13 best magnet mount cb antennas
Magnet mount CB antennas are popular accessories for Citizens Band (CB) two-way radios used in vehicles. These antennas are designed to be mounted temporarily on the roof or trunk of a vehicle using a strong magnet base. Here are some key points about magnet mount CB antennas:
Mounting: Magnet mount CB antennas typically feature a strong magnet base that adheres to the metal surface of a vehicle. This temporary mounting option makes them easy to install and remove, which is ideal for situations where you don't want a permanent antenna installation.
Antenna Length: The length of the antenna is crucial for its performance. Longer antennas tend to have better range and reception compared to shorter ones. Common lengths for CB antennas range from 2 to 5 feet.
Coaxial Cable: Magnet mount CB antennas come with a coaxial cable that connects the antenna to the CB radio inside the vehicle. The cable length can vary, but it's essential to ensure it's long enough to reach your CB radio comfortably.
Tuning: To optimize the performance of a magnet mount CB antenna, it's essential to properly tune it. This involves adjusting the length of the antenna to match the frequency you'll be using on your CB radio. Proper tuning helps maximize signal transmission and reception.
Ground Plane: The metal roof or trunk of your vehicle serves as a ground plane for the magnet mount antenna. A good ground plane helps improve the antenna's performance by enhancing its efficiency.
Range: The range of a CB radio system, including the magnet mount antenna, depends on various factors, such as the terrain, atmospheric conditions, and the power output of your CB radio. Generally, a properly installed and tuned magnet mount antenna can provide communication over several miles.
Maintenance: Regular maintenance is essential to ensure the magnet mount antenna's longevity and performance. This includes checking the coaxial cable for damage, keeping the antenna clean, and ensuring that the magnet base remains securely attached.
Legal Considerations: Before using a magnet mount CB antenna, be sure to comply with local regulations regarding CB radio usage. These regulations may specify certain power limits, antenna height restrictions, and other rules.
In summary, magnet mount CB antennas are a convenient and versatile option for enhancing the performance of your CB radio while on the road. They are relatively easy to install and provide a good balance between portability and performance, making them popular among CB radio enthusiasts. Proper tuning and maintenance are essential for getting the best performance from a magnet mount CB antenna.
Below you can find our editor's choice of the best magnet mount cb antennas on the market
RoadPro (RP-711) 24" Magnet Mount Stainless Steel CB Antenna Kit
RoadPro
Product description
A sleek, slim easy-to-use solution for any CB application. Nine-foot coax cable offers plenty of length for most vehicles and strong magnetic base ensures your antenna stays put – no matter where the road takes you. Another great innovation from RoadPro, your trusted travel companion, bringing the comforts of home to on-the-go living.
- Center Loaded CB Antenna with 9’ Coax Cable
- Strong Magnetic Base
- Includes Magnet Mount, Coax Cable, and Antenna
User questions & answers
| Question: | Will this work with a ge 3-5869a 40 channel cb |
| Answer: | Yes, wll work with low swr's on all 40 channels |
| Question: | So how can it help my hand held cb radio? Does it plug in somehow |
| Answer: | My handheld CB had a adapter on it to hook up to it. If yours did not come with one, check and see if one is available for yours. All I had to do is tune it to my radio. |
| Question: | Can the antenna be changed with another one |
| Answer: | Not sure |
| Question: | What type of Range does this antenna have |
| Answer: | normal range for mobile CB with 4 watt output power can get 1 - 5 mile range depending on terrain, base to mobile with 4 watt power output can be 5 - 10 miles depending on terrain and base station antenna. |
Product features
RoadPro (RP-711) 24" Magnet Mount Stainless Steel CB Antenna Kit
With an aerodynamic design, this CB antenna kit has a 24 center loaded copper coil stainless steel CB antenna and a pre-wired magnetic mount base with 9' coax cable.
- 24 Center loaded copper coil stainless steel CB antenna
- Pre-wired magnetic mount base with 9' coax cable
- Aerodynamic design
K40 Model K-30 35" Magnet Mount Stainless Steel CB Antenna, 300 Watts
K40
Product description
K40 Model K-30 35" Magnet Mount Stainless Steel CB Antenna, 300 Watts
- 300 Watts AM Power Handling Capability (ICAS)
- 15' Pre-Wired RG-58AU 95% Shielded Coax Cable Stranded to Prevent Breakage
- 35", 17-7 Stainless Steel Whip Antenna
- Radius 180° Tip Eliminates Need for Ball
- Heavy-Duty 4" 10oz. Magnet
User questions & answers
| Question: | Is this a 26-28mhz aerial |
| Answer: | Mine came with a long whip that was centered on the high end of 26 Mhz out of the box. You will need to trim the whip to get the desired frequency range. Out of the box, mine was not tuned to the CB band (26.9 - 27.4 Mhz). I had to trim about an inch or two off, roughly. To cover the 10m Amateur band (28-29 Mhz) you would have to trim a lot more off. But note that the bandwidth of this antenna will not cover the entire 10m band. I believe mine will tune from 26.9 to 27.5 Mhz while remaining below 2:1 swr. |
| Question: | Work with uniden bearcat cb radio with sideband 980ssb? thanks |
| Answer: | yes. i have it on mine |
| Question: | how far is the range |
| Answer: | I wouldn't give $5.00 for a truck load of K-30s. I bought one and cannot get the SWR low enough to use it. On channel 1 the SWR is 1.2 , on channel 20 its 2.5 and on channel 40 its 3.2. That will burn up a radio. I talked to three other people who got one and have the same problem. A radio tech told me a wilson 1000 is the best. I haven't yet got one and just stopped using my cb till I can afford another antenna. |
| Question: | Do you have to drill a hole in truck to connect the cable from the anntena to cb or can it be run through window |
| Answer: | No drilling necessary. The antenna has transmission line ("coax") already attached to it - I forget the exact length, it's about 15 feet...with a common CB antenna connector at the end. The connector is called a "PL-259", it's cylindrical and measures between 0.720" - 0.730" (a trifle under 3/4") at the widest point. You can easily pass this through a window, but you might want to consider feeding the coax transmission line in around a weatherseal on a tilting window or hatch. The coax is about 1/4" diameter and most hatch-style windows easily close and latch over it without damage. The base of the antenna is magnetic, and does a very good job of holding the antenna in place. I mention this because I read somewhere Ford is introducing aluminum body trucks, hopefully nowhere we need antennas. Magnetic mounts won't work on aluminum. |
Product features
K40 Antenna, Base Load, 35 in.
This 35” stainless steel CB antenna with 300 Watt AM power handling capability (ICAS) and has a base loaded coil. 15' pre-wired RG-58AU 95% shielded coax cable includes a PL259 connector and 4” Heavy-duty 10 ounce magnet. The radius 180° tip eliminates need for a ball. Proudly made in the USA.
- 15' Pre-wired 95% shielded coax cable
- 17-7 stainless steel whip antenna
- Base loaded coil
Tram CB 5In Magnet Mount Antenna, Black (240-B)
TRAM
Product description
Choose tram for your next antenna installation Project with this CB 5 in. Magnet mount antenna (black). this antenna uses a 3/8 in. X 24 thread mounting. Stay connected with tram.
- Black steel Magnet housing
- 17ft low-loss rg-58 a/U coax cable: tinned copper braid 95%, solid insulation, stranded tinned copper center conductor
- Pl-259 male Connector
- 3/8 inch -24 thread mounting
- With rubber boot
User questions & answers
| Question: | Will this mount be able to hold a hustler 102inch whip |
| Answer: | It will not hold a 102 inch whip without the wind blowing it over all the time. You must use a short antenna on this or by the three bass magnetic for a 102 inch whip |
| Question: | Will this work with a radio from President electronics |
| Answer: | As should as long as the radio has a SO-139 connector. |
| Question: | What additional height does this add to a 28” antenna |
| Answer: | No more than 2 inches, I think. |
| Question: | Will it work on a tram3700 trucker antenna |
| Answer: | Yes this base takes an antenna with a 3/8 inch -24 thread mounting and that’s what the tram 3700 has. Buy it your good to go!!! |
Tram 269 Triple 5" Magnet CB Antenna Mount
Tram
Product description
This Tram Triple 5" Magnet CB Antenna Mount is sturdy and attractive with a black kote steel magnet housing. It comes with a 17-ft RG-58A/U coaxial cable, UHF male PL-259 and standard 0.375" x 24 thread CB mounting.
- Black Kote Steel Magnet Housing
- 17-ft Rg-58a/u Coaxial Cable
- Uhf Male Pl-259 Installed
- Standard 0.375" X 24 Thread Cb Mounting
User questions & answers
| Question: | Will this hold a 102 whip |
| Answer: | It holds my 102" wipe with the monster spring |
| Question: | Can this mag mount hold yaesu atas 120a |
| Answer: | I seriously doubt that ATAS-120A would work with this mount. First, the connector here is a CB mount connector and not UHF connector. Second, ATAS 120A requires direct connection to the body of the vehicle since the antenna is tuned by DC current and not AC. Unlike RF, DC cannot pass through the rubber and roof paint. |
| Question: | What ham radio antennas will work with the this? I'm looking for 2m/70cm. Thanks |
| Answer: | For a 2m/70cm antenna, you do not need this beefy of a mount. A 1/4 wavelength antenna is about 19 inches high. I use a Diamond MR77 mag mount that works great. If you were to use a 5/8 wavelength 2m antenna, something like a 5" mag mount would be good. This is more suited to a 7 1/2 foot HF type fiberglass whip or "maybe" one of the CB whips. I have one as a backup and like it. As of this writing, my primary HF antenna is a series of MFJ Hamtennas and a Diamond K-400 mount. Just make sure with this mount that you minimize capacitive reactance as good as possible if running HF or with an amp. I would put two mix 31 toroids in-line with about 6 turns each to make sure there is no RF on the coax if you use it for HF. For a 2m/70cm antenna, don't worry about any chokes. And also, for 2m/70cm, you do not need anywhere near the ground plane that HF requires. |
| Question: | Does this mag mount come with rubber covers on the magnets to protect the paintwork on the car roof |
| Answer: | Rubber covers would increase capacitive reactance...defeating any ground plane your car could offer as the other half of the antenna. The mount needs to make contact with the metal in order for the vehicle to serve as the other half of the antenna. While I'm sure it would have some effectiveness being close to the metal, it will not establish a ground properly. It does have a Mylar film on the bottom of the magnets, but moisture and scratches will get under any mag mount. Over time, any mag mount will rust around the edges where the Mylar film meets it. Some the contaminants are regular grit and grime, while some is brake dust and other components. I have this as a backup mount for vacations in other cars, etc. It would be possible to use it as a base antenna mount if 1/4 wavelength radials were fun out from the base. I use a Diamond K-400 mount as my primary mount. The mount is only part of the equation. It requires a decent antenna. My own antennas are an inexpensive answer. I use MFJ Hamtennas (fiberglass whips) for each HF band I use. They are about 7 1/2 feet high, but with a quick disconnect, it is closer to 8 feet high, plus the height of what they are mounted on. I would like a Scorpion screwdriver antenna if I had a spare $900 laying around... Any mag mount is only so strong. If mounted on the roof, I would recommend a cable to your rack in case you have a frontal collision. The mount would turn into a missile. That super grip is on thick metal in the ham radio or CB store. While it seems like a strong mount when you are trying to pull it loose from the roof of a car, it is in fact not nearly as strong. |
Stryker SR-A10MM Magnetic Mount CB & 10-Meter Radio Antenna
STRYKER
Product description
Stryker sr-a10mm magnetic mount Cb/10 meter radio Antenna
- 6 Gauge Solid Copper 100% Silver Plate Wire
- Extremely Efficient High “Q” Coil
- Powerful 5" diameter magnetic base
- 10,000 Watts Power Handling Capability
- 2 Year Warranty
User questions & answers
| Question: | How long is the coax |
| Answer: | 16-18’ |
| Question: | Can you use this with gmrs systems |
| Answer: | For gmrs you're going to want a genuine Nagoya UT-72. Btech has the genuine article. I swept it with a VNA and it has very low SWR through the GMRS band. I also have a Nagoya mag mount with the SMA connector - the UT-308UV and it's not as broad on UHF. Good for the 70cm ham band, but it's SWR doesn't stretch into GMRS range as well. |
| Question: | can this be used on a DX2547 base radio |
| Answer: | Your gonna find its a damn great antenna but most base stations have a taller antenna but paired with my Stryker 497 getting 17 miles roughly |
| Question: | How would this work on a cobra |
| Answer: | I run a Cobra 29 LX w/ an Astatic RD104 mic and this Stryker antenna. SWR’s are near flat across all 40, TX & RX are amazing. I definitely recommend this antenna. |
WILSON 305-38 300-Watt Little Wil Magnet Mount Antenna
Wilson Electronics
Product description
Small but mighty, the “Little Wil” is the perfect choice in a low-profile antenna with maximum performance. The large 10-ounce magnet ensures it will stay securely attached to your vehicle, and the heavy-duty coil features 14-gauge copper wire for the clarity you demand. Loyal Wilson customers agree, “You can’t go wrong with a Wilson antenna.”
- 300 Watts Power Handling Capability (ICAS)
- Large 10 oz magnet
- Heavy-Duty Coil Uses 14-Gauge Copper Wire
- 36" 17-7 PH Stainless Steel Whip Base Load Antenna
- Made with High Impact Thermoplastic. Low Loss Coil Design
User questions & answers
| Question: | is the magnetic mount part metal where it contacts your vehicles paint? or is there a rubber pad between the metal and the car |
| Answer: | 12 volt. |
| Question: | Does anyone know the frequency range on this antenna |
| Answer: | This unit is an analog scanner. |
| Question: | Does this come with CB coax cable |
| Answer: | Well, yes and no..... |
| Question: | does it come with a PL259 connector |
| Answer: | I have the BC23A Uniden Bearcat External Speaker. First, the speaker is an amplified speaker, so it requires a 12 volt DC power source. You can plug it into a 12 volt accessory outlet in a vehicle, or I use a 12 volt regulated power converter in my house. Second, the speaker has a mini stereo plug, so I do not know how you would plug it into a phone. There is no microphone in the speaker, so you would not be able to use it like a hands free device for your phone. It is intended to be an amplified external speaker for a radio or scanner. I use it with my Portable Pro-96 Digital Trunking scanner (although I had to use a stereo to mono plug adapter) and it works great. It gives me the extra volume I need to hear the scanner outside of the room, or above the noise in a moving vehicle. I am very pleased with the speaker for my intended use. |
ProComm JBC101 9" Magnet Mount Antenna
ProComm
Product description
ProComm JBC101 9 Magnet Mount Antenna
- 9" Super Flexible CB Antenna
- Powerful 3" Magnet with Protective Base
- Weatherproof Encapsulated Connections
- 10'' Low Loss RG58 Cable with PL259 Connector to fit any standard CB Radio
User questions & answers
| Question: | Is this antenna tuneable and if so, is there an easy way to tune it, or do you have to do some snipping |
| Answer: | The bottom magnet portion is covered in urethane (plastic), so it won't scuff your paint. I have been taking mine on and off my car dozens of times, and it leaves no mark. Magnetic holds securely. Hope this helps. |
| Question: | i neeed this faster how do ido that |
| Answer: | This antenna tunes the standard CB frequency range, 26.965 mhz to 27.405 mhz. You can tune it up into the 10 meter band, but as you shorten the antenna element, the bandwidth is reduced, the impedance moves away from the ideal 50 ohms, and the efficiency drops. Shortened CB antennas like this one are designed for short-range communication, (a few miles) so don't expect much range. While Wilson says it can be used on 10 meters, it's not going to work out very well for you. |
| Question: | Will the antenna tread into a a regular antenna mount |
| Answer: | Yes the standard 18ft or so with a PL259 connector on the end. Ready to hook up to any CB radio. |
| Question: | will this antenna pick up weather bands |
| Answer: | Yes, it comes with a PL259. Plug it in and away you go. |
CB Antenna 4" Magnet Kit w/RG-58 Coax & Rubber Boot, TRAM 300
Tram
Product description
Have the option to install your CB antenna kit on your roof or your trunk with this Magnet-Mount CB Antenna Kit from Tram(R). This antenna features weather-channel capability, 300W power handling and a 26 MHz-30MHz freq range. Your kit includes a 35", stainless steel whip, 3.5" magnet, a rubber boot on the magnet for scratch resistance and a 17-ft coaxial cable.
- 35 7/16" Stainless steel tapered .100" (2.5mm) whip
- Weather channel capability
- Excellent receive and transmit.17 ft. RG58A/U low-loss precision communication RF coax cable, tinned copper braid 95% shield, stranded tinned copper center conductor and solid insulation
- Pre-tuned for all CB frequencies
- Frequency range 26-30 MHz
- 4" Heavy duty magnet
- Rubber boot on magnet for scratch resistance
User questions & answers
| Question: | Will this work with a vhf mobile radio |
| Answer: | It is a cb antenna only. |
| Question: | Uniden 510xl swr to high 2:1 have a k30 antenna should i change and what kind of antenna |
| Answer: | Thats also a good antenna its up to you. |
| Question: | how long is the antenna from the magnetic base to the tip |
| Answer: | Mine is around 39-1/2 inches bottom of the magnetic base |
| Question: | Has anyone ever not received their 35 7/16" Stainless steel tapered 100" (2.5mm) whip in their shipments before because I didn't receive mine |
| Answer: | Never received the wip! |
TWAYRDIO TW-S90 SO239 Tri-Magnet Antenna Magnetic Mount with 5M Coaxial Cable for HF/VHF/UHF/CB Mobile Radio Antenna
Product description
TWAYRDIO TW-S90 SO239 Tri-Magnet Antenna Magnetic Mount with 5M Coaxial Cable for HF/VHF/UHF/CB Mobile Radio Antenna
- Magnetic Mount: SO-239 Connect with 5M (16.4ft) RG58 Coaxial Cable (PL-259 Plug)
- Mobile Transceiver Mount Magnetic Base Diameter: 90×3mm
- Magnetic Base Pull Strength 66 lbs.
- Suitable for all kind of PL259 HF/VHF/UHF/CB mobile antenna and SO239 mobile radio.
- Radio Antenna Base easy to install, plug and play installation.
User questions & answers
| Question: | Will this hold a 102” antenna |
| Answer: | Request "Next Day" shipping |
| Question: | What size antenna will fit this base |
| Answer: | Yes, that’s what I do with the antennas is thread them into a 3/8 mount. |
| Question: | How well foes it hold at interstate speeds |
| Answer: | No it will not. This antenna is for Citizens Band (CB). NOAA frequencies are on VHF (2 meters). There may be other NOAA stations on other bands, but I'm uncertain of this. However I don't believe they transmit on the band that antenna is tuned for. Hope this helps! |
Nagoya CB-72 28" CB Antenna (26-28 MHz), Center Coil-Loaded Heavy Duty Spring with Magnetic Mount, Includes 18' of RG-58A/U Cable with a PL-259 Connector
BTECH
Product description
The Nagoya CB-72 is a 70cm (~28 inch) CB antenna. It is designed to be used with your fixed mount or mobile mount CB radio. Easily install the antenna with the included heavy duty magnetic mount (the antenna must be magnetically installed for optimal antenna performance)
The CB-72 antenna, when mounted vertically is omni-directional which allows it to receive signal from all directions. It uses a very heavy duty rare earth magnet on its 3.5 inch magnetic mount and is the perfect antenna for cars, pickup trucks, vans, SUVs, and on tractors and semi-trucks.
With 18 feet of Heavy Duty RG-58A/U you are able to set up your Antenna on almost any vehicle application. The antenna itself is 4mm thick compared to the usual 2.5mm antennas found on most CB vehicle magnetic mounts.
Specs:
50 Ω (ohm)
V.S.W.R.: ≤ 1.5:1
Length: 28"
Color: Stainless Steel & Black
For use on: 26-28MHz (CB)
Package:
1x Nagoya CB-72 Antenna (with magnetic base and 18' Coax)
Allen Wrench for Assembly
Compatible with:
All Mobile CB Radios with UHF (SO-239) Connectors
- Easy To Install, Omni-Directional, Measures ~28.5 inches, Stainless Steel Antenna
- Extra Long 18' of Premium RG-58A/U Coax, the CB-72 Covers all CB frequencies, No tuning needed, Solid Brass NMO Mount with Satin finish, Gold plunger-type contact pin
- Includes a PL-259 connector (for connection right to common CB radio connections found on CB radios (SO-239 connector))
- Pairs Great with CB radios such as the Uniden PRO505XL or Bearcat 980SSB / 880, or with the Cobra 19 DX IV,
- Heavy Duty Magnetic Mount (3.5"); Note the antenna must be magnetically mounted for the best performance and lowest SWR
User questions & answers
| Question: | Is there a rubber pad over the magnet |
| Answer: | Yes there is a rubber pas over the magnet. It has a good magnet and won’t fly off coming down the road |
RoadPro RP-707 36" Magnet Mount CB Antenna Kit,Black
RoadPro
Product description
Hit the road without missing a beat. This magnet mount CB antenna delivers improved performance, wherever your active lifestyle takes you. Attach the strong, sturdy magnetic base to your truck, SUV or RV and count on better communications - loud and clear. Another great innovation from RoadPro, your trusted travel companion, bringing the comforts of home to on-the-go living.
- Package quantity:1
- Product Type:ANTENNA
- Package weight:1.2 lb
- Package dimensions:102.235 cm L x 12.7 cm W x 7.62 cm H
User questions & answers
| Question: | Will this fit my uniden |
| Answer: | Yes, But I would not go over 80 MPH with it, it will fly off of the car or truck, and do some damage. I had a 4 magnet mount and it worked well, but I did not speed with it....Jim |
| Question: | is the magnet inside this antenna mag. mount considered a ground |
| Answer: | That's not an easy answer, a Wilson 5000 and Stryker sr-a10 antenna will fit. Basically any antenna, that screws in, like the 2 I mentioned will work. Only thing is, they don't screw down flush with the tri-magnet base. There's going to be a little gap, you can either get 1 or 2 washers and close gap that way or, you can get some rubber or neoprene and make a gasket for it. Either way will work, you can even use gasket maker, and make a water tight seal. Hope that helps out |
| Question: | is this a good antenna folks-honestly? just ordered one today |
| Answer: | Great with speed just bulky looking |
| Question: | Is this antenna adjustable and easy tuning and good for a uniden pro520 cb radio |
| Answer: | No snipping! Remove the cap at the top of the antenna and you'll find a Phillips head screw. Turn the screw to adjust your SWR. |
TRAM 703-HC Center Load CB Antenna Kit
Tram
Product description
Get your CB connected with the Center Load CB Antenna Kit from Tram. 703-HC includes a 2" tall antenna that covers all CB frequencies, 3" magnet mount, shock spring, stainless steel whip and 9.5-feet RG58 cable with PL-259.
- Covers all CB frequencies
- Includes 3.5" magnet mount, shock spring, stainless steel whip & 17ft RG58 cable with PL-259
- Great for all your needs
- 2 Feet Tall
- Covers All Cb Frequencies
- Includes 3.5" Magnet Mount, Shock Spring, Stainless Steel Whip & 17- Feet Rg58 Cable Pl-259
User questions & answers
| Question: | is it magnetic or does it have glue |
| Answer: | The base is attached to the top of your car or truck by a strong magnet. No glue is involved. This device is designed to be easily removable and moved to another vehicle or protected from car washes. |
| Question: | Judt got this and i get just static when mounted on my truckroof |
| Answer: | Static is normal on CB radios, Some days are much clearer than others, mainly due to skip conditions. Try adjusting RF gain if your CB has one or use the squelch control. Both are forms that adjust to mask out noise but will reduce pickup ability on the receiving end. It is somewhat of an art form. Experiment with one or both. |
| Question: | will this work on Uniden 800 MHz 300-Channel Base Mobile Scanner (BC355N |
| Answer: | no, CB antenna's are tuned to 26 to 27 Mhz, You need a scanner antenna, most of which are tuned to 25 to 1300 Mhz |
| Question: | Can I tune the Antenna |
| Answer: | The top of the antenna is adjustable via a set screw to tune if you use an SWR meter. |
HYS TC-155 6.1inch NMO Magnet Antenna Mount for CB Radio W/5M(16.4ft) RG58 Coaxial Cable PL-259 Plug
- NMO Connection Style W/5M(16.4ft) RG58 Coaxial Cable PL-259 Plug
- NMO Mount Magnetic base:Base Diameter: 155mm/ 6.1"
- Size 6.1" Magnetic Base Pull Strength 43.9 lbs
- Suitable for all kind of NMO antenna and SO239 mobile radio
- The magnetic base Easy to install, plug and play installation.
User questions & answers
| Question: | Can you mount a fire stick antenna to this magnetic base |
| Answer: | 11 meter 1/2 wave |
| Question: | Will this work on an 80 watt |
| Answer: | I am Ham operator, I took this antenna shortened it to work on 10 meters. I have it in my attic and it works awesome, I have been able to work many country's. I'm sure your idea will work fine. |
Product features
Installation Positions
Magnetic Base in the different installation positions, the effect is different.
Note: HYS TC-155 Magnetic base support install antenna of length less than 1.5m and weight less than 0.5kg-0.8kg. And the magnetic base main function fixed antenna, the radio talk distance was related to antennas.
Latest Reviews
View all
Dpi Portable Dvd Players
- Updated: 10.06.2023
- Read reviews
Swim Cap With Ears
- Updated: 07.02.2023
- Read reviews
Plate Carrier For Men
- Updated: 16.04.2023
- Read reviews
Infant Walking Shoes
- Updated: 18.02.2023
- Read reviews
Neiko Pliers
- Updated: 24.01.2023
- Read reviews