Compatible

This speaker stands are designed for most satellite & bookshelf speakers up to 22lbs such as Klipsch, Sony, Edifier, Yamaha, Polk, Vizio, Samsung and other computer speakers.

Cable management

The pole of the speaker stands is hollow for wire management it can hide the annoying cables and offer a clean and organized look.

Suitable Height

The height of this speaker stands is 33.6 inch and it can put your speakers at ear level when sitting on the sofa, which can get the improved sound and enjoy the best voice environment.

• 【Ergonomic Design for Gamer】- The backrest of the JUMMICO gaming recliner was designed with an ergonomic curve. The headrest and lumbar pillow of the game recliner provides comfortable support for you. Comparing with normal racing gaming chair, gaming recliner chair is larger and softer, suitable for long time using.
• 【Adjustable Backrest & Footrest】- The backrest and footrest of the recliner can be freely adjusted between 90 ° and 160 ° . Different reclining range of the chair back is suitable for different relaxation methods. You can play games, watch TV and take a nap on the recliner with the comfortable tilt angle.
• 【High Quality Material】- The game recliner chair is composed of a high-strength steel frame, the maximum load is 280 pounds. The surface of the sofa is fully covered with Skin friendly PU leather, which is smooth, waterproof and easy to clean.
• 【Game style】- The racing style game recliner chair compared with other ordinary game chair has more seat space. This game recliner chair is very suitable for your game room, bedroom and home theater. It is an ideal choice for your entertainment and relaxation.
• 【Worry-Free Warranty】- JUMMICO has an excellent after-sale service team, Please feel free to contact us if you have any questions, We will do our best to help you to solve the problems you have. Hope to bring you the best shopping experience.

User questions & answers

Question:	Where can I get the keyboard tray featured in the pictures
Answer:	This is exactly what I'm planning to do, and it seems like it should work fine. That's a 6-ohm speaker, and the power ratings for the Sprout are listed at 50 W into 8 ohms, or 100 W into 4 ohms. Power for 6 ohms should be somewhere in between, but it's hard to tell exactly. Sensitivity is listed at 87 dB for the FS52. That should be nice and loud even at 50 W, but at 100W it would be even better! More info on sensitivity here: https://geoffthegreygeek.com/understanding-speaker-sensitivity/ The speaker could definitely handle a bigger amp, but this should serve it just fine.
Question:	Does this chair come with massager I’m seeing different reviews
Answer:	Yes the Sprout100 can certainly improve the sound quality even if you have powered speakers. The reason for this is by routing the signal from your computer into the Sprout100 you will be taking advantage of the fantastic DAC built into the Sprout100.
Question:	Do it come build? If not is it easy to build
Answer:	Line level only.
Question:	Can you recline just back part or once you lay back whole chair has to recline
Answer:	There actually is no low pass filter. The subwoofer output will send a full bandwidth signal and rely on your subwoofer for crossover tuning. And likewise the speaker terminals will always be sent a full range signal as well.

Product features

Product description

USB radio system is attached to convertible futon sofa bed couch that allows you to charge your phone and laptop while you enjoying on convertible sofa futon. Bed couch comes in 2 packages in order to lift easily. Futon bed sofa is easy to assemble and contains all the hardware so no need any extra tools to install convertible bed sofa futon. Convertible futon is an excellent option for living room, bed room and guest room. PILLOWS INCLUDED: Bed futon sofa couch comes with 2 pillows to complete the futon sofa's decorative elements. COUCH DIMENSIONS: 77(L) x 35(W) x 33(H); Couch Weight 80 lbs

• Featuring Bluetooth speakers, the futon folds back to expose a smooth bed
• COZY UP! Multi-function living room sofa easy converts from sitting to lounging couch and sleeping position. This gorgeous modern grey couch is tremendously cozy. The backrests are removable for snuggling up in front of the TV or fireplace.
• QUICK, EASY DELIVERY + ASSEMBLY: This cozy couch is super easy to set up. All you need is 7 minutes to easily attach the arms and back to the base. Key Product Features
• PILLOWS INCLUDED: Comes with 2 pillows to complete the futon sofa's decorative element; COUCH DIMENSIONS: 77(L) x 35(W) x 33(H); Couch Weight 90 lbs Key Product Features
• SERVICE: If you have any questions, please contact us, we will serve you in 24 hours Key Product Features

User questions & answers

Question:	How do i get the usb speaker system to work
Answer:	It comes in 2 pieces! Super easy to build!
Question:	How much weight does it support
Answer:	The legs go up when reclining if that’s what you mean. And it can even lay almost flat , but any reclining and the leg rest goes up.

Product description

Everything is designed for maximum comfort.

Homall Gaming recliners feature a backrest that can be tilted back, and a footrest that can be

extended by means of a lever on the side of the chair.Everything is designed for maximum comfort.



Features:

Smooth manual reclining function for optimal comfort (backrest reclines and footrest pops up)

Thick padded armrests and a side bag for your comfort and convenience

Sturdy and durable design suitable for intensive use

Finest leather which is very comfortable to sit on



Item Specifics:

Maximum capacity: 265 lbs

Seat Height: 17.7”

Seat Dimensions :19.7"(W) x 22.1"(D

Back Dimensions:20.9"(W) x 29.1"



Please Note:  

Our digital images are as accurate as possible, however, photo taking condition and different monitors may cause image color to vary slightly, and it is normal..

• Gaming recliner made with high-quality PU leather (comfortable skin friendly and easily cleaned) and high-density thicker sponge ( high resilience and high permeability)
• Adjustable footrest and back: This gaming recliner can be used as three kinds of shape form 90 to 180 degree, suit for gaming, working, watching movies and napping
• Gaming style design: Latest recliner designed for gaming. Compare with the racing gaming chair, gaming recliner is bigger and softer, it’s more suitable for long time gaming
• Maximum capacity: 265 lbs; Seat Height: 17.7”; Seat Dimensions:25.5"(W) x 29.1"(D); Back Dimensions:20.9"(W) x 29.1"(H); Open Dimensions: 27.6”(W) x 62.6”(D) x 27.9”(H); Closed Dimensions:25.5”(W) x 35.8”(D) x 40.5”(H)
• Foot protection: This single recliner is supported by four sturdy feet with non-marking pads which effectively protect the sofa and hard floor.

User questions & answers

Question:	How do you make it recline? Lever? Push with your weight
Answer:	Just push back with your weight and it will extend the leg rest, there's no lever with the chair.
Question:	Are you guys still shipping in this Covid-19 crisis
Answer:	yes
Question:	I am reading no massage for this chair? but there are pics showing all the massage functions. is there or isn't there massage functions
Answer:	Yes there is massage features, 6 setting 2 diff time settings and motions, you can set pulses 15 sec or 30 secs. Its ok for massage chair , mostly just feels like vibrations and not so massaging .
Question:	I'm 5'9 and heavy set guy, would this be too small for me
Answer:	Yes ,the chair is on the small side.

Product features

About Homall Direct

Homall Direct ensures to have the best products at the lowest prices by dealing directly with the manufacturers to sell products straight to you.

If you are looking for an attractive recliner to go in your living room, bedroom, gaming room or even your recreational area this is the one for you!

Modern recliner chair

Designed by a professional design team. This recliner keeps the same function with the base version and increase its aesthetic feeling and e-sports style.

Used as a gaming chair

Latest recliner designed for gaming. Compare with the racing gaming chair, gaming recliner is bigger and softer, it’s more suitable for long time gaming.

Modern Lumbar Support

Compare with the base version, this recliner added a built-in lumbar support which embroidered with a pattern of an eagle

Modern Headrest

Built-in headrest with the exclusive logo designed by our professional art designer, more beautiful than the base version

Extra Side Bag

This upgraded reclienr chair adds storage bags on both sides of the seat, more convenient than the base version

Product description

The futon is a classic hardwood frame with tray style arms. This unique and versatile full size futon sofa easily converts to a bed.  This multifunctional piece of furniture can find a home in just about any type of room. Mattress dimensions: 75L X 54W X 8H; Frame dimensions: 82L x 37D x 33H.

• 100% Polyester
• Made in the USA and Imported
• Solid hardwood construction
• Converts to standard full size bed
• No tools needed for easy assembly
• Sofa height seating
• Plantation grown hardwood

User questions & answers

Question:	how long does it take to receive if we buy from amazon prime
Answer:	I made my own
Question:	is this true white
Answer:	Yes. The massager is a pillow at the base of the back rest

Product features

Phoenix Futon Set with Storage Drawers

The Phoenix futon is a classic hardwood frame with tray style arms that can be extended or lowered for your comfort. This unique and versatile full-size futon sofa easily converts to a bed. Available in 6 beautiful finishes that will easily blend in with many decor styles. This multifunctional piece of furniture can find a home in just about any type of room.

Finest Quality Innerspring Futon Mattress

This innerspring futon mattress is of the finest quality. The upholstery grade fabric is tufted to the mattress both for durability and design. This mattress utilizes thirteen gauge bonnell springs. The springs flex with your body to offer support while you sit or sleep. The flexible layers of Certipur-US foam and plush layers of cotton add to the superior comfort. The conversion from sitting to sleeping position is made easy with this unique hinge system. The hinge not only provides proper sitting and sleep positioning, but also keeps the mattress in place while sitting. This mattress is made in the USA.

3 Position Sturdy Frame

Solid, plantation grown hardwood construction. Barrel Nut and Bolt Hardware for easy assembly. Frame can be positioned in sit, lounge and sleep positions.

Tray Style Arms

The tray style arms can be extended or lowered. This beautiful set will blend with any decor.

8" Mattress

Superior quality 8" mattress in your choice of a fabric or bonded leather mattress cover that is tufted directly on to the mattress.

Full-size Bed

Converts to a standard full-size bed.

Product description

This optional upgrade kit includes a receiver unit that links wirelessly to compatible LG sound bars, then connects to a pair of wall-mountable speakers (included) that can be placed behind the listener for true home theater surround audio. 2.0 channels (140 total watts - two speakers at 70W). Compatible LG sound bars include: SJK0Y, SK9Y, SK8Y, SK6Y, and SK5Y

• Surround sound expansion: the Spk8 add-on rear channel speakers (sound bar sold separately) can turn a living room into a home Theater
• Wireless connection: this Surround sound Kit is designed to Link wirelessly to the sound system for the ultimate in performance and simplicity
• Wall mountable: for even greater design flexibility, these speakers can also be unobtrusively wall-mounted, especially handy when there’s no Table or shelf nearby

User questions & answers

Question:	What screw size is required to mount the speakers
Answer:	Nik is correct, I went to my local hardware store with this speaker and tested until I found a match. The size is metric M4 and the thread holes (one backside midway up, one bottom in the middle) are about 1/2” deep, so take screw length into account when considering how thick your mounting plate and washer are. I am using a pretty thin metal mounting plate, a fender washer (which has a small hole inside a larger washer diameter) so I chose an M4 x 10, .70mm thread pitch went in nicely.
Question:	How long are the wires that come with the speakers? If not long enough, can I add length using standard speaker wire
Answer:	If the speaker wires for the LG SPK8-S 2.0 Channel Sound Bar Wireless Rear Speaker Kit are not long enough for where you would like to position the speakers, you can splice the wires. The speaker wire is either 16 gauge or 18 gauge wire that is available in spools of varying length...^IFV
Question:	What inputs does this support? Does it only work with paired LG sound bars
Answer:	It's a wireless receiver that only works with LG SL10Y, SL9Y, SL8Y, SL7Y, SL6Y, SL5Y, SL4Y, and SKM5Y soundbars. "G" variants of these with Google search should work as well. The speakers are connected to the receiver via standard 2-wire conductor cable.
Question:	What screw size is needed to mount the speakers
Answer:	Nik is correct, I went to my local hardware store with this speaker and tested until I found a match. The size is metric M4 and the thread holes (one backside midway up, one bottom in the middle) are about 1/2” deep, so take screw length into account when considering how thick your mounting plate and washer are. I am using a pretty thin metal mounting plate, a fender washer (which has a small hole inside a larger washer diameter) so I chose an M4 x 10, .70mm thread pitch went in nicely.

Product features

Surround Sound Expansion

LG sound bars can fill a room with thrilling, immersive virtual surround audio. But select models can also be upgraded to true surround sound via these add-on rear channel speakers (sound bar sold separately). Pair the LG Rear Speaker Kit to an SL10Y, SL9Y, SL8Y, SL7Y, SL6Y, SL5Y, SL4Y, SKM5Y sound bar for true home theater surround sound.

Wireless Connection

This easy to set up rear-channel speaker kit is designed to link wirelessly to the sound bar for enhanced surround sound performance.

Wall Mountable

For even greater design flexibility, these speakers can also be unobtrusively wall-mounted, especially handy when there’s no table or shelf nearby.

Note: Wall Mount Sold Separately.

Product description

Definitive Technology DT Series DT6.5LCR in wall speaker - each, installation and setup is a snap, The disappearing grille really disappears

• Installation and setup is a snap
• Premium materials - every choice optimized for its intended use
• The disappearing grille really disappears

User questions & answers

Question:	Will this fit between 2 studs, 16" on center, without modifying the studs
Answer:	It was here by the end of the week, it was a couple days
Question:	please inform me about the color of the grid. I need white
Answer:	It’s not a true white, it’s antique white. Should of been stated in the description.
Question:	what color is the speaker cover
Answer:	Please plug it in to charger point. There is a cable under futon
Question:	Are the speaker covers paintable
Answer:	850 pound

Product description

Aria In-Wall Speakers 6.5-inch Polypropylene 2-Way (pair)

• Long-throw 6.5in Poly+Mica woofer and 0.5in PEI tweeter make these mounted speakers sound full and articulate.
• Smooth installation thanks to paintable grills and baffles, precision cut-out templates, and easy flip-out inDog Earsin.
• Enjoy Aria speakers as main home theater speakers and whole home house systems or add as surrounds and immersive sound sources.
• No logo grill adds to the minimal look and increases the inWife Acceptance Factorin.
• Buy confidently with a 30-day money-back guarantee and our 1-year warranty.

User questions & answers

Question:	Does this subwoofer work outdoors? Weatherproof? It would not be directly in the weather and possible would not get wet but just wanting to be sure
Answer:	Yes
Question:	Would these work for left and right front speakers that are mounted horizontally
Answer:	The grid color is white.
Question:	what is the purpose of the thin black adhesive string supplied with the speaker? That is not described in the manual. Thanks
Answer:	Black
Question:	Can I just wire this to my receiver? Or does it need something else
Answer:	Yes, they are paintable .

Product description

The SANUS Euro Series EFSat is an adjustable-height speaker stand for satellite speakers up to 10 lbs. It includes a high-mass, cast-iron base with rubber feet and adjustable carpet spikes. Its sturdy steel pillar can be adjusted from 26 to 42 inches and features a concealed wire path to organize cables. It includes 2.5 by 3.25-inch and 5 by 5-inch top plates, as well as L-shaped and Klipsch RS and Quintet brackets to accommodate most satellite speakers. This product is sold as a pair.

Give your satellite speakers a sleek, contemporary foundation while also improving their audio performance with these Sanus adjustable speaker stands. Boasting a European-style profile and a durable powder-coated black finish, the stands suspend your home theater speakers at the ideal listening height--from 28 to 42 inches depending on the height of your chairs or couch--letting you sit back and enjoy the full splendor of your surround sound system. Each stand also features a cast-iron base engineered for solid support, along with your choice of premium adjustable floor spikes or custom screw-in rubber feet to provide stability and minimum resonance on any floor surface. Meanwhile, the steel top plate includes custom speaker isolation pads to further enhance the sound quality. A further bonus stems from the stands' concealed wire path, which hides your speaker cable from view to improve the room's overall aesthetics.

The stands fit most satellite speakers weighing 10 pounds or less. Some assembly is required, though it takes just a few minutes using a Phillips screwdriver. The stands are also backed by a five-year warranty.

What's in the Box

Two high-mass base plates, two adjustable-height pillars, two medium top plates, two small top plates, two L-shaped speaker brackets, two Klipsch Quintent brackets, two Klipsch RS brackets, two threaded stud mounts, six pad feet and six carpet spikes, eight speaker isolation pads, assembly hardware, user's manual.

• Sturdy cast-iron base with choice of adjustable floor spikes or screw-in rubber feet
• Height adjusts from 28 to 42 inches to suspend speakers at ideal listening level
• Conceal unsightly cables
• It includes 2.5 by 3.25-inch and 5 by 5-inch top plates
• It includes a high-mass, cast-iron base with rubber feet and adjustable carpet spikes

User questions & answers

Question:	I have klipsch quintet 5.0 speakers. the ef-satb manual says to put screws in where the speaker wires are spring-loaded. is this correct? how
Answer:	The speaker is not weather proof, but customers have put them in patio areas before. It really depends how well it is protected.
Question:	Will these stands work with the harmon kardon hkts 30 satellite speakers
Answer:	Yes they are very clear to
Question:	I have Klipsch Icon 4" Bookshelf speakers. They are kind of large but they are under the max weight (8lbs) Has anyone used these with these stands
Answer:	Use them as a dampener between the grate and the speaker. You may have some rattle and chatter with your Audio and they can stop it
Question:	Would these work for Energy Take 5 Classic speakers
Answer:	Yup. Just connect speaker wire to speaker and mount in wall. Love mine would definetely recommend.

Product description

This Theater Solutions by Goldwood powered floor subwoofer is newly designed for consumers who demand extra powerful bass for their home theater experience. High quality, lush bass and a full bodied sound at an affordable price. This speaker is perfect playing movies or mega bass rap music. Made with only the highest quality, moisture resistant materials to deliver unsurpassed sound in any listening environment. Sophisticated design and measurement equipment, including computer assisted design software were used to design this powered subwoofer to achieve an optimized balance and interface between components to give better quality performance and longer life. This slim versatile sub comes with stands to set up in any area, a mounting bracket to attach to a wall or the slim 4 3/4" height can slide under most furniture. The specially built in cabinet amplifier has high level left/right spring terminal inputs. The 24dB per octave crossover is continuously variable from 50-150Hz. This powered sub also has a built-in auto shut off. If two minutes goes by and sub does not receive a signal it switches to stand-by mode to conserve power. Volume and crossover frequency dials round out the special features on this super powerful subwoofer. The 8 inch long throw bass woofer has a frequency response of 35-150 Hz +/- 2dB. The port design smooth's air flowing in and out of the cabinet, reducing turbulence and port noise. The ports also increase linearity, lowers distortion, reduces 5th order harmonic distortion and provides an increased output as high as 2-3dB. A black wood finish, cabinet feet, 115 AC cord, included RCA cables, RCA "Y" adapter, stand mounts and hanging mount with mounting screws round out this subwoofers fantastic details.

• Theater Solutions SUB8S slim 4.75" height design fits under most furniture, 250 watts peak power, frequency response is 35Hz-150Hz, 24dB per octave crossover, 8ohm impedance
• Built in digital drive high efficiency amplifier, 8" high efficiency low frequency down firing transducer, L/R RCA inputs, high level L/R input and output spring terminals
• Variable 35Hz to 150Hz control knob, gain control knob, 0 or 180 degree phase switch, built-in auto shut off, bottom slotted bass port, black ash finish
• Variable 35Hz to 150Hz control knob, gain control knob, 0 or 180 degree phase switch, built-in auto shut off, bottom slotted bass port, black ash finish.This Powered Subwoofer is NOT LFE Compatible
• Full instructions, 9” 10” dual RCA cable, and "Y" adapter included, use for in wall or in ceiling home entertainment, home theater systems, surround sound systems and multiple room systems

User questions & answers

Question:	Does it come with an amp
Answer:	Yest the amp itself is powered but I unnecessarily power it first with a little Sound appeal 50Wx2 amp I ordered with it also from Amazon that I had previously and it does the job very well, With a couple of small speakers it beats any soundbar or docking speaker. You do not need one. I just have it to plug my phone in.
Question:	i will be using this sub for 2 channel stereo. Do i run an additional set of speaker wire from my speakers to the high level R&L inputs of the sub
Answer:	I believe you run the speaker wire from your stere to the high level R&L inputs and the high level outputs speaker wire to the speakers you're using. But I think if you use the RCA red and white plug from your stereo to the subwoofer, u don't need to use the speaker wire. It's one or the other. I haven't been using my subwoofer do to some construction work, but I believe that's how I have it connected. Hope that helps.
Question:	I want to use this for my rear center speaker. I only have the two speaker wires coming from the receiver. How or can I use this for this purpose
Answer:	You'll get some really weird effects from a subwoofer at the rear. Generally, you want a subwoofer at the front of the room, best if near the center but not imperative. Bass is somewhat non-directional, but coming from behind will give some very strange effects. You want your subwoofer working acoustically in conjunction with your front R, L and Center speakers.
Question:	Can a 42" flat screen tv be placed on top of this cabinet? Or better yet, can it be placed under the tv
Answer:	I would strongly suggest keeping the box and tv separate. This sun is not 'shielded'. A unshielded speaker will cause electromagnetic interference and possibly damage the tv.

Product features

Theater Solutions SUB8S 250 Watt Surround Sound HD Home Theater Slim Powered Active Subwoofer

• Slim 4.75" Height Design Fits Under Most Furniture
• 250 Watts Peak Power
• Frequency Response: 35Hz-150Hz
• 24dB per Octave Crossover
• Impedance: 8 Ohm
• Built In Digital Drive High Efficiency Amplifier

• 【Custom-Designed Sonos Stands】 Perlegear speaker stands only design for Sonos speakers up to 22lbs: Sonos one, Sonos One SL, Play:1, Play:3 and Play:5. Play:3 can be mounted either horizontally or vertically. Floor speaker stands are seamless fit above speakers
• 【Give You Purer Sound】Putting your speakers on speaker stands gives you more freedom to put them where they'll sound their best. When you listen to music, Sonos speaker stands will reduce reflected sounds from walls and other nearby surfaces to let you enjoy brilliant sound
• 【Durable & Sleek Appearance】PGSS2-1 speaker stands are made of steel material and tempered-glass base increased structural stability to eliminate wobbling and tipping over to ensure Sonos speakers’ security. The black look can well suit for home furniture
• 【Cable Management & Move anywhere】Speaker mount Built in 1.18”×0.78”wire holes to hide the compatible Sonos speaker's power cord down the back of the stand for concealment and give the stands a clean look. Feature with rubber feet to accommodate different flooring, so you can use speaker stands with Sonos speakers on hardwood, laminate, or tile flooring where you want
• 【Fast & Easy Assembly】: Sonos speaker stands come with necessary mounting hardware and clear manual in the package. All you'll need is a phillips-head screwdriver to assemble the speaker stands and to mount your compatible Sonos speaker to the stand. Perlegear estimates an assembly time of approximately 15 minutes

User questions & answers

Question:	What is the max weight of this sonos play 1 stand can hold
Answer:	Hi The speaker wires run through the stand and then plug into the speaker. Take screw and place through slit and then round stand off and into speaker.
Question:	Does this stand allow for Sonos Play 5 Vertically
Answer:	I don't have the HK speakers, but these stands come with a variety of mounts. I have had these stands for 4 years now, and I am pleased. You should be able to mount your speakers.
Question:	How can I mount my speaker on this sonos one speaker stand
Answer:	Not only could the height-adjusting screw (plastic-made) have trouble supporting that weight, but the triangular bases wouldn't ensure great stability with larger speakers. In light of my experience with those stands, I wouldn't try it.
Question:	Do these stands come in white to match the Sonos One SL speakers
Answer:	Not 100% positive but I think they would. The stands come with several different types of brackets and mounting screws to attach to different speaker configs. If you have just plain speaker wire you will be able to thread it up through the shaft and out to speaker. If they come with their own custom speaker wires and connectors attached (like my Vizio speakers) you will not be able to thread them up through. Just open the packaging carefully in case you need to return them.

• 【2.1 Stereo & Digital Filtering】 2* 2” neodymium drivers, 1*3” subwoofer, and a 3.5” passive radiator, to deliver impressive mids, crisp treble and powerful bass. Digital signal processor NTP for accuracy of sound reproduction, ensures songs have clear vocals and enhanced bass for uncompromising performance.
• 【Wireless Stereo Pairing】 It’s detail with clear and ear-pleasing loudness you can hear, and breathtaking bass you can feel after pairing 2 Bluetooth speakers. You can enjoy your home immersive theatre sound for music, news,audiobook, dialogue, etc.
• 【Dedicated Adapter】Asimom Jewel Pro has no battery inside, and it provides a dedicated adapter for high-power home speakers. The Bluetooth speaker also support TF card and AUX-IN.
• 【Elegant Design】 The design of inspiration from nature. Rhombus silhouette and premium materials deliver an elegant look, will easily fit into any desktop, bookshelf, and cabinets.
• 【TV/Projector Connection】NOTE: The TV/Projector should have 3.5mm AUX output or Bluetooth to connect with the speaker, if it doesn't have the AUX or Bluetooth, it will unable to connect with the speaker. Before purchasing, PLEASE help to confirm that your TV or digital products do have 3.5mm AUX output or Bluetooth. Also please make sure your TV or digital products support analogue audio output.

User questions & answers

Question:	I would like to place this on a high shelf where i wont be able to easily reach it. is it always on, or how do i power it up each time i use it
Answer:	Thanks for your question. The wireless speaker stands can hold the speakers weight up to 22lbs. If you have any other questions, please feel free to contact us: [email protected]
Question:	Can you link multiple of these speakers together to use them in separate parts of an open-concept kitchen/dining/bar/living room space
Answer:	Thanks for your question. These floor speaker stands you looked at can fit your Sonos play 5. But I'm sorry that you can not put it vertically. If you have any other questions, please feel free to contact us: [email protected]
Question:	Could two of these be paired with a tv and used for additional sound? If so, can the volume be controlled via the tv remote
Answer:	Thanks for your question. We have different type of the top plate specially designed for Sonos One, One SL, Play:1 Play:3 Play:5, So you can choose the correct one to install it on the speaker stands, and then easily fix your speakers. If you have any other questions, please feel free to contact us: [email protected]
Question:	How do you charge this speaker
Answer:	Thanks for your question. Sorry, currently we only have the black color stand in stock. If you have any other questions, please feel free to contact us: [email protected]