A battery holder for AA batteries is a simple yet essential accessory in the realm of electronics and household devices. It serves as a container or housing for one or more AA batteries, providing a secure and organized way to power various gadgets and devices.Here are some key points about battery holders for AA batteries:
Design: Battery holders for AA batteries are typically designed to hold one, two, three, or more AA batteries, depending on the specific requirements of the device they will be used in.
Compatibility: AA battery holders are specifically designed to accommodate AA-sized batteries, which are among the most common and widely used household batteries.
Materials: These holders are commonly made from durable materials such as plastic or metal, ensuring the batteries are well-protected and insulated.
Connections: Battery holders feature metal contacts or connectors that make electrical contact with the positive and negative terminals of the AA batteries. These contacts are typically designed to securely hold the batteries in place while maintaining a reliable electrical connection.
Wire Leads: Some battery holders come with wire leads attached to the contacts, allowing for easy integration into electronic circuits or devices. These wire leads can be connected to other components or soldered onto PCBs (printed circuit boards).
Spring-Loaded Contacts: Many AA battery holders feature spring-loaded contacts that exert a slight pressure on the batteries when inserted. This ensures good electrical contact and prevents the batteries from falling out due to vibrations or shocks.
Polarity Markings: Most AA battery holders have polarity markings to indicate the correct orientation for inserting the batteries. This ensures that the positive and negative terminals of the batteries align correctly with the contacts in the holder.
Applications: Battery holders for AA batteries are used in a wide range of applications, from powering remote controls and flashlights to serving as a power source for electronic DIY projects and prototypes.
DIY Electronics: These holders are popular in the world of do-it-yourself (DIY) electronics and prototyping because they provide a convenient way to add and replace batteries in projects without soldering.
Versatility: AA battery holders are versatile and can be found in various configurations, including single-cell holders, multi-cell holders, and holders with built-in switches for easy power control.
Maintenance: Maintaining a clean and corrosion-free environment within the battery holder is important to ensure proper electrical contact and the longevity of the batteries.
In summary, a battery holder for AA batteries is a practical accessory that simplifies the use of AA batteries in various electronic devices and DIY projects. Its design and materials ensure a secure, organized, and reliable power source for a wide range of applications, making it a valuable component in the world of electronics and household devices.
Below you can find our editor's choice of the best battery holder for aa on the market
: LAMPVPATH
Specification:
<1>Type of AA Battery Holder: 2 aa battery holder, 2x 1.5V aa battery holder with wires
<2>Voltage Output of One Double A Battery Holder: 3V, 2 x 1.5v aa batteries = 3v aa battery holder
<3>Dimensions of Battery Holder for AA: (L*W*H)/2.303" x 1.276" x 0.575"/5.85cm x 3.24cm x 1.46cm
<4>Leads of 2 Cell AA Battery Holder: all the 2 aa battery holder with leads, they are tinned wire end
<5>Wires Length of 2 AA Battery Holder with Wires: 5.9"/15cm
<6>Wires Diameter(count in the PVC isolation around the wire): 0.0393"/1mm
<7>Wires Color of Battery Holders: red and black, the red cable contact the positive side of the aa battery holder pack, and the black cable contact the negative side of the 2 aa battery holder pack.
<8>Color of AA Battery Box: black
<9>Material of AA Battery Holder Case: plastic ABS
<10>Weight of One 2 AA Battery Holder with Wires: 0.247oz/7g
<11>If 2AA Battery Holder has ON/OFF Switch: no
<12>If 2xAA Battery Holder has Cover: no
Package Contents:
3x 2 aa battery holder with leads
| Product Dimensions | 2.3 x 1.27 x 0.57 inches |
|---|
| Question: | What size are the fastener holes |
| Answer: | 1/8" |
| Product Dimensions | 2.3 x 1.27 x 0.57 inches | " }, "aggregateRating": { "@type": "AggregateRating", "ratingValue": "4.7", "reviewCount": "250" }, "offers": { "@type": "Offer", "url": "https://www.amazon.com/dp/B07TB4HDYH?tag=bfyall-20&linkCode=osi&th=1&psc=1", "priceCurrency": "USD", "price": "5.99", "priceValidUntil": "2023-07-01", "itemCondition": "http://schema.org/NewCondition", "availability": "https://schema.org/InStock", "seller": { "@type": "Organization", "name": ": LAMPVPATH
|---|
| Product Dimensions | 2.3 x 1.27 x 0.57 inches | " } } }
|---|
| Question: | How much power can this system handle? (How much current/amperes can pass through the cables |
| Answer: | The package does not state. The average alkalin has 1700 mAh, so 8 X 1700 = 13,600 mAh. The leads aren't very heavy, so you may have to solder on heaver leads if your moving up to high amp batteries. |
| Question: | Can i take two of the boxes and put the wires together to plug into a transmitter at an increased voltage and mah |
| Answer: | If you wire them in series, you will double the voltage but wiring them in parallel the voltage will remain the same. Milli-amp hours is determined by the quantity of batteries so that will double either way. Please keep in mind that amp hours is not the same as watt hours. |
| Question: | How can this mount to a wall? Can you attach it with screws |
| Answer: | no. i will have to 3d print a mounting case to attach it to my ardinio controller |
: LAMPVPATH
Specification:
<1>Type of AA Battery Holder: 4 aa battery holder, 4x 1.5V aa battery holder with wires
<2>Voltage Output of 4AA Battery Holder: 6V, 4 x 1.5v aa batteries = 6Volt battery holder
<3>Dimensions of 4 Cell AA Battery Holder: (L*W*H)/2.248" x 2.457" x 0.622"/5.71cm x 6.23cm x 1.58cm(L*W*H)
<4>Leads of AA Battery Holder: all the 4 aa battery holder with leads, tinned wire end
<5>Wires Length of 6V Battery Holder: 5.9"/15cm
<6>Wires Diameter(count in the PVC isolation around the wire): 0.0393"/1mm
<7>Wires Color of Battery Holders: red and black, the red cable contact the positive side of the aa battery holder with wires, and the black cable contact the negative side of the aa battery pack with wires.
<8>Color of 4 AA Battery Box: black
<9>Material of 4 AA Battery Holder Case: plastic ABS
<10>Weight of One 4 AA Battery Holder with Leads: 0.459oz/13g
<11>If 4AA Battery Holder has ON/OFF Switch: no
<12>If 4xAA Battery Holder has Cover: no
Package Contents:
2x 4 aa battery holder with leads
| Product Dimensions | 2.25 x 2.46 x 0.62 inches |
|---|
| Product Dimensions | 2.25 x 2.46 x 0.62 inches | " }, "aggregateRating": { "@type": "AggregateRating", "ratingValue": "4.6", "reviewCount": "250" }, "offers": { "@type": "Offer", "url": "https://www.amazon.com/dp/B07T7MTRZX?tag=bfyall-20&linkCode=osi&th=1&psc=1", "priceCurrency": "USD", "price": "5.98", "priceValidUntil": "2023-07-01", "itemCondition": "http://schema.org/NewCondition", "availability": "https://schema.org/InStock", "seller": { "@type": "Organization", "name": ": LAMPVPATH
|---|
| Product Dimensions | 2.25 x 2.46 x 0.62 inches | " } } }
|---|
| Question: | how many cases does it come with |
| Answer: | There are two battery cases in what I received. In the picture the two cases have the case cover off to the left side. |
| Question: | is there any way to un-'wire' the switch so i can connect leads to this to make the switch somewhere else (putting this in a cosplay model |
| Answer: | I soldered wires to use in a severed arm prop where switch was 2’ from motor it turned on and off. |
| Question: | The photo shows two battery holders. i just ordered this and there was only one in the package. Is the picture misleading or was I suppose to get |
| Answer: | I received two(2) holder in one plastic bag when I received my order! I'm sure Amazon or the seller will send you the correct qty if you contact them. |
| Question: | Are these in series or parallel |
| Answer: | Series, for a total of 6V when using 1.5V cells. |
Great 4 AA battery holder for your Arduino project! These are great for replacements for electronic devices that have a lost or damaged battery holder. Provides 6V output when used Alkaline batteries, 4.8V when used with rechargeable AA. These AA battery holders feature a standard snap connector on one end. The case is made from ABS plastic with nickel plated springs to hold your AA batteries in place. Each battery holder measures 2 7/16" x 2 3/8" x 5/8"( L * W * H ). AA batteries in these holders will last much longer than a standard 9V battery will when powering up electronic projects. AA batteries not included.
For use in SentrySafe models that begin with A3, A4, A5; J3, J4, J5; S0, S3, S4, S5, S6, S7, S8, SB, SBW, SC, SW; J3, J4, J5; L0, L3; V: Replaces Sentry Safe part number BP4AA. Also for use with the Schlage Connect Deadbolt devices. This is also a direct replacement for the Delta Faucet battery pack part number RP30532.| Question: | Does this work for the schlage encode |
| Answer: | The connector matches th standard 9 volt battery format and supplies 6 volts. If that is what the schlage encode needs then it will work. I used mine to power a Sentry safe with an electronic keypad. |
Specification
Material: plastic, metal.
Colour: Black.
Cable length: 10cm / 3.94Inch.
Dimensions: 108.62 x25.85 x17.26mm / 4.28x1.02x0.68 inches.
Quantity: 2PCS battery holder, 2 PCS snap connectors.
Feature
Made of high-quality materials, good conductivity, sturdiness and durability, and long service life.
Can accommodate 4 x 1.5V AA batteries, using alkaline batteries can output 6V, and using rechargeable AA batteries can output 4.8V.
Easy to solder or connect.
: LAMPVPATH
Specification:
<1>Battery Type: 4 aa battery holder switch, 4x 1.5V aa battery holder with cover
<2>Voltage Output of One 4 AA Battery Holder: 6V, 4x 1.5v aa battery= 6 volt aa battery holder
<3>AA Battery Holder Switch Function: ON/OFF switch on 4 aa battery holder, it's the 4 aa battery holder with on off switch
<4>AA Battery Holder Wire Leads: 4 aa battery holder with leads, tinned wire end
<5>4 AA Battery Holder Wire Length: 5.7"/14.5cm
<6>Cable Diameter(count in the PVC isolation around the wire): 0.0393"/1mm
<7>Battery Holder Cable Color: red and black
<8>Dimensions of 4 AA Battery Holder: (L*W*H)/2.677" x 2.535" x 0.760"/6.8cm x 6.44cm x 1.93cm
<9>Weight of 4 AA Battery Holder with Switch: 1.27oz/36g (one battery holder with one screw weight)
<10>Color of 6V Battery Holder With Switch: black
<11>Material of 4 AA Battery Holder with Leads and Switch: Plastic ABS
<12>Screw Size: 0.303" x 0.0787"/7.7mm x 2.0mm(Length*Diameter)
Package Contents:
2x 4 aa battery holder with switch
2x screws for aa battery holder 4
| Manufacturer | LAMPVPATH |
|---|
| Question: | What gauge wire are the leads? Thanks |
| Answer: | don't know about gauge but the wire with casing is around 1/16" thick/wide and the bare wire is around 1/32" thick/wide. hope that helps |
| Question: | Do they have a timer |
| Answer: | No timer ....just an on/off switch. |
| Question: | How many packs do i get |
| Answer: | 3 individual packs |
| Question: | Is this in series or parallel |
| Answer: | this is in series. |
| Manufacturer | LAMPVPATH | " }, "aggregateRating": { "@type": "AggregateRating", "ratingValue": "4.5", "reviewCount": "250" }, "offers": { "@type": "Offer", "url": "https://www.amazon.com/dp/B07L9M6VZK?tag=bfyall-20&linkCode=osi&th=1&psc=1", "priceCurrency": "USD", "price": "6.99", "priceValidUntil": "2023-07-01", "itemCondition": "http://schema.org/NewCondition", "availability": "https://schema.org/InStock", "seller": { "@type": "Organization", "name": ": LAMPVPATH
|---|
| Manufacturer | LAMPVPATH | " } } }
|---|
| Product Dimensions | 7.87 x 1.57 x 1.18 inches |
|---|
| Question: | Will this fit a cr2 battery |
| Answer: | This 23A battery holders don't fit the cr2 battery, because the cr2 battery is bigger than 23a battery, so it doesn't fit. We recommend to search the 14250 battery holder to fit the cr2 battery. |
| Question: | Idk much about electronics and stuff but if i combined 2 of these packs would it be 12v or still 6 just more battery |
| Answer: | One of the 4-cell holders should produce 6 volts. If you connect two of those holders in series, it would produce 12 volts. To connect in series mode, just attach the black wire from one pack to the red wire from the other pack. At this point, the voltage on the free black and red wires should be 12 volts. Connected in parallel, you would get 6 volts output with longer "life" than a single pack. For parallel (6-volt) mode, just connect the two red wires together and the two black wires together. |
| Question: | Does it have a ON off switch |
| Answer: | This particular item does not have an On/Off switch. |
| Question: | For the holders with more than one battery, the batteries would be in series, right |
| Answer: | Correct. 3 volt output on the 2 battery style and 6 volt on the 4 battery style. I was wondering the same thing, but I eventually just had to order them for a class and find out. I have not come across parallel battery holders, but I haven't looked that hard either. Good luck. |
| Question: | Is there a rechargable battery pack version |
| Answer: | Not that I know of. You could use individual AA rechargeables or regular batteries in it. |
| Question: | What is the AWG# of the wires included |
| Answer: | 22 AWG multi-strand. Comes in a two-pack. Works really well. You will need a tiny screw to lock the box closed. I've been happy with mine. I use it as an exterior power supply to an antenna tester, then if a battery leaks it is not going to damage a very expensive piece of equipment. |
| Question: | Can we use this outdoors |
| Answer: | If you are thinking about a permanent or semi-permanent outdoor installation, then no. There are no gaskets that seal the unit. |
| Question: | What are the mah of this battery pack |
| Answer: | if using an alkaline battery anywhere between 1700 to 2850 milliamp hours per battery |
| Product Dimensions | 7.87 x 1.57 x 1.18 inches | " }, "aggregateRating": { "@type": "AggregateRating", "ratingValue": "4.6", "reviewCount": "250" }, "offers": { "@type": "Offer", "url": "https://www.amazon.com/dp/B013GNC08C?tag=bfyall-20&linkCode=osi&th=1&psc=1", "priceCurrency": "USD", "price": "7.99", "priceValidUntil": "2023-07-01", "itemCondition": "http://schema.org/NewCondition", "availability": "https://schema.org/InStock", "seller": { "@type": "Organization", "name": ": WAYLLSHINE
|---|
| Product Dimensions | 7.87 x 1.57 x 1.18 inches | " } } }
|---|
